Manual Snapper ESV25650B

16 pages 0.6 mb
Download

Go to site of 16

Summary
  • Snapper ESV25650B - page 1

    Safety Instructions & Operator’s Manual for EUROPEAN PUSH YARD VACUUM SERIES 0 Model Mfg. No. ESV25650B 7085913 Before operating your new machine, read this manual caref ully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all pow er equipment can be dangerous if used improperly. Also ...

  • Snapper ESV25650B - page 2

    IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions ...

  • Snapper ESV25650B - page 3

    IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside w here there is an open flame, spark or pilot light such as on a w ...

  • Snapper ESV25650B - page 4

    4 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-3 TABLE OF CO NTENTS ..................................................................................................... 4 SETUP INST RUCTIONS ............................................................................... ...

  • Snapper ESV25650B - page 5

    5 SETUP INSTRUCTIONS The majority of the assembly has been co mpleted at the factory. After removing the machine from the shipping container you will be required to unfold the handles, attach the debris bag, and insert the accessory plug into the vacuum nozzle. Initial adjustments and operational tests were performed prior to shipping the machine. ...

  • Snapper ESV25650B - page 6

    6 Section 1 – FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operator’s of the Yard Vacuum. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY ...

  • Snapper ESV25650B - page 7

    7 Section 1 – FAMILIARIZATION 1.3 SAFETY AND INSTRUCTION LABELS The safety and instruction labels included with your Yard Vacuum are very important. Read, understand and follow all instructions and warnings. Keep these labels clean and legible at all times. Replace any labels that are lost or can no longer be read. WARNING – HEARING, EYE AND BR ...

  • Snapper ESV25650B - page 8

    8 Section 2 – OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Read, understand and follow instructions and warnings in this manual and on the machine, engine and attachments before operating. Know the controls and the proper use of the machine before starting. Make the following checks and perform the service required before each start-up. 2.1.1. ...

  • Snapper ESV25650B - page 9

    9 Section 2 – OPERATING INSTRUCTIONS WARNING Entire debris bag and bag adapter must be properly installed before starting engine. The debris bag and bag adapter are subject to deterioration during normal use. Inspect frequently and replace if signs of deterioration are observed. 2.2 STARTING, STOPPING & OPERATION 2.2.1. STARTING ENGINE Before ...

  • Snapper ESV25650B - page 10

    10 Section 3 – MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs w ith the engine running. STOP engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine. 3.1 INTRODUCTION To retain the quality ...

  • Snapper ESV25650B - page 11

    11 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine. 4.1 ENGINE ADJUSTMENTS & ...

  • Snapper ESV25650B - page 12

    12 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not 1. F ue l ta nk e mp ty . 1. Fill fuel tank with fresh fuel to proper level. Start Using 2. Engine needs choking or priming. 2. Move control to “CHOKE”, press primer. Recoil Starter 3. Spark plug wire disconnected. 3. Pl ace spark plug wire onto spark plug. 4. Fuel valv ...

  • Snapper ESV25650B - page 13

    13 MAINTENANCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEA SON Engine Check Oil Level Page 8 X Engine Initial Oil Change Page 10 X Engine Periodic Oil Change Page 10 X* Air Pre-Cleaner Service Sponge Pre- Cleaner Element Engine Manual X** Air Cleaner Replace Element Engine Manual X* ...

  • Snapper ESV25650B - page 14

    14 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _ ...

  • Snapper ESV25650B - page 15

    15 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _ ...

  • Snapper ESV25650B - page 16

    16 Safety Instructions & Operator’s Manual for EUROPEAN PUSH YARD VACUUM SERIES 0 IMPORTANT These products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety w arnings. Read, Understand, and Fol ...

Manufacturer Snapper Category Yard Vacuum

Documents that we receive from a manufacturer of a Snapper ESV25650B can be divided into several groups. They are, among others:
- Snapper technical drawings
- ESV25650B manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper ESV25650B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper ESV25650B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper ESV25650B, service manual, brief instructions and user manuals Snapper ESV25650B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper ESV25650B.

A complete manual for the device Snapper ESV25650B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper ESV25650B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper ESV25650B.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper ESV25650B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper ESV25650B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper ESV25650B, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper ESV25650B - which should help us in our first steps of using Snapper ESV25650B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper ESV25650B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper ESV25650B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper ESV25650B?

Use the form below

If you did not solve your problem by using a manual Snapper ESV25650B, ask a question using the form below. If a user had a similar problem with Snapper ESV25650B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)