Manual Indesit S-3000

86 pages 3.28 mb
Download

Go to site of 86

Summary
  • Indesit S-3000 - page 1

    DIGITAL CAM ERA S-3000W / S-3000 OPERATING INSTRUCTIONS Please read this operating instructi ons carefully for proper operati on, Please read this operating instructi ons carefully for proper operati on, Please read this operating instructi ons carefully for proper operati on, Please read this operating instructi ons carefully for proper operati on ...

  • Indesit S-3000 - page 2

    A IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructio ns 1. Read Instructio ns 1. Read Instructio ns 1. Read Instructio ns All the s afety and opera ting ins tructions should be rea d before the product is operated. 2. Retain Instruct ions 2. Retain Instruct ions 2. Retain Instruct ions 2. Retain Instruct ions The safet y and operat ing instructions s ...

  • Indesit S-3000 - page 3

    B 12. Grounding or P olariza tion 12. Grounding or P olariza tion 12. Grounding or P olariza tion 12. Grounding or P olariza tion This product i s eq uipped wi th a three-wire grounding-t ype plug a plug having a thi rd (grounding) pi n. This plug will on ly fit into a groundin g-type powe r outlet. This is a safety featur e. If you are un able to ...

  • Indesit S-3000 - page 4

    C 21. Replaceme nt Parts 21. Replaceme nt Parts 21. Replaceme nt Parts 21. Replaceme nt Parts When replacement part s are req uired, be s ure the s ervic e technici an ha s used repl acement part s speci fied b y the man ufacture r or h ave the same char acteristics as th e orig inal part. Unauthorized s ubst i tutions may result in fire, elect ric ...

  • Indesit S-3000 - page 5

    D WICHTIGE SICHERHEITSANWEISUNGEN 1. 1. 1. 1. Alle Alle Alle Alle An we isun ge n lese n. Anweisungen lesen. Anweisungen lesen. Anweisungen lesen. Vor Betrieb des Erzeugnisses sollten a lle Sicherheit s-und Bedienungsa nleitungen geles en werden. 2. Die Anwei sungen aufb ewahren. 2. Die Anwei sungen aufb ewahren. 2. Die Anwei sungen aufb ewahren. 2 ...

  • Indesit S-3000 - page 6

    E 11. Stromversorgung 11. Stromversorgung 11. Stromversorgung 11. Stromversorgung Dieses Erzeugnis s ollte nur an der au f dem Typenschi ld angegeb enen Stromversorgungs art bet rieben werd en. Wenn Sie nicht sic her sind, was f ü r eine Stromversorgung S ie haben, so wenden Sie s ich bitt e an Ihren Erzeugnish ä ndler oder an das lokale Ele ktri ...

  • Indesit S-3000 - page 7

    F 20. Besch 20. Besch 20. Besch 20. Besch ä digung, die Wartung erfordert digung, die Wart ung erfordert digung, die Wartung erfordert digung, die Wart ung erfordert Ziehen S ie den Stecker di eses Erzeugni sses aus der St eckdose und wenden Si e sich an q ualifi ziertes Wartungs personal, wenn ei ne der folgenden Bedingungen vorliegt : a. We nn d ...

  • Indesit S-3000 - page 8

    G MISES EN GARDE IMPORTANTES 1. Lire les inst ructions 1. Lire les inst ructions 1. Li re les instructions 1. Lire les inst ructions Lire toutes les instruct ions de s é curit é et de fonct i onnement avant de fa ire fonctionner l ’ apparei l. 2. Conserver ces inst ructions 2. Conserver ces inst ructions 2. Conserver ces inst ructions 2. Conser ...

  • Indesit S-3000 - page 9

    H 12. Mise 12. Mise 12. Mise 12. Mise á la terre ou polarisation la terre ou polarisation la terre ou polarisation la terre ou polarisation L ’ apparei l est dot é d ’ une fich e trifilaire ave c mise á la te rre, dont la tro isi é me broche assure la m ise á la terre. Cette fiche ne rentrera que d ans les prises trifilaire s de mise á la ...

  • Indesit S-3000 - page 10

    I e. Si l ’ appare il est tomb é ou qu ’ il a é t é endommag é . f. Si l ’ appareil affiche une nett e modificat ion de ses performances, cela s i gnifie qu ’ il a be soin d ’ê tr e r é par é . 21. Pi 21. Pi 21. Pi 21. Pi é ces de rechange ces de rechange ces de rechange ces de rechange Si l ’ on a beso in de pi é ces d e recha ...

  • Indesit S-3000 - page 11

    J Contents Composition(i ncluding accessor ies) ・・・・・ 1 Outline and features ・・・・・・・・・・・・・・・・・・ 2 W arnings and cautions w hen using ・・・・・ 4 Note when usi ng ・・・・・・・・・・・・・・・・・・・・・ 5 Facility names and functions ・・・・・・・・・・・ 6 Lens ...

  • Indesit S-3000 - page 12

    1 Composition (including acce ssories) When unpa c king the camera, chec k for the followi ng items and ac cessories. ...

  • Indesit S-3000 - page 13

    2 Outline and features The S-3000W /S-3000 is a ne w concept 2/ 3-inch CCD camer a that stresses fundam ental cam era perform ance. Advance d func tions are r ealize d by the n ew sing le chip dig ital sig nal proces sor th at impr oves gra dation response, c olor r eproduci bilit y and perc eived resolut ion. T he DSP is fully d igitized fr om pro ...

  • Indesit S-3000 - page 14

    3 Outline and featur es ■ ■ ■ ■ Extensive operationa l convenience ● Program mable op eration s witches with functions assig ned acc ording to app licatio n. ● Auto white and shad ing com pensation coupled with le ns extender . ● Gain, det ail, gam m a and other settin gs can be stored in 4 sc ene files for eas y recall. ● Each opti ...

  • Indesit S-3000 - page 15

    4 Warnings and cautions when u sing W ARNING ■ ■ ■ ■ Vie wfinder lens hazard ● Do not point t he e yelens towar d the sun or other bright l ight sourc e. There is dan ger of ph ysical burns an d loss of eyesight. ● Do not plac e the vie wfinder with the le ns point ed toward the s un. T here is r isk of burn dam age to the viewf inder i ...

  • Indesit S-3000 - page 16

    5 Note w hen using NOTE ********** CCD characteristic phenomena * ********* The f ollowing t ypes of phenomena are inna te char acteristic s of a char ge coupled d evice (CCD) and ar e not m alfunc tions. Be aware of thes e when using a CCD cam era f or broadcast or other dem anding a pplicat ions. Smear W hen a bright obj ect is p ick ed up, thin ...

  • Indesit S-3000 - page 17

    6 Facility names and functions 1 Viewfi nder connec tor Connect the access ory 1.5-inc h vie wfinder or th e separate ly sold G M-51 5- inch vie wfinder. 2 Viewfi nder hori zontal loc k lev er Secures th e side to side pos ition a djustm ent of the 1.5-inc h vie wfinder. 3 Viewfi nder front t o rear lock screw Secures th e front to r ear pos ition ...

  • Indesit S-3000 - page 18

    7 Facility names and functions 12 Auto wh ite/black balanc e switch A W B: Select for aut omatic white ba lance adjustm ent. Set the W HITE BA L switch 20 to A or B to stor e the adj ustm ent in respec tive m emor y A or B. ABB: Selec t for autom atic bl ack balance adjustm ent. The a djustm ent is stor ed in a sp eci al memo ry . 13 Shutter s witc ...

  • Indesit S-3000 - page 19

    8 Facility names and functions 17 Power s witch 〔 VTR ST DBY/SAV E 、 CAM ON/ OFF 〕 Left: (VT R:STDBY 、 CAM :ON ) Both cam era and VT R power on and recordi ng starts. Center: (VT R:SAVE 、 CAM: ON) Camer a power on, VT R power s ave mode Right: (VTR:S AVE 、 CAM:OFF) Camer a power off , VTR power sav e mode. 18 Power LED Off : Camera powe ...

  • Indesit S-3000 - page 20

    9 Facility names and functions 24 Scene fi le LEDs Light to in dicat e the sc ene file se lected b y the Scene F ile buttons 25 . 25 Scene F ile buttons Select f rom am ong 4 scene f iles. 26 Function bu tton Used for changing se ttings ( e.g., deta il am ount). 27 Up/down butto ns Change the s ettin g selected by the F unction button 26 . 28 Left/ ...

  • Indesit S-3000 - page 21

    10 Facility names and functions 32 Video outp ut connec tor (BNC) Compos ite video sig nal output ( 1 Vp-p/7 5 Ω ). 33 Monitor output c onnector (BN C) Video si gnal outp ut for monitor (1 Vp-p/75 Ω ). The s ame char acter signa l as the viewf inder is superim posed on the vide o signal to allo w check ing the settin g m enu from the m onitor s ...

  • Indesit S-3000 - page 22

    11 Facility names and functions 43 Rear co ver Contains con nections for batt ery and ex tension adapter, etc . 44 DC IN connector (X LR, 4P) Connect the separat ely sold AC a dapter f or operating from AC power. 45 Intercom connector (XLR, 5P) Connect in tercom headset (MT -12MF) when using the RU-Z1/RU-Z2/RU-Z3 46 150 V Out c onnect or (5 pin, CA ...

  • Indesit S-3000 - page 23

    12 Facility names and functions 48 Brightnes s contro l Adjusts viewfinder screen br ightness . Does not aff ect camer a output signal. 49 Cont rast cont rol Adjusts v iewfinder screen c ontrast. Does not aff ect camer a output signal. 50 Peaking c ontrol Adjusts viewfind er video c ontours f or easier f ocus adjustm ent. Does no t affec t camera o ...

  • Indesit S-3000 - page 24

    13 Lens installation 1. Raise the lens le ver a nd rem ove the m ount cap. 2. Align the lens c enter m ark with the i ndent a t the upper part of the l ens m ount and inst all the l ens 3. Lower the lens lever to secure th e lens. 4. Engage the c able with the cab le clam p and connect it to the le ns conn ector. ● Refer to the lens ins truct ion ...

  • Indesit S-3000 - page 25

    14 Lens flangeback adjustme nt When operat ing a zoom lens, if the f ocus is not precisely al igned at bot h t he t ele photo and wide a ng l e extremes o f the l ens, the flan geb ack (distance fro m the lens mounting pl ane t o t he focal pl an e) is adjusted. This adjust ment is generally required only once u nl ess t he l ens is replaced. Refer ...

  • Indesit S-3000 - page 26

    15 White shading adjustment White shad in g adjustment is reco mmended aft er rep lacing the len s. The adjustmen t relates to the camera vertica l colorati on. If the lens in cludes an extender, the sha ding can be optimiz ed f or both extender on an d of f mod es. (Vertical co lor ation refers to an effect wher eby the image of an overal l w h it ...

  • Indesit S-3000 - page 27

    16 White shading adjustment 5. FUNC    △ ▽ Operate the Fu nction buttons t o produc e the Full Funct io n mode Special Set pag e, then shift t o t he WHT Shad in g page. 6. At the W HT Shading p age, shift the cursor to Auto Setup. 7. Press the < directi on button for ab out 1 sec ond to conduct A W B . Then pre ss t he > dire ction b ...

  • Indesit S-3000 - page 28

    17 Camera adapter installation     1. Align th e ada pter with the camera gui de and guide pi n. Attach t he adapt er and engage the co nne ctor. 2. Tighten t he scr ews provided with t he handle to se cure t he ca m era adapt er t o the camera.    CAUTION Tighten t he scr ews complete ly . Check for absence of w obb le betw een t he c am ...

  • Indesit S-3000 - page 29

    18 Microphone installation Mic holder attachment Attach the M H -Z3 microp ho ne holder (se parat ely sold). Microphone Install the (s eparately sold) MC-Z2/Z3 microp ho ne and C-300MA micr ophone cable as follows. 1. Attach the M C -Z2/Z3 microphone to the mi c ho lder. 2. Connect the C-300MA mic cable to t he microphone. 3. Secure the cab le in t ...

  • Indesit S-3000 - page 30

    19 Tripod mounting Use the acce ssory TA-Z3 tripod ada pt er t o mo unt the camera on a t r ipo d. 1. Securely at t ach t he tripod ada pter to the tripod. Shift the ad apter screw position t o obt ain the best balanc e. The adapter can acc ept t w o types of screws. Use the screw ho le that matches the t r ip od. 2. Secure the ca mera on t he trip ...

  • Indesit S-3000 - page 31

    20 Shoulder pad position The shoulder p ad can be shifted up to 15 mm in eit he r direction from the c enter (factory ) position. The position c an be adjust ed f or comfortable o peration. 1. Loosen 2 screws. 2. Slide th e pad f orward or rearwar d t o t he best posit ion. 3. Tighten t he 2 scr ews. ...

  • Indesit S-3000 - page 32

    21 Anton-Bauer battery pack A nton-Bauer batter y pack Procure the sep arately sold battery hold er to operate the camera fro m an Anton-Baue r battery. 1. Use 4 screws to at t ach t he bat t ery holder to the rear of the camera adapter. Note:The o ptional b utter y holder c onnectin g cable is requ ired. Co nsult Hit achi dens hi serv ice cen ter. ...

  • Indesit S-3000 - page 33

    22 GM-51 5-inch v i e w fi nder attachment Use the se paratel y sold AT -30 vie wfinder ada pter when insta lling the G M-51 5- inch vie wfinder. 1. Raise the lock lever of the AT-30 h orizont ally and rem ove th e vie wfinder mounti ng scre w fr om the AT-30. Insert th is scr ew in the bottom of the G M-51. Ins ert the screw tog ether with the GM- ...

  • Indesit S-3000 - page 34

    23 GM-51 5-inch v i e w fi nder attachment 3. Removal Disconnect the v ie wfind er cabl e. Tur n the AT-30 loc k lev er B counter-c loc k wise and pull the release k nob to a llow rem ovin g both the GM-51 and AT - 30. ...

  • Indesit S-3000 - page 35

    24 VTR connection VTR docking Examples of compatible VTRs Sony DNV-5 ( BETACAM SX ) BVV-5 ( BET ACAM ) PVV-3 ( BET ACAM SP2000PRO ) DSR-1 ( DVCAM ) Matsushita (Panasonic) AU − 45H ( M Ⅱ Prom ind ) AJ-D90 ( DVCPRO ) JVC BR-S422 ( S-VHS ) BR-D40 ( DIGITAL-S ) Required inner modules (separately sold) Note: Refer to ...

  • Indesit S-3000 - page 36

    25 VTR connection VTR ty pes and connections System Main VTR VIDEO(VT R) AUDIOLEVEL CA-Z31 CA-Z32 VTR inner module BETACAM CO MP -60dB −−− −−− IM-Z3D BVV-5, DNV-5 −−− −−− IM-Z3S PVV-3 C-201TE C-501TE C- 201TB C-501TB −−− BVW -50 DVCAM COMP -60dB −−− −−− IM-Z3S DSR-1 M2 COMP -60dB −−− −−− IM-Z3P ...

  • Indesit S-3000 - page 37

    26 VTR connection VTR power save W hen the camera PW R sw it ch is set t o VTR Save, t he VTR types operat e as follow s . VTR Operation DNV-5,BVV-5, PVV-3, DSR-1, AU-45H,AJ-D80, The VTR goes to power sav e mode to avoid batt ery depletion BR-S422, BR-D40 All VTR operations inhibited. REC review and play back monitor W hen the VTR includes a record ...

  • Indesit S-3000 - page 38

    27 Pow er supply W hen the CA-Z31/CA-Z32 is installed, power can be supplied as follows. Set the Power Select switch accordingly. 1. Connect the separately sold AP-60 AC adapter to the DC IN connector. 2. Connect the camera base station or VTR t o t he CCU/VTR connector . 3. Connect Anton-Bauer battery . ( Note ) ● W hen a Betacam type VTR is ...

  • Indesit S-3000 - page 39

    28 Vie w finder adjustm ent Viewfinder installati on 1. Turn the lock lev e r as indicat ed by the arrow to secure the v iewfinder gu ide. 2. Turn the viewfin der l oc k lever fully counter-c lockwise. 3. Align th e 2 v i ewfinder gui de p i ns with the c amera guid e holes and insert the v i ewfinder. 4. Secure the lo ck lever fir mly in t he arro ...

  • Indesit S-3000 - page 40

    29 View finder adjustm ent Position a djustme nt 1. Turn the loc k lev er in the arrow directio n t o loo sen the horizonta l lo ck. 2. Turn the lock scr ew in the arrow d irecti on t o lo osen the front to rear lock. 3. Adjust the v i ewfinder le f t to right an d f ront to rear pos it i ons for comfortab le v i ewing. 4. Tighten the l ock screw f ...

  • Indesit S-3000 - page 41

    30 Viewfinder adjustment Visibility adjustmen t The focus can b e fine adjusted to i ndiv idual preference. 1. Adjust the ca mera fo cus. 2. Turn the visibi l ity ring to adjust t he f ocus of the viewfin der i m age. Press the Fl ip-u p button and raise the ey ecup. Screen adjustme nts As required, adj ust the brig ht nes s, contrast and peaking c ...

  • Indesit S-3000 - page 42

    31 Iris adjustment Auto, manual and ins ta nt auto ar e selec tab le. Instant aut o functio ns duri ng manual operati on to adjust the iris autom atical ly while the but ton is pressed. 1. A u tomatic Set the lens Iris switch t o A. T he iris is adjusted autom atical ly to accom m odate camer a video s ignal ch anges. 2. Manual Set the s witch to M ...

  • Indesit S-3000 - page 43

    32 Zoom and macro operation Zoom operation Zoom operation c an be set f or m otorized or m anual. 1. Motori zed zoom Set the zoom switch to S ( servo) and oper ate the T -W switch. Press W for wide angl e and T for telep hoto. Press s trongl y for fast and gentl y for slo w operat ion. 2. Manual zo om Set the zoom switch to M ( manual) and m anuall ...

  • Indesit S-3000 - page 44

    33 Optical filter selection The c orrect optical filter accor ding to the s cene l ight sourc e needs t o be sel ected in order to obtain c orrect white balance. Set the CC/ND filter k nob as f ollows. No Filter Light sour ce 13 , 2 0 0 K Stud io (tungsten or halogen) Sunris e, sunset 2 5,600K+1/16ND Outdoors c lear sk y 35 , 6 0 0 K Fluorescent l ...

  • Indesit S-3000 - page 45

    34 Video gain selection The gain c an be r aised to enabl e images in loca tions with inade quate l ighting. N otice th at noise increases as the gai n is ra ised. 1. The vie wfinder im age dark ens when lig hting is insuff icient. If th e lens is auto ir is, the iris op ens complete ly. T he iris sett ing c an be chec ked from the viewfi nder scr ...

  • Indesit S-3000 - page 46

    35 White and black balance adjustm ent White balanc e adjustment W hite balance is best adjus ted in the se que nce AW B (auto whit e bala nce), ABB (auto b lack balanc e), the n again AW B. Readjustm ent is nor mall y not requ ired even at po wer off /on. Be sure to adjus t the white b alance after c hanges in the lighting co ndi tio ns . W hite a ...

  • Indesit S-3000 - page 47

    36 White and black balance adjustm ent 4. Adjust th e lens ir is. 5. Set the W hite B AL switch to A or B, then set t he Auto W /B BAL switch to AW B. The switch returns to center and white bala nc e is adjus ted aut om aticall y. 6. During adjus tment, the followi ng m essages appear on the vie wfinder sc reen. 7. Adjustm ent is c ompleted i n abo ...

  • Indesit S-3000 - page 48

    37 White and black balance adjustm ent A uto white balance error me ssages If auto white balanc e adjus tment f ails, th e follo wing error m ess ages appear on the vie wfinder s creen f or about 6 seconds. Mes sage Cause Correction AUTO WH ITE : NG CHANGE TO CAM TRY AGA IN Output s witch set to BAR. Change s witch sett ing to CAM and readj ust. AU ...

  • Indesit S-3000 - page 49

    38 White and black balance adjustme nt Black balance a djust ment Black balance r equires adjus tment in th e foll owing si tuatio ns. ● Equipm ent being used for th e firs t time ● Equipm ent idle f or an ex tended per iod ● Large ch ange of am bient t emper ature ● Gamm a setting ch anged A uto black balance adju stment 1. Set the s witch ...

  • Indesit S-3000 - page 50

    39 White and black balance adjustm ent < Note > ● Observe that the lens co nnec tor is engag ed and the ir is is closed. ● The iris closes autom atically t o bloc k the li ght duri ng black balanc e adjus tm ent. ● During blac k balanc e adjus tment, the gain cir cuit is switched autom aticall y. Althou gh flick er or nois e ma y appear o ...

  • Indesit S-3000 - page 51

    40 Electronic shutter s etting Shutter modes The s electable e lectronic shutter m odes and speeds are as follo ws. Mode Shutter s peeds Applicat ions Standard 1/60, 1/250, 1/500, 1/1000 and 1/2000 s econd Clear im ages of quick ly moving o bjects LOCK SCAN (Lockscan ) 1/50.14 t o 1/2000 s econd (1H steps) Reduce horizo nta l str eak ing in im ages ...

  • Indesit S-3000 - page 52

    41 Electronic shutter s etting 2. The m ode and spee d change s eque nce is ind icated be low. 1/60 → 1/250 → 1/500 → 1/10 00 → 1/2000 CC FRM  ←  Var.1/ *** Lock scan mode sett ing The loc k sc an mode avo ids flic ker in scenes showin g a com puter monitor screen. 1. Set the Shutter s witch to SE L to pro duce t he lock scan m ...

  • Indesit S-3000 - page 53

    42 Scene file W hen taking sc enes havi ng diff erent cond itions, t he settin gs nee d to be opt im ized for eac h scen e. The sc ene file function e nables s ettin g the cond itions f or each s cene b eforehand and stor ing them in m emor y for instant recall at the requir ed tim e. T he 4 scene f iles can be used f or storin g 4 sets of sc ene c ...

  • Indesit S-3000 - page 54

    43 Camera ID setting An identif icat ion (ID) des ignatio n for the c amer a can be as signed b y using th e ID SET page of the sett ing m enu. ID No. : A 3 place alphanum eric code ass igned to e ach cam era. Convenient when co ntrolli ng multi ple cam eras from a single per sonal co mputer . A specif ic cam era c an be access ed from the com pu ...

  • Indesit S-3000 - page 55

    44 Genlock The c amera can be o perat ed from exter nal synchro nizatio n. The m ode is au tomatic ally s witched f rom internal to exter nal s ync when an external s ync sign al is s upplied. Setting 1. Set the Ou tput/A uto Knee s witch to Bar and press the F uncti on button to disp lay the Bar Funct ion page in the viewf inder. 2. Press the ▽ ...

  • Indesit S-3000 - page 56

    45 Setu p card A separ ately sold s etup card can be us ed f or storing the setti ng menu da ta. The data can t hen be used to quick ly restore the proper se tup. ● A sm all size ge neral pur pose mem or y c ard (C ompac t Flash 2M) can be us ed as th e setup c ard. Handling The s etup card can be insert ed and rem oved r egardles s of po wer on ...

  • Indesit S-3000 - page 57

    46 Setu p card Setup card data operat ion The Mem or y Card pa ge of th e setting m enu is used for s toring and retr ieving s etup card d ata. < Note > The Mem or y Card pa ge cannot be used d uring camer a control pan el oper at io n. Saving data to card 1. Insert the setup card and press the Func tion button. 2. The f ollowing Setup C ard pa ...

  • Indesit S-3000 - page 58

    47 Setu p card SETUP CARD FILE NO DATE TIME 1 97.01.01 12:00 2 97.06.01 12:00 3 97.02.22 12:00 4 97.03.01 12:00 SAVE FILE? YES ->PUSH (LEFT) CANCEL->PUSH (UP) 5. If the cur sor is pos itio ned at the c orrect File No., press the button for Yes. If the number is incorr ect, press the △ button for Cancel an d return to t he Mem ory Card Top m ...

  • Indesit S-3000 - page 59

    48 Vie w finder indications Lighted indicators The follo wing lig hte d indic a tors appear abo ve and be low the vie wf inder scr een. ! B T S T :T ALL Y (T a ll y) ‥ ‥‥‥‥‥‥ B :BATT (Batter y) ‥‥‥‥‥‥ S :VTR SAV E (VTR sav e) ‥‥‥ ! : (Setting dis crep ancy) ‥‥‥ VTR conne cted: Lights duri ng recording C ...

  • Indesit S-3000 - page 60

    49 Vie w finder indications In addit ion to the video im age, the viewfi nder dis pla y s m essages related t o cam era settings and oper ating s tatus, center an d safet y zone m ark ers and other inf orm ation. ● W hen set to on at the s etting m enu VF D ispla y page, setti ng item s are ind icated at t he top and bottom edges of the screen. ? ...

  • Indesit S-3000 - page 61

    50 Vie w finder indications Display description Item Descript ion Extender (No indicati on) E W : Extender off : Extender on : Wide setting ( × 0.8) on Shutter s peed OFF 1/60,1/250,1 /500,1/ 1000,1/200 0 1/50.14 t o 1/2083 CC FRM AES : Shutter off : Preset shutter : Lock scan mode : CC frame mode : Auto e lectronic shutte r mode R ...

  • Indesit S-3000 - page 62

    51 Vie w finder indications Check mode Set the s witch to Chec k and pr ess the Check button. T he CAM m ode is retur ned abou t 3 seco nds after releasing t he butt on. ● All item s of the CAM m ode are ind icated at the top and bottom edges of the s creen (see C AM m ode descripti on). ● The center of the sc reen shows the DT L, Flesh ton e a ...

  • Indesit S-3000 - page 63

    52 Vie w finder indications One line indicating mode The s witch oper ation eff ect is in dicated a t the 2n d line f rom the bot tom . Display description Switch Des cription Effect (set t o Zebra) ZEBRA : ON, OFF ULTRA GAIN ULTRA GAIN : ON, OFF FLESH TO NE FLESH T ONE : ON, OFF DNR DNR : ON, OFF CS-1, CS-2 CONTRAST : OFF, NORMAL, HIGH Q ...

  • Indesit S-3000 - page 64

    53 Status Indication of Viewfinder Screen BARS mode (Note) Abo ve item s are s et at the Fu nction (B AR m ode) m enu. ’98.06.01 12:00 HTACHI ***** Date Ti m e ID ...

  • Indesit S-3000 - page 65

    54 Function menu screen Settings w i th Function menu Preparation men u Settings can be changed by using the Function m enu. The princ ipal settings are as follows. Mode Menu Description 1) CAM Setup Card Settings when using setup c ard 2) CAM Function 1 M emor y item s f or each sc ene file 3) CAM Function 2 O ther m emor y item s 4) CAM VF Displa ...

  • Indesit S-3000 - page 66

    55 Function menu screen CA M mode (Output sw itch) Standard menu SETUP CARD FILE NO DATE TIME 1 97.01.01 12:00 2 97.06.01 12:00 3 97.02.22 12:00 4 97.03.01 12:00 LOAD FILE->PUSH (RIGHT) SAVE FILE->PUSH <(LEFT) FORMAT->PUSH CHECK+ FUNCTION 1 SCENE 1 CONTRAST :OFF AUTO IRIS :AVERAGE GAIN LOW :0dB MID :9dB HIGH :18dB DTL :- > MASKING :P ...

  • Indesit S-3000 - page 67

    56 Function menu screen CA M mode (Output sw itch) Full menu MASKING <MEMORY> HUE SA T LINEAR R -25 16 R-G 86 Y -64 60 G-B -36 G 0 0 B- R 26 C 0 1 8 G -R 6 9 B -52 0 B-G 2 3 M 67 0 R -B 5 MASTER SAT :-90 INITIALIZE KNEE/CLIP KNEE POINT : 0 KNEE SLOPE : 10 WHITE CLIP : 32 INITIALIZE GAMMA <MEMORY> GAMMA TABLE :A TOTAL GAMMA :0 R ADJUST : ...

  • Indesit S-3000 - page 68

    57 Function menu screen Setup card menu detail Top menu SETUP CARD FILE NO DATE TIME 1 97.01.01 12:00 2 97.06.01 12:00 3 97.02.22 12:00 4 97.03.01 12:00 LOAD FILE->PUSH (RIGHT) SAVE FILE->PUSH <(LEFT) FORMAT->PUSH CHECK+       Save check               Load check              Form ...

  • Indesit S-3000 - page 69

    58 Function menu screen BA R mode (Output sw itch) TIME/DATE YEAR :00 MONTH :01 DAY :0 1 HOUR :00 MINUTE :00 TIME/DATE SET BAR FUNCTION GL SET :-> ID SET :-> TIME/DATE :-> ID DSP :ON DATE :Y.M.D TIME :ON AUDIO TONE:ON GL SET H.PHASE :0 SC COARSE :0 ゚ SC FINE :0 ID SET ID NO. :001 ID DISP : 001 1234567890_? ABCDEFGHIJKL MNOPQRSTUVWX YZ< ...

  • Indesit S-3000 - page 70

    59 Function menu screen Function menu setting items Rectangles indica te initialized settings (pr ess buttons s imultaneous ly ). 1. Function 1 (Scene 1 to 4) main menu (corresponds to scene file) CONTRAST OFF ⇔ NORMAL ⇔ HIGH Selec t Norm al or High when dark s cene com ponents are dif ficult to see due e.g., to back lighting. AUTO IRIS AVERAGE ...

  • Indesit S-3000 - page 71

    60 Function menu screen 1.1 DTL (Scene 1 to 4) sub-menu (corresponds to scene file) DTL LEVEL OFF ⇔− 128 ⇔ 0 ⇔+ 127 Sets detail am ount. DTL FREQ SOFT ⇔ STANDARD ⇔ SHARP SOFT : Set to low detail frequency STANDARD: Set to standard detail f requency SHARP: Set to high detail f requency FLESHTO NE OFF ⇔ ON Set to on to moder ate flesh ...

  • Indesit S-3000 - page 72

    61 Function menu screen 3. VF Display menu SAFETY/CENT OFF ⇔ SAFET Y ⇔ CENTER ⇔ BOT H EXT ENDER OFF ⇔ ON UPPER MID OFF ⇔ ZOOM ⇔ SH UTTER ⇔ REC TIME ⇔ SHT/REC-T UPPER RIGHT OFF ⇔ FOCUS ⇔ BA TTERY FILTER OFF ⇔ ON W HITE BAL OFF ⇔ ON GAIN OFF ⇔ ON AUDIO IND OFF ⇔ ON IRIS OFF ⇔ ON 4. Special Set menu MASKING Change screen ...

  • Indesit S-3000 - page 73

    62 Function menu screen 4-2 DTL sub-menu LEVEL DEP − 128 ⇔− 90 ⇔ 0 ⇔+ 127 Dark c om ponent detail can be set in the range of -128 to +127. CRISP − 128 ⇔− 110 ⇔ 0 ⇔+ 127 Average com ponent detail can be set in the r ange of - 128 to +127. H/V BAL − 128 ⇔ 0 ⇔+ 48 ⇔+ 127 Adjust balanc e between horizontal and vertic ...

  • Indesit S-3000 - page 74

    63 Function menu screen 4-4 Knee/clip sub- menu KNEE POINT − 128 ⇔ 0 ⇔+ 127 Sets the level where knee f unction begins oper ating. KNEE SLOPE − 128 ⇔ 0 ⇔ +10 ⇔+ 127 Sets knee r esponse slope. W HITE CLIP − 128 ⇔ 0 ⇔ +32 ⇔+ 127 Sets the white clip level. INITIALIZE Simultaneous ly press the buttons to initialize Knee/clip ...

  • Indesit S-3000 - page 75

    64 Function menu screen 4-7 System sub-menu ASPECT 16:9 ⇔ 4:3 V-21W only VF DTL CONT MENU ⇔ AUT O VIDEO(VT R) COMP ⇔ Y/C ⇔ VBS ⇔ RGB Also Auto (when inner m odule is connected) Select acc ording to connected VT R. 1.COMPONENT 2.Y/C(S-VHS) 3.VBS(U-m atic) 4.R,G,B AUDIO LEVEL − 60dB ⇔− 20dB Also Auto (when inner m odule is connected) ...

  • Indesit S-3000 - page 76

    65 Function menu screen 5. BA RS Function sub-menu GL SET Execute GL SET sub- menu. ID SET Execute ID IND sub- menu. TIM E/D ATE Execute TIME/DAT E sub-m enu. ID DSP OFF ⇔ ON DATE OFF ⇔ Y. M. D ⇔ M.D.Y ⇔ D.M.Y TIM E OFF ⇔ ON AUDIO TONE OFF ⇔ ON 5-1 GL SET sub-men u H . PHASE − 128 ⇔+ 127 Adjust hor izontal phase during genlock o ...

  • Indesit S-3000 - page 77

    66 Studio sy stem operation Connection w i th RU-Z2/RU-Z3 system The c amer a can be connected into a s y s tem conprising an RU- Z2/Z3 cam era base s tation and RC-Z2A / Z21A/Z3 cam era control panel to enable remote operation of the camera control f unctions. T he camer a and RU-Z2/RC-Z3 can be separated by up to 300 meter s, while a 5-inch viewf ...

  • Indesit S-3000 - page 78

    67 Studio sy stem operation Camer a control f rom personal com puter The cam era can be controlled by RS-232C signals from a personal c omputer . In this case, the JU-C20 RS-232C Level Converter or the J U-Z2 Junc tion Unit is required. Since cam era control s oftware is not supplied,r efer to the protocol technic al data and compile a s uitable pr ...

  • Indesit S-3000 - page 79

    68 Studio sy stem operation Connection with RU-Z1 system The cam era can be connected into a studio system com prising an RU-Z1 rem ote operation unit and RC-Z1A /Z11 cam era control panel to enable rem ote operation of the c amer a control f unctions. T he cam era and RU-Z1 can be separated by up to 300 meters , while a 5-inch viewfinder. MULTI SY ...

  • Indesit S-3000 - page 80

    69 Studio system operation A uto setting w ith RU-Z3 / RU-Z2 / RU-Z1 (plug & play)s No System Baud rate Audio level Video output Battery t ype 1 RU-Z1 62.5K( * 1) 2 RU-Z2 /RC-Z3 9600( * 1) RGB COMP100 COMP75 YC, VBS ( * 2) (TU- Z3 system) (COMP TRIAX) 9600( * 1) COMP100 ( * 1) 3 TU-Z2 inner modul e via IM-Z3B 9600( * 1) -20db( * 1 ...

  • Indesit S-3000 - page 81

    P er s on al c om p u t er MULTI SYSTEM TRIAX SYSTEM SET UP CARD Micr opho ne MC-Z2 MC - Z3 Mi cro p h one ME - 66 Micr opho ne ho lder MH- Z3 Micr opho ne cable C-300MA Z oom l en s T r ip od ad ap t or TA- Z3 Ca me ra cab le C-152K AB C-502K AB C-103K AB Ca me ra ba se sta ti on RU-Z2/RU-Z 3 Ca me ra ba se sta tio n TU- Z3 Ca me ra cab le C-152K ...

  • Indesit S-3000 - page 82

    71 Service information Connector pin di agrams Came ra Remote (4 pin f em ale) MIC IN (3 pin fem ale) 1 2 3 4 1 2 3 LENS (12 pin fem ale) VF (8 pin m ale) 1 2 3 4 11 5 7 12 6 8 9 10 C B H E F D A G Pin Signal 1 +9V output 2 SD input 3 SD output 4 SD ground Pin Signal 1 MIC GND 2 MIC(H) IN 3 MIC(C) IN Pin Signal 1A U X S W 2 CALL TR G 3G N D 4E N F ...

  • Indesit S-3000 - page 83

    72 Camera adapter ( CA-Z31/CA- Z32) DC IN (4 pin male) INTERCOM (5 pin m ale) 1 2 3 4 1 5 3 4 2 Pin Signal 1S H I E L D 2T 3G N D 4R 5R Pin Signal 1G N D 2N C 3N C 4 +12V input ...

  • Indesit S-3000 - page 84

    73 Service information CCU/VTR (28 pin m ale) < CA-Z31 > A B C D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 15 17 18 20 19 21 22 23 24 CCU/VTR (26 pin m ale) < CA-Z32 > AB 123456 789 1 0 1 1 12 13 14 15 16 17 18 19 20 21 22 23 24 150 V OUT (5 pin m ale) < CA-Z32 > 5 4 1 2 3 Pin Signal Pin Signal A +12V 11 COLOR FRAME B +40V 12 VBS VIDEO C SHIE ...

  • Indesit S-3000 - page 85

    SAFETY INSTRUCTIONS Carafully read all safety messages in this manual and safety Instructions on y our equipm ent. Follow recommended precautions and safe operating practices. SA FETY ALERT SY M BOL This is the “Safety Aler t Sy m bol.” T his symbol is used to call your attention to items or operations that could be dangerous to you or other pe ...

  • Indesit S-3000 - page 86

    HITA CHI DENSHI, LTD. 1, Kanda Izumi-cho Chiyoda-ku, T okyo 101-0024, Japan Phone: 03-5821-5311, FAX: 03-5821-5394 HITA CHI DENSHI A MERICA, LTD.* Headquarters and New York Office 150 Crossway s Park Drive, W oodbury, New York 11797, U .S.A. Phone: 516-921-7200, FAX: 516-496-3718 Chicago Office 450 East Devon Ave., Suite 110 Itasca, IL 60143, U .S. ...

Manufacturer Indesit Category Camcorder

Documents that we receive from a manufacturer of a Indesit S-3000 can be divided into several groups. They are, among others:
- Indesit technical drawings
- S-3000 manuals
- Indesit product data sheets
- information booklets
- or energy labels Indesit S-3000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Indesit S-3000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Indesit S-3000, service manual, brief instructions and user manuals Indesit S-3000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Indesit S-3000.

Similar manuals

A complete manual for the device Indesit S-3000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Indesit S-3000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Indesit S-3000.

A complete Indesit manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Indesit S-3000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Indesit S-3000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Indesit S-3000, that we can find in the current document
3. Tips how to use the basic functions of the device Indesit S-3000 - which should help us in our first steps of using Indesit S-3000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Indesit S-3000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Indesit S-3000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Indesit S-3000?

Use the form below

If you did not solve your problem by using a manual Indesit S-3000, ask a question using the form below. If a user had a similar problem with Indesit S-3000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)