Manual HP (Hewlett-Packard) LC 2000

7 pages 0.29 mb
Download

Go to site of 7

Summary
  • HP (Hewlett-Packard) LC 2000 - page 1

    HP NetServer LC 2000 with NetRAID-3Si (HP Rack Storage/12) Cluster Configuration Guide 14 November 2000 (see Versions at the end of this document) Introduction This document defines the supported HP NetServer LC 2000 configuration with HP Rack Storage/12s and Microsoft Cluster Server. These configurations minimize single points of failure (SPOF), a ...

  • HP (Hewlett-Packard) LC 2000 - page 2

    2 supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU’s) are strongly recommended. System software: Navigator version L.18.00 or later Operating System Microsoft Windows NT Server 4.0, Enterprise Edition Service pack SP6A or later SPU Model HP NetServer LC 2000 Clock speed 533, 600, 667, 733, 800, 933, 1000 MH ...

  • HP (Hewlett-Packard) LC 2000 - page 3

    3 SCSI IDs 6, 7 Channels 0, 1, 2 RAID level 1, 5, 10, 50 Logical disks 1 per RAID array 8 maximum per NetRAID-3Si adapter Configuration options: Cluster mode on Cache write-policy to Write-thru Set any other options as desired Cabinet RAID arrays A RAID array (logical disk) must be composed of all the same disk model (i.e., part number and suffix). ...

  • HP (Hewlett-Packard) LC 2000 - page 4

    4 NIC: Model Embedded NIC Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Driver Hptxnt.sys 3.27.00.0001 or later The vendor supported driver. NOTE If the NIC used is the same type as the embedded NIC (D5013A/B), then the Client LAN NIC must use the same driver as the Intra-cluster NIC. No. of NICs 1 1 ...

  • HP (Hewlett-Packard) LC 2000 - page 5

    NOTES: 1. 2. Another NetRAID-xSi Adapter may be installed in server for local storage.This diagram depicts using slot P5 for the shared storage NetRAID-3Si. 3. Cables between the servers and shared storage cabinets can be any HP LVD SCSI (offset) cable up to 10 meters. See “Cables” for Rack Storage/12 in the guide for a list of cables that can ...

  • HP (Hewlett-Packard) LC 2000 - page 6

    6 Power Cabling to Separate Power Sources ...

  • HP (Hewlett-Packard) LC 2000 - page 7

    7 Versions 14 November 2000 Added 1000 MHz. Corrected mraid35x.sys to mraidnt.sys. 5 September 2000 Removed draft status 25 August 2000 Changed introduction, added 800, 933 MHz, new boot device definition boot order, driver info and Ultra3 HDDs. Rolled 3Si firmware/BIOS. 19 May 2000 Added BIOS disabled qualifier. 25 April 2000 Added NetRAID driver ...

Manufacturer HP (Hewlett-Packard) Category Life Jacket

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) LC 2000 can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- LC 2000 manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) LC 2000
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) LC 2000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) LC 2000, service manual, brief instructions and user manuals HP (Hewlett-Packard) LC 2000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) LC 2000.

A complete manual for the device HP (Hewlett-Packard) LC 2000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) LC 2000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) LC 2000.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) LC 2000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) LC 2000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) LC 2000, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) LC 2000 - which should help us in our first steps of using HP (Hewlett-Packard) LC 2000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) LC 2000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) LC 2000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) LC 2000?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) LC 2000, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) LC 2000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)