English dropdown-ico

Manual Fujitsu M8000

100 pages 4.78 mb
Download

Go to site of 100

Summary
  • Fujitsu M8000 - page 1

    Site Planning Guide SPARC Enterprise M8000 / M9000 Servers Englis h ...

  • Fujitsu M8000 - page 2

    ...

  • Fujitsu M8000 - page 3

    SP ARC ® Enter pr ise M8000/M9000 Ser v ers Site Planning Guide Order No . U41685-J-Z816-2-76 Pa r t No. 819-7885-11 September 2007, Revision A ...

  • Fujitsu M8000 - page 4

    Please Recycle Copyright 2007 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japan. All rights reserved. Sun Microsystems, Inc. pr ovided technical input and review on portions of this material. Sun Microsystems, Inc. and Fujitsu Limited each own or contr ol intellectual property rights r elating to p ...

  • Fujitsu M8000 - page 5

    Copyright 2007 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japon. T ous droits réservés. Entrée et revue tecnical fournies par Sun Micr osystems, Incl sur des parties de ce matériel. Sun Microsystems, Inc. et Fujitsu Limited détiennent et contrôlent toutes deux des dr oits de propriété inte ...

  • Fujitsu M8000 - page 6

    ...

  • Fujitsu M8000 - page 7

    v Contents Preface xiii 1. Physical and Network Specif ications 1–1 1.1 Before Setting Up the System 1–1 1.2 Physical Specifications 1–4 1.2.1 System Components 1–4 1.2.1.1 Names and Corresponding Capacities and Functions 1–4 1.2.1.2 External Dimensions and W eights 1–5 1.2.1.3 System Appearance 1–6 1.2.2 System Installation (Space) 1 ...

  • Fujitsu M8000 - page 8

    vi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.5.1 Setup and Network Connections 1–33 1.2.5.2 Platform and Domain Setup Information 1–34 1.2.5.3 Selecting a System Control Network Conf iguration 1– 34 1.2.5.4 Interface Cable Connections 1–38 2. Environmental and Electrical Specif ications 2–1 2.1 Enviro ...

  • Fujitsu M8000 - page 9

    Contents vii Abbreviations Abbreviations–1 Index Index–1 ...

  • Fujitsu M8000 - page 10

    viii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ...

  • Fujitsu M8000 - page 11

    ix Figur es FIGURE 1-1 SPARC Enterprise M8000 Server 1–6 FIGURE 1-2 SPARC Enterprise M8000 Server + Power Cabinet 1–7 FIGURE 1-3 SPARC Enterprise M9000 Server (Base Cabinet) 1–8 FIGURE 1-4 SPARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) 1–9 FIGURE 1-5 SPARC Enterprise M9000 Server (Base Cabinet + Power Cabinet) 1–10 FIGUR ...

  • Fujitsu M8000 - page 12

    x SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-18 SPARC Enterprise M8000 Server + Power Cabinet Bottom View 1–23 FIGURE 1-19 SPARC Enterprise M9000 Server (Base Cabinet) Bottom View 1–24 FIGURE 1-20 SPARC Enterprise M9000 Server (Base Cabinet) + Power Cabinet Bottom View 1–25 FIGURE 1-21 SPARC Enterpris ...

  • Fujitsu M8000 - page 13

    xi T ables T ABLE 1-1 Checklist 1–1 T ABLE 1-2 Names and Quantities 1–4 T ABLE 1-3 Installation Specifications (External Dimensions and Weights) 1–5 T ABLE 1-4 Space Required for Transport 1–30 T ABLE 2-1 Specifications (Ambient Environmental Requirements) 2–2 T ABLE 2-2 Recommended Temperature and Humidity Values for Computer Rooms 2–3 ...

  • Fujitsu M8000 - page 14

    xii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ...

  • Fujitsu M8000 - page 15

    xiii Pr eface The SP ARC ® Enterprise M8000/M9000 server installation planning manual provides the physical system specifications for this type of server , gives an overview of the network specifications, and explains other items that need to be consider ed beforehand when planning system installation. (These topics include system environment r eq ...

  • Fujitsu M8000 - page 16

    xiv SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ■ Chapter 2 Environmental and Electrical Specifications This chapter describes the system environment r equirements that must be met for safe system migration, as well as the power supply requir ements, for SP ARC Enterprise M8000/M9000 servers. ■ Abbreviations Prov ...

  • Fujitsu M8000 - page 17

    Preface xv Note – “x” in the order number is the version number of the manual. 1. Manuals on the W eb The latest versions of all the SP ARC Enterprise Series manuals are available at the following website: http://manuals.fujitsu-siemens.com/ 2. Pr ovided in system Man page of the XSCF Note – The man page can be refer enced on the XSCF shell ...

  • Fujitsu M8000 - page 18

    xvi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 T ext Conventions This manual uses the following fonts and symbols to express specif ic types of information. Fonts/symbols Meaning Example AaBbCc123 What you type, when contrasted with on-screen computer output. This font repr esents the example of command input in the ...

  • Fujitsu M8000 - page 19

    Preface xvii Pr ompt Notations The following prompt notations ar e used in this manual. Syntax of the Command Line Interface (CLI) The command syntax is as follows: ■ A variable that requir es input of a value must be enclosed in <>. ■ An optional element must be enclosed in [ ]. ■ A group of options for an optional keywor d must be enc ...

  • Fujitsu M8000 - page 20

    xviii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Envir onment Requirements for Using This Pr oduct This product is a computer that is intended to be used in a computer r oom. ...

  • Fujitsu M8000 - page 21

    Preface xix Conventions for Alert Messages This manual uses the following conventions to show alert messages, which are intended to prevent injury to the user or bystanders as well as pr operty damage, and important messages that are useful to the user . W ARNING: This indicates a hazardous situation that could r esult in death or serious personal ...

  • Fujitsu M8000 - page 22

    xx SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Notes on Safety Important Alert Messages This manual provides the following important alert signals: Caution – The W ARNING signal indicates a dangerous situation could result in death or serious injury if the user does not perform the procedur e correctly . T ask Warn ...

  • Fujitsu M8000 - page 23

    Preface xxi Caution – The CAUTION signal indicates a hazardous situation could r esult in minor or moderate personal injury if the user does not perform the procedur e correctly . This signal also indicates that damage to the product or other pr operty may occur if the user does not perform the procedur e correctly . T ask Warning Normal operatio ...

  • Fujitsu M8000 - page 24

    xxii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Normal operation Data destruction Confirm the items listed below befor e turning off the power . Otherwise, data may be destroyed. • All applications have completed processing. • No user is using the equipment. • When the main unit power is turned off, the Power ...

  • Fujitsu M8000 - page 25

    Preface xxiii Alert Labels The labels shown below are af fixed on this pr oduct. These labels provide information for users of the product: Caution – Do not peel off the labels. ■ SP ARC Enterprise M8000 Server SP ARC Enter pr ise M8000 Ser ver (F ront View) ...

  • Fujitsu M8000 - page 26

    xxiv SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ■ SP ARC Enterprise M9000 Server SP ARC Enter pr ise M9000 Ser ver (F ront View) ...

  • Fujitsu M8000 - page 27

    Preface xxv SP ARC Enter pr ise M9000 Ser ver (Rear Vie w) ...

  • Fujitsu M8000 - page 28

    xxvi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 SP ARC Enter pr ise M9000 Ser ver with Expansion Cabinet (Rear Vie w) ...

  • Fujitsu M8000 - page 29

    Preface xxvii Pr oduct Handling Maintenance Caution – Certain tasks in this manual should only be performed by a certified service engineer . User must not perform these tasks. Incorrect operation of these tasks may cause electric shock, injury , or fire. ■ Installation and reinstallation of all components, and initial settings ■ Removal of f ...

  • Fujitsu M8000 - page 30

    xxviii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Emission of Laser Beam (Invisible) Caution – The main unit and high-speed optical interconnect cabinet contain modules that generate invisible laser radiation. Laser beams are generated while the equipment is operating, even if an optical cable is disconnected or a ...

  • Fujitsu M8000 - page 31

    Preface xxix Reader's Comment Form ...

  • Fujitsu M8000 - page 32

    xxx SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FOLD AND T APE FOLD AND T APE BUSINESS REPLY MAIL FIRST -CLASS MAIL PERMIT NO 741 SUNNYV ALE CA NO POST AGE NECESSAR Y IF MAILED IN THE UNITED ST ATES POST AGE WILL BE P AID BY ADDRESSEE FUJITSU COMPUTER SYST EMS AT T E N T I O N ENGINEERING OPS M/S 249 1250 EAST ARQUES ...

  • Fujitsu M8000 - page 33

    1-1 CHAPTER 1 Physical and Network Specif ications This chapter describes what the reader is expected to know , including physical and network connection specifications for the SP ARC ® Enterprise M8000/M9000 Servers, before planning server installation. This chapter contains the following sections: ■ Section 1.1, “Before Setting Up the System ...

  • Fujitsu M8000 - page 34

    1-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Physical specifications Has the server installation location been decided? ❏ Does the installation floor layout satisfy the ventilation and maintenance access requir ements? See Section 1.2.2, “System Installation (Space)” on page 1- 12 ❏ Does the device layout ...

  • Fujitsu M8000 - page 35

    Chapter 1 Physical and Netw ork Specifications 1-3 Facility power Do you know the requir ed operating voltages and electrical current levels of the device and peripherals? See Section 2.2, “Electrical Specifications” on page 2-4 ❏ Are enough power outlets pr ovided for the server cabinet, monitors, and peripherals? ❏ Are the cir cuit breake ...

  • Fujitsu M8000 - page 36

    1-4 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2 Physical Specif ications This section outlines the SP ARC Enterprise M8000/M9000 Server components and lists their physical specifications. 1.2.1 System Components 1.2.1.1 Names and Corresponding Capacities and Functions T ABLE 1-2 lists the names and the capacities ...

  • Fujitsu M8000 - page 37

    Chapter 1 Physical and Netw ork Specifications 1-5 1.2.1.2 External Dimensions and W eights T ABLE 1-3 lists the external dimensions and weights of the SP ARC Enterprise M8000/M9000 server cabinet. T ABLE 1-3 Installation Specifications (External Dimensions and W eights) Name External dimensions [mm (inch)] Weight [kg] Width Depth Height SP ARC Ent ...

  • Fujitsu M8000 - page 38

    1-6 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.1.3 System Appearance FIGURE 1- 1 to FIGURE 1-6 show the appearance of the server components and the associated servers in their maximum configuration. SP ARC Enterprise M8000 Server Appearance FIGURE 1-1 SP ARC Enterprise M8000 Server F ront Rear ...

  • Fujitsu M8000 - page 39

    Chapter 1 Physical and Netw ork Specifications 1-7 FIGURE 1-2 SP ARC Enterprise M8000 Server + Power Cabinet F ront Rear ...

  • Fujitsu M8000 - page 40

    1-8 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 SP ARC Enterprise M9000 Server Appearance FIGURE 1-3 SP ARC Enterprise M9000 Server (Base Cabinet) F ront Rear ...

  • Fujitsu M8000 - page 41

    Chapter 1 Physical and Netw ork Specifications 1-9 FIGURE 1-4 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) F ront Rear ...

  • Fujitsu M8000 - page 42

    1-10 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-5 SP ARC Enterprise M9000 Server (Base Cabinet + Power Cabinet) F ront Rear ...

  • Fujitsu M8000 - page 43

    Chapter 1 Physical and Netw ork Specifications 1-11 FIGURE 1-6 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet + Power Cabinet) F ront Rear ...

  • Fujitsu M8000 - page 44

    1-12 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.2 System Installation (Space) 1.2.2.1 Size and Space Specifications Before starting to assemble a SP ARC Enterprise M8000/M9000 Servers installation, secure a service ar ea (maintenance area) that is lar ge enough for each device (cabinet) plus requir ed service ac ...

  • Fujitsu M8000 - page 45

    Chapter 1 Physical and Netw ork Specifications 1-13 FIGURE 1-8 SP ARC Enterprise M8000 Server + Power Cabinet Installation Area Note – Before mounting units in an SP ARC Enterprise M8000 Server equipment rack, secure the service ar eas shown. Service area Unit: mm (inch) 1054 (41.5) M8000 Power Cabinet 1260 (49.6) 800 (31.5) 800 (31.5) 2860 (1 12 ...

  • Fujitsu M8000 - page 46

    1-14 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-9 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) Installation Area 2860 (1 12.6) 1260 (49.6) 800 (31.5) 800 (31.5) Service area Service area 1550 (61.0) 750 (29.5) M8000 Unit: mm (inch) F ront ...

  • Fujitsu M8000 - page 47

    Chapter 1 Physical and Netw ork Specifications 1-15 FIGURE 1-10 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) + Power Cabinet Installation Area Note – Before mounting units in an SP ARC Enterprise M8000 Server equipment rack at a location where no space can be secur ed on the right side of the server equipment, secure the service ar ea ...

  • Fujitsu M8000 - page 48

    1-16 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-11 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) Installation Area M8000 Service area Service area 750 (29.5) 800 (31.5) 1260 (49.6) 3260 (128.3) 1200 (47.2) Unit: mm (inch) F ront ...

  • Fujitsu M8000 - page 49

    Chapter 1 Physical and Netw ork Specifications 1-17 FIGURE 1-12 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) + Power Cabinet Installation Area Power Cabinet M8000 Service area Service area Unit: mm (inch) 1054 (41.5) 1200 (47.2) 800 (31.5) 3260 (128.3) 1260 (49.6) 737 (29.0) 317 (12.5) 800 (31.5) F ront ...

  • Fujitsu M8000 - page 50

    1-18 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 SP ARC Enterprise M9000 Server Installation Area FIGURE 1-13 SP ARC Enterprise M9000 Server (Base Cabinet) Installation Area M9000 (Base Cabinet) Service area Service area Unit: mm (inch) 900 (35.4) 900 (35.4) 1260 (49.6) 3060 (128.3) 850 (33.4) F ront ...

  • Fujitsu M8000 - page 51

    Chapter 1 Physical and Netw ork Specifications 1-19 FIGURE 1-14 SP ARC Enterprise M9000 Server (Base Cabinet) + Power Cabinet Installation Area Service area Service area M9000 (Base Cabinet) Power Cabinet 1 154 (45.3) 837 (33.0) 317 (12.5) 900 (35.4) 1260 (49.6) 3060 (128.3) 900 (35.4) Unit: mm (inch) F ront ...

  • Fujitsu M8000 - page 52

    1-20 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-15 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) Installation Area Service area Service area Unit: mm (inch) M9000 (Ex. Cabinet) M9000 (Base Cabinet) 837 (33.0) 1674 (65.9) 900 (35.4) 900 (35.4) 1260 (49.6) 3060 (128.3) F ront ...

  • Fujitsu M8000 - page 53

    Chapter 1 Physical and Netw ork Specifications 1-21 FIGURE 1-16 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) + Power Cabinet Installation Area Service area Service area Unit: mm (inch) 317 (12.5) 824 (32.4) 2282 (89.8) Power Cabinet Power Cabinet M9000 (Ex. Cabinet) M9000 (Base Cabinet) 900 (35.4) 900 (35.4) 1260 (49.6) 3060 (1 ...

  • Fujitsu M8000 - page 54

    1-22 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.2.2 Bottom V iews of the Components FIGURE 1- 17 to FIGURE 1-22 show the bottom of the SP ARC Enterprise M8000/M9000 Servers components, such as the openings for laying cables, air inlet ports used for cooling, legs, and casters. The values indicated are layout val ...

  • Fujitsu M8000 - page 55

    Chapter 1 Physical and Netw ork Specifications 1-23 FIGURE 1-18 SP ARC Enterprise M8000 Server + Power Cabinet Bottom V iew Unit: mm (inch) Caster F eet Opening f or air inlet Opening f or cables inlet and outlet F ront ...

  • Fujitsu M8000 - page 56

    1-24 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 SP ARC Enterprise M9000 Server Bottom V iew FIGURE 1-19 SP ARC Enterprise M9000 Server (Base Cabinet) Bottom V iew Unit: mm (inch) F ront Caster F eet Opening f or air inlet Opening f or cables inlet and outlet ...

  • Fujitsu M8000 - page 57

    Chapter 1 Physical and Netw ork Specifications 1-25 FIGURE 1-20 SP ARC Enterprise M9000 Server (Base Cabinet) + Power Cabinet Bottom V iew Unit: mm (inch) F ront Caster F eet Opening f or air inlet Opening f or cables inlet and outlet ...

  • Fujitsu M8000 - page 58

    1-26 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 1-21 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) Bottom V iew Unit: mm (inch) F ront Caster F eet Opening f or air inlet Opening f or cables inlet and outlet ...

  • Fujitsu M8000 - page 59

    Chapter 1 Physical and Netw ork Specifications 1-27 FIGURE 1-22 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) + Power Cabinet Bottom V iew Unit: mm (inch) F ront Caster F eet Opening f or air inlet Opening f or cables inlet and outlet ...

  • Fujitsu M8000 - page 60

    1-28 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.2.3 Free-Access Floor Openings for Underf loor Air-Conditioning Use underfloor air conditioning to cool the SP ARC Enterprise M9000 Server (with an extended cabinet). T o use underfloor air conditioning, air-conditioning openings must be provided on the free-access ...

  • Fujitsu M8000 - page 61

    Chapter 1 Physical and Netw ork Specifications 1-29 FIGURE 1-24 SP ARC Enterprise M9000 Server (Base Cabinet + Expansion Cabinet) + Power Cabinet Bottom V iew 1.2.2.4 Ceiling Height The minimum ceiling height for the SP ARC Enterprise M8000/M9000 Server is 2.3m (7.5 feet), measured fr om the true floor or a raised f loor , whichever is higher . The ...

  • Fujitsu M8000 - page 62

    1-30 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.3 Planning Y our Access Route This section describes necessary considerations before you move the server to its installation destination. 1.2.3.1 Space Required for System T ransport The access route must satisfy the r equirements listed in T ABLE 1-4 . Each cabine ...

  • Fujitsu M8000 - page 63

    Chapter 1 Physical and Netw ork Specifications 1-31 1.2.3.2 Other Considerations Confirm that the access r oute is free of any steps and other obstacles that would expose the device to shock. 1.2.4 Cabinet Stabilization Measur es This section shows useful methods of securing a SP ARC Enterprise M8000/M9000 server to prevent it fr om shifting due to ...

  • Fujitsu M8000 - page 64

    1-32 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Method of Securing the Device T o the Floor Surface (Example of securing the SP ARC Enterprise M9000 Server in place) FIGURE 1-25 Cabinet Stabilization Measure: Securing the Device to the Floor Surface 850 (33.5) 66 (2.6) 66 (2.6) 99 (3.9) 99 (3.9) 1260 (49.6) 171 (6.7 ...

  • Fujitsu M8000 - page 65

    Chapter 1 Physical and Netw ork Specifications 1-33 Method of Securing the Device Through a Hole in the Floor FIGURE 1-26 Cabinet Stabilization Measure: Securing the Device thr ough a Hole in the Floor 1.2.5 Planning Y our Network Connection This section provides an overview for starting the SP ARC Enterprise M8000/M9000 server network requir ed fo ...

  • Fujitsu M8000 - page 66

    1-34 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.5.2 Platform and Domain Setup Information The following information is requir ed for installation of the SP ARC Enterprise M8000/M9000 servers: ■ Host name ■ IP address ■ Domain ■ Netmask ■ IP address of the network gateway ■ IP address of the network n ...

  • Fujitsu M8000 - page 67

    Chapter 1 Physical and Netw ork Specifications 1-35 XSCF Conf iguration A (Basic Conf iguration) Only one of the two LAN ports is used. The serial port and the other LAN port are reserved so that they can be used as maintenance ports. The same switch is used for system administration and the remote service. Consequently , any failure of the switch ...

  • Fujitsu M8000 - page 68

    1-36 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 XSCF Conf iguration B (Restricted Conf iguration) (Restricted redundancy) - Both LAN ports ar e used. One port is used for system administration, and the other is used for the remote message function. If one switch fails, errors can be r eported. The serial port and po ...

  • Fujitsu M8000 - page 69

    Chapter 1 Physical and Netw ork Specifications 1-37 XSCF Conf iguration C (Maximum Conf iguration) (Maximum redundancy) - Both LAN ports ar e used. Each switch has maintenance ports, which are used for the r emote service or system administration. The switches are connected for failur e management and system administration. If a switch fails, no in ...

  • Fujitsu M8000 - page 70

    1-38 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 1.2.5.4 Interface Cable Connections SP ARC Enterprise Server Connection Schematic Diagram FIGURE 1-30 SP ARC Enterprise M8000/M9000 Server Connection Schematic Diagram M8000/M9000 Basic equipment XSCFU (x2) LAN por t (x2) Serial por t USB RCI-IF IOU (M8000: Max4) (M900 ...

  • Fujitsu M8000 - page 71

    2-1 CHAPTER 2 Envir onmental and Electrical Specif ications This chapter explains environmental and electrical power supply specif ications and conditions necessary for stable system operation: ■ Environmental Requir ements ■ Electrical Specifications ■ Cooling Specifications ■ Facility Power Requirements 2.1 Envir onmental Requirements 2.1 ...

  • Fujitsu M8000 - page 72

    2-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 2.1.2 Recommended Ambient T emperature and Humidity Keep the temperature in the computer r oom at a comfortable temperature for people or slightly lower . At this temperature level, inadequate cooling of parts of the computer room due to the heat generated by a device o ...

  • Fujitsu M8000 - page 73

    Chapter 2 Environmental and Electrical Specifications 2-3 Air conditioning facilities usually do not provide functions to pr ecisely monitor and control the temperatur e and humidity throughout an entir e computer room. Generally , computer room air conditioning controls the temperature and humidity according to the monitoring data at individual po ...

  • Fujitsu M8000 - page 74

    2-4 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 2.1.3 V ibration Requirements The allowable vibration in the SP ARC Enterprise M8000/M9000 servers are listed in T ABLE 2-2 . 2.2 Electrical Specif ications SP ARC Enterprise M8000/M9000 Servers can use two types of power supply: single- phase power and three-phase powe ...

  • Fujitsu M8000 - page 75

    Chapter 2 Environmental and Electrical Specifications 2-5 2.2.1 Single-Phase Power Supplies T ABLE 2-4 Specifications (Single-Phase Power Requir ements) (1 of 2) Name P ower supply P ower consumption [kW] Apparent power [kV A] P ower factor Rush current [A 0 -p] Leak current [mA] Circuit breaker capacity [A] V oltage [V] Phase Frequency [Hz] SP ARC ...

  • Fujitsu M8000 - page 76

    2-6 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Power Cabinet SP ARC Enterprise M9000 Server (base cabinet + expansion cabinet) 1 200 to 240 VA C ± 10% Single 50/60 +2%, -4% 42.6 5 44.8 5 0.9 or higher 100 or less 6 4.1 or less 6 30 7 Rack- mountable Dual Power Feed (for SP ARC Enterprise M8000 Server) 200 to 240 VA ...

  • Fujitsu M8000 - page 77

    Chapter 2 Environmental and Electrical Specifications 2-7 2.2.2 Thr ee-Phase Delta Power Supplies T ABLE 2-5 Specifications (Thr ee-Phase Delta Power Requirements) Name P ower supply P ower consumption [kW] Apparen t power [kV A] P ower factor Rush current [A0-p] Leakage current [mA] Circuit breaker capacity [A] V oltage [V] Phase Frequency [Hz] SP ...

  • Fujitsu M8000 - page 78

    2-8 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 2.2.3 Thr ee-Phase Star Power Supplies 2.3 Cooling Specif ications 2.3.1 Cooling (Air -Conditioning) Requir ements T ABLE 2-7 lists the cooling and air-conditioning r equirements for each system component. T ABLE 2-6 Specifications (Thr ee-Phase Star Power Requirements) ...

  • Fujitsu M8000 - page 79

    Chapter 2 Environmental and Electrical Specifications 2-9 2.3.2 Airf low and Heat Dissipation Since the SP ARC Enterprise M8000/M9000 Server is designed to be cooled by forced air convection, suff icient airflow thr oughout the entire system must be generated. T o satisfy the requir ements listed below , the installation space requirements listed i ...

  • Fujitsu M8000 - page 80

    2-10 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ■ The SP ARC Enterprise M9000 Server uses internal fans in the base cabinet and expansion cabinet, and it generates a total airflow of 102 cubic meters per minute (3600 cubic feet per minute [cfm]) under normal operating conditions. ■ The Power Cabinet and Rack-mou ...

  • Fujitsu M8000 - page 81

    Chapter 2 Environmental and Electrical Specifications 2-11 ■ The SP ARC Enterprise M9000 Server draws air from the bottom of the cabinet and exhausts it at the top. FIGURE 2-2 Cooling air and exhaust flows of SP ARC Enterprise M9000 Server ■ The Power Cabinet draws air from the fr ont of the cabinet and exhausts it at the rear . FIGURE 2-3 Cool ...

  • Fujitsu M8000 - page 82

    2-12 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 2.4 Facility Power Requir ements This section describes the power supply requir ements for system operation. Obtain the appropriate power supply after conf irming the power requir ements for the system to be installed. 2.4.1 Power Supply to Devices 2.4.1.1 Single-Phase ...

  • Fujitsu M8000 - page 83

    Chapter 2 Environmental and Electrical Specifications 2-13 Note – T o connect power cables for this system directly to your power distribution board, the power cables must be connected on a one-to-one basis as shown in the above figur e. FIGURE 2-5 Single-Phase Power Supply Connections (SP ARC Enterprise M9000 Server) Note – The base and dual p ...

  • Fujitsu M8000 - page 84

    2-14 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 2.4.1.2 Power Cable Connection Specifications T ABLE 2-8 lists specifications for single-phase power supply connections. The SP ARC Enterprise M8000/M9000 Server is equipped with the required number of single-phase power cables. T ABLE 2-8 Specifications (Single-Phase ...

  • Fujitsu M8000 - page 85

    Chapter 2 Environmental and Electrical Specifications 2-15 SP ARC Enterprise M9000 Server Japan 3.0m (9.8 feet) 30A-250V 3P , locking type (NEMA L6-30R) (Base cabinet) 5 (single power feed) 10 (dual power feed) (Base cabinet + expansion cabinet) 10 (single power feed) 20 (dual power feed) 30A-250V 3P , hook type, locking (NEMA L6-30R) Embedded type ...

  • Fujitsu M8000 - page 86

    2-16 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 SP ARC Enterprise M9000 Server Europe 3.0m (9.8 feet) EN60309 (32A) (Base cabinet) 5 (single power feed) 10 (dual power feed) (Base cabinet + expansion cabinet) 10 (single power feed) 20 (dual power feed EN60309 (32A) 1 The power cable length is the length from the cab ...

  • Fujitsu M8000 - page 87

    Chapter 2 Environmental and Electrical Specifications 2-17 2.4.1.3 Three-Phase Power Supply FIGURE 2-6 Three-Phase Delta Power Supply Connections Note – The basic power bus and dual system power bus must be connected to differ ent AC power supplies. AC200-240V AC200-240V Input #1 Input #0 Power Cabinet M8000/M9000 Base power f eed distribution bo ...

  • Fujitsu M8000 - page 88

    2-18 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Power Cable Connection Specif ications Part of the local electrical work for three-phase power feed is connecting the power cable from the power distribution boar d directly to the Power Cabinet terminal board. Make sure that the facility administrator or a qualif ied ...

  • Fujitsu M8000 - page 89

    Chapter 2 Environmental and Electrical Specifications 2-19 2.4.1.4 Three-Phase Star Power Supply FIGURE 2-8 Three-Phase Star Power Supply Connections Note – The basic power bus and dual system power bus must be connected to differ ent AC power supplies. M8000/M9000 Power Cabinet Dual power f eed distribution board A C380-415V Base power f eed dis ...

  • Fujitsu M8000 - page 90

    2-20 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 Power Cable Connection Specif ications Part of the local electrical work for three-phase power feed is connecting the power cable from the power distribution boar d directly to the Power Cabinet terminal board. Make sure that the facility administrator or a qualif ied ...

  • Fujitsu M8000 - page 91

    Chapter 2 Environmental and Electrical Specifications 2-21 2.4.2 Cir cuit Br eaker Capacity and Characteristics As a condition for maintaining the linked protection that would trip a system cir cuit breaker befor e a circuit br eaker in your distribution panel in the SP ARC Enterprise M8000/M9000 server , the circuit br eakers in your distribution ...

  • Fujitsu M8000 - page 92

    2-22 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 FIGURE 2-10 Circuit Br eaker Characteristics of Customers' Power Distribution Boards D C B 1 2 3 4 5 6 7 8 10 20 30 40 50 80 100 1.5 15 0.01 0.02 0.04 0.06 0.1 0.2 0.4 0.6 1 2 4 6 10 20 40 1 2 4 6 10 60 40 20 120 180 Operating time Minute Second Current (scaled in ...

  • Fujitsu M8000 - page 93

    Chapter 2 Environmental and Electrical Specifications 2-23 2.4.3 Gr ounding Grounding for Single-phase Power Supply SP ARC Enterprise M8000/M9000 servers used with a single-phase power supply ships with a grounded (thr ee-wire) power cable. The power cable must always be connected to a power outlet that has a grounding receptacle. Grounding for Thr ...

  • Fujitsu M8000 - page 94

    2-24 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 ...

  • Fujitsu M8000 - page 95

    Abbreviations-1 CHAPTER Abbr eviations A ACS AC Section ACSTPH ACS Three-Phase B BP Backplane BUI Browser User Interface C CMB CPU Memory Board CMU CPU/Memory Board Unit CLI Command Line Interface CLKU Clock Control Unit CPUM CPU Module D DA T Digital Audio T ape DDC DC to DC Converter DPF Dual Power Feed DR Dynamic Reconfiguration DVDU Digital V e ...

  • Fujitsu M8000 - page 96

    Abbreviations-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007 P PCICS PCI Cassette PCI-ES PCI-Express Short PFC Power Factor Corr ection PHP PCI Hot Plug POST Power-On Self-T est PSU Power Supply Unit R RCI Remote Cabinet Interface RDPF Rack Mountable Dual Power Feed S SAS Serial Attached SCSI SA T A Serial A T A (Adva ...

  • Fujitsu M8000 - page 97

    Index-1 Index C cabinet stabilization measures, 1-31 circuit br eaker capacity and characteristics, 2-19 blockade character of circuit br eaker, 2-19 circuit br eaker capacity of customer panel board, 2-19 cooling specifications, 2-7 airflow and heat dissipation, 2-8 cooling (air-conditioning) r equirements, 2-7 E electrical specifications, 2-1, ...

  • Fujitsu M8000 - page 98

    Index-2 SP ARC Enter prise M8000/M9000 Ser vers Site Planning Guide • September 2007 ...

  • Fujitsu M8000 - page 99

    ...

  • Fujitsu M8000 - page 100

    Herausgegeben von / Published by Fujitsu Siemens Computers Gmb H *U416 85-J-Z81 6-2-76 * U41685- J-Z816-2 -76 Bes tell- Nr ./ Order No .: U41685-J- Z816-2-7 6 ...

Manufacturer Fujitsu Category Home Theater Server

Documents that we receive from a manufacturer of a Fujitsu M8000 can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- M8000 manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu M8000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu M8000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu M8000, service manual, brief instructions and user manuals Fujitsu M8000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu M8000.

Similar manuals

A complete manual for the device Fujitsu M8000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu M8000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu M8000.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu M8000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu M8000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu M8000, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu M8000 - which should help us in our first steps of using Fujitsu M8000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu M8000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu M8000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu M8000?

Use the form below

If you did not solve your problem by using a manual Fujitsu M8000, ask a question using the form below. If a user had a similar problem with Fujitsu M8000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)