English dropdown-ico

Manual Toshiba LF410/LF602

16 pages 1.41 mb
Download

Go to site of 16

Summary
  • Toshiba LF410/LF602 - page 1

    No. EJL-114B Introduction The electromagnetic flowmeter uses Faraday’s Law of electromagnetic induction to measure the process flow. The device consists of two units: a detector, through which the fluid to be measured flows and in which low-level signals proportional to flow rates are obtained; and a converter, which supplies excitation current t ...

  • Toshiba LF410/LF602 - page 2

    LF410/LF600 LF410/LF602 2 Fluid conductivity: 5µS/cm minimum Fluid temperature: –10 to +180 ° C : Ceramic type (14 to 356 ° F) Note : 120 ° C (248 ° F) above is separate type –10 to +120 ° C : tefolon PFA (14 to 248 ° F) Ambient temperature: Without cFMus Approval: - 20 to + 60 °C ( - 4 to 140 °F) With cFMus Approval: -10 to +45° C (1 ...

  • Toshiba LF410/LF602 - page 3

    LF410/LF600 LF410/LF602 3 totalizer. Fixed-value outputs — Outputs fixed-values for current and pulse outputs. Zero adjustment — Executes zero adjust ment (on-stream at zero flow rate). Output signals Current output: 4–20mAdc (load resistance 0 to 750 Ω ) Note: The current output cannot be used with the PROFIBUS-PA ccommunication. Digital ou ...

  • Toshiba LF410/LF602 - page 4

    LF410/LF600 LF410/LF602 4 Cable connection ports: Cable glands — LF600 and LF602 without cFMus Approval: Provided as standard OD of cable φ 11 ~ 13mm Material Nylon 66 G (PF) 1/2 male screws. Note: When PROFIBUS option is specified , cable grands size is φ 6 ~ 8mm for signal cable, φ 11 ~ 13mm for power cable. LF600 and LF602 with cFMus Approv ...

  • Toshiba LF410/LF602 - page 5

    LF410/LF600 LF410/LF602 5 Installation  Dimensions Unit : mm L1 Φ D1 (L2) 64 143 (35) 225 131 BS16, DIN PN16 and JIS 10K dimensions: Meter size (mm) L1 (mm) L2 (mm) D1 (mm) Weight (kg) 15 70 252 49 approx. 5 Note: 1 inch = 25.4m m ANSI class 150 and class 300 dimensions: Meter size (inch) L1 (inch) L2 (inch) D1 (inch) Weight (lb) 1/2 2.76 9.92 ...

  • Toshiba LF410/LF602 - page 6

    LF410/LF600 LF410/LF602 6 Unit : mm (L2) L1 225 133 (35) 131 Φ D1 Note1: Eye bolts are provided at the top fo r flow mete rs sized 200mm (8"). BS16, DIN PN16 and JIS 10K dimensions Meter size (mm) L1 (mm) L2 (mm) D1 (mm) Weight (kg) 40 100 264 85 approx. 6 50 110 280 102 approx. 7 80 110* 306 127 approx. 8 100 120* 338 159 approx. 10 150 230 ...

  • Toshiba LF410/LF602 - page 7

    LF410/LF600 LF410/LF602 7 Unit : mm 88 40 (126) (35) 91 R(PT) ½ Male S crew (T wo places) (L2 ) Φ 66 87 L1 Note1: Cable glands are not provide d for LF414 of FM and CSA a pproved t ype. Refer to the pa rt Cable c onnection port at det ector. Note2: 1 inch = 25.4m m BS16, DIN PN16 and JIS 10K dimensions: Meter size (mm) L1 (mm) L2 (mm) D1 (mm) Wei ...

  • Toshiba LF410/LF602 - page 8

    LF410/LF600 LF410/LF602 8 矢視A 信号ケ ー ブ ル グラ ン ド 電源ケ ー ブ ルグ ラ ン ド 封止栓 励 磁 ケー ブル グラ ンド 電流 出 力ケー ブルグラ ン ド 接地端子 (M4 ) 取付金具 4－ φ 11 取付金具 82 (36) 156 13 15 1 178 200 151 74± 0.3 25 LCD 表示 器 赤外線ス イ ッ チ Exci tation ca ...

  • Toshiba LF410/LF602 - page 9

    LF410/LF600 LF410/LF602 9 T erm inal bo ard Conne cted de tecto r Excitation cabl e IV wi r e 5.5 mm 2 or more Pow e r sw itch (Ext er nal do uble -pol e po w e r sw itch ) Thi ck walled st eel con du it Signal cabl e Pow e r cable (CVV) Digital input cable (CVV -S) Curre nt output ( 4~20mA dc) or PROFI BUS Gr ounde d w ith 100 Ω or less gro und ...

  • Toshiba LF410/LF602 - page 10

    LF410/LF600 LF410/LF602 10  Wiring Precautions (1) Explosion proof type flowmeters are not provided cable glands. Refer to the part Cable connection port at detector and converter. (2) Connect the grounding wire (IV wire 5.5mm² or more) to a good earth ground (100 Ω or less ground resistance). Make the wire as short as possible. Do not use a c ...

  • Toshiba LF410/LF602 - page 11

    LF410/LF600 LF410/LF602 11  Piping Precautions (1) Design piping so that t he flowmeter detector pipe is always filled with the fluid being measured, whether the fluid is flowing or not. (2)The detector has no adjustable piping mechanism. Install an adjustable short pipe where needed. L:Required straight pipe length (3) The required straight pip ...

  • Toshiba LF410/LF602 - page 12

    LF410/LF600 LF410/LF602 12  Meter Size To select the meter size: See Figure 13 and find meter sizes within the velocity of 0.1 to 10m/s for a specified full-scale (measuring range high limit) flow. Select one that has its full-scale velocity between 1 and 3m/s. Note: Make sure the full-scale flow rate used for the final planning stage stays with ...

  • Toshiba LF410/LF602 - page 13

    LF410/LF600 LF410/LF602 13  About establishment environment Do not store or install the flowmeter in: • Places where there is direct sunlight. • Places where excessive vibration or mechanical shock occurs. • Places where high temperature or high humidity conditions obtain. • Places where corrosive atmo spheres obtain. • Places submerge ...

  • Toshiba LF410/LF602 - page 14

    LF410/LF600 LF410/LF602 14 Table 3. Specification Code (Waf er type detector LF410 Series) Detector ca tegory Model Specific ation Code Normal type Ex. type 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description Gr.-A Gr.-B Gr .-C Gr.-D L F 4 1 0 Normal specification type √ √ L F 4 1 4 Hazardous location certification type (Note 1) √ √ M e t e r s i ...

  • Toshiba LF410/LF602 - page 15

    LF410/LF600 LF410/LF602 15 Table 4. Specification Code for converter s Model Specific ation Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Contents L F 6 0 Elec tromagnetic flowmeter converter LF600 type LF602 type 0 Integral (Combined) type  – 2 Separate (Remote) type –  A F Purpose Standard cFMus class I, Division 2 approved     A B ...

  • Toshiba LF410/LF602 - page 16

    LF410/LF600 LF410/LF602 No. EJL-114B Specifications are subject to change without notice. Printed in Japan 2006-10 (TDOC) © TOSHIBA Corporation 2006 All Rights Reserved. Misuse of this product can result in da mages to property or human injury. Read related manuals carefully before using this product. ISO9001 and ISO1400 1 are certified. ...

Manufacturer Toshiba Category Oxygen Equipment

Documents that we receive from a manufacturer of a Toshiba LF410/LF602 can be divided into several groups. They are, among others:
- Toshiba technical drawings
- LF410/LF602 manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba LF410/LF602
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba LF410/LF602.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba LF410/LF602, service manual, brief instructions and user manuals Toshiba LF410/LF602. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba LF410/LF602.

Similar manuals

A complete manual for the device Toshiba LF410/LF602, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba LF410/LF602 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba LF410/LF602.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba LF410/LF602 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba LF410/LF602, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba LF410/LF602, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba LF410/LF602 - which should help us in our first steps of using Toshiba LF410/LF602
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba LF410/LF602
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba LF410/LF602 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba LF410/LF602?

Use the form below

If you did not solve your problem by using a manual Toshiba LF410/LF602, ask a question using the form below. If a user had a similar problem with Toshiba LF410/LF602 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)