Manual JVC GY-HM750CHE

137 pages Not applicable
Download

Go to site of 137

Summary
  • JVC GY-HM750CHE - page 1

    HD MEMOR Y CARD CAMERA RECORDER GY-HM750U GY-HM750CHU GY-HM750E GY-HM750CHE INSTR UCTIONS * The illustration shows the GY -HM750E with the supplied viewfinder , microphone and lens attached. * GY -HM750CHU/GY -HM750CHE does not come with a lens. For Customer Use: Enter below the Serial No. which is located on the body . Retain this information for ...

  • JVC GY-HM750CHE - page 2

    II Intr oduction 1. Re a d a ll of the s ei n s tr u ction s . 2. Sa ve the s ei n s tr u ction s for l a ter us e. PORTABLE CART WARNING ( s ym b ol provided b y RETAC) S 3125A IMPORTANT S AFEGUARD S 4. Unpl u g thi sa ppli a nce s y s tem from the w a ll o u tlet b efore cle a ning. Do not us e liq u id cle a ner s or a ero s ol cle a ner s .U s ...

  • JVC GY-HM750CHE - page 3

    III Safety Precautions RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION The e xclamation point within an e q uilateral triangle is intended to aler t the user to the presence of impor tant operating and maintenance (ser vicing) instructions in the literature accompanying the appliance . FOR USA AND CANADA CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK ...

  • JVC GY-HM750CHE - page 4

    IV Intr oduction FOR EUROPE This e q uipment is in conf or mity with the provisions and protection re q uirements of the correspondi ng European Directives. This e q uipment is designed f or professional video appliances and can be used in the f ollowing environments: ● Controlled EMC en vironment (fo r example , pur pose-b uilt broad-casting or ...

  • JVC GY-HM750CHE - page 5

    V FOR USE IN CHINA ONL Y ...

  • JVC GY-HM750CHE - page 6

    2 Intr oduction Intr oduction Precautions f or Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Names of P arts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Side Control P anel . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • JVC GY-HM750CHE - page 7

    3 Menu Displa y and Detailed Settings Basic Operations in Menu Screen . . . . . . . . . . . . . . . . . . . 70 Displa y and Description of the Menu Screen . . . . . . . . 70 T ext Input with Softw are Ke yboard . . . . . . . . . . . . . . . . 71 Menu Screen Hier archical Char t . . . . . . . . . . . . . . . . . . . . 72 Main Menu Screen . . . . . . ...

  • JVC GY-HM750CHE - page 8

    4 Intr oduction This camera recorder enables recording of HD/SD f or mat images to an SDHC card, and also play back of these images. New [Dual Rec] f eature This recorder is e q uipped with two SD card slots as well as a new [Dual Rec] f eature that enables simultaneous recording to both SDHC cards. Backup recording is also suppor ted on the camera ...

  • JVC GY-HM750CHE - page 9

    5 Prof essional Batteries Included Batteries su ch as Anton Bauer and IDX b atteries that ar e used in the broadcast in dustry can b e used with this camera recorder . Suppor t f or Wide V ariety of Output Suppor ts industr ial output such as HD-SDI output and IEEE1 3 94 output. Application Software Pr ovided The [JVC ProHD Clip Mana ger] applicati ...

  • JVC GY-HM750CHE - page 10

    6 Intr oduction Maintenance 䡵 T ur n off the pow er before perf or ming any maintenance. 䡵 Wipe the e xter nal cabinet o f the unit with a soft cloth. Do not wipe the body with benzene or thinner . Doing so ma y cause the surface to melt or tur n cloudy . When it is e xtremely dir ty , soak the cloth in a solution of ne utral detergent, wipe th ...

  • JVC GY-HM750CHE - page 11

    7 Others 䡵 Do not inser t objects oth er than the memor y card into the card slot. 䡵 Do not b lock the v ent on the unit. Blocking of the vent causes internal h eating and may lead to burns and fires. 䡵 Do not turn off the [POWER] s witch or remov e the pow er cable during recording or playbac k. 䡵 The camer a recorder ma y not show stab le ...

  • JVC GY-HM750CHE - page 12

    8 Intr oduction This camera recorder has three operation modes - Camera mode, Media mode, and USB mode . The operation mode indicator on the left side of the camera recorder lights up according to the mode. Operation Mode Camera Mode Media Mode USB Mode (USB Mass Storage Class) Camera Mode IEEE1 3 94 Mode SD Card Mode Thumbnail Display Pl ayba ck ( ...

  • JVC GY-HM750CHE - page 13

    9 Operation Mode Operation Mode Indicator Description Camera Mode Camera Mode Blue This is the camera shooting mode. The camera recorder star ts up in Camera mode when the power is tur ned on. Me m o : ● Images recorded on the SDHC card cannot be played back in this mode. How ev er , you can check (pla y back) the most recently reco rded image us ...

  • JVC GY-HM750CHE - page 14

    10 Intr oduction A Front T ally Lamp ( A Pa g e 3 0, 9 3 ) B Viewfinder Cable Clamp ( A Pag e 22 ) C [ZEBRA ON/OFF] Zebra ON/OFF Switch ( A P a ge 20) [SKIN AREA/SPO T METER] Skin Area/Spot Meter Switc h ( A Pag e 8 0) D [A WB] A uto White Balance Button ( A P age 42) ● Setting the [WHT .BAL.] selection switch ( A P age 12) I on the control pan e ...

  • JVC GY-HM750CHE - page 15

    11 O Back T all y Lamp ( A Pag e 3 0, 9 3 ) P [PHONES] Earphone Connector ( Φ 3 .5) ( A Pag e 47 ) Q [LENS] Lens Connector (12-pin Connector) ( A Pag e 2 1 ) R [ IN P UT 1 / IN P U T2 ] Aud i o I n p ut Term i n al 1 , 2 (XLR 3 -pin ⳯ 2) ( A Pag e 4 6 ) S Microphone Cable Clamp ( A Page 21) T [CH-2 INPUT] CH-2 A udio Input T erminal Selection Sw ...

  • JVC GY-HM750CHE - page 16

    12 Intr oduction Side Control P anel A [VF BRIGHT] View finder Luminance Adjustment Knob ( A Pag e 29 ) B [VF PEAKING] Contour Adj ustment Knob ( A P age 29) M em o : ● This knob does not function when F ocus Assist is activ ated. ( A P age 3 7) C [FOCUS ASSIST] Fo cus As sist Button Press this button during shooting to displa y the focus area in ...

  • JVC GY-HM750CHE - page 17

    13 M em o : ● When [Camera Functi on] menu B [Switch Set] B [AE LEVEL] is set to A AE LE VEL/VFR B , the cross-shaped butt on ( H I ) is used to set the number of frames during V ariable F rame Rec. ( A P age 60 [V ariable F rame Rec]) ( A P age 80 [AE LEVEL]) 䡵 Dur ing Media mode (SD Card mode) ( A P age 61) Thumbnail operation : Cross-shaped ...

  • JVC GY-HM750CHE - page 18

    14 Intr oduction Side T erminal A [HD/SD-SDI] HD/SD-SDI Output T e rminal (BNC) ( A P age 120) B [Y/VIDEO] Y/Composite Video Signal Output T erminal (BNC) ( A Page 120) C [PB] PB Video Signal Output T erminal (BNC) ( A P age 120) D [PR] PR Video Signal Output T erminal (BNC) ( A P age 120) E [REMO TE] Remote T erminal ( A P age 125) F [DC INPUT] DC ...

  • JVC GY-HM750CHE - page 19

    15 SD Slot ( A Pag e 3 1) A Card Slot A Status Indicator B [SLO T SELECT] Card Slot Selection Button F or switching SDHC cards. C SDHC Card Co ver D Card Slot B Status Indicator E [OPEN] SDHC Card Co ver Open/Close Knob Rear A Shoulder Belt Mount (x2) F or mounting a shoulder belt (sold sepa rately). N o t e : ● Be sure to use a shoulde r belt wi ...

  • JVC GY-HM750CHE - page 20

    16 Intr oduction Zoom Lens (Supplied with GY-HM7 50U/GY-HM750E only) A Focus Ring B Zoom Lever/Rin g T o operate zoom with this le ver , turn the [ZOOM] switch M and set it to A MANU . B . C Iris Ring T o operate auto iris, set the iris mode s witch H to A A B . D Lens Cable E [REC] Record T rigger Button Star ts/stops recording. F [RET] Return Vid ...

  • JVC GY-HM750CHE - page 21

    17 * Models with an E suffix are for the European mark et and the UL Listing mar k is not applicable. Basic System Diagram Shoulder B elt Earphone Focus Manual Unit HZ-FM1 3 (FUJINON) HZ-FM15 (CANON) 1/ 3 Zoom Lens Th1 3 x 3 .5BRMU(FUJINON) Zoom Ser vo Control HZ-ZS1 3 B 1/2 Zoom Lens Microphone 1/ 3 Zoom Lens KT14x4.4KRSJ (CANON) (GY -HM750U /GY - ...

  • JVC GY-HM750CHE - page 22

    18 Intr oduction Y ou can display the camera status, media inf or mation, zebra patter n, and various markers in the video image on the LCD monitor and viewfinder screens during shooting. Besides camera and playbac k images, the f ollowing characters are display ed on the LCD monitor and viewfinder . 䡵 Status screen ( A Page 18) 䡵 Auto W hite d ...

  • JVC GY-HM750CHE - page 23

    19 䡵 Status Screen (VF/LC D) During Clip Pla yback in Media Mode (SD Car d Mode) ( A P age 106) The display s witches between the 3 screen types with ev er y press of the [ST A TUS] button. (ST A TUS 0 B 1 B 2 B 0) 䡵 Status Screen in Media Mode (IEEE1 3 94 Mode) ( A P a g e 107) The display s witches between the 2 screen types with ev er y pres ...

  • JVC GY-HM750CHE - page 24

    20 Intr oduction A uto White Display (Camera Mode Onl y) Displays the operation and result when A uto White Balance is activated. ( A P age 42 [Adjusting the White Balance]) Menu Setting Screen F or configur ing various settings. Press the [MENU] button to di spla y the menu setting screen. ( A P age 70 [Basic Operations in Menu Screen]) Alarm Disp ...

  • JVC GY-HM750CHE - page 25

    21 Preparations Attaching the Zoom Lens (Supplied with GY-HM7 50U/GY-HM750E only) 1 Loosen the mount ring. 2 Attach the zoom lens such that the pin matches the hole of the moun ting area. 3 Tighten the moun t ring. 4 Connect the cable connector . 5 Attach the lens cable to the c lamp. M em o : ● Tighten the mount ring completely . If it is not fu ...

  • JVC GY-HM750CHE - page 26

    22 Preparations T o use this camera recorder , y ou can attach a battery pack or connect an AC adapter to it. ( A P age 22 [Using a Battery P ack]) ( A P age 22 [Using AC P ower (DC IN P o wer)]) N o t e : ● Set the [POWER] s witch to A OFF B befo re changing the power supply that operates this camer a recorder . Use an AC adapter (sold separatel ...

  • JVC GY-HM750CHE - page 27

    23 Precautions for the Battery Operation ● Do not remove the batter y when the [POWER] s witch is A ON B . ● Do not inser t or remov e the DC cable when the batter y is in use . ● Leaving the camera recorder unused with the battery inside will deplete the batter y power e ven if you set the [PO WER] switch to A OF F B . Remov e the b atter y ...

  • JVC GY-HM750CHE - page 28

    24 Preparations P ower Status Displa y 䡵 Viewfinder and LCD Monitor Screens The power status is displa yed on the status and menu screens. If the batter y or supplied voltage from the A C adapter is low , a w ar ning will be displayed in red. N o t e : ● If the batter y in use is no t a recommended one, the batter y mark which indi cates the ba ...

  • JVC GY-HM750CHE - page 29

    25 T urning On the P ower 1 Set the [PO WER] s witch to A ON B . The camera recorder star ts up in Camera mode. M em o : ● The camera recorder alw a ys star t up in Camera mode when the [POWER] s witch is set to A ON B . ● Press the [CAM/MEDIA] b utton to s witch to a different mode. The operation mode indicator changes as below . See [Operatio ...

  • JVC GY-HM750CHE - page 30

    26 Preparations Set the date/time of the built-in clock in the [Initial Setting] screen. The configured date/time da ta is sav ed in the built-in rechargeable battery ev en if the power is turned off. Setting the Cloc k in t he [Initial Setting] Screen The [Initial Setting] screen appears when the power is turned on for the first time and when th e ...

  • JVC GY-HM750CHE - page 31

    27 Changing the Displa y Style Y ou can change the displ a y style of the date/time on the menu. M em o : ● T o perform the settin gs while looking at the monitor screen connected to the video signa l output terminal, set [Analog Out Char .] or [SDI Out Char .] in the [A/ V Out] menu to A On B . ( A P age 92) 䡵 Setting the date style (Date Sty ...

  • JVC GY-HM750CHE - page 32

    28 Preparations When the lens is first attached , adju st the back f ocus of the lens if the focus is not clear when zoomed to the telephoto or wide angle end. ● Place an object 3 m and abov e awa y from the camera recorder . ● The Siemen s Star Chart is most suitab le as the object. 1 Set the iris mod e switch of the lens to A M B (manual). 2 ...

  • JVC GY-HM750CHE - page 33

    29 䡵 Adjusting the LC D Monitor Screen Adjusting co ntour and brightness ● Use the [LCD BRIGHT +/-] button to adjust the brightness of the LCD monitor screen. Press the [+] and [-] buttons simultaneously to retur n to standard settings. ● During adjustme nt, the brightness le v el is displa y ed on the LCD monitor screen. ● During Camera mo ...

  • JVC GY-HM750CHE - page 34

    30 Preparations Displa ys on the LCD Monitor and Viewfinder Screens 䡵 When [LCD + VF] in the [LCD/VF] Menu is Set to A Off B ( A Pag e 88 ) Displays on the LCD monitor and vie wfinder screens (VF) are indicated as below . M em o : ● Press and hold the [DISPLA Y] button f or 2 seconds to switch the displa y between the LCD monitor and viewfinder ...

  • JVC GY-HM750CHE - page 35

    31 *1 : [F ront T ally] and [Back T ally] can be set independ ently with the menu settings. ( A Page 9 3 ) *2 : Only batter y alar m is display ed. * 3 : Paused state during special record ing ([Clip Continuous]). ( A Page 59) M em o : ● Blinking takes prior ity ov er lighting up. This camera recorder sav es the recorded images and audio sound on ...

  • JVC GY-HM750CHE - page 36

    32 Preparations Inser ting an SDHC Car d This camera recorder comes with two card slots f or video/ audio recording a nd playbac k (Slot A and B). 1 Slide the SDHC card cover kn ob of the desired slot in the direction of the ar row and open the co ver . 2 Insert an SDHC card with the notched corner fir st. 3 Close the SDH C card co ver . 䡵 Card S ...

  • JVC GY-HM750CHE - page 37

    33 Formatting (Initial izing) SDHC Cards When the follo wing cards are inser ted , A FORMA TTING REQUIRED B appears. Format the card using the camera recorder menu. ● Unformatted SDHC cards ● SDHC cards f or matted under different specifications * For details of the men u operation, see [Basic Oper ations in Menu Screen] ( A P age 70). N o t e ...

  • JVC GY-HM750CHE - page 38

    34 Preparations Restoring the SDHC Car d It is necessar y to restore the SDHC card if an abnor mality occurs to the data in the card due to some reasons. The message A REST ORE MEDIA B appears on the LCD monitor/viewfinder screen when an SDHC card th at re q uires restor ing is inser ted. M em o : ● T o cancel the messa ge displa y , press t he [ ...

  • JVC GY-HM750CHE - page 39

    35 Clips Recor ded to SDHC Cards 䡵 Folders in the SDHC Car d Images captured are recorded to [PRIV A TE] B [JVC] fo lder inside the SDHC card. Images recorded are sor ted into the respective f olders according to the menu settings below . M em o : ● By formatting (initializin g) the SDHC card from the [F ormat Media] menu on the camer a recorde ...

  • JVC GY-HM750CHE - page 40

    36 Shooting Preparations 1 Attach the accessories. ( A P age 21) 2 Supply battery or A C ad apter power to the cam era recorder . ( A Pa g e 22 ) 3 Insert an SDHC c ard. ( A Pag e 3 1) 4 T urn on the power of the camera recor der . Set the [POWER] s witch to A ON B . The camera recorder star ts up in Camera mode and is ready for shooting. 5 Adjust ...

  • JVC GY-HM750CHE - page 41

    37 Focus Assist Function When the [FOCUS ASSIST] bu tton is pressed during shooting, the focused area is display ed in co lor (blue , red, or green). This enables easy and accurate f ocusing. Select the color in the menu. M em o : ● When [Main Menu] B [LCD/VF] menu B [Shooting Assi st] B [F ocus Assist] is set t o A ACCU-F ocus B , the depth of f ...

  • JVC GY-HM750CHE - page 42

    38 Shooting Y ou can select the system definit ion (HD or SD), file f ormat for recording /pla yback and the record f or mat f or video images on this camera recorder . M em o : ● Make a selection in [Main Menu] B [Record Form at] menu. Selecting a Syst em Definition Select the system definition in [System Definition]. There are two diff erent de ...

  • JVC GY-HM750CHE - page 43

    39 Selecting the Aspect Ratio of SD Videos Select an aspect ratio f or the images. The av ailable options va r y as follo ws depending on the [System Definition] setting. ● Fo r A HD (MPEG2) B : Fixed at 16:9 ● Fo r A SD (D V) B : 16:9, 4: 3 Setting the Recor d Format Menu 1 Display the [Main Men u] B [Record Format] men u. 2 Set each of the it ...

  • JVC GY-HM750CHE - page 44

    40 Shooting This function electr ically b oosts the light sensitivity wh en there is insufficient illuminati on on the object. Y ou can set the gain of the video amplifier according to the brightness of the object. Select the setting mode according to your shooting conditions. Fixed Gain Mode (Man ual Gain Switching) Y ou can select the gain of the ...

  • JVC GY-HM750CHE - page 45

    41 䡵 Switching Shutter Speed When shutter is ON, use th e cross-shaped button ( JK ) to set the shutter speed. Shutter speed diff ers according to the video format and variable frame rate settings . 䡵 Dur ing modes other than V ariable F rame Rec 䡵 Durin g V aria b le F ram e Re c M em o : ● Shutter speed is usually display ed in seconds (S ...

  • JVC GY-HM750CHE - page 46

    42 Shooting Adjust the white balance according to the color temperature of the lighting. Y ou can se lect the adjustment mode according to the shooting conditi ons. As the color of the light (color temperature) v aries according to the light source , it is necessar y to readjust the white balance when the main light source illuminating the object c ...

  • JVC GY-HM750CHE - page 47

    43 䡵 Error Message If the white balance adjustment is not correctly completed, one of the follo wing messages will appear for about 5 seconds. 䡵 White P aint Adjustment Y ou can fine-tune the white balance sav ed in Memor y A or Memory B. * Adjust [White P aint R]/[White P aint B] in [Main Menu] B [Camera Process] B [White Balance] menu ( A Pag ...

  • JVC GY-HM750CHE - page 48

    44 Shooting Y ou need to adjust white shadi ng when you change the lens. Even if white balance is adjusted in the center of the screen, the top and bottom of the screen may not be adjusted. In this case , green a nd yello w colors m ay ap pear on the screen. This is due to the char acteristic of the lens . Correcting this phenome na is kno wn as wh ...

  • JVC GY-HM750CHE - page 49

    45 Use the ND filter to keep the lens aper ture in the appropriate range. Switch according to the br ightness of the object. When the switch is changed, the position of the s witched ND filter is display ed on the LCD monitor and viewfinder screens. (ST A TUS 1 Screen) M em o : ● The display of the ND filter position is set to A Off B by default. ...

  • JVC GY-HM750CHE - page 50

    46 Shooting Y ou can record audio from the two channels (CH-1/CH-2) in synchronization with video images on this camera recorder . The camera recorder is e q uipped with [INPUT1] and [INPUT2 ] terminals f or audio input. Y ou c an select a record ing channel and the adju stment mode (man ual/automati c). Setting A udio Input Select the audio to inp ...

  • JVC GY-HM750CHE - page 51

    47 N o t e : ● When the [FULL A UT O] switch on the camera recorder is set to A ON B , the recordin g le vel cannot be adjusted with the [A UDIO LEVEL CH-1/CH-2] adjustment knob . 䡵 A utomatic Adjus tment Mode Set the [A UDIO SELECT CH-1/C H-2] s witch on the camera recorder to A AU TO B or the [FULL A UTO] s witch to A ON B to enter A utomatic ...

  • JVC GY-HM750CHE - page 52

    48 Shooting Time code and user’s bit data are recorded with the video in this camera recorder . The time code and user’ s bit are display ed on the viewfinder and LCD screens d uring playbac k or recording. (Status screen) Displa ying Time Code and User’ s Bit The time code and user’ s bit are display ed on the viewfinder and LCD screens d ...

  • JVC GY-HM750CHE - page 53

    49 Presetting the Time Code Time code and user’s bit data generated from the inter nal time code generator are recorded. This section describes how to set [TC Preset] in the [TC/UB] menu. ( A P age 88) M em o : ● When the fr ame rate set ting in [Main Men u] B [Record Set] B [Record Format] B [F rame & Bit Rate] is A 50, 25, 24 B , settings ...

  • JVC GY-HM750CHE - page 54

    50 Shooting Presetting the Time Code (continued) 䡵 Setting Time Code 1 Select [Main Menu] B [TC/UB] B [TC Preset] and press the Set button ( R ). ( A Pag e 88 ) The [TC Preset] screen appe ars . M em o : ● When the [TC GENE.] s witch is set to A REGEN B , the parameter is displayed as A Regeneration B and cannot be selected. 2 Set the time code ...

  • JVC GY-HM750CHE - page 55

    51 2 Use the cr oss-shaped button ( H I ) to place the cursor at the item to set, then use the cr oss-shaped button ( JK ) to change the va lues. Numbers between 0 and 9 or alphabets between A and F can be specified for the user’ s bi t. M em o : ● Press the [USER2] button to reset each digit to A 0 B . The cursor mo ves to the left. 3 Check th ...

  • JVC GY-HM750CHE - page 56

    52 Shooting Setting User ’ s Bit Without Opening the Men u M em o : ● Settings cannot be made in the following cases . ● [TC GENE.] switch is set to A REGEN B . ● Menu screen is displa yed. ● The camera recorder is not in Camera mode. 䡵 Required Settings Before Preset ( A P age 49) ● Set the [TC DISPLA Y] swit ch to A UB B . ● Set t ...

  • JVC GY-HM750CHE - page 57

    53 When the luminance l ev el range f or displa ying zebr a patterns is specified, diag onal lines (z ebra patter n) are displayed at areas with the specified luminan ce le vels during shooting. Specify the Brightness (Luminance) Level Range for Displa yi ng Zebra Pattern Specify the upper (T op1, T op2) and low er (Bottom1, Bottom2) limits of the ...

  • JVC GY-HM750CHE - page 58

    54 Shooting The brightness of th e object during shoo ting is display ed. This function is useful when setting video or stage lighting or when specifying camera exposure. A cursor indicating the location and the brightness (% ) of that location ar e displa yed in the images sho wn on the LCD monitor and viewfinder screens. ● Zebra patterns displa ...

  • JVC GY-HM750CHE - page 59

    55 䡵 When [M anual] is sel ected A [SPO T METER FIXED] is display ed when the switch is flipped. The br ightness of the cursor position is displayed. B [SPOT METER OFF] is display ed when the switch is flipped. Displays of cursors and brightness disappe ar . C [SPOT METER SELECT] is displa yed when the s witch is flipped. The cursor blinks in red ...

  • JVC GY-HM750CHE - page 60

    56 Shooting Y ou can check (re view) the last recorded video clip on the screen. Howe v er , the video clip cannot b e pla yed back if the settings of the camera recorder are diff erent from the video fo r mat (Camera Resolution/F rame & Bit Rate) of the clip . ( A P age 75) M em o : ● T o use this function, assign A Clip Revie w B to any of ...

  • JVC GY-HM750CHE - page 61

    57 If both the slots are loaded with recordable cards in the factory default ([Slot Mode] is set to A Series B ), pressing the [REC] butt on star ts recordin g only to the media in the selected slot. When the remaining space in the selected media runs out, recordi ng continues b y automatically activating the media in the other slot. If both the sl ...

  • JVC GY-HM750CHE - page 62

    58 Shooting N o t e : ● T o perform recording in the Dual Rec mode, it is recommended that you star t recording by making use of two cards with the same capacity and from the f or matted state. ● Y ou can combine the use of the Dual Rec mode with a special recording mode. While in the Dual Rec mode, you can also set [Rec Mode] to A Normal B , A ...

  • JVC GY-HM750CHE - page 63

    59 N o t e : ● Video and audio before the abov e mentioned time may not be recorded after record ing star ts in the following cases. ● Immediately after power on ● Immediately after recording stops ● Immediately after switching from Media mode to Camera mode ● Immediately after setting [Rec Mode] ● Immediately after the end of Clip Revi ...

  • JVC GY-HM750CHE - page 64

    60 Shooting V ariable Frame Rec Shooting in thi s mode allows you to obtain smooth slow motion or q uick motion videos. Using diff er ent frame ra te settings f or recordi ng and playbac k, videos captured at nor mal speed can be play ed back more smoothly than those in low or high speed playbac k. T o enable V a riable F rame Rec, the f ollowing t ...

  • JVC GY-HM750CHE - page 65

    61 Playbac k T o play back clips recorded on SDHC cards, s witch to the Media mode (SD Card mode). Press the [CAM/MEDIA] selection button in Camera mode to enter SD Card mode. A th umbnail screen of the cli ps recorded on the SDHC card is display ed. Y ou can play bac k the selected clip on the thumb nail screen. M em o : ● When an SDHC card with ...

  • JVC GY-HM750CHE - page 66

    62 Playbac k Thumbnail Screen (continued) 䡵 No Detailed Properties (4x 3 Thumbnails) Screen (continued) P l ay i n g B a ck R e c o rd e d Clips (continued) Name Description B SDHC Card Displays the status of the inserted SDHC card, selected SDHC card, write-protect switch, and the need f or restoring. Use the [SLO T SELECT] switch to s witch slo ...

  • JVC GY-HM750CHE - page 67

    63 Name Description H Thumbnail Te x t Displays the time code or date/time at the star t of clip recording. Date/time is display ed in the local time of the shooting location. Set whether to display A TC B or A Date/Time B in the thumbnail menu [Thumbnail T ext]. ( A Page 65) Data/time display depends on the settings in [LCD/VF] B [Status Display] ...

  • JVC GY-HM750CHE - page 68

    64 Playbac k Thumbnail Screen (continued) 䡵 Detailed Properties (4x1 Thumbnails) Screen P l ay i n g B a ck R e c o rd e d Clips (continued) Name Description A Cursor Indicates the selected clip. Use the cross- shaped button ( H I ) to mov e the cursor . After power is turned on and SDHC card is inser ted, or when the camera recorder is switched ...

  • JVC GY-HM750CHE - page 69

    65 P lay i n g B a ck Use the operation buttons on the side control panel of the camera recorder to pla y back. 1 Select the clip to play bac k on the thumb nail screen. Select the clip to pla y back with the cross-shaped button ( JKH I ). 2 Press the playbac k/pause button. Pla yback of the selected clip star ts. 䡵 Time Code Playbac k Time code ...

  • JVC GY-HM750CHE - page 70

    66 Playbac k F or deleting clips . M em o : ● Clips appended with OK mar ks cannot be deleted on the camera recorder . ● Read-only clips can be deleted on a PC. Deleting One Clip Y ou can delete a selected clip with any of the f ollowing operations. A Press [USER2] button when menu is not displa yed. B P erf or m [Delete Clip] B [One Clip] in t ...

  • JVC GY-HM750CHE - page 71

    67 4 Select [Del ete] using th e cr oss-shaped button ( JK ), and press the Set b utton ( R ). Deleting star ts. M em o : ● Button operations are unav ailable during dele tion. The deleting operation cannot be canceled. ● The cursor mov es to the ne xt clip (or previous clip if a next clip does not e xist) after deletion. 䡵 During Playbac k o ...

  • JVC GY-HM750CHE - page 72

    68 Playbac k Y ou can app end OK marks to the clips for impor tant scenes. Clips appended with OK mar ks cannot be deleted, thus protecting the impor tant clips. When the camera recorder is in Media mode (SD Card mode), you can delete the OK marks appended during recording, or append/d elete OK marks after shooting. Appending OK Marks 䡵 During Th ...

  • JVC GY-HM750CHE - page 73

    69 Deleting OK Marks 䡵 During Thumbnail Screen 1 Select a clip to delete OK mark and pre ss the [USER1] button. The OK mark is deleted. M em o : ● The [USER1] b utton i s disab led (displa yed in gra y) an d OK mar ks cannot be deleted when the write- protect switch of the SDHC card is set ( is displayed). ● A OK Mark Added... B / A OK Mark D ...

  • JVC GY-HM750CHE - page 74

    70 Menu Displa y and Detailed Settings Press the [MENU] button on the side control panel of the camera recorder to displa y the menu screen on the LCD monitor and viewfinder . V arious settings f or shooting and pla yback can be configured on the menu screen. There are two types of menu screens - [Main Menu] and [F av orites Menu]. [Main Menu] cont ...

  • JVC GY-HM750CHE - page 75

    71 䡵 Changing Setting V alues T ext Input with Software Ke yboard Use the software k eyboard to enter the [Scene File]/[Picture File] subname and [Clip Name Prefix]. 䡵 [Scene File]/[Pic ture File] ( A Pa g e 1 1 8 ) 䡵 [Clip Name Prefix] ( A P age 76) Name D escription H Header Indicates the current menu type with the line color . Blue : [Main ...

  • JVC GY-HM750CHE - page 76

    72 Menu Displa y and Detailed Settings M em o : ● A [Back] item (omitted in the char t) c an be found at the end of each menu item. Select [Bac k] and press the Set button ( R ) to retur n to the pre vious lev el. Menu Screen Hierar chical Char t Main Menu... ( A Page 74) Record Set... ( A P age 75) Record Format...( A P age 75) System Definition ...

  • JVC GY-HM750CHE - page 77

    73 M em o : ● A [Back] item (omitted in the char t) c an be found at the end of each menu item. Select [Bac k] and press the Set button ( R ) to retur n to the pre vious lev el. TC/UB... ( A Page 88) TC Preset UB Preset Drop LCD/VF ... ( A P age 88) Shooting Assist... ( A P age 89) Marker Setting... ( A Page 90) Status Display ... ( A Page 90) LC ...

  • JVC GY-HM750CHE - page 78

    74 Menu Displa y and Detailed Settings Some menus cannot be set depending o n the operating mode or status of the camera recorder . These items a re displa yed in gra y , and the y cannot be selected. Main Menu Screen Item Function Record Set... Menu screen f or specifying video or aud io settings dur ing shooting and playbac k. The cursor does not ...

  • JVC GY-HM750CHE - page 79

    75 Record Format Men u After setting of all items in the [Record Format] menu is comple te, select [Set] at the bottom of the screen to apply the ne w settings on the cam era recorder and s witch the record format. A A Please W ait B message appears dur ing s witching. * Default values are indicated in bold characters. Recor d Set Menu Item Setting ...

  • JVC GY-HM750CHE - page 80

    76 Menu Displa y and Detailed Settings Rec Mode Menu Clip Set Menu * Default values are indicated in bold characters. Recor d Set Menu (continued) Item Setting V alues Function Rec Mode Normal Pre Rec Clip Continuous Va r i a b l e F r a m e For selecting the record mode f or recording to the SDHC card. ( A Page 58) Me m o : ● [V ariable F rame ] ...

  • JVC GY-HM750CHE - page 81

    77 A udio Set Me nu Item Setting V alues Function Input1 Mic Ref. -50dB -60dB For setting the ref erence input le vel when the [A UDIO INPUT1] button is set to A MIC B or A MIC+48V B . -50dB : Sets -50 dB as the reference v alue. -60dB : Sets -60 dB as the reference v alue. Input2 M ic Ref. -50dB -60dB For setting the ref erence input le vel when t ...

  • JVC GY-HM750CHE - page 82

    78 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. Camera Function Menu Item Setting V alues Function Bars On Off For setting whether to output color bars. On : Color bars are output. Off : Color bars are not output. Me m o : ● When the [FULL A UT O] switch on the camer a recorder is set to A ON B , and [Bar ...

  • JVC GY-HM750CHE - page 83

    79 Switch Set Item * Default values are indicated in bold characters. Item Setting V alues Function FAW None PRESET A B F or assigning t he F AW (Fulltime A uto White Bal ance) function to a position on the [WHT .BAL.] selection s witch. This is fixed at A FAW B when the [FULL AUT O] s witch of the camera recorder is set to A ON B . None : F A W fu ...

  • JVC GY-HM750CHE - page 84

    80 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. Camera Function Menu (continued) Item Setting V alues Function SKIN A./SPO T M. Skin Area Spot Meter F or assigning t he function of the [SKIN AREA/SPO T METER] switch on the camera recorder . Skin Area : Assigns the Skin Detail function and its area display . ...

  • JVC GY-HM750CHE - page 85

    81 FULL A UTO Item This is used to set specific functions to the auto mode w hen the [FULL A UT O] s witch of the camera recorder is set to A ON B . Item Setting V alues Fu nction Gain SW Set ALC SW Set : Sets gain according to the [GAIN] selection switch. ALC : Sets g ain to the A ALC B (forced auto) mode . Me m o : ● When the remote control uni ...

  • JVC GY-HM750CHE - page 86

    82 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. Camera Pr ocess Menu Item Setting V alues Functio n Detail Max, 9 to 1, Normal, -1 to -9, Min, Off F or adjusting the contour (detail) enhancement lev el. Increase the number : Sharpe ns the contour . Decrease the number : Softens the contour. Off : Disables t ...

  • JVC GY-HM750CHE - page 87

    83 * Default values are indicated in bold characters. Item Setting V alues Function White Clip 100% 10 8 % F or setting the point to apply white clip for in put video signals with a high luminance lev el. 100% : Applies white clip at the point where the luminance lev el is 100 %. Even when this item is set to A 108% B , it switches automatically to ...

  • JVC GY-HM750CHE - page 88

    84 Menu Displa y and Detailed Settings Detail/Adjust... Item * Default values are indicated in bold characters. Camera Pr ocess Menu (contin ued) Item Setting V alues Function V/H Balance H-Max, 4 to1, Normal, -1 to -4, H-Min F or setting the H/V balance to enhance contour (det ail) in the horizontal (H) or ver tical (V) direction. Increase the num ...

  • JVC GY-HM750CHE - page 89

    85 White Balance Item * Default values are indicated in bold characters. Item Setting V alues Fu nction Preset T emp. 2800K, 3 200K, 3 400K, 4200K, 4800K, 5200K, 5600K , 6500K, 7500K F or setting the color temperature when the [WHT .BAL.] selection s witch of the camera recorder is set to A PRESET B . Alternat ive T emp. 2800K, 3 200K , 3 400K, 420 ...

  • JVC GY-HM750CHE - page 90

    86 Menu Displa y and Detailed Settings Shading Mode/Adjust Item * Default values are indicated in bold characters. ● This item is selectab le only when [Shading Mode] is set to A Manual B . [R Le vel], [G Le v el], and [B Le vel] cannot be selected when this is set to A Preset B . ● The screen s witches to a color displa y , and the displa ys f ...

  • JVC GY-HM750CHE - page 91

    87 * Default values are indicated in bold characters. Item Setting V alues Function G&Cy G Level Max, 19 to 1, Normal, -1 to -19, Min F or adjusting the green/cyan lev el of the video toward green. Increase the number : Enhances the green component of green/cy an. Decrease the number : Reduces the green component of green/cyan. G&Cy Cy Leve ...

  • JVC GY-HM750CHE - page 92

    88 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. TC/UB Menu Item Setting V alues Function TC Preset ^ F or setting the time code (hour , min ute, second, frame). Display : Drop setting 02:02:25.2 0 : Non Drop settin g 02:02:25:20 UB Preset ^ F or setting the user’ s bit. (Digit by digit) Display : AB CD EF ...

  • JVC GY-HM750CHE - page 93

    89 Shooting Assist Item * Default values are indicated in bold characters. Item Setting V alues Function Focus Assist ACCU-F ocus Normal F or specifying the operation when the [FOCUS ASSIST] button on the camera recorder is pressed. ( A P age 3 7) A CCU-Focus : E nab les the Focus Assist and A CCU-Focus (f orced focus) functions. The depth of field ...

  • JVC GY-HM750CHE - page 94

    90 Menu Displa y and Detailed Settings Marker Setting Item ( A P age 110 [Mar ker and Saf ety Zone Displays (Camera Mode Only)]) * Default values are indicated in bold characters. *1: During Clip Re view or when in the Media mode, the markers do not appear regardless of the setting. Status Displa y Item This menu is used to set the status displa ys ...

  • JVC GY-HM750CHE - page 95

    91 * Default values are indicated in bold characters. Item Setting V alues Function TC/UB On Off F or specifying whether to display the time code/user’ s bit rate in the status displa y on the LCD monitor and viewfinder screens. On : Displays the time code or user’ s bit rate . Whether time code or user’ s bit rate is display ed is determined ...

  • JVC GY-HM750CHE - page 96

    92 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. A/V Out Menu Item Setting V alues Function Output T erminal Composite Component Off F or setting output signals from the [Y/VIDEO]/[ PB ]/[PR] video signal output ter minal (BNC) on the side of the camera recorder . Composite : Outputs composite signals to the ...

  • JVC GY-HM750CHE - page 97

    93 * Default values are indicated in bold characters. * Default values are indicated in bold characters. Item Setting V alues Function Audio Monitor Stereo Mix F or setting the audio sound of the [PHONES] ter minal to stereo or mixed sound when the [MONIT OR SELECT] switch on the side of the camera recorder is set to A Both B . Mix : Outpu ts mix e ...

  • JVC GY-HM750CHE - page 98

    94 Menu Displa y and Detailed Settings * Default values are indicated in bold characters. Other s Menu (contin ued) Item Setting V alues Function 1 3 94 Rec T rigger Ext Series Split Synchronize Off For setting the recording trigger f or the external recording device connected to the [IEEE1 3 94] terminal. Ext : Outputs recording trig ger to the e ...

  • JVC GY-HM750CHE - page 99

    95 * Default values are indicated in bold characters. Menu settings and b utton operations ([SHUTTER], [AE LEVEL], etc.) can be sav ed. It is useful to save settings according to different shooting conditions. Item Setting V alues Function Time Zone UTC-00: 3 0 to UTC-12:00, UTC, UTC+14:00 to UTC+00: 3 0 (In increments of 3 0 minutes) For setting t ...

  • JVC GY-HM750CHE - page 100

    96 Menu Displa y and Detailed Settings Y ou can select and add/edit fre q uen tly used menu items freely to create a personal menu screen (F av orites Menu). M em o : ● [F a vorites Menu] is only enabled in the Camera mode. [F av orites Menu] remai ns unchanged ev en when the recording format changes. ● Up to 20 menu items can be added (two pag ...

  • JVC GY-HM750CHE - page 101

    97 Editing Fa v orites Menu Y ou can del ete or change the order of the items added to [F av orites Menu]. 䡵 Deleting Items from [F av orites Menu] 1 Open the [Fav orit es Men u] screen. A Press the [MENU] button to open the [Main Menu] screen. B Press the [ST A TUS] button to open the [F avorites Menu] screen. 2 Select [Edit Fa vorites] and pres ...

  • JVC GY-HM750CHE - page 102

    98 Menu Displa y and Detailed Settings Editing Fa v orites Menu (continued) 䡵 Changing the Order of Items in [F av or ites Menu] 1 Open the [Fav orit es Men u] screen. A Press the [MENU] button to open the [Main Menu] screen. B Press the [ST A TUS] button to open the [F avorites Menu] screen. 2 Select [Edit Fa vorites] and press the Set b utton ( ...

  • JVC GY-HM750CHE - page 103

    99 4 Select the position to move to with the cr oss-shaped button ( JK ). Mov e the position selection bar with the cross-shaped button ( JK ) and select a position to mov e to . 5 Press the Set button ( R ). The selected item mov es to the new position. 6 Press the [USER1] button. The option menu to exit the [F av orites Me nu] editing mode appear ...

  • JVC GY-HM750CHE - page 104

    100 Status Screen ST A TUS 0 Screen Status Screen in Camera Mode S TBY MAX 123 % MIN 45 % S KIN AREA S .DTL B -3 A<3200K> F5.6 AE+1 9dB 1/10000 30/24 fp s 20 min 1min 1min B A RE S DD DU AL 2 0 min DD R E S 1min 1min B B A A A DU AL N M L K J I H G F E CD B A Appears only when a warning is displayed. ( A Page 102) Appears only when connected ...

  • JVC GY-HM750CHE - page 105

    101 * 1 : The variable r ange of the shutter speed varies according to the video format settings. ( A P age 41) Item Description I Black T oe Appears when [Black T oe] in the [Camera Process] menu is set to a value other than A Normal B . ( A Page 82) B+1 to B+5 : Displays the A Stretch Le vel B when [Black T oe] is set to A Stretch B (Lev el 1 to ...

  • JVC GY-HM750CHE - page 106

    102 Status Screen ST A TUS 1 Screen Status Screen in Camera Mode (continued) 00:00:00:00 20 min MAX 123 % MIN 45 % S KIN AREA S .DTL B -3 ND1/16 A<3200K> F5.6 AE+1 9dB 1/10000 STBY 100min 100min 1280x720 60p HQ OK B A 282min 30/24 fps DD DU AL S TB Y MAX 12 3 % MIN 45 % S KIN ARE A S .DTL B -3 A<3200K > F5 . 6 AE+1 9 dB 1 / 1 0000 3 0 / ...

  • JVC GY-HM750CHE - page 107

    103 Item Descr iption H ND Filter P osition Displays the current ND filter position. No display : [ND FIL TER] is set to A OFF B ND1/4 : [ND FIL TER] is set to A 1/4 B ND1/16 : [ND FIL TER] is set to A 1/16 B Me m o : ● Y ou can tur n ON/OFF the display using [Filter] of [Status Displa y] in the [LCD/VF] menu. ( A Page 90) I Remaining Space on Ex ...

  • JVC GY-HM750CHE - page 108

    104 Status Screen ST A TUS 2 Screen Status Screen in Camera Mode (continued) CAMERA INFORMA TION SETUP FILE SCENE [ SCENE ] ZEBRA1 50%-100% ZEBRA2 70%-80% A UDIO CH1 CH2 FORMA T QuickTime MEDIA 125min 12 3 min B A Jan 2. 200 9 01:2 3 :45AM G F E D C B A 28 2m i n S TBY * 0 : Same as ST A TUS 0 Screen ( A Page 100) * 1 : Same as ST A TUS 1 Screen ( ...

  • JVC GY-HM750CHE - page 109

    105 ST A TUS 3 Screen This screen displays a list of the fun ctions assigned to the switches . ST A TUS 4 Screen This screen displays the e vent. It is also used to display warnings only . S WITCH A SS IGN F A W NONE GAIN [ L / M / H ] 0dB / 9dB / 12dB U S ER 1 BAR S U S ER 2 B. S TRETCH3 U S ER 3 LOAD FILE RET CLIP REVIEW S KIN/ S POT S POT METER ...

  • JVC GY-HM750CHE - page 110

    106 Status Screen These are the status screens display ed in Media mode (SD Card mode, Media mode). ST A TUS 0 Screen This screen displa ys the media st atus or ev ent. It is also used to displa y warnings only . ST A TUS 1 and ST A TUS 2 Screens Status Screen in SD Car d Mode OK OK B AC G F J D E IH K B AC G F J D E IH ST A TUS 1 Screen ST A TUS 2 ...

  • JVC GY-HM750CHE - page 111

    107 These are the status screens displa yed in Media mode ( IEEE1 3 94 Input mode). ST A TUS 1 Screen ST A TUS 2 Screen Item Description H Audio Le vel Meter Displays the audio le v el for CH-1 and CH-2. The positions of -20 dB and -10 dB are displayed as A o B . M em o : ● Y ou can turn ON/OFF the display using [A udio Meter] of [Status D ispla ...

  • JVC GY-HM750CHE - page 112

    108 Status Screen Y ou can enlarge and display only the characters of the status screen on the LCD monitor . Status Screen in Camera Mode (continued) Item Description A Frame Rate/Bit Rate Displays the fr ame rate and bit rate in pairs. (60p HQ, 3 0p HQ, 60i HQ, 60p SP , 3 0p SP , 60i SP , 50p HQ, 25p HQ, 50i HQ, 50p SP , 25p SP , 50i SP , 24p HQ, ...

  • JVC GY-HM750CHE - page 113

    109 M em o : ● Durin g enlarged display of the status on the LCD monitor screen, the video image remains displa yed on the viewfinder . Item Description C Time Code G enerator Displays the oper ation mode of the time c ode. (Display: [FREE], [RECR], [REGEN]) ( A Page 48) D Media Status Displays the SDHC card status in characters and symbols . --- ...

  • JVC GY-HM750CHE - page 114

    110 Camera Features The marker and safety z one displays are useful in helping y ou determine the angle of vie w for the image according to the shooting pur pose. 䡵 Example of display when [Aspect Ratio] = A 4: 3 B , [Aspect Marker] = A Line+Halftone B , and [Center Mark] = A On B Y ou can tur n ON/OFF the safety zone and center mark displ a ys a ...

  • JVC GY-HM750CHE - page 115

    111 [Safety Zone] Displa y 䡵 When [Aspect Ratio] = A 4: 3 B , [Aspect Marker] = A Halftone B , and [Center Mark] = A On B [Center Mark] Display 䡵 When [Aspect Ratio] = A 4: 3 B , [Aspect Marker] = A Halftone B , and [Saf ety Zone] = A 80% B 䡵 When [Aspect Ratio] = A 4: 3 B , [Aspect Marker] = A Halftone B , and [Saf ety Zone] = A Off B [Off] ...

  • JVC GY-HM750CHE - page 116

    112 Camera Features The Skin Detail function can be used to reduce the contour enhancement of video signals f or only the skin areas so as to produce a smoother skin tone. Preparations Before Using the Skin Detail Function (Skin Adjust Function) 1 Adjust the white b alance. ( A Pa ge 42) 2 Display the [Skin Color Adjust] screen. ( A Pag e 8 4) ● ...

  • JVC GY-HM750CHE - page 117

    113 Chec king the Preset Hue Area 1 Set the [ZEBRA ON/OFF] swit ch at the front of the camera recorder to the [SKIN AREA/SPO T METER] end. Doing so forcibly turns ON the Skin Adjust function temporarily , and the preset hue area is displayed in color on the LCD monitor and viewfinder . M em o : ● When [Color Gain] in the [Camera Process] men u is ...

  • JVC GY-HM750CHE - page 118

    114 Camera Features The color matri x of the camera recorder can be adjusted to a color of the user’ s pref erence. When shooting is performed using multiple ca meras, the colors of the different camera s can be adjusted, and a color of the user’ s pref erence can be set on this camera recorder . 1 3 saturation parameters and 3 hue pa rameters ...

  • JVC GY-HM750CHE - page 119

    115 3 Adjust Yl&G Mask Range. Adjusting [Yl&G Yl Lev el] and [Yl&G G Lev el] ma y also affect the I-axis (color close to the skin tone). When [Yl&G Yl Lev el] is increased, the skin tone become s slightly more yello wish. On the other hand, when [Yl&G G Lev el] is increased, the skin tone becomes slig htly more greenish. Adjust ...

  • JVC GY-HM750CHE - page 120

    116 Camera Features Process the dark areas according to the balance of bright and dar k areas in the image to adjust the ov erall balance of contrast. 1 Adjust [Black T oe] in the [Camera Pr ocess] menu according to the captured video signals. 2 Set the lumi nance point (P oint Le vel) for A Stretch B or A Compress B . ● Decide the luminance po i ...

  • JVC GY-HM750CHE - page 121

    117 The menu settings can be stored on the camera recorder or an SDHC card by sa ving them as a setup file. Loading a sav ed setu p file enables y ou to reproduce the appropriate setup state speedi ly . T wo types of setup files are availab le. 䡵 Scene fi le: File that contains all menu settings, ranging from video format settings to image creati ...

  • JVC GY-HM750CHE - page 122

    118 Camera Features Saving Setup Files 1 Displa y the [Setup File Mana ge] menu. Select the [Setup File Manage] menu on the [Main Menu] screen, and press the Set button ( R ). ( A Page 95) 2 Select [Store File] an d press t he Set button ( R ). 3 Select [Scene File] or [Pic ture File], and press the Set button ( R ). The e xisting files are displa ...

  • JVC GY-HM750CHE - page 123

    119 M em o : ● If you do not want to sa ve the file , select [Cancel] or press the [CANCEL] button to retur n to the previous screen. ● When saving of a file fails, a A Store Error! B message (indicated in red frame) appears f or se veral seconds , after which the previous screen is displa yed. 8 Savi ng is complete. After saving of t he file i ...

  • JVC GY-HM750CHE - page 124

    120 Connecting External Devices T o output li ve or playbac k video images and audio sound to an external monitor , select the output signals from the camera recorder , and connect using an appropriate cable according to the monitor to be used. Connecting via Composite/Component Output Either component or composite signals can be ou tput from the B ...

  • JVC GY-HM750CHE - page 125

    121 [PHONES] T erminal Audio output from the [PHONES] terminal ca n be selected using [A udio Mo nitor] in the [A/V Out] menu ( A Page 9 3 ) as well as the [MONI T OR SELEC T] sw itch on the camera recorder . The different combinations of settings that are output from the [PHONES] termin al and monitor speaker are as f ollows . [MONIT OR SELECT] Sw ...

  • JVC GY-HM750CHE - page 126

    122 Connecting External Devices “Backup recording” can be perf or med, which allows the same image recorded to the SDHC card on the camera recorder to be recorded to the external device connected to the IEEE1 3 94 terminal. ( A Page 122) N o t e : ● When connecting the camera recorder to an external de vice using an IEEE1 3 94 cable , make su ...

  • JVC GY-HM750CHE - page 127

    123 5 Set the external de vice to a mode that enables recording. F or setting and operation of external devices , refer to the instruction manual of the respective de vices. N o t e : ● Adjust the camera recorder and e xter nal device to the same IEEE1 3 94 settings. ● Star t recording only after ensur ing that the de vices are proper ly connec ...

  • JVC GY-HM750CHE - page 128

    124 Connecting External Devices Loading Clips to the PC (USB Connection Mode) Y ou can load clips to a PC by connecting the camera recorder to the PC via the USB por t. Doing so enables clips stored in the SDH C card to be managed and edited on the PC . Files on the SDHC card can be managed/edi ted on the connected PC in this mode only f or USB mas ...

  • JVC GY-HM750CHE - page 129

    125 The switch functions of the camera recorder can be configured using the remote control unit. * Remote control uni ts suppor ted:RM-LP25U , RM-LP55U, RM-LP57U 1 Connect the remote contr o l unit to the camera recorder . Connect the remote cable of the remote control unit to the [REMO TE] terminal on the te r minal area of th e camera recorder . ...

  • JVC GY-HM750CHE - page 130

    126 Connecting External Devices List of Remote C ontrol Unit Functions 䡵 RM-LP25U 䡵 RM-LP55U Remote Contr ol Unit Connection (continued) Function 3 : A vailable - : Not available SHUTTER NORMAL 3 1/100* 1 , 1/120* 2 3 1/250 3 1/500 3 1/1000 3 1/2000 3 V ARIABLE * 5 3 SPEED GAIN -6dB - - 3 dB - 0dB 3 3 dB 3 6dB 3 9dB 3 12dB 3 15dB 3 18dB 3 ALC 3 ...

  • JVC GY-HM750CHE - page 131

    127 䡵 RM-LP57U *1 : Only when the [Fr ame & Bit Rate] of the camera recorder is A 60 B , A 3 0 B , or A 24 B . *2 : Only when the [Fr ame & Bit Rate] of the camera recorder is A 50 B or A 25 B . * 3 : Switches automatically to A NORMAL B when both [STRETCH] and [COMPRESS] are set to A Off B . *4 : Only when [T ally System] in the [Others. ...

  • JVC GY-HM750CHE - page 132

    128 Others Alar m displays on the LCD monitor and viewfinder screens, as well as the tally lamps and alarm tones are output as follows according to the alar m status. M em o : ● This camera recorder make s use of a microcomputer . Noise interf erence from external sources ma y pre vent it from functioning proper ly . When this occurs, turn off an ...

  • JVC GY-HM750CHE - page 133

    129 T ally Lamps The tally lamps star t blinking when the remaining space on the SDHC card is runn ing out during record ing, or when the batter y pow er is running low . Alarm T one Alar m tone is output from the monitor speaker and [P HON ES] ter minal when the ba tter y le vel is low . Alar m tone is output from the monitor speaker and [PHONES] ...

  • JVC GY-HM750CHE - page 134

    130 Others T roub leshooting Symptom Action P ower does not turn on. ● Is the AC adapter proper ly connected? ● Is the batter y charged? ● Is the power turned on immediately after it is tur ned off? Make sure to wait fo r an inter val of at least 5 secon ds bef ore tur ning on the power again. Unable to start recording. ● Is the reco rd b u ...

  • JVC GY-HM750CHE - page 135

    131 General Camera Section Lens Section (GY-HM750U/GY-HM750E onl y) Storage Section Symptom Action The date and time are not display ed. ● The date and time are only disp la yed on the ST A TUS 2 and ST A T US 3 screens in the Camera mode (during shootin g). ( A P age 104, 105) No output fr om the [Y/VIDEO], [PB], and [PR] video signal output ter ...

  • JVC GY-HM750CHE - page 136

    132 Others T erminal Section Video/A udio Accessories Specifications (continued) [Y/VIDEO], [PB], and [PR] analog video outp ut terminals Analog compo site output (480i o r 576i: Downconverted, 4: 3 /16:9) : 1.0 V (p-p), 75 K , BNC (unbalanced) Component output (720p/1080i) : Y : 1.0 V (p-p), 75 K Pb , Pr : 0.7 V (p-p), 75 K , BNCx 3 (unbalanced) [ ...

  • JVC GY-HM750CHE - page 137

    133 Dimensional Outline Drawing (Unit: mm) 2 3 1 (166) 210 291 90 40 95 242. 3 225 82. 3 (82. 3 ) 108.5 1 33 56 209 3 0 44.6 59.8 2 3 1 (166) 210 3 04 90 40 95 242. 3 225 82. 3 (82. 3 ) 108.5 1 33 56 209 3 0 44.6 59.8 * The specifications and appearance of th is product are su bject to changes for fu r ther improv ement without prior notice. (VF MO ...

Manufacturer JVC Category Professional video camera

Documents that we receive from a manufacturer of a JVC GY-HM750CHE can be divided into several groups. They are, among others:
- JVC technical drawings
- GY-HM750CHE manuals
- JVC product data sheets
- information booklets
- or energy labels JVC GY-HM750CHE
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC GY-HM750CHE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC GY-HM750CHE, service manual, brief instructions and user manuals JVC GY-HM750CHE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC GY-HM750CHE.

Similar manuals

A complete manual for the device JVC GY-HM750CHE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC GY-HM750CHE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC GY-HM750CHE.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC GY-HM750CHE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC GY-HM750CHE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC GY-HM750CHE, that we can find in the current document
3. Tips how to use the basic functions of the device JVC GY-HM750CHE - which should help us in our first steps of using JVC GY-HM750CHE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC GY-HM750CHE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC GY-HM750CHE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC GY-HM750CHE?

Use the form below

If you did not solve your problem by using a manual JVC GY-HM750CHE, ask a question using the form below. If a user had a similar problem with JVC GY-HM750CHE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)