English dropdown-ico

Manual Aiwa CT-X432M

10 pages 0.19 mb
Download

Go to site of 10

Summary
  • Aiwa CT-X432M - page 1

    CT -X432M YU STEREO CAR CASSETTE RECEIVER RADIO-CASSETTE ESTEREOFONICO PARA AUTOMOVIL OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the bottom side of your set) in the space provided below. Please refer to them when you contact y ...

  • Aiwa CT-X432M - page 2

    1 ENGLISH PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. • ...

  • Aiwa CT-X432M - page 3

    ENGLISH 2 ENGLISH 2 THEFT PROTECTION Take the front panel with you when leaving the car, and keep it in the supplied carrying case. Detaching the front panel Before detaching the front panel, remove the cassette to prevent possible damage to the unit. 1 Press z to remove the cassette. 2 Press and hold PWR/MUTE until the unit turns off. 3 Press % . ...

  • Aiwa CT-X432M - page 4

    3 ENGLISH 3 ENGLISH Adjusting sound You can select the following modes for adjusting sound depending on the music you listen to: BASS (low frequencies), TRE (high frequencies), BAL (left/right), FAD (front/rear) and H-BASS (high bass). 1 Press SEL repeatedly to select the mode to be adjusted. Pressing SEL cycles through the modes. The selected mode ...

  • Aiwa CT-X432M - page 5

    ENGLISH 4 ENGLISH 4 1 Press BAND repeatedly to select the desired band (F1, F2, F3, A1, or A2). 2* Press i (to move to higher frequencies) or k (to move to lower frequencies) to tune in to a station. “ ST ” appears in the display when an FM station is broadcasting in stereo, and receiving conditions are good. *Seek Tuning and Manual Tuning • ...

  • Aiwa CT-X432M - page 6

    5 ENGLISH 5 ENGLISH T APE PLA YB A CK SRC g f z Playing a tape 1 Insert a cassette to start playback. If a cassette is already inserted, press SRC repeatedly to select Tape Play mode to start playback. Playback starts in the direction that the unit played back previously. Press the following buttons to operate tape transport. * When you eject the c ...

  • Aiwa CT-X432M - page 7

    ENGLISH 6 ENGLISH 6 A UXILIAR Y EQUIPMENT Listening to a CD/MD/MP3 portable player or other equipment You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information. Be sure to remove the inserted cassette to prevent possible damage to the unit before connecting t ...

  • Aiwa CT-X432M - page 8

    7 ENGLISH TROUBLESHOOTING Error code (when using the optional AIWA CD Changer) In the following cases the corresponding error code indication appears. Follow the suggestions below to solve the problem. If the error code indication does not disappear, consult an AIWA service center. ERROR01 The disc magazine is not properly inserted in the CD Change ...

  • Aiwa CT-X432M - page 9

    SPECIFICA TIONS RADIO SECTION (FM) Frequency Range: 87.5 MHz – 108 MHz Usable Sensitivity: 12.7 dBf 50 dB Quieting Sensitivity: 17.2 dBf IF Rejection: 100 dB Frequency Response: 30 Hz – 15,000 Hz S/N Ratio: 70 dB Stereo Separation: 35 dB at 1 kHz Alternate Channel Selectivity: 90 dB Capture Ratio: 3 dB (AM) Frequency Range: 530 kHz – 1,710 kH ...

  • Aiwa CT-X432M - page 10

    Printed in Indonesia ...

Manufacturer Aiwa Category Car Receiver

Documents that we receive from a manufacturer of a Aiwa CT-X432M can be divided into several groups. They are, among others:
- Aiwa technical drawings
- CT-X432M manuals
- Aiwa product data sheets
- information booklets
- or energy labels Aiwa CT-X432M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Aiwa CT-X432M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Aiwa CT-X432M, service manual, brief instructions and user manuals Aiwa CT-X432M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Aiwa CT-X432M.

Similar manuals

A complete manual for the device Aiwa CT-X432M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Aiwa CT-X432M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Aiwa CT-X432M.

A complete Aiwa manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Aiwa CT-X432M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Aiwa CT-X432M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Aiwa CT-X432M, that we can find in the current document
3. Tips how to use the basic functions of the device Aiwa CT-X432M - which should help us in our first steps of using Aiwa CT-X432M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Aiwa CT-X432M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Aiwa CT-X432M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Aiwa CT-X432M?

Use the form below

If you did not solve your problem by using a manual Aiwa CT-X432M, ask a question using the form below. If a user had a similar problem with Aiwa CT-X432M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)