-
Miele CVA5060 - page 1
Operating and installation instructions Built-in coffee machines CVA 5060 CVA 5068 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 611 170 e n-G B ...
-
Miele CVA5060 - page 2
Caring for the environment ..........................................5 Guide to the machine ..............................................6 Accessories supplied ..............................................8 Optional accessories ...............................................9 Warning and Safety instructions ....................................1 0 ...
-
Miele CVA5060 - page 3
Settings: customising your machine .................................2 7 Settings menu ....................................................2 7 Selecting a language ...............................................2 8 Setting the time of day ..............................................2 9 Setting the timer ............................................ ...
-
Miele CVA5060 - page 4
Cleaning and care ................................................4 8 Chart ...........................................................4 8 Rinse the system ..................................................4 9 Milk pipework .....................................................5 0 Rinse milk pipework .............................................5 0 ...
-
Miele CVA5060 - page 5
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Dispose of or recycl ...
-
Miele CVA5060 - page 6
Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a programme option and for saving a setting e Right arrow, for scrolling through the various programme options f Sensor for selecting hot water g Door grip ...
-
Miele CVA5060 - page 7
Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) k Stainless steel milk ...
-
Miele CVA5060 - page 8
Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap ( not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milk pipework Coffee spoon For adding the correct amount of ground coffee Cleaning powder For daily cleaning of the milk pipework Clea ...
-
Miele CVA5060 - page 9
Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.com, from the Miele Spare Parts Department or from your Miele Dealer. Stainless steel milk flask with cap For storing and keeping milk cold ( not suitable for cleaning in a dishwasher) Cleaning powd ...
-
Miele CVA5060 - page 10
This machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on the installation, safety, operation and c ...
-
Miele CVA5060 - page 11
~ The electrical safety of this machine can only be guaranteed when continuity is complete between it and an effective earthing system which complies with local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt the household wiring system should be ...
-
Miele CVA5060 - page 12
~ Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock. ~ If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combine ...
-
Miele CVA5060 - page 13
~ Clean the machine every day to prevent a build-up of bacteria. All parts, except the brew unit, the coffee bean container, the stainless steel milk flask and lid, and the cover of the central spout are dishwasher safe. ~ The machine should be descaled regularly, depending on the hardness of the water, with the descaling tablets supplied. The hard ...
-
Miele CVA5060 - page 14
This machine can be used to prepare espresso, coffee, cappuccino, latte macchiato, milk froth, hot milk and hot water . Milk can be stored for several hours in the stainless steel milk flask depending on the type and on the ambient temperature of the room. This machine has a container for coffee beans so that they can be freshly ground on demand fo ...
-
Miele CVA5060 - page 15
To ensure that the flavour can develop fully and be maintained for longer the machine has an additional function to automatically rinse and pre-warm the system when the machine is cold. This automatic rinsing function is also used to flush coffee remains out of the system and the central spout after use. The hot water from the hot water spout is id ...
-
Miele CVA5060 - page 16
The following notes should help you get to know your coffee machine before starting to use it. Controls This machine has sensor controls which react to touch. To operate the machine, you only need to touch the relevant sensor. There are five sensors: s On/Off sensor: For switching the machine on or off < > Left/right arrows: For scrolling thr ...
-
Miele CVA5060 - page 17
When you use the machine for the very first time , you will be prompted to select a language . ^ Use the right or left arrow until the language you want appears in the display. ^ Touch the OK sensor. The language you have chosen is now set. The request to set the clock format will then appear. ^ Use the arrows to select the clock format you want (1 ...
-
Miele CVA5060 - page 18
The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness"). Filling the water container The quality of the water plays an im ...
-
Miele CVA5060 - page 19
Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. Do not put drinks containing sugar, or instant coffee in the machine. Sugar will damage the machine. ^ ...
-
Miele CVA5060 - page 20
Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of the day is prepared. This will take place automatically if the Rinsing programme option has been set to "On" and the machine is cold. Hot water will run out of the central spout into the drip tray once the machine has ...
-
Miele CVA5060 - page 21
Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. The crema will also be a better quality if the coffee does not have so far to go! ^ Slowly pull the central spout downwards. ...
-
Miele CVA5060 - page 22
Double portion If you want to dispense a double portion of coffee or espresso or to dispense two portions at the same time: ^ touch the OK sensor twice whilst "2 portions?" is in the display. The two portions will be dispensed one after the other . ^ To prepare two cups at the same time, place one cup under each jet. Cancelling preparatio ...
-
Miele CVA5060 - page 23
If you have not added any ground coffee , you must select "No" . Otherwise the machine will assume that there is ground coffee in the chute, and only water will be dispensed the next time coffee is made! To make a drink ^ Place a cup under the central spout. ^ Touch the OK sensor. The machine will prepare espresso or coffee, which will th ...
-
Miele CVA5060 - page 24
To make drinks with milk, ^ place the lid on the stainless steel milk flask by twisting it anticlockwise until it locks into place. ^ Open the machine door and hang the milk flask in the machine as illustrated, ensuring that the milk pipework is correctly engaged. ^ Then close the machine door. Cappuccino, latte macchiato, hot milk, milk froth ^ Pl ...
-
Miele CVA5060 - page 25
User profile drinks The User profile function is used to select the quantity of water and milk for your drink, as well as the fineness of the ground, temperature and pre-brewing to suit your taste and that of your guests (see "Setting up user profiles"). If you have set the machine up for a specific user profile you must first select the ...
-
Miele CVA5060 - page 26
A good espresso or coffee with a thick, even crema depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema should have an even nut-brown colour with dark stripes running through it. You can set the amount of coffee beans t ...
-
Miele CVA5060 - page 27
It is easy to customise your machine to suit your exact requirements. Settings menu To select the various programme options: Settings F qr HI J L n m C ^ Touch the right arrow sensor until "Settings" appears in the display, and then touch the OK sensor. ^ Touch one of the arrow sensors until the option you want is highlighted. ^ Then touc ...
-
Miele CVA5060 - page 28
Water hardness: Soft, Medium, Hard, Very hard Display: Contrast, Brightness Volume: Buzzer tones, Keypad tone Plate warmer (CVA 5060 only): Auto - matic, On, Off Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default and user profiles deleted To return to the previous option in the menu, select "B ...
-
Miele CVA5060 - page 29
Setting the time of day ^ Select "Settings F " from the main menu and touch the OK sensor. Settings Time of day Timer ^ Touch the right arrow sensor until "Time of day" is highlighted and touch the OK sensor. There are three options: Display The Time of day display can be switched on or off. ^ Use the arrow sensors to select &qu ...
-
Miele CVA5060 - page 30
Setting the timer ^ Select "Settings F " from the main menu and touch the OK sensor. Settings Timer Coffee jug ^ Touch the right arrow sensor until "Timer" is highlighted and touch the OK sensor. ^ Select "Set" with the arrow sensors and touch the OK sensor. There are three options: Switch on at: You can choose a time ...
-
Miele CVA5060 - page 31
^ First set the hour with one of the arrow sensors. Touch the OK sensor. ^ Then use the arrow sensors to set the minutes. Touch the OK sensor. The machine will now switch off after the time you have set. If Automatic rinsing is set to "On" and the machine has been used for making drinks, it will automatically carry out a brief rinse befor ...
-
Miele CVA5060 - page 32
Coffee jug (making several cups one after the other) This function can be used to make up to 8 cups of coffee automatically one after the other. ^ Select "Settings F " from the main menu and touch the OK sensor. Settings Coffee jug Prog. the amount ^ Touch the right arrow sensor until "Coffee jug" is highlighted, and touch the O ...
-
Miele CVA5060 - page 33
^ Use the arrow sensor to select the drink that you wish to set the amount of coffee for and then touch the OK sensor. ^ Use the arrow sensor to set the amount to "more" or "less". ^ Touch the OK sensor to save the setting. Setting Pre-brewing When the Pre-brewing function is switched on, the freshly ground coffee is first moist ...
-
Miele CVA5060 - page 34
Setting Automatic rinsing To remove any coffee grounds and residual milk from the system, the water piping must be rinsed through before the first drink of the day is prepared. If Automatic rinsing is selected, the rinse cycle will take place automatically whilst the machine is still cold when the machine is switched on. This will also pre-heat the ...
-
Miele CVA5060 - page 35
Lighting: Setting the brightness You can set how bright the lighting should be on the machine: ^ Select "Settings F " from the main menu, and then touch the OK sensor. Settings Lighting Info ^ Touch the right arrow sensor until "Lighting" is highlighted, and then touch the OK sensor. ^ Select "Brightness", and then tou ...
-
Miele CVA5060 - page 36
Info (showing the number of drinks) The "Info" option enables you to check how many drinks the machine has already dispensed or how many you can still dispense before it has to be descaled. ^ Select "Settings F " from the main menu, and then touch the OK sensor. Settings Info Safety ^ Touch the right arrow sensor until "Inf ...
-
Miele CVA5060 - page 37
To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off. Setting the water hardness For trouble-free operation of the coffee machine, and to ensure that the descaling reminder appears in the display at ...
-
Miele CVA5060 - page 38
– Very hard: Local water hardness levels 3-4 14-21 °d (2.5-3.8 mmol/l) or more Water through-flow: approx. 40 l Steam through-flow: approx. 30 min. ^ Select "Settings F " from the main menu, and then touch the OK sensor. Settings Water hardness Display ^ Use the arrow sensors to highlight "Water hardness" and then touch the O ...
-
Miele CVA5060 - page 39
Activating the plate warmer (CVA 5060 only) You can connect a Miele EGW 4000-14, -29 or an EGW 5000-14 to the coffee machine using a special connection cable available as an optional accessory from your Miele Dealer or the Miele Spare Parts Department. Once the plate warmer is connected, you will need to "install" the plate warmer in the ...
-
Miele CVA5060 - page 40
Showroom programme This function enables the machine to be illuminated in a showroom situtation without the heaters working. Resetting the factory default settings The "factory default" setting is used to reset the various settings back to the default status. From here you can select whether to reset all settings back to the default or to ...
-
Miele CVA5060 - page 41
– Display: Contrast (medium), Brightness (maximum) – Volume: Volume of buzzer tones and keypad tone (maximum setting for both) – User profile: Revert (when switched on). User profiles You can delete all user profiles except for the standard one under "User Profiles". ^ Select "Reset" under "User profiles", and to ...
-
Miele CVA5060 - page 42
The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use. With milky drinks the proportions of espress ...
-
Miele CVA5060 - page 43
Programming the proportions for cappuccino or latte macchiato via the OK sensor ^ Place the appropriate cup or glass for the amount you want to programme under the spouts. ^ Select Cappuccino or Latte Macchiato. ^ Touch the OK sensor until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth, ...
-
Miele CVA5060 - page 44
Programming the amount for hot water via the Hot water sensor ^ Place the appropriate cup for the amount you want to programme under the hot water spout. ^ Touch the Hot water sensor until "Prog. the amount" appears in the display. ^ When sufficient water has flowed into the cup touch the Hot water sensor again. "Save" will then ...
-
Miele CVA5060 - page 45
To cater for different tastes and preferences, you can enter up to 9 individual User profiles. For each User profile, you can select the following individual settings: – The amount of water for coffee-based drinks and hot water – The amount of milk for drinks with milk – The amount of coffee – The water temperature – Pre-brewing (See &quo ...
-
Miele CVA5060 - page 46
Creating a User profile ^ Use the arrow sensors to highlight "Create", and then touch the OK sensor. You can allocate up to 9 User profiles. If you try to allocate more than 9 User profiles, " Memory full " will appear in the display and you will need to delete one name to create space. Letters and numbers will now appear in the ...
-
Miele CVA5060 - page 47
Deleting a User profile If you want to delete the User profile completely, ^ Select "Delete User profile" using the OK sensor. ^ Use the arrow sensors to select the user profile you want to delete. ^ Touch the OK sensor. A tick will appear after the user profile and after a short while it will be deleted. Revert You can programme the mach ...
-
Miele CVA5060 - page 48
Chart Time interval What do I have to do? Each time milk is used to make a drink, if more than one hour has passed since the last drink was made Rinse milk pipework Every day (usually at the end of the day, before the machine is switched off) Rinse the system (pipework) Clean the milk pipework (with cleaning agent) Clean the stainless steel milk fl ...
-
Miele CVA5060 - page 49
Always allow the machine to cool down before cleaning. Please be aware that the water in the drip tray will be hot. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage the machine. Do not use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. It is important to clean the ...
-
Miele CVA5060 - page 50
Milk pipework Rinse milk pipework To prevent milk going off in the machine and the pipework getting clogged up, it should be rinsed through after use . Rinsing is not a substitute for cleaning the pipework through at the end of the day. Maintenance qr HI J L n m C ^ Touch the right arrow sensor to highlight the maintenance symbol and touch the OK s ...
-
Miele CVA5060 - page 51
To clean the pipework in the lid for the stainless steel milk flask, fill the larger of the two plastic containers to the "max." mark with lukewarm water to dissolve the cleaning agent. Fit the lid from the milk flask to the container, making sure that it engages correctly. Hang it in the machine where the stainless steel milk flask norma ...
-
Miele CVA5060 - page 52
Central spout ^ Pull the central spout down as far as it will go ( a ), and pull the cover forwards to remove. ^ Turn the cover around, push the insert up and out and then clean both parts thoroughly. ^ Slide the insert back into the cover until it clicks into place. ^ Pull the jets out of the central spout. ^ Remove the two rubber stoppers, and ma ...
-
Miele CVA5060 - page 53
Water container Empty the water container daily and fill with fresh, cold tap water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine. ^ Clean the surface the water container sits on thoroughly, takin ...
-
Miele CVA5060 - page 54
Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. However, to avoid a build-up of odours, the drip tray should be cleaned every day . After running the last rinse, you should leave the drip ...
-
Miele CVA5060 - page 55
Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container out of the machine and then push the lid back to remove it. ^ Clean the coffee bean container and the lid, and then dry them both thoroughly. ^ Replace the lid, and push the container back into plac ...
-
Miele CVA5060 - page 56
Brew unit The brew unit must be cleaned once a week by hand and without using washing-up liquid, because the moving parts are lubricated and the rubber seals could become brittle in a dishwasher. ^ Remove the water container, waste container and the coffee chute cover. ^ Press the light coloured button under the handle of the brew unit a and whilst ...
-
Miele CVA5060 - page 57
^ Press the light-coloured button under the handle of the brew unit a and whilst doing so turn the handle in the direction of the arrow b . Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit could become blocked. It should therefore be cleaned after approx. 200 portions have been prepared using the clean ...
-
Miele CVA5060 - page 58
When prompted to Drop a cleaning tablet in the ground coffee chute , ^ remove the coffee chute cover and open the lid of the coffee chute. ^ Place a cleaning tablet into the coffee chute. ^ Close the lid, replace the coffee chute cover and close the machine door. ^ Follow the instructions given. When "Prog. finished" appears in the displa ...
-
Miele CVA5060 - page 59
Avoid the following on all types of front: – cleaning agents containing soda, amonia, acids or chlorides, – solvent-based cleaning agents, – cleaning agents containing descaling agents, – stainless steel cleaning agents, – dishwasher cleaner, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, – hard, abrasive sponges ...
-
Miele CVA5060 - page 60
The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display the first time: No. of portions until descaling: 50 . The remaining number of drin ...
-
Miele CVA5060 - page 61
To run the descaling programme Maintenance qr HI J L n m C ^ Touch the right arrow sensor until "Maintenance" is highlighted, and confirm with OK, or , ^ If the machine is switched off, touch the OK sensor whilst the machine is switched off. ^ Select "Descale" and touch the OK sensor. ^ Select "Start" and touch the OK ...
-
Miele CVA5060 - page 62
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Various messages will appear in the display ...
-
Miele CVA5060 - page 63
. . . the lighting suddenly switches itself off. If the machine has not been used for 15 minutes the lighting will switch itself off automatically (see "Settings: customising your machine - Lighting: Setting the switch-off time"). . . . the machine does not switch on even though the "Switch on at" setting for the timer has been ...
-
Miele CVA5060 - page 64
. . . the espresso is not hot enough. ^ Have the cups and system been pre-warmed? The smaller and thicker the cup, the more important it is to pre-warm it. ^ Check the temperatures the different types of coffee have been set to (see "Settings: customising your machine - Setting the temperature"). ^ Check whether the brew unit is blocked. ...
-
Miele CVA5060 - page 65
. . . only water is dispensed when coffee has been selected. The lid of the ground coffee chute has been opened and closed, and then the "Make the coffee?" (with ground coffee) option has been selected. However, the coffee chute has not been filled with ground coffee. After the drink has been dispensed, the coffee machine will revert auto ...
-
Miele CVA5060 - page 66
. . . the descaling programme was started by mistake. The descaling programme cannot be cancelled once you have touched the OK sensor. The programme has to be completed through to the end. This is a safety measure to ensure that the machine is fully descaled, and is important for the long-term protection of the machine and to ensure it functions co ...
-
Miele CVA5060 - page 67
. . . the message "Push water container in as far as it will go" appears in the display. Water has not been taken in. ^ The water container is not correctly positioned inside the machine. Take it out and push it back into the machine so that it clicks into position. ^ This error message also appears if the water container was not correctl ...
-
Miele CVA5060 - page 68
. . . the message "Fault -73" appears in the display. The brew unit cannot be positioned correctly. ^ Take the brew unit out of the machine and clean it thoroughly (see "Cleaning and care - Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position. ^ Set the brew unit to one side and replace the waste con ...
-
Miele CVA5060 - page 69
In the event of a fault which you cannot correct yourself, please contact: – your Miele Dealer or – the Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your machine. These are shown on the data plate inside the machine. Please note that tel ...
-
Miele CVA5060 - page 70
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not su ...
-
Miele CVA5060 - page 71
Building-in and combination options The appliance is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer). The ...
-
Miele CVA5060 - page 72
Installation Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit. The machine may only be used when it has been built in. It can only be used in areas with an ambient temperature of +15 °C to +60 °C. You will need two Allen keys (size 3 and 5) for in ...
-
Miele CVA5060 - page 73
Adjusting the door hinges If the machine door becomes difficult to open or close after installation you can adjust the hinges to realign it: ^ To adjust the door in direction a , turn screw a . ^ To adjust the door forwards or backwards (direction b ), turn screw b . Installation 73 ...
-
Miele CVA5060 - page 74
74 ...
-
Miele CVA5060 - page 75
75 ...
-
Miele CVA5060 - page 76
Alteration rights reserved / 1509 CVA 5060, CVA 5068 M.-Nr. 07 611 170 / 00 ...
Do you have a question concerning Miele CVA5060?
Use the form below
If you did not solve your problem by using a manual Miele CVA5060, ask a question using the form below. If a user had a similar problem with Miele CVA5060 it is likely that he will want to share the way to solve it.