Manual Lucent Technologies AC 60

410 pages 2.63 mb
Download

Go to site of 410

Summary
  • Lucent Technologies AC 60 - page 1

    Doc. No.: 2 55-700-025 COMCODE: 300303021 PacketSta r ™ Access Concentrator 60 User Guide A PacketStar ™ PSAX Central Of fice Product Issue 1, Octob er 2000 System Software Releas e 6.3.0 AQueV iew ™ EMS Softwar e Release 4.4 ...

  • Lucent Technologies AC 60 - page 2

    Copyri ght © 2 000 by L ucent T echnolo gies. A ll rights rese rved. For trad emark, regulator y compliance, and rela ted legal informa tion, see the " Copy righ t an d L egal Not ices" sect ion . ...

  • Lucent Technologies AC 60 - page 3

    255-700-0 25 iii Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Copyright and Legal Notices Copyright Copyrigh t © 2000 b y Lucent T echnolog ies. All right s reserved . This material is protected by t he copyright laws of t he United States and other countries. It may not be rep roduced, distrib uted, or altered in a n ...

  • Lucent Technologies AC 60 - page 4

    Copyright and Legal Notices W arranty Information iv 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 W arranty W ar nings ! CAUTION: Do not make elect rical or mechanical modifications to any of the components in the PSAX system. Lucent T echnologies is not responsible for the safety or the performance of a mo ...

  • Lucent Technologies AC 60 - page 5

    255-700-0 25 v Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Copyright and Legal Notices Regulato ry Standar ds Complian ce ! CAUTION: If your system or location loses power or your curr ent session ends abnormally while you are in the process of configuring the system, and you have not yet saved the values permanently ...

  • Lucent Technologies AC 60 - page 6

    Copyright and Legal Notices Regulatory St atements vi 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 is base d upon confo rmity wit h the followi ng standa rd(s) or other norma tive document (s): • EN 5502 2:1994 Class A • EN 5008 2-1:1992 • EN 60950:19 92+A1:1993+A2 :1993+A3:1995+A4:1 997+A11:1997 • ...

  • Lucent Technologies AC 60 - page 7

    255-700-0 25 vii Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Copyright and Legal Notices Regulat ory Statements The user is cautioned that any chan ges or mo difications n ot expres sly approv ed by the party respo nsible for compl iance could v oid the user ’ s author ity to opera te the e quipment. Part 68. This e ...

  • Lucent Technologies AC 60 - page 8

    Copyright and Legal Notices Regulatory St atements viii 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Canadian Regulatory Statements Industry Canada Information Ringer Equival ence Num ber (REN) Notice. T he Industry Canada label identifies certifi ed equipment. This certification means tha t the equipment me ...

  • Lucent Technologies AC 60 - page 9

    255-700-0 25 ix Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Copyright and Legal Notices Regulat ory Statements convenable. Da ns certains cas, il sera néces saire de prolo nger le câblage intérieu r de la ligne d’ab onné de la compagnie au moyen d’un co nnecteur homolo gué (ral longe de tél éphone) . L ’a ...

  • Lucent Technologies AC 60 - page 10

    Copyright and Legal Notices Regulatory St atements x 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ...

  • Lucent Technologies AC 60 - page 11

    255-700-0 25 xi Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Safety W ar nings and Information When installing and opera ting the Packet Star ™ Access Concentrator 60, follow th e safety g uidelines pr ovided below t o help prev ent serious i njury and/or damage t o the AC 60 equipment. Pl ease read all wa rnings and ...

  • Lucent Technologies AC 60 - page 12

    Safety Warnings and Information xii 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ! DANGER: The OC-3c Single Mode (SM) and the STM-1 Single Mode (SM) modules contain a laser -generating device, which emits a laser light beam from the transmit port. T his port is labeled T X on the module faceplate. When the m ...

  • Lucent Technologies AC 60 - page 13

    255-700-0 25 xiii Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Safety W arnings and Information the port), and place said cap on the port immediately after removing the cable from an operational module. W ARNING: ! If you place the AC 60 chassi s on or near the floor , dust or debr is may accumulate faster inside the c ...

  • Lucent Technologies AC 60 - page 14

    Safety Warnings and Information xiv 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ! CAUTION: Install or remove modules one at a t ime. Doing this aids in preventing the AC 60 syste m from indicating any err oneous failure messages, and allows the AC 60 sy stem to reinitialize and display the a ccurate configu ...

  • Lucent Technologies AC 60 - page 15

    255-700-0 25 xv Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Contents Copyright and L egal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i ii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies AC 60 - page 16

    Contents xvi 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Clothin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -11 Handlin g Chassis, Modu les, and Compo nents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Before Y ou Be ...

  • Lucent Technologies AC 60 - page 17

    Contents 255-700-0 25 xvii Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Network Mana gement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9 In-band Management SVCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 AQueV iew™ E ...

  • Lucent Technologies AC 60 - page 18

    Contents xviii 255 -700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Switched Virtual Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 6 Functional De scription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36 Call State ...

  • Lucent Technologies AC 60 - page 19

    Contents 255-700-0 25 xix Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 5 Enhanced DS1 Modul e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-55 ...

  • Lucent Technologies AC 60 - page 20

    Contents xx 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 DSP2 V oice Server Mo dule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 9 Software Featu r es. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -70 D ...

  • Lucent Technologies AC 60 - page 21

    Contents 255-700-0 25 xxi Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Adding an In- Band Management A TM SVC Connection . . . . . . . . . . . . . . . . . . . . . .4 -22 Preparing for an In-Ba nd Managem ent SVC Co nnection . . . . . . . . . . . . . . . . . . 4-2 3 Creating an In-Band- Management SVC Conne ction . . . ...

  • Lucent Technologies AC 60 - page 22

    Contents xxii 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Monito ring OAM Functionali ty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -24 Perform ing OAM T ests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -27 OAM T ests . ...

  • Lucent Technologies AC 60 - page 23

    Contents 255-700-0 25 xxiii Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Rebooting the AC System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32 Restor ing Datab ase Files Using XMod em/YModem Fi le T r ansfer . . . . . . . . . . . . . . . . 7 -32 Setting Up for the File T ransfe ...

  • Lucent Technologies AC 60 - page 24

    Contents xxiv 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix F: European Community Declarations of Conform ity . . . . . . . . . . . F-1 Overvie w of This A ppendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-1 ...

  • Lucent Technologies AC 60 - page 25

    Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 255-700-0 25 1-1 1 Getting Started Purpose of This G uide The Pac ketSt ar ™ Access Concentrator 60 User Guide provides information about the following: • Underst anding the AC 60 system functio ns and features • Configur ing basic sy stem paramete rs and managi ng the ...

  • Lucent Technologies AC 60 - page 26

    Chapter 1 Getting St arted Rela ted Read ing 1-2 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Related Reading Lucent T echnologies Information Products Product Information Libr ary T o install and use your AC 60, you will need to read the following publications, which are p rovided on your Lucent T echnolog ...

  • Lucent Technologies AC 60 - page 27

    255-700-0 25 1-3 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading Route Se rver Module Guide STM-1 Multi-M ode an d Single -Mode 1+1 MSP Module Guide STM-1 Multi-Mode and Single- Mode Modules Guide T ones and Annou ncemen ts Serv er Module Gu ide V o ice 2-Wire Station Module Gu ...

  • Lucent Technologies AC 60 - page 28

    Chapter 1 Getting St arted Rela ted Read ing 1-4 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Printed Documents For your convenience, the following documents from your Product Informati on Library CD-ROM are also available in printe d form. For ordering information, contact your Lucent T echnolo gies distri ...

  • Lucent Technologies AC 60 - page 29

    255-700-0 25 1-5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading DS1 IMA Module User Guide, Release 6.3 Issue 1 30030309 6 255-700-0 32 DS3 A TM Modul e User Gu ide, Release 6.3 Issue 1 30030310 4 255-700-0 33 DS3 Frame Relay Module User Guide, Rele ase 6.3 Issue 1 30030311 2 25 ...

  • Lucent Technologies AC 60 - page 30

    Chapter 1 Getting St arted Rela ted Read ing 1-6 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Other Publications Numerous book s are currently available on the subject of bas ic telecommunications technology and specific protocols. In addition to such general reading, you should a lso be familiar with the s ...

  • Lucent Technologies AC 60 - page 31

    255-700-0 25 1-7 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading ~ User to Network Interf ace (UNI) Specification V ersion 3.1 ~ VTOA AA L1 T runking Ser vices, af-vtoa-0098 .000 • A TM Forum Impleme ntation Ag reements: ~ Inverse Multiplexin g over A TM V ersion 1.0, af-phy-0 ...

  • Lucent Technologies AC 60 - page 32

    Chapter 1 Getting St arted T ext Conve ntions 1-8 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 ~ I.356, B-ISDN A T M Layer Cell T ransfer Performance ~ I.361, B-ISDN A T M Layer Specification ~ I.363, B-IS DN A TM Adaptation L ayer (AAL ) Specifica tion ~ I.371, B-ISDN T raffic Cont rol and Congestion Contr ...

  • Lucent Technologies AC 60 - page 33

    255-700-0 25 1-9 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Electrostat ic Dis charge (ESD) P r ecau tions Icons and Symbols Follow all safe ty guidelines in this document to help prev ent personal injury to you and damage to the Packet Star ™ Access Con centrato r 60 system equipment. Re ...

  • Lucent Technologies AC 60 - page 34

    Chapter 1 Getting St arted Electrost atic Dis charge (ESD) Precauti ons 1-1 0 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Grounding W rist Straps Usin g a grounding wrist strap (s ee Figur e 1) is re commended when i nstallin g and opera ting the AC 60. Follow t hese guideline s for gr ounding w rist stra ...

  • Lucent Technologies AC 60 - page 35

    255-700-0 25 1-11 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Before Y ou Begin constant atte ntion to carpeting maintenance is acceptable, but time- consuming. Humidity Maintaining the proper humidity i n the room whe re the AC 60 sy stem will be located helps control many static proble ms. ...

  • Lucent Technologies AC 60 - page 36

    Chapter 1 Getting St arted About Lu cent T echnolo gies 1-1 2 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 • Determine the numbering scheme for the in-band connections you will be using. About Lucent T echnologies History Lucent T echnologies is the communications systems and technology company formed th ...

  • Lucent Technologies AC 60 - page 37

    255-700-0 25 1-13 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Y ou may also fax the co mment card to us at: 301-8 09-4540. ...

  • Lucent Technologies AC 60 - page 38

    Chapter 1 Getting St arted 1-1 4 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 ...

  • Lucent Technologies AC 60 - page 39

    Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 255-700-0 25 2-1 2 Har dwar e Description Overview o f This Chapter This chap ter prese nts a descr iption of t he variou s hardware components of the Pa cketStar ™ Access Concentr ator 60 sy stem. System Hardwar e Compon ents The fol lowing hardw are compo nents make up t ...

  • Lucent Technologies AC 60 - page 40

    Chapter 2 Hardware Description Chassis Architecture 2-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ Ethernet module ~ High-D ensity E 1 module ~ High-Spe ed module ~ Medium-Density DS1 module ~ Multi-Seri al module ~ OC-3c Mu lti-Mode (MM) mod ule—two typ es available : • AQue Man ™ firmw are (M MAQ ...

  • Lucent Technologies AC 60 - page 41

    255-700-0 25 2-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 2 Hardware Description Chassis Architectur e of the chassis faceplate has controls and indicators for the common equipm ent co mponent s (see F igure 2-1). The chas sis backpla ne distrib utes dat a, clock sig nals, and po wer to t he modules. Fr om ...

  • Lucent Technologies AC 60 - page 42

    Chapter 2 Hardware Description AC 60 System Hardwar e Specifications 2-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 clock signal. The port is not intended to be directly connected to a network interface as outside plant. Central Pr ocessing Unit Component The Cen tral Processi ng Unit (CP U) compone nt pro ...

  • Lucent Technologies AC 60 - page 43

    255-700-0 25 2-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 2 Hardware Description AC 60 System Envir onmen tal Sp ecificatio ns appear on surfa ces. The temperature and relative humidity must be kept within the specified tole rance limits as shown in T a ble 2-2. Facility Power Sour ce Requirements Th r e e ...

  • Lucent Technologies AC 60 - page 44

    Chapter 2 Hardware Description AC 60 System Envir onmen tal Sp ecificatio ns 2-6 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 2-3 p rovides the env ironmental specifications for the AC 60 power supply . AC 60 CPU and Stratum Component Specifications This section det ails the specifi cations for the in ...

  • Lucent Technologies AC 60 - page 45

    255-700-0 25 2-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 2 Hardware Description AC 60 Physical Interface Specifi cations The hardware specifications for the AC 6 0 Stra tum 3–4 compone nt are given in T able 2 -5. ! CAUTION: The external synchronization interface port pr ovided on the Stratum 3–4 modul ...

  • Lucent Technologies AC 60 - page 46

    Chapter 2 Hardware Description I/O and Se rver Modu les Specif ication s 2-8 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 I/O and Server Modu les Specifications Memory alloca tion, bandwidth clas sification (based on the module throughput) , and power consumption for each Packet Star I/O and serv er module a ...

  • Lucent Technologies AC 60 - page 47

    255-700-0 25 2-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 2 Hardware Description I/O and Server M odules Spec ifications Note: The I/O b uffers carry 1 6,384 cells pe r megabyte for a ll Access Concen trator modules except the V oice 2-Wire Office module, the V oice 2-W ire Station module, and the DSP2A, DS ...

  • Lucent Technologies AC 60 - page 48

    Chapter 2 Hardware Description I/O and Se rver Modu les Specif ication s 2-1 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ...

  • Lucent Technologies AC 60 - page 49

    Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 255-700-0 25 3-1 3 System Featur es Overview o f This Chapter This chapt er pres ents a softw are overvi ew of the PacketSt ar ™ Access Concen trator 60 offered by Lucent T ech nologies. The follow ing aspects of t he Packe tStar ™ Access Concentr ator 60 system are disc ...

  • Lucent Technologies AC 60 - page 50

    Chapter 3 Syst em Features System Ca pabil ities 3-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 While voice, vide o, and data traffi c have traditionally bee n carried on separa te overl ay netw orks, th e PacketSt ar ™ A ccess C oncentrat or syste ms aggreg ate all traffic typ es into a common network i ...

  • Lucent Technologies AC 60 - page 51

    255-700-0 25 3-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Interface Archite cture • PNNI, w hich computes paths through a netw ork by defini ng a method for distributing topolog y information between switches and clusters of switches. PNNI also provides a method for signaling use d to e ...

  • Lucent Technologies AC 60 - page 52

    Chapter 3 Syst em Features User Interfaces 3-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Circuit Emulation Servi ce Circuit emulation service transports traffic over a virtual channel-based connection. Circuit emulation service prov ides service to the end user that is indistin guishable fro m a real poin ...

  • Lucent Technologies AC 60 - page 53

    255-700-0 25 3-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features User Interfaces Dynamic Bandwidth Cir cuit Emulation Ser vice The dynamic bandwidth circuit emulation service (DBCES) feature is used with voice PVC connections to bes t utilize the available network bandwidth. This feature allows ...

  • Lucent Technologies AC 60 - page 54

    Chapter 3 Syst em Features User Interfaces 3-6 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 HDLC Pass-through The high-level data link control (HDLC) pass-through interface is a bit- oriente d, ITU- TSS (T elecommu nications Standard Se ction) link l ayer protocol standard for poi nt-to-point and point- to-m ...

  • Lucent Technologies AC 60 - page 55

    255-700-0 25 3-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features User Interfaces topology i nformation be tween switches and clusters of s witches. This information is used to comp ute paths through the network, whether it is local or worldwide. The hierarchy mechanism of PNNI ensures that this ...

  • Lucent Technologies AC 60 - page 56

    Chapter 3 Syst em Features User Interfaces 3-8 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 PNNI allows hierarchies but doe s not require them. It is also possible to deploy PNNI with one peer group encompassing a ll switches within a network. PNNI switche s in the same peer group discover one another by sen ...

  • Lucent Technologies AC 60 - page 57

    255-700-0 25 3-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Network Mana gement The user par t is the las t seven by tes, and is reserved for end-sys tem identificati on (insignificant to the PNNI). The netwo rk part is the first 13 bytes, and i s used to ide ntify peer gr oups. Each level ...

  • Lucent Technologies AC 60 - page 58

    Chapter 3 Syst em Features Network Mana gement 3-1 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 As the simplest optio n, the CPU module facep late provides an EI A-232 serial port (RJ-11 connector labeled CONSO LE), to which a PC workstation or a console monitor , running a standard VT100 terminal emulato ...

  • Lucent Technologies AC 60 - page 59

    255-700-0 25 3-11 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Network Mana gement c. H ybrid connection, which connects the main router Access Conc entra tor system directly to the end system Access Conce ntrato r system through A TM PVC co nnections. These A TM PVC connections can be sent t ...

  • Lucent Technologies AC 60 - page 60

    Chapter 3 Syst em Features Network Mana gement 3-1 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 application or the AQueV iew ™ EMS Clie nt-only application on the sa me management workstation a s NavisCore ™ , the service management softwa re for the core switches. Running both service ma nagement sys ...

  • Lucent Technologies AC 60 - page 61

    255-700-0 25 3-13 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures PSAX 1 250, PSAX 2 0, AC 60 and AC 30, and Releas e 6.0 softwa re for all models bu t the PSAX 2300 syst em. (The PSAX 230 0 system wa s first intro duced wit h PSAX R elease 6. 1.0 syst em softwa re.) No ...

  • Lucent Technologies AC 60 - page 62

    Chapter 3 Syst em Features AC 60 Software Featur es 3-1 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Operatio n As the DHP VC is established, both the primary and standby circuits are provisioned from the originating node to the terminating node, through the A T M network. When pr ovisioning the pri mary ...

  • Lucent Technologies AC 60 - page 63

    255-700-0 25 3-15 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures If zero errors are detecte d by the AC 60 system for a user -selectable interval of 10 seco nds, 30 seco nds, 1 minu te, or 5 m inutes (or not allowed) , the system restores the prima ry link. AQueMan™ ...

  • Lucent Technologies AC 60 - page 64

    Chapter 3 Syst em Features AC 60 Software Featur es 3-1 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 3-1 det ails the Access Concent rator system su pport of defined A TM quality of s ervice (QoS) class es. T able 3-2 illust rates t he attrib utes of th e classe s of servi ce suppo rted b y the Acc ...

  • Lucent Technologies AC 60 - page 65

    255-700-0 25 3-17 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures The following two tables il lustrate how A TM classes of service map to internal priority levels to structure the AQueM an™ alg orithm. T able 3- 3 identif ies the cell-lo ss and cell-del ay to lerance ...

  • Lucent Technologies AC 60 - page 66

    Chapter 3 Syst em Features AC 60 Software Featur es 3-1 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 AQueMa n™ classifies traffic based on s ervice-level prior ities and limits congestion by addressing three dimensions of traffic management: • Cell loss v ersus cell dela y for cell disc ard As T a b l ...

  • Lucent Technologies AC 60 - page 67

    255-700-0 25 3-19 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures buffers. The execution of this a lgorithm is ba sed on the priori ty levels the use r select s. • Cell aging This capabili ty prevents the low est-priority d ata (for example , IP data) f rom being buff ...

  • Lucent Technologies AC 60 - page 68

    Chapter 3 Syst em Features AC 60 Software Featur es 3-2 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Ethernet LAN Bridging The Ethernet LAN bridging fe ature is provided on the Ethernet module . The variou s function s and interface s associ ated with Ethe rnet LANs ar e governe d by standards published b ...

  • Lucent Technologies AC 60 - page 69

    255-700-0 25 3-21 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures The Ethernet LAN bridging feature incorporates the following functions: • Bridgi ng Ethernet MAC layer d ata is encaps ulated by using standards in the A TM Forum docum ent RFC 1 483. • Filtering Cert ...

  • Lucent Technologies AC 60 - page 70

    Chapter 3 Syst em Features AC 60 Software Featur es 3-2 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 from ANSI Compo site clocks, ITU- T Composite clocks, T1 BITS a nd E1 BITS clock sources directly for chassis synchronization. The Access Concentra tor CPU h as access to the fi rmware bi naries of all mod ...

  • Lucent Technologies AC 60 - page 71

    255-700-0 25 3-23 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures tolerant base connections. Each connection (A TM-to-A TM, VCC, PVC) is created between an A TM- enabled port on a Multi-Serial module and another A TM port (such as the OC -3c and the S TM-1 modules). Int ...

  • Lucent Technologies AC 60 - page 72

    Chapter 3 Syst em Features AC 60 Software Featur es 3-2 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Frame Relay-to-A TM Interworking Any port on the Channelized DS3, Channelized STS-1e, Enhanced DS1, Enhanced E1, DS3 Frame Relay , and Multi-Serial mod ules can be used to connect to a frame relay device . ...

  • Lucent Technologies AC 60 - page 73

    255-700-0 25 3-25 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures prefixe s, registere d A TM addresse s, and re gistered services an d capabilities available at its A TM interfaces. It also determines the operational status of the logical port . ILMI is s upported for ...

  • Lucent Technologies AC 60 - page 74

    Chapter 3 Syst em Features AC 60 Software Featur es 3-2 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The LANET protocol is designed to be active in the upper end of the physical layer of the OSI seven-lay er model. W ithin a byte-orie nted s erial data strea m, LANET provi des a framing str ucture around ...

  • Lucent Technologies AC 60 - page 75

    255-700-0 25 3-27 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures address with in the same 10-nibble header space of s tandard A TM cells. In addition, it avoids the ext ra delay (detr imental to CBR t raffic) requi red of multiple header -encoding sche mes. In practice ...

  • Lucent Technologies AC 60 - page 76

    Chapter 3 Syst em Features AC 60 Software Featur es 3-2 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 receivi ng, and intr epreting F4/F5 OAM flows. T his feat ure require s the u ser to run AQue Win ™ and the AQueV iew ™ syst em. OAM Functions The OAM functions (and their cell types) are: • Fault ma ...

  • Lucent Technologies AC 60 - page 77

    255-700-0 25 3-29 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures circuit level connections, where the circuit virtual channel (VC) flows are identifi ed by the payl oad type (P T) values. Character istics of OAM F4 Cells • Bidi rection al • Have the same VPI value ...

  • Lucent Technologies AC 60 - page 78

    Chapter 3 Syst em Features AC 60 Software Featur es 3-3 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 accepts the request, the specified sour ce point(s) st arts sending continuity checks periodically to the receiving point. A source may send continuity check cells independently of the user ’ s cells se ...

  • Lucent Technologies AC 60 - page 79

    255-700-0 25 3-31 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures • LOP (Loss of Pointe r) alarm The LO P alarm indi cates the receiving equipment has lost th e pointer to the start cell in the payload. • P-AIS ( Path Alar m Indicat ion Sig nal) The P-AIS alarm can ...

  • Lucent Technologies AC 60 - page 80

    Chapter 3 Syst em Features AC 60 Software Featur es 3-3 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ Intradomain loo pback: A segment lo opback is insert ed by a connection/segment end point or a connecting point, and looped back by a segment or a connecting point. For this applicatio n, the use of the ...

  • Lucent Technologies AC 60 - page 81

    255-700-0 25 3-33 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures • The AIS a larm is sto pped by t he NE when it detects an averag e pulse density of at least 12.5% with no more than 15 consecutive zeros over a perioid of 175 +/- 75 pulse positions, starting wit h re ...

  • Lucent Technologies AC 60 - page 82

    Chapter 3 Syst em Features AC 60 Software Featur es 3-3 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 declares a Loss of S ignal (LOS) a fter a vio lating per iod (20 +/- 3 microseconds ) of consecutive all zero bytes, or zero optical power , is detected in the received signa l. • The MS-A IS alarm is cl ...

  • Lucent Technologies AC 60 - page 83

    255-700-0 25 3-35 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures Modules: E1 IMA, En hanced E1, High-Density E1 A network e lement ( NE) will tra nsmit an AIS alarm w hen the defect of two or fewer zer os in each of two conse cutive double frame periods (a to tal of 51 ...

  • Lucent Technologies AC 60 - page 84

    Chapter 3 Syst em Features AC 60 Software Featur es 3-3 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 traffic manageme nt to t he OC-3c APS and the STIM-1 MSP modules . Phase 2 gives this capabili ty to the Channelized DS3, DS1 and E1 modules. One of the main improv ements is upgraded usag e parameter cont ...

  • Lucent Technologies AC 60 - page 85

    255-700-0 25 3-37 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures allows on-de mand allocation of bandwidth and conn ection resources . The signaling prot ocol supports the following basic function s at the UNI interface: Call States C a l l s ta t e s e x i st on bo t ...

  • Lucent Technologies AC 60 - page 86

    Chapter 3 Syst em Features AC 60 Software Featur es 3-3 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 port. Bo th user-side and networ k-side interfa ces undergo s imilar state transitions. T ransition message s trigger these call-state chan ges as follows: Call Stat es Description #0—Null No ca ll exist ...

  • Lucent Technologies AC 60 - page 87

    255-700-0 25 3-39 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures The following state transit ion messages are used for A TM point -to-point call and connection control: • The infor mation ele ments used in th e Call Establ ishment-Set up message allow the user to re ...

  • Lucent Technologies AC 60 - page 88

    Chapter 3 Syst em Features AC 60 Software Featur es 3-4 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T raffic Shaping The traffic shaping feature is a method for controlling the flow of data traffic. It is impleme nted in firmware o n modules that ar e offered with traff ic- shaping variatio ns. Those mod ...

  • Lucent Technologies AC 60 - page 89

    255-700-0 25 3-41 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features AC 60 Sof tware Fea tures MBS par ameter , end use rs whose traffic violat es their co ntractual MB S parameter experience high cell loss (and hence high pa cket loss). With the traffic-shaping fe ature of the OC-3 c and the STM-1 ...

  • Lucent Technologies AC 60 - page 90

    Chapter 3 Syst em Features AC 60 Software Featur es 3-4 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The algorit hm processes traf fic moving out of the input cell selection buff er according to the SC R of the pa rticular VPC /VCC. The MBSs of traffic-shap ed output are set as follows: The OC-3c a nd the ...

  • Lucent Technologies AC 60 - page 91

    255-700-0 25 3-43 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features I/O, Optica l, and Server Modul es The DSP 2C module su pports A TM Adaptation Layer 2 (AAL-2) S VC connections and PVC multiplexing for reduced ca ll latency . T o protect facsimile t ransmissions, the DSP2C module automatically ...

  • Lucent Technologies AC 60 - page 92

    Chapter 3 Syst em Features I/O, Opti cal, and Server Mo dules 3-4 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • E1 IMA module • E3 A TM modul e • Enhanced DS1 module • Enhanced E1 module • Ethernet module • High-D ensity E 1 module • High-Spe ed module • Medium-Density DS1 module • Mult ...

  • Lucent Technologies AC 60 - page 93

    255-700-0 25 3-45 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Channeli zed DS3 Modul e Channelized DS3 Module The Cha nnelized DS3 module prov ides one p ort with a lin e rate of 44.736 Mbps . The user can configure this module to provide N x 64 Kbps (fractional DS1) structured circuit emula ...

  • Lucent Technologies AC 60 - page 94

    Chapter 3 Syst em Features Channel ized STS -1e (T1) M odule 3-4 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • Private Network -Network Interface (PNN I), Specification V er sion 1.0 , af-pnni- 0055.000 • Integrated Local Mana gement Interface (ILMI) Specification V ersion 4.0, af-ilmi- 0065.000 The ...

  • Lucent Technologies AC 60 - page 95

    255-700-0 25 3-47 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Channeli zed STS-1e (T1) Modul e emulation, the Channelized ST S-1e T1 module can adapt a maximum of 28 DS-1 channels per port to ATM virtual channels with i ndividual VPIs a nd VCIs. Signa lling bit tra nsport is als o provided, ...

  • Lucent Technologies AC 60 - page 96

    Chapter 3 Syst em Features DS1 IMA M odule 3-4 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ Frame r elay UNI and NNI ( FRF . 1, FRF .2, FR F .5, and FRF .8) ~ ITU-T I.370 (fra me relay policing) ~ Congest ion management ~ T raffic policing Ha rd wa re Fe a t ure s • Number of ports: one • Connector ...

  • Lucent Technologies AC 60 - page 97

    255-700-0 25 3-49 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features DS3 A T M Mod ule DS3 A TM Module The DS3 A TM module pr ovides a networ k interface at D igital Signa l Level 3 (DS-3), with a line rate of 44.736 Mbps . This module accommodates A TM cell- bearing traf fic. T ypically , this mod ...

  • Lucent Technologies AC 60 - page 98

    Chapter 3 Syst em Features DS3 IMA M odule 3-5 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • FRF .2 —Network- to-Net work Int erface (NNI) • FRF .5—Fr ame Rela y/A TM PVC Net work Inte rworking • FRF .8— Frame R elay/A TM PVC S ervice I nterwork ing • Multise rvices: ~ Frame r elay UNI and ...

  • Lucent Technologies AC 60 - page 99

    255-700-0 25 3-51 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features DS3 A T M Mod ule Module User Guide ) an d the DS 1 IMA module (see the PacketSta r ™ DS1 IMA Module User Guide ). I t allows you to configure up to 28 virtual T1 ports for n a t i v e DS 1 ATM s e r v i c e s or fo r a s m an y ...

  • Lucent Technologies AC 60 - page 100

    Chapter 3 Syst em Features DS3 Frame Relay Module 3-5 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Concen trator system to an ATM e dge switch . The DS3 A TM modu le has three types of L ED indicators: FAIL, ACTI VE, and LOS ( loss of sign al). Softwar e Featur es The DS3 A T M module uses A TM Forum spec ...

  • Lucent Technologies AC 60 - page 101

    255-700-0 25 3-53 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features E1 IMA Module ~ Frame r elay UNI and NNI ( FRF . 1, FRF .2, FR F .5, and FRF .8) ~ ITU-T I.370 (fra me relay policing) ~ Congest ion management ~ T raffic policing ~ HDLC pass -thro ugh Frame Relay The DS3 Frame Relay module ha s ...

  • Lucent Technologies AC 60 - page 102

    Chapter 3 Syst em Features E3 A TM Module 3-5 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 E-1 lines. At the destination IMA module, the E-1 streams a re merged back together in correc t order a nd passed on to other modules a s directed by virtual circuit connections. IMA dynamically handles conditions w ...

  • Lucent Technologies AC 60 - page 103

    255-700-0 25 3-55 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features En hanced DS1 Mo dule • Integrated Local Managem ent Interface Specification V ersion 4.0, af-ilmi-0065.000 Ha rd wa re F ea t ure s • Number of ports: two • Connector type: four B NC connectors for the two ports (each port ...

  • Lucent Technologies AC 60 - page 104

    Chapter 3 Syst em Features Enhance d DS1 Module 3-5 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Note: The Enhanced DS1 Circuit Emulation (CE only) module is functionally identical to the Enhanced DS1 module, except that the Enhanced DS1 (CE only) module provides a license for circuit emulation functions ...

  • Lucent Technologies AC 60 - page 105

    255-700-0 25 3-57 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features En hanced E1 Modu le • Line rat e: 1.544 Mbps Enhanced E1 Mod ule The Enhanced E1 mo dule provides six p orts, each with a line rate of 2.048 Mbps. The interface s support ITU- T G.703 and ITU G.704. Each por t can be independen ...

  • Lucent Technologies AC 60 - page 106

    Chapter 3 Syst em Features Ethernet Module 3-5 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 A T M Forum T echnical Committee Specifications: • Circuit Emulation Service Interoperability Specification Version 2.0 af-vtoa- 0078.00 • User-to-Network Interface Spe cification Version 3.0 , af-uni. 0010.001 ...

  • Lucent Technologies AC 60 - page 107

    255-700-0 25 3-59 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features High-Densi ty E1 Modul e Softwar e Featur es The E thernet bridging feature includes the encap sulation of the media access control (MAC) layer data , using standards i n the A TM Forum RF C 1483 specification, for filte ring and ...

  • Lucent Technologies AC 60 - page 108

    Chapter 3 Syst em Features High-Spe ed Module 3-6 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 af-ilmi-0065.000 Multi-Serv ices: • A TM: A TM UNI 3.0 and 3. 1; Interim inter -switch signaling protocol (IISP) user , IISP network • CE: Circuit emulation service (CES) with ISDN PRI using 64 Kbps clear ch ...

  • Lucent Technologies AC 60 - page 109

    255-700-0 25 3-61 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Medium-Densi ty DS1 Modul e The soft ware suppor ts the follo wing A TM Foru m T echnical Committe e Specifications : • Circuit Emulation Service Interoperability Specification Version 2.0 af_vtoa_ 0078.00 • User t o Network I ...

  • Lucent Technologies AC 60 - page 110

    Chapter 3 Syst em Features Medium-De nsity DS1 Modu le 3-6 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 integrated services digital net work with a primary rate interf ace (ISDN PRI) service, a nd A TM services. Y ou can configur e the Medium-Density DS1 module to provide N x 64 Kbps (fractional T1) struc ...

  • Lucent Technologies AC 60 - page 111

    255-700-0 25 3-63 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Multi -Seria l Modu le • HDLC pass throug h mode (N x 56 and N x 64) • Frame r elay UNI and NNI ( FRF . 1, FRF .2, FR F .5, and FRF .8) • ITU-T I.37 0 (Frame re lay policing) • Congest ion management • T raffic policing ...

  • Lucent Technologies AC 60 - page 112

    Chapter 3 Syst em Features Mult i-Seri al Mo dule 3-6 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 asynchronous transfe r mode (A TM) (using limit less A TM network [LANET] protocol). Softwar e Featur es The so ftware suppor ts the following Fra me Rela y Forum (FR F) Implem entation Agreement s: • FRF ...

  • Lucent Technologies AC 60 - page 113

    255-700-0 25 3-65 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Multi -Seria l Modu le Circuit Emulation Each port on the Multi-Serial module can be configured to perform adaptatio n for circui t emulati on. The imp lementation of A TM Adaptatio n Layer 1 (AAL- 1) allows for t he transmission ...

  • Lucent Technologies AC 60 - page 114

    Chapter 3 Syst em Features V oice 2-Wire Of fice Mod ule 3-6 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • Interface s supporte d: EIA-2 32-D, EIA-530, EIA-449 v .1 1 (subset), and V .35, with the Acces s Concentrator system configured as either a data terminating e quipment (DTE) or a data co mmunicat ...

  • Lucent Technologies AC 60 - page 115

    255-700-0 25 3-67 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Optical-T ype I/O Modul es voice device can be connected directly to this module in the Acces s Concentrator sys tem to communicate over an A T M network. The V oice 2-Wire Station module has three types of LED indicators: ACTIV E ...

  • Lucent Technologies AC 60 - page 116

    Chapter 3 Syst em Features OC-3c Mul ti-mode and Singl e-Mode Modu les 3-6 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • One variat ion for bo th the Multi- Mode and Sing le-Mode types, wit h the names OC-3c MM AQ module and OC-3c S M AQ module, uses the AQueM an ™ algorithm for flo w control. • Th ...

  • Lucent Technologies AC 60 - page 117

    255-700-0 25 3-69 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules STM-1 Multi-Mode and Single-Mode Modules The STM-1 Multi-M ode (MM) an d Single-M ode (SM) m odules pr ovide a fiber o ptic interf ace operat ing in the concat enated mod e of the SONET ...

  • Lucent Technologies AC 60 - page 118

    Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules 3-7 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • Interim Inter-Switch Signaling Pr otocol, af-pnni-0026.000 • Private Network -Network Interface (PNN I), af-pnni-0055.000 Protocol s: • T raf fic management: ~ AQueM an™ algori ...

  • Lucent Technologies AC 60 - page 119

    255-700-0 25 3-71 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Server Modu les Server Modules DSP2 V oic e Server Module The DSP 2C V oice S erver module pr ocesses vo ice and other dig ital da ta on a Packe tStar ™ Access C oncentrator system . Th e modu les h ave t wo i ntern al logical p ...

  • Lucent Technologies AC 60 - page 120

    Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • Soft perma nent virtual cir cuit (SPVC) s upport for circuit e mulation servi ce (CES ). SPV C connec tions can be used for voice traf fic on all mode s of the DSP2C V oice Serv er (A, B, and Echo Ca ...

  • Lucent Technologies AC 60 - page 121

    255-700-0 25 3-73 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le T able 3-9. Matrix of Featur es and Standar ds Supported on the DSP2C Modes A , B and Echo Cancellation Releas e 6.3.0 DSP2C Non-Multiple xed AAL2 (Non-M ux-Aal2) DSP2C Standar d AAL2 DSP2A DSP2 B Echo ...

  • Lucent Technologies AC 60 - page 122

    Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 DSP2C V oice Server F eatures Multiplexed or Nonmultiplexed AAL-2 The choice of multiplexed A TM Adaptation Layer 2 (AAL-2) has been added. As the capaci ty of the DSP2C is 32 DSPs , up to 32 trunk group ...

  • Lucent Technologies AC 60 - page 123

    255-700-0 25 3-75 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le on-hook t o off-hook , where the on- hook state last bet ween 300 m sec and 1000 ms ec. This fea ture is compliant w ith TIA/EIA-4 64-B Requ irements for Privat e Bran ch Excha nge (P BX) Swit ching Eq ...

  • Lucent Technologies AC 60 - page 124

    Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 DSP2A and DSP2B Single-Mode V oice Server Modules (System Release 6.2.0) ! CAUTION: The DSP2A and DSP2B Single-Mode Modules a re not upgr adable to System Softwa re Release 6.3.0. See T able 3-10 for a s ...

  • Lucent Technologies AC 60 - page 125

    255-700-0 25 3-77 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features Route S erver Modul e • On the DSP2A a nd DSP2B si ngle-mode module s, the number of t ails supported in echo cancellation is 32 msec fe wer than in DSP2C mode i n Ta b l e 3 - 1 0 . • In the DSP2B single-mode , the number of ...

  • Lucent Technologies AC 60 - page 126

    Chapter 3 Syst em Features T ones and Announ cements Se rver Module 3-7 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Y ou can assign an authenti cation password to an IP network inte rface for maximum security . Doing so can prevent those who cannot directly access the net work from sending fa lse routing ...

  • Lucent Technologies AC 60 - page 127

    255-700-0 25 3-79 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 3 Syst em Features and edge devices s uch as the AC 60 and the PSAX 20, the module offers call routing information to a connection gateway without using an expensive circuit switch. Up to 128 circuits can be tested simultaneously using the T AS Serv ...

  • Lucent Technologies AC 60 - page 128

    Chapter 3 Syst em Features 3-8 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ...

  • Lucent Technologies AC 60 - page 129

    Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 255-700-0 25 4-1 4 Configuring the Basic System Overview o f This Chapter This ch apter des cribes ho w to configure the PacketStar ™ Access Concen trator 60 sys tem and set the syst em values for your site. Before you do this, be sure you have done the fo llowing tasks as ...

  • Lucent Technologies AC 60 - page 130

    Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The A C 60 Lo gon wind ow is displa yed (s ee Figu re 4-1) : 3 In the Username field, type one of the following values, and press Enter: ~ readwrite if you want to view and change all co nfigura ...

  • Lucent Technologies AC 60 - page 131

    255-700-0 25 4-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem The Conso le Interf ace Main Menu window is dis played (see Figure 4-2). End At the time of initial configura tion, the Console Interface M ain Menu window i s displayed a field with a pair o ...

  • Lucent Technologies AC 60 - page 132

    Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Begi n V iewin g the Hel p W indo ws 1 On the Conso le Inter face Ma in Menu window , press the ? ke y . The firs t Main Menu H elp window is d isplayed (s ee Figure 4 -3): Figur e 4-3. Main Men ...

  • Lucent Technologies AC 60 - page 133

    255-700-0 25 4-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem 2 T o display the second through fourth Main Menu Help windows (see Figure 4- 4 through Figure 4 -6), pres s the Down Ar row . Figur e 4-4. Main Me nu Help Window 2 Figur e 4-5. Main Me nu He ...

  • Lucent Technologies AC 60 - page 134

    Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-6 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 En d Selecting Options, Fields, and Commands As described o n the Help windows, follow these st eps to select an option, field, or co mmand: 1 Press the Up Arrow o r the Down Arrow to highlight ...

  • Lucent Technologies AC 60 - page 135

    255-700-0 25 4-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Changi ng th e System Pass word and Ot her User Option s ~ The informati on line displays a messa ge indicating an e rror or successful completion of the command. ~ The sys tem displ ays the nex t higher l evel or pre ...

  • Lucent Technologies AC 60 - page 136

    Chapter 4 Configuring the Basic System Chan ging the S ystem Passwor d an d Other Use r Options 4-8 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The User Options win dow is displa yed (see Figure 4 -7). 2 Select the Change Password For < us ername > fi eld. a. As prompt ed on the window , type the curr ...

  • Lucent Technologies AC 60 - page 137

    255-700-0 25 4-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Console Interface Main Men u 6 On the Console Interfa ce Main Menu window , select the Save Configuration command, and press Enter to store the values in the PSA X syst em dat abase . Th e new v alues will t ake eff ec ...

  • Lucent Technologies AC 60 - page 138

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The Site-Sp ecific Menu windo w is displayed (see Fig ure 4-8). 2 On the Site Specific Menu w indow , select t he Site-Specific Configuration command. Figur e 4-8. Site-Specifi c ...

  • Lucent Technologies AC 60 - page 139

    255-700-0 25 4-11 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site The Site-Sp ecific Configu ration windo w is displayed (see Figur e 4-9). Note: The syste m performs error che cking on each field by highlighting any field containing an incorre ...

  • Lucent Technologies AC 60 - page 140

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 3. CPU IP a nd switch IP address es cannot be on the same subnet as the in-ban d IP addres s. 4. CPU IP , switch IP , and in-band IP addres ses may each be zero, but CPU IP and Sw ...

  • Lucent Technologies AC 60 - page 141

    255-700-0 25 4-13 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Begi n V iewin g OAM Pro perties 1 Select the values for the fields in the Master A TM Address and OAM related data pan el as descr ibed in T able 4 -1. 2 Select the Apply Site-S ...

  • Lucent Technologies AC 60 - page 142

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Begi n Enter ing th e Syste m Iden tifi cation T o s e t t h e sy s t e m id e n t i f i c a t i o n fo r yo u r si t e , s e l e c t t h e va l u e s f o r t h e f i e l d s on t ...

  • Lucent Technologies AC 60 - page 143

    255-700-0 25 4-15 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site 4 Select the Apply Site-Specific Configuration comma nd, and either press Ent er to save these values now , or after you have entered data in all the fields on this windo w . End ...

  • Lucent Technologies AC 60 - page 144

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 5 Select the Apply Site-Specific Configuration comma nd, and either press Enter to save these values now , or wait until you have ente red data in all the fields on this window . ...

  • Lucent Technologies AC 60 - page 145

    255-700-0 25 4-17 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Configuring the TCP Client/Server f or a Connection Gateway If you ar e using the Connection Gateway API with your Packe tStar AC 60 system , you need to con figure t he syste m ...

  • Lucent Technologies AC 60 - page 146

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Connection Gateway Application Programming Interfa ce API is a pro tocol that can be used inste ad of SNMP to mana ge the Lucent T echnologie s PSAX syst ems. It prov ides an inte ...

  • Lucent Technologies AC 60 - page 147

    255-700-0 25 4-19 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Figur e 4-12. TCP Server Configu ration Window (Client TCP T ype) Figur e 4-13. TCP Server Configu ration Window (S erver TCP T ype) ...

  • Lucent Technologies AC 60 - page 148

    Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-2 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: 3 Y ou ca n enter data into the fie lds on the TCP Serve r Configuration window as described in T able 4-4. Sele ...

  • Lucent Technologies AC 60 - page 149

    255-700-0 25 4-21 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Begi n Entering t he SNMP T rap D estinations 1 Select the NMS 1 field, and type the IP address value of the remo te management station to which you want to send SNMP trap s. 2 Under t ...

  • Lucent Technologies AC 60 - page 150

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Concen trator s ystems ov er an Eth ernet network. See th e appe ndix “Configuring I n-Band Manage ment.“ Three basi c methods for configu ration are possib le: • Direct connectio ...

  • Lucent Technologies AC 60 - page 151

    255-700-0 25 4-23 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Before cr eating an SVC connection, y ou need to set up the Unix workstation as the ARP server , and each of the Access Concentrator s ystems. T o do this, perform the step s in the fo ...

  • Lucent Technologies AC 60 - page 152

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 7 Enter the Address Prefix . This i s the Addr ess Prefix of the node addres s of the OC-3 c module. 8 Configure the ILMI interf ace. (This is an optional step , but strongly recommende ...

  • Lucent Technologies AC 60 - page 153

    255-700-0 25 4-25 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement 2 Select the In-Band Management option and pre ss Enter . The In-Band Ma nagement Configuration Window displays (see Figure 4-16) . Figur e 4-15. Site-Speci fic Window Figur e 4-16. In ...

  • Lucent Technologies AC 60 - page 154

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: 3 In the In-Band Manageme nt Configuration window , enter the IP addres s and IP Mask for the PSAX device. Note: This ...

  • Lucent Technologies AC 60 - page 155

    255-700-0 25 4-27 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 4 - 6 . Figur e 4-17. In-Band Managem ent Configuration Window (SVC an d ARP Ena ...

  • Lucent Technologies AC 60 - page 156

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 6 Select the Apply Configuration command and press Enter . End 7 Select the In-Band Mgmt Route Table command and press Enter . The Inband Ma nagement Route T able window is displayed (s ...

  • Lucent Technologies AC 60 - page 157

    255-700-0 25 4-29 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: 8 Select the Add a new route command and p ress Enter . The Inband Management Route Configuration window displays (se ...

  • Lucent Technologies AC 60 - page 158

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Note: At the time of initial setup, the In-B and Management T able window is empty . After you have set up routes, this window displays all the routes of this type in the system. 9 Sele ...

  • Lucent Technologies AC 60 - page 159

    255-700-0 25 4-31 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement The route is now adde d. 12 Select the Go Back to Route Table command and pr ess Enter The Inband Ma nagement Route T able window displays with the new route a dded (see Figure 4-20) . ...

  • Lucent Technologies AC 60 - page 160

    Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Viewing In-Band Stat isti cs Da ta T o view the In- Band Management Interface St atistics windo w , return to the In-Ban d Manageme nt Config uration w indow (see Figure 4- 16), and se ...

  • Lucent Technologies AC 60 - page 161

    255-700-0 25 4-33 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: Field Descriptions The statistics in this w indow are des cribed in T able 4-8. Figur e 4-21. In-Band Managem ent Int ...

  • Lucent Technologies AC 60 - page 162

    Chapter 4 Configuring the Basic System Using the Equ ipment Config uration Window 4-3 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 En d Deleting an In-Band Management SV C Route Perform the step s in the follow ing procedure to delete an In-Band SVC route . Begi n Deleti ng an In -Band SV C Route 1 In the ...

  • Lucent Technologies AC 60 - page 163

    255-700-0 25 4-35 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Using the Eq uipment Configurati on Window The Equ ipment Co nfiguratio n window is display ed (see Fi gure 4-22 ). The Equipment Configuration window displ ays the following: ~ All the input/ output (I /O) and se rve ...

  • Lucent Technologies AC 60 - page 164

    Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Cloc k T iming 4-3 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Configuring the Stratum 3–4 Clock Timing Data and voice transmit most efficiently (with t he least amount of cells lost per second) i f a proper clo ck timing source is p ...

  • Lucent Technologies AC 60 - page 165

    255-700-0 25 4-37 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuring the Stratum 3–4 Cloc k Timing The Stratu m Configurat ion window is display ed (see Figure 4-23 ). Note: The [Primary Stratum Mode] an d [Line Timing Status] fie lds indicate the curren t modes of operat ...

  • Lucent Technologies AC 60 - page 166

    Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Cloc k T iming 4-3 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 3 Select the Accuracy field, and press En ter to cycle throu gh the pred efined set of values ( Stratum3 or Stratum4 ). 4 Select the Synchronization Source fiel d, and pres ...

  • Lucent Technologies AC 60 - page 167

    255-700-0 25 4-39 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuring the Stratum 3–4 Cloc k Timing Note: The fol lowing ste ps 5 and 6 in this proced ure apply only if you select the LineTiming value in the Synchronization Source field. W hen you select this value, the Pr ...

  • Lucent Technologies AC 60 - page 168

    Chapter 4 Configuring the Basic System Configuri ng I/O and Server Modu les 4-4 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 2 Press E nter . The value displa yed in the [Line Timing Status] field is changed. Configuring I/O an d Server Modules Once the Stratum 3–4 clock timing has been configured, I/O ...

  • Lucent Technologies AC 60 - page 169

    255-700-0 25 4-41 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration PNNI System-Wide Conf iguration For an ov erview o f PNNI an d the PNNI fea tures sup ported on the AC 60 system, see the section abo ut PNNI in Chapter 3. T o configure a PNNI node for ...

  • Lucent Technologies AC 60 - page 170

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands in this window have the following functions: The other commands on this s creen provid e read-only informati on to assist in monitoring PNNI status. Figur e 4-25 ...

  • Lucent Technologies AC 60 - page 171

    255-700-0 25 4-43 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 3 Select the PNNI Node Configuration command and press Enter . The PNNI Node T able window is displayed ( see Figure 4- 26). • PN NI Map L ink Infor - mation Displays the mapping for t ...

  • Lucent Technologies AC 60 - page 172

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: 4 Select Add Node Entry and pres s Enter . The PNNI No de Config uration w indow is dis played (see Figure 4 -27). F ...

  • Lucent Technologies AC 60 - page 173

    255-700-0 25 4-45 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands on this window have the following functions: Field Descriptions 5 Select the values for the fields on this window from the values given in Ta b l e 4 - 1 3 . Figur ...

  • Lucent Technologies AC 60 - page 174

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 4-13. Field V alues for the PNNI Node Configuration Window Field Na me V alu es Descript ion Node Inde x 00000 (default); Range: 1–65535 The node index identifies a logical P ...

  • Lucent Technologies AC 60 - page 175

    255-700-0 25 4-47 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Node Lowe st T rue (defa ult), False Specifies the root node (true if the current node is ro ot). Select True for this field. Note: It is recommended that you use the default value of Tr ...

  • Lucent Technologies AC 60 - page 176

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 6 Select the Create Node Entry command and press Enter . The Nod e entry is created an d the Node I d field is displayed t he node identifier o f your AC 6 0 system. 7 Select the Brin ...

  • Lucent Technologies AC 60 - page 177

    255-700-0 25 4-49 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Configuration window . The following p rocedure is not necessa ry to follow unless you want t o advertise th e reachable add resses that the s ystem cannot learn or automa tically detect ...

  • Lucent Technologies AC 60 - page 178

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 Select the Add Route Address Entry command. The PNNI Route Address Configuratio n window is displayed (see Figure 4-29) . Commands The commands in this window have the following fun ...

  • Lucent Technologies AC 60 - page 179

    255-700-0 25 4-51 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 Select the values for the fiel ds in this window as described in T able 4-14 . • View Metrics T able Displa ys the PNNI Met rics T able window . • Go B ack to Pr ...

  • Lucent Technologies AC 60 - page 180

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Address Inde x 1 (default) This number r eferences an entry in a table tha t keeps trac k of which nodes can access which prefixes. Addr ess T ype E xterio r (defau lt) The type of co ...

  • Lucent Technologies AC 60 - page 181

    255-700-0 25 4-53 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 Press Ctrl+ A to Create Route Address Entry . The route is completed. 7 Using the instructions in the appropria te PacketStar™ M odule User Guide , configure a s econd port with the ...

  • Lucent Technologies AC 60 - page 182

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands in this window have the following functions: 2 Select the Add Metrics Entry command. The PNNI Met rics Configurat ion window is disp layed (see Figure 4-31). Fig ...

  • Lucent Technologies AC 60 - page 183

    255-700-0 25 4-55 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands in this window have the following functions: Field Descriptions 3 Select the values for the fiel ds in this window as described in T able 4-15 . Figur e 4-31. PNNI ...

  • Lucent Technologies AC 60 - page 184

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 4-15. Field V alues for the PNNI Metrics Configuration Window Field Na me V alu es Descript ion Node Index 0 ( default) Range: 1–6553 5 The uniqu e identifie r for this n ode ...

  • Lucent Technologies AC 60 - page 185

    255-700-0 25 4-57 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 4 Select the Create Metrics Entry command. This ent ry is added t o the PNN I Metrics T able windo w . 5 If you are making chan ges to a n e xisting metric configuratio n, sele ct the Ap ...

  • Lucent Technologies AC 60 - page 186

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Begi n Summary Ad dress Configu ration 1 On the Console Interface Main Menu, select the Site-Specific Configuration option, and pre ss Enter . The Site-Specific Menu is displayed. 2 S ...

  • Lucent Technologies AC 60 - page 187

    255-700-0 25 4-59 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 4 Select the Add Summary Address Entry command. The PNNI S ummary Addre ss Entry window is di splayed (s ee Figure 4-33) . Commands The commands in this window have the following functio ...

  • Lucent Technologies AC 60 - page 188

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Field Descriptions 5 Select the values for the fiel ds in this window as described in T able 4-16 . 6 Select the Create Summary Address Entry co mmand. This ent ry is added t o the PN ...

  • Lucent Technologies AC 60 - page 189

    255-700-0 25 4-61 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration management to map port identifie rs from the nodes at both ends to the link between the m. The PNNI M ap Link table is read-only , reflecting the fac t that the map is discover ed dynami ...

  • Lucent Technologies AC 60 - page 190

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The Originating Node Identifier is the no de identif ier of the no de whose connectivity within itself or to o ther nodes is being de scribed. The Org Port Id is the p ort identifier ...

  • Lucent Technologies AC 60 - page 191

    255-700-0 25 4-63 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 The values for the fields in this window are describ ed in T able 4-17 . Command F unction • View Metrics T ables Displays the PNNI Me trics Configura tion window ...

  • Lucent Technologies AC 60 - page 192

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 6 T o view the Me trics table, select View Metrics Tables and press Enter . The Met rics T able w indow is displayed ( see Figure 4-30). 7 T o return to the M ap Link T able window , ...

  • Lucent Technologies AC 60 - page 193

    255-700-0 25 4-65 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Sys tem-W ide Config uration window is di splayed (s ee Figure 4-25) . 3 Select the PNNI Link Information command. The PNNI L ink T able window is displayed (see Figure 4-36). T ...

  • Lucent Technologies AC 60 - page 194

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 If a node has been created, select the node for which you want t o view information and press Enter . The PNNI Link Confi guration wi ndow is d isplayed ( see Figur e 4-37). Command ...

  • Lucent Technologies AC 60 - page 195

    255-700-0 25 4-67 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration [Link V e rsion] (display only ) V ersion1p oint0 Unknown For horizontal and outside links between lo west-level nodes a nd for links of unknown type, this attribute indicates the versio ...

  • Lucent Technologies AC 60 - page 196

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 [Re mote Po rt Id] (display only ) (Numeri cal data) Indicates t he port ide ntifier of t he port at the remote end o f the l ink as assigned by the re mote node. If "outsideLink ...

  • Lucent Technologies AC 60 - page 197

    255-700-0 25 4-69 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Link T able window , Go Back to Previo us Screen a nd press E nter . The Link T able window is disp layed (se e Figure 4-36). End [Common Peer Gp Id] (display only ) ...

  • Lucent Technologies AC 60 - page 198

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Viewing the PNN I Neighbor Peer T able The PNNI Neighbor Pe er table contains all the attributes necessary to d escribe the relationship a node in the PSAX system has with a ne ighbor ...

  • Lucent Technologies AC 60 - page 199

    255-700-0 25 4-71 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Neighb or Peer T able window displays the node index and neighbor peer re mote node index for various n eighbo r peers. The PNNI Neighbor Peer Remote Node Id is t he node identi ...

  • Lucent Technologies AC 60 - page 200

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Field Descriptions 5 The values for the fields in this window are describ ed in T able 4-19 . Command F unction • Go B ack to Previous Screen Displays the PNNI System-W ide Configur ...

  • Lucent Technologies AC 60 - page 201

    255-700-0 25 4-73 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Link T able window , Go Back to Previo us Screen a nd press E nter . The Neigh bor Peer T able window is dis played (se e Figure 4- 38). End Viewing PNNI Sys tem Stat ...

  • Lucent Technologies AC 60 - page 202

    Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands in this window have the following functions: Field Descriptions The fie lds in this window are described in T able 4-20 . Figur e 4-40. PNNI System Statis tics W ...

  • Lucent Technologies AC 60 - page 203

    255-700-0 25 4-75 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration T able 4-20. Field V alues for the PNNI S ystem Statis tics Window Field Name Description [Dtl Count Originato r] The tota l number of d esignated transit list (DTL ) stacks tha t the AC ...

  • Lucent Technologies AC 60 - page 204

    Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-7 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 End Configuring Call Control Resour ce Alloc ation Perform t he step s in the fol lowing proced ure to confi gure the call contro l resour ce alloca tions fo r your Ac ce ...

  • Lucent Technologies AC 60 - page 205

    255-700-0 25 4-77 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Setting the Configuration V alues Begi n Alloca ting Call Resou rces 1 From the Cons ole Interface Ma in Menu, select Sit e-Specific Configu ration. The Site-Speci fic ...

  • Lucent Technologies AC 60 - page 206

    Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-7 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: Configuration Guidelines Note: Read the follo wing configuration guidelines before you enter values in ...

  • Lucent Technologies AC 60 - page 207

    255-700-0 25 4-79 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Note: The va lue for svcPointToMultiPointParties mus t be greater than or equal to the va lue for svcPointToMultiPointCalls , because each point-to- multipoint call mus ...

  • Lucent Technologies AC 60 - page 208

    Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 svcPointT oMulti PointPar ties Default: 002000 The tot al number o f parties on SVC point-to-multipoint calls to be supporte d by the P SAX syste m. spvcC ePointT o Point ...

  • Lucent Technologies AC 60 - page 209

    255-700-0 25 4-81 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation 4 T o a ppl y the v alues you have enter ed, s elec t the Apply Configuration command and pre ss Enter . Once you modify a configuration and click Apply , the changes a ...

  • Lucent Technologies AC 60 - page 210

    Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 En d Saving the Configuration and Rebooting the System Perfor m the steps in the follo wing pr ocedure to s ave the va lues you ha ve s et, and r eboot the A ccess Concen ...

  • Lucent Technologies AC 60 - page 211

    255-700-0 25 4-83 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation The Remote Re boot Configura tion window is displayed (se e Figure 4-44) . 6 Select the Reboot Chassis command and press En ter . The C PU modu le(s) , and I /O and ser ...

  • Lucent Technologies AC 60 - page 212

    Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ! CAUTION: If you lose p ower or your curr ent session ends abnormally while you ar e in t he pr ocess of configuring the system, and you have not yet saved the values pe ...

  • Lucent Technologies AC 60 - page 213

    Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 255-700-0 25 5-1 5 Using System Diagnostics Overview o f This Chapter The PSAX s ystem diagnostics functions gi ve you the ability to: • V iew the status of the PS AX system inc luding: ~ V ersion of the PSAX system software currently running ~ Status of the hard disk on t ...

  • Lucent Technologies AC 60 - page 214

    Chapter 5 Using System Di agnostics Viewin g System Status 5-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The Diagno stics Men u window is dis played (s ee Figure 5 -2). Figur e 5-1. Console Interfac e Main Menu Window (Diagno stics Option Selected) Figur e 5-2. Diagnostics Menu Window ...

  • Lucent Technologies AC 60 - page 215

    255-700-0 25 5-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Viewi ng System Statu s 2 Select the System Information optio n and press En ter . The System Informati on window is displayed (see Figure 5-3 ). Commands The commands on this window have the following functions: Field Des ...

  • Lucent Technologies AC 60 - page 216

    Chapter 5 Using System Di agnostics Viewin g System Status 5-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 5-1. Field V alues for th e System Information Window Field Name Description [Softw are V ersion] (display only ) The ver sion of the system software currently running on the CPU. [Current Time ...

  • Lucent Technologies AC 60 - page 217

    255-700-0 25 5-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Diagnostics End Running Cell T est Diagnostics T o determine whethe r a port is operating correctly , perf orm the steps in the following procedure . Cell Test Diagnostics Begi n Runnin g Cell T ests 1 ...

  • Lucent Technologies AC 60 - page 218

    Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-6 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The Cell T est Diagnosti cs window is disp layed (se e Figure 5-4 ). Commands The commands on this window have the following functions: Field Descriptions 3 T o se t up a connection for the por ...

  • Lucent Technologies AC 60 - page 219

    255-700-0 25 5-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Diagnostics 4 Select the Apply Test Parameters command and press Enter . T able 5-2. Field V alues for the Cell T est Dia gnostics Window Field Nam es V alues Description Slot Ra nge: Th e total number ...

  • Lucent Technologies AC 60 - page 220

    Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-8 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The Cell T est Payload Configuration w indow is displa yed (see Figure 5-5). Commands The commands on this window have the following functions: Figur e 5-5. Cell T est Payload Configuration Win ...

  • Lucent Technologies AC 60 - page 221

    255-700-0 25 5-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Diagnostics Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 5 - 3 . 6 Select the first line in the Transmitted Payloa d field and enter numbers in ...

  • Lucent Technologies AC 60 - page 222

    Chapter 5 Using System Di agnostics Rebooti ng PSAX Hardwa re Compo nents 5-1 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 7 Select the Refresh Transmit Payload command and press Enter . This comma nd applies the values for the test payload. 8 Select the Send Payload Once or the Send Payload Continuously ...

  • Lucent Technologies AC 60 - page 223

    255-700-0 25 5-11 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Rebooting PSAX Hardwa re Comp onents The Rem ote Reboot Configurat ion windo w is displa yed (see Figure 5-6). 3 Select one o f the commands shown in the follow ing table as ne eded and press E nter . Figur e 5-6. Remote ...

  • Lucent Technologies AC 60 - page 224

    Chapter 5 Using System Di agnostics Removin g Configuration File s 5-1 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 End Removing Con figuration Files T o remove configuration files, use the steps in the follo wing procedure, starting a t the Conso le Interface Main Menu wind ow (see Figure 5-1). Removing ...

  • Lucent Technologies AC 60 - page 225

    255-700-0 25 5-13 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Unlock ing a T elnet Session Are you sure that you want to remove al l the configuration files? (y/n) 3 Answer y to remove the files or n to cancel. En d Unlocking a T elnet Session Once in a while, a lockup condition of ...

  • Lucent Technologies AC 60 - page 226

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 T ype the IP addr ess of the AC 60 syste m that is connecte d to the locked- up telnet session in the IP Address fie ld, and press Enter . 5 Select the Unlock Remote S ...

  • Lucent Technologies AC 60 - page 227

    255-700-0 25 5-15 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) • The firs t port is ass igned to the near -end user . • The second port is assigned to the far -end user , using the same configuration as the first port. Begi n Crea ...

  • Lucent Technologies AC 60 - page 228

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 2 On the Connection Configuration window , select the Circuit Emulation-to-ATM VCC configuration and p ress Enter . The Ci rcuit Emulat ion-to A TM VC C PVC T a ble Wind ...

  • Lucent Technologies AC 60 - page 229

    255-700-0 25 5-17 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: At the time of initial insta llation, the Circuit Emulation-to-A TM VCC PV C T able window is empty . After you have set up connections, this window displays all the ...

  • Lucent Technologies AC 60 - page 230

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Display Fields The displ ay fields on t his window provide the following information about all the circuit emulation-to-A T M VCC PVC connect ions in the Access Concen t ...

  • Lucent Technologies AC 60 - page 231

    255-700-0 25 5-19 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions 4 Select the values for the fields on this window from the values given in Ta b l e 5 ...

  • Lucent Technologies AC 60 - page 232

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able 5-4. Field V alues for t he Circuit Emulation-to-A TM VCC PVC Connection Window Field Nam es V alues Descri ption Circuit Emula- tion Int erface The circuit emula ...

  • Lucent Technologies AC 60 - page 233

    255-700-0 25 5-21 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Vo i c e Compre ssion None (default), G726-16k, G726-24k, G726-32k, G726-40k, G729a-8k If you want data traffic f or this connec- tion to be processed t hrough th e DSP2A, ...

  • Lucent Technologies AC 60 - page 234

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Conformance Ty p e The type of traffi c control option used for A TM cell s. The traff ic descriptor combination specifies which tra ffic parameters are used fo r traffi ...

  • Lucent Technologies AC 60 - page 235

    255-700-0 25 5-23 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Servi ce T ype Ubr (defau lt) Vbr-nrt2, Vbr-nrt1, Vbr -rt 2, Vbr -rt 1, Vbr-expres s Cbr -4, C br -3, Cbr -2, C br -1 Access Con centrato r system-s upported quality of se ...

  • Lucent Technologies AC 60 - page 236

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 5 In the Circuit Emulation Interface section of the window , add the the slot, port , and channel designat ions for the ne ar end user from your circuit emulation module ...

  • Lucent Technologies AC 60 - page 237

    255-700-0 25 5-25 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions The values for the fields on this window are described in T a ble 5-5. Figur e 5-12. ...

  • Lucent Technologies AC 60 - page 238

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Slot V a riable depending on the chas sis type Enter the slot numb er containing the module for which you are creating a connection. Enter slot numbers for both sides of ...

  • Lucent Technologies AC 60 - page 239

    255-700-0 25 5-27 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: T o vie w statist ics for the fa r end user , select Display Stats for Next Connection . The Circuit Emulatio n-to-A TM VCC PVC Statistics windo w is displayed with ...

  • Lucent Technologies AC 60 - page 240

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: Field Desciptions 3 Se lect the val ues from the fields on this window from T able 5-6. Figur e 5-13. ...

  • Lucent Technologies AC 60 - page 241

    255-700-0 25 5-29 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) 4 Select the Apply Configuration command and press Enter . En d OAM Activation and Deactivati on The OAM Activate and Deactivate option can perform continuity checks on th ...

  • Lucent Technologies AC 60 - page 242

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Activating and Deactivating O AM Begi n Activa ting or De activatin g OAM 1 On the Console Interfa ce Main Menu window , select the Diagnostics option and press Enter. T ...

  • Lucent Technologies AC 60 - page 243

    255-700-0 25 5-31 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) T able 5-7. Field V alues for the OAM Activation-De activation Window Field Na me V alu es Descript ion Connectio n Interface Panel Slot Default: 0 The module slot number ...

  • Lucent Technologies AC 60 - page 244

    Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 T o begin the test , select the Activate command a nd press Enter . 5 T o terminate the test, select the Deactivate command and press Enter . En d ...

  • Lucent Technologies AC 60 - page 245

    Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 255-700-0 25 6-1 6 Using VT100 T erminal Emulation Overview o f This Chapter VT100 terminal emula tion is used in configuring and managing the AC 60 sy s t em fr o m t he se r ia l in te r f ac e p o rt la be l e d CO N SO L E on t he fa c ep l at e . Th e Packe tStar ™ Ac ...

  • Lucent Technologies AC 60 - page 246

    Chapter 6 Using VT100 T erminal Emulati on Setting Up The Windows 3.1 T erminal Em ulator 6-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 8 Select OK . 9 Return to t he Settings Me nu. 10 From the Set tings Menu, sel ect the Communications option. 11 Select the settings in T able 6-2 for each option. 12 Sel ...

  • Lucent Technologies AC 60 - page 247

    255-700-0 25 6-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 6 Using VT1 00 T e rminal Emulation Setting Up The W indows 95 H yperT erminal Emu lator Setting Up The Win dows 95 HyperT erminal Emu lator T o configure VT100 terminal emulation using the Windows 95 HyperT erminal emulator , use the setting s in T ...

  • Lucent Technologies AC 60 - page 248

    Chapter 6 Using VT100 T erminal Emulati on Setting Up a U.S. Robo tics-Compatible M odem 6-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Setting Up a U.S. Ro botics-C ompatible Modem T able 6 -5 shows the list of comma nds to confi gure the mode m on your computer to the AC 60 for interoperability . W ARNIN ...

  • Lucent Technologies AC 60 - page 249

    255-700-0 25 6-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Chapter 6 Using VT1 00 T e rminal Emulation Setting Up a U.S. Rob otics-Compatib le Modem AtQ1 sets quiet mode, no re sult codes At&W0 writes current configuration to NV RAM 0 template T able 6-5. Modem Set-Up Co mmands For a Modem Connected to a Remote ...

  • Lucent Technologies AC 60 - page 250

    Chapter 6 Using VT100 T erminal Emulati on Setting Up a U.S. Robo tics-Compatible M odem 6-6 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ...

  • Lucent Technologies AC 60 - page 251

    Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 255-700-0 25 7-1 7 Upgrading, Restoring, and Backing Up System Softwar e and Firmwar e Overview o f This Chapter This chapter des cribes how to upg rade, back up, and r estore the Access Concentr ator syste m software an d firmware . Note: If the syst em software releas ...

  • Lucent Technologies AC 60 - page 252

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Over view of This Chapter 7-2 255-700-025 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 ~ Restoring database fil es using XMod em/YMod em file transfe r (see ”Restoring Database File s Using XMod em/YMode m File T ransfer” on page 7- 32 ...

  • Lucent Technologies AC 60 - page 253

    255-700-0 25 7-3 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Overvi ew of This Cha pter ~ T ransferrin g the s oftware u pgrade files t o the C PU hard dis k Note: Upgrading the software on yo ur Access Concentrat or syst em affec ts its ...

  • Lucent Technologies AC 60 - page 254

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Over view of This Chapter 7-4 255-700-025 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 • Serv-U fr om http://www .ca t-soft.com • Wftpd23 4 from http://www .shar eware.com I f y o u p l an to us e a s h a r e w a r e p r o g r a m , yo ...

  • Lucent Technologies AC 60 - page 255

    255-700-0 25 7-5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Overvi ew of This Cha pter Begi n Upgrading Syst em Software Usin g F TP 1 From the Console Interf ace Main Menu window (see Figure 7-2), select the Software V e rsion Configura ...

  • Lucent Technologies AC 60 - page 256

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Over view of This Chapter 7-6 255-700-025 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 The Software V ersion Configuration window (see Figure 7-3) is displayed. 2 Select the F TP S oftware Release D istribut ion option a nd press E nter . ...

  • Lucent Technologies AC 60 - page 257

    255-700-0 25 7-7 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Overvi ew of This Cha pter Commands The commands on the SRD Download Configuraton window have the following functions: Field Descriptions 3 Select the values for the fields on t ...

  • Lucent Technologies AC 60 - page 258

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Over view of This Chapter 7-8 255-700-025 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 4 After entering the values in the SRD Download Configuration window , complete the do wnload by compe ting these steps: 5 Select the Start SRD Download ...

  • Lucent Technologies AC 60 - page 259

    255-700-0 25 7-9 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgradin g Using XMod em/YModem File T ransfer Method 8 On the bottom of the window , the following message is displayed: Are you sure that you want to upgrade the software? (y/ ...

  • Lucent Technologies AC 60 - page 260

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Using XModem/YM odem File T ransfer Method 7-1 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 a. If you are using an exter nal modem, conn ect a cable from the EIA- 232 i nterfa ce po rt on th e PC workst ation to t ...

  • Lucent Technologies AC 60 - page 261

    255-700-0 25 7-11 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgradin g Using XMod em/YModem File T ransfer Method The Softwa re V ersion Configur ation window (see Figure 7-5 ) is displayed. 3 On the Software V ersion Configuration wind ...

  • Lucent Technologies AC 60 - page 262

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Using XModem/YM odem File T ransfer Method 7-1 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Note: For the upgrade softwa re proces s, use only the Receive Options panel. Commands The commands on this window have t ...

  • Lucent Technologies AC 60 - page 263

    255-700-0 25 7-13 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgradin g Using XMod em/YModem File T ransfer Method T able 7-2. Field V alues for t he XMODEM/YMODEM File T ransfer Window (Receive O ptions Panel)—Upgra ding with Softwa r ...

  • Lucent Technologies AC 60 - page 264

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Using XModem/YM odem File T ransfer Method 7-1 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Note: W e recommend that you use eith er the YMo dem or the YModem- G protocol . Use the XM odem protoco l if that is the ...

  • Lucent Technologies AC 60 - page 265

    255-700-0 25 7-15 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgradin g Using XMod em/YModem File T ransfer Method out of view . A message is displayed indicating that yo u can cancel the transfe r by pressing Ctrl+X seve ral times. A se ...

  • Lucent Technologies AC 60 - page 266

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Firmwar e 7-1 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Upgrading Firmw ar e Access Con centrato r I/O and server m odules re leased with Access Concen trator 6 .0.0 softwa re release are supp orted by the Firm ...

  • Lucent Technologies AC 60 - page 267

    255-700-0 25 7-17 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgrading Firmware The Access Co ncentrator syste m selects only th e default drive r when the I/O or server mod ule initializes for the first time. When s electing the version ...

  • Lucent Technologies AC 60 - page 268

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Firmwar e 7-1 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Upgrading I/O and Se rver Module Firmwar e Begi n Steps to Upgrade I/O and Server Module Firmware 1 On the Console Interfa ce Main Menu window , select th ...

  • Lucent Technologies AC 60 - page 269

    255-700-0 25 7-19 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgrading Firmware The Softwa re V ersion Configur ation window (see Figure 7-9 ) is displayed. 2 Select the Firmware Version Control optio n. Figur e 7-9. The So ftware V ersi ...

  • Lucent Technologies AC 60 - page 270

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Upgradin g Firmwar e 7-2 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 The Firmwar e V ersio n Control windo w (see Fi gure 7-10) is displayed. Commands The commands in this window have the following functions: Field Descript ...

  • Lucent Technologies AC 60 - page 271

    255-700-0 25 7-21 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Upgrading Firmware 3 Under the NextVersion field, select the driver that rep resents the version of the firmwar e you want to download onto the module, and press Enter . Pressi ...

  • Lucent Technologies AC 60 - page 272

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Falli ng Back to the Pr evio us Softwar e Rel ease 7-2 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 download time, you must select the Start Upgrade command on the Firmw are V ersion Co ntrol window . ~ If you wish to insta ...

  • Lucent Technologies AC 60 - page 273

    255-700-0 25 7-23 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Fallin g Back to th e Pre vious So ftwar e Relea se The Softwa re V ersion Configur ation wind ow (see Figur e 7-11) is displayed. 2 Select the Fallback to Previous Version opt ...

  • Lucent Technologies AC 60 - page 274

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Backin g Up Syst em Datab ase Files 7-2 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Backing Up Sys tem Database Files W e recommend that y ou back up your system, module, and co nnection configuration databa se files to a s ...

  • Lucent Technologies AC 60 - page 275

    255-700-0 25 7-25 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Backing Up Sys tem Database Files Backing Up Database Files Using FTP Begi n Steps to Back Up Data base Files Using F TP 1 Conne ct a standa rd 10Base-T Etherne t cable to the ...

  • Lucent Technologies AC 60 - page 276

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Backin g Up Syst em Datab ase Files 7-2 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 18 Ty p e <bye> and press Ent er . En d Backing Up Database Files Using XModem/YModem File T ransfer Y ou can use the XModem/YM odem ...

  • Lucent Technologies AC 60 - page 277

    255-700-0 25 7-27 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Backing Up Sys tem Database Files Copying the Database Files to a Storage Medium Be gin Steps to Copy Database Files to a Storage Medium 1 Using the ter minal emulator , log on ...

  • Lucent Technologies AC 60 - page 278

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Backin g Up Syst em Datab ase Files 7-2 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 The XMODEM /YMODEM File T ransfer window (see Figure 7-1 3) is displayed. Note: For the database file transfer process, use only the Send O ...

  • Lucent Technologies AC 60 - page 279

    255-700-0 25 7-29 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Backing Up Sys tem Database Files 5 Select the SendFiles command and press Enter . The terminal emulator displaying t he Access Concentrat or system interface window scrolls th ...

  • Lucent Technologies AC 60 - page 280

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Rest oring S ystem D ataba se Files 7-3 0 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Be sure yo u enter the filename of the database fi le exactly so that it matches the name you previously e ntered on the Access Concentrato ...

  • Lucent Technologies AC 60 - page 281

    255-700-0 25 7-31 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Rest oring System Data base Files Restoring Database Files Using FTP Begi n Steps to Restore Databa se Files Using F TP 1 Conne ct a standa rd 10Base-T Etherne t cable to the E ...

  • Lucent Technologies AC 60 - page 282

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Rest oring S ystem D ataba se Files 7-3 2 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 18 Ty p e <bye> and pr ess Enter . En d At this point , you must reboot (re initialize) the Access C oncentrator syste m chassis, so ...

  • Lucent Technologies AC 60 - page 283

    255-700-0 25 7-33 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Rest oring System Data base Files Setting Up for the File Transfe r Process Begi n Steps to Set Up for the File T ran sfer Process 1 Set up the cabling and connect ions between ...

  • Lucent Technologies AC 60 - page 284

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Rest oring S ystem D ataba se Files 7-3 4 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 Note: For th e software upgrad e process, use only th e Receive Options panel. Commands The commands on this window have the following func ...

  • Lucent Technologies AC 60 - page 285

    255-700-0 25 7-35 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Rest oring System Data base Files Note: W e recommend that you use eith er the YMo dem or the YModem- G protocol . Use the XM odem protoco l if that is the only one you have av ...

  • Lucent Technologies AC 60 - page 286

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Rest oring S ystem D ataba se Files 7-3 6 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 out of view . A message is displayed indicating that yo u can cancel the transf er by pre ssing Ctrl+X sever al times. A sec ond me ssage i ...

  • Lucent Technologies AC 60 - page 287

    255-700-0 25 7-37 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Release 6.2.0 Chapter 7 Upgrading, Restoring, and Backi ng Up System Software and Firmware Rest oring System Data base Files This command reb oots (reinitializes) the C PU component, and the I /O and se rver mod ules. En d ...

  • Lucent Technologies AC 60 - page 288

    Chapter 7 Upgrading, Restoring, and Backing Up System Software and Firmware Rest oring S ystem D ataba se Files 7-3 8 255-700-02 5 Packet Star ™ Access Concentrator 60 User’ s Guide , Issue 1 Rele ase 6.2.0 ...

  • Lucent Technologies AC 60 - page 289

    255-700-0 25 A-1 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 A SNMP T rap Messages Overv iew of This Appe ndix This appendix d escribes the SNMP tra p and notification mes sages generated by the Access Concentrator Co nsole Inter face system SNMP agent. Exter nal SNMP managers ca n perform various functions in the Acc ...

  • Lucent Technologies AC 60 - page 290

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The T rap Log D isplay window is displaye d (see Figu re A-2) . T o find a des criptio n of what a trap message means, follow the se steps. 2. Look fo r the message that you want information about ...

  • Lucent Technologies AC 60 - page 291

    255-700-0 25 A-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s cardType , cardProtectionStatus , and cardOperStatus , which are all enume rated -type objects . T able A-1 lists t he ente rprise-spec ific trap n ames and tra p numbers in the four gr oups of ...

  • Lucent Technologies AC 60 - page 292

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 31 pnniNodeCfgN otify 32 pnniNodeCfgFa ilNotify 33 pnniNodeMod FailNotify 34 pnniNodeD elFai lNotify 35 pnniNodeO OSFailNot if 36 pnniNodeISFai lNotify 37 pnniRtA ddrCfgNotif y 38 pnniRtA ddrCfgFai ...

  • Lucent Technologies AC 60 - page 293

    255-700-0 25 A-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s 11 bridgeDomainNumberInvalidNotify 12 signalingModify FailNotify 13 lmiIntfStatusNotify 14 isdnLapdDo wnNotify 15 isdnLapdUp Notify 16 bridgeDomainTimingRelationshipNo tify 17 ts16Usage ModifyFa ...

  • Lucent Technologies AC 60 - page 294

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 46 viprRout ingT r ap 47 viprVpnTrap 48 viprIpIn tfT rap 49 viprSu bChanT rap 50 viprRtSrv T rap 51 atmS vcIntfLaye r2Up 52 atmS vcIntfLa yer2Dow n 53 apsCon figuration ModifyF ailNotify 54 viprSta ...

  • Lucent Technologies AC 60 - page 295

    255-700-0 25 A-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s 25 frFrPvc T ea rDownNoti fy 26 ci rEmCi rEmPv cT earDownN otify 27 vbrV brPvcT earDownNoti fy 28 bridgeBr idgePvcReqFailNo tify 29 bridgeBr idgePvcSetupNotify 30 bridgeBr idgePvcT ea rDownNotif ...

  • Lucent Technologies AC 60 - page 296

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 60 cirEmAtmSpvcVccT earDownNotify 61 vbrAtmSpv cVccT earDo wnNotify 62 atmSpvcVccT earDownNotify 63 oamT e stReqFailNot ify V irtual Interface Even ts (Enterprise Object Identifie r): 219 vi-Cannot ...

  • Lucent Technologies AC 60 - page 297

    255-700-0 25 A-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s T able A -2 on pa ge A-9 prov ides informa tion abou t the SNMP enterprise - specific trap messages, including the following: • Enterprise-specific trap name • T ype of event that caused the ...

  • Lucent Technologies AC 60 - page 298

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-10 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 aal2T runkConfig T earDownNotify Connec- tion Respons e aal2T runkConfigI f aal2T runkConfigVpi aal2T runkConfigVci The PVC V CC AAL2 T runk has been deleted. aal2T runkConfig Setu pNot ify Connec ...

  • Lucent Technologies AC 60 - page 299

    255-700-0 25 A-11 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s atmAtmSpvc- Modify FailNo- tify Inter face Info spvcAddrIfA atmAtmSpvcVccVpiA atmAtmSpvcVccVciA atmAtmSp vcVccRe moteAt- mPortA ddr spvcC onfig Failur eCode Notification that an attempt to mo d ...

  • Lucent Technologies AC 60 - page 300

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-12 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 atmBk- PvcVp cReqF ail- Notify Connec- tion Response at mPvcVpcIfA atmPvcVpcVp iA atmPvcVpcIfB atmPvcVpcVp iB pvcF ailureRe asonCo de The DHPVC VPC backup connection request between an A TM interf ...

  • Lucent Technologies AC 60 - page 301

    255-700-0 25 A-13 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s atmPvcVccSetup Notify Connec- tion Response at mPvcVccIfA atmPvcVccVpiA atmPvcVccVciA atmPvcVccIfB atmPvcVccVpiB atmPvcVccVciB The PVC VC C con- nection between two A T M interf aces has been c ...

  • Lucent Technologies AC 60 - page 302

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-14 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 atmSpvcMo dify- FailNotify Interface Info atmSpvcVccIfA atmSpvcVccVpiA atmSpvcVccVciA spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed. atm- SpvcVccSe ...

  • Lucent Technologies AC 60 - page 303

    255-700-0 25 A-15 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s bridgeAtmBk- PvcVccT ear- DownNotify Connec- tion Response br idgeAtmPvcVccI fA bridgeAtmPvcVccI fB bridgeAtmPvcVccV piB bridgeAtmPvcVccVciB The DHPVC VCC backup connection between a bridge int ...

  • Lucent Technologies AC 60 - page 304

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-16 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 bridgeDomain- Full Noti fy Interface Info bridgeDomainNumber The 15 ports avail- able for the bridge domain are being used, leaving no space for an ad di- tional p ort. bridgeDomain- InService Not ...

  • Lucent Technologies AC 60 - page 305

    255-700-0 25 A-17 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s ceServiceT ype- Modify FailNo- tify Interfa ce Info p ortId interface FailureReasonC ode Indicates that config- uring unstructured CE failed. Possib le reasons: (1) The port has been channelize ...

  • Lucent Technologies AC 60 - page 306

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-18 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 cirAtmSpvc- Modify FailNo- tify Inter face Info spv cAddrIfA cirAtmSpvcVccRemote- CePor tAddr spvcC onfig Failur eCode Notification that an attempt to mo dify a CE SPVC endpo int has failed. cirAt ...

  • Lucent Technologies AC 60 - page 307

    255-700-0 25 A-19 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s cirEmAt- mPvcVccReq- FailNotify Connec- tion Response cirEmAtmPvcVccIfA cirEmAtmPvcVccIfB cirEmAtmPvcVccVpiB cirEmAtmPvcVccVciB pvcF ailureRe asonCo de The PVC VC C con- nection request between ...

  • Lucent Technologies AC 60 - page 308

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-20 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 cirEmSpvcCon- figFailN otify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to configur e an endpoint as CE SPVC en dpoint ha s failed. cirEmSpvcCon- fig ured ...

  • Lucent Technologies AC 60 - page 309

    255-700-0 25 A-21 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s differ entSystem- Soft wareN otify Syst em Critic al pr imarySo ftwareV ersio n bac kupSoftw areV er sion Indicates that the primar y and backup CPU m odul es are running different ver si ons o ...

  • Lucent Technologies AC 60 - page 310

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-22 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 frAtmB k- PvcVccSetupNo- tify Connec- tion Response f rAtmPvcVccIfA frAtmPvcVccDlciA frAtmPvcVccIfB frAtmPvcVccVpiB frAtmPvcVccVciB The DHPVC VCC backup connection betwee n a fr ame relay interfac ...

  • Lucent Technologies AC 60 - page 311

    255-700-0 25 A-23 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s frFrP vcT ear- DownNotify Connec- tion Respo nse frFrP vcIfA frFrPv cDlciA frFrPv cIfB frFrPv cDlciB The PVC connection between two frame- relay in terface s has been del eted. frAtmSpvcC on- f ...

  • Lucent Technologies AC 60 - page 312

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-24 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 imaGrpChan- nelCle aredNo- tify Interfa ce Info imaGrpChanne lId imaGrpChanne lStatus The imaGrpChan- nelClearedNotify trap indicate s a fail- ure has been cleared in an IMA group. The imaGrpChan- ...

  • Lucent Technologies AC 60 - page 313

    255-700-0 25 A-25 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s interfaceC reat- edNot ify Interfa ce Info interfaceIndex interfaceT ype Notification that an interfa ce has be en created. interfaceC reate- FailNotify Interfa ce Info interfaceIndex interface ...

  • Lucent Technologies AC 60 - page 314

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-26 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ipAtmApp- PvcVccSetupNo- tify Connec- tion Response ip AtmAppPvcVccDest AddrA ipAtmAppPvcVccSubnet- MaskA ipAtmAppPvcVccIfB ipAtmAppPvcV ccVpiB ipAtmAppPvcVccVciB The PVC VC C con- nection between ...

  • Lucent Technologies AC 60 - page 315

    255-700-0 25 A-27 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s isdnLapd UpNo- tify Interfa ce Info interfaceIndex isdnIntfDChanId This trap indicates that LAPD is func- tional o n the speci- fied ISDN interface . keepA liveT imer- ExpiredInLl- DownState No ...

  • Lucent Technologies AC 60 - page 316

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-28 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 lmiDlciStatus- Notify Connec- tion Respo nse interfaceI ndex d1ci Numbe r lmiDlciOperStatus Indicates the end-to- end s tatus of the PVC of which t his DLCI is a segme nt . lmiIntfStatusNo- tify I ...

  • Lucent Technologies AC 60 - page 317

    255-700-0 25 A-29 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s muxReady Con- firm Rec eive d- Notify System Info < NO OBJECTS > Indicates that the MUX (the Access Conc entrator sys- tem ) ha s receive d a MUX_ READY_ CONF messag e in re sponse to the ...

  • Lucent Technologies AC 60 - page 318

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-30 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 oldStra tum- CardN otify System Critical < NO OBJECTS > This trap indi cates that the primary stratu m card doe s not support this mode of op eration being applied in the stratum configura- ...

  • Lucent Technologies AC 60 - page 319

    255-700-0 25 A-31 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s pnniN odeMod- FailNotify Syst em Info swtchNodeI ndx pnniC ode Indicates that a PNNI Node Modifica tion has failed. pnniNodeOOS - FailNotify Syst em Info swtchNodeI ndx pnniC ode Indicates that ...

  • Lucent Technologies AC 60 - page 320

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-32 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 pnni RtAd- drModFa ilNotify Syst em Info swtchNodeI ndx interfaceI ndex pnniC ode Indicates that a PNNI Route Ad dress Mod i- fication has faile d. port Modi fyFa il- Notify Modul e Info port Id p ...

  • Lucent Technologies AC 60 - page 321

    255-700-0 25 A-33 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s snmpCommuni- tyString- sChanged T oPubl icNotify System Crit ical < NO OBJECTS > An error h as been detected in the agt.pty file and the community str ings have be en changed to be public ...

  • Lucent Technologies AC 60 - page 322

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-34 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 tasC mprsAn n- ceNotify System Info tasCmprsAnnceRe asonCode Indicates the result of the requested compress announce- ment op eration. tasT stLineNot ify System Info tasT stLine ReasonCod e Indica ...

  • Lucent Technologies AC 60 - page 323

    255-700-0 25 A-35 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s vbrAtmPvcVc- cReqFailNotif y Connec- tion Respon se vbrAtmPvcVccIf A vbrAtmPvcVcc IfB vbrAtmPvcVcc VpiB vbrAtmPvcVccVciB pvcF ailureRe asonCo de The PVC VC C con- nection request between a vari ...

  • Lucent Technologies AC 60 - page 324

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-36 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 vbrAtmSpvc- SetU pNoti fy Connec- tion Respons e spvcAddr IfA vbrAtmS pvcRe moteVb rPor- tAddr vbrAtmSpvcIfB vbrAtmSpvcVpi B vbrAtmSpvcVciB Notification that a SPVC connection betwee n TE and A T ...

  • Lucent Technologies AC 60 - page 325

    255-700-0 25 A-37 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s vbrSpv cModify- FailNotify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed. vbrVbrP vcReq- FailNotify Connec- tion ...

  • Lucent Technologies AC 60 - page 326

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-38 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 vi-Alr eady- Exists Connec- tion Info Notification that a virtua l interfa ce assoc iated wit h that numbe r ha s alrea dy been creat ed. vi-Cannot-B e-0 Connec- tion Response Notificati on that V ...

  • Lucent Technologies AC 60 - page 327

    255-700-0 25 A-39 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s vi-Doe s- Not_Exist Connec- tion Response Notificati on that a virtual inte rface con - nection no longer exists. vi-Mod -Limit- Exceeded Indicates that the number of virtual interf aces per ca ...

  • Lucent Technologies AC 60 - page 328

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-40 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 vi-OS- Cannot- Be-0 Indicates that the virtua l interfa ce oversubscript ion cannot be 0. Must be at least 1. vi-OS-OOR Indica tes that t he virtua l interfa ce oversubscript ion is not in the ran ...

  • Lucent Technologies AC 60 - page 329

    255-700-0 25 A-41 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es View ing S NMP T rap Message s vi-Vbr -Bw- Unavailable- Egrs Notification that the request ed amount of egre ss VBR band- width is unavailable for a duplex connec- tion. vi-Vbr -Bw- Unavailable- Egrs -A Notification that the ...

  • Lucent Technologies AC 60 - page 330

    Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-42 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 viprSt atRtT rap I nterface Info vipr Slot$ viprRout erId$vi pr- Rout eId$st atRtSt atus Indicat es success/f ail of Stat ic Route oper- atio ns. viprSub - ChanT rap Interfa ce Info viprSlot$vipr ...

  • Lucent Technologies AC 60 - page 331

    255-700-0 25 A-43 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps Definitions of MIB Objects Used for T raps The following list contains the de finitions of the M IB objects that are associa ted with the SNMP enterprise -specifi c trap names. Thi ...

  • Lucent Technologies AC 60 - page 332

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-44 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 T able A-5. ARP Status Codes atmImaIntfInd ex Interf ace index for the atm I ma interfa ce. Number value is interpr eted as an interface of the form, SSPPCCC, where SS is the module s ...

  • Lucent Technologies AC 60 - page 333

    255-700-0 25 A-45 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps atmPvc VccVciA VCI value for side A of an A TM-to-A TM PVC VCC connection. V alid range is a number be tween 0 and 65 535. atmPvc VccVciB VCI va lue for side B of an A TM-to-A TM P ...

  • Lucent Technologies AC 60 - page 334

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-46 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 bridgeAtmPvcVccIfA Interface ind ex for side A, the bridge side, of a Bridge-to- A T M PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC , where SS ...

  • Lucent Technologies AC 60 - page 335

    255-700-0 25 A-47 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps cardSlot Physical s lot location. V a lid range is a number between 1 and 4. cardType T y pe of module in a physical slot. A specific type of module is associated with each number ...

  • Lucent Technologies AC 60 - page 336

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-48 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 cellTestIfB Inte rface index used for tes ting cell transf er . Number v alue is interp reted as an interfac e of the form, SSPPCCC , where SS is the module slot , PP is the port numb ...

  • Lucent Technologies AC 60 - page 337

    255-700-0 25 A-49 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps cirEmAtmSpvcVccIfB Interfa ce index for side B, the A TM side, of a circuit emulat ion-to-A TM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPC C ...

  • Lucent Technologies AC 60 - page 338

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-50 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 frAtmPvcVccDlciA DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connectio n. V alid range is a number between 0 and 1023. frAtmPvcVccIfA Int erface index fo ...

  • Lucent Technologies AC 60 - page 339

    255-700-0 25 A-51 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps fwRele aseSlot Physical slot location. V a lid range is a number between 1 and 16. imaGrpChann elId Interfa ce inde x - SSPPCCC imaGrpCh annelStatus The return value for the imaGrp ...

  • Lucent Technologies AC 60 - page 340

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-52 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ firmwareOutO fDate: The firmware for the I/O module does not wor k with this inte rface. ~ ts16Fo rData: ts16 has been se t for pas sing data and the user is attempting to turn on s ...

  • Lucent Technologies AC 60 - page 341

    255-700-0 25 A-53 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps interfaceInd ex Interface inde x used for identifcation in tra ps. Number value is interpreted as an interface of the f orm, SSPPCC C, where SS is the module slot, PP is the port n ...

  • Lucent Technologies AC 60 - page 342

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-54 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ipAtmAppPvcVccIfB Interface index for s ide B, the ATM side, of an in-band m anagement A T M connection. Number value is i nterpreted as an interface of the form, SSPPCCC, where SS is ...

  • Lucent Technologies AC 60 - page 343

    255-700-0 25 A-55 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps T able A-16. IP T ype Rea son Codes isdnIntfDChanId D-Channel Number - if the Dchannel number is 0 no LAPD will run on this PRI -ISD N int erfa ce. line Statu s • Bit map of the ...

  • Lucent Technologies AC 60 - page 344

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-56 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ The fo llowing bit m ap table shows line statuses for the DS1/T1 and Enhanced DS1 modules: ~ The following b it map table shows line statuses for the DS3 module: T able A-17. Enhanc ...

  • Lucent Technologies AC 60 - page 345

    255-700-0 25 A-57 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps ~ The following bit map table shows line sta tuses for the Enhanced E1 module: ~ The following bit map table shows line statuses fo r the E3 module: T able A-19. Enhanced E1 Line S ...

  • Lucent Technologies AC 60 - page 346

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-58 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ~ The following bit map table shows line statuses for t he Ethernet module: ~ The following bit map table sho ws line statuses fo r the OC-3c and STM-1 m odules: ~ The following bit m ...

  • Lucent Technologies AC 60 - page 347

    255-700-0 25 A-59 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps ~ The following bit map table sho ws line statuses fo r the V oice 2-Wire Station (2W Source) module: lmiDlciOperStatus The operational statu s of the LMI protocol. V alid ran ge i ...

  • Lucent Technologies AC 60 - page 348

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-60 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 oc3A PSK1K2 Rx Rx K1/K2 followed by hex value of K1, K2 oc3A PSK1K2 Tx Tx K1/K 2 followed b y hex value of K1, K2 oc3A PSPai rPor tInde x APS Pair Port index - SSPP oc3A PSPr otect io ...

  • Lucent Technologies AC 60 - page 349

    255-700-0 25 A-61 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps oc3A PSSel ecto rState W : active/standby P: standby/active V a lid range is either the number 1 or 2. See table below fo r a mapping be tween numbers and their enumerate d type. o ...

  • Lucent Technologies AC 60 - page 350

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-62 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 oc3PortId inte rface i ndex - SSPP percentComple te Used for the tr ap messa ge fileTransferStatusNotify , and the value equals the p ercent of the up grade, downg rade, or F TP do wn ...

  • Lucent Technologies AC 60 - page 351

    255-700-0 25 A-63 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps portFailureRe asonCode Identification of cause for failure in chan ging the parameters of a port. V alid ra nge is either the number 1 or 2. See tabl e below for a mappi ng between ...

  • Lucent Technologies AC 60 - page 352

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-64 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 9 cantUseSignalingChnlEgrsA2B 10 cantUseS ignalingChnlIgrsB2 A 11 cantUseSignalingChnlEgrs B2A 12 cantUseMa nagementChnlIg rsA2B 13 cantUseMa nagementChnlEgrs A2B 14 cantUseMa nagemen ...

  • Lucent Technologies AC 60 - page 353

    255-700-0 25 A-65 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps 46 cnctnDataStructure sUnavailable 47 nu llT raffic Paramete rsRej ectedA2 B 48 nu llT raffic Paramete rsRej ectedB2 A 49 vpiW ithinSvcRangeIgrs A2B 50 vpiW ithinSvcRangeEgrsA2B 51 ...

  • Lucent Technologies AC 60 - page 354

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-66 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 83 scrBandw idthUnavaila bleIgrsB 2A 84 scr BandwidthUnav ailable EgrsB2A 85 pcrBandw idthUnava ilableIg rsA2B 86 pcrBandw idthUnava ilableEg rsA2B 87 pcrBandw idthUnava ilableIg rsB2 ...

  • Lucent Technologies AC 60 - page 355

    255-700-0 25 A-67 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps 120 interfaceB-NotCir cuitEmulation 121 unrec ognizabl eSilence DetectionM ode 122 un recog nizableE choCan cella tion Mode 123 un recogni zableV oiceCompre ssion Mode 124 interfac ...

  • Lucent Technologies AC 60 - page 356

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-68 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 157 unsu pportedFrw dErrCor rectSetti ngs 158 un supp orte dFlow Sett ings 159 frwd ErrCorre ctResource Interna lError 160 uns upported Connect ion 161 ip DestAddr Subnet AInRese rved ...

  • Lucent Technologies AC 60 - page 357

    255-700-0 25 A-69 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps remoteReboo tReason Code The result o f a remot e rebo ot request . V alid ra nge is a number between 1 and 46. See table be low for a mapp ing between numbe rs and their enumerate ...

  • Lucent Technologies AC 60 - page 358

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-70 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 7 ioCar d7Rebo ot-OK 8 ioCar d8Rebo ot-OK 9 ioCar d9Rebo ot-OK 10 ioCard 10Reboot -OK 11 ioCard 11Reboot -OK 12 ioCard 12Reboot -OK 13 ioCard 13Reboot -OK 14 ioCard 14Reboot -OK 15 io ...

  • Lucent Technologies AC 60 - page 359

    255-700-0 25 A-71 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps removeCon figFiles Used t o indicate t he status of a remove configuration files request. V alid range is a number between 1 and 4. See table below for a mapping between numbe rs a ...

  • Lucent Technologies AC 60 - page 360

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-72 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 saveConfigurati on ReasonC ode The result o f a save configuratio n request. V alid range is a numbe r betwee n 1 and 14. See table below for a mapping between numb ers and their enum ...

  • Lucent Technologies AC 60 - page 361

    255-700-0 25 A-73 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps stat RtSt atus Return cod es for Route S erver module sta tic route condititio ns. V alid range is a number between 1 and 18. See table below for a mapping between numbe rs and the ...

  • Lucent Technologies AC 60 - page 362

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-74 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 stratumMode Current st atus of the primary S tratum 3– 4 module. V alid rang e is a number betw een 1 and 4. See t able bel ow for a map ping between numbers an d their enumer ated ...

  • Lucent Technologies AC 60 - page 363

    255-700-0 25 A-75 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps T able A-45. Timing Reason Codes upgradeSw CopyStatus Current status o f the ftp softw are upgrade downloa d. V alid range is a number betw een 1 and 5. See t able below for a mapp ...

  • Lucent Technologies AC 60 - page 364

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-76 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 vbrAtmPvcVccIfA Interfa ce index for side A, the variable bit rate side, of a variable bit rate - to-A TM PVC VC C connection. Number va lue is interpreted a s an interface of the f o ...

  • Lucent Technologies AC 60 - page 365

    255-700-0 25 A-77 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix A SNM P T rap Messag es Definitions o f MIB Objects Used for T raps vbrVbrPvcIfB Interfa ce index f or side B of a varia ble bit r ate-to- variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC , where SS ...

  • Lucent Technologies AC 60 - page 366

    Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-78 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 vpnTrapStatus Return codes for R oute Server module virtual pr ivate network (VPN) level operations. V alid range is a number between 1 and 16. See table below fo r a mapping betwe en ...

  • Lucent Technologies AC 60 - page 367

    255-700-0 25 B-1 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 B Pin Configurations Overv iew of This Appe ndix This appendix describes the pinout configurations for the connectors on t he AC 60 common equipment compo nents. Use the following info rmation to connect correctly configured cables to the AC 60 system. Confi ...

  • Lucent Technologies AC 60 - page 368

    Appendix B Pin Configurations Configura tion for the CPU Connector s B-2 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Configuration for the CPU Co nnectors T wo diff erent interfaces are avai lable fo r dire ct access to the CPU component . Y ou can use the console serial inte rface or the Ethernet interface ...

  • Lucent Technologies AC 60 - page 369

    255-700-0 25 B-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix B Pin Configurations Configurati on for the Stratum 3– 4 Connector Ether net 10Base-T Interf ace The AC 6 0 chassis faceplate also acco mmodates the Ethernet i nterfac e using standard R J-45 pin assig nments. Figure B-2 shows the pin locations fo ...

  • Lucent Technologies AC 60 - page 370

    Appendix B Pin Configurations Configura tion for the Stratum 3 –4 Connector B-4 255-700-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 The composite clock signal is a balanced s ignal, which is transmitte d over a shielded twisted p air cable. The cable shi eld is grounded at the composite clock source. T able B-6 d ...

  • Lucent Technologies AC 60 - page 371

    255-700-0 25 C-1 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 C Configuring In-Band Management Setting Up In-B and Management C onfiguration Three types of in-band manage ment configurations are ava ilable: • Direct connection configura tion —Connects the network manageme nt system (NMS ) machine, usually a SUN wor ...

  • Lucent Technologies AC 60 - page 372

    Appendix C Configuring In-Band Management Using the Direct Con nection Confi guration C-2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Using the Direct Connection Configuration The default gateway t hrough the in-band network can be configur ed on all Access Conce ntrators with the IP addres s of the NMS ma ...

  • Lucent Technologies AC 60 - page 373

    255-700-0 25 C-3 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Dir ect Connecti on Configuration ifconfig fa0 <forecard_Ip_Address> netmas k <Netmask> broadcast <Bcast_address> mtu <Mtu_Size > up wher e, forecard_Ip_Address = the IP address of t ...

  • Lucent Technologies AC 60 - page 374

    Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-4 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 AAL= 5 Check whether the connect ions have been configured by using the command atmarp -a 2 A l l th e re m o t e P S A X s y s t e m s ’ i n - b a n d i n t e r f a c e I ...

  • Lucent Technologies AC 60 - page 375

    255-700-0 25 C-5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Perform t he step s in the fol lowing pr ocedure to con figure th e routed connection. Steps for Setting Connections for a Routed Connection Begi n Configurati on 1 A Route ...

  • Lucent Technologies AC 60 - page 376

    Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-6 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 PSAX s ystem. The inte rmediate router PS AX sy stem has two types of in- band connections: upstream connections to a router PSAX system and downstream connections to e ithe ...

  • Lucent Technologies AC 60 - page 377

    255-700-0 25 C-7 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Setting PVC Connections for Routed Connection Configuration Assume that t he VPI:VCI for the conne ction between node A and B is VPIab: VCIab, et c. Also assume that t he E ...

  • Lucent Technologies AC 60 - page 378

    Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-8 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 Configure the pr imary IP Address for in-band management on the CP U module of main route r PSAX system (No de D) using the console interface: Use [Site Specific Configura ...

  • Lucent Technologies AC 60 - page 379

    255-700-0 25 C-9 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration For setting up an in-band connection from the DS3 card to the CPU module, configure the DS3 card and put it into service. Then, using the console interface [Connection Conf ...

  • Lucent Technologies AC 60 - page 380

    Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-10 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Slot <Slo t> VP I: VPIcfIP Addr ess: 020.001. 001.004 Port1 VC I: VCIcfI P Mask: 255.2 55.255.000 Channel 1 12 Set up in-band managment connections on the CPU module ...

  • Lucent Technologies AC 60 - page 381

    255-700-0 25 C-11 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Perform t he step s in the fol lowing proced ure to confi gure a h ybrid connection. Begi n Steps to Setting Connections for Hybrid Con nection Configura tion 1 In the hyb ...

  • Lucent Technologies AC 60 - page 382

    Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-12 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 4 For all the PSAX systems exce pt the main router PSAX s ystem, the Ethernet interface IP network should be different from the SUN machine’ s Ethernet interface IP netwo ...

  • Lucent Technologies AC 60 - page 383

    255-700-0 25 C-13 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Primar y IP Ma sk: 255.00 0.000.000 2 Configur e the primar y and backu p IP Addr ess for in- band manage ment on the CPU module of the interme diate router PS AX system ( ...

  • Lucent Technologies AC 60 - page 384

    Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-14 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Port1 VCI: VCIa bIP Mask : 255.000.0 00.000 Channel 1 Slot<Slot> VPI: VPIa cIP Add ress: 020 .001.001.003 Port1 VCI: VCIa cIP Mask: 255.000. 000.000 Channel 1 Slot< ...

  • Lucent Technologies AC 60 - page 385

    255-700-0 25 C-15 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Channel 1 8 V erify that a routing table entry from the SUN machine’ s network to network 20.0.0.0 exis ts on the SUN machine using the netstat - nr command: 9 Use ping, ...

  • Lucent Technologies AC 60 - page 386

    Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-16 255-70 0-025 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 ...

  • Lucent Technologies AC 60 - page 387

    255-700-0 25 D-1 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6. 3.0 D A TM T raf fic Descriptors Overv iew of This Appe ndix This appendix d escribes how each traffic desc riptor affects t he A T M cell streams under different traffic conditions. When you create a PVC, you can select one of severa l traffic descrip tors. The ...

  • Lucent Technologies AC 60 - page 388

    Appendix D A TM T ra ff ic Descriptors T raffic Descriptor s Supported D-2 255-700-02 5 Packet Star ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 • One bucket , with no tagging for cells with both CLP bit=0 and CLP bit=1 (1B-N T -0+1) This traffic descriptor uses t he par ameters one bucket, no tagging, cell los s priority (CL P)= ...

  • Lucent Technologies AC 60 - page 389

    255-700-0 25 E-1 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 E Refer ence Information Overv iew of This Appe ndix This appendix co ntains reference tables that are helpful while confi guring your PSAX Access Concentrator system. The followi ng types of information are p rovid ed: • Quality of service (QoS) inf ormati ...

  • Lucent Technologies AC 60 - page 390

    Appendix E Reference Information QoS Information T ables E-2 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 T able E-2 illustra tes the attributes of the classes of service suppor ted by the Access Concentrat or system so ftware . The following two tables il lustrate how A TM classes of service map to intern ...

  • Lucent Technologies AC 60 - page 391

    255-700-0 25 E-3 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information QoS In formation T ables system. The flexibility of t he Access Concentrator systems allow s the user to tailor the system based on the required se rvice applications and the selection of the a ppropriate priority lev els. T a ...

  • Lucent Technologies AC 60 - page 392

    Appendix E Reference Information Complia nce Matrix E-4 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Compliance Matrix The following table contains compliance specifications for the Access Concentr ator syste ms, and the I/O an d server modules as descr ibed in Ta b l e E - 5 . T able E-5. Complia nce Spec ...

  • Lucent Technologies AC 60 - page 393

    255-700-0 25 E-5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information Complia nce Matrix ITU-T G.726 Genera l Aspects of Digital T ransmiss ion Systems T e rminal Equ ipments: 40, 32, 24, 16 Kbit/s Adaptive Differentia l Pulse Code Modulati on (ADPCM ) V oice comp ression (16, 24, 32, 40 Kbps) a ...

  • Lucent Technologies AC 60 - page 394

    Appendix E Reference Information Complia nce Matrix E-6 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 ITU-T I.12 1 Inte grated Services Digital Network (ISDN) General Structure and Service Capa bili- ties: Broa dband Aspects of ISDN ITU-T I.15 0 B-IS DN A TM Functional characteris tics ITU-T I .233 Fram e M ...

  • Lucent Technologies AC 60 - page 395

    255-700-0 25 E-7 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information Complia nce Matrix ITU-T I .610 B-ISDN op eration and mainte nance pr inci- ples and functions OAM F4/F5 process ing (remote def ect indicat ion [RDI] and alarm indic ation sig- nal [AIS]) ITU-T Q .922 Ann ex A Digital Subscri ...

  • Lucent Technologies AC 60 - page 396

    Appendix E Reference Information Complia nce Matrix E-8 255-700-02 5 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 af-phy- 0086.000 Inverse M ultiplexing over ATM (IMA) Up t o 3 groups, wi th up to six circuits per group af-pnni- 0026.000 Interim I nter-Switch Signaling Protocol (IISP) af-pnni- 0055.000 Private N etwork ...

  • Lucent Technologies AC 60 - page 397

    255-700-0 25 E-9 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information Module Alarm Status T able Module Alarm Status T able The Alarm Status field on the Equipment Configuration window displays the current status of all Pa cketStar I/O, s erver , and common equipment module in your PSAX Acce ss ...

  • Lucent Technologies AC 60 - page 398

    Appendix E Reference Information Connect ion T ype by Interface T ype T able E-10 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Connection T ype by In terface T ype T able 3 LineFailed All The line has failed. 4 CardRemoved All A module has been configured and th en remo ved. 5 Reference Clock- Failed Stratu ...

  • Lucent Technologies AC 60 - page 399

    255-700-0 25 E-11 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information Connec tion T ype by Interface T ype T able AT M - t o - AT M virtual p ath connection (VPC) PVC connection X X X X Bridg e-to-A TM VCC PVC con- nection X X X X X Bridg e-to- bridg e PVC connection X Circuit emula- tion-t o A ...

  • Lucent Technologies AC 60 - page 400

    Appendix E Reference Information Interface T ype by Mod ule T able E-12 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 Interface T ype by Modu le T able T able E-8 sho ws the available interfac e types for eac h Packe tStar ™ I/O module in the Access Concentrator system. This table does not include other Pa ...

  • Lucent Technologies AC 60 - page 401

    255-700-0 25 E-13 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 Appendix E Reference Information Interface T ype by Mo dule T able module, the DSP2A/B /C V oice Serv er modules, the Route Serv er module, and the T ones and Announcements Server module. T able E-8. Interface T ypes by I/O Module T ypes A TM IISP (Network/U ...

  • Lucent Technologies AC 60 - page 402

    Appendix E Reference Information Interface T ype by Mod ule T able E-14 255-700-025 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Rele ase 6.3.0 ...

  • Lucent Technologies AC 60 - page 403

    255-700-0 25 F-1 Packe tStar ™ Access Concentrator 60 User Guide , Issue 1 Release 6.3.0 F Eur opean Community Declarations of Conformity Overv iew of This Appe ndix This appendix contains t he European Community (EC ) Declarations of Conformity for Electromagnetic Compatibility Directives, as applicable to the Packe tStar ™ Access Co ncentrato ...

  • Lucent Technologies AC 60 - page 404

    ...

  • Lucent Technologies AC 60 - page 405

    EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divi sion 8301 Profes sional Plac e Landover , Maryland 207 85 USA declar e, und er our sole res ponsibility , that the produc t: Lucent T echnologies AC60 A TM Access Conc entrator , consis ting of t he following mo del numbers: 50S02, 50S48, 20A10, 20A11, 20A12, 20A13, 20N07 ...

  • Lucent Technologies AC 60 - page 406

    ...

  • Lucent Technologies AC 60 - page 407

    EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divi sion 8301 Profes sional Plac e Landover , Maryland 207 85 USA declar e, und er our sole res ponsibility , that the produc t: Lucent T echnologies AC60 A TM Access Conc entrator , consis ting of t he following mo del numbers: 50S02, 50S48, 20A10, 20A11, 20A12, 20A13, 20N07 ...

  • Lucent Technologies AC 60 - page 408

    ...

  • Lucent Technologies AC 60 - page 409

    ...

  • Lucent Technologies AC 60 - page 410

    Copyrig ht © 2000 Lucen t T echnologi es All rights reserved. Printed in the USA. Part No.: 60M0A6301 A1 Printed on paper with 100% total recycled content. Please recycl e. ...

Manufacturer Lucent Technologies Category PacketStar Access Concentrato

Documents that we receive from a manufacturer of a Lucent Technologies AC 60 can be divided into several groups. They are, among others:
- Lucent Technologies technical drawings
- AC 60 manuals
- Lucent Technologies product data sheets
- information booklets
- or energy labels Lucent Technologies AC 60
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lucent Technologies AC 60.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lucent Technologies AC 60, service manual, brief instructions and user manuals Lucent Technologies AC 60. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lucent Technologies AC 60.

A complete manual for the device Lucent Technologies AC 60, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lucent Technologies AC 60 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lucent Technologies AC 60.

A complete Lucent Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lucent Technologies AC 60 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lucent Technologies AC 60, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lucent Technologies AC 60, that we can find in the current document
3. Tips how to use the basic functions of the device Lucent Technologies AC 60 - which should help us in our first steps of using Lucent Technologies AC 60
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lucent Technologies AC 60
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lucent Technologies AC 60 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lucent Technologies AC 60?

Use the form below

If you did not solve your problem by using a manual Lucent Technologies AC 60, ask a question using the form below. If a user had a similar problem with Lucent Technologies AC 60 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)