Manual Behringer CT100

6 pages 0.44 mb
Download

Go to site of 6

Summary
  • Behringer CT100 - page 1

    CABLE TESTER CT100 Version 1.0 April 2001 Users Manual ENGLISH www.behringer.com ...

  • Behringer CT100 - page 2

    CABLE TESTER CT100 2 1 . INTRODUCTION Congratulations! With the CT100, you have purchased an indispen- sable tool that enables you to easily check the most common cables used by musicians and sound engineers. Faulty cables are a common cause of failure in live and studio situations. This micro- processor-controlled device was designed to ensure fas ...

  • Behringer CT100 - page 3

    CABLE TESTER CT100 3 3 . INSTALLED CABLE TESTER MODE This mode enables you to test cables in fixed installations or situations that dont allow you to connect both ends of the cable to the CT100. + Hold down the RESET button while moving the ON switch to the CABLE TESTER position. The ON LED will blink to indicate that the CT100 is in INSTALLED C ...

  • Behringer CT100 - page 4

    CABLE TESTER CT100 4 TEST TONE MODE may be used to check signal flow and to facilitate level adjustments. It routes a test tone to the + pin (pin 2/tip) of all OUT jacks. Use the TEST TONE LEVEL switch to choose between +4 dBu, -10 dBV, or -50 dBV mic level. Please note that this mode is not intended to work as a voltage standard and that bat ...

  • Behringer CT100 - page 5

    CABLE TESTER CT100 5 XLR connectors (pin numbers visible on connectors) RCA connector 7. WARRANTY For our current warranty terms, please refer to our website at http://www.behringer.com, or send us a request via e-mail at support@behringer.de, fax at +49 2154 920 665, or telephone at +49 2154 920 666. 8 . MULTILINGUAL DOCUMENTATION + The following ...

  • Behringer CT100 - page 6

    CABLE TESTER CT100 6 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechn ...

Manufacturer Behringer Category Power Roller

Documents that we receive from a manufacturer of a Behringer CT100 can be divided into several groups. They are, among others:
- Behringer technical drawings
- CT100 manuals
- Behringer product data sheets
- information booklets
- or energy labels Behringer CT100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Behringer CT100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Behringer CT100, service manual, brief instructions and user manuals Behringer CT100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Behringer CT100.

Similar manuals

A complete manual for the device Behringer CT100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Behringer CT100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Behringer CT100.

A complete Behringer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Behringer CT100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Behringer CT100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Behringer CT100, that we can find in the current document
3. Tips how to use the basic functions of the device Behringer CT100 - which should help us in our first steps of using Behringer CT100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Behringer CT100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Behringer CT100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Behringer CT100?

Use the form below

If you did not solve your problem by using a manual Behringer CT100, ask a question using the form below. If a user had a similar problem with Behringer CT100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)