English dropdown-ico

Manual Avaya 106760804

764 pages 3.41 mb
Download

Go to site of 764

Summary
  • Avaya 106760804 - page 1

    Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, Softwa re Version 6.1 Doc. No. 10-300090 Issue 1 January 2004 ...

  • Avaya 106760804 - page 2

    Command Reference Guide for the A vaya P580 and P882 Multiservi ce Sw itches, Sof tware V ersion 6.1 Copyright A vaya Inc., 2004 ALL RIGHTS RE SER VED Pr oduced in USA, January 2004 The produc ts, speci ficati ons, and oth er tec hnical info rmatio n regardi ng the prod ucts conta ined in t his documen t are subjec t to change wit hout noti ce. All ...

  • Avaya 106760804 - page 3

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 iii T able of Content s Chapter 1 — Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Command Mode Summaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Entering and Exiting t ...

  • Avaya 106760804 - page 4

    iv Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s show appletal k globals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 show appletal k interf ace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 show appleta ...

  • Avaya 106760804 - page 5

    Docu ment N o. 10 -3 00 090 , Issu e 1 v Table of Contents ip dvmrp min-rout e-flash-update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 ip dvmrp neigh bor-probe-i nterval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 ip dvmrp neigh bor-timeout . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 6

    vi Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s Chapte r 10 — Int ellige nt Mu lticast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 clear cg ...

  • Avaya 106760804 - page 7

    Docu ment N o. 10 -3 00 090 , Issu e 1 vii Table of Contents clear tcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8 interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9 ip address . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 8

    viii Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s show ip route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-59 show ip route s ummary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-60 show ip ...

  • Avaya 106760804 - page 9

    Docu ment N o. 10 -3 00 090 , Issu e 1 ix Table of Contents ipx sap-multipl ier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-25 ipx sap-name- filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-26 ipx sap-net work-filter . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 10

    x Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s Chapter 16 — Loggi ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1 logging ...

  • Avaya 106760804 - page 11

    Docu ment N o. 10 -3 00 090 , Issu e 1 xi Table of Contents ip ospf as- boundary-router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-12 ip ospf aut hentication-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-13 ip ospf aut o-vlink-create . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 12

    xii Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s set port auto-negoti ation-speed- advertiseme nt . . . . . . . . . . . . . . . . . . . . . . . 21-10 set port auto-vlan-c reate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-11 set port category . . . ...

  • Avaya 106760804 - page 13

    Docu ment N o. 10 -3 00 090 , Issu e 1 xiii Table of Contents Chapter 23 — 80-Series QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-1 access-li st . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 14

    xiv Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s snmp-server us er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-12 snmp-server view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-14 show sn ...

  • Avaya 106760804 - page 15

    Docu ment N o. 10 -3 00 090 , Issu e 1 xv Table of Contents show spantree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-26 show spantree blocked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8-28 show spantree config . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 16

    xvi Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s dir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-37 erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 17

    Docu ment N o. 10 -3 00 090 , Issu e 1 xvii Table of Contents Chapter 32 — User I nterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-1 configure . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Avaya 106760804 - page 18

    xviii Comm and Refere nce Guid e for the Av aya P580 and P882 M ultiservi ce Switc hes, v6 .1 Table o f Content s Chapter 34 — VRRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-1 ro ...

  • Avaya 106760804 - page 19

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 1-1 1 Overview This chapt er descri bes: ■ Command Mode Summaries ■ Enteri ng and Exiti ng the Command Mode s ■ Basic Fun ctions ■ Accessi ng the CLI Command Mode Summaries The CLI for t he A vaya P580 a nd P882 Multiser vice swit ches consi sts of various ...

  • Avaya 106760804 - page 20

    Chapt er 1 1-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Entering and Exiting the Command Modes See Ta b l e 1 - 2 for an e xplanati on of how to acce ss and exi t the command modes. T able 1-2. Entering and Exiting the Command Modes Router Configurati on Commands t o configure th e routi ng protocol s. F ...

  • Avaya 106760804 - page 21

    Docu ment N o. 10 -3 00 090 , Issu e 1 1-3 Overview Basic Funct ions This sect ion pro vides inf ormation a bout the f ollowing s witch func tions: ■ Help ■ Command Syn tax Conventi ons ■ No Form Commands ■ Command Li ne History Keys Help Enter a que stion mark ( ? ) a t the syst em prompt to display all of the commands in a mod e. See Ta b ...

  • Avaya 106760804 - page 22

    Chapt er 1 1-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Command Syn t ax Conventions See Ta b l e 1 - 4 for an e xplanati on of the c ommand syntax c onventions . T able 1-4. Comm and Syntax Conventions No Form Com mands Most CLI command s have a no form . In g enera l, t h e no form disables a featur e/ ...

  • Avaya 106760804 - page 23

    Docu ment N o. 10 -3 00 090 , Issu e 1 1-5 Overview Accessing the CLI There are two ways to a ccess the A vaya P550R, P580, P 880, and P882 Multise rvice Swit ch CLI: ■ Using te lnet ■ Using a s erial interf ace Accessing th e CLI Using T elnet T o access the CLI using t elnet: 1. Obtain the name and p assword for the user account yo u will be ...

  • Avaya 106760804 - page 24

    Chapt er 1 1-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ...

  • Avaya 106760804 - page 25

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 2-1 2 AFT Ove rview This chapt er descri bes the f ollowing c ommands: ■ clear a ft in sta nce in val id- le arn ed- entr ie s vl an ■ clear a ft in sta nce le arn ed- en tri es vl an ■ set aft age tim e ■ set af t auto -sizing- threshol d ■ set aft ent ...

  • Avaya 106760804 - page 26

    Chapt er 2 2-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear a f t in st ance invali d-le arned- ent ries v lan Command Mode Global Conf igurati on. Descr iption Delet e all le arned ent ries fr om a partic ular AFT ins tance. Syntax clear a ft inst ance in valid-lear ned-e ntries vl an { <vlan- id&g ...

  • Avaya 106760804 - page 27

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-3 AFT clear af t inst ance lear ned-entr ies vlan Command Mode Global Confi gur at io n. Description Delete all l earned en tries an d inval id learn ed entri es from a pa rticu lar AFT inst anc e. Synt ax clear aft ins tance lea rned-ent ries vlan { <vlan -id> | name <vlan-name> } Sample Output ...

  • Avaya 106760804 - page 28

    Chapt er 2 2-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set af t ageti m e Command Mode Global Conf igurati on. Descr iption Sets the AFT age t ime. The defa ult time i s 300 seco nds. Syntax set aft aget ime <age-t ime-v alue > Sample Output The foll owing exa mple sets the aft a ge time to 350 se ...

  • Avaya 106760804 - page 29

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-5 AFT set af t auto-sizi ng- thres hold Command Mode Global Confi gur at io n. Description Se ts th e AF T auto siz ing th res hold ( per cen tag e b efo re aut o-i ncre men ting hash tabl es). The def ault per centage i s 40%. Synt ax set af t auto-s izing -thresho ld <thr eshold- value> Sample Output ...

  • Avaya 106760804 - page 30

    Chapt er 2 2-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set af t entr y Command Mode Global Conf igurati on. Descr iption Creat es a static AFT entr y or modify an ex isting stati c or learned AFT entry . The negat ive form of this command deletes a static or learn ed aft ent ry . Syntax T o Configure : ...

  • Avaya 106760804 - page 31

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-7 AFT priority Options include: • normal - The AFT entry has norm al priority . • high - The AFT entry has high prio r ity . sa-prior ity port Uses the pri ority of the physical port, Cis co ISL tag, or 802.1p tag to determine the layer 2 priori ty of frames. sa-priority aft Uses the priority that is ass ...

  • Avaya 106760804 - page 32

    Chapt er 2 2-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output T o. . . Enter . . . Set an aft entry on “Default” vlan, with a por t bin ding opti on of “forward,” a per sistence o ption of “ageout” and a “n ormal” priori ty set aft en try 44:44 :44:44:44 :44 vlan name “Default? ...

  • Avaya 106760804 - page 33

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-9 AFT Systems P550R, P580, P880, and P882. • Associate MAC address 00:00:00: 00:00:55 with port 1 on the module in slo t 3 and with VLAN 50. • Forward frames that have a source or destinatio n MAC address of 00:00: 00:00:00 :55. • A ssign a prior ity of 7 to packets th at have a dest ination MAC addr e ...

  • Avaya 106760804 - page 34

    Chapt er 2 2-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 set af t inst ance vlan (auto-i ncrement) Command Mode Global Conf igurati on. Descr iption Sets the auto- increment flag for a partic ular VLAN’ s AFT instance. Syntax set aft instanc e vlan {<vlan- id> | name <vlan-name>} au to-incr ...

  • Avaya 106760804 - page 35

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-1 1 AFT set af t inst ance vla n (hash-t able-size) Command Mode Global Confi gur at io n. Description Sets the hash table si ze for a p articul ar VLAN’ s AFT instance. Synt ax set a ft inst anc e vl an { <vlan-id > | name <vlan-name> } hash- table -siz e {16 | 32 | 64 | 1 28 | 256 | 5 12 | 10 ...

  • Avaya 106760804 - page 36

    Chapt er 2 2-12 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 set af t supe r- age ti me Command Mode Global Conf igurati on. Descr iption Sets the AFT super age tim e. The defau lt is se ven (7) day s. Syntax set aft super -agetime <supe r-a ge-time- value> Sample Output The foll owing exa mple sets the ...

  • Avaya 106760804 - page 37

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-13 AFT show af t config Command Mode User . Description Displays the AFT’ s global configur ation. Synt ax show aft config Sample Output The following e xample d isplays t he aft mana ger confi guration table. > show af t co nfig AFT Manager Configuration: ========================== Age Time: 300 Super ...

  • Avaya 106760804 - page 38

    Chapt er 2 2-14 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show aft entry Command Mode User . Descr iption Perfor ms a s earc h fo r a ll o f the A FT en trie s th at ma tc hes the cr iter ia specifi ed in the command. Syntax show aft e ntry [mac <wil dcar d-mac-addr ess> ] [vlan { <vlan-i d> | ...

  • Avaya 106760804 - page 39

    Docu ment N o. 10 -3 00 090 , Issu e 1 2-15 AFT Sample Output The following e xample d isplay th e aft ent ry table . > show af t en try Systems P550R, P580, P880, and P882. AFT Entries matching search criteria: “All Entries” ===================================== ============= MAC Address Port Valid VlanID Priority Persistence Status 01:80:C ...

  • Avaya 106760804 - page 40

    Chapt er 2 2-16 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show af t ins t a n ce Command Mode User . Descr iption Displa ys t he AF T in stan ce for a p art icul ar VL AN o r sh ow a ll A FT in sta nces for al l VL A Ns . If no V LAN par a me te r is s pec ifie d, all ins tanc e s sh ow on the sw itch. Syn ...

  • Avaya 106760804 - page 41

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 3-1 3 App let alk Ove rview This chapt er descri bes the f ollowing c ommands: ■ applet alk acces s-group ■ applet alk acces s-list ■ applet alk addre ss ■ applet alk admin-s tate ■ applet alk cable -range ■ applet alk echo ■ applet alk mac-fo rmat ? ...

  • Avaya 106760804 - page 42

    Chapt er 3 3-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 applet alk access-g roup Command Mode Interf ace Config uration. Descr iption Assig n an access list t o an Apple talk inter face. The no form of th is command r emoves the a ccess li st from th e inte rface. Syntax Sample Output The foll owing exa ...

  • Avaya 106760804 - page 43

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-3 Appletalk applet alk access- list Command Mode Global Confi gur at io n. Description Creates an Applet alk Access List. T he no form of this command r emoves an Appletalk Access List . The defau lt is to permit all zone s and all NBP objects. The access list app lies to e ither an Appletalk zone name or to ...

  • Avaya 106760804 - page 44

    Chapt er 3 3-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output The foll owing exa mple disab les Applet alk acces s list 630. (configuration)# no appl etalk acce ss-lis t 630 Syst ems P550R, P580, P880, an d P882. additional-zones Additional zone names. This keywor d defines the default action to ...

  • Avaya 106760804 - page 45

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-5 Appletalk applet alk address Command Mode Interfa ce Configur ation. Description Co nfi gur e an A ppl e talk Phas e I A ddr ess fo r an interf ace . The no f orm o f this com m an d remo ves the Ap pl et alk i nte rfac e its e lf. Synt ax Systems P550R, P580, P880, and P882. To E n a b l e : appletalk add ...

  • Avaya 106760804 - page 46

    Chapt er 3 3-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 applet alk admin- st ate Command Mode Interf ace Config uration. Descr iption Set t he adminis trative state of an Appleta lk Interfa ce. The defa ult value is up. Syntax appleta lk admin -s tat e {up | down} Sample Output The foll owing exam ple se ...

  • Avaya 106760804 - page 47

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-7 Appletalk applet alk cable- range Command Mode Interfa ce Configur ation. Description Configure a ca ble range for an Appl etalk Phas e II for an i nterfac e. The no form of this command d isables Appleta lk for th is inter face. Synt ax Sample Output The following e xample conf igures a c able rang e of 2 ...

  • Avaya 106760804 - page 48

    Chapt er 3 3-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 applet alk echo Command Mode Privil eged. Descr iption Send an Appletalk echo reque st to a sp ecified Appletalk node. Syntax appleta lk ech o <n etw ork .nod e> Syst ems P550R, P580, P880, an d P882. T able 3-6. Parameters, Keywords, Argument ...

  • Avaya 106760804 - page 49

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-9 Appletalk applet alk mac-forma t Command Mode Interfa ce Configur ation. Description Se ts w hich A pp leta lk Int erfa ce MA C f orma t is to be use d. T he d efaul t val ue is sn ap. T he n o form of th is co m man d re s ets t he MAC form at fo r the inte rfac e to th e de fa ult valu e . Synt ax Sample ...

  • Avaya 106760804 - page 50

    Chapt er 3 3-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 applet alk routing Command Mode Global Conf igurati on. Descr iption Enabl es Appletalk r outing. The no form of t his command di sables Appletal k routing . The defaul t for Appl etalk ro uting is d isabled. Syntax Sample Output The foll owing exa ...

  • Avaya 106760804 - page 51

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-1 1 Appletalk applet alk st atic cable- ran ge Command Mode Global Confi gur at io n. Description Creates an Appl etalk st atic rou te. The no f orm of this command removes the stat ic route itself , or onl y removes a z one from the stat ic route if the zone name is supplied. Synt ax To E n a b l e : applet ...

  • Avaya 106760804 - page 52

    Chapt er 3 3-12 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 Sample Output The foll owing exam ple creat es a stati c route t o a remote rout er whose address is 1.5 on th e remote ne twork 1 10-120 in the remote zone “adams”. (configure)# applet alk stati c cable-range 1 10-120 to 1.5 zone adams Syst ems ...

  • Avaya 106760804 - page 53

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-13 Appletalk applet alk vlan Command Mode Interfa ce Configur ation. Description Assigns the Appl etalk inte rface to a VLAN. The no for m of this c ommand rese ts th e VL AN to the disc a rd V L AN, whic h is the de fau lt va lu e. Synt ax Sample Output The following e xample set s Appletal k interfac e foo ...

  • Avaya 106760804 - page 54

    Chapt er 3 3-14 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 applet alk zone Command Mode Interf ace Config uration. Descr iption Adds an App letalk zo ne name to an in terface . The no form o f this command removes a specific ally named zone name fr om an inter face, or all zone names, if no zone n ame is sp ...

  • Avaya 106760804 - page 55

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-15 Appletalk clear appl et alk arp Command Mode Global Configur atio n. Description Deletes a si ngle or al l entri es from the Appletalk ARP and Applet alk Routing ta bles, and c lears th e Appletal k counters . Synt ax clear appletalk a rp [ <netwo rk. node > ] Systems P550R, P580, P880, and P882. T ...

  • Avaya 106760804 - page 56

    Chapt er 3 3-16 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 clear a pplet alk route Command Mode Global Conf igurati on Descr iption Delet e a singl e or all Appletalk routing en tries f rom the Apple talk Routi ng Ta b l e . Syntax clear a ppletalk route [ <network> ] Sample Output The foll owing exa ...

  • Avaya 106760804 - page 57

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-17 Appletalk clear appl et alk traffic Command Mode Global Confi gur at io n. Description Clears the Appl etalk co unters. Synt ax clear appletal k traf fic Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 58

    Chapt er 3 3-18 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ping a pplet alk Command Mode Privil eged. Descr iption Sends an Appletal k Echo Reques t to a spe cific Appl etalk nod e. Syntax ping appl etalk <netw ork .nod e> Syst ems P550R, P580, P880, an d P882. T able 3-13. Parameters, Keywords, Argum ...

  • Avaya 106760804 - page 59

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-19 Appletalk show app le t alk acce ss-lis t s Command Mode User . Description Displays curr ently def ined Apple talk acce ss list s. Synt ax show appl etalk ac cess-list Sample Output The following e xample d isplays t he Appleta lk access list. > sh ow appletalk access-l ist Apple Talk Access Lists Sys ...

  • Avaya 106760804 - page 60

    Chapt er 3 3-20 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ap p le t alk arp Command Mode User . Descr iption List entries in the Applet alk ARP T able. Syntax show apple talk arp [all] Sample Output The foll owing exa mple displ ays the Appl etalk ar p table. > show apple talk arp AppleTalk AARP Ca ...

  • Avaya 106760804 - page 61

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-21 Appletalk show apple t alk globa ls Command Mode User . Description Displays inf ormation ab out the ro uter’ s Appletalk stat us. Synt ax show appl etalk global s Sample Output The following e xample disp lays inf ormation ab out the r outer ’ s Appletal k status . > sh ow appletalk globals AT Glo ...

  • Avaya 106760804 - page 62

    Chapt er 3 3-22 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show applet alk interfac e Command Mode User . Descr iption Displa ys Ap ple ta lk- rela ted in ter face s etti ngs fo r a sp ecifi c in terf ace , or al l inter face s wh en in t erfa ce- name is o mitte d. Syntax show appl etal k in te rfa ce [b r ...

  • Avaya 106760804 - page 63

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-23 Appletalk show apple t alk nbp Command Mode User . Description Displays all Appletalk Name Bi nding Prot ocol (NBP) e ntries. Synt ax show appl etalk nbp Sample Output The following e xample shows the displ ay for th e sho w Appletalk nbp command. > sh ow appletalk nbp AppleTalk Name Binding Protocol T ...

  • Avaya 106760804 - page 64

    Chapt er 3 3-24 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show applet alk route Command Mode User . Descr iption Displ ays the co ntents of the Applet alk Routi ng T able. Syntax show apple talk route [ <sta rtin g-r ange > ] Sample Output The foll owing exa mple displ ays the co ntents of the Applet ...

  • Avaya 106760804 - page 65

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-25 Appletalk show apple t alk st atic cable- ran ge Command Mode User . Description Displays the static r outes tha t are confi gured for Appletalk . Synt ax show appl etalk st atic cab le-range [ <sta rting-r ange> ] Sample Output The following e xample disp lays all of the Appl etalk st atic ro utes ...

  • Avaya 106760804 - page 66

    Chapt er 3 3-26 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ap p le t alk traf fi c Command Mode User . Descr iption Displ ays Applet alk Protoc ol Counters an d S tatistic s. Syntax show apple talk traf fic Sample Output The foll owing exa mple displ ays the Appl etalk pr otocol co unter and statis tic ...

  • Avaya 106760804 - page 67

    Docu ment N o. 10 -3 00 090 , Issu e 1 3-27 Appletalk show apple t alk zone Command Mode User . Description Displays the content s of the Apple ta lk Zone Inf or mati on T able (ZIT). Synt ax show appl etalk zo ne [ <zon e-name> ] Sample Output The following e xample disp lays the contents of the Zone1 Appletalk Zone Info rmat ion table . > ...

  • Avaya 106760804 - page 68

    Chapt er 3 3-28 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ...

  • Avaya 106760804 - page 69

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 4-1 4 Buffering Ove rview This chapt er descri bes the f ollowing c ommands: ■ set bu ffering fabr ic-p ort (age - tim er) ■ set bu ffering f abr ic-p o rt (h ipri-a llo c) ■ set bu ffering f abr ic-p o rt (h ipri-s erv ice -r atio ) ■ set bu ffering f abr ...

  • Avaya 106760804 - page 70

    Chapt er 4 4-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set b ufferi ng fabr ic-po rt (age -timer) Command Mode Global Conf igurati on. Descr iption Sets the inpu t or output bu ffe r age ti mer range for a f abric po rt. The d efault age-ti mer rang e is 160-3 20. Syntax set buf f ering fab ri c- por t ...

  • Avaya 106760804 - page 71

    Docu ment N o. 10 -3 00 090 , Issu e 1 4-3 Buffering set buffe ring fabric-port (hipri- alloc) Command Mode Global Confi gur at io n. Description Set the input or output buffer high prio rity al location percenta ge. The default p ercentag e value is 20%. * Note: The switch must be r ebooted f or changes to this p arameter to take ef fect. Synt ax ...

  • Avaya 106760804 - page 72

    Chapt er 4 4-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set b ufferi ng fabr ic-po rt (hip ri-se rvice-r atio) Command Mode Global Conf igurati on. Descr iption Sets the input or output buff er high pr iority service r atio for a fabri c port. The d efa ul t rat io is 999- to-1 . Syntax set buf fering fa ...

  • Avaya 106760804 - page 73

    Docu ment N o. 10 -3 00 090 , Issu e 1 4-5 Buffering set buffe ring fabric-port (pri- threshold) Command Mode Global Confi gur at io n. Description Sets the inpu t or output buf fer priori ty thres hold for a fabric p ort. The defa ult value for t he p ri ori ty th re sho ld i s 4 . Synt ax set buf fering fabr ic-port <fabri c-port- spec> [ro ...

  • Avaya 106760804 - page 74

    Chapt er 4 4-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set buf fe rin g p or t (ag e- ti mer ) Command Mode Global Conf igurati on. Descr iption Sets the output buf fer ag e timer for a physic al port. Th e default settin g is 168. Syntax set buf f eri ng port <mod -p ort- spec > output age-t imer ...

  • Avaya 106760804 - page 75

    Docu ment N o. 10 -3 00 090 , Issu e 1 4-7 Buffering set buffe ring port (hipri-alloc) Command Mode Global Confi gur at io n. Description Sets the out put buf fer hi gh priorit y allocat ion perc entage fo r a physi cal port . The defaul t setti ng is 20. Synt ax set b uffering po rt <mod-port- spec> outp ut hipr i-al loc {10 | 20 | 30 | 40 | ...

  • Avaya 106760804 - page 76

    Chapt er 4 4-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set b uffering port (hipri -servic e-ratio) Command Mode Global Conf igurati on. Descr iption Set the out put bu ffer hi gh pri orit y se rvi ce rati o fo r a ph y sic al po r t. T he default settin g is 102 3-to-1. Syntax set buf fe ring por t < ...

  • Avaya 106760804 - page 77

    Docu ment N o. 10 -3 00 090 , Issu e 1 4-9 Buffering set buffe ring port (pri- threshold) Command Mode Global Confi gur at io n. Description Se ts th e out put buffer priori ty th res hold for a phys ica l por t. The defa ult setting is 4. Synt ax set buf fering port <mod- port-spe c> outpu t pr i -t hre sho ld {1 | 2 | 3 | 4 | 5 | 6 | 7 | al ...

  • Avaya 106760804 - page 78

    Chapt er 4 4-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show buff ering fabric-po rt Command Mode User . Descr iption Displ ays the buf fering co nfigurat ion and st atisti cs for a f abric por t. Syntax show buf fering fabric -port [ <fabr ic-port -spec> [..., <fa bric- port-spec > ] ] Sampl ...

  • Avaya 106760804 - page 79

    Docu ment N o. 10 -3 00 090 , Issu e 1 4-1 1 Buffering show buffe ring port Command Mode User . Description Displays the buff er config uration a nd stati stics f or a physic al port. Synt ax show buf fering port [ <mod-por t-spec> […, <mod-port-s pec> ]] Sample Output The following e xample disp lays the buff er config uration a nd s ...

  • Avaya 106760804 - page 80

    Chapt er 4 4-12 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ...

  • Avaya 106760804 - page 81

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 5-1 5 Console Ove rview This chapt er descri bes: ■ set con sole baud ■ set con sole data bits ■ set con sole flowc ontrol ■ set co nso le in it cm d ■ set con sole pa rity ■ set con sole stop bits ■ set con sole tra nsfer ppp ■ set con sole type ? ...

  • Avaya 106760804 - page 82

    Chapt er 5 5-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set c onsole baud Command Mode Global Conf igurati on. Descr iption Sets console por t baud ra te. The def ault valu e is 9600. Syntax set cons ole baud {30 0| 1200 | 2400 | 48 00 | 9600 | 1920 0 | 3840 0 | 57600 | 1 15200} Sample Output The foll ow ...

  • Avaya 106760804 - page 83

    Docu ment N o. 10 -3 00 090 , Issu e 1 5-3 Consol e set consol e dat abit s Command Mode Global Confi gur at io n. Description Sets the cons ole seri al port’ s databit width. The d efaul t value i s 8. * Note: This comm an d is no t ap p lica ble when the cons ole s eri al po rt is configur ed in PPP mode. T he input will not be acc epted or sto ...

  • Avaya 106760804 - page 84

    Chapt er 5 5-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set c onsole flowc ontrol Command Mode Global Conf igurati on. Descr iption Sets the flow co ntrol ty pe for the serial console po rt. The def ault for both TTY and PPP is xon/xof f. Syntax set cons ole flowco ntrol {non e | xon/xof f} Sample Output ...

  • Avaya 106760804 - page 85

    Docu ment N o. 10 -3 00 090 , Issu e 1 5-5 Consol e set consol e initc md Command Mode Global Confi gur at io n. Description Sets the mod em initia lizatio n string for consol e serial port mo dem control software. The defa ult Modem Confi guratio n Str ing is AT & D 0 S 0 = 1 . * Note: This comm an d is no t ap p lica ble when the cons ole s e ...

  • Avaya 106760804 - page 86

    Chapt er 5 5-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set c onsole p arity Command Mode Global Conf igurati on. Descr iption * Note: Sets th e pari ty for t he console serial p ort. The def ault set ting is none. * Note : The conc ept of p arity is n ot app licab le to t he con sole ser ial port when i ...

  • Avaya 106760804 - page 87

    Docu ment N o. 10 -3 00 090 , Issu e 1 5-7 Consol e set con sol e stopb it s Command Mode Global Confi gur at io n. Description Sets the serial console port stopbits to 1 or 2 bits wide. The def ault sett ing is 1. Stopb its is no t compat ible wit h the se rial con sole port configur ed in PPP mode. The s topbits para meter cann ot be acce pted or ...

  • Avaya 106760804 - page 88

    Chapt er 5 5-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set cons ole transf er ppp Command Mode Global Conf igurati on. Descr iption T ransfers control o f the ser ial cons ole port a nd the CLI se ssion to the PPP protocol layer . This command i s accept ed only when t he consol e serial port is configu ...

  • Avaya 106760804 - page 89

    Docu ment N o. 10 -3 00 090 , Issu e 1 5-9 Consol e set consol e type Command Mode Global Confi gur at io n. Description Sets the c onsole type to t he i ndicat ed va lue - eit her t ty o r ppp. The defa ult i s tty . Synt ax set co nsole type {tty | pp p} Sample Output The following e xample set s the cons ole type t o tty . (configure)# set con s ...

  • Avaya 106760804 - page 90

    Chapt er 5 5-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show conso le Command Mode User . Descr iption Displ ays the se rial con sole port configur ation. Syntax show consol e Sample Output The foll owing exa mple displ ays the se rial por t config uration i nformatio n. > show consol e Type: TTY Baud ...

  • Avaya 106760804 - page 91

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 6-1 6 DNS Ove rview This chapt er descri bes the f ollowing c ommands: ■ ip domain -looku p ■ ip nam e- serv e r ■ ip d omain-l ist ■ ip do main-name ■ show host ...

  • Avaya 106760804 - page 92

    Chapt er 6 6-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip domain-lookup Command Mode Global Conf igurati on. Descr iption Enable s DN S cl ie nt. T he no fo rm of this com mand dis abl es DNS clie nt. Syntax Sample Output The f ollo wing ex ampl e en able s DN S . (configure)# ip domai n-lookup Syst ems ...

  • Avaya 106760804 - page 93

    Docu ment N o. 10 -3 00 090 , Issu e 1 6-3 DNS ip name-s erver Command Mode Global Configur atio n. Description Ad ds a DNS ser ver ad dre ss. T he no form of t his comman d removes the DNS server ad dress. Synt ax Sample Output The following e xample adds the DNS serve r with an I P address of 210.120.87.90. (configure)# ip name -server 2 10.120.8 ...

  • Avaya 106760804 - page 94

    Chapt er 6 6-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip domain-li st Command Mode Global Conf igurati on. Descr iption Adds a domain name to the domain name list . The no form of this co mmand removes t he domain name. Syntax Sample Output The foll owing exam ple adds t he name “avay a.com” to the ...

  • Avaya 106760804 - page 95

    Docu ment N o. 10 -3 00 090 , Issu e 1 6-5 DNS ip domain-name Command Mode Global Configur atio n. Description Adds a domain name to t he domain name lis t. The no form of this command removes the domain name. Synt ax Sample Output The following e xample adds the name “av aya.com” to the DNS name list. (configure)# ip do main-name avaya.c om Sy ...

  • Avaya 106760804 - page 96

    Chapt er 6 6-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show host Command Mode Global Conf igurati on. Descr iption Displ ays the DNS doma in config uration. Syntax show host Sample Output The foll owing exa mple displ ays the DNS co nfigurat ion: (configure)# show host Syst ems P550R, P580, P880, an d P ...

  • Avaya 106760804 - page 97

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 7-1 7 DVMRP Ove rview This chapt er descri bes the f ollowing c ommands: ■ ip dvm rp ■ ip dvm r p in terf a ce ty pe ■ ip dvm r p in terf a ce-m etri c ■ ip dvmrp mi n-route- flash-u pdate ■ ip dvmrp n eighbor -probe-int erval ■ ip dvmrp n eighbor -tim ...

  • Avaya 106760804 - page 98

    Chapt er 7 7-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip dvmrp Command Mode Interf ace Config uration. Descr iption Enabl es and conf igure DVMRP se rvices o n an int erface. T he no form of this co mmand disab les DVMRP servi ces on an i nterface . Syntax Sample Output The f ollo wi ng ex ampl e en ab ...

  • Avaya 106760804 - page 99

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-3 DVMRP ip dvmrp interface-metric Command Mode Interfa ce Configur ation. Description Configures th e DVMRP inter face metr ic. The no f orm of this command restore s the defa ult, which is 1. Synt ax Sample Output The following e xample conf igures t he interf ace labe led “bosto n” with a DVMR P int er ...

  • Avaya 106760804 - page 100

    Chapt er 7 7-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip dvmrp inter face type Command Mode Interf ace Config uration. Descr iption Confi gures the DVMRP interf ace type. The no form of this command resto res the i nterf ace to th e d efa ult interf ace typ e, wh ic h is bro ad cas t. Syntax Sample Out ...

  • Avaya 106760804 - page 101

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-5 DVMRP ip dvmrp min-rout e-flash -up date Command Mode DVMRP Router Config uration. Description Sets the DVMRP minimum route flash upd ate peri od. Use the no form of this com m and to re tur n t o th e defa ult v alu e of 5. Synt ax Sample Output The following e xample conf igures the i p dvmrp min imum ro ...

  • Avaya 106760804 - page 102

    Chapt er 7 7-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip dvmrp neighbor-p robe-interv al Command Mode DVMRP Router Co nfiguratio n. Descr iption Sets the DVMRP neigh bor probe interva l. Use the no form of this c ommand to retu rn to the default v alue of 10 seconds. Syntax Sample Output The foll owing ...

  • Avaya 106760804 - page 103

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-7 DVMRP ip dvmrp ne ighbor-timeo ut Command Mode DVMRP Router Config uration. Description Sets the DVMRP neighb or timeout interva l. Use the n o form of th is command to ret urn to th e default value of 35 seconds. Synt ax Sample Output The following e xample conf igures the I P DVMRP neighbor t imeout inte ...

  • Avaya 106760804 - page 104

    Chapt er 7 7-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip dvmrp prune-me ssage-l ifetime Command Mode DVMRP Router Co nfiguratio n. Descr iption Sets th e D VMR P p rune me ssag e li feti me. Use the no f orm of this com ma nd to ret urn to the defa ult va lue of 7 20 0 s ec ond s. Syntax Sample Output ...

  • Avaya 106760804 - page 105

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-9 DVMRP ip dvmrp re mote-tunne l-addres s Command Mode Interfa ce Configur ation. Description Configures th e DVMRP remote-tu nnel-addr ess on an i nterface. Th e no form of this command res tores th e default , which is: no defined ad dress. Synt ax Sample Output The following e xample conf igures t he DVMR ...

  • Avaya 106760804 - page 106

    Chapt er 7 7-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip dvmrp route- limit Command Mode DVMRP Router Co nfiguratio n. Descr iption Sets the maxim um routes al lowed in DVMRP . Use the no f orm of thi s command t o return t o the def ault val ue of 7000 r outes. Syntax Sample Output The foll owing exam ...

  • Avaya 106760804 - page 107

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-1 1 DVMRP ip dvmrp st at s-re set Command Mode DVMRP Router Config uration. Description Resets the DVMRP glob al stat istics. Synt ax ip dvmrp stats -reset Sample Output The following e xample shows the command fo r IP DVMRP stats -reset. (configure router:dvmrp)# i p dvmrp stats -re set Systems P550R, P580, ...

  • Avaya 106760804 - page 108

    Chapt er 7 7-12 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip dvmrp timers basic Command Mode DVMRP Router Co nfiguratio n. Descr iption Adjus t s the D V MRP net w ork ti mer s . Us e the no fo r m o f th is c omm a nd t o retur n to the de fau lt va lu es. Syntax Sample Output The foll owing exam ple conf ...

  • Avaya 106760804 - page 109

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-13 DVMRP ip multic ast prune-sour ce Command Mode Interfa ce Configur ation. Description Configures th e host addr ess used i n DVMRP prune pack ets forwar ded on this inte rfa ce . The no fo rm of t his comm and rest ore s t he d efaul t, wh ich is host-addr . Synt ax Sample Output The following e xample co ...

  • Avaya 106760804 - page 110

    Chapt er 7 7-14 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip multicas t ttl-t hres hold Command Mode Interf ace Config uration. Descr iption Sets the minimum TTL ( time-to- live) re quired fo r a packet to leave the inter face . Th e no form of th is com m an d res tore s th e d efa ult ( n one ). Syntax S ...

  • Avaya 106760804 - page 111

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-15 DVMRP router dvmrp Command Mode Global Confi gur at io n. Description Enables DVMRP routin g globall y on an interf ace. The no f orm of the command disabl es DVMRP routin g. The defaul t state is Enabled. Synt ax Sample Output The following e xample enabl es DVMRP routin g. (configure)# r outer dvmrp Sys ...

  • Avaya 106760804 - page 112

    Chapt er 7 7-16 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ip dvmr p Command Mode User . Descr iption Displ ays configur ation inf ormation a bout the DVMRP proto col. Syntax show ip dvmrp Sample Output The foll owing exam ple displ ays the DVMRP glo bal confi guration inform ation wit h some st atisti ...

  • Avaya 106760804 - page 113

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-17 DVMRP show ip dvmrp designat ed forwarders Command Mode User . Description Displays all DVMRP designat ed forward ing routers for the source net work address a nd addre ss mask. Synt ax show ip d vmrp designa ted forwar ders <ip- addr> <mask> Sample Output The follo wing example display s the ...

  • Avaya 106760804 - page 114

    Chapt er 7 7-18 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ip dvmr p down stream de pendent r outers Command Mode User . Descr iption Displ ays all DVMRP downs tream depe ndent neig hbor route rs for t he source n etwork addr ess and add ress mask. Syntax show ip dvmr p downstream d ependent rout ers & ...

  • Avaya 106760804 - page 115

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-19 DVMRP show ip dvmrp f orwarding ca che Command Mode User . Description Displays the DVMRP Multi cast Forwar ding Cache. Synt ax show ip d vmrp forward ing cache Sample Output The following e xample disp lays the DVMRP Multicast Fo rwarding c ache. > show ip dv mrp forward ing cache DVMRP forwarding cac ...

  • Avaya 106760804 - page 116

    Chapt er 7 7-20 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ip dvmr p interface Command Mode User . Descr iption Displ ays the r elate d informat ion abo ut the DVMRP i nterfac e. Syntax show ip dvmr p interf ace Sample Output The foll owing exa mple displ ays infor mation for an ip DVMRP interf ace > ...

  • Avaya 106760804 - page 117

    Docu ment N o. 10 -3 00 090 , Issu e 1 7-21 DVMRP show ip dvmrp interf ace neighbors Command Mode User . Description Displays all DVMRP neighbors o n all DVMRP confi gured int erfaces . Synt ax show ip d vmrp interfac e neighbor s Sample Output The following e xample disp lays all DVMRP neighbors o n all of t he configure DVMRP interfac es on the s ...

  • Avaya 106760804 - page 118

    Chapt er 7 7-22 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ip dvmr p routes Command Mode User . Descr iption Displ ays all DVMRP ro utes. Syntax show ip dvmr p routes Sample Output The foll owing exam ple displ ays all DVMRP ro utes. > show ip dvmrp r outes DVMRP route table Source network and mask: ...

  • Avaya 106760804 - page 119

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 8-1 8 Hunt Group s Ove rview This chapt er descri bes: ■ set hunt group ■ set hunt group aut o-flush ■ set hunt group (r edistri bute) ■ set hunt group int ernal-e rror -shutdo wn ■ show huntg roup ■ show huntg roup detai led ■ show huntg roup in ter ...

  • Avaya 106760804 - page 120

    Chapt er 8 8-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set h untgroup Command Mode Global Conf igurati on. Descr iption Creat es a huntg roup, modifi es an exis ting hunt group or r emoves a huntg roup. If no load- shari ng valu e is spe cifi ed, then a huntgro up is cr eated with load- shari ng enable ...

  • Avaya 106760804 - page 121

    Docu ment N o. 10 -3 00 090 , Issu e 1 8-3 Hunt Groups set huntgro up auto-flush Command Mode Global Configur atio n. Description Enables or disa bles the auto f lush feature for the ports partic ipating in a hun t group. Wh en you e nab le a ut o flu s h fo r a hun t gr oup , all AF T e nt rie s tha t w ere learned o n the hu nt group ar e marked ...

  • Avaya 106760804 - page 122

    Chapt er 8 8-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set h untgroup ( redis tribute) Command Mode Global Conf igurati on. Descr iption Redis tribute s learned addresses to a huntg roup. The MAC a ddresses are redist ributed a mong the hunt group po rts. Syntax set huntgro up <hunt gr oup-name> r ...

  • Avaya 106760804 - page 123

    Docu ment N o. 10 -3 00 090 , Issu e 1 8-5 Hunt Groups set huntgro up internal- error-shut down Command Mode Global Configur atio n. Description Enables or dis ables in ternal- error -shutd own on the hun tgroup. Synt ax Sample Output The following e xample enabl es inte rnal-er ror -shutdown on a huntgrou p. (configure)# set huntgr oup interna l-e ...

  • Avaya 106760804 - page 124

    Chapt er 8 8-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show huntg roup Command Mode User . Descr iption Displ ays a sing le huntgroup o r , if no huntgroup n ame is spec ified, then a ll of the c onfigured huntgroups display . Syntax show huntgr oup [ <huntgr oup-name> ] Sample Output The foll owi ...

  • Avaya 106760804 - page 125

    Docu ment N o. 10 -3 00 090 , Issu e 1 8-7 Hunt Groups show huntgro up det ailed Command Mode User . Description Displays deta iled inf ormation a bout all of the hunt groups con figured on your switc h. Synt ax show hunt group deta iled Sample Output The following e xample shows detailed huntgroup information. > show huntgr oup detailed Base- L ...

  • Avaya 106760804 - page 126

    Chapt er 8 8-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show huntg roup interna l-error- config Command Mode User . Descr iption Displ ays the st atus of i nternal -error -detection on the hunt gr oup. Syntax show huntgr oup inter nal-err or- config Sample Output The fo llowing exa mple displ ays the st ...

  • Avaya 106760804 - page 127

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 9-1 9 IGMP Ove rview This chapt er descri bes the f ollowing c ommands: ■ ip igmp ■ ip igmp max-gr oups ■ ip igm p pro c ess- lea ves ■ ip igm p quer ier ■ ip igm p que r ier-tim eout ■ ip igm p que r y-in ter val ■ ip igm p que ry- max- res pons e-t ...

  • Avaya 106760804 - page 128

    Chapt er 9 9-2 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip igmp Command Mode Interf ace Config uration. Descr iption Enable s the Inte rne t G rou p Man agem ent P roto c ol (I GMP ) on a n in te rfac e. The no for m of this c ommand disable s IGMP on an interface . Syntax Syntax The foll owing exam ple ...

  • Avaya 106760804 - page 129

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-3 IGMP ip igmp max-group s Command Mode Interfa ce Configur ation. Description Sets the maximum nu mber of IGMP gr oups on an i nterf ace. The no form of this command r estores th e defau lt value, whic h is 32 gr oups. Synt ax Sample Output The following e xample sets t he maximum number of IGMP gro ups on ...

  • Avaya 106760804 - page 130

    Chapt er 9 9-4 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip igmp proc ess-lea ves Command Mode Interf ace Config uration. Descr iption Enabl es the proces sing of leave req uests on an interf ace. The no form of this command di sables t he proces sing of le ave reques ts on an i nterface and retur ns it t ...

  • Avaya 106760804 - page 131

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-5 IGMP ip igmp querier Command Mode Interfa ce Configur ation. Description Enables IGMP qu erier on an interfac e on a r outer . Synt ax Sample Output The foll owin g exa mple ena b les I GMP q uerie r on in terf ace la bel ed “boston”. (config-if:boston)# ip i gmp querier 1 Systems P550R, P580, P880, an ...

  • Avaya 106760804 - page 132

    Chapt er 9 9-6 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip igmp querier-timeout Command Mode Interf ace Config uration. Descr iption Sets the tim e that needs to elapse from th e time the last query wa s heard before this rout er take s over as a desi gnated que rier fo r the in terface . The no form of ...

  • Avaya 106760804 - page 133

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-7 IGMP ip igmp query-interval Command Mode Interfa ce Configur ation. Description Configures th e frequenc y at which the router s ends IGMP host- query messages. The no form o f this comma nd restores the defaul t value o f 125 seconds. Synt ax Sample Output The following e xample conf igures t he frequen c ...

  • Avaya 106760804 - page 134

    Chapt er 9 9-8 Com mand Refe rence Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip igmp query-max- response-time Command Mode Interf ace Config uration. Descr iption Confi gures the maximum respons e time advert ised in I GMP queries. The no form of this command r estores the defa ult value of 10 secon ds. Syntax Sample Output ...

  • Avaya 106760804 - page 135

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-9 IGMP ip igmp query-timeout Command Mode Interfa ce Configur ation. Description Se ts th e ti m e th at nee ds to ela p se fr om th e tim e the las t que r y wa s hea rd befo re th is ro uter take s ov er as a desi gna ted queri er fo r the inter face . T he no form of this command res tores th e default va ...

  • Avaya 106760804 - page 136

    Chapt er 9 9-10 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip igmp robustness Command Mode Interf ace Config uration. Descr iption Confi gures the IGMP robust ness variable. Use the no form of thi s command to rest ore the de fault va lue of 2. Syntax Sample Output The foll owing exa mple confi gures the IG ...

  • Avaya 106760804 - page 137

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-1 1 IGMP ip igmp version Command Mode Interfa ce Configur ation. Description Configures whic h IGMP versi on the ro uter wil l use. Us e the no f orm of thi s command to res tore the default value of 2. Synt ax Sample Output The following e xample conf igures t he router on an inte rface la beled “boston? ...

  • Avaya 106760804 - page 138

    Chapt er 9 9-12 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip mtrace Command Mode User . Descr iption Global ly configur es MT race ca pability on this rout er . The no form of thi s command di sables MT race cap ability . Syntax Sample Output The foll owing exam ple confi gures IP mt race capab ility on th ...

  • Avaya 106760804 - page 139

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-13 IGMP mtrace Command Mode Priv ile ged. Description Tra ces th e path fr om a source t o a desti nation br anch fo r a multic ast dist ribu tio n tree . The tr ace foll ow s the mu ltic ast path from the des tina tio n to the sourc e by passin g an mtr ace reques t packet to each hop. The respons es are un ...

  • Avaya 106760804 - page 140

    Chapt er 9 9-14 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 router ig mp Command Mode Global Conf igurati on. Descr iption Globa lly en ab les or di sab les IGMP . The no form of the command disab les a IGMP . The defa ult s tate is: Enabled . Syntax Sample Output The foll owing exam ple global ly disab les ...

  • Avaya 106760804 - page 141

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-15 IGMP show ip igmp group s Command Mode User . Description Displays multi cast gro ups, learn ed but thi s router via IGMP . Synt ax show ip igmp gr oups Sample Output The following e xample disp lays multi cast gro ups learn ed by this router vi a IGMP . > show ip i gmp grou ps GROUP<s> for Accou ...

  • Avaya 106760804 - page 142

    Chapt er 9 9-16 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ip igmp in terfac e Command Mode User . Descr iption Displ ays IGMP inte rface con figurat ion. Syntax show ip i gm p in terf ace Sample Output The foll owing exa mple displ ays IP IGM P interfa ce infor mation on th e switc h. > show ip ig ...

  • Avaya 106760804 - page 143

    Docu ment N o. 10 -3 00 090 , Issu e 1 9-17 IGMP show ip igmp st atistics Command Mode User . Description Di spl ays IG MP stat isti cs for all in ter fa ces . Synt ax show ip ig m p st at isti cs Sample Output The foll owin g ex amp le di spl ay s IG M P st atis tics for all of th e in te rfa ces configure d on the swi tch. > show ip igm p sta ...

  • Avaya 106760804 - page 144

    Chapt er 9 9-18 Command Reference G uide for t he Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ...

  • Avaya 106760804 - page 145

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 10-1 10 Intelligent Multicast Ove rview This chapt er descri bes the f ollowing c ommands: ■ clear c gm p stat isti cs ■ clear igmp-snoopi ng statist ics ■ clear intel ligent- multic ast cli ent-po rt ■ clear intelli gent- multicas t rout er- port ■ clea ...

  • Avaya 106760804 - page 146

    Chapt er 10 10-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ set lgm p server ■ set lg mp se rve r pr iori ty ■ set lgm p server proxy ■ set lgm p server router -report-t ime ■ set lgm p server robust -variabl e ■ show cgm p st at isti cs ■ show igmp- snooping s tatistic s ■ show in tellige ...

  • Avaya 106760804 - page 147

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-3 Intellige nt Mult icast clear cgmp st atisti cs Command Mode Global Configur atio n. Description Clears CGMP snoo ping stat istics. Synt ax clear cgmp stati stics Sample Output The following e xample cle ars cgmp snooping st atisti cs. (configure)# clear cgm p sta tist ics Systems P550R, P580, P880, and P ...

  • Avaya 106760804 - page 148

    Chapt er 10 10-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear igmp-snoo ping st atistics Command Mode Global Conf igurati on. Descr iption Clear s IGMP snoo ping stat istics. Syntax clear i gmp-snoopin g statis tics Sample Output The foll owing exa mple clear s igmp snoop ing stat istics. (configure)# cl ...

  • Avaya 106760804 - page 149

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-5 Intellige nt Mult icast clear int ellig ent-mult icast clie nt-po r t Command Mode Global Configur atio n. Description Removes the s pecified learned c lient po rts from a n Inte lligent Multica st session. Synt ax clear intell igent- multicas t client -port <sess ion-id> port <port> Sample Ou ...

  • Avaya 106760804 - page 150

    Chapt er 10 10-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear inte lligent-multic ast rout er-port Command Mode Global Conf igurati on. Descr iption Removes ma nually or dynamicall y added rou ter port s. * Note : Y ou can remove only one rout er port at a ti me. If a router p ort is configu red with vla ...

  • Avaya 106760804 - page 151

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-7 Intellige nt Mult icast clear int ellig ent-mult ic ast sessi on Command Mode Global Configur atio n. Description Removes the s pecified learned s ession f rom Inte lligent Multic ast. * Note: Y ou cannot use this c ommand to remove static mu lticast sessions . This command r emoves dynami cally le arned ...

  • Avaya 106760804 - page 152

    Chapt er 10 10-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear inte lligent-mult icast st ati c-client -port Command Mode Global Conf igurati on. Descr iption Remo ve s th e sp ec ifie d m a nua lly a dded clie nt p o rt fr om an Int elli gen t Multi cast sess ion. Syntax clear inte llig e nt-m ulti cas t ...

  • Avaya 106760804 - page 153

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-9 Intellige nt Mult icast clear int ellig ent-mult ic ast st atic-session Command Mode Global Configur atio n. Description Removes manuall y cre ated Inte lligent Mult icast se ssion s. Synt ax clear intell igent-m ulticas t stati c-sessi on { <g r oup-addr ess> | m ac- add re ss <mac-addr ess> ...

  • Avaya 106760804 - page 154

    Chapt er 10 10-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 clear lgmp c lient st atist ics Command Mode Global Conf igurati on. Descr iption Clear s LGMP client st atisti cs. If you o mit the par ameters, thi s command will cl ear the gl obal counter s repres enting al l LGMP clients. Syntax clear l gmp ...

  • Avaya 106760804 - page 155

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-1 1 Intellige nt Mult icast clear lgmp server st atistics Command Mode Global Configur atio n. Description Clears the LGM P server globa l or per VLAN statist ics. Exclu ding para mete rs c lears t he g loba l coun ters that r epr esent all L GMP s erv er s. Synt ax clear lgmp serve r stati stics [v lan {al ...

  • Avaya 106760804 - page 156

    Chapt er 10 10-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set cgmp Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles CGMP snooping f unctiona lity . CGMP snooping is disable d by defaul t. Syntax Sample Output The f ollo wing ex ampl e en able s cgm p . (configure)# set c gmp enab ...

  • Avaya 106760804 - page 157

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-13 Intellige nt Mult icast set igmp-snoop ing Command Mode Global Configur atio n. Description Enables or di sa ble s I GMP sno opi ng. The d efa ult s ta te of IGMP s noopi ng is disabled. Synt ax Sample Output The following e xample enabl es IGMP snoopi ng. (configure)# set i gm p-sn oop ing en able Syste ...

  • Avaya 106760804 - page 158

    Chapt er 10 10-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set intellige nt-multicast Command Mode Global Conf igurati on. Descr iption Enable s or d isab l es In tell ig en t Mu ltic ast in g. T he d ef aul t stat e is en a ble d. Syntax Sample Output The f ollow ing e xamp le e nable s In te llig ent ...

  • Avaya 106760804 - page 159

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-15 Intellige nt Mult icast set inte lligen t-mult icast cl i ent-lea ve-pr ocessing Command Mode Global Configur atio n. Description Configures pr ocessing o f client por t leave me ssages. The default s tate of this command i s disabled. Synt ax Sample Output The foll owin g ex a mp le ena bles t he p roce ...

  • Avaya 106760804 - page 160

    Chapt er 10 10-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set int elligent-multicast clie nt-port- pruning Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles auto matic c lient port pruning. The default state of this command i s disable d. Syntax Sample Output The foll owing exa mp ...

  • Avaya 106760804 - page 161

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-17 Intellige nt Mult icast set intelligen t-multicas t client-port -pr uning time Command Mode Global Configur atio n. Description Se ts th e ti m e in te rva l aft er whi ch a cl ien t port will be r em ove d fro m a session i f no IGMP report s have been heard. The valid ra nge is f rom 1 minut e to 1440 ...

  • Avaya 106760804 - page 162

    Chapt er 10 10-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set int elligent-multicast router- port Command Mode Global Conf igurati on. Descr iption Confi gures rout er ports on a selecte d VLAN or all VLANs. The defaul t state i s disabl ed. Syntax set int elligen t-mult icast r outer -port v lan {all ...

  • Avaya 106760804 - page 163

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-19 Intellige nt Mult icast set inte lligen t-mult i cast rou te r-port- pruning Command Mode Global Configur atio n. Description Enables or dis ables automat ic route r port pr uning. The de fault st ate is enabled. Synt ax Sample Output The following e xample disa bles rout er port pruning. (configure)# se ...

  • Avaya 106760804 - page 164

    Chapt er 10 10-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set inte lligent- multicas t router- por t- prun ing time Command Mode Global Conf igurati on. Descr iption Sets the tim e interv al after which quie t router ports will b e remove d. Syntax set int elligen t-mult icast r outer -port- pruning t ...

  • Avaya 106760804 - page 165

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-21 Intellige nt Mult icast set inte lligen t-mult icast se ssion-pr uning Command Mode Global Configur atio n. Description Enables or dis ables se ssion p runing for Intell igent Mu ltic asting. I ntellig ent multic ast sess ion pru ning will remove an y multicas t sess ion from configura tion tha t has bee ...

  • Avaya 106760804 - page 166

    Chapt er 10 10-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set intellige nt-multicast session-prun ing time Command Mode Global Conf igurati on. Descr iption Sets the tim e interv al after which inac tive lea rned s essions a re removed. Syntax set intel li gen t-mult ic ast sess ion -pr uni ng tim e &l ...

  • Avaya 106760804 - page 167

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-23 Intellige nt Mult icast set inte lligen t-mult icast st atic-cl ient-p ort Command Mode Global Configur atio n. Description Ad ds a c lien t port to a stat ic Inte llige nt Mu ltic a st se ssion . Synt ax set int elli gen t- mu lt icas t st atic -c lien t-p o rt { <gr oup-addr ess> | mac-addr ess & ...

  • Avaya 106760804 - page 168

    Chapt er 10 10-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set i ntell igent-mul ticast st atic- session Command Mode Global Conf igurati on. Descr iption Create s a n Inte llig ent Mu ltic a st se s sion. Syntax set int elligen t-mult icast static -sessio n { <gr oup-addr ess> | mac- address < ...

  • Avaya 106760804 - page 169

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-25 Intellige nt Mult icast set lgmp cl ient Command Mode Global Configur atio n. Description Enables or dis ables th e LGMP client functiona lity . The defaul t state is disabled. Synt ax Sample Output The following e xample enabl es lg mp client. (configure)# set lg mp client enable Systems P550R, P580, P8 ...

  • Avaya 106760804 - page 170

    Chapt er 10 10-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set lgmp server Command Mode Global Conf igurati on. Descr iption Enable s or dis ab les the LGM P serv er . T he L G MP serv er i s dis a bled by default . Syntax Sample Output The foll owing exa mple disab les lgmp server (configure)# set l gm ...

  • Avaya 106760804 - page 171

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-27 Intellige nt Mult icast set lgmp ser ver prio rity Command Mode Global Configur atio n. Description Se ts t he L GM P ser ver ID pr ior ity . E xc ludin g t he p aram ete r sets the pri ori ty to its de fault of 128. Synt ax set lg m p s er ver prio rit y [ <server -priorit y> ] Sample Output The f ...

  • Avaya 106760804 - page 172

    Chapt er 10 10-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set lgmp server proxy Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles the LGMP s erver proxy mode . The proxy mod e allows an LGMP ser ver to gener ate LGMP Router Report and LGMP Rou ter Leave messag es on behalf of anot ...

  • Avaya 106760804 - page 173

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-29 Intellige nt Mult icast set lgmp ser ver route r-repor t- time Command Mode Global Configur atio n. Description Se ts th e LG MP ser ve r ro ute r re po rt tim e. Om i ttin g th e para m ete r s ets the router r eport ti me to it s defaul t time of 1 25 secon ds. Synt ax set l gmp server r outer -report- ...

  • Avaya 106760804 - page 174

    Chapt er 10 10-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set lg mp server ro bust-v ariable Command Mode Global Conf igurati on. Descr iption Sets the LGMP ser ver robus tness var iable. Omitti ng the par ameter set s the robustne ss varia ble to its defa ult valu e of 2. Syntax set lgm p server robus ...

  • Avaya 106760804 - page 175

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-31 Intellige nt Mult icast show cgmp st atistics Command Mode User . Description Di spl ays C GMP - rela ted st atis tics . Synt ax show cgmp sta tist ics [ de tai led ] Sample Output The following e xample d isplays c gmp statis tics: > show cgmp st atisti cs CGMP Snooping is currently disabled. CGMP Pa ...

  • Avaya 106760804 - page 176

    Chapt er 10 10-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show igmp-sno oping st atistics Command Mode User . Descr iption Displ ays IGMP snoopi ng configu ration and st atisti cs. Syntax show igmp-s nooping st atistic s [detaile d] Sample Output The foll owing exa mple show s the igmp- snooping st ati ...

  • Avaya 106760804 - page 177

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-33 Intellige nt Mult icast show inte llig ent -mult icast cl ient-p ort Command Mode User . Description Displays curr ent cli ent ports that are assi gned to a pa rticula r sessio n. Synt ax show inte ll ige nt-m ulti cas t c lien t-p or t <session-id > Sample Output Th e fol low ing e xamp le d isp l ...

  • Avaya 106760804 - page 178

    Chapt er 10 10-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show intelligent-mult icas t confi guration Command Mode User . Descr iption Displ ays global confi guration informati on for Intell igent Mu lticast ing. Synt ax show intell igent-mul ticast c onfig uration Sample Output The fo llowing exa mple ...

  • Avaya 106760804 - page 179

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-35 Intellige nt Mult icast show in te lligent -mult icast rou ter-po rt Command Mode User . Description Di splay s the Inte ll ige nt Mult ic ast ro uter p ort s. Synt ax show intell ige nt-m ulti ca st ro u ter-po rt Sample Output The following e xample disp lays the router por ts that are confi gured for ...

  • Avaya 106760804 - page 180

    Chapt er 10 10-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show intelligent -multic as t se ss ion Command Mode User . Descr iption Displ ays Intel ligent Multicast sessions that opti onally mat ch specifi ed searc h cr iter ia. O mitti ng a ny c r i ter ia di spl ays al l con fig u red Inte ll ige nt M ...

  • Avaya 106760804 - page 181

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-37 Intellige nt Mult icast show in te lligent -mult icast st atic-cl ient Command Mode User . Description Displays all static ally conf igured cl ient ports for a given I ntellige nt Multicast session. * Note: If a st atic se ssi on is cr eate d with vlan all , then you mu st specify vlan all to see t h e c ...

  • Avaya 106760804 - page 182

    Chapt er 10 10-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show intelligent -multic as t st atic-session Command Mode User . Descr iption Displa ys all ma nu all y con figur ed se ssi o ns fo r Inte llig ent Mu ltic ast in g. Syntax show int el lig ent- m ult ic ast stat ic-s e ssio n Sample Output The ...

  • Avaya 106760804 - page 183

    Docu ment N o. 10 -3 00 090 , Issu e 1 10-39 Intellige nt Mult icast show lg mp cl ient Command Mode User . Description Displays curr ent LGMP clie nt config uration i nformati on or stat istics . Omitting pa rameter s after th e stat istics keyword dis plays glo bal LGMP cli e nt st atis tics . Synt ax show lgmp c lient {co nfig | st atisti cs [vl ...

  • Avaya 106760804 - page 184

    Chapt er 10 10-40 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show lgmp server Command Mode User . Descr iption Displa ys c u rren t LGM P se rve r co nf igu rati on i n form atio n or stat isti c s. Omitting parameters after t he stati stics keywor d display s global LGMP serv er st ati st ics Syntax show ...

  • Avaya 106760804 - page 185

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 1 1-1 11 IP Ove rview This chapt er descri bes the f ollowing c ommands: ■ arp ■ arp timeout ■ clea r a rp- cac he ■ clea r i p ro ute ■ clear t cp ■ interf ace ■ ip addr ess ■ ip adm i n-s tate ■ ip boot p-dhcp agen t-info ■ ip boot p-dhcp c i ...

  • Avaya 106760804 - page 186

    Chapt er 11 1 1-2 Command R eference Gui de for the Avaya P580 and P882 M ultiservic e Switches , v6.1 ■ ip irdp m ultica st ■ ip irdp p referenc e ■ ip mac- format ■ ip max- arp-entr ies ■ ip max- route-en tries ■ ip mult icast- routing ■ ip name-se rver ■ ip netbi os-re broadcast ■ ip ne tmas k-fo rm a t ■ ip proxy- arp ■ ip ...

  • Avaya 106760804 - page 187

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 IP ■ show ip i rdp ■ show ip r edistribut e ■ show ip r oute ■ show ip r oute summary ■ show ip sho r t-liv ed ■ show ip traff ic ■ show tcp c onfigura tion ■ show tcp c onnection s ■ show tcp st atis tics ■ show udp st atisti cs ...

  • Avaya 106760804 - page 188

    Chapt er 11 1 1-4 Command R eference Gui de for the Avaya P580 and P882 M ultiservic e Switches , v6.1 arp Command Mode Global Conf igurati on. Descr iption Creat es a perman ent entry in the Addr ess Resolu tion Prot ocol (ARP) tabl e. The no form of th is c omm an d d el ete s an e n try . Syntax Sample Output The foll owing exa mple adds a perma ...

  • Avaya 106760804 - page 189

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 IP arp ti meout Command Mode Interfa ce Configur ation. Description Configures t he amount o f time t hat an e ntry remai ns in t he ARP cache on an interfa ce. The no form of thi s command restores the defa ult value . Synt ax Sample Output The following e xample set s the arp ti meout perio d to 300 s ...

  • Avaya 106760804 - page 190

    Chapt er 11 1 1-6 Command R eference Gui de for the Avaya P580 and P882 M ultiservic e Switches , v6.1 clear a rp-ca che Command Mode Global Conf igurati on. Descr iption Delete s all d yna m ic e nt ries fro m the ARP ca che . Syntax clear a rp-cache Sample Output The foll owing exa mple clear s all dyn amic entries from th e ARP cache: (configure ...

  • Avaya 106760804 - page 191

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 7 IP clear ip ro ute Command Mode Global Configur atio n. Description Deletes rout es from the IP rou ting tabl e. Synt ax clear ip route { <net work > [ <mask> ] | *} Sample Output The following e xample dele tes ip r outes fro m the networ k with an IP address of 10.10.10.0 an d the mas k of ...

  • Avaya 106760804 - page 192

    Chapt er 11 1 1-8 Command R eference Gui de for the Avaya P580 and P882 M ultiservic e Switches , v6.1 clear tc p Command Mode Global Conf igurati on. Descr iption Ends th e TC P se ss ion tha t y ou s p ecif y . Syntax clear tcp [all | local <local-ip-a ddr ess> <loc al-tcp- port> remote <r emote- ip-addr ess> <r emote-tcp-por ...

  • Avaya 106760804 - page 193

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 9 IP interface Command Mode Global Configur atio n. Description Co nfi gur e s an inte rfac e typ e an d en te rs In ter face C on f i gur atio n mo de. T he no form o f thi s c om m and d ele tes a n inte rfa ce w it h th e na me sp eci fied. T o enter Inter face Confi guration mode, omit the [type {nbma ...

  • Avaya 106760804 - page 194

    Chapt er 11 1 1-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip addres s Command Mode Interf ace Config uration. Descr iption Assig ns a n IP add ress t o an in ter face . T o remove a n IP addr ess or disab le IP process ing, use th e no form of this command. Syntax Sample Output The foll owing exam ple ...

  • Avaya 106760804 - page 195

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 11 IP ip admin - st ate Command Mode Interfa ce Configur ation. Description Se ts th e adm in i s trat ive stat e o f an IP int erfa ce. T he d e fau lt sta t e is up . Synt ax ip admin -state {u p | down} Sample Output The foll owin g ex a mp le sets the ad mi n istr ativ e sta t e of a n inte rfa ce la ...

  • Avaya 106760804 - page 196

    Chapt er 11 1 1-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip bootp-dhc p agent-info Command Mode Global Conf igurati on. Descr iption Enabl es BOOTP/DHCP option 82, suboption 2 (agentID) . The no command di sables op tion 82, su boption 2. This subo ption iden tifies the IP addr ess and, i f availa bl ...

  • Avaya 106760804 - page 197

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 1 3 IP ip bootp-d hcp circuit- info Command Mode Global Configur atio n. Description Enables BOOTP/DHCP opti on 82, subopt ion 1 (circ uitID). The no command disabl es optio n 82, subopti on 1. This subopt ion ident ifies t he slot and ph ysical po rt number f rom which the DH CP re que st w as rec eiv ed ...

  • Avaya 106760804 - page 198

    Chapt er 11 1 1-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip bootp-dhc p relay Command Mode Global Conf igurati on. Descr iption Enabl es relaying BOOTP a nd DHCP service t o the BOOTP/DHCP server . The no command d isables r elaying BOOTP and DHCP s ervice t o the BOOT P/D HCP serv e r . T he de fau ...

  • Avaya 106760804 - page 199

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 1 5 IP ip bootp-d hcp serve r Command Mode Global Configur atio n. Description Adds a BOOTP/DHCP server ent ry . The no command removes the BOOTP/DHCP server ent ry . When you add a BOOTP/DHCP server entry , the swit ch serves as a BOOTP/DHCP relay ag ent betwee n the BOOTP/DHCP ser ver and th e requesti ...

  • Avaya 106760804 - page 200

    Chapt er 11 1 1-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip def aul t-ga tew ay Command Mode Global Conf igurati on. Descr iption Defin es a default gateway (rout er) when IP routi ng is disabl ed. The no form of this command remo ves a defa ult gate way . The default st ate is di sabled. Syntax Samp ...

  • Avaya 106760804 - page 201

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 1 7 IP ip dir ected broadcas t Command Mode Interfa ce Configur ation. Description When the IP Direc ted-Broad cast fea ture is e nabled, it allows a net-dire cted broadcast (unicast IP add ress with the host I D set to a ll ones) to be forwarded by the rout er on the selected interfa ce. The d efault set ...

  • Avaya 106760804 - page 202

    Chapt er 11 1 1-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip domain-li st Command Mode Global Conf igurati on. Descr iption Defin es a defau lt domain na me to complet e unquali fied host names. Y ou can defi ne a maximum of six defaul t domain name s. The no form of this command r emoves the d omain ...

  • Avaya 106760804 - page 203

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 1 9 IP ip domain-looku p Command Mode Global Configur atio n. Description Enables DNS clie nt. The no form of this comm and disabl es DNS clie nt. Synt ax Sample Output The following e xample enabl es DNS. (configure)# ip doma in-lookup Systems P550R, P580, P880, and P882. To E n a b l e : ip domain-look ...

  • Avaya 106760804 - page 204

    Chapt er 11 1 1-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip domain-name Command Mode Global Conf igurati on. Descr iption Defin es a defau lt domain na me to complet e unquali fied host names. Y ou can defi ne a maximum of six defaul t domain name s. The no form of this command r emoves the d omain n ...

  • Avaya 106760804 - page 205

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 2 1 IP ip http Command Mode Global Confi gur at io n. Description Enables or dis ables HTTP and ch anges the p ort number f or HTTP . V alid port numbers ar e 80 or a port number from 90 00 through 65535. The def ault setting is por t 80. Once you chang e the TCP port nu mber for HTTP , only users who kn ...

  • Avaya 106760804 - page 206

    Chapt er 11 1 1-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip ird p Command Mode Interf ace Config uration. Descr iption Enabl es the ICMP Rout er Discovery Protocol ( IRDP) on an i nterface. The no form of this command r estores th e default , which is d isabled. Syntax Sample Output The foll owing ex ...

  • Avaya 106760804 - page 207

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 2 3 IP ip ird p hold time Command Mode Interfa ce Configur ation. Description Sets the leng th of time , in seconds , that adv ertisements are held v alid. The holdtim e value must be gr eater th an the maxadver tinterv al valu e and cannot be greate r than 9000 seconds. The range is 5 - 9000 seconds. The ...

  • Avaya 106760804 - page 208

    Chapt er 11 1 1-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ird p ma xadve rtint erval Command Mode Interf ace Config uration. Descr iption Sets the maximum interval in sec onds between advertis ements. The range is 4 to 1800 s econds. The defaul t value i s 600 second s. The no comm an d re sto re s th ...

  • Avaya 106760804 - page 209

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 2 5 IP ip ird p minad verinter val Command Mode Interfa ce Configur ation. Description Sets the minimum i nterv al in s econds between adve rtis ements. The rang e is 3 to 1799 se conds. The de fault se tting is 450 seconds . Changin g the maxadver ti nte rval va lue auto matica ll y changes the min adver ...

  • Avaya 106760804 - page 210

    Chapt er 11 1 1-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip ird p multica st Command Mode Interf ace Config uration. Descr iption Sets the route r discove ry address ing mode. For ces this interfa ce to send adverti sements t o the multi cast addr ess (224.0 .0.1) in stead of I P broadcas t address ( ...

  • Avaya 106760804 - page 211

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 2 7 IP ip ird p prefe rence Command Mode Global Configur atio n. Description Sets the pref erence of the addr ess as a de fault ro uter addr ess, rela tive to other rou ter addre sses on the same su bnet. The min imum value (80 000000 hex) is us ed to indi cate that t he addres s should not be used by nei ...

  • Avaya 106760804 - page 212

    Chapt er 11 1 1-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip mac-format Command Mode Interf ace Config uration. Descr iption Sets the MAC for mat of the I P interf aces. The n o form of th is command restor es the default ethv2. Syntax Sample Output The f ollo w ing e xam p le s ets t he M AC fo rmat ...

  • Avaya 106760804 - page 213

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 2 9 IP ip max- arp-entri es Command Mode Global Confi gur at io n. Description Specifies t he maximum number o f ARP cache en tries al lowed in t he ARP cache. The def ault maxi mum number of entr ies is 16,3 84. The no co mmand restore s the de fault se tting. Synt ax Sample Output The following e xample ...

  • Avaya 106760804 - page 214

    Chapt er 11 1 1-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip max- route- entri es Command Mode Global Conf igurati on. Descr iption Speci fies the maximum number of routes t hat can be added to t he routin g table. Th ese route s refer to IP Unicas t entri es only . The defaul t number of routes i s 1 ...

  • Avaya 106760804 - page 215

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 1 IP ip mult icas t-routi ng Command Mode Global Configur atio n. Description Gl oba lly enab les IP mult icas t rou ting . I P mu ltic ast rout ing mus t be ena bled to config ure IGMP or DVMRP . The n o form of th is command disables IP multic ast rout ing. The def ault sta te is dis abled. Synt ax Sa ...

  • Avaya 106760804 - page 216

    Chapt er 11 1 1-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip name-se rver Command Mode Global Conf igurati on. Descr iption Adds a DNS s erver add ress. The no form o f th is com man d re m ove s the DNS server address. Syntax Sample Output The foll owing exam ple adds t he DNS address 210 .120.87.90. ...

  • Avaya 106760804 - page 217

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 3 IP ip netbio s-rebr oadcast Command Mode Interfa ce Configur ation. Description Enables NETBIOS rebroa dcasts on an interf ace. The no form of th is command disabl es NETBIOS rebr oadcasts on an inte rface (d efault). Synt ax Sample Output The following e xample enabl es NETBIOS reb roadcasts an d acc ...

  • Avaya 106760804 - page 218

    Chapt er 11 1 1-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip netmas k-for m at Command Mode Global Conf igurati on. Descr iption Specif ies the fo rma t of net mask s in t he show command o utput. The no for m of this command re stores t he defaul t, which is a dotted d ecimal for mat. Syntax Sample O ...

  • Avaya 106760804 - page 219

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 5 IP ip prox y- arp Command Mode Interfa ce Configur ation. Description Enables proxy ARP on an inte rf ace . Th e no for m of thi s comman d disa bl es proxy ARP on an i nterfac e. The defa ult stat e is disabl ed. Synt ax Sample Output The following e xample disa bles prox y ARP on IP interf ace Bosto ...

  • Avaya 106760804 - page 220

    Chapt er 11 1 1-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip proxy-arp -default- rout e Command Mode Global Conf igurati on. Descr iption Enabl es use of t he defaul t route a s the route f or proxy ARPs . The no command di sable s use of t he def ault route as the route for p rox y ARPs. The default ...

  • Avaya 106760804 - page 221

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 7 IP ip proxy- arp -l imit Command Mode Global Configur atio n. Description Enables proxy ARP . When enabled, the ro uter only re sponds to ARP requests when the source and tar get IP add ress are in the same IP network and dif ferent IP subnet s. When disable d, the rout er only r esponds to ARP reques ...

  • Avaya 106760804 - page 222

    Chapt er 11 1 1-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip redir ect s Command Mode Interf ace Config uration. Descr iption Enabl es the sending of redire ct messages when the route r is forced to resen d a packet throug h the same int erface on which it was receive d. The no for m of this command d ...

  • Avaya 106760804 - page 223

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 3 9 IP ip r eset-st at s Command Mode Global Configur atio n. Description Resets the IP statist ics. Synt ax ip reset -s tat s Sample Output The foll owin g ex a mple rese ts th e IP s t a tist ics. (configure)# ip r eset-s tats Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 224

    Chapt er 11 1 1-40 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip route Command Mode Global Conf igurati on. Descr iption Creat es a st atic r oute. The no form of this co mman d remove s a st ati c route . The defau lt stat ic routi ng prefer ence is Low . Syntax To C r e a t e : rout e <r oute-addr> ...

  • Avaya 106760804 - page 225

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 4 1 IP Sample Output The following e xample est ablishes a s tatic r oute on ip a ddress 10. 10.10.1, mask 255.25 5.0.0 with a n ext hop addres s of 10.15.1. 1 and a low pa th cost. (configure)# ip ro ute 10.10 .10.1 255.255.0.0 10.15.1.1 low Systems P580 and P882. ...

  • Avaya 106760804 - page 226

    Chapt er 11 1 1-42 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip route- preferen ce Command Mode Global Conf igurati on. Descr iption Assig ns prefer ence value s to rout es. The IP r outing ta ble use s these va lues to deter mine the be st ro utes. The no form of thi s command res tores th e default set ...

  • Avaya 106760804 - page 227

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 4 3 IP ip routin g Command Mode Global Configur atio n. Description Enables IP rou ting. The no form of thi s command disa bles IP r outing. The defa ult stat e is e n able d. Synt ax Sample Output The following e xample enabl es IP rou ting. (configure)# ip r outing Systems P550R, P580, P880, and P882. T ...

  • Avaya 106760804 - page 228

    Chapt er 11 1 1-44 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip routing-mode Command Mode Interf ace Config uration. Descr iption Sets the IP rou ting mode on a n interf ace. The no f orm of this co mmand restor es the defaul t set ti ng of R T_MGMT . Syntax Sample Output This exampl e ena bles lo cal pa ...

  • Avaya 106760804 - page 229

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 4 5 IP ip short-lived Command Mode Global Confi gur at io n Description En ab les a fi lter for a sho r t -liv ed I P pr otoc ol. Synt ax Sample Output T o send all SNMP packets t o supervis or module for slow path rou ting, ente r the fo llowing comm and: (configure)# ip s hort-liv ed udp 161 T o send al ...

  • Avaya 106760804 - page 230

    Chapt er 11 1 1-46 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip source -route Command Mode Global Conf igurati on. Descr iption Allows the route r to handl e IP data grams with s ource-rou ting heade r options. The no f orm of this command discards any IP dat agrams contain ing a sourc e-route option . T ...

  • Avaya 106760804 - page 231

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 4 7 IP ip telnet inactivit y-p eriod Command Mode Global Configur atio n. Description Se ts th e IP te lne t ina c tivi ty p er iod . Spe cif i e s ho w many sec onds a te lnet session i s to remain ope n wi th no activ ity . The default i s 900 sec onds, or 15 minutes. The no comma nd restores t he defau ...

  • Avaya 106760804 - page 232

    Chapt er 11 1 1-48 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip telnet Command Mode Global Conf igurati on Descr iption Enable s or dis ab les T e lne t an d ch an ges the T CP po rt n umbe r fo r T eln et. V ali d port numbers a re 23 or a port numb er from 9000 through 653 55. Once you change the TCP p ...

  • Avaya 106760804 - page 233

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 4 9 IP ip vlan Command Mode Interfa ce Configur ation. Description Sp eci fies th e V L AN o n whi ch a n IP in terf ace re sid es. T he no form o f th is com m an d s ets the IP inte rfa ce to th e Dis card v lan . Synt ax Sample Output The following e xample s pecifie s that th e interf ace label ed “ ...

  • Avaya 106760804 - page 234

    Chapt er 11 1 1-50 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 pin g Command Mode Privil eged. Descr iption Checks host reac habilit y and networ k connecti vity . Syntax ping <ip- addr> [ <co unt> [ <del ay> [ <siz e> [ <timeout> [{qu iet}]]] ]] Sample Output The followi ng e ...

  • Avaya 106760804 - page 235

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 1 IP redistribute Command Mode Router Confi guratio n (RIP or OSPF). Description Creates an IP redistr ibute li st entry . IP re dis trib ute lis t en trie s co n trol the di stri but ion of stat ic, local , or dynamicall y learned routes f rom one prot ocol to an other prot ocol. Route redistr ibution ...

  • Avaya 106760804 - page 236

    Chapt er 11 1 1-52 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Syst ems P580 and P882. T able 1 1-28. Parameters, Keywords, Arguments Name Defi nitio n ospf Redi stribut es OSPF routes to RIP . Y ou must be in RIP Router Configurat ion mode to enter thi s keyword. rip Redistributes RIP routes to OSP F . Y ...

  • Avaya 106760804 - page 237

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 3 IP show arp Command Mode User . Description Displays the ARP cache. Synt ax show arp [ <ip-addr > ] [ <if-name > ] [s ta tic] Sample Output The following e xample disp lays the ARP cache e ntry for IP address 122.100.0. 17. > show arp 12 2.100.0.17 Systems P550R, P580, P880, and P882. T ...

  • Avaya 106760804 - page 238

    Chapt er 11 1 1-54 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show host s Command Mode User . Descr iption Displ ays DNS Client i nformation . Syntax show hosts Sample Output The foll owing command di splays th e DNS Client i nformation. > show host s Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 239

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 5 IP show ip ar p Command Mode User . Description Displays the Address Resolution Pr otocol (ARP) cache. Synt ax show ip arp [ <ip- addr> ] [ <i f-name> ] [sta ti c] Sample Output The following e xample disp lays the ARP cache e ntry for IP address 122.100.0. 17. > show ip ar p 122.100.0. ...

  • Avaya 106760804 - page 240

    Chapt er 11 1 1-56 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip interface Command Mode User . Descr iption Displa ys co nfig ura t ion inform at io n fo r the I P in terf ac e. Syntax show ip in terface [<inter face-nam e>] Sample Output The foll owing comman d displ ays infor mation for the i ...

  • Avaya 106760804 - page 241

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 7 IP show ip ird p Command Mode User . Description Displays ICMP Router Discover y Protocol (IRDP) confi guration. Synt ax sho w ip ir dp [ <interfac e-name> ] Sample Output The following e xample disp lays the IRDP configur ation on t he switch . > show ip i rdp Router# show ip irdp Console ha ...

  • Avaya 106760804 - page 242

    Chapt er 11 1 1-58 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip red istribute Command Mode User . Descr iption Displ ays IP redis tr ibu te li st entries . Syntax show ip re distrib ute Sample Output redistribute ospf route into rip redistribute static route into rip redistribute local route into ri ...

  • Avaya 106760804 - page 243

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 5 9 IP show ip r oute Command Mode User Description Displays inf ormation ab out the IP unicas t routin g table. Synt ax show ip r oute [{ri p | ospf | local | un known | s tatic}] [ <ip-addr > ] [ <if- name> ] Sample Output The foll owin g ex amp le di spl ay s th e IP R o ute s tat ic in fo ...

  • Avaya 106760804 - page 244

    Chapt er 11 1 1-60 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip route summary Command Mode User . Descr iption Displ ays a summary of the rou ting table. Syntax show ip ro ute summary Sample Output IP Route Summary: Current number of routes: 3 Peak number of routes : 3 Total routes added : 4 Total r ...

  • Avaya 106760804 - page 245

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 6 1 IP show ip short- lived Command Mode Global Confi gur at io n Description Displays the short-li ved IP protocol filter s that ar e current ly enable d. Synt ax show ip s hort-li ved Sample Output After you e nter the show ip sho r t-li ved c om m and , the sw itc h di spl ay s th e filter s that ar e ...

  • Avaya 106760804 - page 246

    Chapt er 11 1 1-62 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show i p tr affic Command Mode User . Descr iption Displa ys I P t raffic sta tisti cs info rma tion. Syntax show ip t ra ffic Sample Output The foll owing exa mple displ ays the I P traf fic statis tics inf ormation. > show ip tr affic IP s ...

  • Avaya 106760804 - page 247

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 6 3 IP show tcp conf igura tion Command Mode User . Description Displays the current TCP port sett ings for T elnet a nd HTTP . Synt ax show tcp configurati on Sample Output The following exampl e displa ys the current TCP port setti ngs for T elnet and HTTP: > show tcp configurat ion Telnet port: 9998 ...

  • Avaya 106760804 - page 248

    Chapt er 11 1 1-64 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show tcp connection s Command Mode User . Descr iption Displ ays a list o f open TCP conn ections. Syntax show tcp c onnections Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 249

    Docu ment N o. 10 -3 00 090 , Issu e 1 11 - 6 5 IP show tcp st atistic s Command Mode User . Description Displays TCP conn ection st atisti cs. Synt ax show tcp statist ics Sample Output TCP statistics Retransmit timeout algorithm : vanj Retransmit timeout minimum : 0 (millisecs) Retransmit timeout maximum : 240000 (millisecs) Maximum num of connec ...

  • Avaya 106760804 - page 250

    Chapt er 11 1 1-66 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ud p st atistics Command Mode User . Descr iption Displ ays UDP connec tion stat istics. Syntax show udp st atisti cs Sample Output UDP statistics Total datagrams received : 10722 Datagrams without ports : 0 Datagrams in error : 0 Total Da ...

  • Avaya 106760804 - page 251

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 12-1 12 IP-RIP Ove rview This chapt er descri bes the f ollowing c ommands: ■ defa ult-metr ic ■ ip rip a uth ent ic ati on k ey ■ ip rip a uth ent ic ati on mo de ■ ip rip d efa ult -rou t e-m ode ■ ip rip p ois on- re ve rse ■ ip rip r ece ive vers i ...

  • Avaya 106760804 - page 252

    Chapt er 12 12-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 defaul t-metr ic Command Mode Interf ace Config uration. Descr iption Sets the de fau lt RIP route metric . The no form of thi s com mand re store s the default value. The default s etting i s 1. Syntax Sample Output The foll owing exa mple sets the ...

  • Avaya 106760804 - page 253

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-3 IP-RIP ip r ip auth entica tion key Command Mode Interfa ce Configur ation. Description Se ts th e aut hen tica tio n p ass w ord u sed on t he int erfa c e. Th e no form of th is command clear s the pass word. Synt ax Sample Output The following e xample set s the auth enticat ion stri ng used on i nterf ...

  • Avaya 106760804 - page 254

    Chapt er 12 12-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip rip authentica tion mode Command Mode Interf ace Config uration. Descr iption Speci fies the type of au thenticati on mode used i n RIP V ersion 2 packet s. Use the no form of thi s command to r estore the default v alue of non e. Syntax Sample O ...

  • Avaya 106760804 - page 255

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-5 IP-RIP ip rip de fault-rout e-mode Command Mode Interfa ce Configur ation. Description Sets the RIP de fault ro ute chara cteristic s. The no form of thi s command disables the de fault ro ute chara cteri stics. Synt ax Sample Output The foll owin g ex amp le se ts the RIP d efa ult r oute c har act eris ...

  • Avaya 106760804 - page 256

    Chapt er 12 12-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip rip poison-reverse Command Mode Interf ace Config uration. Descr iption Enabl es split -horizon with poison reverse on an inter face. The no form of this co mmand disab les the p oison- reverse me chanism. The defaul t state i s split- horizon wi ...

  • Avaya 106760804 - page 257

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-7 IP-RIP ip r ip rece ive ver sion Command Mode Interfa ce Configur ation. Description Specifies a RIP version to re ceive on an interfa ce basis. Use the no form of this command t o restore t he default s etting o f RIP V e rsion 1. Synt ax Sample Output The followin g exa mple speci fi es that the int erf ...

  • Avaya 106760804 - page 258

    Chapt er 12 12-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip rip send version Command Mode Interf ace Config uration. Descr iption Speci fies a RIP version to send on an inte rface basis. Use th e no form of this command t o restor e the defa ult sett ing of RIP V ersio n 1. Syntax Sample Output The fo llo ...

  • Avaya 106760804 - page 259

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-9 IP-RIP ip rip send-re ceive-mod e Command Mode Interfa ce Configur ation. Description Sets the RIP Sen d and Receiv e mode on an i nterface . The defaul t state is talk -lis ten. Synt ax ip ri p send-rec eive-mode { talk-onl y | list en-only | talk-l isten} Sample Output The following e xample set s rip s ...

  • Avaya 106760804 - page 260

    Chapt er 12 12-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 net wor k Command Mode RIP Router Configurati on. Descr iption Enabl es RIP rout ing on a net work or net works. The no form of th is command di sables RI P routing. Syntax Sample Output The foll owing exam ple enabl es RIP on the 1 1.0.0.0 sub ...

  • Avaya 106760804 - page 261

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-1 1 IP-RIP output-d elay Command Mode RIP Router Con figuration. Description Sp eci fies th e in terpa cke t dela y fo r RIP upda tes. T he no for m of thi s command remov es a delay definitio n. The defaul t delay t ime is 1 secon d. Synt ax Sample Output The foll owin g ex a mple sets the in terp a cke t ...

  • Avaya 106760804 - page 262

    Chapt er 12 12-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 router rip Command Mode Global Conf igurati on. Descr iption Global ly enable s or disable s RIP . The no form of t he command dis ables RIP . T he d e fau lt sta t e is E nab l ed. Syntax Sample Output The f ollo wing ex ampl e en ables RIP o n ...

  • Avaya 106760804 - page 263

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-13 IP-RIP timers bas ic Command Mode RIP Router Con figuration. Description Ad jus ts RI P ne twor k tim e rs. The n o fo rm of this c omm and re sto res the default t imers. The default f or the upd ate timer is 30 sec onds, and the invalid t ime default is 120 seco nds. Synt ax Sample Output The following ...

  • Avaya 106760804 - page 264

    Chapt er 12 12-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 triggered up dates Command Mode RIP Router Configurati on. Descr iption Global ly enable s the use of RIP trigge red update s. The no form of thi s command gl obally di sables RI P trigger ed updates . The defaul t state is disable d. Syntax Sam ...

  • Avaya 106760804 - page 265

    Docu ment N o. 10 -3 00 090 , Issu e 1 12-15 IP-RIP show ip r ip st atis ti cs Command Mode User . Description Displays RIP in terface statis tics. Synt ax sho w ip ri p s tati stic s Sample Output The followi ng example d isplays I P inte rface st atisti cs on inte rface 3. > show ip ri p st atis tic s intf3 10.0.3.45 State is DOWN Triggered Up ...

  • Avaya 106760804 - page 266

    Chapt er 12 12-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 267

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 13-1 13 IPX Ove rview This chapt er descri bes the f ollowing c ommands: ■ clea r i px r out e ■ clear i px s erv ice ■ ipx advert is e-def aul t- rou te -only ■ ipx defaul t- ro ute ■ ipx delay ■ ipx down ■ ipx gns-re ply -disa ble ■ ipx gns-re sp ...

  • Avaya 106760804 - page 268

    Chapt er 13 13-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ ipx sa p-network- filter ■ ipx send- receive- mode ■ ipx send- trig gered-upda tes ■ ipx se rvice ■ ipx type- 20-propag ation ■ ipx upd ate inte rval ■ ipx vlan ■ show ipx ca che ■ show ip x interf ace ■ show ip x rip stati sti ...

  • Avaya 106760804 - page 269

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-3 IPX clear ipx route Command Mode Global Confi gur at io n. Description Deletes rout es from the IPX routing t able. This command only de letes routes l earned via the RIP rout ing prot ocol. S tati c and lo cal rout es canno t be deleted u sing this command. Synt ax clear ipx route { <netw ork > | d ...

  • Avaya 106760804 - page 270

    Chapt er 13 13-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear ip x servic e Command Mode Global Conf igurati on. Descr iption Delete s se rv ice s fro m the IP X ser vic e tab l e. T h is co mm an d o nly de lete s service s learne d via the S AP protoc ol. St atic se rvices ca nnot be del eted using th ...

  • Avaya 106760804 - page 271

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-5 IPX ipx advert ise-de fault-r oute-onl y Command Mode Interfa ce Configur ation. Description Advertises only t he defaul t RIP rout e. The no for m of this c ommand advertis es all kn own rout es out the interfa ce. Synt ax Sample Output The following e xample adver tises o nly the def ault RIP r oute con ...

  • Avaya 106760804 - page 272

    Chapt er 13 13-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ipx defa ult-route Command Mode Global Conf igurati on. Descr iption Forwar ds all pa ckets for which a rou te to the destinat ion networ k is unknown, to t he defa ult ne twork. The no form of this c ommand rest ores t he default state whi ch disab ...

  • Avaya 106760804 - page 273

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-7 IPX ipx delay Command Mode Interfa ce Configur ation. Description Se ts th e ti ck s fo r an IP X int erfa ce. T he n o form of th is co m man d re sto re s the syste m default, which is 1 tick. Synt ax Sample Output The foll owin g ex a mp le sets the ti cks for t he int erfa ce l ab ele d “b o ston ? ...

  • Avaya 106760804 - page 274

    Chapt er 13 13-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ipx down Command Mode Interf ace Config uration. Descr iption Adminis tratively shuts down an IPX net work. The n o form restar ts the network. Th e default state is di sable, whi ch means IPX is n ot shut down. Syntax Sample Output The foll owing e ...

  • Avaya 106760804 - page 275

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-9 IPX ipx gns-reply -disable Command Mode Interfa ce Configur ation. Description Disables the sending of replies to IPX Get Nea rest Ser ver (GNS) queri es. The no fo rm restores t he defaul t state of enable d. Synt ax Sample Output The following e xample disa bles the sending of replies to the IP X GNS on ...

  • Avaya 106760804 - page 276

    Chapt er 13 13-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx gns- response- delay Command Mode Interf ace Config uration. Descr iption Sets the delay time (millis econds) whe n respondi ng to IPX GNS reques ts. The n o form of th is co mm an d re sto re s th e de fa ult. T he defau lt is zero , which ...

  • Avaya 106760804 - page 277

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-1 1 IPX ipx network Command Mode Interfa ce Configur ation. Description Enable IPX on a part icular int erface and sel ect the network numbe r and type of encapsu lation ( optional). Th e no form of this command d isables I PX routing. Th e IPX routi ng defaul t is disa bled, and t he defaul t encapsul atio ...

  • Avaya 106760804 - page 278

    Chapt er 13 13-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exa mple enabl es IPX routi ng on networ k 2 on an interfa ce labeled “boston” a nd sets en capsulat ion to SNAP . (config-if:boston)# ipx n etwork 2 encaps ulation s nap Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 279

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-13 IPX ipx output-rip- delay Command Mode Interfa ce Configur ation. Description Sets the i nte rpa cket del ay fo r RIP upda tes s ent on a si ngl e int er face. The no form of this command r esults i n no in terpacke t delay . The default st ate is enabled, whi ch is a 55- millisecond delay . Synt ax Samp ...

  • Avaya 106760804 - page 280

    Chapt er 13 13-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx out pu t -s ap- de la y Command Mode Interf ace Config uration. Descr iption Sets the in terpacke t delay fo r Serv ice Advert ising Prot ocol (SAP) updates sent on a single i nterfac e. The no form of this c ommand result s in no inter pac ...

  • Avaya 106760804 - page 281

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-15 IPX ipx rip Command Mode Interfa ce Configur ation. Description En ab les I P X RIP on a n inte rfa ce. T he n o f orm o f th is co mma nd di sab les IPX RIP o n th e i nte rfac e. Th e def ault inte r face set ting is IPX R IP en ab led. Synt ax Sample Output The foll owin g ex a mp le ena ble s I PX R ...

  • Avaya 106760804 - page 282

    Chapt er 13 13-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx rip-filt er Command Mode Interf ace Config uration. Descr iption Contr ols which ne tworks ar e present in RIP packe ts sent a nd receiv ed on the in terf ace. The n o fo rm of th is co mma n d re mov es the filte r fro m an interf ace. Synt ...

  • Avaya 106760804 - page 283

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-17 IPX Sample Output The following e xample: ■ sets th e IP X RI P f ilt e r pre ced e nce to 5 ■ sets th e st art- netw ork to 2 ■ sets t he end-net work to 3 ■ applie s filte rs to RIP pa ckets in both dire ctions (b oth) ■ adds the networ k to the r outing ta ble (all ow) ■ sets t he filt er ...

  • Avaya 106760804 - page 284

    Chapt er 13 13-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx rip -ma x- p acket size Command Mode Interf ace Config uration. Descr iption Enabl es th e maximum pa cket si ze for RIP up dates se nt ou t the int erfa ce. T o restor e the defaul t packet s ize, use t he no form of t his command. The defa ...

  • Avaya 106760804 - page 285

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-19 IPX ipx rip-multiplier Command Mode Interfa ce Configur ation. Description Sets the inter val at whic h a network ’ s RIP entr y ages out . The no form of this comm an d rest ores t he d efa ul t. T h e de fa ult v alue is th ree tim es th e R IP update int erval. Synt ax Sample Output The foll owin g ...

  • Avaya 106760804 - page 286

    Chapt er 13 13-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx route Command Mode Global Conf igurati on. Descr iption Adds a s tatic rout e to the r outing tabl e. The no for m of this c ommand removes a route fro m the ro uting tab le. Syntax Sample Output The foll owing exa mple adds a static r oute ...

  • Avaya 106760804 - page 287

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-21 IPX ipx router Command Mode Global Configur atio n. Description Enables the I PX RIP or IPX SAP prot ocol on a gl obal basi s. Use the n o form of the command to disable t he protocol s. The defau lt stat e is enabl ed. Synt ax Sample Output The following e xample disa bles IPX RIP on a global ba sis. (c ...

  • Avaya 106760804 - page 288

    Chapt er 13 13-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx routing Command Mode Global Conf igurati on. Descr iption Enabl es IPX routi ng. The no f orm of this command disab les IPX rout ing. The d efa ul t sta te is dis ab led . Syntax Sample Output The foll owing exa mple enabl es IPX routi ng. ( ...

  • Avaya 106760804 - page 289

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-23 IPX ipx sap Command Mode Interfa ce Configur ation. Description Enables IPX SAP on a n inte rface. The no form of t his comman d disables IPX SAP on an interface. Defaul t interf ace sett ing is I PX SAP enabled. Synt ax Sample Output The following e xample disa bles IPX SAP on an inter face labele d “ ...

  • Avaya 106760804 - page 290

    Chapt er 13 13-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx sap -ma x- p acke t s iz e Command Mode Interf ace Config uration. Descr iption Enabl es use of t he maximum packe t size for SAP updates s ent out th e inter face . Th e no fo rm of this comm and dis ables this fun c tion . Th e defa ult st ...

  • Avaya 106760804 - page 291

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-25 IPX ipx sap-mul tip lier Command Mode Interfa ce Configur ation. Description Se ts th e in te rva l at w h ich a ne tw or k or se rve r ’ s SA P e n try a ges out. The n o form of th is co mma nd re sto res t he def aul t, wh ich is th re e tim es th e SA P update int erval. Synt ax Sample Output The f ...

  • Avaya 106760804 - page 292

    Chapt er 13 13-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx sap -n a me- fi lte r Command Mode Interf ace Config uration. Descr iption Speci fies whic h service s (by name) are prese nt in S AP packets s ent and receive d on the in terf ace. The no f orm of this command re moves a f ilter from the in ...

  • Avaya 106760804 - page 293

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-27 IPX Sample Output The following e xample: ■ sets t he precede nce to 2 ■ sets th e fi lter-na m e to netbi os ■ sets th e se rvi ce typ e to 1 ■ applie s filte rs to SAP pac kets in bo th directi ons (both) ■ adds the servi ce to the service table (a llow) ■ sets t he filt er hops to 4 on an ...

  • Avaya 106760804 - page 294

    Chapt er 13 13-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx sap -n e tw ork -f ilt er Command Mode Interf ace Config uration. Descr iption Speci fies whic h service s (by networ k) are pres ent in SAP pac kets sent and receive d on the interf ace. The no f orm of this command re moves th e filte r fr ...

  • Avaya 106760804 - page 295

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-29 IPX Sample Output The following e xample: ■ sets th e SA P na me fi lter prec ede n ce t o 1 ■ sets th e fi lter-netw ork t o 3 ■ sets th e se rvi ce -ty pe to 2 ■ applie s filte rs to SAP pac kets in bo th directi ons (both) ■ adds the servi ce to the service table (a llow) ■ sets t he filt ...

  • Avaya 106760804 - page 296

    Chapt er 13 13-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx s end-recei ve-mo de Command Mode Interf ace Config uration. Descr iption Sets th e R IP/S AP se nd and rece ive cha ract eri stics of th e IP X in ter face . Th e no fo rm of t his co mma nd re sto res t he def au lt, w hich is ta lk-l is t ...

  • Avaya 106760804 - page 297

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-31 IPX ipx send-trigge red-up dates Command Mode Interfa ce Configur ation. Description Immediately se nds RIP or SAP u pdates to the networ k in respon se to changes in the networ k topology . The no command di sables tr iggered updates. The default setting is enable d. Synt ax Systems P550R, P580, P880, a ...

  • Avaya 106760804 - page 298

    Chapt er 13 13-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx servi ce Command Mode Global Conf igurati on. Descr iption Specif ies stat ic SA P en trie s. T o remo ve s tati c SAP ent ries , use the no fo r m of this command. The default is that n o static services are defi ned. Syntax To Configur e: ...

  • Avaya 106760804 - page 299

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-33 IPX Sample Output The following e xample a dds a stat ic servi ce to the service table. (configure)# ipx ser vice 4FS _ENG01 361 121 14 00:00: 00:00:00: 01 451 100.02:e0 :3b:00:45: 63 Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 300

    Chapt er 13 13-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx type -20-prop agation Command Mode Interf ace Config uration. Descr iption Speci fies wh ether or not an IPX i nterf ace acc epts an d forwar ds IPX ty pe 20 propagat ion packet broadcas ts. The def ault setti ng is dis abled. Syntax Sample ...

  • Avaya 106760804 - page 301

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-35 IPX ipx up date interval Command Mode Interfa ce Configur ation. Description Adjusts the RI P or SAP update interva l. The no for m of this c ommand restore s the defa ult, of 60 seconds. Synt ax Sample Output The followin g example modi fies the RIP update inter val to 1000 seconds on an interf ace labe ...

  • Avaya 106760804 - page 302

    Chapt er 13 13-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx vlan Command Mode Interf ace Config uration. Descr iption Specif ies t h e VLA N on whic h th e IPX inte rf ace opera tes . The no f o rm of this co mmand assi gns the IPX i nterfac e to the d iscard VLAN. Syntax Sample Output The foll owing ...

  • Avaya 106760804 - page 303

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-37 IPX show ip x ca che Command Mode User . Description Di spl ays th e co nten ts of the I P X fas t-sw itc h ing cache . Synt ax show ipx cache Sample Output The following i s an exampl e of the ou tput that display s after y ou enter t he show ipx cache command. PRE 6 Tree is IPX Access Rule is None Dest ...

  • Avaya 106760804 - page 304

    Chapt er 13 13-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ipx interface Command Mode User . Descr iption Displa ys t he det ails o f IPX inte rfac es c o nfig ure d on t he sw itch . Syntax show ipx i nterface [ <intf-name > ] Sample Output The foll owing is an example of the of t he output ...

  • Avaya 106760804 - page 305

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-39 IPX show ipx ri p st atist ics Command Mode User . Description Displays the following IPX RIP inte rface statisti cs: ■ T riggered Updates Sent ■ Non-tri ggered Upda tes Sent ■ Updates Re ceived ■ Requ est s Rece ive d ■ Bad Packet s Receive d Synt ax show ipx rip stat istics Systems P550R, P58 ...

  • Avaya 106760804 - page 306

    Chapt er 13 13-40 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ipx rip-filte r Command Mode User . Descr iption Displ ays IPX RIP fil ters. Syntax show ipx r ip-filter Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 307

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-41 IPX show ipx rout e Command Mode User . Description Displays the contents o f the IPX Rou ting T able. Synt ax show ipx route [{ <n etwork> | defa ult}] Sample Output The following i s an exampl e of the ou tput that display s after y ou enter t he show ipx r oute command . Codes: C - Connected pri ...

  • Avaya 106760804 - page 308

    Chapt er 13 13-42 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip x sa p st atis tic s Command Mode User . Command Mode Displays the foll owing IPX SAP in terface statist ics: ■ T rig gere d U p dat es S ent ■ Non-trig gered Updat es Sent ■ GNS Responses S ent ■ Upd ate s R ece iv ed ■ Reques ...

  • Avaya 106760804 - page 309

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-43 IPX show ipx sa p-name- fi lter Command Mode User . Description Displays IPX SAP na me filter s. Synt ax show ipx sap-name-f ilter Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 310

    Chapt er 13 13-44 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ipx s ap-network- filter Command Mode User . Descr iption Displ ays IPX SAP net work fi lters. Syntax show ipx sa p-network -filter Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 311

    Docu ment N o. 10 -3 00 090 , Issu e 1 13-45 IPX show ip x se rvice Command Mode User . Description Lists the IP X services added via s tatic c onfigurati on or disco vered thr ough Service Adv ertisin g Proto col (SAP) ad vertiseme nts. Synt ax show ipx service Sample Output The following i s an exampl e of the ou tput that display s after y ou en ...

  • Avaya 106760804 - page 312

    Chapt er 13 13-46 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show i px tr affic Command Mode User . Descr iption Displ ays the numbe r and type of IPX packe ts trans mitted and received . Syntax show ipx t raf fic Sample Output The foll owing is an example of the out put that displays a fter you enter th ...

  • Avaya 106760804 - page 313

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 14-1 14 Layer 3 Forwa rding Cache Ove rview This chapt er descri bes the f ollowing c ommands: ■ ip mu lt icas t ro ute- cac h e ag in g ■ ip mu lt icas t ro ute- cac h e ha sh- m ode ■ ip mu lt icas t ro ute- cac h e ma x -siz e ■ ip mu lt icas t ro ute- ...

  • Avaya 106760804 - page 314

    Chapt er 14 14-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip multicas t route- cache a ging Command Mode Global Conf igurati on. Descr iption Enable s a ging of IP m ul ticas t fo rw ardin g c ache en trie s. T he no form of t hi s command di sables a ging. The def ault st ate is en abled. Syntax Sample Ou ...

  • Avaya 106760804 - page 315

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-3 Layer 3 Fo r ward ing Cache ip mult icas t route- cache h ash-mode Command Mode Global Configur atio n. Description Configures th e ip multicas t route c ache hashi ng mode. The no form of this command resto res the de fault, whi ch is sa- da . Synt ax Sample Output The following e xample enabl es IP mu l ...

  • Avaya 106760804 - page 316

    Chapt er 14 14-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip mult icast route -cach e ma x-size Command Mode Global Conf igurati on. Descr iption Sets a maximum limit on the number of entr ies in th e ip multicas t route cache per forwardi ng chip. The no form of thi s command r estores the default , which ...

  • Avaya 106760804 - page 317

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-5 Layer 3 Fo r ward ing Cache ip mu lticas t route- cache r eadd-timeout Command Mode Global Configur atio n. Description This command i s useful o nly for ne tworks tha t are design ed to rout e mul ticas t tra ffic. If th e sw i tch i s not r unn i ng IG MP-O n ly o r a mu ltic ast routing pr otocol on mu ...

  • Avaya 106760804 - page 318

    Chapt er 14 14-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output The fo llowing exa mple sets the IP multicast route cache re- add tim eout interv al to 1 0 seconds. (configure)# ip mul t i cas t route - cac he read d -ti meou t 10 Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 319

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-7 Layer 3 Fo r ward ing Cache ip mult icas t route- cache u p date-ti meout Command Mode Global Configur atio n. Description Sets the peri od of cach e invali dation due to aging. Th e no form of this restore s the defa ult of 120 seconds. Synt ax Sample Output The following e xample set s the IP mul ticast ...

  • Avaya 106760804 - page 320

    Chapt er 14 14-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip unica st rout e- cache ag ing Command Mode Global Conf igurati on. Descr iption Enabl es aging of IP unicas t route c ache entr ies. The no f orm of thi s command di sables a ging. The def ault st ate is en abled. Syntax Sample Output The followi ...

  • Avaya 106760804 - page 321

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-9 Layer 3 Fo r ward ing Cache ip uni cast route-ca che hash -mode Command Mode Global Configur atio n. Description Configures th e IP unica st route cache hashi ng mode. Th e no form of this command resto res the de fault, whi ch is da- only . Synt ax Sample Output The followin g example con figures the IP ...

  • Avaya 106760804 - page 322

    Chapt er 14 14-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip unica st route- cache max-s ize Command Mode Global Conf igurati on. Descr iption Sets a maxi mum li m it on th e number of en tr ie s i n the i p un ic ast rout e cach e per for warding chi p. The no for m of this command resto res the de fa ...

  • Avaya 106760804 - page 323

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-1 1 Layer 3 Fo r ward ing Cache ip uni cast route-ca che up date-timeou t Command Mode Global Configur atio n. Description Sets the peri od of ip un icast r oute cache invalida tion due t o aging. The no form of this command res tores th e default of 120 sec onds. Synt ax Sample Output The following e xampl ...

  • Avaya 106760804 - page 324

    Chapt er 14 14-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx rou t e- cach e ag in g Command Mode Global Conf igurati on. Descr iption Enabl es and disa bles IPX r oute cache aging. The no form of th is command disable s aging. The default state is enabled. Syntax Sample Output The foll owing exa mple ...

  • Avaya 106760804 - page 325

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-13 Layer 3 Fo r ward ing Cache ipx route- cache hash -mode Command Mode Global Configur atio n. Description Configures th e IPX unicas t route c ache hashi ng mode. The no f orm of thi s command resto res the de fault, whi ch is da- only . Synt ax Sample Output The following e xample set s ipx route c ache ...

  • Avaya 106760804 - page 326

    Chapt er 14 14-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ipx rou t e- ca ch e max- s ize Command Mode Global Conf igurati on. Descr iption Sets a maximum limit on the numb er of ent ries in the IPX rou te cac he. The no form of this command r estores the defa ult, which s ets IPX route -cache max-size ...

  • Avaya 106760804 - page 327

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-15 Layer 3 Fo r ward ing Cache ipx route- cache up date-tim eout Command Mode Global Configur atio n. Description Sets the peri od of IPX route cache inva lidatio n due to aging . The no for m of this command r estores the defau lt of 120 sec onds. Synt ax Sample Output The following e xample set s the upda ...

  • Avaya 106760804 - page 328

    Chapt er 14 14-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip multicast cac he Command Mode User . Descr iption Displ ays the I P multicast L3 forwar ding ca che entries. Syntax show ip mult icas t cache Sample Output The f ollo wi ng ex ampl es sh ows a typ ica l IP m ulti cas t cac h e di spla y: ...

  • Avaya 106760804 - page 329

    Docu ment N o. 10 -3 00 090 , Issu e 1 14-17 Layer 3 Fo r ward ing Cache show ip u n ic ast ca che Command Mode User Description Di spl ays th e IP u nica st L3 forwa rdi ng c a che entr ie s. Synt ax show ip u nicast ca che Sample Output The following e xample shows a typical IP unicas t cach e display: > show ip uni cast cach e PRE 2 Destinati ...

  • Avaya 106760804 - page 330

    Chapt er 14 14-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show i px cach e Command Mode User . Descr iption Displa ys t he IPX f orw ardi ng c ach e e ntr ies. Syntax show ipx ca che Sample Output The foll owing exa mple show s a typica l IPX cache display: > show ipx ca che PRE 2 Destination Addres ...

  • Avaya 106760804 - page 331

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 15-1 15 LDAP Ove rview This chapt er descri bes the f ollowing c ommands: ■ ldap exe cutio n-option ■ ldap s ear ch-ba se ■ ldap s erv er pr imar y ■ ldap s erv er se c ond a ry ■ show ldap ...

  • Avaya 106760804 - page 332

    Chapt er 15 15-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ldap exe cution-o ption Command Mode Global Conf igurati on. Descr iption Sets whether A vaya Policy Manag er (APM) s tops or co ntinues to ap ply a policy i f an err or with a c ommand occurs. T he default settin g is stop-on- err or . Syntax Sampl ...

  • Avaya 106760804 - page 333

    Docu ment N o. 10 -3 00 090 , Issu e 1 15-3 LDAP ldap searc h-base Command Mode Global Confi gur at io n. Description Defines the Li ghtweight Dir ectory Acc ess Protoc ol (LDAP) searc h base. The no form of th is command remov es a sear ch base def inition. The search base defau lt is ou=Devices, o v=CajunRules, o=A vaya . * Note: If LDAP has no t ...

  • Avaya 106760804 - page 334

    Chapt er 15 15-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ldap ser ver prima ry Command Mode Global Conf igurati on. Descr iption Changes the prima ry LDAP server ’ s IP address an d port. The no form of this com mand rem oves the prim ary L DA P Ser ver ’ s IP Ad dre ss. The de fau lt IP ad dres s is ...

  • Avaya 106760804 - page 335

    Docu ment N o. 10 -3 00 090 , Issu e 1 15-5 LDAP ldap server sec ondary Command Mode Global Confi gur at io n. Description Changes the sec onda ry L DAP server ’ s IP Address a nd p ort . The no form o f this command r emoves the secondary LDAP Server’ s IP Address. The default p ort nu mber is: 389 . Syntax Sample Output The following e xample ...

  • Avaya 106760804 - page 336

    Chapt er 15 15-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show ldap Command Mode User . Descr iption Displa ys t he cur ren t L DAP co nf igu rati on i nform at ion. Syntax show ldap Sample Output The foll owing exa mple displ ays the LDAP co nfigurat ion in formation . > show ldap LDAP C onfi gurat ion ...

  • Avaya 106760804 - page 337

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 16-1 16 Logging Ove rview This chapt er descri bes the f ollowing comma nds: ■ logging clear ■ logging console ■ logging histo ry ■ logging history s ize ■ logging protocol event ■ logging shutdown size ■ logging traps ■ set sy slog ■ set sys log ...

  • Avaya 106760804 - page 338

    Chapt er 16 16-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 logging clear Command Mode Global Conf igurati on. Descr iption Clear s the cont ents of t he event l og. Syntax logging c lear Sample Output The f ollo wing ex ampl e cle ars the ev ent log . (configure)# loggi ng clear Delete Event Log (Y/N) y Eve ...

  • Avaya 106760804 - page 339

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-3 Loggin g logging console Command Mode Global Configur atio n. Description Se ts t he t ype of sy slog mes sag es t hat are sent t o th e co nsol e. T he no form of this command d isables the type s pecifie d. The defaul t setting i s: {syst em | switch_fa bric} Synt ax * Note: Use t he logging protocol ev ...

  • Avaya 106760804 - page 340

    Chapt er 16 16-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 service_por t Logs status changes in service p orts. Use the set port category comma nd to set a port as a service port . For info rmation on this command, see Chapt er 21 . This feature makes it possib le for you to use different notification level ...

  • Avaya 106760804 - page 341

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-5 Loggin g Systems P550R, P580, P880, and P882. unknown_mac Logs unknown MAC addres ses if received. login_st atus Lo gs User l ogin or logout. acl_log Logs packets that m atch access control rules . ssl_ss h Logs S SH events . T able 16-1. Parameters, Keywords, Arguments Name De fini tio n 3 of 3 ...

  • Avaya 106760804 - page 342

    Chapt er 16 16-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 loggin g his tory Command Mode Global Conf igurati on. Descr iption Sets the ty pe of syslo g message s that are s ent to the event log and s hutdown log. The no form of thi s command disa bles the type speci fied. The default settin g is {s tart | ...

  • Avaya 106760804 - page 343

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-7 Loggin g pow er Logs t h e ad diti on or remo va l of a po wer supp l y service_po rt Lo gs status ch anges in serv ice ports. Use the set po rt category co mmand to set a port as a service por t. For inform ation on this command, see Chap ter 21 . T his feature makes it poss ible for you to use different ...

  • Avaya 106760804 - page 344

    Chapt er 16 16-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems P550R, P580, P880, an d P882. vrrp Logs VRRP events, i f VRRP p rotocol even t logg ing is e nab led . unknown_m ac Logs unkn own MAC addresses if receiv ed. login_status Logs User login or logou t. acl_log Logs packets that match access co ...

  • Avaya 106760804 - page 345

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-9 Loggin g logging history size Command Mode Global Configur atio n. Description Ch an ge th e num ber of syslo g me ssag es sto red in th e event log. The no fo rm of this c ommand resets the numb er of messa ges to the default value, whic h is 512. Synt ax Sample Output The following e xample spec ifies t ...

  • Avaya 106760804 - page 346

    Chapt er 16 16-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 logging prot ocol event Command Mode Global Conf igurati on. Descr iption Sets the categ ories of the proto col event s that gen erate not ificat ions. If y ou enab le ev e nt n ot ific ati on for CL I, SNMP , RIP , OSP F , DV MR P , LD A P , Ap ...

  • Avaya 106760804 - page 347

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-1 1 Loggin g Sample Output The following e xample logs all of t he LDAP fault messages. (configure)# logg ing pr otocol ev ent ldap fault Completed set configuration for protocol eve nts. Systems P550R, P580, P880, and P882. T able 16-4. Parameters, Keywords, Arguments Name Definition {rip | ospf | dvm rp | ...

  • Avaya 106760804 - page 348

    Chapt er 16 16-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 logging shut down size Command Mode Global Conf igurati on. Descr iption Change the number of syslog mes sages sto red in the shutdown lo g. The no form of t his comman d resets the numbe r of message s to the d efault v alue, which is 16. Synta ...

  • Avaya 106760804 - page 349

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-13 Loggin g logging trap s Command Mode Global Configur atio n. Description Sets the type of syslog mess ages that are sent to SNMP trap rece ivers. The no form o f th is co mm and disa bles the typ e sp ecifie d. The d efa ult s ett ing is: {start | system | config | temp | r esource | fan | powe r | serv ...

  • Avaya 106760804 - page 350

    Chapt er 16 16-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exa mple sends all of th e switch_f abric sy slog message s to the SNMP trap receivers. (configure)# loggi ng traps swi tch_fabri c Syst ems P550R, P580, P880, an d P882. service_por t Logs status changes in service ...

  • Avaya 106760804 - page 351

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-15 Loggin g set sysl og Command Mode Global Configur atio n. Description Enables or dis ables sys log event reporti ng. The defau lt sett ing is di sabled. Synt ax set sy slog {enabl e | disa ble} Systems P580 and P882. ...

  • Avaya 106760804 - page 352

    Chapt er 16 16-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set sys l og fa ci lity Command Mode Global Conf igurati on. Descr iption Sets the event types, also call ed “faci lities ,” for whic h syslog ev ents are generat ed. The no c ommand sto ps g ene rat ing sysl og even ts for t he e vent type ...

  • Avaya 106760804 - page 353

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-17 Loggin g fan Logs fan status chan ges. Fan fa ilures will eventually lead to overh eating the system. The fan status message provides a goo d early warning for a failure that could eventually caus e the sw itch to shut d own. service_po rt Lo gs status ch anges in serv ice ports. Use the set po rt catego ...

  • Avaya 106760804 - page 354

    Chapt er 16 16-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Syst ems P580 and P882. cli Logs CLI events, if CLI even t logging is enab led. snmp Logs SNMP events, if SNMP protocol ev ent logg ing is e nab led . unknown_m ac Logs unkn own MAC addresses if receiv ed. vrrp Logs VRRP events, i f VRRP p rotoc ...

  • Avaya 106760804 - page 355

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-19 Loggin g set sysl og server _i p Command Mode Global Configur atio n. Description Sets the IP ad dresses o f remote sy slog serv ers to whic h you want sy slog events fo rwarded . The no command stops forwardin g syslog ev ents to t he syslog s erver that you specif y . Synt ax Systems P580 and P882. T o ...

  • Avaya 106760804 - page 356

    Chapt er 16 16-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set s yslog s everity Command Mode Global Conf igurati on. Descr iption Sets the sever ity of er ror messag es that you want logged. Ta b l e 1 6 - 9 describ es the di ffe rent sysl og severi ty level s. The switc h logs err or messages o f the ...

  • Avaya 106760804 - page 357

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-21 Loggin g show alarms Command Mode User . Description Displays the contents o f the act ive alar m table. Synt ax sho w alar ms Sample Output The following e xample disp lays the contents of the act ive alar m table. > show alar ms ---------- Active Alarms -------------- ------------------------------- ...

  • Avaya 106760804 - page 358

    Chapt er 16 16-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show loggin g Command Mode User . Descr iption Displ ays the co ntents of the event or shutdo wn log. The number of event s can be spe cified at t he end of t he command. Syntax show loggi ng [shutdo wn] [ <num-event s> ] Sample Output The ...

  • Avaya 106760804 - page 359

    Docu ment N o. 10 -3 00 090 , Issu e 1 16-23 Loggin g show sysl og buffer Command Mode User . Description Di spl ays ev en ts in th e sy sl og b uffer . Synt ax show sysl og buf fer Sample Output Systems P580 and P882. log ID ------ Event ID -------- TimeStamp --------------- Facility -------------- Severity --------------- 1 3 03-Sep-22 02:55 Conf ...

  • Avaya 106760804 - page 360

    Chapt er 16 16-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show syslog config Command Mode User . Descr iption Displ ays the cu rrent con figurat ion for sy slog ev ent repor ting. Syntax show sysl og config Sample Output Syslog Server: Enabled Severity: informational Server IP: 135.35.93.125 Facility: ...

  • Avaya 106760804 - page 361

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 17-1 17 Module Ove rview This chapt er descri bes the f ollowing c ommands: ■ reset-modul e ■ set modul e name ■ set modul e notes ■ show module ...

  • Avaya 106760804 - page 362

    Chapt er 17 17-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 reset- module Command Mode Global Conf igurati on. Descr iption Reset s an indiv idual mo dule other t han the sup ervis or module. Syntax reset- module <mod - num > * Note : Y ou cannot r eset an i ndividual module from t he W eb Agent. Sampl ...

  • Avaya 106760804 - page 363

    Docu ment N o. 10 -3 00 090 , Issu e 1 17-3 Modul e set module name Command Mode Global Configur atio n. Description Creates the n ame for a modul e. Omittin g the <mod- name > v aria ble cl ears the module n ame. Synt ax set modul e name <mo d-num> [ <mod- name> ] Sample Output The following e xample cre ates the name of the mod ...

  • Avaya 106760804 - page 364

    Chapt er 17 17-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set module notes Command Mode Global Conf igurati on. Descr iption Creat es a notes page for a module. Omi tting the <mod- not es> variab le clears the module n otes. Syntax set module notes <mod-num> [ <mod-no tes> ] Sample Output ...

  • Avaya 106760804 - page 365

    Docu ment N o. 10 -3 00 090 , Issu e 1 17-5 Modul e show module Command Mode User . Description Displays inf ormat ion a bout th e modu les in st al le d in the s wit ch c has sis. The default s tate di splays in formati on for al l module s instal led in t he switch. Synt ax show module [ <mod-n um> ] Sample Output The following exa mple dis ...

  • Avaya 106760804 - page 366

    Chapt er 17 17-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show module inventory Command Mode User . Descr iption Displa ys i nf orma tio n ab o ut th e hard ware in t he s w itch ch as sis. Syntax show module i nventory { <mod-num> | bp | all} Sample Output The foll owing example displays the i nvent ...

  • Avaya 106760804 - page 367

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 18-1 18 NEDR and IEDR Ove rview This chapt er descri bes the f ollowing comma nds: ■ set hunt group int ernal-e rror -shutdo wn ■ set in terna l-error -thresho ld ■ set por t inter nal-err or- shutdown ■ set por t netwo rk-error -detection ■ show huntg r ...

  • Avaya 106760804 - page 368

    Chapt er 18 18-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set h untgroup int ernal-error-shu t down Command Mode Global Conf igurati on. Descr iption Global ly enable s or disa bles intern al error detecti on and reco very (IEDR) for all ports i n hunt group s. * Note : All ports tha t have IEDR enabled, w ...

  • Avaya 106760804 - page 369

    Docu ment N o. 10 -3 00 090 , Issu e 1 18-3 NEDR and IEDR set internal-error-threshold Command Mode Global Configur atio n. Description Sets the IEDR th reshold f or inter nal erro rs. Whe n a port r eaches th is threshol d, it is shut down. By default this thr eshold is set to 10 inter nal errors in a 5-se cond ti me period. Y ou can set t he t hr ...

  • Avaya 106760804 - page 370

    Chapt er 18 18-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set port inte rnal -erro r-s h ut down Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles inter nal error detecti on and recover y (IEDR) on a port or ports Syntax Sample Output The foll owing exam ple enabl es IEDR on all por t ...

  • Avaya 106760804 - page 371

    Docu ment N o. 10 -3 00 090 , Issu e 1 18-5 NEDR and IEDR set port net work-erro r-dete ct ion Command Mode Global Configur atio n. Description Configure net work err or det ection an d r ecover y (NEDR) for a p ort or ports . Synt ax To E n a b l e : set port networ k-er ror -de tect ion <mod-por t-ran ge> [action {notify | disable- port}] [ ...

  • Avaya 106760804 - page 372

    Chapt er 18 18-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output The foll owing command se ts NEDR on po rts 1-5 on module 3. (configure)# set po rt netwo rk-err or -detection 3/ 1-5 Syst ems P550R, P580, P880, an d P882. <rising-th r eshold value> The rising t hresh old. The number o f CRC er ...

  • Avaya 106760804 - page 373

    Docu ment N o. 10 -3 00 090 , Issu e 1 18-7 NEDR and IEDR show huntgro up internal- error-conf ig Command Mode User Description Displays the IEDR settin g (enab led or disabl ed) for hunt groups and the glob al I EDR thre s hol d se ttin g. Synt ax show hunt group int ernal-er ror -config Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 374

    Chapt er 18 18-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show port internal-error- config Command Mode User . Descr iption Displa ys a li st of the por ts that hav e IEDR ena b led , the I EDR sett ing fo r hunt grou ps, and the global IEDR t hreshold setting. Syntax show port internal -error -config Syst ...

  • Avaya 106760804 - page 375

    Docu ment N o. 10 -3 00 090 , Issu e 1 18-9 NEDR and IEDR show port net work-error detectio n Command Mode User . Description Displays the ports tha t have NEDR enab led . Synt ax show port network- error -detec tion Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 376

    Chapt er 18 18-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 377

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 19-1 19 OSPF Ove rview This chapt er descri bes the f ollowing c ommands: ■ area ■ area as e-filt er ■ area d efau lt- cos t ■ area n ssa ■ area ra ng e ■ area s tub ■ area t ranslat e-nssa -to-exter nal ■ area v irtu al-l ink ■ ip ospf as-bounda ...

  • Avaya 106760804 - page 378

    Chapt er 19 19-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ ip os pf tr ans mit-d ela y ■ network ar ea ■ passiv e-inte rface ■ router o spf ■ show ip ospf ■ show ip ospf database ■ show ip ospf interf ace ■ show ip ospf neighbor ■ show ip ospf stats ■ show ip ospf virtual -links ■ ti ...

  • Avaya 106760804 - page 379

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-3 OSPF area Command Mode OSPF Router Conf iguration. Description Defines an OSPF Are a. T o remove an area, us e the no fo rm of th is command. Synt ax Sample Output The following c ommand removes t he OSPF Area f rom the indica ted route r . (configure router:ospf)# no area 10.0.0.123 Systems P550R, P580, ...

  • Avaya 106760804 - page 380

    Chapt er 19 19-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 area ase- fi lt er Command Mode OSPF Router Con figuration . Descr iption Enabl es the fil tering of type 3 ASE LSAs into an OSP F Area. T o disable the filteri ng of type 3 ASE LSAs, use th e no form of th is com m an d . Syntax Sample Output The f ...

  • Avaya 106760804 - page 381

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-5 OSPF area de faul t-cos t Command Mode OSPF Router Conf iguration. Description Defines the cost for rout es advertise d into stu b area by an area borde r router . T o rest ore the d e fau lt va lu e, us e th e no form o f thi s co mma nd. T he va lid range is 1 to 6553 5. The defaul t setting is 1. Synt ...

  • Avaya 106760804 - page 382

    Chapt er 19 19-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 area nssa Command Mode OSPF Router Con figuration . Descr iption Confi gure an ar ea as a Not S o Stub by Area (NSSA). T o remove the NSSA distin ction fr om the area , use the no form of th is co m man d. Syntax Sample Output The foll owing comman ...

  • Avaya 106760804 - page 383

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-7 OSPF area range Command Mode OSPF Router Conf iguration. Description Consolidates and summarizes r outes at an area bou ndary . T o disable this function, use th e no form of this comm and . Synt ax Sample Output The following c ommand sets a n area ran ge on th e indicated area. (configure router:ospf)# ...

  • Avaya 106760804 - page 384

    Chapt er 19 19-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 area stub Command Mode OSPF Router Con figuration . Descr iption Defin es an are a as a s tub area. Use th e no form of t his command to re move the stu b area distinctio n. Synta x Sample Output The foll owing comman d removes a s tub area o n the ...

  • Avaya 106760804 - page 385

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-9 OSPF area tr ans late-ns sa-to-e xternal Command Mode OSPF Router Conf iguration. Description Enables the t ranslat ion of typ e 7 LSAs into t ype 5. T o disable this featu re use t he no form of th is c omm and. Synt ax Sample Output The followi ng command enabl es the tra nslatio n of T ype 7 LSAs into ...

  • Avaya 106760804 - page 386

    Chapt er 19 19-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 area vi rt u al -li nk Command Mode OSPF Router Con figuration . Descr iption Defin es an OSPF vir tual link. T o remove a virt ual link, us e the no form of this co mmand. Syntax T o Configure : area <ar ea-id> virt ual-lin k <r outer- ...

  • Avaya 106760804 - page 387

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-1 1 OSPF Systems P550R, P580, P880, and P882. <transit- delay> Estimated number of second s it takes to transmit a link state update packet over this vi rtual link. The value range is 1- 3600. The def ault is 1. <passw d> Password to be used by neighbori ng router s. Any cont inuous string of ch ...

  • Avaya 106760804 - page 388

    Chapt er 19 19-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f as-boundar y-router Command Mode Global Conf igurati on. Descr iption * I mport ant: This command i s not suppo rted by v6.0 and la ter applicat ion soft ware. V ersi on 6.0 and l ater applic ation software aut omaticall y detect s the ...

  • Avaya 106760804 - page 389

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-13 OSPF ip o sp f auth enticat ion-k ey Command Mode Interfa ce Configur ation. Description Assign a passwor d to be use d by neighbo ring router s that ar e using OSPF’ s simple password authe nticati on. T o remove a previ ously ass igned OSP F password, us e the no form of th is command. Synt ax Sample ...

  • Avaya 106760804 - page 390

    Chapt er 19 19-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f a uto-vli nk-cre ate Command Mode Global Conf igurati on. Descr iption Enable s th e auto m ati c cr ea tio n of vi rtua l lin ks. U se t h e no form of th is command t o disable this behavior . Syntax Sample Output The foll owing comma ...

  • Avaya 106760804 - page 391

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-15 OSPF ip osp f cost Command Mode Interfa ce Configur ation. Description Specifies t he cost of sending a packet on a n interf ace. The no form o f thi s command resto res the de fault settin g of 1 . Th e valid r ange is 1 to 65 534. Synt ax Sample Output The following c ommand enab les the c ost of sen d ...

  • Avaya 106760804 - page 392

    Chapt er 19 19-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f dead-interval Command Mode Interf ace Config uration. Descr iption Sets the dead i nterva l time fo r neighbor s to decl are this router do wn. Dead interv al is the time t hat hell o packets a re not se en. This val ue must be the same ...

  • Avaya 106760804 - page 393

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-17 OSPF ip osp f ext -route- me tric Command Mode Global Confi gur at io n. Description Se ts th e me tric type u sed for e x tern al r ou tes to ty p e1 o r ty pe 2. U se th e no form of this command to r estore d efault va lues. The de fault va lues are: ■ loc al (t ype1 ) ■ rip (t ype2) ■ stat ic - ...

  • Avaya 106760804 - page 394

    Chapt er 19 19-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f he llo-interval Command Mode Interf ace Config uration. Descr iption Specif ies the he llo in ter val time. The h ell o int erval tim e is t he tim e be twee n hello pa ckets tha t the rou ter sends on t he inter face. The v alue range ...

  • Avaya 106760804 - page 395

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-19 OSPF i p o s pf m a x - pa t h s Command Mode Global Configur atio n. Description Configures th e maximum number of Si mple Path Fi rst (SPF) paths tha t OSPF can use. The path rang e values a re: ■ Minimum 640 (d efault) ■ Maximum 16000 Use the no form of this command to re store the default value ( ...

  • Avaya 106760804 - page 396

    Chapt er 19 19-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f message-dige st-key md5 Command Mode Interf ace Config uration. Descr iption Enable s OS PF M D 5 au th en tic ati on. Syntax Sample Output The foll owing comman d enables OSP F MD5 authen ticatio n on inter face 3 with a key ID of 155, ...

  • Avaya 106760804 - page 397

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-21 OSPF i p o s pf pa c k e t t r a c i n g Command Mode Global Confi gur at io n. Description Enables or disabl es OSPF packe t tracing. Synt ax Sample Output The following c ommand enables packet t racing. (configure)# ip ospf packet tracing Systems P550R, P580, P880, and P882. To E n a b l e : ip ospf pa ...

  • Avaya 106760804 - page 398

    Chapt er 19 19-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f poll interval Command Mode Interf ace Config uration. Descr iption Speci fies the poll inter val time. Th e valid r ange is 1 t o 3600 secon ds. The default sett ing i s 120 seconds . The no command r estor es the defa ult s etti ng. Sy ...

  • Avaya 106760804 - page 399

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-23 OSPF i p o s pf r e s e t - s ta ts Command Mode Global Configur atio n. Description Resets the OSPF gl obal sta tistics. Synt ax ip ospf rese t- st ats Sample Output The following c ommand reset s the OSPF glo bal stat istics. (configure)# ip o spf r eset-st ats Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 400

    Chapt er 19 19-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f retransmit- interval Command Mode Interf ace Config uration. Descr iption Specif ies the t i m e bet wee n li nk sta te a dvert isem ent retra ns missi ons for adjacen cies belon ging to the int erface. The no comma nd r est ores the d ...

  • Avaya 106760804 - page 401

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-25 OSPF ip osp f router-id Command Mode Global Configur atio n. Description Sets the router -id for the syst em. Use the no comma nd to rest ore the defaul t setting (the lowes t IP addre ss config ured on the system). * Note: OSPF must be di sabled fo r this comman d to take eff ect. If OSPF is enabl e on ...

  • Avaya 106760804 - page 402

    Chapt er 19 19-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip osp f t ransmit -delay Command Mode Interf ace Config uration. Descr iption Sets the esti mated time i t takes to transmi t a link s tate upda te packet on the interf ace. The ra nge is 1 t o 3600 second s. The defau lt is 1 s econd. T o rest ...

  • Avaya 106760804 - page 403

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-27 OSPF network are a Command Mode OSPF Router Conf iguration. Description Defines the int erfac es on which OSPF run s and defi nes an are a ID for tho se inte rfac es. T o disa bl e O SPF r out ing fo r int erf ace s d efin ed w ith t he <ip- addr ess> <wildcar d-mask> pa ir , use the no form ...

  • Avaya 106760804 - page 404

    Chapt er 19 19-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 p assive -interf ace Command Mode OSPF Router Con figuration . Descr iption Preve nts OSPF fr om sending routing u pdates ac ross the network. T o disable passive interfa ce, use the no form of th is co mm and. Syntax Sample Output The foll owin ...

  • Avaya 106760804 - page 405

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-29 OSPF router osp f Command Mode Global Confi gur at io n. Description Enables the OSPF p rotocol o n this sys tem. The no for m of th is command disables it globa lly . The default is dis abled . Synt ax Sample Output The following e xample enabl es OSPF routing . (configure)# r outer ospf Systems P550R, ...

  • Avaya 106760804 - page 406

    Chapt er 19 19-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip osp f Command Mode User . Descr iption Displ ays genera l informa tion about OSPF r outing. Syntax show ip osp f Sample Output The foll owing exam ple displ ays genera l informa tion about OSPF r outing. > show ip ospf Routing Process ...

  • Avaya 106760804 - page 407

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-31 OSPF show i p osp f d at a bas e Command Mode User . Description Di spl ays li sts o f in form atio n rela ted to the OSPF d ata bas e f or a speci fic router . Synt ax show ip o spf database [{asbr -summary | router | netwo rk | summary | nssa- exte rnal | e xte rn al} ] Sample Output The following c om ...

  • Avaya 106760804 - page 408

    Chapt er 19 19-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip osp f interface Command Mode User . Descr iption Displ ays the OSPF- related interfa ce infor mation. Syntax show ip o s pf in ter f a ce [ < int erf ace -na me> ] Sample Output The foll owing comman d displays the OSPF-re lated in ...

  • Avaya 106760804 - page 409

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-33 OSPF show ip osp f neighbor Command Mode User . Description Displays OSPF-ne ighbor inf ormation o n a per -inte rface bas is. Synt ax show ip o spf neighbor [ { <int erface-na me> | <neighbor -id> }] [ det ail] Sample Output The following c ommand displa ys OSPF neighbo r informat ion for t ...

  • Avaya 106760804 - page 410

    Chapt er 19 19-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip osp f st at s Command Mode User . Descr iption Displ ays OSPF stat istics . Syntax show ip ospf s tats Sample Output The foll owing command di splays OSPF s tatistics . > show ip ospf stats Ospf G loba l St ats Ospf s tate : Ac tive n ...

  • Avaya 106760804 - page 411

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-35 OSPF show ip o sp f virtual- links Command Mode User . Description Displays para meters that expl ain the c urrent s tate of OSPF virtual links. Synt ax show ip o spf virtual -links Sample Output The following c ommand displa ys par ameters abo ut the cur rent st ate of th e virtual links to the switc h. ...

  • Avaya 106760804 - page 412

    Chapt er 19 19-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 timers lsa-gr oup-p acing Command Mode Global Conf igurati on. Descr iption Sets the number of LSAs that shoul d be processed a t one time, du ring a SPF calcula tion. The v alid rang e is 1000 t o 16000. The de fault se tting is 1000. Use the n ...

  • Avaya 106760804 - page 413

    Docu ment N o. 10 -3 00 090 , Issu e 1 19-37 OSPF timers sp f Command Mode Global Configur atio n. Description Configures th e delay ti me (seconds ) between runs of OSPF’ s SPF calculat ion. Use th e no form of this co mm and to res tore the def au lt ( 3 seconds ). Th e valid ra nge is 3 t o 65535. Synt ax Sample Output The following c ommand s ...

  • Avaya 106760804 - page 414

    Chapt er 19 19-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 415

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 20-1 20 Policy Ove rview This chapt er descri bes the f ollowing c ommands: ■ acce ss-lis t ■ ip acce ss-group ■ ip acc ess -li st ■ ip acl -logging ■ ip acl -logging l ogging-i nterval ■ show acce ss-group ■ show acce ss-list s ■ show acl- match-t ...

  • Avaya 106760804 - page 416

    Chapt er 20 20-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 access -list Command Mode Global Conf igurati on. Descr iption Create s a rul e in a n acc ess co ntro l list (ACL ). Th e rule that y ou s e t is applied on all of the ports on the swit ch. * Note : Y ou must ena ble the ACL on which you want t o s ...

  • Avaya 106760804 - page 417

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-3 Policy T able 20-1. Parameters, Keywords, and Arguments Name Definition <access-list-name> A unique name that identifies the acces s control list. <access-list-index> The rule number within the access list. Index numbers can be 1 through 512. permit Forwards the packet without changin g its pr ...

  • Avaya 106760804 - page 418

    Chapt er 20 20-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8 The priority that you want to set. The number following the fwd specifies the priority . The fwd x ar guments are 1 -based, while the queue priorities are 0-based. Consequ ently , the 1-based pri ...

  • Avaya 106760804 - page 419

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-5 Policy Sample Output: St andard ACL Rules The followi ng table pro vides exampl es of sta ndard ACL rules. <dest-wild car d> The inverse of a networ k mask. Enter a 32-bit number in fo ur-par t, dotted decimal f ormat. Place ones in the bit positions that you want to mask. This parameter specifies a ...

  • Avaya 106760804 - page 420

    Chapt er 20 20-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output: Extended ACL Rules The foll owing ta ble provides example s of exten ded ACL rul es. • Replace the existing DSCP with a DSCP of 5 for all traf fic that has a source IP add ress in the 10.10.80 subnet. • Mask the three least signif ...

  • Avaya 106760804 - page 421

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-7 Policy Use the DSCP in the packet to classify all traffic th at has a: • Source IP address in the 3.0 subnet • D estination address in the 5.0 subnet • Mask the three least significant bits of the DSCP access-list MyAccessList2 2 permit use- dif fserv mas k ip 3.0.0.0 0.255.255 .255 5.0.0. 0 0.255.2 ...

  • Avaya 106760804 - page 422

    Chapt er 20 20-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems P550R, P580, P880, an d P882. • Use the lay e r 2 prior ity in the packet to classify all TCP traf fic that has a: — Source IP address in the 5.5.5 subne t — Desti nation IP address in th e 6.6. 6 sub net — Desti nation port that is ...

  • Avaya 106760804 - page 423

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-9 Policy CAUTION: ip access -group Command Mode Global Confi gur at io n Description Enables an acce ss control li st (ACL) and opti onally sets t he default ac tion to deny . The de fault-ac tion-deny option is a global s etting a nd is not a vailable in the W eb Agent. I f you us e the CLI to enab le the ...

  • Avaya 106760804 - page 424

    Chapt er 20 20-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The fo llowing comm and enabl es the acc ess-lis t fwdrule s : (configure)# ip acc ess-gr oup fwdrules Syst ems P550R, P580, P880, an d P882. T able 20-4. Parameters, Keywords, Arguments Name Definiti on <access- list-name > ...

  • Avaya 106760804 - page 425

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-1 1 Policy ip acces s- lis t Command Mode Global Confi gur at io n. Description Creates a rul e in an ac cess cont rol list (ACL). The ru le that y ou set is app lied on al l of th e po rts on t he sw itch. * Note: Y ou must enable the ACL on which you want to set a rule. Only one ACL can be enabled at a ti ...

  • Avaya 106760804 - page 426

    Chapt er 20 20-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ip acl-logging Command Mode Global Conf igurati on Descr iption Enabl es or disa bles ACL logg ing. The def ault set ting for ACL log ging is disable d. Syntax Syst ems P580 and P882. To E n a b l e : ip a cl-logging enable <acc ess-li st-nam ...

  • Avaya 106760804 - page 427

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-13 Policy ip acl-loggin g logging- inter val Command Mode Global Confi gur at io n Description Sets the inter val for ACL loggi ng. The vali d range i s 1 to 60 se conds. The default s etting i s 2 second s. Synt ax ip acl-l oggi ng log ging-i nt erv al <tim e-in-se conds> Systems P580 and P882. T abl ...

  • Avaya 106760804 - page 428

    Chapt er 20 20-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show a ccess-gro up Command Mode User . Descr iption Displa ys the ena b led acces s co ntrol list . Syntax show acces s-group Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 429

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-15 Policy show acces s-li st s Command Mode User . Description Displays the contents o f access lists co nfigured on the sw itch. The s witch displays all acce ss lists by defaul t. Synt ax show acc ess -l ists [ <acce ss-list -name> ] Sample Output The following c ommand displa ys the acc ess list s. ...

  • Avaya 106760804 - page 430

    Chapt er 20 20-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show acl-match-timer Command Mode Global Conf igurati on. Descr iption Displ ays the i nterval for logging of ACL matches. Syntax show acl- match-ti mer Sample Output Interval between logging of Access Rule Match es is 2 second(s) Syst ems P580 ...

  • Avaya 106760804 - page 431

    Docu ment N o. 10 -3 00 090 , Issu e 1 20-17 Policy show ip a cc ess-l i st s Command Mode User . Description Displays the contents o f the IP a ccess li sts confi gured on t he switch. The switch dis plays all acce ss list s by defaul t. Synt ax show ip a ccess-l ists [ <access- list-n ame> ] Sample Output The following c ommand displa ys th ...

  • Avaya 106760804 - page 432

    Chapt er 20 20-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 433

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 21-1 21 Port Ove rview This chapt er descri bes the f ollowing c ommands: ■ clear port count ers ■ set por t 3com-mappi ng-table ■ set por t allow-l earning ■ set por t aut o-flush ■ set por t auto -negotia tion ■ set por t auto-ne gotia tion-dupl ex-a ...

  • Avaya 106760804 - page 434

    Chapt er 21 21-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ set port mirror Fa bric_mode2 ■ set p ort name ■ set po rt networ k-error -det ection ■ set po rt pace- priorit y-mode ■ set p ort point -to-poin t admin status ■ set p ort rate -limi t-burst -size ■ set p ort rate -limi t-mode ■ s ...

  • Avaya 106760804 - page 435

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-3 Port clear port count ers Command Mode Global Confi gur at io n. Description Clears port e thernet statist ics counter s. Omitting input cl ears all por t counters on the switch. Sel ecting a mod- num clears all port counters on the module. By d efault, the counters of all por ts in th e switch ch assis a ...

  • Avaya 106760804 - page 436

    Chapt er 21 21-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set p ort 3com-mapping- t able Command Mode Global Conf igurati on. Descr iption Sets the 3Com mapp ing ta ble for a specifi ed switch p ort or al l switch p orts on a speci fied modul e. Syntax set port 3com-mappin g-table { <mod-num> | <m ...

  • Avaya 106760804 - page 437

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-5 Port set port allo w-learning Command Mode Global Confi gur at io n. Description Disables or e nables le arning fo r a spe cified sw itch port or all s witch port s on a speci fied module . Synt ax Sample Output The following e xample enabl es VLAN learn ing for t he seco nd switch p ort on the module in ...

  • Avaya 106760804 - page 438

    Chapt er 21 21-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set port aut o- fl u sh Command Mode Global Conf igurati on. Descr iption When au to- flu sh is ena bled a nd t he li n k to a port fails , all e ntr ies i n the addr ess f orwa rdi ng ta b le th at we re le arn e d for thi s port will be ma rke d i ...

  • Avaya 106760804 - page 439

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-7 Port set p or t auto -ne got iati on Command Mode Global Confi gur at io n. Description Enables or dis ables aut o-negotiat ion on the specifie d port or ports. Synt ax Sample Output The followi ng example enables auto-n egotiati on for the secon d fast etherne t port and po rts 7 thr ough 1 1 on the modu ...

  • Avaya 106760804 - page 440

    Chapt er 21 21-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set p ort a uto-negot iation- duplex- advert isement Command Mode Global Conf igurati on. Descr iption Confi gures auto negotiat ion adv ertisement o f the dupl ex capabil ity for a specifi ed port o r port s. Syntax set port auto-ne gotiati on-dupl ...

  • Avaya 106760804 - page 441

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-9 Port set p or t auto -ne gotia tion -flo w-co ntrol - adverti sement Command Mode Global Confi gur at io n. Description Sets the auto -negotia tion flo w control a dvertise ment on a modul e or range of modules. Synt ax set p ort aut o-negot iation- flow-cont rol-adve rtisem ent { <mod- num> | <m ...

  • Avaya 106760804 - page 442

    Chapt er 21 21-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort auto -negotia tion-speed- advertise ment Command Mode Global Conf igurati on. Descr iption Sets the auto- negotiat ion speed c apabili ty advert isement of fast et hernet ports t o support s peeds of 1 0Mbps, 100Mbps , or eithe r . Syn ...

  • Avaya 106760804 - page 443

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-1 1 Port set p or t auto -vla n-cr eate Command Mode Global Confi gur at io n. Description Enables or dis ables auto VLAN cr eation f or a speci fied switch port or a ll switch por ts on a spe cified mod ule. Wh en enabled , it allo ws the sw itch to automatic ally cre ate a VLAN each time the po rt recei v ...

  • Avaya 106760804 - page 444

    Chapt er 21 21-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port cat eg o r y Command Mode Global Conf igurati on. Descr iption Sets the categ ory of ports. Syntax set port categor y { <mod-nu m> | <mod-port- range> }[...,{ <mod -num> | <mod-port -range> }] {s ervice- port | u ...

  • Avaya 106760804 - page 445

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-13 Port set port disab le Command Mode Global Confi gur at io n. Description Disables a spe cified p ort or ports . Synt ax set por t disabl e { <mod-n um> | <mod-port- range> }[...,{ <mod- num> | <mod-port- range> }] Sample Output The following e xample disa bles all the port s on t ...

  • Avaya 106760804 - page 446

    Chapt er 21 21-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort duplex Command Mode Global Conf igurati on. Descr iption Sets the duplex ity of fa st ether net port s. Syntax set port duplex { <mod -num> | <mod- port-range> }[...,{ <mod-nu m> | <mod-port -range> }] {f ull-du ...

  • Avaya 106760804 - page 447

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-15 Port set port edg e admin st ate Command Mode Global Configur atio n. Description Specifies whe ther a por t is an ed ge port or a nonedge po rt. An edge p ort is not connect ed to any other b ridge. Only edge ports and point -to-poin t lin ks can r api dly tr ans itio n to fo rwa r din g sta te. If you ...

  • Avaya 106760804 - page 448

    Chapt er 21 21-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port ena b le Command Mode Global Conf igurati on. Descr iption Enabl es a speci fied port or ports . Syntax set port enable { <mod-nu m> | <mod-port- range> }[...,{ < mod-num> | <mod-port -range> }] Sample Output The ...

  • Avaya 106760804 - page 449

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-17 Port set port fl ow-contr ol Command Mode Global Confi gur at io n. Description Set the port flow contr ol. * Note: Setting this para meter on an y M5548-100 TX port set s all physical ports on t he module t o the same va lue. Synt ax set por t flo w-co ntrol { <mod-num> | <mod- port-range > ...

  • Avaya 106760804 - page 450

    Chapt er 21 21-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port frame- t ags Command Mode Global Conf igurati on. Descr iption Sets the switc h ports to use or ign ore fram e tags. Syntax set port fr am e-ta gs { <mod-num> | <mod-swpo rt-range> }[..., { <mod-num> | <mod-swport - ...

  • Avaya 106760804 - page 451

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-19 Port set port hunt group Command Mode Global Confi gur at io n. Description Sets or clea rs the hunt group ass ignment for a spec ified switc h port. Synt ax Sample Output The following e xample set s the hunt group assi gnment of switc h port 1 on the module i n slot 5 to hu ntgroup na med sales . (conf ...

  • Avaya 106760804 - page 452

    Chapt er 21 21-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port internal-er ror-shut down Command Mode Global Conf igurati on. Descr iption Sets switch por ts to shutdown if th eir r ate of in ternal e rrors exceed s the thres hol d se tting . T o s et the thre shol d, u se t he set-inter nal-er ror ...

  • Avaya 106760804 - page 453

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-21 Port set port in trusion-tra p Command Mode Global Confi gur at io n. Description Enables or dis ables th e switch po rt intr usion tra p. Synt ax Sample Output The following e xample enabl es the swi tch port intrusi on trap on module in slot 3. (configure)# set port int ru sio n-tr ap 3 Systems P550R, ...

  • Avaya 106760804 - page 454

    Chapt er 21 21-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port intrus io n- tra p -t ime r Command Mode Global Conf igurati on. Descr iption Sets the tim e interv al at wh ich intr usion tr aps are gen erated. Th e defau lt setti ng for the intrusi on trap timer is 1800 se conds ( 30 minutes) . The ...

  • Avaya 106760804 - page 455

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-23 Port set port kno wn-mode Command Mode Global Confi gur at io n. Description Enables or dis ables kno wn mode for th e specifi ed switch port or po rts. Synt ax Sample Output The following e xample enabl es known mode f or the se cond switc h port on the module i n slot 3 a nd switch p orts 7 thr ough 1 ...

  • Avaya 106760804 - page 456

    Chapt er 21 21-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port mirror Command Mode Global Conf igurati on. Descr iption Set up or remove a port mirr or on a swit ch in Fabr ic mode 1. Syntax T o Configure : set po rt mirror <mod-port- range> sour ce- por t <mod- port-ran ge> mirr or- po ...

  • Avaya 106760804 - page 457

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-25 Port Sample Output The following e xample set s a port mi rror sampling rule for a single source port that has 2 fab ric ports. (configure)# set port mirr or 4/1-10 sour ce-port 4/2 mirr or -port 4/3 sampling always piggy back-port 4/ 4 Port mirroring rule configured. Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 458

    Chapt er 21 21-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port mirror Fabric_mode2 Command Mode Global Conf igurati on. Descr iption Set up or remove a port mirr or on a swit ch in Fabr ic mode 2. Syntax T o Configure : set port mirror Fabr ic_mode2 so urce-port <mod-po rt- range> mirror-por ...

  • Avaya 106760804 - page 459

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-27 Port {always | disable | periodic} How often you wan t the mirror port to receive tr affic sampl es. [sa <MAC - addr ess> ] The source MAC a ddress that you wan t to mirror traf fic for . Use this opti on only if you entered sa for the direction of tra ffic. [da <MAC- addr ess> ] The destinat ...

  • Avaya 106760804 - page 460

    Chapt er 21 21-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Syst ems P580 and P882. 8-por t gigab it modu les • 1–4 •5 – 8 • Any si ngle po rt Y ou ca n mi rro r a ny fo ur sin gl e por t s simultan eously (one port per channel). However you cannot mirr or a port rang e and a single port within ...

  • Avaya 106760804 - page 461

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-29 Port set port name Command Mode Global Confi gur at io n. Description Se ts th e nam e for a port . Omi ttin g the <port-name> variab le cl ear s the po rt name. Synt ax set po rt na m e <mod-p ort-spec > [ <port-name> ] Sample Output The following e xample set s the name of the seco nd ...

  • Avaya 106760804 - page 462

    Chapt er 21 21-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port network-er ror-detection Command Mode Global Conf igurati on. Descr iption Confi gure ne twork er ror de te ction and rec overy ( NEDR) for a port or p orts. Syntax To E n a b l e : set port netw ork-err or- detecti on <mod-port-r an ...

  • Avaya 106760804 - page 463

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-31 Port Sample Output The following c ommand sets NEDR on por ts 1-5 on modu le 3. (configure)# set port networ k-err or - detection 3/1- 5 Systems P550R, P580, P880, and P882. <rising- thr eshold value> The rising threshold. The number of CRC errors that triggers NEDR to log an event in the event log ...

  • Avaya 106760804 - page 464

    Chapt er 21 21-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port p a ce -p rio rit y-mod e Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles pace priority mode on a speci fied port or ports. Syntax Sample Output The foll owing exa mple enabl es the pac e priori ty mode on al l t ...

  • Avaya 106760804 - page 465

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-33 Port set port point -to-poin t admin st atus Command Mode Global Configur atio n. Description Specifies whe ther a por t is connect ed to a sha red LAN segment or a point - to-point LAN segment. A poi nt-to-p oint LAN segmen t is conne cted to exactly one oth er bridge ( nor ma ll y wit h a di re ct cabl ...

  • Avaya 106760804 - page 466

    Chapt er 21 21-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort rate -limit -burst-s ize Command Mode Global Conf igurati on. Descr iption Sets the rate limit burst si ze for fa st ether net ports . * Note : Settin g this par ameter on a ny M5548-100TX po rt sets all physica l ports o n the modu le ...

  • Avaya 106760804 - page 467

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-35 Port set po rt rate -limit-mo de Command Mode Global Confi gur at io n. Description Se ts th e ra te lim it mo de for fast eth ern et por ts. Synt ax set po rt rat e-l im it- m ode { <mod-num> | <mod-port -range> }[...,{ <mod- num> | <mod-po rt-range> }] {d isabl e | enable | enab ...

  • Avaya 106760804 - page 468

    Chapt er 21 21-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port rate- lim it- r at e Command Mode Global Conf igurati on. Descr iption Sets the ra te limit rate for fast et hernet po rts. Syntax set po rt ra te- li mit -rat e { <mod-num> | <mod-p ort-range > }[...,{ <mod- num> | &l ...

  • Avaya 106760804 - page 469

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-37 Port set port- redundan cy Command Mode Global Configur atio n. Description Enables or dis ables al l existi ng redunda ncy pairs . Synt ax set por t-redundanc y {enable | disable } Systems P580 and P882. ...

  • Avaya 106760804 - page 470

    Chapt er 21 21-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort-redunda ncy name Command Mode Global Conf igurati on. Descr iption Creat es or del etes a por t redunda ncy pair . After creati ng a redund ancy pair , use the s et port- redund ancy command to enable por t redunda ncy global ly for al ...

  • Avaya 106760804 - page 471

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-39 Port set po rt remo te-fau lt-de tect Command Mode Global Confi gur at io n. Description Enables or dis ables re mote fault detecti ons for gi gabit por ts. Remote f ault detecti on makes it p ossible for a Gigabit port at o ne end of a l ink to signa l status t o the othe r end of t he link, even i f it ...

  • Avaya 106760804 - page 472

    Chapt er 21 21-40 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort sp anning-tr ee-mode Command Mode Global Conf igurati on. Descr iption Enable s or dis ab les spa nning tre e m od e fo r sp ec ifie d sw i tch por ts. Syntax Sample Output The foll owing exa mple enabl es the spa nning tre e mode for ...

  • Avaya 106760804 - page 473

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-41 Port set port spe ed Command Mode Global Confi gur at io n. Description Se ts th e po r t spe ed . Synt ax set po rt sp eed { <m od -nu m> | <mod-port-range> }[...,{ <mod-num> | <mod-port- range> }] {10Mbps | 100Mbps | 1Gbps} Sample Output The followi ng example set s the speed fo ...

  • Avaya 106760804 - page 474

    Chapt er 21 21-42 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port trunki ng- fo rmat Command Mode Global Conf igurati on. Descr iption Sets the trunk ing form at for swi tch port s. The defau lt sett ing is cl ear . Syntax set port trunkin g-for mat { <mod-n um> | <mod-swport -range> }[.. ...

  • Avaya 106760804 - page 475

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-43 Port set port vl an Command Mode Global Confi gur at io n. Description Sets the VLAN fo r a spec ified swi tch port or all switch p orts on a specifi ed module. Synt ax set po rt vl an { <mod-num> | <mod- swport-ra nge> }[...,{ <mod-num> | <mod-swport- range> }] <vlan-i d> S ...

  • Avaya 106760804 - page 476

    Chapt er 21 21-44 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port vlan - bi nd i ng - met h od Command Mode Global Conf igurati on. Descr iption Sets VLAN binding method for a specif ied switch port or all switch port s on a specifi ed module . Syntax set port vlan-bi nding-meth od { <mod -n um> ...

  • Avaya 106760804 - page 477

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-45 Port set port vt p-snoop in g Command Mode Global Confi gur at io n. Description Disables or e nables vt p-snooping for speci fied swit ch ports . The defaul t state is disable d. Synt ax Sample Output The following e xample enabl es the vt p-snoopin g option f or the sec ond switch por t on the modu le ...

  • Avaya 106760804 - page 478

    Chapt er 21 21-46 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port Command Mode User . Descr iption Displ ays the co nfigurat ion of spe cified sw itch ports. By default, the configur ation of all sw itch port s is dis played. Syntax show port [{ <mod-num > | <mod-swport- range> }[..., { & ...

  • Avaya 106760804 - page 479

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-47 Port show port coun ters Command Mode User . Description Displays the port stat istics on a module. If no <mod-nu m> or <mod- swport-spe c> is speci fied , the n the p ort stat isti cs for all s wit ch por ts on a ll modules are displaye d. If only a <mod-num> is spec ifie d, th en p o ...

  • Avaya 106760804 - page 480

    Chapt er 21 21-48 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port mirror Command Mode User . Descr iption Displ ays the port mir rori ng confi gurat ion for a speci fic so urce por t or ra nge or all source por ts or ran ges on a swi tch in Fabr ic mode 1. If no <mod- num> or <mod-por t-rang ...

  • Avaya 106760804 - page 481

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-49 Port show port mirr or Fabric_mod e2 Command Mode User . Description Displays the source por ts, mirror por t, dir ection bein g mirrored , MAC address f ilter , sampler t ype, and maxi mum packet per second for all por t mirrors t hat are c urrentl y set up . Synt ax sho w por t mi rror Fab r ic_m od e ...

  • Avaya 106760804 - page 482

    Chapt er 21 21-50 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port physical Command Mode User . Descr iption Displ ays the co nfigurat ion of the specifi ed physica l port or ports. Syntax show port phy sical [{ <m od- num> | <mod-port-ra nge> } [...,{ <mod-num> | <mod-port -range ...

  • Avaya 106760804 - page 483

    Docu ment N o. 10 -3 00 090 , Issu e 1 21-51 Port show port st atus Command Mode User . Description Displays port status i nformati on. The stat us informa tion of all ports is displayed by defa ult. Synt ax show port status [{ <mod -n um> | <mod-port- range> }[...,{ <mo d-num> | <mod-port- range> }] ] Sample Output The foll ...

  • Avaya 106760804 - page 484

    Chapt er 21 21-52 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port redundanc y Command Mode User . Descr iption Displ ays the gl obal port redundanc y setting , enabl ed or disable d, and the configur ed red undancy pai rs. Syntax show port- redundanc y [ <r edundant-nam e> ] Syst ems P580 and P ...

  • Avaya 106760804 - page 485

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 22-1 22 Power Cool RAM Ove rview This chapt er descri bes the f ollowing c ommands: ■ show syst em fans ■ show syst em power ■ show syst em ram ...

  • Avaya 106760804 - page 486

    Chapt er 22 22-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show s ystem fa ns Command Mode User . Descr iption Displ ays the st atus of t he cooli ng system. Syntax show syst em fans Sample Output The foll owing exa mple list s the st atus of t he switch f ans. > show syste m fans FanStatus Module Fan Pa ...

  • Avaya 106760804 - page 487

    Docu ment N o. 10 -3 00 090 , Issu e 1 22-3 Power Cool RAM show syste m power Command Mode User . Description Displays the status of the po wer suppli es instal led in t he chassi s. Synt axt show s yst em power Sample Output The following example display s the status o f the power supplies in stalled in the c has sis . > show syst em power Powe ...

  • Avaya 106760804 - page 488

    Chapt er 22 22-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show s ystem ram Command Mode User . Descr iption Displ ays the st atus of Random Acc ess Memory (RAM). Syntax show syst em ram Sample Output The foll owing exa mple displ ays the RAM status. > show syste m ram Total RAM 64.00 MBytes Operational ...

  • Avaya 106760804 - page 489

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 23-1 23 80-Series QoS Ove rview This chapt er descri bes the f ollowing c ommands: ■ acce ss-lis t ■ reset port queue counte rs ■ set aft ent ry ■ set diffse rv p lp ■ set diffse rv p riori ty ■ set po rt de fau lt -pr iori ty ■ set po rt ig n ore -t ...

  • Avaya 106760804 - page 490

    Chapt er 23 23-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 access -list Command Mode Global Conf igurati on. Descr iption Create s a rul e in a n acc ess co ntro l list (ACL ). Th e rule that y ou s e t is applied on all of the ports on the swit ch. * Note : Y ou must ena ble the ACL on which you want t o s ...

  • Avaya 106760804 - page 491

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-3 80-Series QoS permit Forwards the packet without changin g its priority . use-priori ty Assigns the priority that you define i n the following <p riority> parameter to the packet. <priority> The priority that you want to as sign to packets that match this ACL. Enter a number between 0 and 7. u ...

  • Avaya 106760804 - page 492

    Chapt er 23 23-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 <pr otocol-id> T he ID of th e pro toco l th at yo u wa nt to a ssi gn a priorit y to. RFC 791 define s the prot ocol IDs. <sour ce-ip-add r> The source IP add ress of the subnet that you want to assign a priority to. <sour ce-wildcar ...

  • Avaya 106760804 - page 493

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-5 80-Series QoS Sample Output: St andard ACL Rules The followi ng table pro vides exampl es of sta ndard ACL rules. [{lt <port> | eq <port> | gt <por t> | range <p ort> <por t> }] A destination por t or range of destination ports that pass data between t wo hosts or switches us ...

  • Avaya 106760804 - page 494

    Chapt er 23 23-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output: Extended ACL Rules The foll owing ta ble provides example s of exten ded ACL rul es. • Use the DSCP in the packet to classify all traf fic that has a source IP address of 3.3.3 .3 • Mask the three least significant bits of the DS ...

  • Avaya 106760804 - page 495

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-7 80-Series QoS • Replace the existing DSCP of packets with a DSCP of 12 for all traffi c that has a source IP add ress of 199.93. 238.83. • Mask the three least significant bits of the DSCP . (configure)# access-list MyAccessList2 4 permit remark l2 mask ip host 19 9.93.238.8 3 any Replace the existing ...

  • Avaya 106760804 - page 496

    Chapt er 23 23-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems ■ P550R and P880, 80-series modu les only . ■ P580 and P882. • Use the DSCP to classify all UDP traffic that has a: — Source IP addres s of 7.7. 7.7 — Destinati on IP addr ess of 8.8. 8.8 — Destination p ort betwee n 33 and 44 ? ...

  • Avaya 106760804 - page 497

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-9 80-Series QoS reset p ort queue counter s Command Mode User . Description Re set s th e q ueu e stat isti cs to 0 . Synt ax reset port queu e counters { <mod-num> | <mod-s wport-ran ge> }[..., { <mod-num> | <mo d-swport-r ange> }] {in gress | e gress | all} [ queue <queue> ] ...

  • Avaya 106760804 - page 498

    Chapt er 23 23-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exa mple reset s the QoS st atisti cs on the ingress po rts on the module in s lot 3. > re set port que ue counters 3 ingr ess Syst ems ■ P550R and P880, 80-series modu les only . ■ P580 and P882. ...

  • Avaya 106760804 - page 499

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-1 1 80-Series QoS set af t entry Command Mode Global Confi gur at io n. Description Configures th e priori ty of a sou rce MAC addres s or destina tion MAC address. Th e no command d eletes t he Address Forwarding T a ble (AFT) entry for the sour ce or dest ination MAC addre ss. Synt ax To Configur e: set a ...

  • Avaya 106760804 - page 500

    Chapt er 23 23-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 priority Options in clude: • normal - The AFT entr y has n ormal priority . • high - The AFT entry has high priority . sa-priority port Uses the priority of the ph ysical por t, Cis co ISL tag, or 802.1p tag to determine the layer 2 pri orit ...

  • Avaya 106760804 - page 501

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-13 80-Series QoS Sample Output The following t able pro vides examples of this c ommand. T able 2 3-6. Examples: set aft entry T o . . . Enter . . . • Associate MAC address 00:00:00: 00:00:55 with port 1 on the module in slo t 3 and with VLAN 50. • Forward frames that have a source or destinatio n MAC a ...

  • Avaya 106760804 - page 502

    Chapt er 23 23-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Syst ems ■ P550R and P880, 80-series modu les only . ■ P580 and P882. • Associate MAC address 00:00:0 0:00:0 0:55 wit h port 1 on th e module in slot 3 an d with VLAN 50. • Forward frames that have a source or destination MAC ad dress of ...

  • Avaya 106760804 - page 503

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-15 80-Series QoS set diff serv plp * Import ant: This command is for f uture func tionali ty and is not current ly suppor ted. Command Mode Global Confi gur at io n. Description Assigns a packe t loss proba bility (PLP) to a Dif f Serv code point (DSCP). Synt ax set di ffser v plp {low | hi gh} dscp <d s ...

  • Avaya 106760804 - page 504

    Chapt er 23 23-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set diff se rv pri ority Command Mode Global Conf igurati on. Descr iption Assig ns a prio rity to a Dif fServ code p oint (DSCP) in th e Dif fServ Ma pping Ta b l e . Syntax set diffs erv p rio rity <priority> dsc p <dscp- start-r ange ...

  • Avaya 106760804 - page 505

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-17 80-Series QoS set port def ault-prior ity Command Mode Global Confi gur at io n. Description Se ts th e pr io rit y of a p hys ic al p ort. Synt ax set por t defa ult- prior ity {{ <mod- num> | <mod-swport -range> }[.. ., { <mod- num> | <mod-s wport-r ange> }] | all -ports} <pr ...

  • Avaya 106760804 - page 506

    Chapt er 23 23-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 The foll owing comman d sets the priority t o 2 for por ts 1 thr ough 5 on the module in s lot 3 and f or port 1 on the modul e in slot 6. (configure)# set port default- priority 3/ 1-5,6/1 2 Syst ems ■ P550R and P880, 80-series modu les only ...

  • Avaya 106760804 - page 507

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-19 80-Series QoS set port ig nore-t ag-pr iority Command Mode Global Confi gur at io n. Description Sets a port t o ignore a ny layer 2 tag priorit y (inclu ding 802.1p t ags). The default s etting is o ff. Synt ax To E n a b l e : set port ignore-t ag-prior ity {{ <mod- num> | <mod-swport- range&g ...

  • Avaya 106760804 - page 508

    Chapt er 23 23-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing comman d sets al l ports on the module i n slot 3 to ignore the 802.1p tag priorit y (configure)# set po rt igno re- tag-prior ity 3 on The foll owing comman d sets por ts 1 thro ugh 5 on the mod ule in sl ot 3 to no ...

  • Avaya 106760804 - page 509

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-21 80-Series QoS set port mask -diffs erv Command Mode Global Confi gur at io n. Description Sets a port t o mask the t hree leas t sig nificant bits of the DSCP when th e switch is usi ng the DSCP to classify bri dged IP traff ic. If you mask the three least si gnifica nt bits o f the DSCP , the switch r e ...

  • Avaya 106760804 - page 510

    Chapt er 23 23-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing comman d sets all po rts on the module i n slot 3 to ma sk the three l east sig nific ant bits of the DSCP , enter: (configure)# set po rt mask- diffserv 3 on Syst ems ■ P550R and P880, 80-series modu les only . ? ...

  • Avaya 106760804 - page 511

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-23 80-Series QoS set port police Command Mode Global Confi gur at io n. Description Enables or dis ables pol icing fo r ingress traf fic on a port. Synt ax To C o n f i g u r e : set port police {{ < mod-num> | <mod-swp ort-range > } [..., { <mod -num> | <mod-swpor t-range> }] | al l ...

  • Avaya 106760804 - page 512

    Chapt er 23 23-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exa mple sets port poli ce on all ports on modu le 3. (configure)# set po rt police 3 all-por ts Syst ems ■ P550R and P880, 80-series modu les only . ■ P580 and P882. <rate> The maximum b its per second tha ...

  • Avaya 106760804 - page 513

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-25 80-Series QoS set port que ue service cbq Command Mode Global Confi gur at io n. Description Sets a port, p ort range , or module t o use class- based queui ng (CBQ) queue serv icin g. Synt ax set p o rt qu eue s ervi ce { { <mod-num> | <mod-swpor t-range> }[..., { <mod- num> | <mod- ...

  • Avaya 106760804 - page 514

    Chapt er 23 23-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set port queu e se rvi ce cb wf q Command Mode Global Conf igurati on. Descr iption Sets a port, por t range, o r module to u se class -based weig hted fai r queuing (CBWFQ) queu e servic ing. Syntax set port queue ser vi ce {{ <mod-num> | ...

  • Avaya 106760804 - page 515

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-27 80-Series QoS Systems ■ P5 50R and P880, 80 -series mo dules onl y . ■ P580 and P88 2. <nor mal - burst > The maximum size of burst that is guaranteed transfer . Bursts that are smaller than this si ze are guar anteed transfer . Bursts that are larger than this size are either ser viced by WFQ ...

  • Avaya 106760804 - page 516

    Chapt er 23 23-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort qu eue serv ice st rict-prior ity Command Mode Global Conf igurati on. Descr iption Sets a port, por t range, o r module to u se stri ct prior ity queue s ervicin g. Syntax set port queue ser vi ce {{ <mod-num> | <mod-swport - ...

  • Avaya 106760804 - page 517

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-29 80-Series QoS set port que ue service wfq Command Mode Global Confi gur at io n. Description Sets a port, p ort range , or module to us e weighted f air queu eing (WFQ) queue serv icing. WFQ is the def ault queu e-servic ing algor ithm. Synt ax set p o rt qu eue s ervi ce { { <mod-num> | <mod-sw ...

  • Avaya 106760804 - page 518

    Chapt er 23 23-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set p ort us e-diff serv Command Mode Global Conf igurati on. Descr iption Sets a port to classif y bridged I P traf fic by it s Dif fServ cod e point (DSCP) . Syntax To E n a b l e : set por t use-di ffser v {{ <mod-nu m> | <mod-swport ...

  • Avaya 106760804 - page 519

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-31 80-Series QoS Sample Output The following c ommand sets po rts 4 thr ough 12 on th e module in s lot 6 to classif y bridged I P traf fic by DSCP: (configure)# set port use-d iffserv 6/4 -12 on Systems ■ P5 50R and P880, 80 -series mo dules onl y . ■ P580 and P88 2. ...

  • Avaya 106760804 - page 520

    Chapt er 23 23-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show diffserv t able Command Mode User . Descr iption Displa y th e p rio rity th at i s ass igne d to each D SCP . * Note : The sh ow diff ser v tab le CLI command displa ys the packet loss probabi lity (PLP) for each DSCP . However , the sw it ...

  • Avaya 106760804 - page 521

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-33 80-Series QoS show port Command Mode User . Description Displays the QoS sett ings for a physical port. This command al so dis plays the prior ity of t he port, i f the port is set to ignore 802.1p tag pr iority , and if the port i s set to use th e DSCP for bri dged IP tr aff ic. Synt ax show port [{ &l ...

  • Avaya 106760804 - page 522

    Chapt er 23 23-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port police Command Mode User . Descr iption Displ ays the se ttings f or polic ing. Syntax show port po li ce { <mod- num> | <mod-swport- range> }[..., { <mod- num> | <mod-swp ort-range> }] Sample Output The foll ow ...

  • Avaya 106760804 - page 523

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-35 80-Series QoS show port queu e buffer Command Mode User . Description Displays the amount of memory that is assigned t o each queu e. Synt ax show port queue buf fer {{ <mod-num> | <mo d-swport-rang e >}[..., { <m od- num> | <mod-s wport-r ange> }] | all -ports} Sample Output The ...

  • Avaya 106760804 - page 524

    Chapt er 23 23-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port queue c ounters Command Mode User . Descr iption Displ ays QoS stat istics . For more in formation about the statist ics that are display ed, see Chapt er 25, “80- Series QoS,” in the Use r Guide for the A vaya P580 a nd P882 Multi ...

  • Avaya 106760804 - page 525

    Docu ment N o. 10 -3 00 090 , Issu e 1 23-37 80-Series QoS Sample Output The foll owin g ex amp le di spl ay s al l QoS sta tisti c s for the m odu l e in s lot 3 . > show port queue counter s 3 all Systems ■ P5 50R and P880, 80 -series mo dules onl y . ■ P580 and P88 2. ...

  • Avaya 106760804 - page 526

    Chapt er 23 23-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show port queue s ervice Command Mode User . Descr iption Displ ays the se ttings f or queu e servic ing. Syntax show port queue serv ice { <mod-num> | <mod-s wport-ran ge> }[..., { <mod- num> | <mod-swpor t-range> }] Sam ...

  • Avaya 106760804 - page 527

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 24-1 24 RADIUS Ove rview This chapt er descri bes the f ollowing c ommands: ■ set rad ius aut hen ti cat ion ■ set ra dius au thentic ation grou p ■ set ra dius au thentic ation rea lm ■ set ra dius au thentic ation ret ry-numb er ■ set ra dius au thenti ...

  • Avaya 106760804 - page 528

    Chapt er 24 24-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set rad i u s aut h en ti cati on Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles RADIUS clien t. Syntax Sample Output The foll owing command en ables RADIUS on t he switch : (configure)# set r adius authen tication enable Sy ...

  • Avaya 106760804 - page 529

    Docu ment N o. 10 -3 00 090 , Issu e 1 24-3 RADIUS set radiu s authen ti cation gro up Command Mode Global Configur atio n. Description Sets the gr oup to whi ch the swi tch belon gs. If a group i s set, then the group name is inc luded in Access Request mes sages that a re sent to t he RADIUS server . By default, the switch doe s not belon g to a ...

  • Avaya 106760804 - page 530

    Chapt er 24 24-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set rad ius a ut h en ti ca ti on re a lm Command Mode Global Conf igurati on. Descr iption Sets the real m of user ac counts tha t are aut horized t o log in to the swit ch. Real ms are u s ed to organ ize user acc oun t s. If a rea lm is set, @ an ...

  • Avaya 106760804 - page 531

    Docu ment N o. 10 -3 00 090 , Issu e 1 24-5 RADIUS set rad iu s authen ticati on retry -number Command Mode Global Configur atio n. Description Sets the number of ti mes the switch at t empts t o co nta ct the RADIUS s erver to authen ticate a user . The def aul t value is 1 r et ry and t he val id ra nge is 0 to 10 re trie s . Synt ax set ra d ius ...

  • Avaya 106760804 - page 532

    Chapt er 24 24-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set rad iu s auth en ti ca ti on re t ry -t ime Command Mode Global Conf igurati on. Descr iption Sets the amoun t of time i n seconds that the switch wait s before attemp ting to reau thentica te a lo gin. The default value i s 7 secon ds and the v ...

  • Avaya 106760804 - page 533

    Docu ment N o. 10 -3 00 090 , Issu e 1 24-7 RADIUS set radiu s authen ticati on server Command Mode Global Configur atio n. Description Sets either th e primary or secondar y RADIUS server setting s. Synt ax Sample Output The foll owin g co mma n d se ts th e prim ar y R AD IUS s erv er to IP add r ess 192.157.1. 0 and share d secret to secr et pri ...

  • Avaya 106760804 - page 534

    Chapt er 24 24-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set r adius authe ntication source-ip Command Mode Global Conf igurati on. Descr iption Sets the IP int erface a ddress th e switch wi ll use as the so urce IP add ress in the Access Request mess ages. This va lue must be an IP inte rface add ress o ...

  • Avaya 106760804 - page 535

    Docu ment N o. 10 -3 00 090 , Issu e 1 24-9 RADIUS set rad iu s authen ticati on switch- service -type- required Command Mode Global Configur atio n. Description If you enable switch-s ervice-t ype-requ ired, the switch re cognize s only Access Accep t messages that have the corre ct group n ame included. Thi s sett ing preve nts the s w itc h f ro ...

  • Avaya 106760804 - page 536

    Chapt er 24 24-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set r adius authe ntication ud p-port Command Mode Global Conf igurati on. Descr iption Sets the UDP port numbe r used for RADI US dekagrams. The default i s port 1812 with t he only opt ions being 18 12 or 1645. Thi s must match th e UDP port n ...

  • Avaya 106760804 - page 537

    Docu ment N o. 10 -3 00 090 , Issu e 1 24-1 1 RADIUS show radius authenti cation Command Mode User . Description Displays the current RADI US configura tion. All parameters a re displa yed with the e xception o f the shar ed secret s. Synt ax show rad ius authe nticati on Sample Output The following c ommand displa ys the cur rent RADIUS sett ings: ...

  • Avaya 106760804 - page 538

    Chapt er 24 24-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 539

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 25-1 25 SNMP Ove rview This chapt er descri bes the f ollowing comma nds: ■ snmp -serv er ■ snmp -s erv er a tm -c om mu nity ■ snmp -s erv er c om mu nity ■ snmp -s erv er c ontac t ■ snmp -s erv er e ngi ne id ■ snmp-ser ver group ■ snmp -s erv er ...

  • Avaya 106760804 - page 540

    Chapt er 25 25-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 snmp-ser ver Command Mode Global Conf igurati on. Descr iption Enabl es or dis ables the three ve rsions of SNMP: SNMPv1, v2, and v3 . This command ov errides secure mode, which disab les SNMPv1 a nd v2 and enables SNMPv3. For i nformation on secure ...

  • Avaya 106760804 - page 541

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-3 SNMP snmp-ser ver atm-co mmunity Command Mode Global Configur atio n. Description Creates or modi fies a co mmunity st ring to access th e A TM Uplink module. The no command deletes the communit y string. Synt ax ] Systems P580 and P882. To C o n f i g u r e : snmp-ser ver atm-co mmunity <c ommunity-st ...

  • Avaya 106760804 - page 542

    Chapt er 25 25-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 snmp-ser ver c ommunity Command Mode Global Conf igurati on. Descr iption Creat es or mod ifies a communi ty stri ng to acces s the swit ch. The no command de letes t he communit y string . Syntax Syst ems P580 and P882. T o Configure : sn m p- se r ...

  • Avaya 106760804 - page 543

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-5 SNMP snmp-ser ve r cont act Command Mode Global Configur atio n. Description Se ts th e adm in i s trat ive conta ct fo r th e s wit ch. T he s w itc h disp lay s the administr ative con tact when y ou enter t he show sn mp command. The defa ult sett ing is Sys tem A dmi nist rat or . The no command resto ...

  • Avaya 106760804 - page 544

    Chapt er 25 25-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 snmp-ser ver e ngineid Command Mode Global Conf igurati on. Descr iption Changes the en gine ID of the switch . The default engine ID is based on the IP addre ss of the s witch. After ch anging the engine ID, y ou must chang e all SNMPv3 use r passw ...

  • Avaya 106760804 - page 545

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-7 SNMP CAUTION: snmp-serve r group Command Mode Global Configur atio n. Description Creates or modi fies a gr oup. The no command deletes a specifi c group or all grou ps of a spe cific group name (if multi ple groups hav e the same group name). If multi ple groups have the same gr oup name, you must ente r ...

  • Avaya 106760804 - page 546

    Chapt er 25 25-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems P580 and P882. <r eadview> The MIB vie w to which you want the g roup to have read access. <writeview> The MIB view to which you want the grou p to have write access. <notifyview> The MIB view for which y ou want the gr ou ...

  • Avaya 106760804 - page 547

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-9 SNMP snmp-ser ver locat ion Command Mode Global Configur atio n. Description Sets the physi cal loca tion of t he switch. The swit ch displa ys the phys ical location of the swi tch when you e nter the show snmp command. The no command clear s the loc ation. Synt ax Systems P580 and P882. To C o n f i g u ...

  • Avaya 106760804 - page 548

    Chapt er 25 25-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 snmp-ser ver no tify Command Mode Global Conf igurati on. Descr iption Sets the trap receiver for a community st ring. The no command cle ar s the trap re ceiver Syntax Syst ems P580 and P882. T o Configure : snmp-ser ver noti fy <ip-add r> ...

  • Avaya 106760804 - page 549

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-1 1 SNMP snmp-ser ve r p assword Command Mode Global Configur atio n. Description Ch an ges a us er pas swo rd. Y o u mu st cha nge use r pa sswo rds whe n the engine ID c hanges. The switch p rompts you t o enter t he new passwor d or passwo rds. The passwords a re case- sensitive a nd can range from 8 to ...

  • Avaya 106760804 - page 550

    Chapt er 25 25-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 snmp-ser ver us er Command Mode Global Conf igurati on. Descr iption Creat es or modif ies an SNMPv3 us er . The no comman d deletes an SNMPv3 user . Syntax T o Configure : snmp-serve r user <userna me> [group <g r oupname> ] [ [loca ...

  • Avaya 106760804 - page 551

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-13 SNMP Systems P580 and P882. <auth- passwor d> The authentication passwor d for the user: • T ext passwords can range from 8 to 64 characters . • Localiz e d HMA C-SHA-h ashed password s m ust be 20 byte s. • Localized HMAC-MD5-hashed p asswords must be 16 byte s. Enter all localized passwo rd ...

  • Avaya 106760804 - page 552

    Chapt er 25 25-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 snmp-ser ver v iew Command Mode Global Conf igurati on. Descr iption Creat e s or mo di fies a M I B vie w . Th e no command de letes a v iew or removes an OID from a view . Syntax Syst ems P580 and P882. T o Configure : snmp-serve r view <v ...

  • Avaya 106760804 - page 553

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-15 SNMP show snmp Command Mode Global Configur atio n. Description Displays the status of SNMP (enabled or disabl ed) and th e administ rative contact a nd physica l locati on of the s witch, if set. Synt ax show snmp Sample Output SNMP engine is enabled Contact Information: System Administrator Location In ...

  • Avaya 106760804 - page 554

    Chapt er 25 25-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show snmp community Command Mode Privil eged. Descr iption Displ ays the cu rrently configure d communit y string s. Syntax show snmp communi ty [ <communi ty-stri ng> ] Sample Output Syst ems P580 and P882. T able 25-1 1. Parameters , Key ...

  • Avaya 106760804 - page 555

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-17 SNMP show snmp engineid Command Mode Global Configur atio n. Description Displays the currentl y configur ed engine ID of the s witch. Synt ax show snmp e ngineid Sample Output Engine ID: 00:00:1a:e9:01:0a:14:01:11:00:00: 00 Systems P580 and P882. ...

  • Avaya 106760804 - page 556

    Chapt er 25 25-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show snmp group Command Mode Privil eged. Descr iption Displ ays the cu rrently configure d groups. Syntax show snmp gro up [ <gr oupname> ] Sample Output Syst ems P580 and P882. T able 25-12. Parameters, Keywords, Arguments Parameter Def ...

  • Avaya 106760804 - page 557

    Docu ment N o. 10 -3 00 090 , Issu e 1 25-19 SNMP show snmp user Command Mode Priv ile ged. Description Displays the currentl y configur ed SNMPv3 use rs. Synt ax show snmp us er [ <user name> ] Sample Output Systems P580 and P882. T able 25-13. Parameters, Keywords, Argument s Parameter Defi nition <user na me> The us er for whic h you ...

  • Avaya 106760804 - page 558

    Chapt er 25 25-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show s nmp view Command Mode Privil eged. Descr iption Displ ays the cu rrently configure d views. Syntax show snmp vie w [ <viewname> ]] Sample Output Syst ems P580 and P882. T able 25-14. Parameters, Keywords, Arguments Parameter Def ini ...

  • Avaya 106760804 - page 559

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 26-1 26 SSH Ove rview Thi s chap ter d e scr ibes th e fo ll ow in g S ec ure Shell (SSH ) co m man ds: ■ clear s sh ■ ip ssh ■ ssh ■ ssh keygen ■ ssh timeout ■ show ssh ...

  • Avaya 106760804 - page 560

    Chapt er 26 26-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear s sh Command Mode Global Conf igurati on. Descr iption Ends an SSH session. Syntax clear s sh <sessi on-id> Syst ems P580 and P882 T able 26-1. Keywords, Arguments, and Options Key wor d, A rgu me n t or Option Defi nition <sessi on-i ...

  • Avaya 106760804 - page 561

    Docu ment N o. 10 -3 00 090 , Issu e 1 26-3 SSH ip ssh Command Mode Global Configur atio n. Description Enables or dis ables SSH and ch anges the p ort number f or SSH. Synt ax Systems P580 and P882. To E n a b l e : ip ssh {port [ <tcp-new-por t> ] [e nable] | [enable] } To D i s a b l e : no ip ssh T able 26 -2. Keywords, Ar guments, and Op ...

  • Avaya 106760804 - page 562

    Chapt er 26 26-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ssh Command Mode Global Conf igurati on. Descr iption Estab lishes a n SSH connecti on to a re mote host. Syntax ssh [ci pher {3des- cbc | blo wfish-cbc }] [port <tcp-p ort> ] [user <username> ] { <ip-addr> | <hostn ame> } Sy ...

  • Avaya 106760804 - page 563

    Docu ment N o. 10 -3 00 090 , Issu e 1 26-5 SSH ssh keygen Command Mode Global Confi gur at io n. Description Ge ne ra tes a n SSH serv er k ey . * Import ant: If SSH is enab led an d you re gene rate th e SS H ser ver ke y , you must dis able and the n reenable SSH f or the ch ange to take ef fect. T o disable and reenable SSH, use the ip ssh comm ...

  • Avaya 106760804 - page 564

    Chapt er 26 26-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ssh timeout Command Mode Global Conf igurati on. Descr iption Sets the number of seconds a t which an i dle conne ction is disconnect ed, or restor es the defaul t set ti ng of 600 seconds. Syntax ssh ti me out [ <seconds> ] Syst ems P580 and ...

  • Avaya 106760804 - page 565

    Docu ment N o. 10 -3 00 090 , Issu e 1 26-7 SSH show ssh Command Mode User Description Displays the SSH configur ation, SSH se rver key , or curr ent sessi ons. Synt ax show ssh {config | public-ke y | sessi ons} Sample Output Sample outpu t of the s how ssh sessi ons comm and i s as f o llows : T able 26 -6. Keywords, Ar guments, and Options Keywo ...

  • Avaya 106760804 - page 566

    Chapt er 26 26-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample output of the s h ow ss h co nfi g com m an d is as foll o ws: Syst ems P580 and P882. SSH Server Configuration --------------------------- State: Enabled Max Sessions: 7 Timeout: 600 TCP Port: 22 Retry Count: 3 Ciphers: 3des-cbc,blowfish- cb ...

  • Avaya 106760804 - page 567

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 27-1 27 SSL Ove rview Thi s cha p ter d e scr ibes the fo llo wing Sec u re S oc ket Laye r (S SL ) commands: ■ ip http s ■ show ssl ce rt ■ show ss l ce rtre q ■ show ssl ciphers ■ show ssl config ■ ssl ba ckc ert ■ ssl ce rtreq ■ ssl res tar t ? ...

  • Avaya 106760804 - page 568

    Chapt er 27 27-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip http s Command Mode Global Conf igurati on. Descr iption Enabl es or disable s SSL/HTTPS. Syntax Syst ems P580 and P882. To E n a b l e : ip https { port [ <tcp-new -port> ] [ enable] | [enabl e]} To D i s a b l e : no ip https T able 27-1. ...

  • Avaya 106760804 - page 569

    Docu ment N o. 10 -3 00 090 , Issu e 1 27-3 SSL show ssl ce rt Command Mode User . Description Displays the current SS L serve r certifi cate. Synt ax show ssl cert Sample Output Certificate: Data: Version: 3 (0x2) Serial Number: 1057592590 (0x3f09950e) Signature Algorithm: md5WithRSAEncryption Issuer: C=US, ST=Massachusetts, L=Concord, O=Avaya Inc ...

  • Avaya 106760804 - page 570

    Chapt er 27 27-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 12:8a:ea:19:32:94:d0:d5:1b Exponent: 65537 (0x10001) Signature Algorithm: md5WithRSAEncryption 5d:3b:05:57:0d:80:13:8c:45:78:b0:8c:01:ff:91:63:83:40: 81:7f:be:88:4c:6d:27:a9:44:ed:4b:0c:f5:2c:06:0e:7f:b5: 36:ef:e2:bd:b7:41:01:59:c8:26:f9:c6:fa:86:bd ...

  • Avaya 106760804 - page 571

    Docu ment N o. 10 -3 00 090 , Issu e 1 27-5 SSL show ssl ce rtreq Command Mode User . Description Di spl ays th e cu rre nt cert ific ate signi ng r equ es t (C SR). Synt ax show ssl certre q Sample Output Certificate Request: Data: Version: 0 (0x0) Subject: C=us, ST=ma, L=concord, O=avaya, OU=ccig, CN=ccig/Email=techpubs@avaya.com Subject Public K ...

  • Avaya 106760804 - page 572

    Chapt er 27 27-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 91:b8:f3:79:74:89:c3:d6:25:b9:71:10:26:ff:f4:60:6e:c0: b0:a0:a9:b1:96:7a:92:5a:89:a9:64:77:c1:65:66:cf:53:ac: fd:c1:6b:80:fb:ed:f7:fa:53:ef:fe:f2:e1:e9:59:73:fa:09: 70:85:ff:c0:74:51:92:55:ff:f8:45:6e:28:ed:3d:8d:db:be: 07:50:53:80:87:b1:c2:bf:51:b5 ...

  • Avaya 106760804 - page 573

    Docu ment N o. 10 -3 00 090 , Issu e 1 27-7 SSL show ssl ci phers Command Mode User . Description Displays the supported SSL ciphers. The P580 a nd P882 Multi service switches s upport th e foll owing ciphe r suite s: ■ SSLv3 ciph er suite s: — SSL_RSA_WITH_DES_CBC_SHA — SSL_RSA_WITH_3DES_EDE_CBC_SHA ■ TLSv 1 cip her su ites — TLS_RSA_WIT ...

  • Avaya 106760804 - page 574

    Chapt er 27 27-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show ssl conf ig Command Mode User . Descr iption Displ ays the cu rrent SSL c onfigurat ion. The followin g informat ion is display ed: ■ V ersion o f SSL and TLS ■ TCP Port ■ St at e o f S SL Syntax show ssl c onfig Sample Output Syst ems P5 ...

  • Avaya 106760804 - page 575

    Docu ment N o. 10 -3 00 090 , Issu e 1 27-9 SSL ssl backc ert Command Mode Global Configur atio n. Description Reverts to a b ackup vers ion of the SSL serv er certi ficate. If you rev ert to a backup cer tificat e, the cur rent cer tifica te is re named and made t he backup for late r reus e. Synt ax ssl ba ckcert Systems P580 and P882. ...

  • Avaya 106760804 - page 576

    Chapt er 27 27-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ssl certreq Command Mode Global Conf igurati on. Descr iption Creat es a publi c-priva te key pai r and a cer tifica te signi ng request (CSR). Y o u n eed the fo llo wing info r ma tion to cre ate th e CS R : ■ T wo-digit c ountry code ■ S ...

  • Avaya 106760804 - page 577

    Docu ment N o. 10 -3 00 090 , Issu e 1 27-1 1 SSL ssl rest art Command Mode Global Confi gur at io n. Description Restarts SSL. Y ou must resta rt SSL aft er updati ng the SSL ser ver cert ificat e info rmat ion . Synt ax ssl r estart Systems P580 and P882. ...

  • Avaya 106760804 - page 578

    Chapt er 27 27-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ssl self ce rt Command Mode Global Conf igurati on. Descr iption Self -signs a c ertifi cate sig ning reque st (CSR). After se lf-sig ning a CSR, y ou must restar t SSL fo r the cer tificate to tak e ef fect. For informa tion on how to r estart ...

  • Avaya 106760804 - page 579

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 28-1 28 Rapid S p anning T ree Protocol Ove rview This chapt er descri bes the f ollowing c ommands: ■ set por t edge admi n state ■ set por t point- to-point admin stat us ■ set por t span ning-tre e-mode ■ set por t span tree for ce-proto col-migra tion ...

  • Avaya 106760804 - page 580

    Chapt er 28 28-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set port e dge ad min st ate Command Mode Global Conf igurati on. Descr iption Speci fies whet her a port is an edge port or a nonedge por t. An edge por t is not conne cted to an y other br idge. Only e dge ports a nd poin t-to-poi nt links can rap ...

  • Avaya 106760804 - page 581

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-3 Rapid Spa nning T ree Protoco l set port point -to-poin t admin st atus Command Mode Global Configur atio n. Description Specifies whe ther a por t is connect ed to a sha red LAN segment or a point - to-point LAN segment. A poi nt-to-p oint LAN segmen t is conne cted to exactly one oth er bridge ( nor ma ...

  • Avaya 106760804 - page 582

    Chapt er 28 28-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set p ort sp anning-tr ee-mode Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles Spanni ng T ree on a port. Syntax Syst ems P550R, P580, P880, an d P882. To E n a b l e : se t port spa nning-tr ee-mode { <mod- num> | < ...

  • Avaya 106760804 - page 583

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-5 Rapid Spa nning T ree Protoco l set port sp antree force- protocol-migra tion Command Mode Global Confi gur at io n. Description Forces a brid ge port to send out RSTP BP DUs. By forc ing a b ridge port t o send RSTP BPDUs, you can determi ne whether legacy 802. 1D bridges a re present o n a LAN segment. ...

  • Avaya 106760804 - page 584

    Chapt er 28 28-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems P580 and P882. <vlan- id> The VLAN I D of the brid ge in which the bridge port is participatin g. Use the vlan <vlan-id> keyword and variabl e when the switch is running per -VLAN or dual-l ayer Spanning T ree. For a detai led d ...

  • Avaya 106760804 - page 585

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-7 Rapid Spa nning T ree Protoco l set port sp antree priori ty Command Mode Global Confi gur at io n. Description Sets the prior ity of a bridg e port. A highe r prio rity p ort (ha s a lower prior ity number) is more l ikel y to b e chos en as the pr imary path i n the sp anning tree whe n th er e ar e tw ...

  • Avaya 106760804 - page 586

    Chapt er 28 28-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Syst ems P580 and P882. <vlan- id> The VLAN I D of the brid ge in which the bridge port is participatin g. Use the vlan <vlan-id> keyword and variabl e when the switch is running per -VLAN or dual-l ayer Spanning T ree. For a detai led d ...

  • Avaya 106760804 - page 587

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-9 Rapid Spa nning T ree Protoco l set sp antree Command Mode Global Confi gur at io n. Description Enable or disa ble individ ual spanni ng tree br idges. The default s tate is enabled. Synt ax To E n a b l e : set spant ree e nab l e {8 0 2.1D | vla n { <v lan- id> | name <vl an- name > }} To D ...

  • Avaya 106760804 - page 588

    Chapt er 28 28-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exam ple disab les spanni ng tree 8 02.1D protoco l on a bridge: (configure)# set s pantr ee disa ble 802.1D Bridge successfully disabled Syst ems P550R, P580, P880,and P882. ...

  • Avaya 106760804 - page 589

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-1 1 Rapid Spa nning T ree Protoco l set sp antree confi g Command Mode Global Confi gur at io n. Description Sets the Spanni ng T ree Protocol co nfiguration . The def ault setti ng is per - VLAN. Synt ax set sp antree co nfig {iee e | per -vlan | dual-l ayer | di sable} Sample Output The following e xample ...

  • Avaya 106760804 - page 590

    Chapt er 28 28-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set sp antre e de fa u lt -p ath - co s t Command Mode Global Conf igurati on. Descr iption Sets the type o f default path cost s that po rts in a specific bridge wi ll use. Options a re: ■ common-spanning -tr ee —uses t he 16-bit default pa ...

  • Avaya 106760804 - page 591

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-13 Rapid Spa nning T ree Protoco l Systems P580 and P882. 802.1D Use this keyword if the switch is run ning IEEE 802.1D Spanning T ree. For a detailed description of IEEE 8 02.1D Spanning T ree, see Chap ter 7, “Con figuring Rapid Spanning T ree,” in User Guide for the A vaya P580 and P882 Multiservice ...

  • Avaya 106760804 - page 592

    Chapt er 28 28-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set s p antree fwddel ay Command Mode Global Conf igurati on. Descr iption Sets the Spanni ng T ree forward de lay time f or a bridg e. The fo rward dela y time is t he time a port take s to change to the fo rwarding s tate. The d efault time is ...

  • Avaya 106760804 - page 593

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-15 Rapid Spa nning T ree Protoco l Sample Output The following e xample set s the span ning tree forward de lay to 12 seconds. (configure)# set spantr ee fwddela y 12 802.1 D Bridge Forward Delay Time Successfully set t o 12 Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 594

    Chapt er 28 28-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set sp antre e he ll o Command Mode Global Conf igurati on. Descr iption Sets the spanni ng tree brid ge hello t ime. The bridge hello ti me is the time between ge neration of BPDUs by the root bri dge.The defa ult time i s 2 second s. Syntax se ...

  • Avaya 106760804 - page 595

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-17 Rapid Spa nning T ree Protoco l set sp antree hold-cou nt Command Mode Global Confi gur at io n. Description Se ts th e hol d co unt fo r a b r i dge . The hold count is the maxi mum number of BPDUs that a re sent out a por t in a hel lo ti me in terv a l. Du rin g any one he llo time i nte rval , no m o ...

  • Avaya 106760804 - page 596

    Chapt er 28 28-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set s p antree ma xage Command Mode Global Conf igurati on. Descr iption Sets the maximum amount of time t hat the br idge retai ns bridgi ng inform atio n. When the m aximu m age expire s, the br idge assum es it has l ost connecti on to the ne ...

  • Avaya 106760804 - page 597

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-19 Rapid Spa nning T ree Protoco l Sample Output The following e xample set s the span ning tree maximum age to 25 second s. (configure)# set spantr ee maxage 25 802.1D Bridge MaxAge Successfully set to 25 Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 598

    Chapt er 28 28-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set s p antree p ortcost Command Mode Global Conf igurati on. Descr iption Sets the path c ost for t his port . The ports that you pr efer be u sed by the spanning tree shou ld have the lowest pa th cost. If the s witch is runnin g common Spann ...

  • Avaya 106760804 - page 599

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-21 Rapid Spa nning T ree Protoco l Synt ax set sp antree po rtcost <mod-swport -range> [..., <mod-swport -range> ] <port-cos t-value> {802.1D | vlan { <vlan -id> | name <vlan-name > }} T able 28-13. Parameters, Keywords, Argument s Name Definition <mo d-swp ort- range> Th ...

  • Avaya 106760804 - page 600

    Chapt er 28 28-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Sample Output The foll owing exa mple sets the path c ost fo r the bri dge. (configure)# set s pantr ee port cost 5/1 15 802 .1D Port 5/1 path cost successfully set to 15. Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 601

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-23 Rapid Spa nning T ree Protoco l set sp antree priorit y Command Mode Global Confi gur at io n. Description Se ts th e br id ge prio ri ty f or a p a rtic ula r bri dge. Ent er the prio r it y a s hexidecima l value. The valid r ange for t his fie ld is 0x00 00 (0) to 0 xF000 (61,440) in increment s of 0x ...

  • Avaya 106760804 - page 602

    Chapt er 28 28-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 Syst ems P550R, P580, P880, an d P882. <vlan- id> The VLAN ID of the bri dge. Use the vlan <vlan- id > keyword and vari able when the switch i s running p er-V LAN or dual- layer Span ning T ree. Fo r a detailed des cription of per-V ...

  • Avaya 106760804 - page 603

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-25 Rapid Spa nning T ree Protoco l set sp antree versi o n Command Mode Global Confi gur at io n. Description Sets the vers ion of spa nning tree t hat you want the switc h to run. Synt ax set sp antree ve rsion {common- spanning- tree | r apid-spa nning-tree} Systems P580 and P882. T able 28-15. Parameters ...

  • Avaya 106760804 - page 604

    Chapt er 28 28-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show s p antree Command Mode User . Descr iption Displ ays infor mation about one or all spa nning tree s. Syntax show spant ree {all| 802.1D | vlan { <vlan-id> | name <vlan -na me > }} T able 28-16. Parameters, Keywords, Arguments N ...

  • Avaya 106760804 - page 605

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-27 Rapid Spa nning T ree Protoco l Sample Output The following e xample shows all of t he spanning tree bri dges that are configure d on the swi tch: > show spant ree all Systems P550R, P580, P880, and P882. Name/Vlan --------- Status ------- Bridge ID ------------------ Root Port ------ Root Cost ---- D ...

  • Avaya 106760804 - page 606

    Chapt er 28 28-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show s p antree b locked Command Mode User . Descr iption Displ ays, by VLAN, the por ts that a re currentl y in the Bloc king stat e. Syntax show spant ree blocked Sample Output Syst ems P580 and P882. Mod/Port -------- PortId ------- Priority ...

  • Avaya 106760804 - page 607

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-29 Rapid Spa nning T ree Protoco l show sp antree config Command Mode User . Description Displays the current g lobal spanning tree confi guration . Synt ax show span tree conf ig Sample Output The following e xample disp lays the spanning t ree confi guration on the switch. > show spant ree config Spann ...

  • Avaya 106760804 - page 608

    Chapt er 28 28-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show s p antree p ort Command Mode User . Descr iption Show s the port attrib utes for all brid ge port s in a par ticular br idge. Syntax show spant ree port {802.1 D | vlan { <v lan-id> | name <vlan- name> }} T able 28-17. Paramete ...

  • Avaya 106760804 - page 609

    Docu ment N o. 10 -3 00 090 , Issu e 1 28-31 Rapid Spa nning T ree Protoco l Sample Output The following e xample d isplays t he port a ttributes for th e bridge p orts on the VLAN confi gured for 802.1D. > show spant ree port vlan 80 2.1D Systems P550R, P580, P880, and P882. Name/Vlan ---------- Status ------- Bridge ID ---------- Root Port --- ...

  • Avaya 106760804 - page 610

    Chapt er 28 28-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show sp antre e versi on Command Mode User . Descr iption Displ ays the ve rsion of S panning T ree that t he switch i s running : either common Span ning T ree or Rapid Spanning T ree Protoc ol (RSTP). Syntax show spant ree version Sample Outpu ...

  • Avaya 106760804 - page 611

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 29-1 29 Switch Fabric Ove rview This chapt er descri bes the f ollowing c ommands: ■ set fa bric conf igure-r edundant-h ardware ■ set fa bric enab le-redund ant-ele ment ■ set fab ric toggl e-a ctiv e-c o ntro lle r ■ show fabr ic stat us ...

  • Avaya 106760804 - page 612

    Chapt er 29 29-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set f abric c onfigure- redundant -hardware Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles redu ndant (swi tch fabri c) hardwa re. The defa ult set ting is disa bled. This command does no t have re verse mapping. It i s not ...

  • Avaya 106760804 - page 613

    Docu ment N o. 10 -3 00 090 , Issu e 1 29-3 Switch Fa bric set fabric en able-redunda nt-element Command Mode Global Configur atio n. Description Sets the enabl ed redunda nt element. This comma nd does not have rev erse mappi ng. It is not save d to the runn ing or start up configu ration fil e. The confi guratio n is both us er and run -time mod ...

  • Avaya 106760804 - page 614

    Chapt er 29 29-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set f abric t oggle-a ctive-cont roller Command Mode Global Conf igurati on. Descr iption T oggles the acti ve control ler b etween the current active co ntrolle r and the (standb y) redunda nt control ler . This command does no t have re verse mapp ...

  • Avaya 106760804 - page 615

    Docu ment N o. 10 -3 00 090 , Issu e 1 29-5 Switch Fa bric show fabric s t at us Command Mode User . Description Displays the switch fab ri c stat us . Synt ax show fab ri c status Sample Output The following e xample disp lays the fabric s tatus. > show fabr ic status Component State Switch Controller: # 0 Active Redundant Controller: Available ...

  • Avaya 106760804 - page 616

    Chapt er 29 29-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ...

  • Avaya 106760804 - page 617

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 30-1 30 System Ove rview This chapt er descri bes the f ollowing c ommands: ■ boot sys tem fl ash ■ calen dar set ■ clear utiliza tion high -thresho ld ■ clear u til izat ion m oni to rin g ■ clear u til izat ion th res hold- eve nt ■ cloc k set ■ cl ...

  • Avaya 106760804 - page 618

    Chapt er 30 30-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ copy tftp ■ copy tftp boot flas h ■ copy tftp fla sh ■ copy tftp pcm cia ■ copy tft p running- config ■ copy tft p startu p-config ■ cpu_redund ancy con sole ■ cpu_redund ancy hel lo-int erval ■ cpu-redu ndancy mac-pr efix ■ cp ...

  • Avaya 106760804 - page 619

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-3 System ■ set ut ilizati on monit oring ■ set ut ilizati on thres hold-e vent ■ setup ■ show boot ■ show cale ndar ■ show cloc k ■ show cpu ■ show cpu_r edundancy ■ show file_n ame ■ show flash ■ show runni ng-config ■ show secu re-mode ■ show sntp ■ show sta rtup-config ■ sho ...

  • Avaya 106760804 - page 620

    Chapt er 30 30-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 boot s ystem flash Command Mode Global Conf igurati on. Descr iption Specif ies which sys t em i mage the switc h lo ads at sta rtup . Co nfig u res the image to b oot from the FEPROM. The no form of this comman d restore s the d efault s ystem flas ...

  • Avaya 106760804 - page 621

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-5 System calenda r set Command Mode Priv ile ged. Description Sets the syst em calenda r . Synt ax calend ar set <time> { <da te> <month> | <mo nth> <dat e> } <year> Sample Output The foll owin g co m man d se ts the cale nd er date . (configure)# cal endar set 14 :08:00 ...

  • Avaya 106760804 - page 622

    Chapt er 30 30-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear utilizat ion high-thre shold Command Mode Global Conf igurati on. Descr iption Reset s t he high uti l iza ti on thresh old to it s de fault se tting of 95 pe rc ent. Y ou can rese t the hig h utiliz ation thr eshold f or the CPU, fo rwarding ...

  • Avaya 106760804 - page 623

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-7 System clear utilization monito ring Command Mode Global Configur atio n. Description Disables uti lization moni toring f or the CPU or forwardi ng engines. The default s etting f or util ization monitoring is dis abled. Synt ax clear utiliz ation monit oring {cpu | for warding-e ngine} Systems P580 and P ...

  • Avaya 106760804 - page 624

    Chapt er 30 30-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear utilizat ion threshold- ev ent Command Mode Global Conf igurati on. Descr iption Disab les event logging for ut ilizati on monitor ing of the CPU or forwardi ng engi nes . Wh en eve nt l oggin g is enab led, t he s wit ch gen era tes an eve nt ...

  • Avaya 106760804 - page 625

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-9 System clock set Command Mode Priv ile ged. Description Sets the system cl ock. Synt ax clock s et <t ime> { <date> <mont h> | <month> <date> } <year> Sample Output The following c ommand sets the c lock to 2:08 p .m. (14:08 :00) on Oct ober 5, 2003. (configure)# clo ck ...

  • Avaya 106760804 - page 626

    Chapt er 30 30-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 clock summer-time recurring Command Mode Global Conf igurati on. Descr iption Confi gures the switch to automatica lly chang e to summer t ime hours (U. S. Daylight Savings T ime). The command f ormat allows f or an annual configur ation an d a ...

  • Avaya 106760804 - page 627

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-1 1 System clock timezone Command Mode Priv ile ged. Description Se ts th e tim e z on e. Synt ax clock t imezone { <zone-name > | <hours> [ <minutes> ]} Sample Output The foll owin g co m man d se t the ti me zone to C en tra l Standa rd ti me. # clock t imezone cst Systems P550R, P580, P ...

  • Avaya 106760804 - page 628

    Chapt er 30 30-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy Command Mode Privil eged. Descr iption Copy a s pecifie d file i n NVRAM to another specifie d file in NVRAM. Syntax copy <sour ce filename> <de st file name> Sample Output The foll owing exa mple show s the copy <source file ...

  • Avaya 106760804 - page 629

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-13 System copy <filena me> running-config Command Mode Global Confi gur at io n. Description Executes the spec ified file in NVRAM. The ru nning (curr ent) configur ation displays as a mer ge of the exe cut ed file and the e xis ti ng config urati on, wi th the execut ed file takin g precedenc e. Synt ...

  • Avaya 106760804 - page 630

    Chapt er 30 30-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy <filename> st artup-c onfig Command Mode Privil eged. Descr iption Copies the sp ecified file lo cated in NVRAM to the star tup (bootu p) configur ation. Syntax copy <fi lename> startup -co nfig Sample Output The foll owing exa ...

  • Avaya 106760804 - page 631

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-15 System copy <f ilename _opt_p ath> tft p Command Mode Priv ile ged. Description Uploads a speci fied fi le in NVRAM to a s pecif ied TFTP serv er . Synt ax copy <filename _opt_path> tf tp <ip-addr> Sample Output The following e xample shows the copy <filen ame_opt_path > tftp < ...

  • Avaya 106760804 - page 632

    Chapt er 30 30-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy c ard-image boot flash Command Mode Privil eged. Descr iption Copies card FLAS H images to a nd from the PCMCI A flash car d. Syntax copy card -image boot flash {boo t | cardb oot} {boo t | cardb oot} Sample Output The foll owing exa mple c ...

  • Avaya 106760804 - page 633

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-17 System copy card-i mage flas h Command Mode Global Confi gur at io n. Description Copies card FLASH images to and from the PCMCIA flas h card. Synt ax copy car d-image f lash {app1 | a pp2 | card app1 | c ardapp2} {ap p1 | app2 | cardapp1 | cardapp2} Sample Output The following e xample copi es the fl as ...

  • Avaya 106760804 - page 634

    Chapt er 30 30-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy <filename1> pcm cia <file name2> Command Mode Global Conf igurati on. Descr iption Copies a file <fi lename1> fr om the /NVRAM file s ystem to th e /pcmcia file sy ste m <filename 2> . Syntax copy <fi lename1> ...

  • Avaya 106760804 - page 635

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-19 System copy pcmcia <filename1 > <filename 2> Command Mode Global Confi gur at io n. Description Copies a file <f ilename1> from the /pc mcia file system to the NVRAM file syst em <file name2> . Synt ax copy pcmci a <file name1> <fil ename2> Sample Output The following ...

  • Avaya 106760804 - page 636

    Chapt er 30 30-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy ru nning-config Command Mode Privil eged. Descr iption Saves the runni ng configur ation to a file i n NVRAM. Syntax copy runni ng-confi g <filen ame> Sample Output The foll owing exa mple show s the copy r unning-confi g comm and . # ...

  • Avaya 106760804 - page 637

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-21 System copy runnin g-config st artup-con fig Command Mode Priv ile ged. Description Saves the runn ing (curr ent) conf igurati on as the s tartup ( bootup) configura tion in NVRAM. Synt ax copy run ning-conf ig st artup-con fig Sample Output The following e xample shows the cop y running- config st artup ...

  • Avaya 106760804 - page 638

    Chapt er 30 30-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy ru nning-config t f tp Command Mode Privil eged. Descr iption Uploa ds t he ru nni ng (curre nt) con figu rati on to t he sp ecif ied file nam e on the specifi ed TFTP serv er . Syntax copy runni ng-confi g tftp <fil ename_op t_path > ...

  • Avaya 106760804 - page 639

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-23 System copy st artup-conf ig Command Mode Priv ile ged. Description Copy the start up (bootup ) configu ration to th e specif ied file in NVRAM. Synt ax copy st artup-co nfig <f ilename> Sample Output The following e xample shows the copy st artup-c onfig command. # copy st artup-conf ig text.t xt ...

  • Avaya 106760804 - page 640

    Chapt er 30 30-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy s t artup-con fig runnin g-config Command Mode Global Conf igurati on. Descr iption Execut es the st artup (b ootup) conf igurati on. The runni ng (curr ent) configur ation di splays as a mer ge of the e xecute d file an d the exis ting con ...

  • Avaya 106760804 - page 641

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-25 System copy st artup-conf ig t f tp Command Mode Priv ile ged. Description Uploads the st artup (bo otup) configura tion to t he specif ied fil e on the specifi ed TFTP server . Synt ax copy s tart up- conf ig tf tp <filen ame_opt_pa th> <ip-a ddr> Sample Output The following e xample shows t ...

  • Avaya 106760804 - page 642

    Chapt er 30 30-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy t f tp Command Mode Privil eged. Descr iption Copies the speci fied fi le from th e specif ied TFTP serv er to NVRAM. Syntax copy tftp <filename_op t_path> <i p-addr> Sample Output The foll owing exam ple copies a f ile fr om a ...

  • Avaya 106760804 - page 643

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-27 System copy t f tp boot flash Command Mode Global Confi gur at io n. Description Copies a speci fied binary boot image f rom a speci fied TFTP serve r to bootflas h. Synt ax copy tf tp bootfl ash <i mage_opt_pat h> <tftp-se rver> Sample Output The following e xample copi es a boot i mage from ...

  • Avaya 106760804 - page 644

    Chapt er 30 30-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy t f tp flash Command Mode Global Conf igurati on. Descr iption Copies a specif ied binar y image f rom a speci fied TFTP se rver to the fl ash locati on APP1 or APP 2. Syntax copy tftp f lash {app1 | app2} <ima ge_ opt _pa th> <ip- ...

  • Avaya 106760804 - page 645

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-29 System copy t f tp pcmcia Command Mode Global Confi gur at io n. Description Copies a speci fied binary image from a specifie d TFTP server to the PCMCIA flas h card. Synt ax copy tf tp pcmcia {c ardapp1 | cardapp2} < image_opt_p ath> <ip-a ddr> Sample Output The following e xample copi es a ...

  • Avaya 106760804 - page 646

    Chapt er 30 30-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 copy t f tp running-config Command Mode Global Conf igurati on. Descr iption Copies a specif ied fil ename from a s pecifie d TFTP server , and exec utes a script . Th e runn ing c onfigu rat io n d is p la ys as mer ge of th e e xecuted file an ...

  • Avaya 106760804 - page 647

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-31 System copy t f tp st artup-conf ig Command Mode Priv ile ged. Description Copies a specifie d fil e fr om a specifi ed TFTP ser ver to the st art up (b ootup) configura tion in NVRAM. Synt ax copy tf tp start up-confi g <fil ename_opt_p ath> <i p-addr> Sample Output The follo wing example co ...

  • Avaya 106760804 - page 648

    Chapt er 30 30-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 cpu_redu ndancy co nsole Command Mode Global Conf igurati on. Descr iption Changes the ethe rnet cons ole IP a ddress fo r the supe rvisor modu le in the specifi ed sl ot. Syntax cpu_redun dancy conso le {slo t1 | slo t2} <ip-addr> Sample ...

  • Avaya 106760804 - page 649

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-33 System cpu_redund ancy hello-interval Command Mode Global Confi gur at io n. Description Sets the hello time in sec onds for the standby supe rvi sor . The valid range is 1 to 300 sec onds. The def ault set ting is 5 seconds. Th e no command restore s the de fault se tting. Synt ax Sample Output The foll ...

  • Avaya 106760804 - page 650

    Chapt er 30 30-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 cpu-redu ndancy mac -pref ix Command Mode Global Conf igurati on. Descr iption Reset s the MAC pref ix for the st andby super visor . Syntax cpu_redun dancy mac-pr efix res et Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 651

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-35 System cpu_redund ancy synchro nize Command Mode Global Confi gur at io n. Description Synchronizes t he activ e and stan dby supervi sor modules . Synt ax cpu_re dundancy sync hronize Sample Output The following e xample sync hronizes t he activ e and stan dby supervi sor modules. (configure)# cpu_r edu ...

  • Avaya 106760804 - page 652

    Chapt er 30 30-36 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 delete pcmcia Command Mode Global Conf igurati on. Descr iption Delete s a fi le fro m the /pcm cia f lash car d file syst e m. Syntax delete pcm ci a <fi lename> Sample Output The foll owing exa mple delet es the je rry2.tx t from to /pcm ...

  • Avaya 106760804 - page 653

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-37 System dir Command Mode User . Description Displays a di rectory l isting of a single f ile or all files l ocated in NVRAM. Synt ax dir [ <filename> ] Sample Output The following e xample disp lays all of the fi les curren tly in NVRAM. > dir Device Name Capacity (Bytes) Available (Bytes) Utiliz ...

  • Avaya 106760804 - page 654

    Chapt er 30 30-38 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 erase Command Mode Privil eged. Descr iption Erase s the spec ified fil e from NVRAM. Syntax erase <f ilen ame> Sample Output The foll owing exam ple erase s the tes t.txt file from NVRAM. # erase t est.txt File ’/NVRAM/test.txt’ delet ...

  • Avaya 106760804 - page 655

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-39 System erase l egacy-c onfigs Command Mode Priv ile ged. Description Erases all l egacy (v3. x and earl ier) conf igurati ons ( .cfg fi les) fr om NVRAM. If you do not plan on going ba ck to 3.x co de, this command makes it pos sible f or you to f ree NVRAM space on your system easily . Synt ax eras e le ...

  • Avaya 106760804 - page 656

    Chapt er 30 30-40 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 eras e sc ript s Command Mode Privil eged. Descr iption Erase s all ASCII script files ( .txt files) from NVRAM. This comman d is useful f or clean ing up NVRAM, but you should copy the star tup configur ation to a TFTP serve r first , or copy t ...

  • Avaya 106760804 - page 657

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-41 System eras e st ar tu p -c onf ig Command Mode Priv ile ged. Description Erases the st artup (b ootup) conf iguration from NVRAM. Synt ax erase startup- config Sample Output The following e xample era ses the st artup con figuration from NVRAM. # erase sta rtup-c onfi g File ’/nvram/startup.txt’ del ...

  • Avaya 106760804 - page 658

    Chapt er 30 30-42 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 get 48_p ort_mode Command Mode Global Conf igurati on. Descr iption Displ ays the st atus of 4 8-port mode . If you i nstall a n 80-seri es, 48-por t, 10/1 00 module wit h T elco connector s (M8048R-100TC) in a swit ch, you must e nable 48-p ort ...

  • Avaya 106760804 - page 659

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-43 System get Fabr ic _mode Command Mode Global Confi gur at io n. Description Displays the Fabric mode t hat the s witch is c urrentl y operati ng in. T o cha nge th e Fab ric mo de set tin g an d s peed that the swit ch o pe rates at, use the set Fabric _mode comma nd . For i nfo rm at ion on the set Fabr ...

  • Avaya 106760804 - page 660

    Chapt er 30 30-44 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 hos tna me Command Mode Global Conf igurati on. Descr iption Speci fies the hostname t hat is di splayed i n the syst em prompts and default configur ation fi lenames. Use the no for m of the command to dis able the hostname c urrentl y being us ...

  • Avaya 106760804 - page 661

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-45 System ip http he lp server Command Mode Global Confi gur at io n. Description Configures th e HTTP server for online h elp. The no form of th i s co mma nd clears t he server locat ion. Synt ax Sample Output The following e xample conf igures t he HTTP server for onli ne help. (configure)# ip ht tp help ...

  • Avaya 106760804 - page 662

    Chapt er 30 30-46 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 nvram initializ e Command Mode Global Conf igurati on. Descr iption Resets all s witc h set tin gs exc ept th e fo llow ing to thei r de fau lt valu es: ■ Startup imag e ■ Fabric mode ■ 48-port mod e Syntax nvra m init iali ze Sample Outpu ...

  • Avaya 106760804 - page 663

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-47 System pcmcia ini tia li ze Description Configure Description I n itia lize s t he P CMC IA car d. Synt ax pcmc ia in it iali ze Sample Output The foll owin g exa mp le init iali ze s th e PCM CIA c ard insta lled in t he PCMCIA carri er on the Superviso r module. (configure)# pcmci a initial ize Systems ...

  • Avaya 106760804 - page 664

    Chapt er 30 30-48 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 reloa d Command Mode Global Conf igurati on. Descr iption Reload s the swi tch so ftw are . Syntax reloa d Sample Output The foll owing exa mple reloa ds the switch softwa re. (configure)# r eload Booting the operational system, plea se wait ... ...

  • Avaya 106760804 - page 665

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-49 System reset Command Mode Global Confi gur at io n. Description Resets the swi tch and re loads the software . Synt ax reset Sample Output The foll owin g ex a mp le rese ts th e sw itc h an d relo ad s the s oftw a re. (configure)# r eset Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 666

    Chapt er 30 30-50 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 secure- mode Command Mode Global Conf igurati on. Descr iption Enabl es and disa bles secu re mode. S ecure mode r estricts man agement of the sw itc h to th e fo llow ing secu re pr o toc ols : ■ HTTPS ■ SSH ■ SNMPv3 When you enab le sec ...

  • Avaya 106760804 - page 667

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-51 System set 48 _por t_mo de Command Mode Global Confi gur at io n. Description Enables 48-port mod e on the swi tch. If you ins tall an 8 0-serie s, 48-port , 10/100 modul e with T elco connectors (M8048R-100TC) i n a switch , you must ena ble 48-por t mode for t he module to ope rate. Synt ax Systems P55 ...

  • Avaya 106760804 - page 668

    Chapt er 30 30-52 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set d ebug Command Mode Global Conf igurati on. Descr iption Enabl es debug mode f or troubl eshooti ng. The defau lt is of f. Syntax Sample Output The foll owing exam ple enabl es debug command . (configure)# set de bug on Syst ems P550R, P580, ...

  • Avaya 106760804 - page 669

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-53 System set Fabr ic_mode Command Mode Global Confi gur at io n. Description Se ts th e Fab ric mode set ting and s pee d th at the s wit c h op era te s at. Fabr ic mode 1 operat es at 55 MHz. Fa bric mode 2 operates at 66 MHz. Only P580 and P 882 chas sis that contain a ll 80-seri es module s support Fab ...

  • Avaya 106760804 - page 670

    Chapt er 30 30-54 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set u tilization high-thre shold Command Mode Global Conf igurati on. Descr iption Sets the high ut ilizat ion thre shold at whi ch the swi tch gener ates a an e vent. Y ou can set a h igh uti lizati on t hr eshold for t he CPU, f or ward ing en ...

  • Avaya 106760804 - page 671

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-55 System Systems P580 and P882. FORE Sets the high threshold for utilizat ion of th e forwarding engine on the supervis or modul e. 100% FORE utilization is the total capacity of the supervis or module to forward out-of-band traffic. When 100% utilization is reached , the performance of the switch may degr ...

  • Avaya 106760804 - page 672

    Chapt er 30 30-56 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set u tilization monitor ing Command Mode Global Conf igurati on. Descr iption Enabl es utili zation monito ring for the CPU or for warding en gines. The default settin g for ut ilizat ion monito ring is di sabled. Syntax Syst ems P580 and P882. ...

  • Avaya 106760804 - page 673

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-57 System set utiliza tion threshold-eve nt Command Mode Global Configur atio n. Description Enables event logging f or utili zation monito ring of t he CPU or forwa rding engines. W hen event l ogging is enabl ed, the swit ch genera tes an eve nt if the high-u tilizat ion thre shold is e xceeded. The defa ...

  • Avaya 106760804 - page 674

    Chapt er 30 30-58 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 setup Command Mode Global Conf igurati on. Descr iption Sets up the cons ole IP addr ess, pass word, mask a nd gateway . Syntax set up Sample Output The foll owing exa mple reset s the swi tch and re loads t he softwar e. (configure)# setup Welc ...

  • Avaya 106760804 - page 675

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-59 System show boot Command Mode User . Description Displays BOOT envi ronment inf ormation. Synt ax show boot Sample Output The following e xample disp lays the boot env ironment info rmatio n. > show boot Checking for valid image in BOOT. File Information: File Format Type = Binary Target Location = Bo ...

  • Avaya 106760804 - page 676

    Chapt er 30 30-60 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show calend ar Command Mode User . Descr iption Displ ays the ca lendar settin gs. Syntax show cale ndar Sample Output The foll owing comman d displays the cale ndar sett ings. (configure)# show calendar The date is 06/21/2007 The time is 22:05: ...

  • Avaya 106760804 - page 677

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-61 System show clock Command Mode User . Description Di spl ays th e sy ste m clo ck. T h e [de tai ls] o p tion d isp lays th e su mm er-time setting (i f any) . Synt ax show clo ck [detai ls] Sample Output The following c ommand show the c lock deta ils. (configure)# show cloc k details The date is 06/21/ ...

  • Avaya 106760804 - page 678

    Chapt er 30 30-62 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show cpu Command Mode User . Descr iption Displ ays confi guration and statu s informat ion for t he supervi sor module. Syntax show cpu {con fig | st atus} Sample Output The foll owing exa mple displ ays the cp u confi guration informati on. &g ...

  • Avaya 106760804 - page 679

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-63 System show cpu_re dundancy Command Mode User . Description Displays conf igurati on and stat us infor mation about the redu ndant superv isor . Synt ax show cpu_r edundancy { config | statu s} Sample Output The following e xample d isplays t he config informati on for th e redun dant superviso r slots 1 ...

  • Avaya 106760804 - page 680

    Chapt er 30 30-64 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show fi le_n am e Command Mode Privil eged. Descr iption Displ ays the co ntents of a specif ied file in NVRAM. Syntax show fil e_name <filena me> Sample Output The foll owing exampl e displ ays the c ontents of the s tartup.t xt fil e loc ...

  • Avaya 106760804 - page 681

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-65 System show flas h Command Mode User . Description Displays the layout and conten ts of fl ash memory . Synt ax show fl ash Sample Output The following e xample d isplays the layout and the con tent of t he switch’ s flash memory . > show fl ash Checking for valid image in BOOT. File Information: Fi ...

  • Avaya 106760804 - page 682

    Chapt er 30 30-66 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show running- config Command Mode Privil eged. Descr iption Displ ays the cu rrent ru nning co nfigurat ion. Syntax show runni ng-config Sample Output The foll owing exa mple displ ays the cu rrent ru nning c onfiguratio n. # show runn ing-confi ...

  • Avaya 106760804 - page 683

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-67 System show secure -mode Command Mode User . Description Displays the secure mode s etting. Synt ax show sec ure-mode Sample Output Secure mode enabled Systems P580 and P882. ...

  • Avaya 106760804 - page 684

    Chapt er 30 30-68 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show sntp Command Mode Global Conf igurati on. Descr iption Displ ays infor mation abou t the Simpl e Network T ime Protocol (SNTP). Syntax show sntp Sample Output The follo wing example displ ays informatio n about the SNTP setti ngs on the swi ...

  • Avaya 106760804 - page 685

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-69 System show st artup-config Command Mode Priv ile ged. Description Displays any e xisting s tartup c onfigurat ions (st artup.tx t file) Synt ax show sta rtup-confi g Sample Output The following e xample disp lays the startup- config. # sho w star tup- con fig Documentation# show startup-config Contents ...

  • Avaya 106760804 - page 686

    Chapt er 30 30-70 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show time zon e Command Mode User . Descr iption Displ ays a lis t of time zone abbrevia tions for use in th e clock timezo ne command. Syntax show time zone Sample Output The foll owing exa mple displ ays the l ist of time z ones set o n the s ...

  • Avaya 106760804 - page 687

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-71 System show utilizat ion result s Command Mode User . Description Displays uti lizati on statisti cs for t he CPU or forwa rding engi nes. Synt ax show uti lization r esults {{cpu} | {forwardi ng-engine <chip-f abport> <chip-ind ex> }} * Note: For an expl anation o f fabric ports and forwardi ...

  • Avaya 106760804 - page 688

    Chapt er 30 30-72 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show utilizat ion set tings Command Mode User . Descr iption Displa ys the cur rent s etti ngs for ut iliz atio n mon itor ing. Syntax show util ization setting s Sample Output CPU monitoring is enabled Forwarding Engine monitoring is enab led C ...

  • Avaya 106760804 - page 689

    Docu ment N o. 10 -3 00 090 , Issu e 1 30-73 System show versi on Command Mode User . Description Displays the software v ersion cu rrent ly runnin g on the swit ch. Synt ax show ver sion Sample Output The following e xample d isplays the software v ersion cu rrently runnin g on the s wit ch. > show versio n Avaya Switch Agent v5.3.1 Systems P55 ...

  • Avaya 106760804 - page 690

    Chapt er 30 30-74 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 ...

  • Avaya 106760804 - page 691

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 31-1 31 T emperatures Ove rview This chapt er descri bes the f ollowing c ommands: ■ clear t em per at ure s ■ set te mperatu re (shut down) ■ set te mperatu re (warni ng) ■ show temper atures ...

  • Avaya 106760804 - page 692

    Chapt er 31 31-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 clear t emperatures Command Mode Global Conf igurati on. Descr iption Reset s all con figured warni ng and shut down temperatur es (in Celsi us) to their d efault va lues. The defaul t values a re list ed in T able 31-1 . Syntax clear t emperatur es ...

  • Avaya 106760804 - page 693

    Docu ment N o. 10 -3 00 090 , Issu e 1 31-3 Temperat ures set tempera ture (s hut down) Command Mode Global Configur atio n. Description Sets the shutdown t emperatur e for a sp ecific compone nt of the switch. The defa ult sett ing fo r th e CP U sen sor is 100° C. The de fault sett ing for all ot her components i s 65° C. Synt ax set t emperatu ...

  • Avaya 106760804 - page 694

    Chapt er 31 31-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set temp era tur e (w arn in g ) Command Mode Global Conf igurati on. Descr iption Sets the warnin g temper ature (in Cel sius) f or a speci fic compone nt of th e switc h. T he d ef aul t va lu es a re li sted in T able 31-3 . Syntax set tempe ratu ...

  • Avaya 106760804 - page 695

    Docu ment N o. 10 -3 00 090 , Issu e 1 31-5 Temperat ures Sample Output The following e xample set s the backp lane-sen sor upper warning tempera ture to 4 4° (Cel sius). (configure)# set temperatur e backplane-senso r warning upper 44 Systems P550R, P580, P880, and P882. {up per | low er | low-limit} Indicates warning being chang ed. Upp e r w a ...

  • Avaya 106760804 - page 696

    Chapt er 31 31-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show tempe ratures Command Mode User . Descr iption Displ ays the cu rrent te mperatu res and t he configur ed tempera ture li mits. There is no revers e mapping to this c ommand. Syntax show temper atures Sample Output The foll owing exa mple displ ...

  • Avaya 106760804 - page 697

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 32-1 32 User Interface Ove rview This chapt er descri bes the f ollowing c ommands: ■ configu re ■ connect ■ custo m- acces s-ty pe ■ disa ble ■ enabl e ■ end ■ exit ■ help ■ lengt h ■ pas swor d ■ set cu stom -acc ess -ty pe ■ set de bug ? ...

  • Avaya 106760804 - page 698

    Chapt er 32 32-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ■ terminal output pa use ■ term inal p ari ty ■ termi nal speed ■ term inal s top b its ■ termi nal width ■ username ■ width ...

  • Avaya 106760804 - page 699

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-3 User Interf ace configur e Command Mode Priv ile ged. Description Enters the Glo bal Config uration m ode. Synt ax config ure Sample Output The following e xample ente rs Global Configurat ion mode on t he switch CLI: # config ure (configure)# Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 700

    Chapt er 32 32-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 connect Command Mode Privil eged. Descr iption Log in to a hos t that suppor ts T elnet. Syntax connect { <ip-add r> | <h ostname> } Sample Output The foll owing exa mple connec ts to the host with the IP a ddress 123.23.23.2. # connect ...

  • Avaya 106760804 - page 701

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-5 User Interf ace cust om -acc ess -typ e Command Mode Global Confi gur at io n. Description Creates a cus tom access type. The swi tch supports a maximum of 30 custom acce ss types. Synt ax To C r e a t e : custom-acc ess-type <cat Name> [sys-confi guration [ro]] [mod ule-port -mgmt [ro]] [events -mg ...

  • Avaya 106760804 - page 702

    Chapt er 32 32-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output For exampl e, the fol lowing command cre ates a cus tom access type that allows us ers read -only permi ssion for module and p ort sett ings and r ead- write pe rmission f or layer 2 switchi ng setti ngs: (configure)# custo m-access-t ...

  • Avaya 106760804 - page 703

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-7 User Interf ace disable Command Mode Priv ile ged. Description Ex its Priv i lege d mo de. R eturn s to User mo de . Synt ax disabl e Sample Output The following e xample exit s Privil eged mode. # disabl e Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 704

    Chapt er 32 32-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 enabl e Command Mode User . Descr iption Enters the Pr ivi le ged m ode. Syntax enable Sample Output The foll owing exa mple enter s Privil eged mode: > enab le # Syst ems P550R, P580, P880, an d P882. ...

  • Avaya 106760804 - page 705

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-9 User Interf ace end Command Mode Global Configur atio n. Description Exits Global Co nfigurat ion mode and r eturns to Pr ivileged mode. Synt ax end Sample Output The following e xample exit s Global Co nfigurat ion mode. (configure)# end # Systems P550R, P580, P880, and P882. ...

  • Avaya 106760804 - page 706

    Chapt er 32 32-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 exit Command Mode All modes. Descr iption Exits th e cur ren t mod e an d r een ter s the p rev ious m ode. Syntax exit Sample Output The foll owing exam ple exit s Global Conf igurati on mode. (configure)# ex it # Syst ems P550R, P580, P880, an ...

  • Avaya 106760804 - page 707

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-1 1 User Interf ace help Command Mode User . Description Displays a li st of com mands that are avai lable in the cu rrent command mode and a bri ef descr iption of ea ch command. Synt ax help Sample Output This example displays th e commands t hat are available i n User mode. > help dir [<filename> ...

  • Avaya 106760804 - page 708

    Chapt er 32 32-12 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 length Command Mode User . Descr iption Sets the term inal sc reen lengt h. The defa ult value is 24. Use t he no form of this co mmand to re store th e defau lt value of 24. Syntax Sample Output The foll owing exa mple sets the number of lines ...

  • Avaya 106760804 - page 709

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-13 User Interf ace pa s s w o r d Command Mode User . Description Changes a user p assword. All users ca n change th eir own pass words. Synt ax passwor d <passwd > Systems P580 and P882. T able 32-4. Parameters, Keywords, Arguments Name Definition <passw d> A new passw ord. Passw ords can con s ...

  • Avaya 106760804 - page 710

    Chapt er 32 32-14 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set c ustom-a ccess-t ype Command Mode Global Conf igurati on. Descr iption Modifi es an exis ting cust om-access -type. Syntax set custom- acc ess -type <catName> [s ys-confi guration { ro | rw | none}] [module-p ort-mgmt {ro | rw | non e ...

  • Avaya 106760804 - page 711

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-15 User Interf ace Sample Output For example, the foll owing command gi ves custom a ccess typ e CA T1 read- write per mission fo r module and port s ettings a nd read-o nly perm ission fo r syst em confi gur atio n se t ting s: (configure)# cust om-access- type CA T1 sys-configu ration r o module-po rt-mgm ...

  • Avaya 106760804 - page 712

    Chapt er 32 32-16 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 set d ebug Command Mode Global Conf igurati on. Descr iption Enabl es or disa bles debug mode. If ena bled, this mode displa ys system messages t hat help A vaya T echnical Sup port tro ubleshoot network problems. * Import ant: A vaya re commend ...

  • Avaya 106760804 - page 713

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-17 User Interf ace set login Command Mode Global Configur atio n. Description Configures use r account se curity . Synt ax set l ogin [att empt s <n um-l ogi n-a ttem pts> ] [timeout-l im i t <timeou t-li mit> ] [min-pa ssword-le ngth <min-pass wor d-length> ]} Systems P580 and P882. T abl ...

  • Avaya 106760804 - page 714

    Chapt er 32 32-18 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show c ustom-acc ess-t ype Command Mode User . Descr iption Displ ays the cu stom access types that are current ly configu red on the switc h. Syntax show custo m-acces s-type Syst ems P580 and P882. ...

  • Avaya 106760804 - page 715

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-19 User Interf ace show hist ory Command Mode User . Description Displays an al phabetic list of the last 20 c ommands enter ed in the current session. Synt ax show his tory Sample Output The foll owin g ex amp le di spl ay s th e last com m and s en tere d in th e curr ent session: > show histor y show ...

  • Avaya 106760804 - page 716

    Chapt er 32 32-20 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show login Command Mode Privil eged. Descr iption Displ ays the cu rrent se tting s for user account s ecurity . The following setti ngs are di splayed: ■ Login att empt limit ■ T imeout limit ■ Minimum password l ength Syntax show logi n ...

  • Avaya 106760804 - page 717

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-21 User Interf ace show sessi ons Command Mode User . Description Displays the active T elnet, ser ial, and PPP CLI ses sions. Synt ax show ses sions Sample Output The following e xample d isplays t he activ e session s: > show sessi ons Session ID Line ID Location 1 6vty 205.181.0.56:yyyy Systems P550R, ...

  • Avaya 106760804 - page 718

    Chapt er 32 32-22 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show usern ame Command Mode User . Descr iption Displ ays user a ccount set tings. The followin g informat ion is di splayed fo r each user accou nt: ■ User name ■ Access typ e ■ Management t ype ■ Expirati on date ■ St at u s Syntax u ...

  • Avaya 106760804 - page 719

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-23 User Interf ace teln et Command Mode Priv ile ged. Description Star t s a T eln et s es sio n to th e ho s t tha t you s pec i fy . Synt ax telne t { <ip- addr ess> | <host-name> } [ <tcp-port> ] Sample Output The foll ow in g ex a mp le star ts a T e lnet ses si on t o th e s wit ch a ...

  • Avaya 106760804 - page 720

    Chapt er 32 32-24 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 terminal dat abit s Command Mode Global Conf igurati on. Descr iption Sets the datab its width on the ter minal port (also ca lled cons ole port ). Syntax term ina l d atabi ts { 7 | 8} Sample Output The foll owing exa mple sets the term inal da ...

  • Avaya 106760804 - page 721

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-25 User Interf ace terminal flowcontrol Command Mode Global Configur atio n. Description Se ts th e fl ow co n trol for t he ter min a l po rt (a lso c a lled con s ole por t). Synt ax termin al flowcon trol { none | xon/ xoff } Sample Output The foll owin g ex amp le se ts the term i nal flow con trol par ...

  • Avaya 106760804 - page 722

    Chapt er 32 32-26 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 terminal leng th Command Mode User , Privilege d, or Global Configurati on. Descr iption Sets th e nu m ber o f lin es on t he te rmin al s creen for t he c u rren t sess ion . The no form of this comma nd restores the defau lt lengt h to 24 li ...

  • Avaya 106760804 - page 723

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-27 User Interf ace terminal output p ause Command Mode User . Description Enables output fr om the ter minal to pa use when the configur ed screen length is reached. A p ause is i ndicated by a --more-- prompt . The no form of this command dis ables thi s functi on. In additio n, you can termi nate a curren ...

  • Avaya 106760804 - page 724

    Chapt er 32 32-28 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 terminal p a rity Command Mode Global Conf igurati on. Descr iption Sets the parit y param eter on t he console port. Syntax terminal parity {none | even | odd} Sample Output The foll owing exa mple sets the te rminal par ity para meter t o none ...

  • Avaya 106760804 - page 725

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-29 User Interf ace terminal speed Command Mode Global Configur atio n. Description Sets the baud r ate on th e console port. The de fault bau d rate is 9600. Synt ax termin al speed {30 0 | 1200 | 2400 | 4800 | 9600 | 192 00 | 38400 | 57600 | 1 15200} Sample Output The following e xample set s the term inal ...

  • Avaya 106760804 - page 726

    Chapt er 32 32-30 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 terminal st opbit s Command Mode Global Conf igurati on. Descr iption Sets the stopbi ts parame ter on the consol e port. Syntax term ina l s top bits { 1 | 2} Sample Output The foll owing exa mple sets the termi nal stopbi ts to 1: (configure)# ...

  • Avaya 106760804 - page 727

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-31 User Interf ace terminal wid th Command Mode User . Description Sets the numb er of cha racter c olumns on the termi nal scree n. The no form of th is co mm and re sto res t he de faul t va lue of 80 c har ac ter s. Synt ax Sample Output The following e xample set s the ter minal widt h to 120 char acter ...

  • Avaya 106760804 - page 728

    Chapt er 32 32-32 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 user name Command Mode Privil eged. Descr iption Creat es a new use r account . Y ou can create up to 27 user accounts. Syntax To C r e a t e : username < name> password [encr ypt ed-type1] <passwd > [access- type {read- only | read ...

  • Avaya 106760804 - page 729

    Docu ment N o. 10 -3 00 090 , Issu e 1 32-33 User Interf ace Sample Output The following e xample cre ates the username boston wit h a password of mass and an a ccess-ty pe of admin: # user n am e bos ton pa ss wo rd ma ss a cce ss- type adm i n Systems P580 and P882. [access-type {read-only | read- write | admin | <cat Name> }] The access ty ...

  • Avaya 106760804 - page 730

    Chapt er 32 32-34 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 wid th Command Mode User . Descr iption Sets the number of charact er columns on the ter minal scr een. The no form of this command rest ores the d efault va lue of 80 c haracter s. Syntax Sample Output The foll owing exa mple sets the number of ...

  • Avaya 106760804 - page 731

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 33-1 33 VLAN Ove rview This chapt er descri bes: ■ set 3co m-mapping- table ■ set vla n ■ set vla n (f rame form at) ■ set vl an <vlan-i d> <mod-swpo rt-range > ■ set vt p-snooping domain ■ show 3com-map ping-tab le ■ show vlan ■ show v ...

  • Avaya 106760804 - page 732

    Chapt er 33 33-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set 3com- mapping-t able Global Conf igurati on. Descr iption Creat es or del etes a 3Com mapp ing table . Syntax Sample Output The foll owing exam ple clear s an entr y from a 3Com mapping table. (configure)# clea r 3com-mappi ng-table T estT able ...

  • Avaya 106760804 - page 733

    Docu ment N o. 10 -3 00 090 , Issu e 1 33-3 VLAN set vlan Command Mode Global Configur atio n. Description Creates a VLAN or mod ifies the na me of an exi sting VLAN. The clear command delet es a VLAN. If the VLAN th at you spec ify do es not exis t, t his co mma nd c rea tes th e VLAN. If th e VLAN that you s pecify do es exist , this command rena ...

  • Avaya 106760804 - page 734

    Chapt er 33 33-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 set vlan (frame format) Command Mode Global Conf igurati on. Descr iption Modi fies the frame tag ging fo rmat of th e speci fied swit ch ports that are bound to t he specif ied VLAN. Syntax set vl an { <vlan-i d> | name <vlan-name> } &l ...

  • Avaya 106760804 - page 735

    Docu ment N o. 10 -3 00 090 , Issu e 1 33-5 VLAN set vlan <vla n-id> <mod-swport-range> Command Mode Global Configur atio n. Description Binds additio nal ports to a VLAN if t runking is e nabled on t he specif ied port. Non-tr unk ports suppor t only a single , default VLAN per port. Bi nding multiple VLANs to a non-t runk port is NOT ...

  • Avaya 106760804 - page 736

    Chapt er 33 33-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 Sample Output In the f ollowing exampl e, 5/1 refer s to port 1 on module 5. 5 /1-20 refer s to ports 1 t hrough 20 o n module 5. Thi s command al so accepts a comma- delimit ed list o f ports o r port ra nges. (configure)# set vlan 100 4/1, 4/3 -4 ...

  • Avaya 106760804 - page 737

    Docu ment N o. 10 -3 00 090 , Issu e 1 33-7 VLAN set vtp-s nooping domain Command Mode Global Configur atio n. Description Defines the VTP d omain name from whic h the swit ch learns VLANs f rom Cisco VTP fra mes. The clear form of this comman d clears any l earned or defined do main name. The default settin g is a null s tring. If VTP snoopi ng is ...

  • Avaya 106760804 - page 738

    Chapt er 33 33-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 show 3com- mapping-t able Command Mode User . Descr iption Displ ays the 3Com map ping tabl es. All tables a re displayed by defa ult. Syntax show 3com-mapp ing-tabl e [<table- name>] Sample Output The fo llowing exa mple sho ws the 3Co m Mapp ...

  • Avaya 106760804 - page 739

    Docu ment N o. 10 -3 00 090 , Issu e 1 33-9 VLAN show vlan Command Mode User . Description Displays in formati on ab out a ll VLANs on the swit ch or t he VLAN that you specify . Synt ax Sample Output The following e xample disp lays deta iled inf ormation a bout the VLANs currentl y configu red on the s witch. (configure)# show vl an detail ed Sys ...

  • Avaya 106760804 - page 740

    Chapt er 33 33-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show vtp- snooping co nfigure Command Mode User . Descr iption Displ ays the co nfigured and learne d VTP snooping configura tion inform ation. The default is None. Syntax show vtp-s nooping con figurat ion Sample Output The foll owing exa mple ...

  • Avaya 106760804 - page 741

    Command Reference G uide for t he Avaya P580 and P88 2 Multis ervice Swi tches, v6 .1 34-1 34 VRRP Ove rview This chapt er descri bes: ■ router vrrp ■ ip vrrp ■ ip vrrp (vr-id ) ■ ip vrr p (auth-ke y) ■ ip vrrp (ov e rrid e) ■ ip vrrp (pr eemp t) ■ ip vrrp (pr ior ity) ■ ip vrrp (ti mer ) ■ show ip vr rp ...

  • Avaya 106760804 - page 742

    Chapt er 34 34-2 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 router vrr p Command Mode Global Conf igurati on. Descr iption Enabl es and disa bles VRRP rout ing globa lly . Use the no form o f this command t o disable VRRP rou ting. Syntax Sample Output The foll owing exa mple enabl es vrrp gl obally . (confi ...

  • Avaya 106760804 - page 743

    Docu ment N o. 10 -3 00 090 , Issu e 1 34-3 VRRP ip vrrp Command Mode Interfa ce Configur ation. Description Enables or dis ables VRRP (V irtual Router Redund ancy Protoc ol) on an inte rfac e. Use th e no form of this command to dis able VRRP on an inte rfac e. Synt ax Sample Output The following e xample enabl es VRRP on an i nterface labeled bos ...

  • Avaya 106760804 - page 744

    Chapt er 34 34-4 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip vrrp (vr-id) Command Mode Interf ace Config uration. Descr iption Creat es a virt ual rout er with t he specif ied VRID and ad dress. Use t he no form of this comman d to re move a virt ual route r . Syntax Sample Output The foll owing ex ample c ...

  • Avaya 106760804 - page 745

    Docu ment N o. 10 -3 00 090 , Issu e 1 34-5 VRRP ip vrrp ( auth-key) Command Mode Interfa ce Configur ation. Description Enables or dis ables th e virtual router simple text pass word authen ticatio n for the virt ual router ID. Use the no form o f this co mma nd to di sabl e si mple password au thenti cation f or the vi rtual ro uter . Synt ax Sam ...

  • Avaya 106760804 - page 746

    Chapt er 34 34-6 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip vrrp (ove rride) Command Mode Interf ace Config uration. Descr iption Enabl es or disa bles the address owne r overri de to a vi rtual ro uter . The default is disabl ed . Syntax Sample Output The foll owing exa mple enabl es address owner over r ...

  • Avaya 106760804 - page 747

    Docu ment N o. 10 -3 00 090 , Issu e 1 34-7 VRRP ip vrrp (preempt) Command Mode Interfa ce Configur ation. Description Enables or dis ables preempt mode for a v irtual r outer . The default is Enabled . Synt ax Sample Output The follo wing ex ample en abl es pr eempt mode to v irtual rou ter v r id 1 on an inte rfac e la bel ed bost on . (config-if ...

  • Avaya 106760804 - page 748

    Chapt er 34 34-8 Command Reference Gui de for the Avaya P580 and P882 M ultiserv ice Switch es, v6.1 ip vrrp (pri ority) Command Mode Interf ace Config uration. Descr iption Sets the virt ual route r priori ty value for the vi rtual r outer ID. Us e the no form of t his command to restore the de fault value of 100. Syntax Sample Output The foll owi ...

  • Avaya 106760804 - page 749

    Docu ment N o. 10 -3 00 090 , Issu e 1 34-9 VRRP ip vrrp (timer) Command Mode Interfa ce Configur ation. Description Se t the adver tise me n t tim e r val ue fo r th e vi rtua l rou t er ID . Use the no form of this c ommand to rest ore the d efault va lue of 1. Synt ax Sample Output The following e xample set s the ip vr rp timer to 4 for vi rtua ...

  • Avaya 106760804 - page 750

    Chapt er 34 34-10 Command Referenc e Guide for t he Ava ya P580 and P8 82 Multis ervice Swi tches, v 6.1 show ip vrr p Command Mode User . Descr iption Displ ays VRRP infor mation if it is en abled on th e switch. Syntax show ip vrrp [ <if-name> [r outer -id <vr -id> ]] [deta il] Sample Output The foll owing exam ple displ ays vrrp inf ...

  • Avaya 106760804 - page 751

    Command Referen ce Guide for the Ava ya P580 an d P882 Mu ltiservic e Switches , v6.1 IN-1 Index A access li st comma nds access -list 20 -2 ip access-gr oup 20-9 ip access-l is t 20-11 ip acl-logg ing 20-12 ip acl-logg ing loggin g-i n t er val 20-13 show access -gr oup 20-14 show access -l is ts 20-15 show acl-match -timer 20-16 show ip access -l ...

  • Avaya 106760804 - page 752

    Index IN-2 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 boot syst em flash 30-4 buff ering commands set b ufferin g fab ric- p ort ( age -t ime r) 4-2 set b ufferin g fab ric- por t (hi pri-a lloc ) 4-3 set b ufferin g fab ric- por t (hi p ri-s erv ic e-ra tio ) 4-4 set buf fering fabric -port (p riority thres ...

  • Avaya 106760804 - page 753

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-3 copy ru nning-confi g 30-20 copy ru nning-confi g startup -config 30- 21 copy ru nning-confi g tftp 30-22 copy star tup-c onfig 30-23 copy star tup-c onfig runn ing-confi g 30-24 copy star tup-conf ig tftp 30- 25 copy tftp 30-16 , 30-17 , 30-18 , 30- 19 , 30-26 , 30-29 copy tftp boot flas h 30-27 , 30- ...

  • Avaya 106760804 - page 754

    Index IN-4 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 H help basic fun ctions 1-3 UI co mm and 32-11 hostname 30-44 hunt comman ds set huntg roup 8-2 , 8-5 , 8-8 set huntg roup (redi stribut e) 8-4 show huntgro up 8- 6 , 8-7 hunt group commands set huntg roup (redi stribut e) 8-7 set h unt gr ou p auto -flu ...

  • Avaya 106760804 - page 755

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-5 IP commands, (contin ued) ip te lnet ina ctivity -period 11- 47 ip te lnet port 11-4 8 ip vlan 11- 49 ping 11-50 redis tribute 11-51 show ip arp 11-54 , 11-5 5 show ip interface 11 -56 show ip irdp 11-57 show ip route 11- 59 show ip traf fic 11-62 show tc p configur ation 11-63 show udp sta tistics 11- ...

  • Avaya 106760804 - page 756

    Index IN-6 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 ip vrrp (auth- key) VRRP command 34-5 , 34-6 , 34- 7 ip vrrp (prior it y) VRRP command 34-7 ip v rrp (t imer ) VRRP command 34-9 ip-m ax-a rp- entrie s 11-29 IP-RIP com mands defa ult -metr ic 12-2 ip rip au thenti cation k ey 12-3 ip rip au thenti cation ...

  • Avaya 106760804 - page 757

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-7 L3 Cache commands , (contin ued) ip unicas t route- cache agi ng 14-8 ip unicas t route- cache has h-dept h 14-9 ip unicas t route- cache has h-mode 14-9 ip unicas t route- cache max-size 14- 10 ip unicas t route- cache upda te-timeou t 14-11 ipx ro ute-cach e aging 14-12 ipx ro ute-cach e hash-mode 14 ...

  • Avaya 106760804 - page 758

    Index IN-8 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 MCAST commands, (cont inued) set inte llig ent-multi cast router -port-prun ing 10-18 set inte llig ent-multi cast router -port-pruning time 10-2 0 set in tel lige nt-m ultic ast s essi on- prun ing 10-21 set inte llig ent-multi cast session- prunin g tim ...

  • Avaya 106760804 - page 759

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-9 Policy co mmands ip ac cess -lis t 20 -1 1 show acc ess-grou p 20-14 show acc ess-lis ts 20-15 show ip access-l ists 20-17 Port comm an d s 21-1 {set | cl ear} port huntgroup 21-6 clear po rt coun ters 21-3 set port 3com-mappi ng-tabl e 21-4 set po rt allo w-learnin g 21-5 set p ort a u to-ne got iatio ...

  • Avaya 106760804 - page 760

    Index IN-10 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 set aft instance vlan ( hash-tabl e-size) 2-1 1 set aft super -age time 2-12 set b ufferin g fab ric- p ort ( age -t ime r) 4-2 set b ufferin g fab ric- por t (hi pri-a lloc ) 4-3 set b ufferin g fab ric- por t (hi p ri-s erv ic e-ra tio ) 4-4 set buf fe ...

  • Avaya 106760804 - page 761

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-1 1 show 3com-m apping-ta ble 33-8 show acc ess-grou p 20-14 show acc ess-lis ts 20-15 show acl-ma tch-timer 20-16 show af t config 2- 13 show af t entry 2- 14 show af t instanc e 2-16 show alarms Logging command 16-21 show appl etalk a ccess-li sts 3-19 show appl etalk arp 3- 20 show appl etalk globa ls ...

  • Avaya 106760804 - page 762

    Index IN-12 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 show ssl cert re q 27-5 show ssl ciphers 27-7 show ssl confi g 27-7 , 27-8 show startup- config 30-6 9 show system fans 22-2 show system power 22-3 show system ram 22-4 show t cp co nfig ura tio n 11 -6 3 show t em per atu re 31-6 sh ow t im e z one 30-7 ...

  • Avaya 106760804 - page 763

    Ind ex Docu ment No . 10-300090 , Issue 1 IN-13 System commands , (continu ed) copy star tup-c onfig runn ing-confi g 30-24 copy star tup-conf ig tftp 30- 25 copy tftp 30-16 , 30-17 , 30-18 , 30- 19 , 30-26 , 30-29 copy tftp boot flas h 30-27 , 30-47 copy tftp fla sh 30-28 copy tft p running- config 30-30 copy tftp sta rtu p-co n fig 30-31 dir 30-3 ...

  • Avaya 106760804 - page 764

    Index IN-14 Command Reference G uide for the Avaya P580 and P8 82 Multiserv ice Switch es, v6.1 V viewing CGM P st atis ti cs 10-31 cli ent por ts 10-33 clients 10-37 inte llig ent m ulti c ast s essio ns 10-36 management co nfigured c lient po rts 10-37 management co nfigured s essions 10 -38 VLAN all 10-37 VLAN commands set vlan 33-3 set vlan (fr ...

Manufacturer Avaya Category Power Supply

Documents that we receive from a manufacturer of a Avaya 106760804 can be divided into several groups. They are, among others:
- Avaya technical drawings
- 106760804 manuals
- Avaya product data sheets
- information booklets
- or energy labels Avaya 106760804
All of them are important, but the most important information from the point of view of use of the device are in the user manual Avaya 106760804.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Avaya 106760804, service manual, brief instructions and user manuals Avaya 106760804. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Avaya 106760804.

Similar manuals

A complete manual for the device Avaya 106760804, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Avaya 106760804 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Avaya 106760804.

A complete Avaya manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Avaya 106760804 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Avaya 106760804, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Avaya 106760804, that we can find in the current document
3. Tips how to use the basic functions of the device Avaya 106760804 - which should help us in our first steps of using Avaya 106760804
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Avaya 106760804
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Avaya 106760804 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Avaya 106760804?

Use the form below

If you did not solve your problem by using a manual Avaya 106760804, ask a question using the form below. If a user had a similar problem with Avaya 106760804 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)