Manual Oregon Scientific WRS368

14 pages 2.44 mb
Download

Go to site of 14

Summary
  • Oregon Scientific WRS368 - page 1

    Music Sphere Wireless Remote Speaker System Model: WRS368 User Manual WRS368 Eng (US) Cover R18 OP 7/30/05, 10:51 AM 1 ...

  • Oregon Scientific WRS368 - page 2

    EN 1 IMPORT ANT SAFETY INSTRUCTIONS The Music Sphere Wireless Remote Speaker System is designed to give you years of service if handled properly . Ensure that you heed all warnings to minimize product malfunction and reduce the chances of incurring personal injury . Before using the unit, observe the following guidelines to ensure proper care and m ...

  • Oregon Scientific WRS368 - page 3

    EN 2 PROTECTIVE A TT ACHMENT PLUG The product is equipped with an attachment plug having overload protection. This is a safety feature. See user manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by Oregon Scientific that has the same ...

  • Oregon Scientific WRS368 - page 4

    EN 3 • Stains on the unit should be wiped off with a soft, lint-free cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean. Remember to unplug the unit from the wall outlet before cleaning. • Never use alcohol, solvent, aerosol cleaners, chemical, paint thinner or b ...

  • Oregon Scientific WRS368 - page 5

    EN 4 Music Sphere Wireless Remote Speaker System Model: WRS368 USER MANUAL CONTENTS Important Safety Instructions ................................. 1 Maintenance ............................................................. 2 Contents ................................................................... 4 Introduction ................................ ...

  • Oregon Scientific WRS368 - page 6

    EN 5 1 4 5 3 2 2 1 3 4 NOTE INTRODUCTION Thank you for selecting the Oregon Scientific TM Music Sphere Wireless Remote Speaker System (WRS368) as your personal product of choice. The Wireless Remote Speaker is an ultra-portable unit that lets you listen to audio from almost anywhere in the home or office regardless of where the audio source is loca ...

  • Oregon Scientific WRS368 - page 7

    EN 6 1 4 5 2 3 Max: 30 meters (98 feet) Audio source 12 3 CONTROL P ANEL 1. Clock set 2. Mute 3. V olume down 4. Audio source selection 5. Remote learner 6. Equalizer 7. V olume up 8. Power on / off LCD DISPLA Y 1 2 3 4 5 6 7 8 9 10 12 11 13 14 1. V olume bar 2. Reception status 3. Bass and treble 4. Mute on / off 5. Clock 6 . Learning function - v ...

  • Oregon Scientific WRS368 - page 8

    EN 7 1. Connect the AC adaptor connector into the DC IN 9V jack at the back of the T ransmitter. 2. Plug your AC adaptor into an electrical socket. Always use the supplied 9V AC power adaptor that is designed specifically for the T ransmitter only . Using any other AC power adaptor may cause the unit to malfunction and increase the risk of fire or ...

  • Oregon Scientific WRS368 - page 9

    EN 8 NOTE NOTE TIP NOTE NOTE NOTE NOTE In a non-controlled environment, many factors can affect battery life, such as volume, LCD backlight and temperature. When the batteries are not used for a long period of time, remove them to save battery power . When the batteries are becoming low on power , appears on the right side of the LCD and the LCD ba ...

  • Oregon Scientific WRS368 - page 10

    EN 9 NOTE NOTE If you increase (or decrease) the volume while the speaker is on mute, the Mute function will deactivate and the volume will turn on again. ADJUSTING BASS AND TREBLE Adjusting the Wireless Remote Speaker's bass and treble settings allows the device to playback audio with a different range of sound and tonal ef fects. T o adjust ...

  • Oregon Scientific WRS368 - page 11

    EN 10 TIP TIP TIP LEARNING TO ACTIV A TE THE MUTE FUNCTION USING THE AUDIO SOURCE REMOTE CONTROL DEVICE T o teach your remote control device to activate the Mute function: 1. Press the button 3 times or once if you were previously learning to decrease volume. and will appear flashing simultaneously on the LCD for 3 seconds. will remain flashing whi ...

  • Oregon Scientific WRS368 - page 12

    EN 11 NOTE The Remote Repeat function is valid only after the remote control device of an audio source previously learned at least 1 Remote Learning function successfully . If the audio source (for example, audio source ) is a DVD player and its remote control device has successfully undergone Remote Learning, the Wireless Remote Speaker will remem ...

  • Oregon Scientific WRS368 - page 13

    EN 12 The wrong audio source may have been selected. Check that the correct source is selected and make sure to point the remote control device directly toward the infrared sensor . The Wireless Remote Speaker supports an overwhelming majority of infrared remote control devices operating on a different range of frequencies. However , Oregon Scienti ...

  • Oregon Scientific WRS368 - page 14

    EN 13 NOTE W ARNING FCC ST A TEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly ...

Manufacturer Oregon Scientific Category Speaker System

Documents that we receive from a manufacturer of a Oregon Scientific WRS368 can be divided into several groups. They are, among others:
- Oregon Scientific technical drawings
- WRS368 manuals
- Oregon Scientific product data sheets
- information booklets
- or energy labels Oregon Scientific WRS368
All of them are important, but the most important information from the point of view of use of the device are in the user manual Oregon Scientific WRS368.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Oregon Scientific WRS368, service manual, brief instructions and user manuals Oregon Scientific WRS368. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Oregon Scientific WRS368.

A complete manual for the device Oregon Scientific WRS368, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Oregon Scientific WRS368 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Oregon Scientific WRS368.

A complete Oregon Scientific manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Oregon Scientific WRS368 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Oregon Scientific WRS368, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Oregon Scientific WRS368, that we can find in the current document
3. Tips how to use the basic functions of the device Oregon Scientific WRS368 - which should help us in our first steps of using Oregon Scientific WRS368
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Oregon Scientific WRS368
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Oregon Scientific WRS368 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Oregon Scientific WRS368?

Use the form below

If you did not solve your problem by using a manual Oregon Scientific WRS368, ask a question using the form below. If a user had a similar problem with Oregon Scientific WRS368 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)