Manual Roland KCW-1

12 pages 0.76 mb
Download

Go to site of 12

Summary
  • Roland KCW-1 - page 1

    Owner’s Manual Thank you, and congratulations on your choice of the Roland Powered Subwoofer KCW-1. 201b These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in i ...

  • Roland KCW-1 - page 2

    2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilater ...

  • Roland KCW-1 - page 3

    3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 001-50 • Connect mains plug of this model to a mains socket outlet with a protective earthing connection. ........... ...

  • Roland KCW-1 - page 4

    4 012a • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page when: • The power-supply cord, or the plug has been damaged; or • If smoke or unusual odor occurs • Objects ha ...

  • Roland KCW-1 - page 5

    5 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4, please read and observe the following: Power Supply 301 • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as ...

  • Roland KCW-1 - page 6

    6 Panel Descriptions ■ Control Section fig.20 1. VOLUME knob This adjusts the total volume level of the unit’s internal speaker. 2. CROSSOVER knob This adjusts the frequency range played back from the unit’s speaker. Adjust this according to the low-frequency playback capabilities of the connected device, as well as the performance environmen ...

  • Roland KCW-1 - page 7

    7 Panel Descriptions THRU OUT Section 7. THRU OUT jacks Signals input to the INPUT jacks are output here unchanged. These are convenient when connecting to devices that have no SUBWOOFER OUT. For detailed connection instructions, refer to “Instructions for Connecting to Devices With No SUBWOOFER OUT” (p. 9). Two types of connectors are provided ...

  • Roland KCW-1 - page 8

    8 Connect your KCW-1 Instructions for Connecting to Devices Equipped with SUBWOOFER OUT Connectors (Mono Connection) When connecting to devices equipped with SUBWOOFER OUT connectors, make the connections between the KCW-1 and other devices after referring to the following figure. fig. Use a 1/4” phone audio cable to connect the SUBWOOFER OUT on ...

  • Roland KCW-1 - page 9

    9 Connect your KCW-1 Instructions for Connecting to Devices With No SUBWOOFER OUT When connecting to devices with no SUBWOOFER OUT connectors, connect such equipment to the KCW-1 after referring to the following figure. Input signals from the VS Series and other output devices to the INPUT connectors. Connect DS Series powered monitors or similar d ...

  • Roland KCW-1 - page 10

    10 Connect your KCW-1 Switching the Power On and Off 941 Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 1. Make sure that all volume controls on the KCW-1 and connected d ...

  • Roland KCW-1 - page 11

    11 Block Diagram fig.50 Main Specifications KCW-1: Powered Subwoofer Rated Power Output 200 W Nominal Input Level (100 Hz) Input: +4 dBu (XLR type, 1/4” phone type) Nominal Output Level (100 Hz) Thru Out: +4 dBu (XLR type, 1/4” phone type) * 0 dBu = 0.775 Vrms Speaker 25 cm (10 inches) x 1 Controls VOLUME Knob CROSSOVER Knob BOTTOM Switch PHASE ...

  • Roland KCW-1 - page 12

    SD000225 3DH KCW-1_e.book 12 ページ 2006年9月8日 金曜日 午前11時50分 ...

Manufacturer Roland Category Speaker

Documents that we receive from a manufacturer of a Roland KCW-1 can be divided into several groups. They are, among others:
- Roland technical drawings
- KCW-1 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland KCW-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland KCW-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland KCW-1, service manual, brief instructions and user manuals Roland KCW-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland KCW-1.

Similar manuals

A complete manual for the device Roland KCW-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland KCW-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland KCW-1.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland KCW-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland KCW-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland KCW-1, that we can find in the current document
3. Tips how to use the basic functions of the device Roland KCW-1 - which should help us in our first steps of using Roland KCW-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland KCW-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland KCW-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland KCW-1?

Use the form below

If you did not solve your problem by using a manual Roland KCW-1, ask a question using the form below. If a user had a similar problem with Roland KCW-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)