English dropdown-ico

Manual Honda 08B21-SJC-102

17 pages 1.62 mb
Download

Go to site of 17

Summary
  • Honda 08B21-SJC-102 - page 1

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 1 of 17 INST ALLA TION INSTRUCTIONS Accessory Application Publications No. Issue Date MA Y 2007 200 6-2008 RIDGELINE REAR CAMERA A TT ACHMENT (EX-L WITH NA VI) AII 36587 08B21-SJC-1010-91 P ARTS LIST Att achment Kit P/N: 08B21-SJC-102 Rear camera trim Rear camera bracket ...

  • Honda 08B21-SJC-102 - page 2

    2 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 2 EPT sealers 4 Cushion tapes 2 Socket bolts, 4 x 10 mm 3 W asher screws, 4 x 12 mm 2 W asher screws, 4 x 6 mm Rear camera TOOLS AND SUPPLIES REQUIRED Phillips screwdriver Flat-tip screwdriver 10 mm Combination wrench Ratchet 10, 12 mm and 14 mm Socket T orque wr ...

  • Honda 08B21-SJC-102 - page 3

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 3 of 17 3. Remove the fuel fill door release handle. Remove the left front door sill trim (three clip s and three retaining tabs). 4. Remove the left rear door sill trim (three clip s and four retaining t abs). 5. Pull away the weatherstrip from the B-pillar lower trim p ...

  • Honda 08B21-SJC-102 - page 4

    4 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 9. Remove the rear seat belt anchor bolt and eight seat anchor bolts. • Seat belt anchor bolt torque: 30 to 35 N·m (22 to 25 lbs) 8. Remove the rear seat bracket covers; • Remove the left and right rear seat bracket covers (two clips for each cover). • Rem ...

  • Honda 08B21-SJC-102 - page 5

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 5 of 17 11. Remove the rear trim panel cover (eight clip s and two retaining t abs). 14 . Remove the left rear lower anchor bolt cover , and remove the left rear seat belt lower anchor bolt. • Seat belt anchor bolt torque: 30 to 35 N·m (22 to 25 lbs) 12 . Remove the l ...

  • Honda 08B21-SJC-102 - page 6

    6 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 17. Remove the rear bumper: • Remove the license plate (two bolts). • Remove two bolts, six self-t apping screws and six clips from the rear bumper . • Pull the rear bumper toward you. Unplug the two vehicle connectors, and remove the rear bumper . • Set ...

  • Honda 08B21-SJC-102 - page 7

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 7 of 17 22 . Remove the left front anchor (two TORX bolts). 21. Remove the left C-pillar outer trim (slide rearward, and unplug the vehicle connector). Remove the clips from the body , and reinstall the clips to the lef t C-pillar outer trim. 19 . Remove and discard the ...

  • Honda 08B21-SJC-102 - page 8

    8 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 24 . Remove the left bed rail trim: • Remove the screw cover (four retaining t abs). • Remove the self-tapping screw . • Pull the left bed rail trim back to release the six clips, and remove the lef t bed rail trim. 25. Remove the left lower bed light (one ...

  • Honda 08B21-SJC-102 - page 9

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 9 of 17 28 . Remove the tailgate trim: • Remove the four screws and release the one end clip on each side. • Sharply push the tailgate to the right to release the 16 clips from the trim. • Remove the 16 clips from the t ailgate and reinstall the 16 clip s to the ta ...

  • Honda 08B21-SJC-102 - page 10

    10 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 33 . Install one blind nut into each 8 mm hole. 34 . Remove the four screws from the rear camera. Route the rear camera harness through the rear camera subbracket, and install the rear camera subbracket to the rear camera with the four screws. 35. Attach a piece ...

  • Honda 08B21-SJC-102 - page 11

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 11 of 17 36. Route the rear camera harness through the 10 mm hole in the tailgate, and seat the grommet into the 10 mm hole. 38 . Align the two locating tabs on the rear camera subbracket with the slots in the rear camera bracket, and install two 4 x 6 mm washer-screws. ...

  • Honda 08B21-SJC-102 - page 12

    12 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 40. Route the rear camera harness along the tailgate as shown. 41 . Remove the TORX bolt from the tailgate hinge, and attach the harness clamp bracket B to the tailgate using the TORX bolt you just removed. Do not tighten the TORX bolt at this time. 39 . Install ...

  • Honda 08B21-SJC-102 - page 13

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 13 of 17 42. Secure the rear camera harness to the harness clamp bracket B with three small wire ties. Attach the wire tie over the tape att ached to the harness. 45. Pull the rear camera harness out from the inside of the tailgate, and secure the rear camera harness to ...

  • Honda 08B21-SJC-102 - page 14

    14 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 51. Route the rear camera harness out through the bed panel hole, and secure the rear camera harness to the vehicle harness with one wire tie just inside the panel hole. 52. Route the rear camera harness along the vehicle harness towards the front of the vehicle ...

  • Honda 08B21-SJC-102 - page 15

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 15 of 17 53. Remove the vehicle grommet from the left C-pillar . 54. Insert the rear camera harness through the grommet, and route the rear camera harness through the vehicle grommet opening. Seat the grommet into the grommet hole. 55 . Using electrical tape, secure the ...

  • Honda 08B21-SJC-102 - page 16

    16 of 17 AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved. 63 . Slide the driver’s seat back and forth to check that the rear camera subharness is not pulled too tight or is too loose. 62. Plug the rear camera subharness 6-pin connector into the Navi control unit. 61. Route the rear camera subharness along the vehicle ...

  • Honda 08B21-SJC-102 - page 17

    © 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705) 17 of 17 64 . Reconnect the negative cable to the battery . T urn the key to the ON (II) position, and enter the Navi code. 65 . Move the shift knob to the “R” position. 66. Loosen the two 4 x 6 mm washer-screws. Adjust the rear camera angle up or down so that the en ...

Manufacturer Honda Category Automobile Electronics

Documents that we receive from a manufacturer of a Honda 08B21-SJC-102 can be divided into several groups. They are, among others:
- Honda technical drawings
- 08B21-SJC-102 manuals
- Honda product data sheets
- information booklets
- or energy labels Honda 08B21-SJC-102
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honda 08B21-SJC-102.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honda 08B21-SJC-102, service manual, brief instructions and user manuals Honda 08B21-SJC-102. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honda 08B21-SJC-102.

Similar manuals

A complete manual for the device Honda 08B21-SJC-102, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honda 08B21-SJC-102 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honda 08B21-SJC-102.

A complete Honda manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honda 08B21-SJC-102 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honda 08B21-SJC-102, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honda 08B21-SJC-102, that we can find in the current document
3. Tips how to use the basic functions of the device Honda 08B21-SJC-102 - which should help us in our first steps of using Honda 08B21-SJC-102
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honda 08B21-SJC-102
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honda 08B21-SJC-102 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honda 08B21-SJC-102?

Use the form below

If you did not solve your problem by using a manual Honda 08B21-SJC-102, ask a question using the form below. If a user had a similar problem with Honda 08B21-SJC-102 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)