Manual White Rodgers 1F90W-51

8 pages 0.08 mb
Download

Go to site of 8

Summary
  • White Rodgers 1F90W-51 - page 1

    PART NO. 37-5089A 9139 Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION This wall-mounted, low voltage thermostat maintains room temperature by controlling the operation of heating and co ...

  • White Rodgers 1F90W-51 - page 2

    2 SPECIFICA TIONS ELECTRICAL DATA Electrical Rating: 17 to 30v AC 50/60 Hz. 0.05 to 1.5 Amps 1.5 Amps Maximum Total Load (All terminals combined) Anticipation: Heating 2 to 40 Cooling 4 to 40 THERMAL DATA Setpoint Temperature Range: 40 ° F to 99 ° F (4 ° C to 37 ° C) Operating Ambient Temperature Range: 32 ° F to 105 ° F Operating Humidity Ra ...

  • White Rodgers 1F90W-51 - page 3

    3 REPLACEMENT INST ALLA TION REMOVE OLD THERMOSTAT 1. Shut off electricity at the main fuse box until installa- tion is complete. Verify power is off with a voltmeter. 2. Remove the front cover of the old thermostat. With wires still attached, remove wall plate from the wall. 3. If the old thermostat has a wall mounting plate, remove the thermostat ...

  • White Rodgers 1F90W-51 - page 4

    4 All wiring diagrams are for typical systems only. Refer to equipment manufacturers' instructions for specific sys- tem wiring information. To prevent electrical shock and/or equipment damage, disconnect electrical power at the main fuse box or circuit breaker until installation is complete. NOTE CAUTION ! RC Y 24vAC 120vAC Hot Neutral THERMO ...

  • White Rodgers 1F90W-51 - page 5

    5 To attach thermostat to subbase, line up the plastic snap guides at the bottom of the thermostat and the three connector pins on the thermostat with the connectors near the bottom left section of the subbase (when viewed from the front). Gently pivot the thermostat up until the six pin connectors and the plastic snaps lock into place (see fig. 9) ...

  • White Rodgers 1F90W-51 - page 6

    6 SYSTEM CONFIGURA TION ELECTRIC HEAT SYSTEMS For central electric heat systems where the blower is energized by a separate circuit through the fan relay (meaning that the fan turns on immediately on call for heat), clip wire W14 on the back of the thermostat (see fig. 10). If the thermostat is energizing electric heat sequenc- ers, DO NOT clip wir ...

  • White Rodgers 1F90W-51 - page 7

    7 LOCKOUT BYPASS OPTION FOR QUALIFIED SERVICE TECHNICIANS’ USE ONLY. OPERATORS SHOULD NOT USE THIS FEATURE DUE TO POSSIBILITY OF EQUIPMENT OR PROPERTY DAMAGE, OR PERSONAL INJURY. COMPRESSOR SHORT TERM CYCLE PROTECTION This thermostat has a built-in short term (5-minute) time delay. During this 5-minute period, the thermo- stat will lock out the c ...

  • White Rodgers 1F90W-51 - page 8

    WARRANTY INFORMATION THIS WARRANTY STATEMENT SUPERSEDES ALL WARRANTY STATEMENTS DATED PRIOR TO MARCH 1, 1988. White-Rodgers Division of Emerson Electric Co. (“Seller”) war- rants that its products purchased for resale (the “Products”) will be free from defects in material and workmanship under normal use and service for a period of twelve ( ...

Manufacturer White Rodgers Category Compact Loader

Documents that we receive from a manufacturer of a White Rodgers 1F90W-51 can be divided into several groups. They are, among others:
- White Rodgers technical drawings
- 1F90W-51 manuals
- White Rodgers product data sheets
- information booklets
- or energy labels White Rodgers 1F90W-51
All of them are important, but the most important information from the point of view of use of the device are in the user manual White Rodgers 1F90W-51.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals White Rodgers 1F90W-51, service manual, brief instructions and user manuals White Rodgers 1F90W-51. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product White Rodgers 1F90W-51.

A complete manual for the device White Rodgers 1F90W-51, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use White Rodgers 1F90W-51 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of White Rodgers 1F90W-51.

A complete White Rodgers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual White Rodgers 1F90W-51 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the White Rodgers 1F90W-51, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the White Rodgers 1F90W-51, that we can find in the current document
3. Tips how to use the basic functions of the device White Rodgers 1F90W-51 - which should help us in our first steps of using White Rodgers 1F90W-51
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with White Rodgers 1F90W-51
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of White Rodgers 1F90W-51 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning White Rodgers 1F90W-51?

Use the form below

If you did not solve your problem by using a manual White Rodgers 1F90W-51, ask a question using the form below. If a user had a similar problem with White Rodgers 1F90W-51 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)