English dropdown-ico

Manual Runco XP-50DHDxa

82 pages 2.98 mb
Download

Go to site of 82

Summary
  • Runco XP-50DHDxa - page 1

    XP-50DHD / XP-50DHDxa XP-65DHD / XP-65DHDxa XP-103DHD High Definition, 1080p Flat Panel Plasma Display with and Digital High Definition TM Controller with Vivix II TM Technology TM I NSTALLATION /O PERATION M ANUAL ...

  • Runco XP-50DHDxa - page 2

    ...

  • Runco XP-50DHDxa - page 3

    PlasmaWall XP Series Installa tion/Operation Manual iii PRE L IMINAR Y THREE YEAR LIMITED WARRANTY For Plasma Displays from Runco International, LLC (“Runco”) Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! With prop er installation, se tup and care, yo u should enjoy many years of unpara lleled vi ...

  • Runco XP-50DHDxa - page 4

    iv PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y from coverage unde r this Limite d Warranty. CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNC O PRODUCTS PURCHASED FROM AUTHORIZED RUNCO DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECT LY FROM ...

  • Runco XP-50DHDxa - page 5

    PlasmaWall XP Series Inst allation/Operat ion Manual v PRE L IMINAR Y © Copyright 200 8 Runco Internat ional, LLC (“Run co”). This documen t contains prop rietary inform ation prote cted by copyri ght, trademark a nd other intellect ual prop erty laws. All right s are reser ved. No part of this manua l may be re produced b y any mechanical, el ...

  • Runco XP-50DHDxa - page 6

    vi PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video prod uct! It has been desig ned to provide yo u with the quality of vide o that is exp ected in a home the ater. For th e best perfo rmance, p lease read this man ual carefully as it is your guide through the menus and oper ...

  • Runco XP-50DHDxa - page 7

    PlasmaWall XP Series Insta lla tion/Operation Manual vii PRE L IMINAR Y Manufacturer’s Name: Run co Internation al, LLC Manufacture r’s Address: 119 5 NW Compto n Drive, Beaverto n, OR 97006 -1992 hereby declare s that the Prod ucts’ Model Number s: XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65 DHDxa and XP-103DHD conform with th e provisions of: Cou ...

  • Runco XP-50DHDxa - page 8

    viii PlasmaWall XP Seri es In stallation/Operation Manual PRE L IMINAR Y NOTE: This equipment ha s been tes ted and found to comply w ith the limits fo r a Class B d igital device , pursuant to Part 15 o f the FCC Rules. T hese limits are designed to provide reas onable protect ion against har mful interference in a residential installation. This e ...

  • Runco XP-50DHDxa - page 9

    PlasmaWall XP Series Insta lla tion/Operation Manual ix 1 Table of Content s PRE L IMINAR Y THREE YEAR LIMITED WARRANTY ............... ................ ................ ................ .............. iii Important S afety In s truction s .......................... ............. ............. ................ ............. ....... vi Compliance In ...

  • Runco XP-50DHDxa - page 10

    x P lasmaWall XP Series Inst allation/Operation Manual PRE L IMINAR Y Other Cons iderations .................. ............. ............. ................ ............. ............. ...... 21 Connections t o the PlasmaWall a nd DHD Controller ......................... ................ .......... 2 2 Connecting th e PlasmaWall to the DH D Controll ...

  • Runco XP-50DHDxa - page 11

    PlasmaWall XP Series Insta lla tion/Operation Manual xi 1 Li s t of Figure s PRE L IMINAR Y 2-1. PlasmaWall XP-50 DHD Front-Pane l Controls and Indicators ...................... ................ .. 5 2-2. PlasmaWall XP-65 DHD Front-Pane l Controls and Indicators ...................... ................ .. 5 2-3. PlasmaWall XP-10 3DHD Front -Panel Co ...

  • Runco XP-50DHDxa - page 12

    List of Figures xii PlasmaWall XP Series In stallation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50DHDxa - page 13

    PlasmaWall XP Series Inst allation/Operat ion Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manu al describes how to install, set up and operate a Run co PlasmaWall XP Series Flat-Panel Plasm a Display Monitor a nd DHD Controller (Mo del XP-50DHD, XP-50DHDxa, XP-65DHD, XP-6 5DHDxa or XP-103DHD). Throughout th is manual, the Runco Pla ...

  • Runco XP-50DHDxa - page 14

    Introduc tion 2 PlasmaW all XP Series Inst allation/Operation Manual PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous plac es througho ut the manual, to emp hasize points that you mu st keep in mind to avoid proble ms with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic info ...

  • Runco XP-50DHDxa - page 15

    Introd uction PlasmaWall XP Series Inst allation/Operat ion Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The PlasmaWa ll XP Series F lat-Panel Plasma Disp lay Monitor and DHD Controller establish a highe r threshold for flat panel dis play products. T he PlasmaWall XP Ser ies is available in three sizes, including our largest and ...

  • Runco XP-50DHDxa - page 16

    Introduc tion 4 PlasmaW all XP Series Inst allation/Operation Manual PRE L IMINAR Y Parts List Your PlasmaWall is shipped with the follow ing items. If any items are m issing or damaged, please contact y our Runco de aler or Runco C ustomer Service at (800) 23-RUNCO . • PlasmaWall XP Ser ies Flat-Panel Plasm a Display Monitor a nd DHD Controlle r ...

  • Runco XP-50DHDxa - page 17

    PlasmaWall XP Series Inst allation/Operat ion Manual 5 PRE L IMINAR Y 2.1 PlasmaWall at a Glance Controls and Indicators Figure 2-1, Fig ure 2-2 an d Figure 2 -3 show the PlasmaWall front-panel co ntrols and indicators. Figure 2-1. Pla s maWall XP-50DHD Front-Pan el Control s and Indicator s Figure 2-2. Pla s maWall XP-65DHD Front-Pan el Control s ...

  • Runco XP-50DHDxa - page 18

    Controls and Functions 6 PlasmaW all XP Series Inst allation/Operation Manual PRE L IMINAR Y Figure 2-3. Pla s maWa ll XP-103DHD Front-Pa nel Control s and Indica tor s 1. DI S PLA Y S TA N D Optional accessory for table-top installations. 2. POWER BUTTON Connects or disc onnects th e display pan el from the AC power sourc e. 3. S T ANDBY/ON INDICA ...

  • Runco XP-50DHDxa - page 19

    Controls and Functi ons PlasmaWall XP Series Inst allation/Operat ion Manual 7 PRE L IMINAR Y Connectors Figure 2-4 sho ws the rear-pane l connector lo cations on the PlasmaWall. Figure 2-4. Pla s maWall Rear Panel SERIAL PC IN AUDIO SLOT1 SLOT2 AV IN AB XP-50DHD 1 2 3 4 5 XP-65DHD XP-103DHD 5 5 ...

  • Runco XP-50DHDxa - page 20

    Controls and Functions 8 PlasmaW all XP Series Inst allation/Operation Manual PRE L IMINAR Y 1. S LOT 1 Not used. 2. S LOT 2 (Dual HDMI input) HDCP-compliant digital video inputs. Connect th e HDMI output f rom the DHD Controller to input “A” in thi s s lot. 3. PC IN Not used. 4. R S -232C (9-pin , male D- S ub) Connect the RS-232 OUT port o n ...

  • Runco XP-50DHDxa - page 21

    Controls and Functi ons PlasmaWall XP Series Inst allation/Operat ion Manual 9 PRE L IMINAR Y 5. UP BUTTON Used to direct selec t aspect ratios or mo ve the menu curs or up in the OSD. When n o menu is prese nt on-scre en, the UP button to ggles throug h aspect ratio s in the following order: 16:9 - 4:3 - Letterbo x - VirtualWide - Cinema 6. LEF T ...

  • Runco XP-50DHDxa - page 22

    Controls and Functions 10 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 2.3 DHD Controller Rear Panel Figure 2-6 show s the rear connec tor panel on th e DHD Controller . Figure 2-6. DHD Controller Rear Panel Outputs 1. HDMI OUT Connect this t o the S LOT 2 input on th e PlasmaWall (s ee Figure 2-4 ). Inputs 2. HDMI 1 / HDMI 2 ( ...

  • Runco XP-50DHDxa - page 23

    Controls and Functi ons PlasmaWall XP Series Inst allation/Operation Manual 11 PRE L IMINAR Y 8. ComLink (R S -232) OUTPUT Connect this to the ComLink (RS-232) input on t he projector , using the pr ovided communication cable. 9. IR Wired input from a wired remote con trol or infrare d receiver. It is a 3.5-mm, mini phono jack, wired as follows: Ri ...

  • Runco XP-50DHDxa - page 24

    Controls and Functions 12 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 2.4 DHD Controller Remote Control Figure 2-7 sho ws the DHD Co ntroller re mote contro l, and the pa ragraphs that follow describe its fun ctionality. Figure 2-7. DHD Controller Remote Co ntrol CUST 1 THX SVC HDMI 1 HDMI 2 EXIT RETURN 16 : 9 4 : 3 (not avail ...

  • Runco XP-50DHDxa - page 25

    Controls and Functi ons PlasmaWall XP Series Inst allation/Operation Manual 13 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is p ressed to in dicate that an IR signal is be ing trans mitted. 2. ON / OFF Press to turn the Pla smaWall on or off. 3. ENTER Press to select a highlighte d menu item or co nfirm a change d setting. 4. Cur s ...

  • Runco XP-50DHDxa - page 26

    Controls and Functions 14 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 10. A s pect Ratio S election Button s Use the red but tons to select an aspect ratio directly o r to enter n umeric characte rs, as follows: 16 : 9 (3) For viewing 16:9 DVDs or HDT V program s in their n ative aspect ratio. 4 : 3 (6) Scales the input signal ...

  • Runco XP-50DHDxa - page 27

    PlasmaWall XP Series Inst allation/Operation Manual 15 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover and pull the cove r in the dire ction of the arrow. 2. Insert th e included batte ries. Ensure that the polaritie s correctly match the and markings in side the ba ttery compartm en ...

  • Runco XP-50DHDxa - page 28

    Installation 16 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y • Do not dr op the remo te control o r expose it to moisture o r high temp erature. • The remote co ntrol may malfunct ion under a fluore scent lamp. If that oc curs, move the plasma display away f rom the fluorescen t lamp. • Make sure that there is nothing ob ...

  • Runco XP-50DHDxa - page 29

    Installation PlasmaWall XP Series Inst allation/Operation Manual 17 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick ove rview of the PlasmaWa ll installation proc ess. The sections following this one pr ovid e detailed ins tructions . Installation shou ld be performed by a quali fied custom video installation specialist. Table 3-1. In s tall ...

  • Runco XP-50DHDxa - page 30

    Installation 18 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your PlasmaWall will ensure the highest possi bl e picture quality. Whether you a re installi ng the PlasmaWall temporarily or permanent ly, you should take the following into account to ensure tha t it performs o ...

  • Runco XP-50DHDxa - page 31

    Installation PlasmaWall XP Series Inst allation/Operation Manual 19 PRE L IMINAR Y You can attac h your optional m ounts or sta nd to the PlasmaW all in either of two way s: • While it is upright. • As it lies flat wi th the scree n face down. Place the pr otective sheet, which was wr apped aro und the plasma monitor when it was packaged, b etw ...

  • Runco XP-50DHDxa - page 32

    Installation 20 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Figure 3-2. Ventila tion Requirement s for Enclo s ure Mounting (XP-50DHD and XP-65DHD) Figure 3-3. Ventila tion Requirement s for Enclo s ure Mounting (XP-103DHD) 50 mm (2") 50 mm (2") 50 mm (2") W all W all 50 mm (2") 50 mm (2") 300mm (11.8& ...

  • Runco XP-50DHDxa - page 33

    Installation PlasmaWall XP Series Inst allation/Operation Manual 21 PRE L IMINAR Y Other Considerations Here are some other co nsiderations and tip s that can help improv e your installation, avoid damage and prolo ng operating life: • Keep the amb ient temperatu re constant and below 35°C (95°F). Ke ep the display away from heating an d/or air ...

  • Runco XP-50DHDxa - page 34

    Installation 22 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 3.4 Connections to the PlasmaWall and DHD Controller Proceed as follo ws to connect the PlasmaWall to th e DHD Controller, your video sources, external cont roller(s) – if present – and AC p ower. When connec ting your equip ment: • Turn off all eq uipment befor ...

  • Runco XP-50DHDxa - page 35

    Installation PlasmaWall XP Series Inst allation/Operation Manual 23 PRE L IMINAR Y R S -232 Connection: Connect the RS-232 ou tput from th e DHD Controller to the S ERIAL input on th e PlasmaWall. Use a standard, modular telep hone cable w ith RJ11 plugs at both ends. On the PlasmaWall end , use the provided RJ11-to-DB9 ad apter. This adapter is wi ...

  • Runco XP-50DHDxa - page 36

    Installation 24 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controlle r as shown and describe d in the sections th at follow. HDMI Connection s : See Figure 3- 6. Figure 3-6. HDMI S ource Connectio n s ➤ Use the HDMI inpu ts whenever p ...

  • Runco XP-50DHDxa - page 37

    Installation PlasmaWall XP Series Inst allation/Operation Manual 25 PRE L IMINAR Y Digital (DTV) RGB Connection s : See Figure 3- 7. Figure 3-7 . Digital ( DTV) RGB Co nnection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 DTV or Progressive Component (YPbPr) Source ...

  • Runco XP-50DHDxa - page 38

    Installation 26 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Analog (Computer) RGB Connec tion s : See Figure 3-8. Figure 3-8. Analog RGB Connection s 1. Refer to PlasmaWall Specificatio ns on page 61 for a list of computer si gnals compatible wit h the PlasmaWall. Use with signals other t han those list ed may cause some funct ...

  • Runco XP-50DHDxa - page 39

    Installation PlasmaWall XP Series Inst allation/Operation Manual 27 PRE L IMINAR Y Compo s ite/ S -Video/Component Video Connection s : See Figure 3- 9. Figure 3-9. Compo s ite, S -Video and Com ponent Video Connection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 D ...

  • Runco XP-50DHDxa - page 40

    Installation 28 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y RS-232 Controller Connection Use a standard, 9 -pin RS-232 cable t o connect a PC or h ome theater control/auto mation system (if present) to the RS-232 Cont rol port on the DHD Controller; see Figure 3-10 . For more information about using this c onnection, refer to ...

  • Runco XP-50DHDxa - page 41

    Installation PlasmaWall XP Series Inst allation/Operation Manual 29 PRE L IMINAR Y Connecting an External IR Receiver to the DHD Controller If infrare d signals from th e remote contro l cannot reac h the DHD Controlle r due to excessive dista nce or obstr uctions such as walls or cabi net doors, you can conn ect an external IR rece iver to the DHD ...

  • Runco XP-50DHDxa - page 42

    Installation 30 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Connecting AC Power Plug the female end of th e power cord into the AC rec eptacle on the rear of the PlasmaWall. Conne ct the other end to your AC power source . (The XP-103D HD requires 200-240 VAC.) Figure 3-13. AC Power Con nection Similarly connect th e DHD Contr ...

  • Runco XP-50DHDxa - page 43

    Installation PlasmaWall XP Series Inst allation/Operation Manual 31 PRE L IMINAR Y Cable Management To reduce c able clutter , use the cable c lamps provided with the Plasma Wall to bundle t he video, audio a nd control c ables at the b ack of the disp lay. Install the clamps as show n in Figure 3-14 . Figure 3-14. Cable Management 1 3 2 1 2 Using ...

  • Runco XP-50DHDxa - page 44

    Installation 32 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50DHDxa - page 45

    PlasmaWall XP Series Inst allation/Operation Manual 33 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source co mponents. 2. Press the main power s witch on the Pla smaWall (see Figure 2-1 , Figure 2-2 or Fi gure 2-3 ). The st andby/on ind icator lights green. 3. Set the main power swit ch at the rear of the DHD Controller (se e Figure 2-6 ...

  • Runco XP-50DHDxa - page 46

    Operation 34 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 2. Double c lick on th e Di s play icon. 3. Click the S etting s tab on the display dial og box. 4. Set the S cr een are a to 1024x768 pixels. 5. Click the Advanced button and click the Monitor tab on the dia log box. Set the Refre s h Fr equency to 60Hz and click OK . 1 ...

  • Runco XP-50DHDxa - page 47

    Operation PlasmaWall XP Series Inst allation/Operation Manual 35 PRE L IMINAR Y 4.3 Using the DHD Controller Menus Press the MENU button on either the rem ote control or the DHD Contr oller front panel to display the Main Me nu. To select a me nu item, use the UP ( ) and DOWN ( ) buttons on either the remote cont rol or the DHD Co ntroller front pa ...

  • Runco XP-50DHDxa - page 48

    Operation 36 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Figure 4-1. DHD Co ntroller O S D Menu S tructure for Pla s maWall S ervice Test Vide o Grey Bars 1 Grey Bars 2 Color Bars 1 Color Bars 2 Input Names Rename, Restor e or Save Remote Control Primary Secondar y Display Device Display Position Left/Right , Up/Down, W idth, ...

  • Runco XP-50DHDxa - page 49

    Operation PlasmaWall XP Series Inst allation/Operation Manual 37 PRE L IMINAR Y Main Menu The Main Me nu is the sta rting point for accessing all d i splay functions. (The Calibration and Service m enus are hidd en and not accessible until you enter a passcode.) Input Source From the M ain Menu, selec t Input So urce to cho ose a video sig nal sour ...

  • Runco XP-50DHDxa - page 50

    Operation 38 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription 16:9 16:9 Select 1 6:9 to vi ew 16:9 D VDs and HDTV programs in their native aspec t ratio. 4:3 images are stretched hori - zontally to fit a 16:9 screen. 4:3 4:3 4:3 scales the input si ...

  • Runco XP-50DHDxa - page 51

    Operation PlasmaWall XP Series Inst allation/Operation Manual 39 PRE L IMINAR Y Picture Use the contro ls in the Picture Me nu to calibra te the analog inpu ts on the PlasmaWall for optimum picture qu ality. The PlasmaWall has be en designed to incorporate set up and calibrati on standards establishe d by the Imaging Science Foundation (ISF ). The ...

  • Runco XP-50DHDxa - page 52

    Operation 40 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y PLUGE patterns v ary but ge nerally consist of some com bination of black, white and gray areas against a bla ck background . The example above include s two vertical bar s and four shaded boxes. Select Brightness fro m the Picture m enu and press ENTER . Adjust the brig ...

  • Runco XP-50DHDxa - page 53

    Operation PlasmaWall XP Series Inst allation/Operation Manual 41 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patt ern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color and press ENTER . While looking at the color bar patt ...

  • Runco XP-50DHDxa - page 54

    Operation 42 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the im age. To adjust sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, se lect a patte rn like the o ne shown in Figure 4-5 . Adjust as ne ...

  • Runco XP-50DHDxa - page 55

    Operation PlasmaWall XP Series Inst allation/Operation Manual 43 PRE L IMINAR Y Over s can: Image Overscan push es the outsid e edge of the act ive picture ar ea of the video signal out beyond the edge of the display area. Some television programs ar e produced based on th e assumption that older television sets may not d isplay the outer edge s of ...

  • Runco XP-50DHDxa - page 56

    Operation 44 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Calibration Use the Calibration men u to perform advance d picture quality adjust ments on the analog inputs. Thi s menu s hould be u s ed by I S F-certif ied technician s only . To recall the ISF N ight or ISF Da y settings, se lect “ISF Night” or “ISF Day” from ...

  • Runco XP-50DHDxa - page 57

    Operation PlasmaWall XP Series Inst allation/Operation Manual 45 PRE L IMINAR Y I S F Night - Input Color: The Input Color controls are simila r to those in the Display Color menu (see above ), but adjust th e color balance at the DHD Controller (a s opposed to the display device). The se settings a re also saved inde pendently for each input. •G ...

  • Runco XP-50DHDxa - page 58

    Operation 46 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y • Runco/I S F Logo S pla s h S cr een Timer s : When you turn on the Plasma Wall, it projects a welco me screen with the Runco lo go followed b y one with the ISF logo. Select Splash Timer from the Splash Configure men u to set the a mount of time that these two im age ...

  • Runco XP-50DHDxa - page 59

    Operation PlasmaWall XP Series Inst allation/Operation Manual 47 PRE L IMINAR Y Remote Control: The Remote Control menu sh ows you the p rimary and seco ndary infrared (IR) code s to which the DHD Controlle r will respond . By default, b oth are set to 17. You can chang e these codes if either: • Another de vice in the thea ter (a DVD play er, fo ...

  • Runco XP-50DHDxa - page 60

    Operation 48 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Di s play Devi ce: The opti ons in the Display Device menu allow you to per form certain adjustments a t the plasma d isplay. • Di s play Po s ition: Select Display Position from the Display De vice menu to per form the following disp lay device adjustm ents (these are ...

  • Runco XP-50DHDxa - page 61

    Operation PlasmaWall XP Series Inst allation/Operation Manual 49 PRE L IMINAR Y HD Format: If the characteristic s of the in coming signal on the HD1 or HD2 inpu ts are known, select HD Fo rmat from the Service menu and se t them as described below. Doing so can reduce the time it t akes the DHD Contr oller to switch f rom HD to 480i signals or vic ...

  • Runco XP-50DHDxa - page 62

    Operation 50 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y S y s tem Re s et: To reset ALL DHD Controller settings (including image setting s) back to their factory defaul ts, choose System Reset from th e Service menu. A confirmation messa ge appears, remindin g yo u to save your setting s before you perf orm the reset, so that ...

  • Runco XP-50DHDxa - page 63

    PlasmaWall XP Series Inst allation/Operation Manual 51 PRE L IMINAR Y 5.1 Cleaning Regular cleaning will extend the life and performan ce of the Pla smaWall. Befor e cleaning, be sure to u nplug the p ower cord from the po wer outlet . Cleaning the Display Panel Body and Rem ote Control Do not under any circumsta nces use solven ts such as b enzene ...

  • Runco XP-50DHDxa - page 64

    Maintenance and Troublesh ooting 52 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshooting pr oblems you may encounter w ith the Plasma Wall. If the sugge sted solution s fail to resolve t he problem or if you encounter an issue not d escribed here ...

  • Runco XP-50DHDxa - page 65

    Maintenance and Troubleshooting PlasmaWall XP Series Inst allation/Operation Manual 53 PRE L IMINAR Y RGB-HD images appear “noisy.” • Clock and Phase settings need adjustment. • Adjust Cl ock and Phase settings (refer to ISF Night - Input Color on page 45 ). Computer images do not dis - play correctly. • The resolution and frequency of th ...

  • Runco XP-50DHDxa - page 66

    Maintenance and Troublesh ooting 54 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50DHDxa - page 67

    PlasmaWall XP Series Inst allation/Operation Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the PlasmaWall with a home th eater automation/contr ol system or a PC running te rminal emula tion software, connect it to the RS-2 32 output o f the DHD Controller as show n in Figure 3- 5 . Connect your cont rol system ...

  • Runco XP-50DHDxa - page 68

    Serial Communications 56 PlasmaWall XP Series Installation/Operation Manual P RELI M INARY Table 6-1 lists the RS-232 comm and set. The “Parameter (min /max)” column shows the valid parameter ranges, or “NA” for comman ds that take no para meters. When you enter a valid comma nd, the DHD Controller exec utes it and acknowledg es it with a p ...

  • Runco XP-50DHDxa - page 69

    Serial Communications PlasmaWall XP Series Inst allation/Operation Manual 57 PRE L IMINAR Y Picture Adju s t Command s (not available on HDMI 1 or HDMI 2 input s ) BRIGHTNESS -100/100 YES Sets a value for brightness BRIGHTNESS? NA NA Returns brightness setting value CHROMADELAY -12/12 YES Sets a value for input color chroma delay CHROMADELAY? NA NA ...

  • Runco XP-50DHDxa - page 70

    Serial Communications 58 PlasmaWall XP Series Installation/Operation Manual P RELI M INARY Input Po s ition Command s (not available on HDMI 1 or HDMI 2 input s ) IHEIGHT -100/100 YES Sets the value for input height IHEIGHT? NA NA Returns input height value IHPOS -100/100 YES Sets a value for hori zontal input position IHPOS? NA NA Returns input h ...

  • Runco XP-50DHDxa - page 71

    Serial Communications PlasmaWall XP Series Inst allation/Operation Manual 59 PRE L IMINAR Y Mi s cellaneou s Command s (not available on HDMI 1 or HDMI 2 input s ) BKGND -100/100 YES Sets the background color for 4:3 aspect ratio (-100 = black; 100 = white) BKGND? NA NA Returns background setting value DATE? NA NA Returns product manu facture date ...

  • Runco XP-50DHDxa - page 72

    Serial Communications 60 PlasmaWall XP Series Installation/Operation Manual P RELI M INARY The following serial commands a re meant to emul ate buttons on the remote contro l or DHD Con - troller front panel. Each button has its own serial command, so effe ctively it is as if you were using the IR remote only you’ll be doing so via se rial comman ...

  • Runco XP-50DHDxa - page 73

    PlasmaWall XP Series Inst allation/Operation Manual 61 PRE L IMINAR Y 7.1 PlasmaWall Specifications Table 7-1 lists the Plas maWall specifications. 7. S pecification s Table 7-1. Pla s maWall S pecification s Native Re s olution: 1920 x 1080 S creen S ize: XP-50DHD / XP-50DHD x a: 43.50 in. W x 24.50 in. H (1104.9 x 622.3 mm) 50 in. (1270.0 mm) dia ...

  • Runco XP-50DHDxa - page 74

    Specifications 62 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Controller specifications. Limited Warranty: Three (3) years parts and labor from the date of delivery to the end user (except for plasma glass panel). Plasma Glass Panel: One (1) ye ar parts and labor from t ...

  • Runco XP-50DHDxa - page 75

    Specifications PlasmaWall XP Series Inst allation/Operation Manual 63 PRE L IMINAR Y 7.3 PlasmaWall Dimensions Figure 7-1, Fig ure 7-2 and F igure 7-3 sh ow the Pla smaWall dimen sions (all dime nsions are in inches). Figure 7-1. Pla s maWall Model XP-50DHD Dimen s ion s (with Optional Table S tand) 30.000 50.420 34.000 8.122 4.566 3.490 15.500 0 8 ...

  • Runco XP-50DHDxa - page 76

    Specifications 64 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Figure 7-2. Pla s maWall Model XP-65DHD Dimen s ion s (with Optio nal Table S tand) 0 1.7 2.5 35.0 37.5 1.1 18.7 0 7.4 8.8 10.0 31.2 62.3 59.8 2.5 65.4 17.0 7.0 4.5 2.1 4.1 5.6 4.5 2.1 0 1.7 12.0 25.1 30.4 37.5 9.0 0 10.3 52.3 43.0 18.5 62.3 2.3 60.0 ...

  • Runco XP-50DHDxa - page 77

    Specifications PlasmaWall XP Series Inst allation/Operation Manual 65 PRE L IMINAR Y Figure 7-3. Pla s maWall Model XP-103DHD Dimen s ion s (with Floor S tand) 5.25 34.30 16.00 1.45 6.50 89.38 59.50 96.13 50.75 102.50 42.30 69.40 ...

  • Runco XP-50DHDxa - page 78

    Specifications 66 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y 7.4 Supported Timings Table 7-3 lists the s ignal types supp orted by eac h input on the DHD Contr oller. Table 7-3. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pi x el Frequency (MHz) S upported? ( √ = ...

  • Runco XP-50DHDxa - page 79

    Specifications PlasmaWall XP Series Inst allation/Operation Manual 67 PRE L IMINAR Y PAL-N – 50.00 15.625 3.580 √ – √ √ √ PAL-60 – 59.94/60.00 15.734/15.750 4.430 √ – √ √ √ Table 7-3. S upported S ignal Timin g s by Input (continued) Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pi x el Frequency (MHz) S ...

  • Runco XP-50DHDxa - page 80

    Specifications 68 PlasmaWall XP Series Installation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco XP-50DHDxa - page 81

    ...

  • Runco XP-50DHDxa - page 82

    Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com SERIAL NUMBER 020-0726-01 re v. A January 20 08 ...

Manufacturer Runco Category Flat Panel Television

Documents that we receive from a manufacturer of a Runco XP-50DHDxa can be divided into several groups. They are, among others:
- Runco technical drawings
- XP-50DHDxa manuals
- Runco product data sheets
- information booklets
- or energy labels Runco XP-50DHDxa
All of them are important, but the most important information from the point of view of use of the device are in the user manual Runco XP-50DHDxa.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Runco XP-50DHDxa, service manual, brief instructions and user manuals Runco XP-50DHDxa. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Runco XP-50DHDxa.

Similar manuals

A complete manual for the device Runco XP-50DHDxa, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Runco XP-50DHDxa by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Runco XP-50DHDxa.

A complete Runco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Runco XP-50DHDxa - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Runco XP-50DHDxa, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Runco XP-50DHDxa, that we can find in the current document
3. Tips how to use the basic functions of the device Runco XP-50DHDxa - which should help us in our first steps of using Runco XP-50DHDxa
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Runco XP-50DHDxa
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Runco XP-50DHDxa in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Runco XP-50DHDxa?

Use the form below

If you did not solve your problem by using a manual Runco XP-50DHDxa, ask a question using the form below. If a user had a similar problem with Runco XP-50DHDxa it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)