English dropdown-ico

Manual NEC ISDN-PRI

134 pages 0.89 mb
Download

Go to site of 134

Summary
  • NEC ISDN-PRI - page 1

    Aspire ISDN - PRI T echnical Suppor t W eb Site: http://ws1.necii.com (registration is required) ...

  • NEC ISDN-PRI - page 2

    This manual has been developed by NEC Unified Solutions, Inc. It is intended for the use of its customers and service personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreciated. Forward your remarks to: NEC Unified Solutions, Inc. 4 For ...

  • NEC ISDN-PRI - page 3

    Ta b le of Contents P/N 92000PRI04 Ta b le of Contents ◆ i Section 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ISDN PRI Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction to ISDN ...

  • NEC ISDN-PRI - page 4

    Ta b le of Contents ii ◆ Ta b le of Contents P/N 92000PRI04 Program 10 : System Configuration Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10-03 : PCB Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10-08 : Pre-Ringing Setu ...

  • NEC ISDN-PRI - page 5

    Ta b le of Contents P/N 92000PRI04 Ta b le of Contents ◆ iii Program 22 : Incoming Call Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 22-01 : System Options for Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 22-02 : Incoming Call Trunk Setu ...

  • NEC ISDN-PRI - page 6

    Ta b le of Contents iv ◆ Ta b le of Contents P/N 92000PRI04 ...

  • NEC ISDN-PRI - page 7

    Section 1 ISDN PRI Features Aspire ISDN PRI Manual ◆ 1 Section 1 ISDN PRI Features Section 1: ISDN PRI Features ...

  • NEC ISDN-PRI - page 8

    Section 1 ISDN PRI Features 2 ◆ Aspire ISDN PRI Manual ...

  • NEC ISDN-PRI - page 9

    Intr oduction to ISDN About ISDN Aspire ISDN PRI Manual ◆ 3 Introduction to ISDN About ISDN !! Important !! ISDN is an emerging technology on the leading edge of international digital communication's net- working. Alw ays check with your NEC Uni fi ed Solutions T echnical Service Representati ve before setting up your ISDN application. W or ...

  • NEC ISDN-PRI - page 10

    Intr oduction to ISDN About ISDN 4 ◆ Aspire ISDN PRI Manual ...

  • NEC ISDN-PRI - page 11

    ISDN Features Primary Rate Interface (PRI) Installation Aspire ISDN PRI Manual ◆ 5 ISDN Features Primary Rate Interface (PRI) Installation Description Y our system is compatible with ISDN Primary Rate Interface (PRI) services. The PRI services currently supported include: ● Basic PRI Call Control (BCC). ● Display of incoming caller's num ...

  • NEC ISDN-PRI - page 12

    ISDN Features Primary Rate Interface (PRI) Installation 6 ◆ Aspire ISDN PRI Manual T1/PRI Interface PCB Switches Switch Name Switch P osition Result SW100 1.5M(PI/T1) Connecting a PRI/T1 (1.544Mb/s) line. 2M (PRI/E1) Connecting a PRI/E1 (2.048Mb/s) line. SW101 T T -Bus Connection S S-Bus Connection SW3 (4 bit dip switch) PRI (1.544Mb/s) T1 (1.544 ...

  • NEC ISDN-PRI - page 13

    ISDN Features Primary Rate Interface (PRI) Installation Aspire ISDN PRI Manual ◆ 7 Connector Pin-Outs on T1/PRI PCB RJ45 Cable Connector - CN3 S-Bus Connection Pin No. Connection 1T A 2T B 3- 4R A 5R B 6- 7- 8- RJ45 Cable Connector - CN3 T -Bus Connection Pin No. Connection 1R A 2R B 3- 4T A 5T B 6- 7- 8- Network Interface Pinout f or the 8-Pin R ...

  • NEC ISDN-PRI - page 14

    ISDN Features Primary Rate Interface (PRI) Installation 8 ◆ Aspire ISDN PRI Manual To install a T1/PRI Interface PCB: 1. Attach a grounded wrist strap to your wrist and a grounded metal object (such as CEU ground). 2. T o remov e the front cover , loosen the two front panel retaining scre ws. Slide the front cover to the right then pull straight ...

  • NEC ISDN-PRI - page 15

    ISDN Features Primary Rate Interface (PRI) Installation Aspire ISDN PRI Manual ◆ 9 Figure 1: Satellite CSU Connection See Pin-Out Information (For connection to T1 Network, use A T&T T ype ABAM cable or equivalent) (individually-shielded twisted pair , rated at 100 ohms at 1 Mhz). Satellite 931 CSU T elco Line RJ48 Jack RJ48C-toRJ48C Cable (s ...

  • NEC ISDN-PRI - page 16

    ISDN Features Primary Rate Interface (PRI) Installation 10 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 17

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 11 Primary Rate Interface (PRI), Answering Calls Description The system provides fl e xible routing of incoming PRI calls to help meet the exact site requirements. This allo ws PRI calls to ring and be answered at any combination of system extensions. Many of th ...

  • NEC ISDN-PRI - page 18

    ISDN Features Primary Rate Interface (PRI), Answering Calls 12 ◆ Aspire ISDN PRI Manual How the T elco Handles PRI T runks In many cases, the telco will route an incoming PRI call to an y of the av ailable 23 circuits on the PRI PCB. This makes it dif fi cult to determine the type of call by the trunk that is ringing. It also prev ents using Dir ...

  • NEC ISDN-PRI - page 19

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 13 Pr ogramming Start Continued on the following page. In 10-03-01, determine the mode of the PRI PCB (0=not set, 1=T-Bus, 2=S-Bus, 3=Network Mode (leased), 4=Network Mode (interconnected), 5=Network Mode (interconnected, fixed layer 1=NT), 6=S-Poi ...

  • NEC ISDN-PRI - page 20

    ISDN Features Primary Rate Interface (PRI), Answering Calls 14 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) Continued from the previous page. Should an extension be able to display the reason why a call is transferred to it? In 20-13-23, set the extension's COS to '1'. In 20-13-23, set the extension& ...

  • NEC ISDN-PRI - page 21

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 15 Pr ogramming (Cont’ d) Should all PRI Trunks ring the same extensions? In 22-02-01, enter 3. Refer to the Aspire Software Manual for DID programming. In 22-02-01, enter 0. Yes No In 22-05-01, assign all the trunks on a PRI PCB to the ...

  • NEC ISDN-PRI - page 22

    ISDN Features Primary Rate Interface (PRI), Answering Calls 16 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) Continued from the previous page. If a PRI call rings longer than a specified interval, should the ring cadence change to a unique "alarm" sound? In 22-01-02, Enter 1. Also, set the interval in 22-0 ...

  • NEC ISDN-PRI - page 23

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 17 Pr ogramming (Cont’ d) ➻ 10-03-01 : PCB Setup - ISDN Line Mode Setup and con fi rm the Basic Con fi guration data for each PCB. This program selects the ISDN Line Mode: 0=Not set, 1=T -Bus, 2=S-Bus, 3=Network Mode (Leased Line), 4=Network Mode (Intercon- ...

  • NEC ISDN-PRI - page 24

    ISDN Features Primary Rate Interface (PRI), Answering Calls 18 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) ➻ 10-03-11 : PCB Setup - Networking System Number Setup and con fi rm the Basic Con fi guration data for each PCB. If the system is networked, de fi ne the system number (0-50). Default Setting: System Number (0). ➻ 10-03-12 : P ...

  • NEC ISDN-PRI - page 25

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 19 Pr ogramming (Cont’ d) ➻ 15-02-02 : Multi-Line T elephone Basic Data Setup - T runk Ring T one Use this option to change the ringing pitch of incoming trunk calls to ke ysets. Default Setting: Midrang e (2) ➻ 15-06-01 : T runk Access Map for Extensions A ...

  • NEC ISDN-PRI - page 26

    ISDN Features Primary Rate Interface (PRI), Answering Calls 20 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) ➻ 22-02-01 : Incoming Call T runk Setup Use this option to set the service type for PRI trunks using. Enter 0 (for normal operation) or 3 (to hav e the PRI trunk use the DID tables and route on the last three digits a caller dials). ...

  • NEC ISDN-PRI - page 27

    ISDN Features Primary Rate Interface (PRI), Answering Calls Aspire ISDN PRI Manual ◆ 21 Pr ogramming (Cont’ d) ➻ 35-02-16 : SMDR Output Options, T runk Name or Received Dialed Number If SMDR is used, this option allo ws you to determine how the SMDR should print incoming calls on ANI/DNIS or DID trunks (0=print trunk port name assigned in Pro ...

  • NEC ISDN-PRI - page 28

    ISDN Features Primary Rate Interface (PRI), Answering Calls 22 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 29

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 23 Primary Rate Interface (PRI), Placing Calls Description The system provides 23 high-speed state-of-the-art digital trunks on a double pair of wires. Conditions PRI requires the installation of a CSU/DSU Unit and interconnecting cables. Consult with your sales re ...

  • NEC ISDN-PRI - page 30

    ISDN Features Primary Rate Interface (PRI), Placing Calls 24 ◆ Aspire ISDN PRI Manual Pr ogramming Start Continued on the following page. In 10-03-01, determine the mode of the PRI PCB (0=not set, 1=T-Bus, 2=S-Bus, 3=Network Mode (leased), 4=Network Mode (interconnected), 5=Network Mode (interconnected, fixed layer 1=NT), 6=S-Point ...

  • NEC ISDN-PRI - page 31

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 25 Pr ogramming (Cont’ d) Should system users be able to place outgoing calls on trunks? In 20-08-02, enter 1 to enable outgoing calls. In 20-08-02, enter 0 to disable outgoing calls. Yes No Stop Continued on next page. In 2 ...

  • NEC ISDN-PRI - page 32

    ISDN Features Primary Rate Interface (PRI), Placing Calls 26 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) Continued from previous page. Continued on next page. Do you need to restrict certain extensions from placing calls on certain trunks? Build an outgoing restriction matrix. In 14-07-01 for each Access ...

  • NEC ISDN-PRI - page 33

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 27 Pr ogramming (Cont’ d) Continued from previous page. If a user preselects a line, how long should the system remember the preselection? In 20-02-06, enter the preselection interval. Should extension users have one-button placin ...

  • NEC ISDN-PRI - page 34

    ISDN Features Primary Rate Interface (PRI), Placing Calls 28 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) Stop Continued from previous page. Do you want to set up an Alternate Trunk Route Access Code ? Stop In 11-01-01, set up a Service Code for Alternate Trunk Route Access. For example, to make 50 t ...

  • NEC ISDN-PRI - page 35

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 29 Pr ogramming (Cont’ d) ➻ 10-03-01 : PCB Setup - ISDN Line Mode Setup and con fi rm the Basic Con fi guration data for each PCB. This program selects the ISDN Line Mode: 0=Not set, 1=T -Bus, 2=S-Bus, 3=Network Mode (Leased Line), 4=Network Mode (Intercon- n ...

  • NEC ISDN-PRI - page 36

    ISDN Features Primary Rate Interface (PRI), Placing Calls 30 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) ➻ 10-03-13 : PCB Setup - Loss-of-Signal Detection Limit Setup and con fi rm the Basic Con fi guration data for each PCB. Select the loss-of-signal detection limit. In short-haul mode: 0=0.91V , 1=0.74V , 2=0.59V , 3=0.42V , 4=0.32V , ...

  • NEC ISDN-PRI - page 37

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 31 Pr ogramming (Cont’ d) ➻ 15-06-01 : T runk Access Map for Extensions Assign T runk Access Maps (200) to extensions. Y ou must set up the T runk Access Maps in Program 14-07-01. This allo ws you to control extension access to the PRI trunks. Default Setting: ...

  • NEC ISDN-PRI - page 38

    ISDN Features Primary Rate Interface (PRI), Placing Calls 32 ◆ Aspire ISDN PRI Manual Pr ogramming (Cont’ d) ➻ 21-12-01 : ISDN Calling Party Number Setup f or T runks Assign Calling Party Numbers for each trunk (maximum 16 digits per entry). When a call is made by an extension which does not ha ve an Extension Calling Number assigned (Program ...

  • NEC ISDN-PRI - page 39

    ISDN Features Primary Rate Interface (PRI), Placing Calls Aspire ISDN PRI Manual ◆ 33 Related Features Handsfree W ith Automatic Handsfree, an extension user can press a line ke y to place a trunk call without fi rst lift- ing the handset or pressing SPK. Users without Automatic Handsfree can preselect a line ke y before lifting the handset or p ...

  • NEC ISDN-PRI - page 40

    ISDN Features Primary Rate Interface (PRI), Placing Calls 34 ◆ Aspire ISDN PRI Manual Operation (Cont’ d) To place a call over a speci fi c PRI trunk: 1. At ke yset, press idle CALL key . OR At single line set, lift handset. 2. Dial #9. 3. Dial line PRI line number (e.g., 005 for line 5). 4. Dial number . OR 1. At ke yset, press line key (PGM ...

  • NEC ISDN-PRI - page 41

    Section 2 ISDN PRI Pr ogramming Aspire ISDN PRI Manual ◆ 35 Section 2 ISDN PRI Programming Section 2: ISDN PRI Pr ogramming ...

  • NEC ISDN-PRI - page 42

    Section 2 ISDN PRI Pr ogramming 36 ◆ Aspire ISDN PRI Manual ...

  • NEC ISDN-PRI - page 43

    Pr ogramming Bef ore Y ou Star t Pr ogramming Aspire ISDN PRI Manual ◆ 37 Programming Before You Start Programming Bef ore Reading This Section This section provides you with detailed information about the system programs. By changing a program, you change the way the feature associated with that program works. In this section, you’ ll fi nd o ...

  • NEC ISDN-PRI - page 44

    Pr ogramming Bef ore Y ou Star t Pr ogramming 38 ◆ Aspire ISDN PRI Manual How to Enter the Pr ogramming Mode To enter the programming mode: 1. Go to any w orking display telephone. In a newly installed system, use e xtension 301 (port 1). 2. Do not lift the handset. 3. Press CALL1. 4. # * # * 5. Dial the system password + HOLD. Refer to the follo ...

  • NEC ISDN-PRI - page 45

    Pr ogramming Bef ore Y ou Star t Pr ogramming Aspire ISDN PRI Manual ◆ 39 Using Ke ys to Move Ar ound in the Pr ograms Once you enter the programming mode, use the ke ys in the follo wing chart to enter data, edit data and mo ve around in the menus. Ke ys for Entering Data Use this key ... When y ou want to . . . 0-9 and * Enter data into a progr ...

  • NEC ISDN-PRI - page 46

    Pr ogramming Bef ore Y ou Star t Pr ogramming 40 ◆ Aspire ISDN PRI Manual Pr ogramming Names and T ext Messages Se veral programs (e.g., Program 20-16: Selectable Display Messages) require you to enter text. Use the fol- lo wing chart when entering and editing text. When using the k eypad digits, press the key once for the fi rst character , twi ...

  • NEC ISDN-PRI - page 47

    Pr ogramming Bef ore Y ou Star t Pr ogramming Aspire ISDN PRI Manual ◆ 41 With Software 2.05+: When using i-Series telephones on the Aspire system, not all the same characters are a vailable. Refer to the follo wing chart for the i-Series characters: Use this keypad digit . . . When y ou want to. . . 1 Enter characters: 1 @ [ ¥ ] ^ _ ` { | } → ...

  • NEC ISDN-PRI - page 48

    Pr ogramming Bef ore Y ou Star t Pr ogramming 42 ◆ Aspire ISDN PRI Manual Using Soft Ke ys For Programming Each Aspire display telephone provides interacti ve soft ke ys for intuitiv e feature access. The options for these ke ys will automatically change depending on where you are in the system programming. Simply press the Soft K ey located belo ...

  • NEC ISDN-PRI - page 49

    Pr ogram 10 : System Con fi guration Setup 10-03 : PCB Setup Aspire ISDN PRI Manual ◆ 43 Program 10 : System Con fi guration Setup 10-03 : PCB Setup Description Use Pr ogram 10-03 : PCB Setup to setup and con fi rm the Basic Con fi guration data for each PCB. When changing a de fi ned terminal type, fi rst set the type to ‘0’ and then p ...

  • NEC ISDN-PRI - page 50

    Pr ogram 10 : System Con fi guration Setup 10-03 : PCB Setup 44 ◆ Aspire ISDN PRI Manual Note 1. The start port number of a PRI line is displayed. Thirty logic ports are automatically assigned to a PRI line. Note 2. Each timer v alue of Layer3 is set up for each type in Program 81-06 (T -Bus) and Pro- gram 82-06 (S-Bus). Conditions (A.) When cha ...

  • NEC ISDN-PRI - page 51

    Pr ogram 10 : System Con fi guration Setup 10-03 : PCB Setup Aspire ISDN PRI Manual ◆ 45 T elephone Pr ogramming Instructions To enter data for Pr ogram 10-03 (PCB Setup): 1. Enter the programming mode. 2. 10 03 3. Enter the number of the item you want to program. 4. Select a slot number to be programmed by pressing the V OLUME ▲ or V OLUME ? ...

  • NEC ISDN-PRI - page 52

    Pr ogram 10 : System Con fi guration Setup 10-08 : Pre-Ringing Setup 46 ◆ Aspire ISDN PRI Manual 10-08 : Pre-Ringing Setup Description Use Pr ogram 10-08 : Pr e-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets ho w a trunk initially rings a telephone. W ith pre-ringing, a burst of ringing occurs as soon as the trunk’ s ...

  • NEC ISDN-PRI - page 53

    Pr ogram 10 : System Con fi guration Setup 10-08 : Pre-Ringing Setup Aspire ISDN PRI Manual ◆ 47 T elephone Pr ogramming Instructions To enter data for Pr ogram 10-08 (Pre-Ringing Setup): 1. Enter the programming mode. 2. 10 08 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. 5. Enter data for ...

  • NEC ISDN-PRI - page 54

    Pr ogram 10 : System Con fi guration Setup 10-08 : Pre-Ringing Setup 48 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 55

    Pr ogram 11 : System Numbering 11-01 : System Numbering Aspire ISDN PRI Manual ◆ 49 Program 11 : System Numbering 11-01 : System Numbering Description Use Program 11-01 : System Numbering to set the system’ s internal (Intercom) numbering plan. The numbering plan assigns the fi rst and second digits dialed and af fects the digits an extension ...

  • NEC ISDN-PRI - page 56

    Pr ogram 11 : System Numbering 11-01 : System Numbering 50 ◆ Aspire ISDN PRI Manual Description (Cont’ d) Step 2: Specify the length of the code you want to c hang e After you specify a single or two digit code, you must tell the system ho w many digits com- prise the code. This is the Number of Digits Required column in the System Numbering (p ...

  • NEC ISDN-PRI - page 57

    Pr ogram 11 : System Numbering 11-01 : System Numbering Aspire ISDN PRI Manual ◆ 51 System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 58

    Pr ogram 11 : System Numbering 11-01 : System Numbering 52 ◆ Aspire ISDN PRI Manual System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 59

    Pr ogram 11 : System Numbering 11-01 : System Numbering Aspire ISDN PRI Manual ◆ 53 System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 60

    Pr ogram 11 : System Numbering 11-01 : System Numbering 54 ◆ Aspire ISDN PRI Manual System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 61

    Pr ogram 11 : System Numbering 11-01 : System Numbering Aspire ISDN PRI Manual ◆ 55 System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 62

    Pr ogram 11 : System Numbering 11-01 : System Numbering 56 ◆ Aspire ISDN PRI Manual System Numbering Dial T ypes: 1=Service Code , 2=Extension Number , 3=T runk Access, 4=Special T runk Access, 5=Operator Access, 6=Fle xible Routing, 8=Networking, 0=Not Used Dialed Number Number of Digits Required Default New Dial T ype Default New Network System ...

  • NEC ISDN-PRI - page 63

    Pr ogram 11 : System Numbering 11-01 : System Numbering Aspire ISDN PRI Manual ◆ 57 Conditions None Feature Cr oss Reference ● Flexible System Numbering T elephone Pr ogramming Instructions To enter data for Pr ogram 11-01 (System Numbering): 1. Enter the programming mode. 2. 11 01 3. Enter the number of the item you want to program. 4. Select ...

  • NEC ISDN-PRI - page 64

    Pr ogram 11 : System Numbering 11-09 : T runk Access Code 58 ◆ Aspire ISDN PRI Manual 11-09 : Trunk Access Code Description Use Program 11-09 : T runk Access Code to assign the trunk access code (normally 9). The trunk access code can be set from 1 to 8 digits which is de fi ned to type 3 and 4 in Program 11-01. This is the code extension users ...

  • NEC ISDN-PRI - page 65

    Pr ogram 11 : System Numbering 11-09 : T runk Access Code Aspire ISDN PRI Manual ◆ 59 T elephone Pr ogramming Instructions To enter data for Pr ogram 11-09 (T runk Access Code): 1. Enter the programming mode. 2. 11 09 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. 5. Enter data for the next it ...

  • NEC ISDN-PRI - page 66

    Pr ogram 11 : System Numbering 11-09 : T runk Access Code 60 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 67

    Pr ogram 14 : T runk, Basic Setup 14-01 : Basic T runk Data Setup Aspire ISDN PRI Manual ◆ 61 Program 14 : Trunk, Basic Setup 14-01 : Basic Trunk Data Setup Description Use Program 14-01 : Basic T runk Data Setup to set the basic options for each trunk port. Refer to the chart belo w for a description of each option, its range and default setting ...

  • NEC ISDN-PRI - page 68

    Pr ogram 14 : T runk, Basic Setup 14-01 : Basic T runk Data Setup 62 ◆ Aspire ISDN PRI Manual Default Conditions None Feature Cr oss Reference Refer to features in abov e chart. T elephone Pr ogramming Instructions To enter data for Pr ogram 14-01 (Basic T runk Data Setup): 1. Enter the programming mode. 2. 14 01 3. Enter the number of the item y ...

  • NEC ISDN-PRI - page 69

    Pr ogram 14 : T runk, Basic Setup 14-05 : T runk Group Aspire ISDN PRI Manual ◆ 63 14-05 : Trunk Group Description Use Program 14-05 : T runk Groups to assign trunks to Trunk Groups. Y ou can also assign the outbound priority for trunks within the group. When users dial up the trunk group, they seize the trunks in the order you specify in the out ...

  • NEC ISDN-PRI - page 70

    Pr ogram 14 : T runk, Basic Setup 14-05 : T runk Group 64 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 14-05 (T runk Group): 1. Enter the programming mode. 2. 14 05 3. Enter the number of the item you want to program. 4. Select the trunk number to be programmed by pressing the FLASH or the V OLUME ▲ o ...

  • NEC ISDN-PRI - page 71

    Pr ogram 14 : T runk, Basic Setup 14-07 : T runk Access Map Setup Aspire ISDN PRI Manual ◆ 65 14-07 : Trunk Access Map Setup Description Use Program 14-07 : T runk Access Map Setup to set up the T runk Access Maps. This sets an extension’ s access options for trunks. For example, an e xtension can only place outgoing calls on trunks to which it ...

  • NEC ISDN-PRI - page 72

    Pr ogram 14 : T runk, Basic Setup 14-07 : T runk Access Map Setup 66 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 14-07 (T runk Access Map Setup): 1. Enter the programming mode. 2. 14 07 3. Enter the number of the item you want to program. 4. Select the Access Map number to be programmed by pressing the ...

  • NEC ISDN-PRI - page 73

    Pr ogram 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup Aspire ISDN PRI Manual ◆ 67 Program 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup Description Use Program 15-01 : Basic Extension Data Setup to de fi ne the basic settings for each e xtension. Input Data Conditions None Feature Cr oss Reference Refer to char ...

  • NEC ISDN-PRI - page 74

    Pr ogram 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup 68 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 15-01 (Basic Extension Data Setup): 1. Enter the programming mode. 2. 15 01 3. Enter the number of the item you want to program. 4. Select the telephone number to be programmed by pres ...

  • NEC ISDN-PRI - page 75

    Pr ogram 15 : Extension, Basic Setup 15-02 : Multi-Line T elephone Basic Data Setup Aspire ISDN PRI Manual ◆ 69 15-02 : Multi-Line Telephone Basic Data Setup Description Use Program 15-02 : Multi-Line T elephone Basic Data Setup to set up various ke yset options. Input Data Level: Aspire S Aspire IN •A v ailable. • A vailable. • Item 24 av ...

  • NEC ISDN-PRI - page 76

    Pr ogram 15 : Extension, Basic Setup 15-02 : Multi-Line T elephone Basic Data Setup 70 ◆ Aspire ISDN PRI Manual Conditions None Feature Cr oss Reference Refer to abov e chart. T elephone Pr ogramming Instructions To enter data for Pr ogram 15-02 (Multi-Line T elephone Basic Data Setup): 1. Enter the programming mode. 2. 15 02 3. Enter the number ...

  • NEC ISDN-PRI - page 77

    Pr ogram 15 : Extension, Basic Setup 15-06 : T runk Access Map for Extensions Aspire ISDN PRI Manual ◆ 71 15-06 : Trunk Access Map for Extensions Description Use Program 15-06 : T runk Access Map f or Extensions to de fi ne the trunk access map for each extension. An extension can only place outgoing calls on trunks to which it has outgoing acce ...

  • NEC ISDN-PRI - page 78

    Pr ogram 15 : Extension, Basic Setup 15-06 : T runk Access Map for Extensions 72 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 15-06 (T runk Access Map for Extensions): 1. Enter the programming mode. 2. 15 06 3. Enter the number of the item you want to program. 4. Select the telephone number to be progra ...

  • NEC ISDN-PRI - page 79

    Pr ogram 15 : Extension, Basic Setup 15-07 : Programmab le Function Ke ys Aspire ISDN PRI Manual ◆ 73 15-07 : Programmable Function Keys Description Use Program 15-07 : Pr ogrammable Function Keys to set the functions of an e xtension’ s Pro- grammable Function K ey . F or certain functions, you can append data to the ke y’ s basic function. ...

  • NEC ISDN-PRI - page 80

    Pr ogram 15 : Extension, Basic Setup 15-07 : Programmab le Function Ke ys 74 ◆ Aspire ISDN PRI Manual [2] Appearance Function Level (*00 - *99) (Service Code 852) Conditions When a ke y is programmed using service code 852, that key cannot be programmed with a function using the 851 code until the ke y is unde fi ned (000). For example with a Pa ...

  • NEC ISDN-PRI - page 81

    Pr ogram 20 : System Option Setup 20-02 : System Options for Multi-Line T elephones Aspire ISDN PRI Manual ◆ 75 Program 20 : System Option Setup 20-02 : System Options for Multi-Line Telephones Description Use Program 20-02 : System Options f or Multi-Line T elephones to set various system options for Multi-Line T elephones. Input Data Conditions ...

  • NEC ISDN-PRI - page 82

    Pr ogram 20 : System Option Setup 20-02 : System Options for Multi-Line T elephones 76 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 20-02 (System Options for Multi-Line T elephones): 1. Enter the programming mode. 2. 20 02 3. Enter the number of the item you want to program. 4. Enter data for the item y ...

  • NEC ISDN-PRI - page 83

    Pr ogram 20 : System Option Setup 20-06 : Class of Ser vice for Extensions Aspire ISDN PRI Manual ◆ 77 20-06 : Class of Service for Extensions Description Use Program 20-06 : Class of Service f or Extensions to assign a Class of Service to an extension. There are15 Classes of Service that can be assigned. T o specify the options in each Class of ...

  • NEC ISDN-PRI - page 84

    Pr ogram 20 : System Option Setup 20-06 : Class of Ser vice f or Extensions 78 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 20-06 (Class of Service for Extensions): 1. Enter the programming mode. 2. 20 06 3. Enter the number of the item you want to program. 4. Select the telephone number to be programme ...

  • NEC ISDN-PRI - page 85

    Pr ogram 20 : System Option Setup 20-08 : Class of Ser vice Options (Outgoing Call Ser vice) Aspire ISDN PRI Manual ◆ 79 20-08 : Class of Service Options (Outgoing Call Service) Description Use Program 20-08 : Class of Ser vice Options (Outgoing Call Service) to de fi ne the outgoing call feature av ailability for each extension’ s Class of Se ...

  • NEC ISDN-PRI - page 86

    Pr ogram 20 : System Option Setup 20-08 : Class of Ser vice Options (Outgoing Call Service) 80 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 20-08 (Class of Service Options (Outgoing Call Ser vice)): 1. Enter the programming mode. 2. 20 08 3. Enter the number of the item you want to program. 4. Select th ...

  • NEC ISDN-PRI - page 87

    Pr ogram 20 : System Option Setup 20-09 : Class of Ser vice Options (Incoming Call Ser vice) Aspire ISDN PRI Manual ◆ 81 20-09 : Class of Service Options (Incoming Call Service) Description Use Program 20-09 : Class of Ser vice Options (Incoming Call Service) to de fi ne the incoming call feature av ailability for each extension’ s Class of Se ...

  • NEC ISDN-PRI - page 88

    Pr ogram 20 : System Option Setup 20-09 : Class of Ser vice Options (Incoming Call Service) 82 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data f or Pr ogram 20-09 (Class of Service Options (Incoming Call Ser vice)): 1. Enter the programming mode. 2. 20 09 3. Enter the number of the item you want to program. 4. Select t ...

  • NEC ISDN-PRI - page 89

    Pr ogram 20 : System Option Setup 20-13 : Class of Ser vice Options (Supplementar y Service) Aspire ISDN PRI Manual ◆ 83 20-13 : Class of Service Options (Supplementary Service) Description Use Program 20-13 : Class of Ser vice Options (Supplementary Service) to de fi ne the supple- mentary feature av ailability for each extension’ s Class of ...

  • NEC ISDN-PRI - page 90

    Pr ogram 20 : System Option Setup 20-13 : Class of Ser vice Options (Supplementary Service) 84 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 20-13 (Class of Service Options (Supplementary Service)): 1. Enter the programming mode. 2. 20 13 3. Enter the number of the item you want to program. 4. Select the ...

  • NEC ISDN-PRI - page 91

    Pr ogram 20 : System Option Setup 20-15 : Ring Cycle Setup Aspire ISDN PRI Manual ◆ 85 20-15 : Ring Cycle Setup Description Use Program 20-15 : Ring Cycle Setup to de fi ne the ringing c ycles for each ring type. Input Data Level: Aspire S Aspire IN •A v ailable. • A vailable. Item No. Incoming Signal T ype Ringing Cycle Default 01 Normal In ...

  • NEC ISDN-PRI - page 92

    Pr ogram 20 : System Option Setup 20-15 : Ring Cycle Setup 86 ◆ Aspire ISDN PRI Manual Conditions None Feature Cr oss Reference None T elephone Pr ogramming Instructions To enter data for Pr ogram 20-15 (Ring Cycle Setup): 1. Enter the programming mode. 2. 20 15 3. Enter the number of the item you want to program. 4. Enter data for the item you s ...

  • NEC ISDN-PRI - page 93

    Pr ogram 20 : System Option Setup 20-19 : System Options for Caller ID Aspire ISDN PRI Manual ◆ 87 20-19 : System Options for Caller ID Description Use Program 20-19 : System Options for Caller ID to de fi ne the system options for the Caller ID feature. Input Data Conditions None Feature Cr oss Reference ● Caller ID T elephone Pr ogramming In ...

  • NEC ISDN-PRI - page 94

    Pr ogram 20 : System Option Setup 20-19 : System Options for Caller ID 88 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 95

    Pr ogram 21 : Outgoing Call Setup 21-01 : System Options for Outgoing Calls Aspire ISDN PRI Manual ◆ 89 Program 21 : Outgoing Call Setup 21-01 : System Options for Outgoing Calls Description Use Pr ogram 21-01 : System Options f or Outgoing Calls to set the system options for Outgoing Call Service. Input Data Conditions None Feature Cr oss Refere ...

  • NEC ISDN-PRI - page 96

    Pr ogram 21 : Outgoing Call Setup 21-08 : Repeat Dial Setup 90 ◆ Aspire ISDN PRI Manual 21-08 : Repeat Dial Setup Description Use Program 21-08 : Repeat Dial Setup to de fi ne the automatic Repeat Dial data. Input Data Conditions None Feature Cr oss Reference None Level: Aspire S Aspire IN •A v ailable. • A vailable. Item No. Item Input Data ...

  • NEC ISDN-PRI - page 97

    Pr ogram 21 : Outgoing Call Setup 21-08 : Repeat Dial Setup Aspire ISDN PRI Manual ◆ 91 T elephone Pr ogramming Instructions To enter data for Pr ogram 21-08 (Repeat Dial Setup): 1. Enter the programming mode. 2. 21 08 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. 5. Enter data for the next i ...

  • NEC ISDN-PRI - page 98

    Pr ogram 21 : Outgoing Call Setup 21-12 : ISDN Calling P ar ty Number Setup f or T runks 92 ◆ Aspire ISDN PRI Manual 21-12 : ISDN Calling Party Number Setup for Trunks Description Use Program 21-12 : ISDN Calling P arty Number Setup for T runks to assign Calling Party Numbers for each trunk (maximum 16 digits per entry). When a call is made by an ...

  • NEC ISDN-PRI - page 99

    Pr ogram 21 : Outgoing Call Setup 21-12 : ISDN Calling P ar ty Number Setup f or T runks Aspire ISDN PRI Manual ◆ 93 T elephone Pr ogramming Instructions To enter data for Pr ogram 21-12 (ISDN Calling Party Number Setup for T runks): 1. Enter the programming mode. 2. 21 12 3. Enter the number of the item you want to program. 4. Select the trunk n ...

  • NEC ISDN-PRI - page 100

    Pr ogram 21 : Outgoing Call Setup 21-13 : ISDN Calling P ar ty Number Setup f or Extensions 94 ◆ Aspire ISDN PRI Manual 21-13 : ISDN Calling Party Number Setup for Extensions Description Use Program 21-13 : ISDN Calling P arty Number Setup for Extensions to assign each e xten- sion a Calling Party Number (maximum 16 digits per entry). The calling ...

  • NEC ISDN-PRI - page 101

    Pr ogram 21 : Outgoing Call Setup 21-13 : ISDN Calling P ar ty Number Setup f or Extensions Aspire ISDN PRI Manual ◆ 95 T elephone Pr ogramming Instructions To enter data for Pr ogram 21-13 (ISDN Calling Party Number Setup for Extensions): 1. Enter the programming mode. 2. 21 13 3. Enter the number of the item you want to program. 4. Select the t ...

  • NEC ISDN-PRI - page 102

    Pr ogram 21 : Outgoing Call Setup 21-15 : Individual T runk Group Routing f or Extensions 96 ◆ Aspire ISDN PRI Manual 21-15 : Individual Trunk Group Routing for Extensions Description Use Program 21-15 : Indi vidual T runk Group Route f or Extensions to designate the alternate trunk access route accessed when a user dials the Alternate T runk Rou ...

  • NEC ISDN-PRI - page 103

    Pr ogram 21 : Outgoing Call Setup 21-15 : Individual T runk Group Routing f or Extensions Aspire ISDN PRI Manual ◆ 97 T elephone Pr ogramming Instructions To enter data for Pr ogram 21-15 (Individual T runk Group Routing for Extensions): 1. Enter the programming mode. 2. 21 15 3. Enter the number of the item you want to program. 4. Select the tel ...

  • NEC ISDN-PRI - page 104

    Pr ogram 21 : Outgoing Call Setup 21-15 : Individual T runk Group Routing f or Extensions 98 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 105

    Pr ogram 22 : Incoming Call Setup 22-01 : System Options for Incoming Calls Aspire ISDN PRI Manual ◆ 99 Program 22 : Incoming Call Setup 22-01 : System Options for Incoming Calls Description Use Pr ogram 22-01 : System Options f or Incoming Calls to de fi ne the system options for incom- ing calls. Input Data Conditions None Feature Cr oss Refer ...

  • NEC ISDN-PRI - page 106

    Pr ogram 22 : Incoming Call Setup 22-01 : System Options for Incoming Calls 100 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-01 (System Options for Incoming Call Service): 1. Enter the programming mode. 2. 22 01 3. Enter the number of the item you want to program. 4. Enter data for the item you selec ...

  • NEC ISDN-PRI - page 107

    Pr ogram 22 : Incoming Call Setup 22-02 : Incoming Call T runk Setup Aspire ISDN PRI Manual ◆ 101 22-02 : Incoming Call Trunk Setup Description Use Program 22-02 : Incoming Call T runk Setup to assign the incoming trunk type for each trunk. There is one item for each Night Service Mode. Input Data Conditions (A.) When connecting to T1 trunks, aft ...

  • NEC ISDN-PRI - page 108

    Pr ogram 22 : Incoming Call Setup 22-02 : Incoming Call T runk Setup 102 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-02 (Incoming Service T ype Setup): 1. Enter the programming mode. 2. 22 02 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. 5. Ente ...

  • NEC ISDN-PRI - page 109

    Pr ogram 22 : Incoming Call Setup 22-03 : T runk Ring T one Rang e Aspire ISDN PRI Manual ◆ 103 22-03 : Trunk Ring T one Range Description Use Program 22-03 : T runk Ring T one Range to select the ring tone range for the trunk. The trunk uses a ring tone within the range selected when it rings an extension. There are four ring tones av ailable. C ...

  • NEC ISDN-PRI - page 110

    Pr ogram 22 : Incoming Call Setup 22-03 : T runk Ring T one Rang e 104 ◆ Aspire ISDN PRI Manual Feature Cr oss Reference ● Selectable Ring T ones T elephone Pr ogramming Instructions To enter data for Pr ogram 22-03 (T runk Ring T one Rang e): 1. Enter the programming mode. 2. 22 03 3. Enter the number of the item you want to program. 4. Select ...

  • NEC ISDN-PRI - page 111

    Pr ogram 22 : Incoming Call Setup 22-04 : Incoming Extension Ring Group Assignment Aspire ISDN PRI Manual ◆ 105 22-04 : Incoming Extension Ring Group Assignment Description Use Pr ogram 22-04 : Incoming Extension Ring Gr oup Assignment to assign e xtensions to Ring Groups. Calls ring extensions according to Ring Group programming. Use Program 22- ...

  • NEC ISDN-PRI - page 112

    Pr ogram 22 : Incoming Call Setup 22-04 : Incoming Extension Ring Group Assignment 106 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-04 (Incoming Extension Ring Group Assignment): 1. Enter the programming mode. 2. 22 04 3. Enter the number of the item you want to program. 4. Select the Incoming Ring G ...

  • NEC ISDN-PRI - page 113

    Pr ogram 22 : Incoming Call Setup 22-05 : Incoming T runk Ring Group Assignment Aspire ISDN PRI Manual ◆ 107 22-05 : Incoming Trunk Ring Group Assignment Description Use Program 22-05 : Incoming T runk Ring Group Assignment to assign trunks to incoming Ring Groups. Input Data Conditions None Feature Cr oss Reference ● Ring Groups Level: Aspire ...

  • NEC ISDN-PRI - page 114

    Pr ogram 22 : Incoming Call Setup 22-05 : Incoming T runk Ring Group Assignment 108 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-05 (Incoming T runk Ring Group Assignment): 1. Enter the programming mode. 2. 22 05 3. Enter the number of the item you want to program. 4. Select the trunk number to be pr ...

  • NEC ISDN-PRI - page 115

    Pr ogram 22 : Incoming Call Setup 22-06 : Normal Incoming Ring Mode Aspire ISDN PRI Manual ◆ 109 22-06 : Normal Incoming Ring Mode Description Use Pr ogram 22-06 : Normal Incoming Ring Mode to de fi ne whether or not an extension should ring for the Normal Incoming Ring Mode. Input Data Conditions None Feature Cr oss Reference ● Central Of fi ...

  • NEC ISDN-PRI - page 116

    Pr ogram 22 : Incoming Call Setup 22-06 : Normal Incoming Ring Mode 110 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-06 (Normal Incoming Ring Mode): 1. Enter the programming mode. 2. 22 06 3. Enter the number of the item you want to program. 4. Select the telephone number to be programmed by pressing ...

  • NEC ISDN-PRI - page 117

    Pr ogram 22 : Incoming Call Setup 22-08 : DIL/IRG No Answer Destination Aspire ISDN PRI Manual ◆ 111 22-08 : DIL/IRG No Answer Destination Description For DIL Delayed Ringing, use Pr ogram 22-08 : DIL/IRG No Answer Destination to assign the DIL No Answer Ring Group. An unanswered DIL rings this group after the DIL No Answer T ime expires (Program ...

  • NEC ISDN-PRI - page 118

    Pr ogram 22 : Incoming Call Setup 22-08 : DIL/IRG No Answer Destination 112 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 22-08 (DIL/IRG No Answer Destination): 1. Enter the programming mode. 2. 22 08 3. Enter the number of the item you want to program. 4. Select the trunk number to be programmed by pres ...

  • NEC ISDN-PRI - page 119

    Pr ogram 22 : Incoming Call Setup 22-11 : DID T ranslation Number Con version Aspire ISDN PRI Manual ◆ 113 22-11 : DID Translation Number Conversion Description Use Program 22-11 : DID T ranslation T able Number Con version to specify for each T ranslation T able entry (2000): ● The digits recei ved by the system (eight max.) ● The extension ...

  • NEC ISDN-PRI - page 120

    Pr ogram 22 : Incoming Call Setup 22-11 : DID T ranslation Number Con version 114 ◆ Aspire ISDN PRI Manual Input Data Conditions None Con v ersion T able Number 1-2000 Item No. Item Input Data Default 01 Receiv ed Number Max. 8 digits No setting 02 T arget Number Max. 24 digits No setting 03 DID Name Max. 12 characters No setting 04 T ransfer Ope ...

  • NEC ISDN-PRI - page 121

    Pr ogram 22 : Incoming Call Setup 22-11 : DID T ranslation Number Con version Aspire ISDN PRI Manual ◆ 115 Feature Cr oss Reference ● Direct Inward Dialing (DID) T elephone Pr ogramming Instructions To enter data for Pr ogram 22-11 (DID T ranslation Number Conver sion): 1. Enter the programming mode. 2. 22 11 3. Enter the number of the item you ...

  • NEC ISDN-PRI - page 122

    Pr ogram 22 : Incoming Call Setup 22-11 : DID T ranslation Number Con version 116 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 123

    Pr ogram 35 : SMDR Options 35-02 : SMDR Output Options Aspire ISDN PRI Manual ◆ 117 Program 35 : SMDR Options 35-02 : SMDR Output Options Description Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Record- ing) output options for each of the 8 SMDR ports. Refer to the follo wing chart for a description of each opti ...

  • NEC ISDN-PRI - page 124

    Pr ogram 35 : SMDR Options 35-02 : SMDR Output Options 118 ◆ Aspire ISDN PRI Manual T elephone Pr ogramming Instructions To enter data for Pr ogram 35-02 (SMDR Output Options): 1. Enter the programming mode. 2. 35 02 3. Enter the number of the item you want to program. 4. Select the SMDR port number to be programmed by pressing the FLASH or the V ...

  • NEC ISDN-PRI - page 125

    Pr ogram 81 : Basic Hard ware Setup f or T runk 81-01 : COIU Initial Data Setup Aspire ISDN PRI Manual ◆ 119 Program 81 : Basic Hardware Setup for Trunk 81-01 : COIU Initial Data Setup Description Use Pr ogram 81-01 : COIU Initial Data Setup to de fi ne the v arious basic timers for COIU PCBs. Input Data Level: Aspire S Aspire MF •A v ailable. ...

  • NEC ISDN-PRI - page 126

    Pr ogram 81 : Basic Hard ware Setup f or T runk 81-01 : COIU Initial Data Setup 120 ◆ Aspire ISDN PRI Manual Conditions None Feature Cr oss Reference ● Central Of fi ce Calls, Placing 22 Loop Disconnect Detect Minimum T ime 1-255 (8-2040mS) 50 (400ms) 23 Loop Disconnect Detect Maximum T ime 1-255 (8-2040mS) 80 (640ms) 24 On Hook Normal Detect ...

  • NEC ISDN-PRI - page 127

    Pr ogram 81 : Basic Hard ware Setup f or T runk 81-01 : COIU Initial Data Setup Aspire ISDN PRI Manual ◆ 121 T elephone Pr ogramming Instructions To enter data for Pr ogram 81-01 ( COIU Initial Data Setup): 1. Enter the programming mode. 2. 81 01 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. ...

  • NEC ISDN-PRI - page 128

    Pr ogram 81 : Basic Hard ware Setup f or T runk 81-01 : COIU Initial Data Setup 122 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 129

    Pr ogram 82 : Basic Hard ware Setup f or Extension 82-01 : Incoming Ring T one Aspire ISDN PRI Manual ◆ 123 Program 82 : Basic Hardware Setup for Extension 82-01 : Incoming Ring Tone Description Use Program 82-01 : Incoming Ring T one to set the incoming ring tones, which are the tones a user hears when a call rings an extension. These tones are ...

  • NEC ISDN-PRI - page 130

    Pr ogram 82 : Basic Hard ware Setup f or Extension 82-01 : Incoming Ring T one 124 ◆ Aspire ISDN PRI Manual Default Conditions None Feature Cr oss Reference ● Distincti ve Ringing T ones and Flash Patterns ● Selectable Ring T ones Incoming Ringing T one Number T one T ype Frequency 1 Frequency 2 Modulation Pattern 1 (T runk Incoming) High Mid ...

  • NEC ISDN-PRI - page 131

    Pr ogram 82 : Basic Hard ware Setup f or Extension 82-01 : Incoming Ring T one Aspire ISDN PRI Manual ◆ 125 T elephone Pr ogramming Instructions To enter data for Pr ogram 82-01 (Incoming Ring T one): 1. Enter the programming mode. 2. 82 01 3. Enter the number of the item you want to program. 4. Enter data for the item you selected + HOLD. 5. Ent ...

  • NEC ISDN-PRI - page 132

    Pr ogram 82 : Basic Hard ware Setup f or Extension 82-01 : Incoming Ring T one 126 ◆ Aspire ISDN PRI Manual - For Y our Notes - ...

  • NEC ISDN-PRI - page 133

    NEC Unified Solutions, Inc. 4 Forest Parkway , Shelton, CT 06484 T el: 800-365-1928 Fax: 203-926-5458 www .necunifiedsolutions.com Other Important T elephone Numbers Sales: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203-926-5450 Customer Service: . . . . . . . . . . . . . . . . . . . . . . . . . . .203-926-5444 Customer ...

  • NEC ISDN-PRI - page 134

    0893212 July 1, 2004 Printed in U.S .A. NEC Uni fi ed Solutions, Inc. 4 F orest Parkwa y , Shelton, CT 06484 TEL: 203-926-5400 F AX: 203-929-0535 www .necuni fi edsolutions.com ...

Manufacturer NEC Category Printer Accessories

Documents that we receive from a manufacturer of a NEC ISDN-PRI can be divided into several groups. They are, among others:
- NEC technical drawings
- ISDN-PRI manuals
- NEC product data sheets
- information booklets
- or energy labels NEC ISDN-PRI
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC ISDN-PRI.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC ISDN-PRI, service manual, brief instructions and user manuals NEC ISDN-PRI. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC ISDN-PRI.

Similar manuals

A complete manual for the device NEC ISDN-PRI, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC ISDN-PRI by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC ISDN-PRI.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC ISDN-PRI - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC ISDN-PRI, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC ISDN-PRI, that we can find in the current document
3. Tips how to use the basic functions of the device NEC ISDN-PRI - which should help us in our first steps of using NEC ISDN-PRI
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC ISDN-PRI
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC ISDN-PRI in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC ISDN-PRI?

Use the form below

If you did not solve your problem by using a manual NEC ISDN-PRI, ask a question using the form below. If a user had a similar problem with NEC ISDN-PRI it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)