Manual Cisco Systems ICM Software Version 4.5

328 pages 2.5 mb
Download

Go to site of 328

Summary
  • Cisco Systems ICM Software Version 4.5 - page 1

    Cisco ICM Software Supervisor Guide ICM Software Version 4.5 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (64387) Fax: 408 526-4100 Customer Order Number : DOC-7811588 = Text Part Number: 78-11588-01 ...

  • Cisco Systems ICM Software Version 4.5 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE ...

  • Cisco Systems ICM Software Version 4.5 - page 3

    iii Contents Contents Preface ........................................................................................ xiii Purpose ................................................................................................... xiii Audienc e..................................................................................................x iii ...

  • Cisco Systems ICM Software Version 4.5 - page 4

    iv Contents 2.2.3. Monitor-Onl y A W ....................................................................... 40 2.2.4. Admin W orkstation Users .......................................................... 41 2.2.5. Open Datab ase Arc hitecture ..................................................... 41 2.3. Monit or ICR Reporting ....................... ...

  • Cisco Systems ICM Software Version 4.5 - page 5

    Contents v Contents 4. Reporting Basics ................................................................... 69 4.1. The G EO T EL A dmin Workst ation Group .............................................. 70 4.2. Starting M onitor ICR ............................................................................. 71 4.2.1. Toolbar O ptions ............ ...

  • Cisco Systems ICM Software Version 4.5 - page 6

    vi Contents 5. Setting Thresholds and Drill-Downs .................................. 107 5.1. Setting T hresholds in Reports .......................................................... 108 5.1.1. Setting Thresholds in Mult iple-C omponent R eports ................ 109 5.1.2. Saving T hreshold Setti ngs ............................................... ...

  • Cisco Systems ICM Software Version 4.5 - page 7

    Contents vii Contents 7.6. Trunk Group Dat a ............................................................................... 146 7.7. Netw ork Trunk Group Data ................................................................ 147 7.8. Service Array Data .............................................................................. 147 7.9. Route Dat ...

  • Cisco Systems ICM Software Version 4.5 - page 8

    viii Contents entsk g09_normali zed_agt_state ........................................................... 195 entsvc01_q ueue_del ay_status ............................................................. 196 entsvc02_c alls_stat us ........................................................................... 197 entsvc03_ef fect_of _aban_on_ser vicelev ...

  • Cisco Systems ICM Software Version 4.5 - page 9

    Contents ix Contents persvc12 _calls_anal ysis_half _hour ...................................................... 261 persvc13 _calls_off ered_daywise _graph ............................................... 263 persvc14 _calls_handl ed_da y wis e_graph ............................................. 264 persvc15 _calls_aband oned_da ywise_graph ....... ...

  • Cisco Systems ICM Software Version 4.5 - page 10

    x Contents Figures Figure 1: I CR Call Routin g .................................................................................. 18 Figure 2: I ntellige nt Call Router Overv iew ........................................................... 19 Figure 3: I CR Call Flow Diagram ........................................................................ 2 ...

  • Cisco Systems ICM Software Version 4.5 - page 11

    Contents xi Contents Tabl es Table 1: Aspect, Luc ent, and N ortel—ICR T erminolog y Mapping ...................... 33 Table 2: Rock well and Siem ens—ICR Term inology Map ping ............................ 34 Table 3: A lcatel, NEC, and Ericsson—ICR Term inology Mapp ing ..................... 34 Table 4: F eatures Not Support ed for Sp ecific ...

  • Cisco Systems ICM Software Version 4.5 - page 12

    xii Contents ...

  • Cisco Systems ICM Software Version 4.5 - page 13

    xii i Preface Preface Purpose This manual describes how to monito r enterp rise call center ac tivity with the real- tim e and historical r eporting features o f the G EO T EL I ntellig ent Call Router (I CR). Audience This do cument i s intend ed for the I ntellig ent Cal l Router superv isor. The supervis or has an unde rstanding of call cente r ...

  • Cisco Systems ICM Software Version 4.5 - page 14

    xiv P ref ace Chapter 6, “ Sche duling Repor ts” Describes how t o schedule r eports to p rint autom atically by using the ICR Job Schedu ler tool. Chapter 7, “Availab le Data” Describes th e most com monly used da ta availab le in the I CR database s. Chapter 8, “Template R eferen ce” Docum ents the prede fined repor t tem plates that ...

  • Cisco Systems ICM Software Version 4.5 - page 15

    Preface xv Preface Other Publi cations  Intellig ent Ca l l Router Custom Screen Bui lder Tutorial  Intellig ent Ca l l Router Database Sch ema Handbook  Intellig ent Ca l l Router Instal lation Guide  Intellig ent Ca l l Router Planning Gu ide  Intellig ent Ca l l Router Product Desc ription  Intellig ent Ca l l Router Quick S ta ...

  • Cisco Systems ICM Software Version 4.5 - page 16

    xvi Pre face ...

  • Cisco Systems ICM Software Version 4.5 - page 17

    17 1. Overview 1. Overview The G EO T EL Intellig ent Call Router (ICR ) improv es the level o f customer s ervice of fered by g eographica lly distrib uted call cente rs. The In telligent Ca ll Router ’s m ain funct ion is to r oute toll- free ca lls to the most approp riate ag ent or an swering resou rce avai lable. The system also provides a s ...

  • Cisco Systems ICM Software Version 4.5 - page 18

    18 Overview 1.1. What is the In tellig ent Ca l l Router ? The I ntellig ent Ca l l Router (I CR) is a software- based call p rocessing system that prov ides call- by-call rout ing to geog raphically distribu ted call cente rs. The I CR link s agents from multiple call cent ers to cre ate a virtua l call cen ter . In the v irtual call center m odel ...

  • Cisco Systems ICM Software Version 4.5 - page 19

    W hat is the Intelligent CallRout er ? 19 1. Overview 1.1.1. Where Does t he ICR Fit In? The I ntellig ent Ca l l Router works direc tly with ca ll centers a nd the interex chang e car rie r (I XC ) tha t suppl ies the to ll- free servic e. The I XC is a long -dis tance tel ephone com pany that offer s toll- free call rou ting service s. Figure 2 s ...

  • Cisco Systems ICM Software Version 4.5 - page 20

    20 Overview 1.1.2. Call Routing A typical I CR-routed c all goes th rough the fo llowing stag es. Figure 3 illustra tes these stages in d etail.  The I ntellig ent Call Rou ter is consta ntly rece iving data from cal l centers on ag ent avail ability , queue statu s, and call h andling perform ance. ô A caller dials the toll- free number. í Th ...

  • Cisco Systems ICM Software Version 4.5 - page 21

    W hat is the Intelligent CallRout er ? 21 1. Overview 1.1.3. Pre- Routing The I ntellig ent Ca l l Router uses Pre- Routing ® to ensu re that in coming calls reac h the approp riate agen t resou rce the f irst tim e. In Pre- Routing, the IC R executes ro uting decisio ns befo re the cal l terminat es at a ca ll center. As shown in Figure 3, ev ery ...

  • Cisco Systems ICM Software Version 4.5 - page 22

    22 Overview See also: For m ore inform ation on En terprise C TI, see the I ntellig ent Ca l l Rou ter Product Descrip tion . 1.1.6. Call Routing Scripts To dete rmine the be st des tination for a call, the I CR processes rou ting requests th rough ca ll routing scripts . A routing script is a graphical, flowchar t-lik e diagram that specif ies how ...

  • Cisco Systems ICM Software Version 4.5 - page 23

    The Call Center Enterprise 23 1. Overview Although th is manag ement data is essentia l to call routing , it is also importan t for m onitoring and reporting on agent and agent grou p perform ance. The I CR stores the m anagem ent data in indus try-standa rd historica l and real- tim e relational da tabases. The I ntellig ent Ca l l Router provid e ...

  • Cisco Systems ICM Software Version 4.5 - page 24

    24 Overview From a repor ting persp ective, y ou can view agent and call rout ing statist ics on an ent erprise- wide or peri pheral-by- peripheral b asis. Enterprise r eporting g ives you a v iew of perform ance across t he entire call cente r enterpr ise. Periphe ral report ing focuses y our repor ts on specific a reas of th e call cen ter enter ...

  • Cisco Systems ICM Software Version 4.5 - page 25

    The Call Center Enterprise 25 1. Overview across pe ripherals t o form an enterprise Sa les servic e. Figure 5 shows the relat ionship between ent erprise and periphera l services. Enterprise Services AC D AC D AC D Dallas Tech. Support Dallas Info. Services Boston Tech. Support Boston Info. Services Sales Technical Support Information Services Per ...

  • Cisco Systems ICM Software Version 4.5 - page 26

    26 Overview Figure 6 sh ows the relat ionship between en terprise and periphe ral skill groups. Enterprise Skill Groups AC D AC D AC D HelpDesk HelpDesk Pri. HelpDesk Sec. Spa nis h Spanish Pri. Spanish Sec. Peripheral Skill Groups Denver.He lpDesk Denver. HelpDe sk.P ri Denver.H elpDesk. Sec Denver.Spanish Denver.Spanish . Pri Denver.Spanis h.Sec ...

  • Cisco Systems ICM Software Version 4.5 - page 27

    The Call Center Enterprise 27 1. Overview 1.2.2. A gents and A gent Teams Within the call cen ter enterp ri se, an agent is a nyone who can answe r incoming phone calls. A periphera l agent is an ag ent who is associated with a parti cular periphe ral (ACD, PBX) in th e call ce nter ente rprise. A peripheral agent can be a mem ber of one or m ore s ...

  • Cisco Systems ICM Software Version 4.5 - page 28

    28 Overview A network trunk g roup is a g roup of trunk s organized to reflect t he routing cl ient’s view of trunks. A network trunk g roup can map to one o r more perip heral tru nk g roups. For example, say you have two VRUs at a call cente r site in D allas. Each VRU ha s two T1 circu its (see Fig ure 8). ACD2 ACD1 NY.Megacom.Trkgrp103 NY.Meg ...

  • Cisco Systems ICM Software Version 4.5 - page 29

    The Call Center Enterprise 29 1. Overview Figure 9 sh ows an exam ple of how serv ice arrays re late to per ipheral service s and network trunk g roups. DAL Trunks T1’s Network Trunk Gro up R o ut i n g C l i e nt (IXC, PG) VRU 1 VRU 4 VRU 3 VRU 2 Dal _VRU1 .Sal es Se r vi ce Array Dal _VRU1. Help Dal_ VRU 2.Sales Dal _VRU 3.Sales D al_VRU4.S ale ...

  • Cisco Systems ICM Software Version 4.5 - page 30

    30 Overview Routes are as sociated with a single pe ripheral a nd are not o rganized on an enterpr ise-wide bas is. Figure 10 shows som e examples of rou tes and how they m ap to individua l peripher al targ ets. Routes Denver Sales Den ver.Sales.Pri Agent 325 Denver.Trunks + DNIS ACD ACD ACD Dallas.Sales Dallas .Sales.Pri Agent 81 Dallas.Trunks + ...

  • Cisco Systems ICM Software Version 4.5 - page 31

    The Call Center Enterprise 31 1. Overview Call Types A call type i s a categ ory of incom ing calls. C alls are categ orized ba sed on dialed num ber (DN), calle r-entered digits (CED), and calling line ID (CLID). Each cal l type has a schedule th at determ ines which rou ting script or s cripts are a ctive for tha t call ty pe at any tim e. In rep ...

  • Cisco Systems ICM Software Version 4.5 - page 32

    32 Overview 1.3. Per ipheral -Speci fi c Terminolog y The I CR supports severa l models o f call cen ter peripher als. Specif ically , the ICR support s the following ACDs:  Alcatel 4400  Aspect Cal lCenter  Ericsson ACP1000  Lucent DEFINI TY ECS  NEC NEAX 2400  Nortel DMS-100, SL- 100  Nortel Meridi an  Rockwell Ga laxy  ...

  • Cisco Systems ICM Software Version 4.5 - page 33

    Peripheral-Specific T erminology 33 1. Overview Tabl e 1 : Aspect, Lucent, and Nortel—ICR Terminology Mapping G EO T EL ICR Aspect CallCenter Lucent DEFINITY ECS Nortel DM S- 100/ SL-100 Nortel Merid ian Service Application Vector Directory Number (VDN) Prim ary or su ppl em ent ary ACD DN ACD Directory Number (ACD DN) or ACD Controlled Directory ...

  • Cisco Systems ICM Software Version 4.5 - page 34

    34 Overview Table 2: Rockwell and Siemens —ICR Terminology Mappi ng G EO T EL ICR Rockwell Spectrum Rockw ell Galaxy Siemens HICOM 300E (90 06) Siemens Ro lm 9751 CB X (9005) Service Application Gate ACD Routi ng T a b le (ART) Pilot Nu mber associated with ART Skill Group Agent group Primary, secondary, an d tertiary groups for a gate. ACD Group ...

  • Cisco Systems ICM Software Version 4.5 - page 35

    Peripheral-Specific T erminology 35 1. Overview The I CR comprises a se t of the fun ctions of the supported pe ripherals. Because th e feature s of each AC D vary , one type of ACD can not tak e advantag e of every capability the ICR offers. Som e ACDs hav e limita tions th at preven t them from ma king full use o f spec ific fea tures of the IC R ...

  • Cisco Systems ICM Software Version 4.5 - page 36

    36 Overview Peripheral Type Restrictions Rockwell Spectr um No trunk group monitoring. Duplex ed PG operation s upported on ly for TCP/ IP Transaction L ink configu rations. Si em ens HICOM 300E (9 006) No tr unk gro up mo nitor i ng. Limited conferen ce call monitoring. Si emen s/R olm 9751CBX ( 9005) No Post- Routin g or tra nslatio n routi ng. G ...

  • Cisco Systems ICM Software Version 4.5 - page 37

    37 2. Admin Workstation 2. The Admin Workstation The Adm in Worksta tion (AW) is the hum an interf ace to the I ntellig ent Call Router . The Admin Work station is a PC running G EO T EL soft ware on the Micro soft ® Windows NT ™ opera tin g sys te m. Ad min Worksta tions can be lo cated thro ughout th e call cen ter ente rprise. Using the Adm i ...

  • Cisco Systems ICM Software Version 4.5 - page 38

    38 The Admin W orkstation 2.1. The G EO T EL A dmin Workstation Group Each Adm in Workstation contains th e G EO T EL Adm in Work station group. When open, the G EO T EL Adm in Workstat ion group appears as follows: Not all A Ws have an identical se ts of tool s. The too ls on each A W may vary depending on the I CR features you order ed. In g ener ...

  • Cisco Systems ICM Software Version 4.5 - page 39

    Distributor and Client Adm in W orkstations 39 2. Admin Workstation  Lock Admin . Lets you check or change t he status of locks in the ICR centra l database.  Monitor ICR . Lets you view g raphs and reports t o monitor the perform ance of speci fic agents, sk ill groups, services, and other groups within the ICR call c enter enter prise.  ...

  • Cisco Systems ICM Software Version 4.5 - page 40

    40 The Admin W orkstation Each Distribu tor AW has i ts own local dat abase that con tains a copy of data from the centra l database. The ICR’s Update AW ba ckground process a utomatica lly k eeps the loca l database synchron ized with th e central databa se. 2.2.1. Real-Time and Historical Data The I CR collects real- time and hist orical data f ...

  • Cisco Systems ICM Software Version 4.5 - page 41

    Monitor I CR Report ing 41 2. Admin Workstation 2.2.4. A dmin Workstation Users Three kind s of people u se the Adm in Worksta tion:  System Manage r . Uses the Adm in Workstation to update th e IC R system configura tion, crea te and edit call rout ing scrip ts, and download Adm in Workstatio n config uration info rmation from the central datab ...

  • Cisco Systems ICM Software Version 4.5 - page 42

    42 The Admin W orkstation You can chang e the prede fined tem plates to sui t your partic ular busin ess needs by using the optiona l ICR Custom Screen Builder. The Custom Screen Builde r is a client da tabase acce ss applica tion that is based on Powersoft  InfoMaker. The Custom Screen Builder a lso allows you to create n ew report t emplate s ...

  • Cisco Systems ICM Software Version 4.5 - page 43

    Monitor I CR Report ing 43 2. Admin Workstation 2.3.2. A gent Reporting G EO T EL • A gent Repor ting is an o ptional feat ure that c an be licensed for peripheral s (ACDs, PB Xs) in the call cente r enterpr ise. With thi s feature enabled, you can genera te reports of agent- level data thr ough Monit or ICR. (The Siem ens 9751 CBX (9005) and Roc ...

  • Cisco Systems ICM Software Version 4.5 - page 44

    44 The Admin W orkstation See also: The Inte lligent Cal l Router System Manager Guide p rovides spe cific instruct ions for enab ling ag ent-lev el reporting . Some general guideline s are present ed here. À To specify which periphera ls provide agent data: Run Configure I CR. In the Periph eral Configura tion window, se t the Agent Reporting opt ...

  • Cisco Systems ICM Software Version 4.5 - page 45

    Monitor ICR Report ing Scenario 45 2. Admin Workstation level ov er the las t half-hour. To further i nvestig ate the probl em, y ou open two add itional call ana lysis rep orts:  One report prov ides rea l-tim e data such as calls offer ed, calls abandoned, av erage speed of answer, and service levels for the Premium Sales enterp rise serv ice. ...

  • Cisco Systems ICM Software Version 4.5 - page 46

    46 The Admin W orkstation 2.4.3. Correcting th e Situation To correct t he situation, y ou consider two options :  First, y ou find out if there is an exce ss of qual ified ag ents in other skill g roups in the call cen ter enterp rise. A re these ag ents avail able to handle Premium Sales calls b etween 3:00 and 5:00 P.M.? I f they are, you ca ...

  • Cisco Systems ICM Software Version 4.5 - page 47

    W eb View 47 2. Admin Workstation  Report defin ition . A report d efinition is a fil e that s pecif ies the template s the repor t uses to retriev e data. The repo rt defin ition also specifies other v alues that the repor t includes (f or exam ple, dates and tim es, particular serv ices, ski ll groups, e tc.). Report d efinitions are sav ed as ...

  • Cisco Systems ICM Software Version 4.5 - page 48

    48 The Admin W orkstation ...

  • Cisco Systems ICM Software Version 4.5 - page 49

    49 3. Creating a Report 3. Creating a Report The Monito r ICR reporting tool allow s you to repo rt on ca ll and agen t activity throughout t he call ce nter ente rprise. You can us e real- time data, historica l data, or a com bination o f the two in a single repo rt. You can also display mu ltip le repo rts on the screen, sav e repor ts, and prin ...

  • Cisco Systems ICM Software Version 4.5 - page 50

    50 Creating a Report 3.1. The Report Examp le The repor t you will be cre ating inc ludes a rea l-time bar graph that display s call queue status da ta for se lected per ipheral serv ices. This data includes:  Averag e Delay in Q ueue  Expected De lay in Queue  Longest Call in Queue  Averag e Speed of Answer (ASA) The data f or the rea ...

  • Cisco Systems ICM Software Version 4.5 - page 51

    The Report Example 51 3. Creating a Report The com pleted repor t looks sim ilar t o the fo llowing exam ple: Often when using Monito r ICR, y ou create reports th at contain only one report component (fo r example, a real-tim e graph showing the delay in queue). I n some cases, y ou mig ht want to display real- time and h istorical data in a si ng ...

  • Cisco Systems ICM Software Version 4.5 - page 52

    52 Creating a Report 3.2. Starting Monitor IC R To start Monitor I CR, click Start, then point to Program s. In the Program s menu, point to G EO T EL Admin Work station and c lick Monitor ICR. The Monitor I CR main window appears : The Monitor I CR toolbar prov ides but tons that allow y ou to quick ly activate the most com mon functi ons (for ex ...

  • Cisco Systems ICM Software Version 4.5 - page 53

    Setti ng Up the Templ ate L aunch er 53 3. Creating a Report 3.3. Setti ng Up the Template Launcher To genera te the report, o pen the Template Launch er window. À To open the Templa te Launch er: In the Moni tor ICR window, click the New button. The Templat e Launcher window app ears: The Tem plate Launcher allows you to choose reporting options ...

  • Cisco Systems ICM Software Version 4.5 - page 54

    54 Creating a Report 2. In the From field, cl ick on the down- arrow. A calend ar appears: 3. Double-click on a day (th ree or m ore days ago). A da te is entere d in the From field. 4. For this tutoria l, do not ch ange the To field. The defau lt setti ng will provide d ata up to th e present d ay. 5. Enter 8:0 0 in the F rom tim e field by hig hl ...

  • Cisco Systems ICM Software Version 4.5 - page 55

    Setti ng Up the Templ ate L aunch er 55 3. Creating a Report You can now choose th e tem plates to use in the repo rt. À Choose th e Templa tes: In the Tem plates tab, choose th e following tem plates :  persvc01_q ueue_delay _status  persvc12_ calls_ana lysis_half_hou r The Tem plate Launcher is now set up to generat e a report. You r scree ...

  • Cisco Systems ICM Software Version 4.5 - page 56

    56 Creating a Report 3.4. Launchi ng the Report To launch t he report, click OK. An unti tled repo rt window appea rs: À To design the report: 1. Click on the M aximize but ton in the u pper right co rner of the report w indow. The repor t window is maxim ized. You m ay also want to m aximize the Mon itor I CR window. 2. Drag the g raph, chart, an ...

  • Cisco Systems ICM Software Version 4.5 - page 57

    Launching the Repor t 57 3. Creating a Report The follow ing exam ple shows th e items in t he report resized and reposition ed. You may choose to use a dif ferent layout : 3. Click ins ide the t itle box and ent er a title for the rep ort (for exam ple, “Call Analy sis for B ellev ue, Denver, and Om aha Mid Tier Services”). R esize the Title w ...

  • Cisco Systems ICM Software Version 4.5 - page 58

    58 Creating a Report Your report sh ould appear simila r to th e following example: 3.4.1. What the Report Shows The repor t you creat ed contains a r eal-tim e bar graph tha t shows the averag e delay in queu e, expected d elay in queu e, length of the longes t call in queu e, and th e average sp eed of an swer for eac h service. I n this example, ...

  • Cisco Systems ICM Software Version 4.5 - page 59

    Saving the Report 59 3. Creating a Report 3.4.2. The Status Bar If yo u cl ic k on a bar in the grap h, a mes sa ge ap pears in the sta tus bar at the bottom of the Mon itor I CR window. The status ba r describes what the bar represents and its cur rent num erical v alue. For example: You can use t his featu re to get a precise r eading of a v alue ...

  • Cisco Systems ICM Software Version 4.5 - page 60

    60 Creating a Report À To save the repor t definition: 1. Choose File → Save, or c lick the Sav e button. The Sav e Report Definition dia log box appea rs. Since you crea ted a repor t on periphera l service s, the Save Report Definition d ialog box default s to the persvc d irectory . The “persvc” directo ry is res erved for s toring per ip ...

  • Cisco Systems ICM Software Version 4.5 - page 61

    Setting T hresholds 61 3. Creating a Report 3.8. Opening the Report You can open the TUTOR.CMB report by selecting the Open com mand from the F ile menu or by clicking the Open button. À To open the TUTOR.CMB r eport: 1. In the Moni tor ICR window, choose Fi le → Open, or c lick the Ope n button. The S elect Report Defin ition dialog box appears ...

  • Cisco Systems ICM Software Version 4.5 - page 62

    62 Creating a Report 2. Choose Thresh olds. The m ouse poin ter changes to a cross hai r ( + ). (Alternate ly, you can cho ose the Thresholds op tion from the Edit menu.) 3. Click anywhere ins ide the re al- tim e graph. The Thresho ld Edito r dialog box appe ars: You can set thr esholds fo r the four a ttribut es display ed in the Queue Del ay St ...

  • Cisco Systems ICM Software Version 4.5 - page 63

    Setting T hresholds 63 3. Creating a Report The thres holds you just set w ill have the fo llowing ef fects, poss ibly imm ediately, depend ing on the v alues in the g raph:  When the Av erage De lay in Queu e is greater than or equa l to 15 seconds, th e Avg . Delay bar in the real- time g raph will turn y ellow, indicating a first- level w arn ...

  • Cisco Systems ICM Software Version 4.5 - page 64

    64 Creating a Report half-h our inte rval. You a lso set the S ervice Lev el thresho lds to <= to 80 percent for the y ellow warni ng and <= 75 percen t for the red warning . If the Se rvice Lev el equals or falls be low 80 perc ent, the S ervice Lev el column in t he chart w ill turn yellow to indica te that th e Service L evel approache d a ...

  • Cisco Systems ICM Software Version 4.5 - page 65

    Adding Drill- Downs 65 3. Creating a Report 3. Click anyw here ins ide the “Pe riph era l Service s Queue D elay Statu s” report w indow. The DrillDown E ditor appe ars. In this ex ample, th e DrillDown Edito r lists the correspondi ng real- time tem plates f or Routes: Monitor I CR has rules th at specify the g roups of drill- down template s ...

  • Cisco Systems ICM Software Version 4.5 - page 66

    66 Creating a Report Now that you hav e added drill- down capabili ty to the re al-tim e graph, you can do the s ame with th e historica l grid. À To add drill-downs to the historical grid comp onent: 1. Click on Nex t. The DrillDown Ed itor changes to reflect t he route template s that can be added to the hist orical g rid. 2. Click the “routes ...

  • Cisco Systems ICM Software Version 4.5 - page 67

    Saving Your W orkspace 67 3. Creating a Report 2. Double-click on a bar for another pe ripher al servic e to speci fy that you want data fo r that pe ripheral serv ice. A new “Rou tes Status” drill- down report appe ars. 3. To close a drill- down report, mak e the window activ e and choose File → Close. For the h istorical po rtion of the r e ...

  • Cisco Systems ICM Software Version 4.5 - page 68

    68 Creating a Report For exam ple, say tha t the first thing you want to see at the sta rt of the workday is a real-tim e report on call queue delays for a certain g roup of peripheral services. Y ou can eas ily set up Monito r ICR to display th is report at startup. Note: Only sav ed report defini tions (.CMB fi les) can be disp layed at s tartup. ...

  • Cisco Systems ICM Software Version 4.5 - page 69

    69 4. Reporting Basics 4. Reporting Basics This chap ter descr ibes the basics of creat ing report s with the Moni tor ICR tool. I t provides detai ls on using the t oolbar, menu com mands, on-li ne help, and the Template Lau ncher. Sever al comm on reporting tasks a re covered in this chap ter, inclu ding:  Starting Monitor ICR.  Working wit ...

  • Cisco Systems ICM Software Version 4.5 - page 70

    70 Reporting Basics 4.1. The G EO T EL A dmin Workstation Group From the W indows NT desktop, op en the G EO T EL Admin Wo rkstatio n group. The g roup contains sev eral applica tions: The follow ing applica tions are used in repo rting on and m onitoring cal l cen ter ac tivit y:  Job Scheduler . Let s you schedule re ports to be g enerated and ...

  • Cisco Systems ICM Software Version 4.5 - page 71

    Starti ng M oni tor ICR 71 4. Reporting Basics 4.2. Starting Monitor IC R To start Monitor I CR, double-click the Monito r ICR icon in the G EO T EL Admin Work station group. The Monitor I CR main window appe ars: See also: For info rmation on st arting Mon itor I CR from the com mand prom pt, see “Comm and Prompt Startup Opt ions,” later in th ...

  • Cisco Systems ICM Software Version 4.5 - page 72

    72 Reporting Basics 4.2.1. Toolbar Options You can use the bu ttons on th e Monitor I CR toolbar t o quickly activate the most com m on functions. Table 6 summ arizes these bu ttons. Table 6: Monitor ICR T oolbar Button Action Create a new report. Open a report th at you have previously saved. Save the current report to a file. Print the current re ...

  • Cisco Systems ICM Software Version 4.5 - page 73

    Starti ng M oni tor ICR 73 4. Reporting Basics Monitor I CR provides a pop- up menu that a llows you to d isplay the toolbar in several di fferent way s. Click the right m ouse button in th e area to the right o f the toolbar . A menu appea rs: Toggle the Frame Bar op tion to hide th e toolbar. To redisplay the toolbar, choo se Options → To olbar ...

  • Cisco Systems ICM Software Version 4.5 - page 74

    74 Reporting Basics À Invoke on-line h elp by using one of these methods:  In the Moni tor ICR window, click the Help b utton.  Select Help from the Help m enu.  Press F1. The Help con tents window is shown in the following example: Each Help sy stem on th e Admin Work station wo rks in th e same way . If you click the Master He lp button ...

  • Cisco Systems ICM Software Version 4.5 - page 75

    Worki ng w ith th e Templ ate Lau nch er 75 4. Reporting Basics To change th e refresh rate, chang e the v alue in the Re fresh Ra te field in the Prefere nces dialog box. This fi eld also a ffects th e rate at which real- time data is updated in Monitor I CR real-tim e reports. See also: See “Setting Workstation Pr eference s,” later in this c ...

  • Cisco Systems ICM Software Version 4.5 - page 76

    76 Reporting Basics À To invoke the template launcher: In the Moni tor ICR window, click the New button. The Temp late Launcher window app ears: In the Tem plate Launche r window, you choose the option s that def ine how a report wi ll be gener ated. These op tions inc lude:  Category and Scope  Date and Tim e  Ite ms  Temp lates After ...

  • Cisco Systems ICM Software Version 4.5 - page 77

    Worki ng w ith th e Templ ate Lau nch er 77 4. Reporting Basics 4.3.1. Category and Scope Choose a rep ort Category . You can select o nly one cat egory on which to base the report. You can create reports on the follow ing logica l groups, or c ategories, within th e cal l center en terprise :  Agent: An agent is anyone who can answer in coming ...

  • Cisco Systems ICM Software Version 4.5 - page 78

    78 Reporting Basics  Routing C lient . You can report o n statis tics for the differen t routing clients de fined in th e ICR system . A routing client is an enti ty that sends rou ting reques ts to the I CR. Routing clients ty pically correspond to a subsy stem with in the inte rexchange c arrier (I XC) o r to a periphe ral (ACD or PBX) that is ...

  • Cisco Systems ICM Software Version 4.5 - page 79

    Worki ng w ith th e Templ ate Lau nch er 79 4. Reporting Basics The Scope opt ions inclu de:  Base On ly . This option is av ailable only if you sel ect Skill G roup as the Categ ory. Base ski ll groups a re used to org anize relat ed subgroups o n some types of ACDs. F or exam ple, you m ight have skill g roups call ed HelpDesk .pri and HelpD e ...

  • Cisco Systems ICM Software Version 4.5 - page 80

    80 Reporting Basics A business entity m ay represen t a div ision with in a large c orporation or a single customer wit hin a serv ice bureau. By default, th e ICR enterpris e consists of only one busi ness entity . If you enable partitioni ng, you can def ine mul tipl e busin ess en tities . If you hav e only one entry under Select Business Ent it ...

  • Cisco Systems ICM Software Version 4.5 - page 81

    Worki ng w ith th e Templ ate Lau nch er 81 4. Reporting Basics If you selec t Absolute Dat es , click the down arrow in the F rom and To boxes to d isplay a ca lendar: Double-click on a day in t he calendar to select i t. You can also cl ick on the left an d right ar rows in the c alendar to display diff erent m onths. To enter times, high light t ...

  • Cisco Systems ICM Software Version 4.5 - page 82

    82 Reporting Basics The Relative opt ions include:  Today . Provides da ta for the current day and the t ime period entered. ( The 00:00 to 23:59 defau lts provide da ta from midnigh t of the cur rent day up to the curren t time.)  Yeste rday . P rovides data fo r the p revious day and the tim e period entered. ( The 00:00 to 23:59 defau lts ...

  • Cisco Systems ICM Software Version 4.5 - page 83

    Worki ng w ith th e Templ ate Lau nch er 83 4. Reporting Basics A dvant ages of Using Relative Dates The Relativ e Dates option prov ides a uniqu e advantag e over entering specific d ates and t imes. When y ou use rela tive date s, you do not hav e to edit the re port defi nition to c hange the r eport date s and m ake them current. Ev ery tim e y ...

  • Cisco Systems ICM Software Version 4.5 - page 84

    84 Reporting Basics defined in t he ICR sy stem. You can scro ll down in the list to view additional i tem s. You have sev eral op tions for s electing item s from this list:  To selec t a single it em, click on it.  To selec t more item s, press th e C TRL key and click on th e items.  To selec t a range of items, click on the fi rst item ...

  • Cisco Systems ICM Software Version 4.5 - page 85

    Worki ng w ith th e Templ ate Lau nch er 85 4. Reporting Basics The tem plate lists prov ide the fo llowing inform ation about ea ch temp late:  Templ ate name . The nam e of the tem plate. Ea ch tem plate uses a naming convention that includes a directory ( for example, pe rsvc, routes, trk grp), a num ber, and a br ief descript ive titl e. Thi ...

  • Cisco Systems ICM Software Version 4.5 - page 86

    86 Reporting Basics 4.4. Wor k i ng w ith Reports When a repor t first appea rs on th e screen, it is untitl ed. To keep the report, y ou need to save i t as a repo rt definit ion file. This sec tion describ es several common task s you perform when working with reports :  Saving repor t definitions  Working with multipl e-com ponent reports ...

  • Cisco Systems ICM Software Version 4.5 - page 87

    Worki ng w ith R epor ts 87 4. Reporting Basics If you hav e already sav ed the file, y ou can choose F ile → Save As to save the repo rt definition t o a new file w ith a new nam e. The File → Save As option also d isplays th e Save Report De finition di alog box. Note: Saved repo rts do not sh ow up in the Tem plate Launcher list of template ...

  • Cisco Systems ICM Software Version 4.5 - page 88

    88 Reporting Basics  Any thresho lds you have def ined.  Any drill- downs y ou have defined.  The nam es of the tem plates u sed in the r eport. Th e tem plates themselv es are not sav ed in the report. Howev er, refe rences to t he template s are sav ed. Any subsequ ent modif ications to the tem plates used by the report are r eflected in ...

  • Cisco Systems ICM Software Version 4.5 - page 89

    Worki ng w ith R epor ts 89 4. Reporting Basics You mig ht want to create a more com plex report that uses m ore than one template. For exam ple, if y ou launch two r eal-tim e temp lates and a historica l template, the repor t contains three com ponents. You sav e the report d efinition in th e same way you sav e a single-com ponent report definit ...

  • Cisco Systems ICM Software Version 4.5 - page 90

    90 Reporting Basics See also: For more in formatio n on work ing with more tha n one rep ort on the screen, see “ Work ing with Sev eral Repo rts,” la ter in this chapter. Multiple- com ponent reports c an be useful in d isplay ing differen t types of data in a single repo rt. Note, howev er, that ea ch componen t can display only one ty pe of ...

  • Cisco Systems ICM Software Version 4.5 - page 91

    Worki ng w ith R epor ts 91 4. Reporting Basics À To lay out and r esize report co mponents: 1. Select Ed it → Shu ffle Mode. 2. Drag the g raph, chart, and text objec ts and resize them. (Som etimes a grid sty le report is too l ong to displ ay all the data it cont ains. In this case, y ou can use the scroll ba r on the rig ht side of t he grid ...

  • Cisco Systems ICM Software Version 4.5 - page 92

    92 Reporting Basics 4.4.4. Working with Sev eral Reports Often, you will have m ore than one repo rt display ed on the sc reen. You can mov e between reports by click ing on a window to m ake it activ e. The follow ing exam ple shows a Monitor ICR screen with t hree repor ts display ed (one of th e reports, fou rcmp.cm b, is a m ultiple- component ...

  • Cisco Systems ICM Software Version 4.5 - page 93

    Worki ng w ith R epor ts 93 4. Reporting Basics  Layer . Stacks a ll windows within M onitor I CR on top of each othe r.  Cascade . Arrang es all wind ows within Monitor I CR so that th ey overlap, but each is st il l part ia lly visib le.  1, 2, 3... . Lets y ou quickly change to a d ifferent repo rt window. The other o ptions of the Wind ...

  • Cisco Systems ICM Software Version 4.5 - page 94

    94 Reporting Basics You mig ht also want to paus e screen refr eshing whil e you are work ing with the D efini tion Editor, the Thr eshold Ed itor, or th e DrillD own Editor. This e nsures tha t the func tion you are w orking with (fo r example, th e Defin ition Edito r) is not interrup ted by the real-tim e refreshing of the scr een. To pause th e ...

  • Cisco Systems ICM Software Version 4.5 - page 95

    Printer Set up 95 4. Reporting Basics À To specify the r eport printer: 1. Choose File → Printer Setup. The Printe r Setup dia log box appea rs. 2. Click on a p rinter to us e for repor ts and perf orm one of th e following steps:  Click on O K to sav e the printer setting s and close th e Printer Setup dialog box.  Click the Setup butto n ...

  • Cisco Systems ICM Software Version 4.5 - page 96

    96 Reporting Basics 4.7. Pr i nting Reports You can print r eports th at are disp layed on the Monitor I CR screen. First, d isplay the repo rt and m ake it the a ctive (cu rrent) window. Then choose File → P rint from the Mon itor I CR menu or cl ick the P rint butt on in the toolb ar. The repor t is sent to the printe r. A dialog box appears to ...

  • Cisco Systems ICM Software Version 4.5 - page 97

    File Association 97 4. Reporting Basics À To open a report: 1. In the Moni tor ICR window, choose Fi le → Open, or c lick the Ope n button. The S elect Report Defin ition dialog box appears. Only report de finition files app ear in the S elect Report De finition dialog box. You do n ot see the templates, a lthough they are also stored in t hese ...

  • Cisco Systems ICM Software Version 4.5 - page 98

    98 Reporting Basics À To apply file as sociation through NT Ex plorer: 1. Start the W indows NT Explo rer program . 2. Change to the I CR’s custom directory . 3. Open one of the c ustom subdirectories (for exam ple, persv c), and select (h ighlig ht) a .CMB repo rt defini tion. 4. Press S HIFT and click th e right m ouse button. A pop- up menu ...

  • Cisco Systems ICM Software Version 4.5 - page 99

    Modifying Report Definit ions 99 4. Reporting Basics Note: Before you exit from Monitor ICR, m ake sure that Option s → Save S ettings on E xit is de sele cte d . Otherwis e, the settings y ou have saved wi ll be ov erwritten by the setting s in place when y ou exit. To test the settings, c hoose File → E xit to end the current M onitor I CR se ...

  • Cisco Systems ICM Software Version 4.5 - page 100

    100 Reporting Basics À To modify a report de finition : 1. With a repo rt display ed, choose Edi t → Definitio n. The Defini tion Editor ap pears. 2. Make the changes you wan t, such as choo sing differe nt Item s (services, skill g roups, etc.), o r entering differen t dates and times. Note: You cannot mak e changes to the Ca tegory and Sco pe ...

  • Cisco Systems ICM Software Version 4.5 - page 101

    Exporting Report Data 101 4. Reporting Basics À To delete a repor t definit ion: 1. Invoke the DOS Com mand Prom pt from the W indows NT Program Manager. 2. Change to the d irectory that contains the report definition. Fo r example: cd icr custom er awcust ompersvc 3. Locate the f ile you want to de lete. Repor t files hav e the suffix .CMB. ...

  • Cisco Systems ICM Software Version 4.5 - page 102

    102 Reporting Basics 6. Enter a file nam e. (You do not hav e to enter an extension .) By default, th e file is st ored in a cu stom subdi rectory based on the ty pe of report f rom which you are exporting data (for exam ple, persv c, trkg rp, etc.). 7. Click OK to sav e the data. Table 8: File Format Options Format Descri ption CSV Comma-separated ...

  • Cisco Systems ICM Software Version 4.5 - page 103

    Setting Workstation Preferences 103 4. Reporting Basics À To change work station pre ferences: 1. Choose Options → P references. The Preferenc es dialog box appe ars: 2. Change the w orkstat ion prefe rences using the follow ing g uidelines: Note: T hese g uidelines v ary based on the type of A W.  ICR Dire ctory . Shows the d rive and di rec ...

  • Cisco Systems ICM Software Version 4.5 - page 104

    104 Reporting Basics 20 * 15 = 3 00 seco nds (or f ive minutes ) In the prev ious exam ple, Monitor I CR would display an Event Feed Warn ing dialog box if it did no t receive rea l-tim e data for five m inutes. (See “Ev ent Feed Warn ing,” late r in this section for instru ctions on wha t to do if the Ev ent Feed Warning dialog box appears.) ? ...

  • Cisco Systems ICM Software Version 4.5 - page 105

    User Inform ation 105 4. Reporting Basics 4.14.1. Event Feed Warning The Event Fee d Warning dialog box app ears if th ere is a problem with data conn ectivity to either the Centra l Contro ller or t he real- tim e distributor Adm in Work station. Rath er than allowi ng Monitor I CR to continue runn ing, in wh ich case rep orts may display ina ccur ...

  • Cisco Systems ICM Software Version 4.5 - page 106

    106 Reporting Basics The User I nformation di alog box prov ides inform ation fo r the IC R central databa se and the Adm in Work station local d atabase, i ncluding:  Central database serv er name . The n ame of the se rver on which the ICR Database Server (Log ger) and d atabase m anager reside (f or example, G EO ABC LGRA). On some AWs, th is ...

  • Cisco Systems ICM Software Version 4.5 - page 107

    107 5. Setting Thresholds 5. Setting Thresholds and Drill-Downs You can set up reports to a lert you when certain valu es exceed or fall below expected levels. The Th reshold Editor al lows you to set thresho lds on one or m ore data a ttributes in a report. For exam ple, within a report you m ight set a threshol d value of 70 p ercent on the Servi ...

  • Cisco Systems ICM Software Version 4.5 - page 108

    108 Setting Thresholds and Drill-Downs 5.1. Setti ng Thr esholds in Reports The Thresho ld Edito r lets you set threshold alerts on certain data in a report. A threshold ale rt might not ify you of ca ll centers whe re the delay in queue is ap proaching an unacceptab le level o r where all agents are currently busy. When a th reshold is re ached or ...

  • Cisco Systems ICM Software Version 4.5 - page 109

    Setting Thresholds in Reports 109 5. Setting Thresholds  Relati on . Th is option toggles to the >= or <= re lations by clicking on the down- arrows. These relat ions specify how t he data attr ibute will be evaluat ed again st the th reshold valu es. In the Thres hold Editor screen exam ple, >= specifi es tha t if the daily count o f C ...

  • Cisco Systems ICM Software Version 4.5 - page 110

    110 Setting Thresholds and Drill-Downs 5.1.2. Saving Threshold Settings You must sav e the repo rt in order f or the thr eshold set tings to be saved in the repor t defini tion. I f you close the report with out sav ing it, the thresho ld setting s will be l ost. À To save the thresh old set tings: Choose File → Save in th e Monitor I CR window ...

  • Cisco Systems ICM Software Version 4.5 - page 111

    Using Drill- Downs in Report s 111 5. Setting Thresholds Table 9: Drill-Down Hi erarchy Type of Report (or report component) Drill-Downs available Base-only skill gro up s P e r ipheral skill group templates Enterprise service Peripheral ser vices te m plate s Enterprise skill group Peripheral skill group templates Peripheral ser vice Routes te mpl ...

  • Cisco Systems ICM Software Version 4.5 - page 112

    112 Setting Thresholds and Drill-Downs The DrillDown E ditor dialog box lists the d rill- down templates avai lable for the repo rt com ponent. Monito r ICR has rule s that spe cify which drill- down tem plate s can be added to report com ponents. Refer to Table 9, ea rlier in this s ection, for a li st of the d rill-dow n rules. The DrillDown E di ...

  • Cisco Systems ICM Software Version 4.5 - page 113

    Using Drill- Downs in Report s 113 5. Setting Thresholds Moving Between Report Components You can assig n drill-downs to o ther com ponents in th e same repor t by using the Next and Prev ious buttons w ithin the D rillDown Editor : To assig n a drill- down to another c omponent i n the repor t, click the Nex t button. The D rillDown Editor d ialog ...

  • Cisco Systems ICM Software Version 4.5 - page 114

    114 Setting Thresholds and Drill-Downs À To invoke drill-do wns: With the r eport disp layed, perfo rm one of the following steps, dependi ng on the ty pe of report com ponent:  In a graph or c hart repo rt com ponent, double- click on a data attribut e for a specific ent ity. I n the following example, y ou could double-cli ck on any of th e b ...

  • Cisco Systems ICM Software Version 4.5 - page 115

    Using Drill- Downs in Report s 115 5. Setting Thresholds Choose File → Close to c lose the act ive drill- down window. Optionally , you can save the drill- down window as a separ ate repor t. 5.2.5. Saving Drill-Downs as S eparate Reports Drill- down report windows c an be saved just like r eports gene rated through th e template launche r. The d ...

  • Cisco Systems ICM Software Version 4.5 - page 116

    116 Setting Thresholds and Drill-Downs ...

  • Cisco Systems ICM Software Version 4.5 - page 117

    117 6. Scheduling Reports 6. Scheduling Reports As you build a collection of Monito r ICR reports , you mig ht decide that you’d lik e to have ce rtain repo rts printed automati cally. The Admin Worksta tion has a Job Sch eduler too l that allows y ou to schedu le Monitor I CR reports to print autom atically on a regular basis, reg ardless of whe ...

  • Cisco Systems ICM Software Version 4.5 - page 118

    118 Scheduling Reports 6.1. I CR Job Schedul er As a superviso r, your m ost comm on use of the I CR Job Scheduler will be to print reports a t specific dates and times. For exam ple, say that you created a r eport tha t uses a relat ive date to display data. B ecause y ou used a rela tive da te (for ex ample, Today or Yesterday), the report always ...

  • Cisco Systems ICM Software Version 4.5 - page 119

    ICR Job Scheduler 119 6. Scheduling Reports 3. Click on a p rinter to use for re ports. 4. Optionally , you can click on t he Setup but ton to display a Docum ent Properties dialog box an d choose a fo rm ty pe to be used, the p aper orientat ion, and num ber of copies. (Cl ick the Help but ton in the Document Prope rties dialog box to find o ut mo ...

  • Cisco Systems ICM Software Version 4.5 - page 120

    120 Scheduling Reports The init ial window dis plays sev eral fiel ds of data :  Frequency . Spec ifies th e frequency with which the job will be executed. P ossible en tries includ e Every , Next, Today , Tomorrow. These opt ions are des cribed later in this s ection.  Day . Specifies the day or day s of the week on which the job wi ll run. ...

  • Cisco Systems ICM Software Version 4.5 - page 121

    ICR Job Scheduler 121 6. Scheduling Reports À To set up the prin t job d etails: 1. In the I CR Job Scheduler window, click the New bu tton. The J ob Details dia log box appea rs. 2. Enter inform ation i n this window us ing the fo llowing guidelines :  Time . Enter the time tha t you want the job to p rint. Highl ight the hours and the m inute ...

  • Cisco Systems ICM Software Version 4.5 - page 122

    122 Scheduling Reports You must ente r the dire ctory nam e and the f ile nam e for each repo rt. Also, for m ultiple en tries, be s ure to include spaces b etween e ach directo ryfilename com binatio n.  Log . The Log check box is disable d for the Pr intRpt comm and. All print jobs submit log entr ies to the I CRPRI NT.LOG file. The pr int jo ...

  • Cisco Systems ICM Software Version 4.5 - page 123

    ICR Job Scheduler 123 6. Scheduling Reports À To change a schedu led job: 1. In the I CR Job Scheduler window, select a job from the list of scheduled jobs. 2. Click the Chang e button. The Job Details dia log box appears. 3. Change the fields as desc ribed in “S cheduling Reports to Pri nt,” earlier in th is chap te r. 4. When you a re satisf ...

  • Cisco Systems ICM Software Version 4.5 - page 124

    124 Scheduling Reports À To inspect a log file: 1. In the I CR Job Scheduler window, click the Inspect L og button. A Select Log dia log box appears: 2. Select the ICR PRINT.LOG file from the list o f log fil es and click on OK. A standard Wind ows NT Notepad w indow appears to d isplay the log file. The follow ing example shows a sample I CRPRINT ...

  • Cisco Systems ICM Software Version 4.5 - page 125

    125 7. Available Data 7. Available Data The I ntellig ent Call Rou ter databases collect h istoric al and rea l-tim e data about ag ent activity and the cal ls being rou ted in the c all center enterpris e. Within Monito r ICR , you can display data for ag ents, skill groups, serv ices, trunk groups, route s, and periphera ls. You can also display ...

  • Cisco Systems ICM Software Version 4.5 - page 126

    126 Available Data 7.1. Ski ll Gr oup Data The I CR tracks inform ation abou t the skil l groups at each periph eral. A skill group is a co llection of ag ents who shar e a comm on set of sk ills and therefo re can handl e similar types of ca lls. A periphe ral skil l group is a sk ill group th at is asso ciated w ith a spec ific per ipheral (AC D) ...

  • Cisco Systems ICM Software Version 4.5 - page 127

    Skill Group Data 127 7. Available Data  Agents rese rved . The num ber of agent s current ly in the re served state. A reserved ag ent is aw aiting an interflowe d call and is unavaila ble to rec eive any in coming calls. Thi s state app lies to agents on No rthern Tel ecom Mer idian and Aspe ct CallC enter ACDs only.  Agents in busy other . ...

  • Cisco Systems ICM Software Version 4.5 - page 128

    128 Available Data 7.2. Ag ent Data With G EO T EL • Agent Report ing enabled , the I CR track s data for th e agents wi thin the ca ll center enterpr ise. An agent is anyone who can answer inco ming phone call s. In a m ore precise way , a periph eral agen t is an ag ent who is asso ciated with a p articula r peripheral (ACD, PBX) in the call ce ...

  • Cisco Systems ICM Software Version 4.5 - page 129

    Agent Data 129 7. Available Data 7.2.2. A gent Status The I CR tracks agent statu s by positi on, skill g roup, and by ag ent name. Specifical ly, the I CR records the following data on ag ent status in ICR real- time and half- hour tables :  Pos itio n . The cu rrent extens ion on which th e agent is wo rking .  Agent na me . The f irst and ...

  • Cisco Systems ICM Software Version 4.5 - page 130

    130 Available Data  Incoming calls total . The total num ber of inb ound ACD calls handled by the agent du ring the in terv al. This v alue is in cremented when the af ter- call work ass ociated w ith the cal l is comp leted.  Incoming calls a vg. length . The averag e length in s econds for incoming calls handled by the ag ent during th e in ...

  • Cisco Systems ICM Software Version 4.5 - page 131

    Agent Data 131 7. Available Data  Abandoned calls hold . The total num ber of ACD calls th at were abandoned while being held a t an agent’ s position. The value i s increm ented at the time the cal l disconnec ts.  Abandoned calls aver age . The av erage ring tim e in seco nds associated w ith ACD calls tha t were abandoned while ringing a ...

  • Cisco Systems ICM Software Version 4.5 - page 132

    132 Available Data  Assistanc e calls percent . The perc entage of t ime that th e agent spent during the interv al on su pervisor- assisted calls. This value is measured ag ainst the total time th e agent wa s logged on du ring the interv al.  Conferen ce calls in . The number of incom ing calls on which the agent was in con ference. I ncomi ...

  • Cisco Systems ICM Software Version 4.5 - page 133

    Agent States and Time Allocations 133 7. Available Data The follow ing ICR databa se tables sto re agent st ate and tim e allocat ion data:  Agent_Skill_Group_Real_Time . Sto res real- time data on the current state of each ag ent in a skill group . For exam ple, the AgentStat e field prov ides the cur rent state o f the agent : Logged Off, Logg ...

  • Cisco Systems ICM Software Version 4.5 - page 134

    134 Available Data 7.3.1. ICR A gent State Terminology The I CR tracks the fol lowing agent states. Tables 11-13, late r in this chapter, m aps the I CR agent sta te term s to the te rms used by the peripheral vendors.  Logged on . The num ber of agen ts who are log ged on (that i s, agents who are known to th e system , but may or may not be re ...

  • Cisco Systems ICM Software Version 4.5 - page 135

    Agent States and Time Allocations 135 7. Available Data The I CR track s the number of ag ents in eac h state a long with the time agents sp end in spec ific states. Ta ble 10 shows how ag ent activi ty and time spen t in parti cular state s are tra cked by the I CR. Table 10: A gent Stat es and T ime A ll ocat i ons Log On State Read y State Agent ...

  • Cisco Systems ICM Software Version 4.5 - page 136

    136 Available Data The I CR also tracks the total am ount of time agents in a skil l group spend in sp ecific sta tes. For each specific st ate, tim e is record ed to track how long ag ents are in the p articul ar state. I n addition, tim e spent in certain stat es is tra ck ed m ore generally in time alloca tion categ ories such as Ta lk Tim e an ...

  • Cisco Systems ICM Software Version 4.5 - page 137

    Agent States and Time Allocations 137 7. Available Data 7.3.2. ICR Ag ent State Mapping To Peripherals The I CR uses certain term s to describ e the work st ates that agents m ove in and out of wh ile hand ling custom er calls. Peri pheral vendo rs use slightly different term s to describe the se sam e states. Table 11 show s the I CR agent state t ...

  • Cisco Systems ICM Software Version 4.5 - page 138

    138 Available Data G EO T EL ICR Aspect CallCenter Lucent DE FINIT Y ECS Nor tel Meridian Talking Other Talking Inside Superv isor Line MSG 1 HELP 1 AUX IN/OUT ACW IN/OUT DN IN DNOUT DNOHOLD DNIHOLD ACDH/DNO ACDH/DNI NRDY/DNO NRDY/DNI NRDY/DNOH NRDY/DNIH ACDH/DNOH 2 ACDH/DNIH 2 Work Ready Wrap-up ACW DACW Not Ready Work Not Ready N.A. N.A. N.A. Bus ...

  • Cisco Systems ICM Software Version 4.5 - page 139

    Agent States and Time Allocations 139 7. Available Data Table 12 show s the I CR agent state term s and how they correspond to the term s used by R ockwell and S iemens. Table 12 : Ag ent Stat e Terminology —Rockwell and Siemens G EO T EL ICR Rockwell Galaxy Rockwell Spectrum Siem ens HICOM 300E Siemens Ro lm 9751 CBX Logged O n Plugged N.A. Logg ...

  • Cisco Systems ICM Software Version 4.5 - page 140

    140 Available Data G EO T EL ICR Rockwell Galaxy Rockwell Spectrum Siem ens HICOM 300E Siemens Ro lm 9751 CBX Work Not Ready N. A. Call wor k and available console lamp not lit . N.A. Unavailable/Work Busy Oher Ov erflow calls currently i n progress . Overflow call wor k. Busy on either an internal call or a call for an agent grou p other than the ...

  • Cisco Systems ICM Software Version 4.5 - page 141

    Service Data 141 7. Available Data G EO T EL ICR Alcat el 4400 NEC N EAX 2400 Ericsson ACP100 Wo r k Ready Agent Wo rking After Call/Wrap - up Work Agent not ready Work Not Ready Agent Work Not Ready N.A. N.A. Busy Other N.A. Supported (n o NEC term) Other Res erve d N. A. Al ert in g N .A. Hold Busy All on hold N.A. 7.4. Service Data The I ntellig ...

  • Cisco Systems ICM Software Version 4.5 - page 142

    142 Available Data  Calls o ffered . The total num ber of cal ls offered to the serv ice during an inte rval. This i ncludes both incom ing and intern al calls.  Calls answer ed . The number of c alls to the servic e that were answered du ring an int erval. A cal l is count ed as answered when it reaches an ag ent or VRU.  Calls h andled . ...

  • Cisco Systems ICM Software Version 4.5 - page 143

    Service Data 143 7. Available Data As a simple example, i f you had 50 ca lls that were answered in un der 30 seconds and 80 calls tha t took long er than 30 seco nds to answer, the I CR would calc ulate the service l evel as follows: 50/(50+8 0) x 100 = Servic e Leve l % In this exam ple, the s ervice lev el would be 38 percent. ICR Service Level ...

  • Cisco Systems ICM Software Version 4.5 - page 144

    144 Available Data per iph eral servi ce l evel , is a p roprieta ry service level as calcula ted by the periphe ral. Som e peripherals sup port m ore than one ty pe of serv ice level c alculation. The metho d of servic e lev el calcula tion used by the peripheral is set by the System Manag er when the p eriphera l service is configured. See also: ...

  • Cisco Systems ICM Software Version 4.5 - page 145

    Enterp rise Da ta 145 7. Available Data 7.4.4. A gent Time A llocations The I CR track s several da ta categor ies rela ted to the time a periph eral service ’s agents spend handling ca lls. Th is data inc lude:  Handle ti me . The total seconds tha t agen ts for the serv ice were in the Talk ing I n, Work Ready, and Work Not Ready state s. ? ...

  • Cisco Systems ICM Software Version 4.5 - page 146

    146 Available Data 7.5.1. Enterprise Calcul ations The I CR can sim ply total some sta tistics to obtain en terpris e-wide values. Fo r example, to ob tain the number of ag ents avai lable for an enterpris e skill g roup, the I CR adds the number of agents available for each periphe ral skil l group tha t is a me mber of the en terpri se skill g ro ...

  • Cisco Systems ICM Software Version 4.5 - page 147

    Serv ice A rray Da ta 147 7. Available Data  Calls Abandoned . The num ber of calls to the trunk group that wer e abandoned du ring a cur rent or prev ious half- hour inte rval.  Calls in . The num ber of incom ing calls rec eived on the trunk g roup during a c urrent or previous ha lf-hour in terval.  Calls out . The number of outbound ca ...

  • Cisco Systems ICM Software Version 4.5 - page 148

    148 Available Data Service_Re al_Tim e and Service_Half_Hou r tab les. To arrive a t daily values, the I CR sum s the Service_H alf_Hour rows for e ach day. The I CR track s the sam e types of data for se rvice arr ays as it d oes for service s. For serv ice array s, the IC R tracks the f ollowing types of da ta:  Call counts  Service lev els ...

  • Cisco Systems ICM Software Version 4.5 - page 149

    Peripheral Data 149 7. Available Data 7.9.1. Service Lev el The I CR track s the servic e level fo r a route ba sed on the calcula tion method tha t is in use for the pe ripheral serv ice as sociated with the route. There are three ty pes of serv ice level c alculat ion methods, each of which treat abandoned calls d ifferen tly:  Abandoned calls ...

  • Cisco Systems ICM Software Version 4.5 - page 150

    150 Available Data 7.11. Application Gate way Data You can repo rt on sev eral ty pes of data r elated to applicat ion gatew ays. The G EO T EL • Gateway feature allow s the IC R to inter face to a ho st system that is runni ng another c all center ap plication. The ICR uses the applicati on gateway to q uery the hos t system and applica tion in ...

  • Cisco Systems ICM Software Version 4.5 - page 151

    Routing Client Data 151 7. Available Data 7.12. Call Ty pe Data The I CR allows to report sta tistic s for the c all types defined in th e system . A call type is a category of incom ing calls. Ca lls are ca tegoriz ed based on dial ed number (DN), ca ller-enter ed digits (CED), and call ing line I D (CLID). Each cal l type has a schedule th at det ...

  • Cisco Systems ICM Software Version 4.5 - page 152

    152 Available Data  Receive in err or . The num ber or routing requests from the rou ting client tha t produced e rrors d uring the five- minute inte rval.  Timeou t calls . The number of route resp onses to th e routing client that tim ed out during the fiv e-minute int erval.  Late calls . The num ber of route responses to the routing cl ...

  • Cisco Systems ICM Software Version 4.5 - page 153

    153 8. Template Reference 8. Template Reference The I CR com es with predefin ed tem plates that simpli fy the p rocess of generating reports. The predefined templa tes allow y ou to generate a variety of reports wi thout having to spend tim e developi ng queries or designing report fo rmats. Ea ch template d isplay s a specific set of real- time o ...

  • Cisco Systems ICM Software Version 4.5 - page 154

    154 Template Reference 8.1. Real-Time and Histo rical Templates The re al-tim e template s genera te report s that show the curr ent state of the call ce nter ente rprise. Real- time repor ts help you to keep track of current ca ll center resources and react qu ickly to any serv ice delay s. The re al-tim e template s draw data from the r eal-tim e ...

  • Cisco Systems ICM Software Version 4.5 - page 155

    Real-Tim e and Historical Templates 155 8. Template Reference agteam01_agent_status_by _position Description This template generates a real- tim e grid report th at shows the statu s of each agen t in an agen t team by position. Database Table Agent_R eal_Tim e Data Pos itio n . The cu rrent extens ion on which th e agent is wo rking . Agent na me ...

  • Cisco Systems ICM Software Version 4.5 - page 156

    156 Template Reference agteam02_agent_statu s_by _skillgroup Description This template generates a real- tim e grid report th at shows th e statu s of each agen t team m ember. The repo rt also show s which skill g roup the agent is currently logged on to. Database Table Agent_Sk ill_Group_Rea l_Time Data Agent team . The name of the agent team. Sk ...

  • Cisco Systems ICM Software Version 4.5 - page 157

    Real-Tim e and Historical Templates 157 8. Template Reference agteam03_logout_status_by_team Description This template generates a historica l grid repo rt that s hows agent login and logout hi story for on e or m ore selected agen t team s over a speci fied time per iod. Database Table Agent_Logout Data Agent enterp rise na me . The l ast nam e an ...

  • Cisco Systems ICM Software Version 4.5 - page 158

    158 Template Reference agteam04_daily_agent_activ it y Description This template generates a historica l grid repo rt that s hows daily agent call handl ing activ ity over a sp ecified tim e period. To arr ive at da ily values, the I CR sums the Agent_Sk ill_Group_Ha lf_Hour rows for e ach day. Database Table Agent_Sk ill_Group_Ha lf_Hour Data Agen ...

  • Cisco Systems ICM Software Version 4.5 - page 159

    Real-Tim e and Historical Templates 159 8. Template Reference Callback messa ge average len gth . The av erage leng th in seconds for callback m essages th at were proc essed by the agent during the interv al. Callback m essage percen t . The percen tage of al l calls han dled by the agent fo r the perio d that w ere callba ck m essages. % Wrapup . ...

  • Cisco Systems ICM Software Version 4.5 - page 160

    160 Template Reference agteam05_agent_daily_perf Description This template generates a histor ical grid repo rt of agent perfo rmance over a speci fied time peri od. To arrive at daily v alues, the ICR sum s the Agent_Sk ill_Group_Ha lf_Hour row s for each d ay. Database Table Agent_Sk ill_Group_Ha lf_Hour Data Agent team . The name of the agent te ...

  • Cisco Systems ICM Software Version 4.5 - page 161

    Real-Tim e and Historical Templates 161 8. Template Reference Hold calls out percent . The percentag e of hold t ime associa ted with outbound ca lls the agent placed on ho ld. This v alue is m easured against the tota l time the ag ent was l ogg ed on during the in terv al. Hold calls int erna l . The tota l number of complete d interna l calls t ...

  • Cisco Systems ICM Software Version 4.5 - page 162

    162 Template Reference Conference c alls out ave rage . The av erage tim e in secon ds that th e agent spe nt in confe rence on ag ent-init iated calls du ring the i nterval. This valu e inclu des hold tim e associ ated with t he conferen ce calls. Conference c alls out per cent . The percentag e of tim e that the ag ent spent during the half- hour ...

  • Cisco Systems ICM Software Version 4.5 - page 163

    Real-Tim e and Historical Templates 163 8. Template Reference agtper01_agent_status_by _position Description This template generates a real- tim e grid report th at shows agent stat us by position fo r each ag ent logg ed on to the periph eral. Database Table Agent_R eal_Tim e Data Peripheral . The name of the periphera l selected a s the scope o f ...

  • Cisco Systems ICM Software Version 4.5 - page 164

    164 Template Reference agtper02_agent_status_by _skillgroup Description This template generates a real- tim e grid report th at shows current s tatus of each ag ent by the sk ill group s defined fo r the per ipheral. Database Table Agent_Sk ill_Group_Rea l_Time Data Peripheral . The name of the periphera l selected a s the scope o f the report. Ski ...

  • Cisco Systems ICM Software Version 4.5 - page 165

    Real-Tim e and Historical Templates 165 8. Template Reference agtper03_logout_status_by_peripheral Description This template generates a histor ical grid repo rt tha t details ag ent log in duration and logout a ctivity ov er a specifi ed period o f time. Database Table Agent_Logout Data Peripheral . The name of the periphera l to which thes e agen ...

  • Cisco Systems ICM Software Version 4.5 - page 166

    166 Template Reference agtper04_daily_agent_activ it y Description This template generates a histor ical grid repo rt tha t details t he call handling act ivity of ag ents fo r a periph eral over a specified t ime period. To arriv e at daily values, the ICR sum s the Agent_Sk ill_Group_Ha lf_Hour row s for each d ay. Database Table Agent_Sk ill_Gro ...

  • Cisco Systems ICM Software Version 4.5 - page 167

    Real-Tim e and Historical Templates 167 8. Template Reference Callback messa ge average len gth . The av erage leng th in seconds for callback m essages th at were proc essed by the agent during the interv al. Callback m essage percen t . The percen tage of al l calls han dled by the agent fo r the perio d that w ere callba ck m essages. % Wrapup . ...

  • Cisco Systems ICM Software Version 4.5 - page 168

    168 Template Reference agtper05_agent_daily_perf Description This template generates a historica l grid repo rt that s hows agent perform ance by periphera l over a specified t ime period. To arrive at daily v alues, the ICR sum s the Agent_Skil l_Group_Half_Hour rows for each day . Database Table Agent_Sk ill_Group_Ha lf_Hour Data Peripheral . The ...

  • Cisco Systems ICM Software Version 4.5 - page 169

    Real-Tim e and Historical Templates 169 8. Template Reference Hold calls int erna l . The tota l number of complete d interna l calls t he agent placed on hold for the interv al. The value is increm ented wh en the after- call wo rk asso ciated with the ca ll is com pleted. Hold calls internal average . The averag e on hold tim e associated w ith i ...

  • Cisco Systems ICM Software Version 4.5 - page 170

    170 Template Reference Conference c alls out ave rage . The av erage tim e in secon ds that th e agent spe nt in confe rence on ag ent-init iated calls du ring the i nterval. This valu e inclu des hold tim e associ ated with t he conferen ce calls. Conference c alls out per cent . The percentag e of tim e that the ag ent spent during the half- hour ...

  • Cisco Systems ICM Software Version 4.5 - page 171

    Real-Tim e and Historical Templates 171 8. Template Reference agtskg01_agent_status_by _position Description This template generates a real- tim e grid report th at shows agent stat us in selected sk ill groups by positio n. Database Table Agent_R eal_Tim e Data Skill group . The name of the skill g roup to which th e agents be long. Pos itio n . T ...

  • Cisco Systems ICM Software Version 4.5 - page 172

    172 Template Reference agtskg02_agent_status_by _skillgroup Description This template generates a real- tim e grid report th at deta ils the cur rent status of e ach agen t in a skill g roup. Database Table Agent_Sk ill_Group_Rea l_Time Data Skill group . The name of the skill g roup to which th e agents be long. Agent na me . The f irst and las t ...

  • Cisco Systems ICM Software Version 4.5 - page 173

    Real-Tim e and Historical Templates 173 8. Template Reference agtskg03_logout_status_by_skillg roup Description This template generates a histor ical grid report tha t detail s logon and logout s tatus for the individua l agents in a particu lar skil l group. Database Table Agent_Logout Data Skill group . The name of the skill g roup to which th es ...

  • Cisco Systems ICM Software Version 4.5 - page 174

    174 Template Reference agtskg04_daily_agent_activ it y Description This template generates a historica l grid repo rt that s hows agent call handling act ivity ov er a spec ified tim e period for one or more sk ill groups. To arr ive at daily values, the I CR sums the Agent_Sk ill_Group_Ha lf_Hour row s for each d ay. Database Table Agent_Sk ill_Gr ...

  • Cisco Systems ICM Software Version 4.5 - page 175

    Real-Tim e and Historical Templates 175 8. Template Reference Callback messa ge average len gth . The av erage leng th in seconds for callback m essages th at were proc essed by the agent during the interv al. Callback m essage percen t . The percen tage of al l calls han dled by the agent fo r the perio d that w ere callba ck m essages. % Wrapup . ...

  • Cisco Systems ICM Software Version 4.5 - page 176

    176 Template Reference agtskg05_agent_daily_perf Description This template generates a historica l grid repo rt that s hows agent perform ance over a spe cified tim e period. To arrive at d aily v alues, the ICR sums the Ag ent_Skill_Group_Ha lf_Hour rows fo r each day. Database Table Agent_Sk ill_Group_Ha lf_Hour Data Skill group . The name of the ...

  • Cisco Systems ICM Software Version 4.5 - page 177

    Real-Tim e and Historical Templates 177 8. Template Reference Hold calls int erna l . The tota l number of complete d interna l calls t he agent placed on hold for the interv al. The value is increm ented wh en the after- call wo rk asso ciated with the ca ll is com pleted. Hold calls internal average . The averag e on hold tim e associated w ith i ...

  • Cisco Systems ICM Software Version 4.5 - page 178

    178 Template Reference Conference c alls out ave rage . The av erage tim e in secon ds that th e agent spe nt in confe rence on ag ent-init iated calls du ring the i nterval. This valu e inclu des hold tim e associ ated with t he conferen ce calls. Conference c alls out per cent . The percent age of tim e that the ag ent spent during the half- hour ...

  • Cisco Systems ICM Software Version 4.5 - page 179

    Real-Tim e and Historical Templates 179 8. Template Reference apgate11_status_by _hal f_hour Description This template generates a historica l, tabular repor t that shows the number of r equests made through an application g ateway to a ho st system for particu lar half- hour interv als. Data is a lso provided on rejected r equests, m aximum and av ...

  • Cisco Systems ICM Software Version 4.5 - page 180

    180 Template Reference caltyp01_status_grid Description This template generates a real- tim e grid that show s data on ca ll types in the ICR sy stem. Data shown in cludes the m aster scr ipt in effec t for the call type an d the num ber of ca lls routed for the ca ll type. Database Table Call_ Type_Re al_Tim e Data Call type . The name of the call ...

  • Cisco Systems ICM Software Version 4.5 - page 181

    Real-Tim e and Historical Templates 181 8. Template Reference caltyp02_count_graph Description This template generates a real- tim e, stacked bar gra ph that k eeps a running tota l of ca ll routin g statis tics for cal l types fo r the cu rrent day (since m idnight). Database Table Call_ Type_Re al_Tim e Data Call Types Def ault Routed (Today) . T ...

  • Cisco Systems ICM Software Version 4.5 - page 182

    182 Template Reference entskg01_status_#_graph Description This template generates a real- tim e, stacked bar gra ph that show s the number of ac tive agent s from selected en terprise sk ill grou ps who are currently in any of fou r agent sta tes. Database Table Skill_Gro up_Real_ Time Data Agents availabl e . The number of agents who are in the A ...

  • Cisco Systems ICM Software Version 4.5 - page 183

    Real-Tim e and Historical Templates 183 8. Template Reference entskg02_status_grid Description This template generates a real- tim e grid that show s the number o f agents from sele cted ente rprise skill groups who are signed on, how t hese agents b reak down numerica lly into nine states, and how they bre ak down on a percent age basis into five ...

  • Cisco Systems ICM Software Version 4.5 - page 184

    184 Template Reference Therefore, whi le active in on e skill g roup, the ag ent is consid ered by the other sk ill groups to be in th e Busy Othe r state. Percent agen ts idle . The percentag e of all ag ents in the enterprise sk ill group who are in the Not Ready state. Percent agen ts availab le . The percentag e of all ag ents in th e enterpr i ...

  • Cisco Systems ICM Software Version 4.5 - page 185

    Real-Tim e and Historical Templates 185 8. Template Reference entskg03_status_% _graph Description This template generates a real- tim e graph that show s the perc entage of agents from selecte d enterpr ise skill g roups who are in any of four call handling sta tes. Database Table Skill_Gro up_Real_ Time Data Agents availabl e . The percen tage of ...

  • Cisco Systems ICM Software Version 4.5 - page 186

    186 Template Reference entskg04_status_grid_to5 Description This template generates a rolling five -minute g rid that show s the full- time equiv alent (FTE) values f or agents in the en terprise sk ill g roup. FTE is the num ber of ful l-tim e agents that would be required du ring a period to pe rform the work done in that period. To ca lculate th ...

  • Cisco Systems ICM Software Version 4.5 - page 187

    Real-Tim e and Historical Templates 187 8. Template Reference FTE rese rve . The F TE value for the tim e agents are in t he Reserv ed state. Th e Reserved s tate is a sta te in which the agent i s awaiting an interflow ed call and is unav ailable to receiv e any incom ing calls. This state a pplies to agents on Nor thern Telecom Meridian and Aspec ...

  • Cisco Systems ICM Software Version 4.5 - page 188

    188 Template Reference entskg05_utilization_graph Description This template generates a real- tim e bar graph that s hows a per centage utilizat ion of agen ts in th e selecte d enterpr ise skill g roups. Perc entage utilizat ion is the ratio betw een the time ag ents spend hand ling call s and the time agents we re ready to accept ca lls. Database ...

  • Cisco Systems ICM Software Version 4.5 - page 189

    Real-Tim e and Historical Templates 189 8. Template Reference entskg06_halfhour_aht_gri d Description This template generates a historica l grid tha t shows ca ll count an d handle tim e data per h alf-hour for selected enterprise sk ill group s. This template also incl udes a summ ary row for eac h day of data, which provides daily averag es and t ...

  • Cisco Systems ICM Software Version 4.5 - page 190

    190 Template Reference FTE number o f agents . The FTE number o f logg ed on agents for the enterpris e skill g roup. FTE (fu ll-tim e equivalent ) is the num ber of full- time agents tha t would be requ ired during a period to pe rform the work done in that per iod. To calculat e the FTE, div ide the number of se conds of work perform ed by the nu ...

  • Cisco Systems ICM Software Version 4.5 - page 191

    Real-Tim e and Historical Templates 191 8. Template Reference entskg07_daily_aht_grid Description This template generates a histor ical grid tha t disp lays call count and handle tim e data on a p er-day basis for sel ected ente rprise sk ill groups. This template also inc ludes a summ ary row that totals or averag es the data fo r all skill g roup ...

  • Cisco Systems ICM Software Version 4.5 - page 192

    192 Template Reference FTE number o f agents . The FTE value fo r the num ber of logg ed on agents fo r the ente rprise sk ill group. F TE (ful l-tim e equivalent ) is the number o f full- time ag ents that would be required du ring a period to pe rform the work done in th at period. To ca lculate the FTE, divide the n umber of s econds of work per ...

  • Cisco Systems ICM Software Version 4.5 - page 193

    Real-Tim e and Historical Templates 193 8. Template Reference entskg08_halfhour_per fo rm_gri d Description This tem plate g enerates a hi storica l grid that sh ows half- hour, full- time equivale nt (FTE) v alues for agents in selected en terprise skill g roups. FTE is the num ber of ful l-tim e agents that would be required du ring a period to p ...

  • Cisco Systems ICM Software Version 4.5 - page 194

    194 Template Reference FTE wr ap-up . The FTE number of ag ents involved in a fter-call wo rk. FTE busy other . The FTE nu mber of ag ents in the Busy Other sta te (that is, bu sy in sk ill groups other than the one pre sently being examined). An agent can be active in o nly one ski ll group at a time. Therefore, whi le active in on e skill g roup, ...

  • Cisco Systems ICM Software Version 4.5 - page 195

    Real-Tim e and Historical Templates 195 8. Template Reference entskg09_normalized_agt_state Description Thi s te mplat e gen erat es a st ac ked ba r gra ph tha t sh ows th e per centa ge of time tha t all ag ents in the en terpris e skill g roup were in sp ecific s tates during an interval. The norm alized v alue is der ived from the total t ime t ...

  • Cisco Systems ICM Software Version 4.5 - page 196

    196 Template Reference entsvc01_queue_delay_status Description This template generates a real- tim e bar graph that d isplay s data on th e current st atus of ca ll queue s for sele cted ente rprise se rvices. Database Table Service_Re al_Tim e Data Average delay in qu eue . The av erage delay for ca lls currently in queu e for the enterp rise serv ...

  • Cisco Systems ICM Software Version 4.5 - page 197

    Real-Tim e and Historical Templates 197 8. Template Reference entsvc02_calls_status Description This template generates a real- tim e, stacked bar g raph that displays the number of ca lls on which agents are talking and the num ber of calls in queue for se lected ent erprise s ervices. Database Table Service_Re al_Tim e Data Calls ta lk ing . The ...

  • Cisco Systems ICM Software Version 4.5 - page 198

    198 Template Reference entsvc03_effect_of_aban_on_servicelev el Description This template generates a real- tim e grid that show s the eff ect of abandoned c alls on the se rvice lev els of sel ected ente rprise serv ices. This g rid also p rovides a sum mary row that tota ls or av erages the data for all pe ripher al servic es listed. Database Tab ...

  • Cisco Systems ICM Software Version 4.5 - page 199

    Real-Tim e and Historical Templates 199 8. Template Reference entsvc04_calls_trend_analy sis Description This template generates a real- tim e grid that show s call cou nts and service levels fo r enterpr ise serv ices since the end of the l ast f ive-m inute interval, for the cur rent half- hour inte rval, and s ince m idnight. This g rid also pro ...

  • Cisco Systems ICM Software Version 4.5 - page 200

    200 Template Reference entsvc05_calls_offered_half_pie Description This template generates a real- tim e pie chart tha t shows the di stribut ion of calls of fered to s elected en terprise services for the cur rent hal f-hour interval. The Calls O ffered val ue (for exam ple 18.01 %) is a percen tage of the to tal cal ls offered to the ent erprise ...

  • Cisco Systems ICM Software Version 4.5 - page 201

    Real-Tim e and Historical Templates 201 8. Template Reference entsvc06_serv_lev el_monitor_graph Description This template generates a real- tim e bar graph that s hows serv ice lev els for selec ted enterpr ise serv ices since the end of th e last fiv e-m inute interval, for the cur rent half- hour inte rval, and s ince m idnight. Database Table S ...

  • Cisco Systems ICM Software Version 4.5 - page 202

    202 Template Reference entsvc07_no w _to5_grid Description This tem plate g enerates a g rid that p rovides cal l counts, qu eue status, and serv ice level d ata in real- tim e and for the last fiv e minute s for selected en terprise services. A summ ary row tota ls the v alues in e ach column for all the en terpr ise serv ices listed. Database Tab ...

  • Cisco Systems ICM Software Version 4.5 - page 203

    Real-Tim e and Historical Templates 203 8. Template Reference Service level . The percen tage of inc oming calls to the en terp rise serv ice that were answe red within a sp ecified thre shold. (Shown s ince the end of the last fiv e-m inute interv al, for the c urren t half-hour in terv al, and since m idnight.) Example ...

  • Cisco Systems ICM Software Version 4.5 - page 204

    204 Template Reference entsvc08_gate_realtime_ status_grid Description This tem plate g enerates a g rid repo rt that p rovides re al-tim e, half-hour, and daily status in form ation for an en terprise service. I n this repo rt, an enterpris e service is conside red to be a co llection of gates. A gate is the Rock well Galaxy term for a peripher al ...

  • Cisco Systems ICM Software Version 4.5 - page 205

    Real-Tim e and Historical Templates 205 8. Template Reference Calls Hand led – Half-Hour and Today (Nch ) . The tot al num ber of calls handl ed to com pletion by an ent erprise s ervice’s agents. Calls Abandoned – Half-Hou r and Today (Nca ) . The num ber of calls in which the c aller hung up be fore being connected with an agen t. % Abandon ...

  • Cisco Systems ICM Software Version 4.5 - page 206

    206 Template Reference entsvc09_svc_array _now_to5_grid Description This tem plate g enerates a g rid that p rovides cal l counts, qu eue status, and serv ice level d ata in real- tim e and for the last fiv e minute s for selected serv ice ar ray s. A summ ary row totals the valu es in each colum n for all th e serv ice array s listed . Database Ta ...

  • Cisco Systems ICM Software Version 4.5 - page 207

    Real-Tim e and Historical Templates 207 8. Template Reference Service level . The percen tage of inc oming calls to the servic e array th at were answered wi thin a specif ied thresho ld. (Shown since the en d of the last f ive-m inute interv al, for th e curre nt half- hour interv al, and since m idnight.) Example ...

  • Cisco Systems ICM Software Version 4.5 - page 208

    208 Template Reference entsvc11_calls_analy sis_day w ise Description This template generates a historica l grid tha t provides da ily tot als on calls and se rvice levels fo r the se lected en terprise services. This g rid also provides a service summary row that av erages and totals t he data fo r the individu al enterp rise serv ices in th e gri ...

  • Cisco Systems ICM Software Version 4.5 - page 209

    Real-Tim e and Historical Templates 209 8. Template Reference entsvc12_calls_analysis_half_hour Description This tem plate g enerates a hi storical g rid that p rovides half- hour call counts, tim e in seconds fo r ASA, AHT, and averag e delay in queu e, and service levels fo r select ed enterpr ise serv ices. This gr id also prov ides a service su ...

  • Cisco Systems ICM Software Version 4.5 - page 210

    210 Template Reference Calls abandoned . The number o f calls du ring the ha lf-hour in terval in which the cal ler hung up befor e being connecte d with an ag ent. (Also prov ided as a pe rcentag e of the to tal call s offered to the enterpris e service du ring the ha lf-hour interval. ) Example ...

  • Cisco Systems ICM Software Version 4.5 - page 211

    Real-Tim e and Historical Templates 211 8. Template Reference entsvc13_calls_offered_day w ise_graph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls offe red per day for sele cted ente rprise se rvices. Database Table Service_Half _Hour Data Calls o ffered . The total num ber of incom ing ...

  • Cisco Systems ICM Software Version 4.5 - page 212

    212 Template Reference entsvc14_calls_handled_day wise_graph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls handle d per day for selec ted enterp rise serv ices. Database Table Service_Half _Hour Data Calls h andled . The total num ber of calls h andled to comple tion for a ll agents in ...

  • Cisco Systems ICM Software Version 4.5 - page 213

    Real-Tim e and Historical Templates 213 8. Template Reference entsvc15_calls_abandoned_da y w ise_graph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls abandon ed per day for sele cted enter prise serv ices. Database Table Service_Half _Hour Data Calls abandoned . The number o f calls for ...

  • Cisco Systems ICM Software Version 4.5 - page 214

    214 Template Reference entsvc16_calls_h istor y _day w ise_graph Description This tem plate g enerates a hi storical l ine graph that shows the dai ly history of c alls for a sin gle selecte d enterp rise serv ice. This template is meant to be used with a single e nterpris e service o nly. Database Table Service_Half _Hour Data Calls abandoned . Th ...

  • Cisco Systems ICM Software Version 4.5 - page 215

    Real-Tim e and Historical Templates 215 8. Template Reference entsvc17_calls_offered_half_hour Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the half-hour d istribution o f calls o ffered fo r selec ted enterp rise serv ices. Database Table Service_Half _Hour Data Calls o ffered . The total num ber of incom ...

  • Cisco Systems ICM Software Version 4.5 - page 216

    216 Template Reference entsvc18_gate_half_hourly_status_grid Description This tem plate g enerates a g rid report that prov ides half- hour sta tus inform ation for an en terprise serv ice. In this re port, an ent erprise s ervic e is consider ed to be a co llection o f gates. A gate is the Rockwell Galaxy term for a peripher al serv ice. Database ...

  • Cisco Systems ICM Software Version 4.5 - page 217

    Real-Tim e and Historical Templates 217 8. Template Reference Average Seconds for Abandoned Calls (ASB) . The averag e seconds o f delay tim e for all calls to the enterp rise service that were a bandoned in queue du ring the ha lf-hour in terval. Primary Position Manned ( PPM) . The num ber of agents for the enterpris e service w ho were log ged o ...

  • Cisco Systems ICM Software Version 4.5 - page 218

    218 Template Reference nettrk01_status_grid Description This template generates a real- tim e grid that show s the sta tus of trunk s in selecte d network trunk g roups. Database Table Network_Trunk _Group_Real_Tim e Data Calls In Now . The num ber of inbound ca lls in prog ress on the network trunk g roup (in real- time). Calls Ou t No w . The num ...

  • Cisco Systems ICM Software Version 4.5 - page 219

    Real-Tim e and Historical Templates 219 8. Template Reference nettrk02_grid_last_half_hour Description This template generates a real- tim e grid that show s the sta tus of trunks in sele cted network trunk groups for th e current h alf- hour interval. Database Table Network_Trunk _Group_Real_Tim e Data All Trunks Busy . Th e total t ime that all t ...

  • Cisco Systems ICM Software Version 4.5 - page 220

    220 Template Reference nettrk12_grid_hal f_hour Description This tem plate g enerates a hi storical g rid that sh ows half-hour da ta on th e status of trunks in se lected ne twork trunk groups. Database Table Network_Trunk_Group_H alf_Hour Data All Trunks Busy . Th e total t ime that all trunk s in the ne twork tr unk group were b usy for the half ...

  • Cisco Systems ICM Software Version 4.5 - page 221

    Real-Tim e and Historical Templates 221 8. Template Reference peragt01_agent_status_by _position Description This template generates a real- tim e grid report th at shows the statu s of selected ag ents by positi on. Database Table Agent_R eal_tim e Data Pos itio n . The cu rrent extens ion on which th e agent is wo rking . Agent na me . The f irst ...

  • Cisco Systems ICM Software Version 4.5 - page 222

    222 Template Reference peragt02_agent_status_by _skillgroup Description This template generates a real- tim e grid report th at deta ils the cur rent status of s elected ag ents. Database Table Agent_Sk ill_Group_Rea l_Time Data Agent na me . The f irst and las t name of the ag ent. Skill group . The name of the I CR sk ill group to w hich the ag e ...

  • Cisco Systems ICM Software Version 4.5 - page 223

    Real-Tim e and Historical Templates 223 8. Template Reference peragt03_logout_status_b y _agent Description This tem plate g enerates a hi storical g rid report that shows lo gon and logout stat us on an agent- by-ag ent basis. Database Table Agent_Logout Data Agent na me. The firs t and las t name of the ag ent. Agent enterp rise na me . The l ast ...

  • Cisco Systems ICM Software Version 4.5 - page 224

    224 Template Reference peragt04_daily_agent_activ it y Description This template generates a histor ical grid tha t shows th e daily activi ty of selected ag ents over a specified time period . To arriv e at daily values, the IC R sums the Ag ent_Skill_Gr oup_Half_Hou r rows for e ach day. Database Table Agent_Sk ill_Group_Ha lf_Hour Data Agent na ...

  • Cisco Systems ICM Software Version 4.5 - page 225

    Real-Tim e and Historical Templates 225 8. Template Reference Callback m essage percen t . The percen tage of al l calls han dled by the agent fo r the perio d that w ere callba ck m essages. % Wrapup . The perc entage of t ime that th e agent spent in wrap-up on all calls counted as handled du ring the inte rval. An ag ent perfo rming wrap-up is e ...

  • Cisco Systems ICM Software Version 4.5 - page 226

    226 Template Reference peragt05_agent_daily_perf Description This template generates a historica l grid repo rt of ind ividual ag ent perform ance over one or more day s. To arrive a t daily v alues, the I CR sums the A gent_Skil l_Group_Half_H our rows fo r each day . Database Table Agent_Sk ill_Group_Ha lf_Hour Data Agent na me . The f irst and l ...

  • Cisco Systems ICM Software Version 4.5 - page 227

    Real-Tim e and Historical Templates 227 8. Template Reference Hold calls int erna l . The tota l number of complete d interna l calls t he agent placed on hold for the interv al. The value is increm ented wh en the after- call wo rk asso ciated with the ca ll is com pleted. Hold calls internal average . The averag e on hold tim e associated w ith i ...

  • Cisco Systems ICM Software Version 4.5 - page 228

    228 Template Reference Conference c alls out ave rage . The aver age tim e in seconds t hat the agent spe nt in confe rence on ag ent-init iated calls du ring the i nterval. This valu e inclu des hold tim e associ ated with t he conferen ce calls. Conference c alls out per cent . The percentag e of tim e that the ag ent spent during the half- hour ...

  • Cisco Systems ICM Software Version 4.5 - page 229

    Real-Tim e and Historical Templates 229 8. Template Reference peragt06_daily_agent_detail Description This template generates a historic al grid tha t shows de tailed ag ent sta te and call det ail data for periphera l agents. Note: To genera te this rep ort, you need to have Ag ent State Trace enabled fo r agent. See the Inte llige nt C a l l Rout ...

  • Cisco Systems ICM Software Version 4.5 - page 230

    230 Template Reference periph01_peripheral_status_report Description This template generates a real- tim e grid that show s switc h status, cal l and agent status, and serv ice lev els. You can use this tem plate with any peripheral supported by the I CR. Database Table Peripher al_Real_ Time Data Status . The cur rent fai lure state of the periph ...

  • Cisco Systems ICM Software Version 4.5 - page 231

    Real-Tim e and Historical Templates 231 8. Template Reference periph02_galaxy _softw are_status Description This template generates a real- tim e grid that show s all trunk s busy, ca lls in progress, S WT TRMS, and DI Groups stat us. This tem plate is for use with Rockwell Galaxy ACDs only. Database Table Peripher al_Real_ Time Data ATB (A ll Trun ...

  • Cisco Systems ICM Software Version 4.5 - page 232

    232 Template Reference periph03_galaxy _hardware_status Description This template generates a real- tim e grid that show s processo r, data receiv e, control, a nd switch clock status. This tem plate i s for use wi th Rockwell Gala xy ACDs only. Database Table Peripher al_Real_ Time Data Processor A Fnct Statu s . Galaxy- specific data. Processor B ...

  • Cisco Systems ICM Software Version 4.5 - page 233

    Real-Tim e and Historical Templates 233 8. Template Reference perskg01_status_#_graph Description This template generates a real- tim e, stacked bar gra ph that show s the number of ac tive ag ents from the selecte d peripher al skill g roups who are curren tly in an y of four c all handling states. Database Table Skill_Gro up_Real_ Time Data Agent ...

  • Cisco Systems ICM Software Version 4.5 - page 234

    234 Template Reference perskg02_status_grid Description This template generates a real- tim e grid that show s the number o f agents from sele cted perip heral sk ill groups w ho are sig ned on (log ged on), how these agent s break down num erically into nine s tates, and how they break down on a percentag e basis in to five states. A t otal row at ...

  • Cisco Systems ICM Software Version 4.5 - page 235

    Real-Tim e and Historical Templates 235 8. Template Reference Agents rese rved . The num ber of agent s current ly in the re served sta te. A reserv ed agent is awa iting an inte rflowed ca ll and is unav ailable to receiv e any incom ing calls. This state a pplies to ag ents on Northern Te lecom Meri dian and Aspec t CallCenter ACDs only . Agents ...

  • Cisco Systems ICM Software Version 4.5 - page 236

    236 Template Reference perskg03_status_% _graph Description This template generates a real- tim e bar graph that s hows the p ercentag e of agents f rom selected peripheral sk ill groups who are in any of four call hand ling states. Database Table Skill_Gro up_Real_ Time Data Agents availabl e . The percen tage of all ag ents in the periphera l ski ...

  • Cisco Systems ICM Software Version 4.5 - page 237

    Real-Tim e and Historical Templates 237 8. Template Reference perskg04_status_grid_to5 Description This template generates a rolling fiv e-m inute grid that sh ows ful l-tim e equivale nt (F TE) valu es for agents in sel ected peri phera l sk ill groups. FTE is the num ber of ful l-tim e agents that would be required du ring a period to pe rform th ...

  • Cisco Systems ICM Software Version 4.5 - page 238

    238 Template Reference agent is awaiting an in terflowed cal l and is unav ailable to r eceive any incom ing calls. This state ap plies to agen ts on North ern Telecom Meridian and Aspec t CallCenter ACDs only. FTE busy other . The FTE num ber of ag ents who are in the Busy Other state (th at is, b usy in skil l groups oth er than th e one pres ent ...

  • Cisco Systems ICM Software Version 4.5 - page 239

    Real-Tim e and Historical Templates 239 8. Template Reference perskg05_utilization_graph Description This template generates a real- tim e bar graph that s hows a per centage utilizat ion of agen ts in th e selecte d periph eral sk ill groups. Pe rcentag e utilizat ion is the ratio betw een the time ag ents spend hand ling call s and the tim e agen ...

  • Cisco Systems ICM Software Version 4.5 - page 240

    240 Template Reference perskg06_halfhour _aht_g ri d Description This template generates a historica l grid tha t display s call counts and handle tim e data by th e half- hour for sele cted perip heral sk ill groups. This template also inc ludes a summ ary row for each day of d ata, whic h provides daily averag es and to tals; and a sum mary row f ...

  • Cisco Systems ICM Software Version 4.5 - page 241

    Real-Tim e and Historical Templates 241 8. Template Reference Example ...

  • Cisco Systems ICM Software Version 4.5 - page 242

    242 Template Reference perskg07_daily_aht_grid Description This template generates a historica l grid tha t display s call counts and handle tim e data on a p er-day basis for select ed peripher al skill g roups. This template also inc ludes a summ ary row that totals or averag es the data fo r all skill g roups l isted. Database Table Skill_Gro up ...

  • Cisco Systems ICM Software Version 4.5 - page 243

    Real-Tim e and Historical Templates 243 8. Template Reference Full-time equivalent (FTE) number of ag ents . Th e FTE numbe r of logg ed on agents for the periphe ral skil l group. This v alue i s the total tim e that ag ents were logg ed on during the inte rval divide d by the number o f seconds in the inte rval. This provides the num ber of full- ...

  • Cisco Systems ICM Software Version 4.5 - page 244

    244 Template Reference perskg08_halfhour _perform_grid Description This tem plate g enerates a hi storica l grid that sh ows half- hour, full- time equivale nt (F TE) valu es for agents in sel ected peri phera l sk ill groups. FTE is the num ber of ful l-tim e agents that would be required du ring a period to pe rform the work done in that period. ...

  • Cisco Systems ICM Software Version 4.5 - page 245

    Real-Tim e and Historical Templates 245 8. Template Reference FTE busy other . The FTE num ber of ag ents who are in the Busy Other state (th at is, b usy in skil l groups oth er than th e one pres ently bei ng examined). An agent can be active in o nly one ski ll group at a time. Therefore, whi le active in on e skill g roup, the ag ent is consid ...

  • Cisco Systems ICM Software Version 4.5 - page 246

    246 Template Reference perskg09_normalized_agt_state Description This tem plate g enerates a s tacked bar g raph th at shows the p ercentag e of the tim e that all agents in t he periphe ral skil l group were in spe cific states dur ing an inte rval. The normaliz ed value i s derived f rom the t otal time tha t all ag ents were logged on duri ng th ...

  • Cisco Systems ICM Software Version 4.5 - page 247

    Real-Tim e and Historical Templates 247 8. Template Reference perskg10_forecast_agents_status_grid Description This template generates a rea l-tim e grid that show s the actu al ag ents signed on v ersus those forecast ed. For the s chedule im port portion o f this repor t (scheduled and required agents), y ou need the opt ional G EO T EL • Sched ...

  • Cisco Systems ICM Software Version 4.5 - page 248

    248 Template Reference persvc01_queue_delay_status Description This template generates a real- tim e bar graph that s hows the c urrent status of c all queues for selec ted periphera l serv ices. Database Table Service_Re al_Tim e Data Average delay in qu eue . The av erage delay for ca lls currently in queu e for the p eriphera l service. Expected ...

  • Cisco Systems ICM Software Version 4.5 - page 249

    Real-Tim e and Historical Templates 249 8. Template Reference persvc02_calls_status Description This template generates a real- tim e, stacked bar g raph that displays the number of ca lls on which agents are talking and the num ber of calls in queue for se lected pe ripheral se rvices. Database Table Service_Re al_Tim e Data Calls ta lk ing . The ...

  • Cisco Systems ICM Software Version 4.5 - page 250

    250 Template Reference persvc03_effect_of_aban_on_service level Description This template generates a real- tim e grid that show s the eff ect of abandoned c alls on the se rvice lev els of sel ected peripher al serv ices. This g rid also p rovides a sum mary row that tota ls or av erages the data in each colum n for all s ervices l isted in the gr ...

  • Cisco Systems ICM Software Version 4.5 - page 251

    Real-Tim e and Historical Templates 251 8. Template Reference persvc04_calls_trend_analy sis Description This template generates a real- tim e grid that show s call cou nts and service levels fo r select ed peripher al servic es since t he end of the last five- minute in terval, fo r the curr ent half- hour interv al, and sin ce midnig ht. A summ a ...

  • Cisco Systems ICM Software Version 4.5 - page 252

    252 Template Reference persvc05_calls_offered_half_pie Description This template generates a real- tim e pie chart tha t shows the di stribut ion of calls of fered to s elected pe ripheral se rvices for the curren t half- hour interval. The call s offered v alue (for exam ple 34.09% ) is a per centage of the total calls off ered to th e peripher al ...

  • Cisco Systems ICM Software Version 4.5 - page 253

    Real-Tim e and Historical Templates 253 8. Template Reference persvc06_serv _level_monitor_graph Description This template generates a real- tim e bar graph that s hows serv ice lev els for selec ted periphe ral serv ices since the end of th e last fiv e-m inute interval, for the cur rent half- hour inte rval, and s ince m idnight. Database Table S ...

  • Cisco Systems ICM Software Version 4.5 - page 254

    254 Template Reference persvc07_no w _to5_grid Description This tem plate g enerates a g rid that p rovides cal l counts, qu eue status, and serv ice level d ata in real- tim e and since the end of th e last five- minute i nterv al for sel ected periphe ral serv ices. A sum mary row totals the values in each colum n for a ll the per ipheral serv ic ...

  • Cisco Systems ICM Software Version 4.5 - page 255

    Real-Tim e and Historical Templates 255 8. Template Reference Average talk time . The average tim e that ag ents for the periphe ral service spent talk ing on cal ls since th e end of the last fiv e-m inute interv al. Talk time inc ludes tim e spent in the Talk ing I n, Talking Out, and Talk ing Other state s. Service level . The percen tage of inc ...

  • Cisco Systems ICM Software Version 4.5 - page 256

    256 Template Reference persvc08_gate_realtime_status_g rid Description This tem plate g enerates a g rid repo rt that p rovides re al-tim e, half-hour, and daily status in form ation for gat es. A gate is the Ro ckwell Ga laxy term for a serv ice. Database Table Service_Re al_Tim e Data Calls Offe red – Re al-Time, Half-H our, Today (Nco) . The n ...

  • Cisco Systems ICM Software Version 4.5 - page 257

    Real-Tim e and Historical Templates 257 8. Template Reference Calls Abandoned – Half-Hour and Today (Nca) . The number and percentag e of calls in whi ch the cal ler hung up before being connected wit h an agent. Cumula tive Ser vice Leve l – Hal f-Hour and Today (C sl) . The percentag e of incom ing calls to the g ate during th e interv al tha ...

  • Cisco Systems ICM Software Version 4.5 - page 258

    258 Template Reference persvc09_forecast_aht_offe r_grid Description This template generates a grid repo rt that c ompares da ta on ac tual and forecasted calls of fered and av erage han dle tim es. For the schedu le import por tion of th is report (the fore casted valu es), you need the optional G EO T EL • Schedule Impo rt fe atur e. Database T ...

  • Cisco Systems ICM Software Version 4.5 - page 259

    Real-Tim e and Historical Templates 259 8. Template Reference persvc11_calls_analy sis_da y w ise Description This template generates a histor ical grid tha t shows da ily ca ll total s and service levels fo r select ed peripher al serv ices. Th is grid a lso provides service summary rows that t otal or av erage the da ta for th e individua l perip ...

  • Cisco Systems ICM Software Version 4.5 - page 260

    260 Template Reference Calls h andled . The number of c alls answered an d finished for the peripheral service f or the day. (Also prov ided as a pe rcentage o f the total cal ls offere d to the se rvice duri ng the half- hour inte rval.) Calls abandoned . The number o f calls t o the perip heral serv ice fo r the day in which the call er hung up b ...

  • Cisco Systems ICM Software Version 4.5 - page 261

    Real-Tim e and Historical Templates 261 8. Template Reference persvc12_calls_anal y sis_half_hour Description This tem plate g enerates a hi storical g rid that p rovides half- hour call counts, tim e in seconds fo r ASA, AHT, and averag e delay in queu e, and service levels fo r select ed peripher al servic es. This g rid also p rovides a service ...

  • Cisco Systems ICM Software Version 4.5 - page 262

    262 Template Reference Calls h andled . The number of c alls answered an d finished for the peripheral service du ring the ha lf-hour i nterval. (A lso prov ided as a percentag e of the tota l calls o ffered to the periphera l service during the interv al. ) Calls abandoned . The number o f calls du ring the ha lf-hour in terval in which the cal le ...

  • Cisco Systems ICM Software Version 4.5 - page 263

    Real-Tim e and Historical Templates 263 8. Template Reference persvc13_calls_offered_day w ise_g raph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls offe red per day for the sel ected per ipheral se rvices. Database Table Service_Half _Hour Data Calls o ffered . The total num ber of inco ...

  • Cisco Systems ICM Software Version 4.5 - page 264

    264 Template Reference persvc14_calls_handled_day w ise_graph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls handle d per day for the se lected peripher al servic es. Database Table Service_Half _Hour Data Calls h andled . The total num ber of calls h andled to comple tion for a ll agent ...

  • Cisco Systems ICM Software Version 4.5 - page 265

    Real-Tim e and Historical Templates 265 8. Template Reference persvc15_calls_abandoned_da y w ise_graph Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls abandon ed per day for the se lected pe ripher al servic es. Database Table Service_Half _Hour Data Calls abandoned . The number o f call ...

  • Cisco Systems ICM Software Version 4.5 - page 266

    266 Template Reference persvc16_calls_histo r y _day w ise_graph Description This tem plate g enerates a hi storical l ine graph that shows the his tory of calls for a sing le selected periphera l service . This t emplate is meant to be used with a single p eripheral se rvice on ly. Database Table Service_Half _Hour Data Calls abandoned . The numbe ...

  • Cisco Systems ICM Software Version 4.5 - page 267

    Real-Tim e and Historical Templates 267 8. Template Reference persvc17_calls_offered_half_hour Description This tem plate g enerates a hi storical, ov erlapped ba r graph tha t shows the number of ca lls offe red across selected p eripheral se rvices in h alf- hour samples. Database Table Service_Half _Hour Data Calls o ffered . The total num ber o ...

  • Cisco Systems ICM Software Version 4.5 - page 268

    268 Template Reference persvc18_gate_half_hourl y _status_grid Description This tem plate g enerates a g rid report that prov ides half- hour sta tus inform ation for an pe ripheral service. I n this rep ort, a per ipheral se rvice is consider ed to be a g ate. A gate is the R ockw ell Galaxy term for a service . Database Table Service_Half _Hour S ...

  • Cisco Systems ICM Software Version 4.5 - page 269

    Real-Tim e and Historical Templates 269 8. Template Reference Primary Position Manned ( PPM) . The num ber of agents for the service who were logg ed on to their pr imary assignment g ate during the interv al (also referred to as the ag ent’s prim ary posit ion). Occupancy (OCC ) . Total tim e, in secon ds, tha t agents fo r the serv ice were log ...

  • Cisco Systems ICM Software Version 4.5 - page 270

    270 Template Reference routes01_queue_delay_status Description This tem plate g enerates a re al- time bar g raph that shows da ta on the current st atus of ca ll queues fo r the sel ected routes. Database Table Route_Real_T ime Data Average delay in qu eue . The av erage delay for ca lls currently in queu e for the route. Longest call in queue . T ...

  • Cisco Systems ICM Software Version 4.5 - page 271

    Real-Tim e and Historical Templates 271 8. Template Reference routes02_calls_status Description This template generates a real- tim e bar graph that s hows the num ber of calls in pr ogress ver sus the num ber of cal ls in queue for the se lected routes. Database Table Route_Re al_Tim e Data Calls ta lk ing . The number of ca lls to th e route on w ...

  • Cisco Systems ICM Software Version 4.5 - page 272

    272 Template Reference routes03_effect_of_aban_on_servicelev el Description This template generates a real- tim e grid that show s the eff ect of abandoned cal ls on the se rvice lev els of select ed routes. A sum mary row totals or av erages th e data for all ro utes listed in the grid . Database Table Route_Real_T ime Data Calls o ffered . The to ...

  • Cisco Systems ICM Software Version 4.5 - page 273

    Real-Tim e and Historical Templates 273 8. Template Reference routes04_calls_ trend_anal y sis Description This template generates a real- tim e grid that show s call cou nts and service levels fo r routes s ince the end of the las t five- m inute interval, fo r the cur rent half- hour inte rval, and sin ce midnig ht. This g rid also provides a sum ...

  • Cisco Systems ICM Software Version 4.5 - page 274

    274 Template Reference routes05_calls_offered_half_pie Description This template generates a real- tim e pie chart tha t shows the di stribut ion of calls of fered to s elected ro utes for the curren t half- hour interv al. The calls off ered v alue (for ex ample 4.07 %) is a per centage of the to tal calls offered to the rou tes listed in the char ...

  • Cisco Systems ICM Software Version 4.5 - page 275

    Real-Tim e and Historical Templates 275 8. Template Reference routes06_serv _level_monitor_graph Description This template generates a real- tim e bar graph that s hows serv ice lev els for the sel ected rout es since t he end of the last fiv e- minute inte rval, for the cur rent half- hour inte rval, and sin ce midnig ht. Database Table Route_Re a ...

  • Cisco Systems ICM Software Version 4.5 - page 276

    276 Template Reference routes07_now_to5_grid Description This tem plate g enerates a g rid that p rovides cal l counts, qu eue status, and serv ice level d ata in real- tim e and for the last fiv e minute s for selected r outes. A sum mary row totals the v alues in each colum n for all the routes liste d. Database Table Route_Real_T ime Data Calls ...

  • Cisco Systems ICM Software Version 4.5 - page 277

    Real-Tim e and Historical Templates 277 8. Template Reference Average talk time . The average tim e that ag ents for this ro ute spent talking on calls handl ed on the rou te since the en d of the la st five- minute i nterv al. Talk time includ es tim e spent in the Talk ing I n, Talk ing Out, and Talking Other stat es. Service level . The percen t ...

  • Cisco Systems ICM Software Version 4.5 - page 278

    278 Template Reference routes11_calls_analy sis_day w ise Description This template generates a historica l grid tha t provides da ily tot als on service levels, queue s tatus, and c all counts fo r selecte d routes. A summ ary row total s or averag es the data for in dividual rout es. Database Table Route_Half_Hour Data Service level . The percen ...

  • Cisco Systems ICM Software Version 4.5 - page 279

    Real-Tim e and Historical Templates 279 8. Template Reference Calls h andled . The number of c alls answer ed and finished for the ro ute during th e current five-m inute inte rval. (A lso provided a s a percentag e of the tota l calls o ffered to the route du ring the half- hour interv al.) Calls abandoned . The number o f calls during the day in ...

  • Cisco Systems ICM Software Version 4.5 - page 280

    280 Template Reference routes12_calls_analysis_half_hour Description This tem plate g enerates a hi storical g rid that p rovides half- hour call counts, tim e in seconds fo r ASA, AHT, and averag e delay in queu e, and service levels fo r select ed routes. This grid al so provides a route summ ary row that av erages or totals th e data for ind ivi ...

  • Cisco Systems ICM Software Version 4.5 - page 281

    Real-Tim e and Historical Templates 281 8. Template Reference Calls h andled . The number of c alls answer ed and finished for th e route during th e half- hour interv al. (Also prov ided as a percentag e of the total cal ls offere d to the route d uring the h alf- hour interval. ) Calls abandoned . The number o f calls du ring the ha lf-hour in te ...

  • Cisco Systems ICM Software Version 4.5 - page 282

    282 Template Reference rtecli11_ status_by _five_minutes Description This template generates a historica l grid tha t shows da ta on routin g client req uests a nd responses during the cur rent fiv e minute inte rval. Database Table Routing_Clien t_Five_Minute Data Responses . The number of r oute respon ses to the routing cl ient during the fiv e- ...

  • Cisco Systems ICM Software Version 4.5 - page 283

    Real-Tim e and Historical Templates 283 8. Template Reference schimp01_name_time_numbers This template is used m ainly by G EO T EL suppor t engineers to test the data im port functio ns of th e Workforc e Managem ent I ntegration Syst em. The exact d ata that appear in this Monitor I CR report depend on the specific work force m anagem ent system ...

  • Cisco Systems ICM Software Version 4.5 - page 284

    284 Template Reference trkgrp01_alltrunkbusy _graph Description This template generates a real- tim e bar graph that s hows the num ber of seconds that all trunk s in the se lected t runk groups hav e been fully busy for the current half- hour inte rv al. Database Table Trunk_Group_Real_ Time Data All trunks busy . The total t ime that al l trunks ...

  • Cisco Systems ICM Software Version 4.5 - page 285

    Real-Tim e and Historical Templates 285 8. Template Reference trkgrp02_idle_inserv ice_status Description This template generates a real- tim e bar graph that s hows the num ber of trunks in se lected t runk groups th at are id le and the num ber of t runks that are in serv ice. Database Table Trunk_Group_Real_ Time Data Trunks idle . The num ber o ...

  • Cisco Systems ICM Software Version 4.5 - page 286

    286 Template Reference trkgrp03_trunkgroup_status_gri d Description This template generates a real- tim e grid that show s the sta tus of trunk s in selecte d trunk g roups. Database Table Trunk_Group_Real_ Time Data Trunks idle . The num ber of trunk s in the tru nk g roup that are non- busy, or idle. Trunks in servic e . The num ber of trunks i n ...

  • Cisco Systems ICM Software Version 4.5 - page 287

    Real-Tim e and Historical Templates 287 8. Template Reference trkgrp11_trunkgr oup_performance_grid Description This tem plate g enerates a hi storical g rid that sh ows half-hour t runk perform ance data for selected tr unk groups. Database Table Trunk_Group_Half_Hour Data Trunks idle . The num ber of trunk s in the tru nk g roup that were non-bus ...

  • Cisco Systems ICM Software Version 4.5 - page 288

    288 Template Reference ...

  • Cisco Systems ICM Software Version 4.5 - page 289

    289 Glossar y Glossary Abandoned call A call in which the call er hangs up be fore the ca ll is answered. C alls in which the cal ler hangs up almost im mediate ly do not have to be counted as abandoned. Wh en config uring each peripheral, y ou can speci fy the minim um length of an ab andoned ca ll. About box A dialog box tha t display s general i ...

  • Cisco Systems ICM Software Version 4.5 - page 290

    290 Glossary Agent Anyone who can answer incom ing phone calls. A perip her al ag ent is an agent who is as sociated with a part icular per ipheral (ACD, PBX) in the call cente r enterpr ise. A periphera l agent can be a mem ber of one or more sk ill groups. (Some periphe ral types limit each agent t o one skil l group assig nment.) Optional ly, yo ...

  • Cisco Systems ICM Software Version 4.5 - page 291

    Glossary 291 Glossar y By contrast, a call is no t counted a s handled until it is finished. Therefore, t he number o f answered ca lls and hand led calls dur ing an interval is not ne cessarily the sam e, but eventual ly each answ ered call i s counted in bo th categor ies. Application Bri dge Server (ABS) A G EO T EL softwar e module th at allows ...

  • Cisco Systems ICM Software Version 4.5 - page 292

    292 Glossary AW . See Admin Work station. Basic Ra te Inter face (BRI) One of two level s of ISDN serv ice. The BRI prov ides two bearer channels for voice and da ta and on e channel fo r signaling (comm only expressed as 2B+D). See a lso Prim ary Rate I nterface (PRI ). Boolean expression An expression that evaluates to TRUE or FALSE; for example ...

  • Cisco Systems ICM Software Version 4.5 - page 293

    Glossary 293 Glossar y call. Term ination call detail desc ribes how a ca ll was handl ed at a peripheral . See also Route Det ails and Term ination Call De tails. Call type A category of incoming calls. Calls ar e categor ized based on dia led number (DN), ca ller-enter ed digits (CED), and cal ling line I D (CLID). Each call ty pe has a sched ule ...

  • Cisco Systems ICM Software Version 4.5 - page 294

    294 Glossary Centra l Office (CO) The swi tching off ice of the l ocal te lephone com pany. Th e local cen tral office rec eives cal ls from within the l ocal area and either routes th em locally or passes them to an interexch ange carri er (IXC ). On the receiv ing end, the l ocal cent ral office r eceives ca lls that originat ed in other areas fr ...

  • Cisco Systems ICM Software Version 4.5 - page 295

    Glossary 295 Glossar y Connection The link betwee n two nodes in a script o r between a nod e and a rout ing target se t. Connections show the flow of contr ol betwe en objec ts in the script. Wi thin the Sc ript Editor, a connection is repres ented as a line segment. Control m enu A standard m enu that allows y ou to m anipulate a window or dialog ...

  • Cisco Systems ICM Software Version 4.5 - page 296

    296 Glossary Customer Routing Point (CR P) AT&T’s term inology for thi rd-party processor s that acce pt routing requests f rom the CC SS7 network . With in the I ntelligent Ca ll Router , the Network Interfac e Contro ller (NI C) acts as a CRP. Customer Support For warding Service (CSFS) The fa cility w ithin the I CR L ogger that receives e ...

  • Cisco Systems ICM Software Version 4.5 - page 297

    Glossary 297 Glossar y actually delete that Ag ent record; it mark s the agent a s dele ted. The record is actually deleted wh en the depende ncy is rem oved. Device Managem ent Protocol (DM P) The sessi on-lay er communicati ons protoco l used within th e Intell igent Call Router . Different ap plication l evel proto cols mig ht be running beneath ...

  • Cisco Systems ICM Software Version 4.5 - page 298

    298 Glossary Distributor . See Real- time dist ributor. DMP . See Device Manag ement Protoco l. DN . See Diale d Number. DNIS . See Diale d Num ber Id entificatio n Servic e. DNIS Overrid e label A routing label tha t is sent to the routing client along with a DN IS value. The rou ting cli ent passes that DNI S value w ith the ca ll to the d estin ...

  • Cisco Systems ICM Software Version 4.5 - page 299

    Glossary 299 Glossar y each locat ion. The I CR implements ent erprise- wide call d istribution and allows call s to be sent to any network -addressabl e location w ithin, o r outside of, a n enterpr ise. Entity . See Busi ness entity . Event M anagemen t Service (E MS) A software m odule with in the I ntelligen t Call Router that p rocesses us e t ...

  • Cisco Systems ICM Software Version 4.5 - page 300

    300 Glossary Gatew ay . See Applicat ion Gateway and I CR Gateway. Geographical reg ion . See Region. G EO T EL • Agent Reporting An optional I CR feature th at allows y ou to monitor real-tim e and historica l data abou t individua l agents, rather tha n groups of ag ents. G EO T EL • En terprise Agen t An optional I CR feature that p rovides ...

  • Cisco Systems ICM Software Version 4.5 - page 301

    Glossary 301 Glossar y G EO T EL • Web V iew An optional I CR feature th at allows you to u se a Web brows er for monitor- only access to real- time and his torical I CR reports and I CR script m onitoring. GMT . See Greenwich M ean Time. Greenwich Mean Time (G MT) The tim e zone at the m eridian at Gre enwich, England. Thi s time zone is used as ...

  • Cisco Systems ICM Software Version 4.5 - page 302

    302 Glossary HDS . See Historical Da ta Server. Historica l data Data collec ted at fiv e-m inute and half- hour interv als and sto red in the ICR central da tabase or an HDS database. Historica l Data Server (HDS) An Admin Work station with a special database th at holds I CR historical data. In a norm al conf iguration, h istorical d ata is st or ...

  • Cisco Systems ICM Software Version 4.5 - page 303

    Glossary 303 Glossar y Instance A single installa tion of the I CR. A n instance con sists of s everal components (Cal l Rou ter , Logge r, P eri phera l Ga tew ays, Admin Workstati ons), some of wh ich mig ht be duplexed. An instance can be dedicated t o a single cust omer or, in some environm ents, sha red among several cus tomers. Integrated Ser ...

  • Cisco Systems ICM Software Version 4.5 - page 304

    304 Glossary Job Scheduler A tool that a llows y ou to set up spe cific comm ands to be execu ted automati cally at g iven dates and t imes. You can sch edule a com mand to exe cut e onc e, on seve ral speci fic days, or re gul arly o n a w eekl y or monthly schedule. Key An entry in a da tabase ind ex. Each key in the index co rresponds t o a tabl ...

  • Cisco Systems ICM Software Version 4.5 - page 305

    Glossary 305 Glossar y Logged On A state in which ag ents have m ade their pre sence known to the system , but may or may not be re ady to rece ive calls. Logger The proces s within th e ICR that m anages the cent ral database. E ach side of a dupl exe d Cent ral Contro ller incl udes a Logge r. T he Lo gger may ru n on the sam e machine as the Cal ...

  • Cisco Systems ICM Software Version 4.5 - page 306

    306 Glossary Monitor mode A Script Edito r mode in whi ch the num ber of routing requests t hat pass through each c onnection o f a script is shown on the sc reen. You can us e this m ode to determ ine whether a script is be having as exp ected. NAA . See Next Available Agent. Name . See Enterp rise name. NCP . See Ne twork Control Po int. Network ...

  • Cisco Systems ICM Software Version 4.5 - page 307

    Glossary 307 Glossar y Node Manager A process that runs on each physica l node (com puter) in the IC R system and manag es other I CR processes on tha t system . The Node Manager i s responsi ble for in itializ ing node s and for r estarting failed p rocesses. The Node Manag er is guided by a config uration file that is stor ed on each node. The f ...

  • Cisco Systems ICM Software Version 4.5 - page 308

    308 Glossary Peripheral A switch, such as an ACD, PBX, or VRU, th at receiv es calls tha t have been routed by the ICR. Peri pheral Gat eway (PG) The com puter and proc ess within the IC R system that comm unicates directly with the ACD, PBX, or VRU a t the call cente r. The Periphera l Gateway rea ds status inf ormation from the per ipheral an d s ...

  • Cisco Systems ICM Software Version 4.5 - page 309

    Glossary 309 Glossar y PIM . See Peripher al Inter face Manag er. Post-qu ery lab e l A routing label tha t causes th e routin g client to re-enter its call routing plan at a spe cific point. Pos t- Routing  The G EO T EL routing concept that allow s the I CR to make seconda ry routing dec isions aft er a call has been in itially processed a t a ...

  • Cisco Systems ICM Software Version 4.5 - page 310

    310 Glossary Private net work A network m ade up of circu its for th e exclu sive use of o ne custom er. Private networks can b e nationwide in scope. They typic ally serve la rge co rpor ati ons o r gove rnmen t a genc ie s. Private network rout ing A configurat ion in which the ACD send s routing requ ests to th e ICR through the Pe ripheral Ga t ...

  • Cisco Systems ICM Software Version 4.5 - page 311

    Glossary 311 Glossar y Redundant Array of Inexpensive Disks (RAID) A storage dev ice that pr ovides fau lt-tole rance throug h redundant physical di sks. A RAID system is an a lternativ e to mirro red disks. Region A collection of prefix es for incom ing telephon e calls. I f the lead ing digits o f a calling line I D value m atch any of the p refi ...

  • Cisco Systems ICM Software Version 4.5 - page 312

    312 Glossary Route A value re turned by a rout ing script th at maps to a service and a speci fic target at a perip her al ; that is, a serv ice, sk ill group, agent, or tra nsl ation route. The I CR conv erts the rou te to a labe l that is re turned to the routing client. The routing client then d elivers t he call to a sp ecific trunk group with ...

  • Cisco Systems ICM Software Version 4.5 - page 313

    Glossary 313 Glossar y SCP . See Serv ice Contro l Point. Script A defined proce dure that the I CR can execute. The ICR supports two types of scripts: rou ting sc ripts to d eterm ine where to route a ca ll and administrative scr ip ts tha t perform backg round processing. A scri pt consists of executable nodes , connections, routing targets, and ...

  • Cisco Systems ICM Software Version 4.5 - page 314

    314 Glossary service level ca lculation s for a tim e period, the I CR considers only call s that had a se rvice lev el even t during tha t period. This ensu res that each call is coun ted only onc e and during the appropria te time per iod. Service leve l thresh old The num ber of seconds y ou set as th e maxim um tim e a caller shou ld wait befo ...

  • Cisco Systems ICM Software Version 4.5 - page 315

    Glossary 315 Glossar y SQL . See Structured Que ry Languag e. SQL Server The Microsof t ® relationa l database p roduct used for the I CR’s local and central da tabases. Status bar The set of fields that appe ar, by defau lt, at the bottom of an applicati on’s main window. Structured Query Languag e (SQL) A standard dat abase query language in ...

  • Cisco Systems ICM Software Version 4.5 - page 316

    316 Glossary Tie li ne A private trunk line th at connect s two ACDs or PBXs acros s a wide area. Toolbar The row of bu ttons that appe ars, by defa ult, at th e top of a tool ’s main window. You can execu te specif ic comm ands quickly by clicking a button on the toolbar. Translation rou te A target at a Periph eral Ga teway tha t does not m ap ...

  • Cisco Systems ICM Software Version 4.5 - page 317

    Glossary 317 Glossar y Variable A named objec t that can hol d a value. Virtual ca ll center An approach to ente rprise- wide call cen ter manag ement that treats several g eographic ally disperse d call cen ters as i f they were a single ca ll center. Th e virtual ca ll center expands sk ills-based rou ting f rom the ACD to the network level. S ee ...

  • Cisco Systems ICM Software Version 4.5 - page 318

    318 Glossary Names and v ersions of sc ripts tha t are curr ently open. Mode of each op en script. State, siz e, and position o f each script wi ndow or icon. Cur re nt us e of gr id s. State of the object pa lette, too lbar, and s tatus bar. The nex t time y ou start the Sc ript Ed itor, it restores the saved st ate. Wrap-up Call-rela ted work per ...

  • Cisco Systems ICM Software Version 4.5 - page 319

    319 Index Index —Symbols— .CMB files exte nsions, 86 .CSV. See C omma -separa ted value s data f ormat —Numbers— 1, 2, 3... option, 93 800 num ber( s) ICR rout ing of , 20 —A— Aba ndoned calls enterpris e serv ice, 198, 199, 2 02, 205, 208, 21 0, 213, 21 4, 216, 268 peripher al serv ice, 268 peripher a l ser v ic e , 250, 25 1, 25 4, 25 ...

  • Cisco Systems ICM Software Version 4.5 - page 320

    320 Index agtpe r01_agent_s tatus_by _posit ion, 163 agtpe r02_agent_s tatus_by _skillg roup, 164 agtpe r03_logout _status _by_pe riphera l, 165 agtpe r04_daily _agent_a ctivity, 166 agtpe r05_agent_ daily _perf, 168 agts kg01_age nt_status_by _position, 171 agtskg 02_age nt_status_by _skillg roup, 172 agtskg 03_logout_st atus_ by_sk illgroup, 173 ...

  • Cisco Systems ICM Software Version 4.5 - page 321

    Index 321 Index percent of time spe nt in enterprise skill g roup, 187 peripheral sk ill group, 238 time spent in, 136 peripher al serv ice, 256 Buttons (t oolba r), 72 —C— Call activity , 22 detail records, 40 flow , 20 internal, 21 routing script, 22 transfers, 21 Call ty pe, 31, 18 0 error coun t, 180 tem plates, 180, 18 1 Calling L ine ID ( ...

  • Cisco Systems ICM Software Version 4.5 - page 322

    322 Index —E— Enterprise peripher al serv ices re lationship, 25, 26 def ined, 23 Enterprise CTI, 19, 21 Enterprise service templates , 196–215 Enterprise skill g roup template s, 160–95 entskg 01_s ta tus _ #_g r ap h, 182 entskg 02_status_grid , 183 entskg 03_s ta tus _% _g ra p h, 18 5 entskg 04_status_g rid_to5, 186 entskg 05_utilizatio ...

  • Cisco Systems ICM Software Version 4.5 - page 323

    Index 323 Index enterprise skill g roup, 18 9, 191 peripher al serv ice, 268 peripher a l ser v ic e , 250, 25 4, 25 6, 260, 262, 26 4, 266 peripheral sk ill group, 240 , 242 route, 27 2, 27 6, 27 9, 28 1 service arra y, 206 Help bu t ton, 72 contents of, 74 invo king, 73 Hierarchy drill-dow n, 110 servic e and skill g roup, 24 Historical data, 40? ...

  • Cisco Systems ICM Software Version 4.5 - page 324

    324 Index Monitor ICR main w indow, 71 over view , 41 Multiplan data for mat (.SL K)., 102 Multiple com ponent rep orts, 88 example, 8 9 printing, 9 6 print jobs scheduli ng, 122 —N— NEC NEAX 2400 term inology, 34 Netscape Na vi gator, 47 nett r k01_stat u s_grid, 218 nettrk02 _g r id_la st _half _ho ur, 219 nettrk12 _g r id_ ha lf _hour, 22 0 ...

  • Cisco Systems ICM Software Version 4.5 - page 325

    Index 325 Index peripheral sk ill group, 239 wra p-up time enterprise skill g roup, 195 peripheral sk ill group, 246 periph 01 _pe r i pheral_s t a t us _r e p or t, 23 0 periph 02_gal axy_s oftware _status, 23 1 periph 03_gal axy_ha rdware _status, 2 32 Peripheral AC D specif ics, 32–36 agents, 2 7 def ined, 19, 24 mode , 230 on-line state, 2 30 ...

  • Cisco Systems ICM Software Version 4.5 - page 326

    326 Index Relative date opt ion, 88 time , 81 advant ages o f, 82 options, 81 Report(s ) , 86 –1 01 arra nging on sc reen, 92 chang ing back ground c olor, 1 03 com ponents of, 8 8, 89 data sav ing for expor t, 10 1 defi nition, 47, 59 deleting, 1 00 file c ontents, 87 modif ying, 99 sav ing, 86 saving chan ges to, 1 00 exam ples, 44, 5 0–51 ge ...

  • Cisco Systems ICM Software Version 4.5 - page 327

    Index 327 Index without a bandoned c alls enterprise service, 198 peripher al serv ice, 250 route, 27 2 Service Lev el enterpris e servic e, 205, 2 16 peripher al serv ice, 268 Servic e_Half_Hour table, 5 0 Service_Real _ Time table, 50 Setting thresh olds, 107–10 Sho w Text opt ion, 72 Shuff le Mode, 9 0 Siem ens 9751 A CD, 32 Siem ens Hicom 300 ...

  • Cisco Systems ICM Software Version 4.5 - page 328

    328 Index using m ultiple, 84 Term inology Monitor ICR, 46 peripher al-spec ific, 32 Thi s Month t ime option, 82 Week time optio n, 82 Year time option, 82 Thre shold Editor , 108 Thre shold(s) alerts , 61, 108, 109 and ser vice lev el, 109 exam ples of , 61–64 in multiple-c omponen t reports, 109 sav ing, 110 setting examples, 6 3 in reports, 1 ...

Manufacturer Cisco Systems Category Flat Panel Television

Documents that we receive from a manufacturer of a Cisco Systems ICM Software Version 4.5 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- ICM Software Version 4.5 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems ICM Software Version 4.5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems ICM Software Version 4.5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems ICM Software Version 4.5, service manual, brief instructions and user manuals Cisco Systems ICM Software Version 4.5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems ICM Software Version 4.5.

A complete manual for the device Cisco Systems ICM Software Version 4.5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems ICM Software Version 4.5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems ICM Software Version 4.5.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems ICM Software Version 4.5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems ICM Software Version 4.5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems ICM Software Version 4.5, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems ICM Software Version 4.5 - which should help us in our first steps of using Cisco Systems ICM Software Version 4.5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems ICM Software Version 4.5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems ICM Software Version 4.5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems ICM Software Version 4.5?

Use the form below

If you did not solve your problem by using a manual Cisco Systems ICM Software Version 4.5, ask a question using the form below. If a user had a similar problem with Cisco Systems ICM Software Version 4.5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)