Manual Husqvarna PP 418

20 pages 1.92 mb
Download

Go to site of 20

Summary
  • Husqvarna PP 418 - page 1

    Operator’s Manual Read these instructions carefull y and mak e sure you understand them bef ore using the PP 418. Manuel d’utilisation V euillez lire attentiv ement ces instructions et assur ez-vous de bien les comprendr e a vant d’utiliser la machine modèle PP 418. Manual del operador Lea cuidadosamente estas instrucciones y asegúrese de q ...

  • Husqvarna PP 418 - page 2

    INTRODUCTION Common sense: The focus of this manual is HOW to operate and service the equipment safely . It is not possible to cover every conceivable situation you can face when using this equipment. Therefore use this product only in a manner described in this manual. Operation or handling the machine in any other manner can lead to serious injur ...

  • Husqvarna PP 418 - page 3

    3 REGISTER THE PRODUCT Please register your new Power Pack with Husqvarna Construction Products by mailing in the registration card that came with the machine or you can register on the internet site www .husqvarnawarranty .com Registration will allow us to contact in case of any critical updates or recalls on this machine. W arranty registration h ...

  • Husqvarna PP 418 - page 4

    CONTENTS Content Page I ntroduction, personal safety ...................... 2 Registration of the product ………………… 3 General safety message............................. 3 T able of contents ………………………….. 4 What is what? ............................................ 5 Decals ............................................ ...

  • Husqvarna PP 418 - page 5

    WHA T IS WHA T B A C F D E G K P M N H O L Q S T U J R V W What is what? More information on page A. Lifting eyelet................................................ 4 B. Rack for hydraulic hoses C. Fuel gauge/fuel cap.................................... 8 D. Choke lever E Lock for handle F . Transport handle G. Battery .............................. ...

  • Husqvarna PP 418 - page 6

    6 DECALS AND LOCA TIONS HYDRAULIC OIL ISO-46 HYDRAULIC OIL ISO-46 Part number: 542 16 90-65 Part number: 541 20 76-21 Part number: 541 20 76-22 Part number: 501 98 70-01 Part number: 510 19 10-01 Part number: 510 19 09-01 Part number: 510 19 09-02 Part number: 510 19 08-01 Part number: 510 04 40-01 ...

  • Husqvarna PP 418 - page 7

    7 WHA T TOOLS CAN BE POWERED The PP 418 power pack is equipped with an adjustable fl ow hydraulic pump which produces hydraulic power more ef fi ciently than a more commonly used fi xed displacement gear pump. The PP 418 power pack is suited to power any hydraulic tool with the following speci fi cations; Hydraulic valve: “ Open Center” Flo ...

  • Husqvarna PP 418 - page 8

    8 FUEL HANDLING PROPER FUEL T aking the following precautions will lessen the risk of injury and property damage: - Use extreme care in handling gasoline. It is extremely fl ammable and the vapors are explosive. - Extinguish all cigarettes, cigars, pipes, and other sources of ignition. - Use only approved gasoline containers. - Never remove gas ca ...

  • Husqvarna PP 418 - page 9

    9 ASSEMBL Y NOTICE The PP 418 power pack must be serviced before use. In some markets the power pack will be delivered fi lled with both engine oil and hydraulic oil. Remove the power pack from its shipping material and place it on a level surface. Step 1 Check the engine oil level. If no oil is present on the dipstick add oil in accordance to the ...

  • Husqvarna PP 418 - page 10

    10 SER VICING THE BA TTER Y Use the following procedure when removing, installing and attaching the battery cables. The battery is located in the support foot of the power pack. T o access the battery you will need another person helping you. Step 1 Remove the two M8 bolts using a 10 mm wrench. Keep the two bolts nearby for Step 3 W ARNING - Connec ...

  • Husqvarna PP 418 - page 11

    11 CONTROLS - OPERA TION Choke Lever Ignition Switch Flow Selector Throttle Control IGNITION SWITCH STOP – Kills the engine – no power to any of the electrical devices. RUN – Run position for the engine. Please note that the hour meter will collect time whether or not the engine is running. If the key is left in the RUN position the battery w ...

  • Husqvarna PP 418 - page 12

    12 ST ARTING CHECKLIST BEFORE YOU OPERA TE THE POWER P ACK, PLEASE REVIEW THE FOLLOWING CHECKLIST : - Have you read and do you understand ALL instructions and warnings in this manual? - Is the battery properly charged and installed? (page 10) - Are the tires properly in fl ated? (page 9) - Is the engine oil at the proper level? (page 9) - Is the f ...

  • Husqvarna PP 418 - page 13

    13 ADJUSTING THE AUTOMA TIC THROTTLE GENERAL DESCRIPTION The AUTOMA TIC THROTTLE function is triggered by an adjustable pressure switch located on the hydraulic manifold. When the fl ow selector is set to (for example) 40 liters (10 gal), that amount of oil will circulate through the hoses and through the tool and back to the tank. The circulation ...

  • Husqvarna PP 418 - page 14

    14 Engine Oil Checking, Adding and Changing Oil Always check the oil level before starting the engine. Keep oil level at FULL. Do not over fi ll. Check level daily , or after every eight (8) hours of use. Note: Engine holds approximately 1.4 liters (1.5 quart) when changing oil and oil fi lter . Always place the Power Pack on a level surface when ...

  • Husqvarna PP 418 - page 15

    HYDRAULIC MAINTENANCE SYSTEM MAINTENANCE Daily 1. Check hydraulic oil level. Make sure that the oil level on the sight glass is above the lower limit indicated. Add oil as needed. HYDRAULIC SYSTEM SPECIFICA TIONS Oil T ank volume: 10 liter (2.6 gal) Oil T ype: ISO 46 (see page 8) Hydraulic Filter (large): 510 02 33-01 25 Micron fi lter Hydraulic F ...

  • Husqvarna PP 418 - page 16

    16 TECHNICAL SPECIFICA TIONS Weight and Dimensions PP 418 Weight – dry without hoses 127 kg 280 lbs Weight with oil but without gasoline 135 kg 298 lbs Weight - hose set ½” x 7.5 m (25 feet) – dry 8.5 kg 19 lbs Weight - hose set – with oil 10 kg 22 lbs Length (handle folded in) 895 mm 35 inch Length (handle folded out) 1300 mm 51 inch Widt ...

  • Husqvarna PP 418 - page 17

    17 W ARRANTY HUSQV ARNA EQUIPMENT W ARRANTY New Hydraulic Power Packs sold by Husqvarna Construction Products are warranted to be free from manufactur- ing defects in normal service for a period of one (1) year from date of purchase by the original consumer purchas- er . Please see the enclosed warranty registration card for the complete warranty s ...

  • Husqvarna PP 418 - page 18

    18 CONFORMITY CERTIFICA TES CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt Of f-Road Ap plication as relating to CARB standards. Under construction equipment, and in particular , as a Hydraulic Power Pack (Power pack: hydraulic), with engine power less than 19KW (25hp), CARB standards do not apply to this machine. For m ...

  • Husqvarna PP 418 - page 19

    19 ...

  • Husqvarna PP 418 - page 20

    2008-31 510 02 98-01 Printed In U .S.A. ...

Manufacturer Husqvarna Category Webcam

Documents that we receive from a manufacturer of a Husqvarna PP 418 can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- PP 418 manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna PP 418
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna PP 418.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna PP 418, service manual, brief instructions and user manuals Husqvarna PP 418. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna PP 418.

Similar manuals

A complete manual for the device Husqvarna PP 418, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna PP 418 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna PP 418.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna PP 418 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna PP 418, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna PP 418, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna PP 418 - which should help us in our first steps of using Husqvarna PP 418
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna PP 418
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna PP 418 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna PP 418?

Use the form below

If you did not solve your problem by using a manual Husqvarna PP 418, ask a question using the form below. If a user had a similar problem with Husqvarna PP 418 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)