Manual Fujitsu PG-28XX

88 pages 1.32 mb
Download

Go to site of 88

Summary
  • Fujitsu PG-28XX - page 1

    J E LAN ドライバ V11.2 取扱説明書 LAN Driver V11.2 User’s Guide ( Onboard/PG-18XX/PG-28XX/PG-LND10X ) B7FY-1931-01 ...

  • Fujitsu PG-28XX - page 2

    2 はじめに このたびは、弊社の LAN カードをお 買い上げいただき、誠にあ りがとうございます。 本製品は、 PC サーバ「 PRIMERGY 」の PCI スロ ットに搭載し、 LAN ( Local Area Network )システムの構築に使用できます 。 本書は、 LAN カード、 LAN ドライバ( Windows Ser ...

  • Fujitsu PG-28XX - page 3

          3 J 本書の表記 ■ 警告表示 本書ではいろいろな絵表示を 使っています。これは装 置を安全に正しくお使いいただき 、 あなたや他の人々に加えられ るおそれのある危害や損 害を未然に防止するための目印と な るものです。その表示と意味 は次の ...

  • Fujitsu PG-28XX - page 4

    4 ■ コマンド入力(キー入力) CD-ROM ドライブのドライブ名を、 [ CD-ROM ドライブ]で表記して います。入力の際 は、お使いの環境に合わせて、ド ライブ名を入力してくださ い。 [CD-ROMドライブ]:Set up.exe ■ 製品の呼び方 本文中の製品名称を次のように略 し? ...

  • Fujitsu PG-28XX - page 5

          5 J 安全上のご注意 本製品を安全にお使いいただ くために、以降の記述内 容を必ずお守りください。 警告 注意 梱包物の確認 お使いになる前に、次のもの が梱包されていることを お確かめください。 万一足りないものがございま したら、担当営? ...

  • Fujitsu PG-28XX - page 6

    6 目次 1 LAN ドライバについて . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 LAN ドライバの概要 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 モジュールのバージョンレベル . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Windows Server 2003 対? ...

  • Fujitsu PG-28XX - page 7

       1   LAN ドライバについ て   7 J 1 LAN ドライバについて この章では、 LAN ドライバについて説明しています。 1.1 LAN ドライバの概要 本ドライバは、インテル社製 Fast Ethernet カード/ Gigabit Ethernet カード、および本体装 置のオンボード LAN (→「 8 LAN カー? ...

  • Fujitsu PG-28XX - page 8

    8 1.2 モジュールのバージョンレベル 本ドライバのモジュールのバ ージョンレベルは、次の とおりです。 確認する LAN アダプタは、 Fast Ethernet ( 100BA SE-TX ) 、 Gigabit Ethernet ( 1000BASE-T/ 1000BASE-SX ) 、仮想アダプタ( AFT や VLAN など)があります。 ・ W indows Server ...

  • Fujitsu PG-28XX - page 9

       1   LAN ドライバについ て   9 J ■ バージョンレベルの確認方法 バージョンレベルの確認は、デバ イスマネージャで行います 。詳細は、次のとおりです。 1 「コンピュータの管理」を起動します。 ・ W indows Server 2003 の場合 「スタート」ボタン→「管? ...

  • Fujitsu PG-28XX - page 10

    10 2 Windows Server 2003 対応 LAN ドライバ この章では、 Windows Server 2003 対応 LAN ドライバについて説明しています。 ■ BX620S2/BX620S3 にインストールする場合の注意事項 BX620S2/BX 620S3 で Wi ndows Server 2 003 x64 の場合、本ドライバは、 「 3.1 ドライバの更 新」 (→ P. 1 4 )? ...

  • Fujitsu PG-28XX - page 11

       2   Windows Server 2003 対応 LAN ドライバ   11 J ・ Intel 82543GC-b ased ***** ・ イーサーネットコントローラ すべての LAN アダプタに対して、以降の 手順 6 ~ 10 を行います。 6 LAN アダプタのアイコンをダブルクリックします。 プロパティが表示されます。 7 [ド ...

  • Fujitsu PG-28XX - page 12

    12 2.2 カードの追加 OS インストール直後や、新しく LAN カー ドを導入した直後のシステ ム起動時に、 「新し いハードウェア検出」ダイア ログが表示される場合が ありますが、ドライバは自動でイ ン ストールされます。 ただし、本ドライバ以外がイ ンストー ...

  • Fujitsu PG-28XX - page 13

       2   Windows Server 2003 対応 LAN ドライバ   13 J 2.4 表示される LAN カードの名称 「デバイス マネージャ」で表 示される LAN カードの名称は、次のとおりです 。 LAN カード 名称 PG-1851 Intel(R) PRO/10 0 Server Adapter PG-1852 Intel(R) PRO/10 00 MT Desktop Adap ter PG-1861 Intel(R) PRO/1 ...

  • Fujitsu PG-28XX - page 14

    14 3 Windows 2000 Server 対応 LAN ドライバ この章では、 W indows 2000 Server 対応 LAN ドライバについて説明しています。 3.1 ドライバの更新 ドライバの更新は、次の手順 で行います。 ` 「コントロールパネル」に「 Intel ® PROSet Ⅱ」 、 「 Intel ® PROSet 」 、 「有線用 イン ...

  • Fujitsu PG-28XX - page 15

       3   Windows 2000 Server 対応 LAN ドラ イバ   15 J 6 LAN アダプタのアイコンをダブルクリックします。 プロパティが表示されます。 7 [ドライバ]タブをクリックし、 [ドライバの更新]をクリックします。 「デバイスドライバのアップ グレードウィザード? ...

  • Fujitsu PG-28XX - page 16

    16 3.2 カードの追加 OS インストール直後や、新しく LAN カー ドを導入した直後のシステ ム起動時に、次の画 面が表示される場合がありま す。次のように対処して ください。 ・ 「新しいハードウェアが見 つかりました」のメッセー ジが表示された場合 OS が新 ...

  • Fujitsu PG-28XX - page 17

       3   Windows 2000 Server 対応 LAN ドラ イバ   17 J 3.3 ドライバの削除 ドライバを削除する場合は、次の 手順で行います。 1 管理者権限でログオンします。 2 「スタート」ボタン→「設定」→「コントロールパネル」→「アプリケー ションの追加と削除」の順? ...

  • Fujitsu PG-28XX - page 18

    18 4 Intel ® PROSet この章では、 Intel ® PROSet について説明しています。 4.1 Intel ® PROSet について 「 Intel ® PROSet 」を使用すると、 LA N カード/ドライバの詳細 な設定ができます。デュプ レックスモード/チーム化/ VL AN の設定や LAN カードの診断を行う 場合は、 ...

  • Fujitsu PG-28XX - page 19

       4   Intel® PROSet    19 J 4.2 インストール Intel ® PROSet のインスト ールは、次の手順で行います。 1. すでにチームや VLAN が構成されている場合、それを削除してください。 2. 「 Intel ® PRO Set Ⅱ」 、 「 Intel ® PROSet 」または「有線用インテル ® PROSet 」が「? ...

  • Fujitsu PG-28XX - page 20

    20 Intel ® PROSet の設定情報の詳細については、 「 Intel ® PROSet 」の画面下に表示され ている 説明文(黄色い枠内)をご覧 ください。 また、説明文の中に青い文字 で表記されているものはク リックするとさらに詳細な説明 が表示されます。 - 「 Intel ® PROSet 」? ...

  • Fujitsu PG-28XX - page 21

       4   Intel® PROSet    21 J 4.3 アンインストール Intel ® PROSet をアンイン ストールする場合は、次の手順 で行います。 1 管理者権限でログオンします。 2 「アプリケーションの追加と削除」または「プログラムの追加と削除」を 起動します。 ・ W indows Server 2 ...

  • Fujitsu PG-28XX - page 22

    22 4.4 LAN カードのテスト ■ テスト方法 1 管理者権限でログオンします。 2 デバイスマネージャーで使用する LAN アダプタをダブルクリックし、 Intel ® PROSet を起動します。 →「■ Intel® PROSet の起動 方法」 ( P. 1 8 ) 3 [リンク速度]タブをクリックします。 4 ...

  • Fujitsu PG-28XX - page 23

       5  チーム化 ( AFT/ALB/SFT/ 静的リンク)    23 J 5 チーム化 ( AFT/ALB/SF T/ 静的リンク) この章では、チーム化( AFT/ALB/SFT/ 静的リンク)について説明しています。 5.1 チーム化 ( AFT/ALB/SF T/ 静的リンク)について ■ AFT/A LB AFT (アダプタ フォルト トレラ? ...

  • Fujitsu PG-28XX - page 24

    24 * ) LAN ポートとスイッチ間のリンク断と 同等の異常のみ検出しま す。したがって、ス イッチが部分的に故障しても、 LAN ポートが接続され ているポートがリンクレベルで 正常な場合は、経路の切り替え は発生しません。 ■ 静的リンク 静的リンク アグリ? ...

  • Fujitsu PG-28XX - page 25

       5  チーム化 ( AFT/ALB/SFT/ 静的リンク)    25 J ・ チーム化使用時は、 Windows Load Balan cing Service ( WL BS )や NLB ( Network Load Balan cing )を使用することはでき ません。 ・ PG-18 52 ではチームを構成できません。 ・ 静的リンク使用時は、リンクアグリ ゲー? ...

  • Fujitsu PG-28XX - page 26

    26 5.2 チームの作成 チームを作成する場合は、次 の手順で行います。 1 管理者権限でログオンします。 2 デバイスマネージャでチームを作成する LAN アダプタをダブルクリック し、 Intel ® PROSet を起動します。 →「■ Intel® PROSet の起動 方法」 ( P. 1 8 ) 3 [チ ...

  • Fujitsu PG-28XX - page 27

       5  チーム化 ( AFT/ALB/SFT/ 静的リンク)    27 J 9 [ OK ]をクリックして、チームのプロパティ画面を閉じます。 LAN アダプタのプロパ ティ画面が表示されます。 ただし、 「このチーム には、インテル以外のアダ プタが含まれているのでジャンボ フレ? ...

  • Fujitsu PG-28XX - page 28

    28 5.3 チームの削除 チームを削除する場合は、次 の手順で行います。 1 管理者権限でログオンします。 2 デバイスマネージャでチームを削除する仮想アダプタをダブルクリック し、 Intel ® PROSet を起動します。 →「■ Intel® PROSet の起動 方法」 ( P. 1 8 ) 削除? ...

  • Fujitsu PG-28XX - page 29

       5  チーム化 ( AFT/ALB/SFT/ 静的リンク)    29 J 5.4 イベントログ AFT / ALB / SFT /静的リンク使用時は、次のイベント ログが発生します(ソース: i ANSMiniport ) 。 ■ 注意事項 ・ チーム化が正しく動作を開始 した場合でも、システム 起動時に、 ID = 6 ...

  • Fujitsu PG-28XX - page 30

    30 ・ チーム化を構成すると、シス テム起動時にイベントビュ ーアのシステムログに ID = 11 、 13 、 22 の警告ログと ID = 15 などのイベントログが複 数格納される場合がありま すが、 問題ありませんので無視して ください。 LA N アダプタの「詳細設定」で「 ...

  • Fujitsu PG-28XX - page 31

       6   VLAN    31 J 6 VLAN この章では、 VLAN について説明しています。 6.1 VLAN について バーチャル LAN ( VLAN )とは、 LAN に接続される装置を、物理的な接 続形態ではなく論 理的にグループ化したものです。 VLAN は、装置が使用 できるネットワークセグメン? ...

  • Fujitsu PG-28XX - page 32

    32 ・ W indows Server 2003/W indows 2000 Server で、 NetBIOS over TCP/IP が有効な VLAN は、 システム全体で最大 4 本にしてくだ さい。 6.2 VLAN の作成 VLAN を作成する場合は、次の手順で行います。 1 LAN ポートを接続するスイッチのポートを、 VLAN のタグフレームを送 受信でき? ...

  • Fujitsu PG-28XX - page 33

       6   VLAN    33 J 6.3 VLAN の削除 VLAN を削除する場合は、次の 手順で行います。 1 管理者権限でログオンします。 2 デバイスマネージャで VLAN を削除する仮想アダプタをダブルクリック し、 Intel ® PROSet を起動します。 →「■ Intel® PROSet の起動方法」 ( P. ...

  • Fujitsu PG-28XX - page 34

    34 7 カードをネットワークに接続できな い場合の解決方法 この章では、 LAN カードをネットワークに接続できない場合について説明してい ます。 LAN カードが正常な場合は、 LED の状態は表の とおりです。 LED が点灯、点滅しないときは、次のこと が考えられ? ...

  • Fujitsu PG-28XX - page 35

       7  カードをネットワークに接続できな い場合の解決方法   35 J ・ PG-1892(L) / 289(L) の場合 -A C T / L N K L E D が 点灯/点滅しない場合 ・ ドライバがインストールされて いるかを確認してください 。 ・ スイッチ、ハブとの接続を確認 してください。 ・ ? ...

  • Fujitsu PG-28XX - page 36

    36 8 LAN カードの仕様 この章では、本ドライバを添付する LAN カードの仕様を説明します。 型名 PG-1862 PG- 1882(L) PG- 1892(L) PG-286 PG- 2861(L) PG- 289(L) 規格 IEEE802.3u ( 100BASE-TX )● - ● ● ● ● IEEE802.3z ( 1000BASE-SX )- ● - - - - IEEE802.3ab ( 1000BASE-T )● - ● ● ...

  • Fujitsu PG-28XX - page 37

      付録 A     37 J 付録 A A. 1 ローカルアドレスの設定 ローカルアドレスを設定する場合 は、次の手順で行います。 1 管理者権限でログオンします。 2 デバイスマネージャーで使用する LAN アダプタをダブルクリックし、 Intel ® PROSet を起動します。 →「■ I ...

  • Fujitsu PG-28XX - page 38

    38 3 [リンク速度]タブをクリックします。 4 「速度とデュプレックス設定」で使用する通信速度とデュプレックスモー ドを設定します。 5 [ OK ]をクリックします。 6 システムを再起動します。 ` 固定的に全二重モードに設定する場合は、 必ず LAN カードと? ...

  • Fujitsu PG-28XX - page 39

      付録 A     39 J A. 3 ジャンボフレームについて Gigabit Ethernet では、ジャンボフレームが使用できます 。ジャンボフレームを使用 する際 は、ジャンボフレームネットワー ク内の機器は、すべてジャ ンボフレーム対応装置で構成 し、ジャンボフレームを有 ...

  • Fujitsu PG-28XX - page 40

    40 A. 4 LAN カードの筐体外部からの特定について LAN カードがシステムに複数搭載され ていても、 「 Intel ® PROSet 」の LAN カードの LED を点滅させる機能を利用して 、特定の MAC アドレスを持つ LAN カードを 本体装置外部か ら容易に判別できます。 判別方法は、? ...

  • Fujitsu PG-28XX - page 41

      付録 A     41 J A. 5 チーム化を構成するカードの交換手順について チーム化を構成している LAN カードを交 換する場合は、次の手順で 行います。 1 システムの電源を切断後、 LAN カードを交換します。 2 システムを再起動します。 3 管理者権限でログオ? ...

  • Fujitsu PG-28XX - page 42

    42 A. 6 BX620S2/BX620S3 へのインストール手順につ いて BX620S2/BX 620S3 で W indows Server 2003 x64 の場合、本ドライバは、 「 3.1 ドライバの更 新」 (→ P. 1 4 ) または「 3.2 カードの追加」 (→ P. 1 6 )の手順では、イン ストールされませ ん。次の手順でインストール し? ...

  • Fujitsu PG-28XX - page 43

      付録 A     43 J ・ イーサーネットコントローラ すべての LAN アダプタに対して、以降の 手順 6 ~ 14 を行います。 6 LAN アダプタのアイコンをダブルクリックします。 プロパティが表示されます。 7 [ドライバ]タブをクリックし、 [ドライバの更新]? ...

  • Fujitsu PG-28XX - page 44

    44 ...

  • Fujitsu PG-28XX - page 45

    45 E Before Reading This Manual Thank you for purchasin g the PRIMERGY LAN card. The card can be installed to the PCI slot of th e PC server "PRIMERGY" to configure Local Area Network (LAN) system. This manual explains LAN cards an d the LAN driver (for W indows Server 2003 and W indows 200 0 Server). Read this manual carefully to handle ...

  • Fujitsu PG-28XX - page 46

    46 Remarks W arning Descriptions V arious symbols are used throughout this manual. These are provided to emphasize important points for your safety and that of others . The symbols a nd their meanings are as fo llows. Be sure to fully understand these before reading this manua l. The following symbols are used to indicate the type of warning or cau ...

  • Fujitsu PG-28XX - page 47

    47 E Abbreviations The following expressions and abbr evia tions are used to describe the product names used in this manual. Safety For your safety and that of others, f ollow the guidelines provided on the following pag es concerning the use of this product. W ARNING CAUTION Product names Expressions and abbreviations Microsoft ® W indows Server ...

  • Fujitsu PG-28XX - page 48

    48 Check the items supplied Before usin g the produ ct, check that no supplied or attached items are missing. If any items are missing, contact an office listed in "Appendix B Contact Informat ion" ( J pg.85). • LAN Card • Driver CD • LAN Driver V1 1.2 U ser ’s Guide (this manual) Intel is a registered t rademark of Intel Corporat ...

  • Fujitsu PG-28XX - page 49

    49 E Contents 1 LAN Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 1.1 LAN Driver Overvie w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 1.2 Module V ersion Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 2 Windows Server 2003 LAN Driver . . ...

  • Fujitsu PG-28XX - page 50

    50 1 LAN Driver This chapter ex plains LAN drive r . 1.1 LAN Driver Overview This driver can be used for Intel Fast Ethernet card/Gigabit Ethernet card, and the onboard LAN for this server ( J "8 LAN Card Specif ications"(pg.77)). Available O S This driver is avail abl e for the following OSes. • Windows Server 2003 J "2 W indo ws ...

  • Fujitsu PG-28XX - page 51

    1 LAN Driver 51 E 1.2 Module V ersion Level The module version levels of the driver are as follows. LAN adapters include Fast Ethe rnet (100BASE -TX), Gigabit Ethernet (1000BASE-T /1000BASE- SX), and virtual adapter (AFT , V LAN, etc.). • F or W indo ws Server 2003 IA32 • F or W indows Ser ver 2003 x64 • Windows Server 200 3 IA64 • For Wind ...

  • Fujitsu PG-28XX - page 52

    52 How to check version level T o check the version level , use Device Manager . Details are as follows. 1 Start the [Computer Management]. • For W indows Server 2003 Click [Start] → [Administrative T ools] → [Computer Management]. • For W indows 2000 Server Click [Start] → [Programs] → [ Administrative T ools] → [Computer Manag ement ...

  • Fujitsu PG-28XX - page 53

    2 Windows Server 2003 LAN Driver 53 E 2 Windows Server 2003 LAN Driver This chapter explains Windows Server 2003 L AN driver . Cautions for in stalling in BX620S2/BX620 S3 When using BX620S2/BX620S3 with W indows Server 200 3 x64, this driver cannot be installed with the procedure s in "3.1 Updating the Driver" ( J pg.57) or "3.2 Add ...

  • Fujitsu PG-28XX - page 54

    54 6 Double-click LAN adapter icon. "Properties" appears. 7 Click the [Driver] tab and cli ck [Update Driver]. The [Hardware Update Wizard] window appears. When the [Can Windows connect to windows Update to sear ch for softw are?] message appears, select [No, not th is time] and click [Next]. 8 Select [Install the software au tomatically ...

  • Fujitsu PG-28XX - page 55

    2 Windows Server 2003 LAN Driver 55 E 2.2 Adding a Card When the system is started right after OS installation or new L AN card installation, the [Found NEW Hardware] window may appear . The driv er will be automatically installed. However , when other d river than this driver is installed, refe r to "2.1 Updating the Driver" ( J pg.5 3) ...

  • Fujitsu PG-28XX - page 56

    56 2.4 Displayed LAN Ca rd Names LAN card names displayed in [Device Manager] are as follows. LAN Card LAN device name PG-1851 Intel(R) PRO/100 Server Adapter PG-1852 Intel(R) PRO/1000 MT Desktop Adapter PG-1861 Intel(R) PRO /100 S Dual Port Server Adapter PG-1862 Intel(R) PRO /1000 MT Dual Port Server Adapte r PG-1871(L) Intel(R) PRO/100 S Server ...

  • Fujitsu PG-28XX - page 57

    3 Windows 2000 Server LAN Driver 57 E 3 Windows 2000 Server LAN Driver This chapter explains Windows 2000 Server L AN driver . 3.1 Updating the Driver Perform the fo llowing procedures to updat e the driver . ` If "Intel ® PROSet II", "Intel ® PROSet" or "Intel ® PROSet Wired" is displa yed in the [Con trol Panel], ...

  • Fujitsu PG-28XX - page 58

    58 6 Double-click the icon of LAN adapter . Proper ties ap pears. 7 Click the [Driver] tab and cli ck [Update Driver]. The [W elcome to the Upgrade Device Driver Wizard] window appears. 8 Click [Next]. The [Install Hardware Device Drivers] window appears. 9 Select [Search for a suitable driver for my device] and click [Next]. 10 Check the [CD-ROM d ...

  • Fujitsu PG-28XX - page 59

    3 Windows 2000 Server LAN Driver 59 E 3.2 Adding a Card When the system is started right afte r OS installation or new LAN card installation, the following window may appear . Follow the instructions below . • When the [Found New Hardware] message app ears: When an OS-installed LAN card driver is newly added automatically , [Insert Disk] dialog b ...

  • Fujitsu PG-28XX - page 60

    60 4 Intel ® PROSet This chapter ex plains Intel ® PROSet. 4.1 Intel ® PROSet Detailed settings of LAN card/dri ver are availa ble using "Intel ® PROSet". T o operate Duplex mode/ T eaming/ V LAN setting or LAN card diagnosis, use [Intel ® PROSet]. [Intel ® PROSet] can be started from [Contro l Pane l] in the system. How to Start In ...

  • Fujitsu PG-28XX - page 61

    4 Intel® PROSet 61 E 4.2 Installing Perform the followi ng procedures to install Intel ® PROSet. 1. If team or VL AN is alre ady config ured, delet e it. 2. If "Intel ® PROSet II", "Intel ® PROSet ", or "Intel ® PROSet Wired" is di splayed in the [Control Panel ], an old version of Int el ® PROSet is ins talled. ...

  • Fujitsu PG-28XX - page 62

    62 For details on the settings of Intel ® PRO Set, see the explanation displayed at the bottom of the "Intel ® PROSet" screen (in the yellow frame). Clicking blue letters in the explanation displays the further detailed information. - Do not set a small value in [Receive De scriptors] in [Advanced] of "Intel ® PROSet ". - Whe ...

  • Fujitsu PG-28XX - page 63

    4 Intel® PROSet 63 E 4.3 Uninstalling Perform the followi ng procedures to uninstall Intel ® PROSe t. 1 Log on with administrator privileges. 2 Start [Add or Remove Programs] or [Add/Remove Programs]. • For Windows Server 2003 Click [Start] → [Control Panel] → [Add or Remove Programs]. • For Windows 2000 Serv er Click [Start] → [Setting ...

  • Fujitsu PG-28XX - page 64

    64 4.4 LAN Card T est T est method 1 Log on with administrator privileges. 2 Double click the LAN adapter to be used by Device M anager and start Intel ® PROSe t. J " How to Start Intel® PROSet"(pg.60) 3 Click the [Link Spee d] tab. 4 Click [ Diagno sis]. 5 Select tabs to diagnose and c lick [Run T est] to test the LAN adapter . Actions ...

  • Fujitsu PG-28XX - page 65

    5 T eaming (AFT/ALB/SFT/S tatic Link Aggregation) 65 E 5 T eaming (AF T/ALB/SF T/Static Link Aggregation) This chapter explains T eaming (AF T/ALB/SFT/S t atic Link Aggrega tion). 5.1 T eaming (AFT/ALB/S F T/Static Link Aggregation) AFT/A LB Adapter Fault T olerance (AFT) is a techn ology of redundant paths between the server and switch (hub) using ...

  • Fujitsu PG-28XX - page 66

    66 Static Link Aggregation Static Link Aggregation is, in addition to the AFT redundant function, a function to enhance throughput by adding LAN port to a team. It contin uously analyzes the tran smission load of each team member and the switch loa d adju st incoming traffic. It is necess ary for all adapter s to operate at the same speed and f or ...

  • Fujitsu PG-28XX - page 67

    5 T eaming (AFT/ALB/SFT/S tatic Link Aggregation) 67 E • W hen AFT/ALB/Static Link Agg regation is used, sp anning tr ee function of the port connected to the switch must be disabled. • When adding/removing a LAN card to/from a team in S tatic Link Aggregation, it must be operat ed while the link is down. • For Static Link Aggregation, all ad ...

  • Fujitsu PG-28XX - page 68

    68 5.2 Creating T eam Perform the following pro cedur es to create a team. 1 Log on with administrator privileges. 2 Double-click LAN adapters to create a team using device manager , and start Intel ® PROSet. J " How to Start Intel® PROSet"(pg.60) 3 Click the [teaming] tab. 4 Select [team with other adapters] and, click [New T eam]. The ...

  • Fujitsu PG-28XX - page 69

    5 T eaming (AFT/ALB/SFT/S tatic Link Aggregation) 69 E 10 Click [OK] to close the proper ty win dow of the LAN adapter . 11 Restart the system. Check the version level of the driv er version of the created team (virtual adapter) referring to "1.2 Module V ersion Level" ( J pg.51). When teaming setting is completed, the following virtua l ...

  • Fujitsu PG-28XX - page 70

    70 5.3 Removing a T eam Perform the following proced ures to remove a team. 1 Log on with administrator privileges. 2 Double-click virtual adapters to remove a team using device man- ager , and start Intel ® PROSet. J " How to Start Intel® PROSet"(pg.60) The virtual adapter of th e team to remove opens. 3 Click the [Settings] tab. 4 Cli ...

  • Fujitsu PG-28XX - page 71

    5 T eaming (AFT/ALB/SFT/S tatic Link Aggregation) 71 E 5.4 Event Log When using AFT/ALB/SFT/static link aggregation, the following ev ent logs appear (Source: i ANSMiniport). Notes • Even when the teaming operation is started correctly , ID=6, 7, 8 event logs ar e stored at the system boot. These can be ignored a s they are not a problem. • Whe ...

  • Fujitsu PG-28XX - page 72

    72 6 VLAN This chapter ex plains VLAN. 6.1 VLAN V irtual L AN (VLAN) is not a physical connection but a log ically grouped device connected to LAN. VLAN can specify network segments that the devi ce can use. It can enhance network performance and security . VLAN also has a function to logically grou p multiple users and devices, enabling network ma ...

  • Fujitsu PG-28XX - page 73

    6 VL AN 73 E 6.2 Creating VLAN Perform the followi ng procedures to create a VLAN. 1 Set the port of the switch connec ted to the LAN port to enable send/receive of VLAN tag frames. 2 Log on with administrator privileges. 3 Double-click the LAN adapter to configure VLAN using device manager , and start Intel ® PROSet . J " How to Start Intel? ...

  • Fujitsu PG-28XX - page 74

    74 6.3 Removing VLAN Perform the following proced ures to remove VL AN. 1 Log on with administrator privileges. 2 Double-click the virtual adapter to remove VLAN using device manager , and start Inte l ® PROSet. J " How to Start Intel® PROSet"(pg.60) The virtual adapter of th e team to remove opens. 3 Click the [Settings] tab. 4 Click [ ...

  • Fujitsu PG-28XX - page 75

    7 Solutions When the Card Cannot be Conn ected to Network 75 E 7 Solutions When the Card Cannot be Connected to Network This chapter explains cases when the LAN card can not be connected to the network. When the LAN card is operating normally the LED status is described in the table . If the LED does not light up or blink it may be du e to one of t ...

  • Fujitsu PG-28XX - page 76

    76 • For PG-1892(L)/PG-289(L) - When ACT/LNK L ED does not light/blink. • Check that the dr iver is installed. • Check the connection with switch and hub. • Use another port of switch and hub. • Network may be in the status of inactiv e transmission. Tr y to log in from the other line. • For PG-2861 (L) - When ACT/LNK A/B LED does not l ...

  • Fujitsu PG-28XX - page 77

    8 LAN Card Specifi cations 77 E 8 LAN Card Specifications This chapter explain s specifications of the LAN card that accompanies with this driver . Model PG-1862 PG-1 882(L) PG-1892(L) PG-286 PG-2861(L) PG-289(L) Specification IEEE802.3u (100BASE-TX) OK - OK OK OK OK IEEE802.3z (1000BASE-SX) - OK - - - - IEEE802.3ab (1000BASE-T) OK - OK OK OK OK IE ...

  • Fujitsu PG-28XX - page 78

    78 ...

  • Fujitsu PG-28XX - page 79

    Appendix A 79 E Appendix A A. 1 Setting Local Address Perform the following procedur es to set a local address. 1 Log on with administrator privileges. 2 Double click the LAN adapter to be used by Device Manager and start Intel ® PROSet. J " How to Start Intel® PROSet"(pg.60) 3 Click the [Advanced] tab. 4 Specify a local address to set ...

  • Fujitsu PG-28XX - page 80

    80 3 Click the [Link Speed] tab. 4 Set the transmission speed and dupl ex m o de t o u se i n [ S p ee d a n d Duplex Settings]. 5 Click [OK]. 6 Restart the system. ` T o fix full-duplex mode , make sure to set both the LAN card and the con necting de vices. For 100 0 BASE- T LAN card (PG-1852/1862/1891(L)/ 1892(L)/286/ 2861(L)/289) When a 1000Mbps ...

  • Fujitsu PG-28XX - page 81

    Appendix A 81 E A. 3 Jumbo Frame Gigabit Ethernet supports Jumbo frame. When using Jumbo frame, construct the Jumb o frame network using only devices that support Jumbo frame and ap ply the settings that will enable Jumbo frame. 1 Log on with administrator privileges. 2 Double click the LAN adapter to be used by Device Manager and start Intel ® PR ...

  • Fujitsu PG-28XX - page 82

    82 A. 5 Replacement Procedure for Cards that Configure T eams When replacing LAN card that configures a team, perfor m the following procedures. 1 After turning off the system power , replace the LAN card. 2 Restart the system. 3 Log on with administrator privileges. 4 Exit all running applications. 5 Double click the LAN adapter to be used by Devi ...

  • Fujitsu PG-28XX - page 83

    Appendix A 83 E A. 6 Procedure for installing in BX620S2/ BX620S3 When using BX620S2/BX620S3 with W indows Server 200 3 x64, this driver cannot be installed with the procedure s in "3.1 Updating the Driver" ( J pg.51) or "3.2 Adding a Card" ( J pg.59). Install the driver in the fo llowing procedures. A.6.1 Installing(Updating th ...

  • Fujitsu PG-28XX - page 84

    84 6 Double-click LAN adapter icon. “Properties” appears. 7 Click the [Driver] tab and cli ck [Update Driver]. The [Hardware Update Wizard] window appears. When the [Can Windows connect to windows Update to sear ch for softw are?] message appears, select [No, not th is time] and click [Next]. 8 Select [Install from a list or spec ific location] ...

  • Fujitsu PG-28XX - page 85

    Appendix B Contact In formation 85 E Appendix B Contact Information • Australia: Fujitsu Australia Limited T el: +61-2-9776-4555 Fax: +61-2-977 6-4556 Address: 2 Julius A venue (Cnr Delhi Road) North R yde, Australia N.S.W . 2113 • China: Fujitsu (China) Holdings Co., Ltd. T el: +86-21-5292-9889 Fax: +86-21-52 92-9566 Address: 18F , Citic Squar ...

  • Fujitsu PG-28XX - page 86

    86 • Singapore: Fujitsu Asia Pte. Ltd. T el: +65-6777-6577 Fax: +65-6771-55 02 Address: 20, Science Park Road, #03-01 T e leT ech Park, Singa pore Science Park II, Singapore 1 17674 •T a i w a n : Fujitsu T aiwan Limited T el: +886-2-231 1-2255 Fax: +886-2-231 1-2277 Address: 19F , No.39, Section 1, Chung hwa Road T aipei, T aiwan • Thailand: ...

  • Fujitsu PG-28XX - page 87

    ● 本書の内容は、改善のため事前連絡なしに変更することがあります。 ● 本書に記載されたデータの使用に起因する、 第三者の特許権およびその他の 権利の侵害については、当社はその責を負いません。 ● 無断転載を禁じます。 ● 落丁、乱丁本は、お取? ...

  • Fujitsu PG-28XX - page 88

    こ のマ ニ ュ ア ルは リ サ イ ク ルに 配慮 し て 製本 さ れて い ま す 。 不要に な っ た 際は、 回収 ・ リ サ イ ク ルに出 し て く だ さ い 。 ...

Manufacturer Fujitsu Category Planer

Documents that we receive from a manufacturer of a Fujitsu PG-28XX can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- PG-28XX manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu PG-28XX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu PG-28XX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu PG-28XX, service manual, brief instructions and user manuals Fujitsu PG-28XX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu PG-28XX.

Similar manuals

A complete manual for the device Fujitsu PG-28XX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu PG-28XX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu PG-28XX.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu PG-28XX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu PG-28XX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu PG-28XX, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu PG-28XX - which should help us in our first steps of using Fujitsu PG-28XX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu PG-28XX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu PG-28XX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu PG-28XX?

Use the form below

If you did not solve your problem by using a manual Fujitsu PG-28XX, ask a question using the form below. If a user had a similar problem with Fujitsu PG-28XX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)