English dropdown-ico

Manual Barco R5975039

50 pages 2.58 mb
Download

Go to site of 50

Summary
  • Barco R5975039 - page 1

    OWNER'S MANUAL R9002130 R9002139 VISION 508 ...

  • Barco R5975039 - page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, December 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visit Barco ...

  • Barco R5975039 - page 3

    BARCO PROJECTION SYSTEMS Date : 071298 OWNER'S MANUAL Rev : 02 Art. No. : R5975039 R9002130 R9002139 VISION 508 ...

  • Barco R5975039 - page 4

    Table of Contents i-1 5975039 BARCOVISION 508 100698 i T ABLE OF CONTENTS TABLE OF CONTENTS .......................................... I-1 SAFETY INSTRUCTIONS ...................................... 1-1 On safety .................................................................................... 1-1 On installation ................................. ...

  • Barco R5975039 - page 5

    Safety Instructions 1-1 5975039 BARCOVISION 508 120198 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC Rules. These limit ...

  • Barco R5975039 - page 6

    Safety Instructions 1-2 5975039 BARCOVISION 508 120198 A. Mains lead (Power cord) with CEE 7 plug : The wires of the mains lead are colored in accordance with the following code. Green and yellow:earth (safety earth) Blue: neutral Brown: line (live) B. Power cord with ANSI 73.11 plug : The wires of the power cord are colored in accordance with the ...

  • Barco R5975039 - page 7

    Location and Functions of Control 2-1 5975039 BARCOVISION 508 100698 2 LOCA TION AND FUNCTIONS OF CONTROL Rear Panel Terminology Communication port (800 peripherals)  allows communication between the RCVDS switcher and the projector.  allows connection of a remote IR receiver unit to the projector. IR Remote - Remote input for wired remote co ...

  • Barco R5975039 - page 8

    Location and Functions of Control 2-2 5975039 BARCOVISION 508 100698 Control panel terminology a. The local keypad Gaining access The local keypad is at the rear side of the projector. b. RCU control panel terminology This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely . Th ...

  • Barco R5975039 - page 9

    Location and Functions of Control 2-3 5975039 BARCOVISION 508 100698 BARCO key : When a RF-tuner is built in (option), this key used to toggle between Video and tuner signal. ADJ. : adjust key, to enter or exit the adjustment mode. Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the address key, followed b ...

  • Barco R5975039 - page 10

    Connections 3-1 5975039 BARCOVISION 508 120198 CONNECTIONS Power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the rear of the projector. The projector is switched ON and OFF using the power (mains) switch ON/OFF. Pressed : ON Not pressed ...

  • Barco R5975039 - page 11

    Connections 3-2 5975039 BARCOVISION 508 120198 Connecting a Composite Video source. Composite video signals from a VCR, OFF air signal decoder, etc.. Video input selection : a. with the RCU : press digit button 1 or b. with the local keypad. - press ADJUST key, the General access menu is displayed on the screen. - use the control disc to highlight ...

  • Barco R5975039 - page 12

    Connections 3-3 5975039 BARCOVISION 508 120198 Input selection a. with the RCU : press digit button 2 or b. with the local keypad. - press ADJUST key, the General access menu is displayed on the screen. - use the control disc to highlight 2 . - press ENTER to select the highlighted source. G E N E R A L A C C E S S S ele c t w ith , or th en < E ...

  • Barco R5975039 - page 13

    Connections 3-4 5975039 BARCOVISION 508 120198 Connecting a Component source. YUV analog input terminals with sync input or with sync on the luminance (Y) input. YsUV or YUVS input selection a. Press digit button 6 (for YsUV) or 7 (for YUVS) on the RCU or b. With the local keypad : - Press ADJUST key, the General access menu is displayed on the scr ...

  • Barco R5975039 - page 14

    Connections 3-5 5975039 BARCOVISION 508 120198 Connecting a RCVDS 05 switcher to the projector. - Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules. - Serial communication with the projector. - Remote control buttons on the RCVDS to control ...

  • Barco R5975039 - page 15

    Controlling 4-1 5975039 BARCOVISION 508 100698 4 CONTROLLING Battery installation in the RCU. A new battery is delivered inside the plastic bag with the power cord. Before using the RCU, install first the battery. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little to the bottom of the RCU. Lift u ...

  • Barco R5975039 - page 16

    Controlling 4-2 5975039 BARCOVISION 508 100698 The projector can be controlled with a. The RCU b. The hardwired RCU (cable not included) c. The local keypad. Controlling the projector with the RCU and the hardwired RCU is the same. How to use the RCU a) Point the front of the RCU towards the reflective screen surface b) Point the front of the RCU t ...

  • Barco R5975039 - page 17

    Controlling 4-3 5975039 BARCOVISION 508 100698 To continue using the RCU, it is necessary to enter an address with the digit buttons (address between 0 and 9). For example : if the Address key displays projector address 003, the press "3" digit button on the RCU to set the RCU's address to match the projector's address. Do not p ...

  • Barco R5975039 - page 18

    Controlling 4-4 5975039 BARCOVISION 508 100698 Picture controls The picture controls can be adjusted with : a) The RCU. The control keys are located on the left side of the key panel of the RCU and indicated with the name of the control and an icon. When an image control is pressed, a text box with bar scale and the function name of the control, e. ...

  • Barco R5975039 - page 19

    Controlling 4-5 5975039 BARCOVISION 508 100698 Sound control with the RCU (optional). Only available when the tuner option is installed. When an analog sound control is pressed, a bar scale and a number below the bar scale appear on the screen with name of the control, e.g. 'Volume' above it. The lenght of the bar scale and the number ind ...

  • Barco R5975039 - page 20

    Start Up of the Adjustment Mode 5-1 5975039 BARCOVISION 508 120198 ST ART UP OF THE ADJUSTMENT MODE Adjustment mode All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Two possible ways to enter the adjustment mode : a) Using the RCU. Press the ADJUST key. The projector displays the path selection men ...

  • Barco R5975039 - page 21

    Start Up of the Adjustment Mode 5-2 5975039 BARCOVISION 508 120198 RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments. SERVICE - Service should be selected if the user intends to delete blocks, change password or apply information. Some items in the Adjustment mode are password protected. While selec ...

  • Barco R5975039 - page 22

    Random Access Adjustment Mode 6-1 5975039 BARCOVISION 508 071298 RANDOM ACCESS ADJUSTMENT MODE Starting up the random access adjustment mode. Push the control disc up or down to highlight "RANDOM AC- CESS" and then press ENTER . Some items in the Random access mode are password protected (when the password function is enabled). Enter your ...

  • Barco R5975039 - page 23

    Random Access Adjustment Mode 6-2 5975039 BARCOVISION 508 071298 Selecting Setup Pattern If an external source is connected to the projector, this menu will be displayed. Push the control disc up or down to highlight the desired setup pattern and then press ENTER . Genlocked pattern : internally generated cross hatch pattern, locked on the external ...

  • Barco R5975039 - page 24

    Random Access Adjustment Mode 6-3 5975039 BARCOVISION 508 071298 Color Balance The Color Balance function is used to select or adjust the color temperature of white used by the projector. The Color Balance can be adjusted on two different ways : - fixed color balance. You have the choice between 3200 K (reddish), 4900 K, 6500 K (white) or 9300 K (b ...

  • Barco R5975039 - page 25

    Random Access Adjustment Mode 6-4 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE COLOR SELECT Geometry Adjustments The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other ...

  • Barco R5975039 - page 26

    Random Access Adjustment Mode 6-5 5975039 BARCOVISION 508 071298 Note : No horizontal phase adjustment is available on the internal # pattern. For external sources : If the raster shift is correctly adjusted, the H Phase text box is projected in the middle of the raster. At that moment, the "><" icon indicates the middle of the rast ...

  • Barco R5975039 - page 27

    Random Access Adjustment Mode 6-6 5975039 BARCOVISION 508 071298 Warning : In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the phosphor area of the CRT. f o r b id d e n a r e a p r o j e c t e d r a s t e r c r t fa c e p l a t e b o r d e r p h o s p h o r b o r d e r To start the adjustment, use ...

  • Barco R5975039 - page 28

    Random Access Adjustment Mode 6-7 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. LEFT-RIGHT (E-W) V CENTERLINE BOW V CENTERLINE SKEW BOW KEYSTONE Left-Right (east-west) Adjustments Left-right and center adjustments affect only the vertical lines of the projected image. Select with or then <ENTER> < ...

  • Barco R5975039 - page 29

    Random Access Adjustment Mode 6-8 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. Top-Bottom (north-south) Adjustments Top-Bottom and center adjustments affect only the horizontal lines of the projected image. To start up the Top-Bottom and center corrections, follow the next procedure : Push the control dis ...

  • Barco R5975039 - page 30

    Random Access Adjustment Mode 6-9 5975039 BARCOVISION 508 071298 Horizontal Size Adjustment Push the control disc up or down to highlight H SIZE on the Geometry menu and then press ENTER . ENTER will select horizontal size adjustment. EXIT returns to random access adjustment mode menu. ADJUST returns to operational mode. Adjust the horizontal size ...

  • Barco R5975039 - page 31

    Random Access Adjustment Mode 6-10 5975039 BARCOVISION 508 071298 Blanking Adjustments Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A 0% on the bar scale indicates no blanking. To start up the Blanking adjustment ...

  • Barco R5975039 - page 32

    Random Access Adjustment Mode 6-11 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. BLANKING TOP BOTTOM LEFT RIGHT Adjust the next blanking alignments until the image is correctly framed or the unwanted information is blanked out. To enter a blanking alignment, push the control disc up or down to highlight a ...

  • Barco R5975039 - page 33

    Random Access Adjustment Mode 6-12 5975039 BARCOVISION 508 071298 Convergence Adjustment Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on the red image while superimposed on the green image and then on the blue image while superimposed on the green image. Note : the green ...

  • Barco R5975039 - page 34

    Service Mode 7-1 5975039 BARCOVISION 508 120198 7 SERVICE MODE Starting up the Service mode. Use the control disc to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password protected items are now also avail ...

  • Barco R5975039 - page 35

    Service Mode 7-2 5975039 BARCOVISION 508 120198 Projector Set-up Highlight 'Projector Set-Up' by pushing the control disc up or down and press ENTER to display the projector set-up menu. Within the projector set-up menu, the fol- lowing items can be consultated or set to the desired setting : - Identification - Total run time - Change pas ...

  • Barco R5975039 - page 36

    Service Mode 7-3 5975039 BARCOVISION 508 120198 Total Run Time Highlight 'Total Run Time' with the control disc and press ENTER to display the amount of time the projector has played since its first start up at the factory. Note : all projectors leave the factory after a burn-in period of approximately 100 hours. Change password This item ...

  • Barco R5975039 - page 37

    Service Mode 7-4 5975039 BARCOVISION 508 120198 Change baudrate The communication speed between projector and computer has 8 possible speeds. The baud rate speed can be software set up. Highlight 'Change Baudrate' by pushing the control disc up or down and press ENTER to display the Baud rate menu. The following baud rates are available : ...

  • Barco R5975039 - page 38

    Service Mode 7-5 5975039 BARCOVISION 508 120198 Copy a block The copy a block function copies the settings of a selected block into the active block. Highlight copy a block with the control disc and press ENTER . ENTER will select the highlighted item. EXIT returns to the Path Selection main menu. ADJUST returns to the Operational mode. To copy the ...

  • Barco R5975039 - page 39

    Service Mode 7-6 5975039 BARCOVISION 508 120198 Select with or then <ENTER> <EXIT> to return. MEMORY MANAGEMENT COPY A BLOCK DELETE A BLOCK DELETE ALL BLOCKS ALL SETTINGS TO MIDPOS R & B CONVERGENCE MID GR CONVERGENCE MID Deletion of all blocks Highlight 'delete all blocks' with the control disc and press ENTER . ENTER giv ...

  • Barco R5975039 - page 40

    Service Mode 7-7 5975039 BARCOVISION 508 120198 R & B convergence mid Item is password protected. Highlight 'R & B convergence mid' with the control disc and press ENTER to set all convergence settings to their midposition. A confirmation screen will be displayed first. Select with or then <ENTER> <EXIT> to return. MEM ...

  • Barco R5975039 - page 41

    Service Mode 7-8 5975039 BARCOVISION 508 120198 Common Settings Highlight 'Common settings' by pushing the control disc up or down and press ENTER to display the common settings menu. Within the common settings menu, the following items can be set up or executed : - G2 adjustment - CRT run in cycle Select with or then <ENTER> <EX ...

  • Barco R5975039 - page 42

    Service Mode 7-9 5975039 BARCOVISION 508 120198 the CRT run in cycle will start when pressing ENTER. If no such a block is available, the projector cannot run the CRT run in option and leaves the adjustment mode. If you still want to run CRT run in cycle, create first a memory block on an internal # pattern and restart the CRT run in option. ENTER ...

  • Barco R5975039 - page 43

    Options 8-1 5975039 BARCOVISION 508 100698 IR Receiver 800 This infrared receiver unit makes it possible to control the projector from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS05. The control information from the RCU can now be sent to this IR receiver. The IR receiver 800 displays ...

  • Barco R5975039 - page 44

    Options 9-2 5975039 BARCOVISION 508 100698 Tuner kit With one of the four available tuner kits, it is possible to receive RF signals from a TV cable network or a TV antenna. The four kits are designed to fulfil the different broadcasting systems worldwide. Order number BG/L tuner : R9828590 Order number I tuner : R9828600 Order number MN tuner : R9 ...

  • Barco R5975039 - page 45

    Tuner Mode A-1 5975039 BARCOVISION 508 100698 A TUNER MODE Tuner mode With one of the four available tuner kits, it is possible to receive RF signals from a TV cable network or a TV antenna. The four kits are designed to fulfil the different Broadcasting systems worldwide. These kits are : How to activate the tuner mode ? 1. Using the RCU. Press th ...

  • Barco R5975039 - page 46

    Tuner Mode A-2 5975039 BARCOVISION 508 100698 The projector displays the General access menu . Use the control disk to highlight TUNER and press ENTER . The last selected channel will be displayed. To switch to another channel, push the control disc up or down. GE N ERA L ACCESS S ele c t with , o r then <ENTER >. <EXIT> to ret urn SHAR ...

  • Barco R5975039 - page 47

    Tuner Mode A-3 5975039 BARCOVISION 508 100698 Auto Search All channel information will be overwritten and the channel list will be reorganised completely. The projector scans the entire VHF and UHF band for the available TV frequencies. It starts in the lower frequency range and it stores each found frequency in another preselection in a consecutiv ...

  • Barco R5975039 - page 48

    Tuner Mode A-4 5975039 BARCOVISION 508 100698 Organise Channel List Once the TV frequencies are entered in the channel list, this list can be ordered according your own preferences. Highlight 'Organise Channel List' by pushing the control disc up or down and press ENTER to select. The channel list will be displayed. Select with or then &l ...

  • Barco R5975039 - page 49

    Tuner Mode A-5 5975039 BARCOVISION 508 100698 Teletext This teletext function is only available when operating in tuner mode. To enter the teletext mode, press the TEXT key. The following keys on the RCU has a function in the teletext mode : TEXT : a 3 way toggle key Telet ext OFF Video O N Te let ext ON Video OFF Teletext ON Vide o ON NUM key (0 . ...

  • Barco R5975039 - page 50

    Insert Card i-1 5975039 BARCOVISION 508 100698 3 INSERT CARD " ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco R5975039 can be divided into several groups. They are, among others:
- Barco technical drawings
- R5975039 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R5975039
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R5975039.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R5975039, service manual, brief instructions and user manuals Barco R5975039. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R5975039.

Similar manuals

A complete manual for the device Barco R5975039, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R5975039 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R5975039.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R5975039 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R5975039, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R5975039, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R5975039 - which should help us in our first steps of using Barco R5975039
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R5975039
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R5975039 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R5975039?

Use the form below

If you did not solve your problem by using a manual Barco R5975039, ask a question using the form below. If a user had a similar problem with Barco R5975039 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)