Manual MSi G52-M7031X1

75 pages 4.67 mb
Download

Go to site of 75

Summary
  • MSi G52-M7031X1 - page 1

    i RS350M G52-M7031X1 MS-7031 (v1.X) M-A TX Mainboard ...

  • MSi G52-M7031X1 - page 2

    ii Manual Rev: 1.0 Release Date: September 2004 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in ...

  • MSi G52-M7031X1 - page 3

    iii Copyright Notice The material in this document is the intellectual property of MICRO-ST AR INTERNA TIONAL . We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. T rademarks All ...

  • MSi G52-M7031X1 - page 4

    iv 1. Always read the safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Keep this equipment away from humidity. 4. Lay this equipment on a reliable flat surface before setting it up. 5. The openings on the enclosure are for air convection hence protects the equip- ment from overheating. Do not cover the openings. ...

  • MSi G52-M7031X1 - page 5

    v CONTENTS FCC-B Radio Frequency Interference Statement ........................................................ i i Copyright Notice ........................................................................................................... i i i Revision History ..................................................................................... ...

  • MSi G52-M7031X1 - page 6

    vi Fan Power Connectors: CPUF AN1/SYSFAN1 .......................................... 2-14 Hard Disk Connectors: IDE1 & IDE2 ........................................................... 2-15 CD-In Connector: JCD1 ............................................................................... 2-16 SPDIF-Out Connector: JSPD1 (Optional) ............ ...

  • MSi G52-M7031X1 - page 7

    vii Playing KaraOK .................................................................................................. 4-10 Chapter 5. Introduction to A Ti IXP 300 SA T A RAID .......................................... 5 -1 Introduction .......................................................................................................... 5 -2 BI ...

  • MSi G52-M7031X1 - page 8

    1-1 Getting Started Thank you for purchasing RS350M Series (MS-7031) v1.X Micro A TX mainboard. The RS350M Series is based on AT I ® Radeon 9100 IGP Pro & AT I ® IXP 300 chipsets and provides 8 USB 2.0 ports for high-speed data transmission. With all these special designs, the RS350M Series delivers a high performance and pro- fessional deskt ...

  • MSi G52-M7031X1 - page 9

    1-2 MS-7031 Micro A TX Mainboard Mainboard Specifications CPU h Socket 478 for P4 processors (Northwood/Prescott) at 400/533/800 MHz h Supports up to 3.4GHz. h Hyper-Threading CPU. (For the latest information about CPU, please visit http://www.msi.com.tw/program/ products/mainboard/mbd/pro_mbd_cpu_support.php) Chipset h A TI Radeon 9100 IGP Pro - S ...

  • MSi G52-M7031X1 - page 10

    1-3 Getting Started - 1 Line-In/Line-Out/Mic-In port - 1 RJ-45 LAN connector - 1 IEEE 1394 port (Optional) - 1 CD-IN pin header IEEE1394 (Optional) h VIA VT6307 PCI Controller with integrated PHY (optional) h Supports 2 1394 ports (Rear x1 / Front x 1) Audio h AC97 link controller integrated in A TI IXP 300. h 6 channels S/W audio codec Realtek ALC ...

  • MSi G52-M7031X1 - page 11

    1-4 MS-7031 Micro A TX Mainboard Mainboard Layout RS350M Series (MS-7031) v1.X Micro A TX Mainboard D I M M 2 D I M M 4 D I M M 1 D I M M 3 AGP Slot T: m o u s e B: keyboard T: Line-Out B:Mic Line-In M: JAUD1 JTV 1 (Optional) JSPD1 (Optional) JCD1 C o d e c V I A V t 6 3 0 7 ( O p t i o n a l ) R T L 8 1 0 0 C B A T T + BIOS Winbond W8362 7THF AT I ...

  • MSi G52-M7031X1 - page 12

    1-5 Getting Started MSI Special Features Live Update The Live Update 3™ is a tool used to detect and update your BIOS/ drivers/VGA BIOS/VGA Driver/OSD/Utility online so that you don’t need to search for the correct BIOS/driver version throughout the whole W eb site. T o use the function, you need to install the “MSI Live Update 3” applicati ...

  • MSi G52-M7031X1 - page 13

    1-6 MS-7031 Micro A TX Mainboard Core Center CoreCenter is just like your PC doctor that can detect, view and adjust the PC hardware and system status during real time operation. In the left side it shows the current system status including the Vcore, 3.3V, +5V and 12V. In the right side it shows the current PC hardware status such as the CPU & ...

  • MSi G52-M7031X1 - page 14

    1-7 Getting Started Left-wing: Current system status In the left sub-menu, you can configure the settings of FSB, Vcore, Memory V oltage and AGP V oltage by clicking the radio button next to each item and make it available (the radio button will be lighted as yellow when selected), use the “ + ” and “ - ” buttons to adjust, then click “OK ...

  • MSi G52-M7031X1 - page 15

    2-1 Hardware Setup Chapter 2. Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard. Also, it provides the instructions on connecting the peripheral devices, such as the mouse, keyboard, etc. While doing the installation, be careful in holding the comp ...

  • MSi G52-M7031X1 - page 16

    2-2 MS-7031 Micro A TX Mainboard B A T T + Quick Components Guide JAUD1 , p.2-17 JTV1 , p.2-20 CPU , p.2-3 Back Panel I/O , p.2-9 CPU_FAN1 , p.2-14 FDD1 , p.2-14 SATA1, SATA2 p.2-18 JCD1 , p.2-16 JFP1 , p.2-17 SYSFAN1 , p.2-14 DDR DIMMs , p.2-6 IDE2 , p.2-15 JSPD1 , p.2-16 AGP slot , p.2-22 JUSB1~2 , p.2-16 J1394_1, p.2-19 PCI slots , p.2-22 IDE1 , ...

  • MSi G52-M7031X1 - page 17

    2-3 Hardware Setup Central Processing Unit: CPU Example of CPU Core Speed Derivation Procedure If CPU Clock = 133MHz Core/Bus ratio = 23 then CPU core speed = Host Clock x Core/Bus ratio = 133MHz x 23 = 3.06 GHz The mainboard supports Intel ® Pentium ® 4/Celeron Northwood/Prescott proc- essor in the 478 pin package. The mainboard uses a CPU socke ...

  • MSi G52-M7031X1 - page 18

    2-4 MS-7031 Micro A TX Mainboard 1. Please turn off the power and unplug the power cord before installing the CPU. 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle. 3. Look for the cut edge. The cut edge should point towards the lever pivot. The CPU can only fit in the correct orientation. 4. I ...

  • MSi G52-M7031X1 - page 19

    2-5 Hardware Setup 5. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board. Installing the CPU Fan As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly important. T o dissipate heat, you need to attach the CPU cooling fan and heatsink on top of the ...

  • MSi G52-M7031X1 - page 20

    2-6 MS-7031 Micro A TX Mainboard Memory DDR DIMM Slots (DIMM 1~4, from left to right) Channel A: DIMM1 & DIMM2 (green) Channel B: DIMM3 & DIMM4 (purple) The mainboard provides 4 slots for 184-pin, 2.5V DDR DIMM with 8 memory banks. Y ou can install DDR266 / DDR333 / DDR400 SDRAM modules on the DDR DIMM slots (DIMM 1~4). T o operate properly ...

  • MSi G52-M7031X1 - page 21

    2-7 Hardware Setup Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket. 3. The plastic clip at each side of th ...

  • MSi G52-M7031X1 - page 22

    2-8 MS-7031 Micro A TX Mainboard Power Supply The mainboard supports A TX power supply for the power system. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused. A TX 20-Pin Power Connector: A TX1 This connector allows you to connect to an A TX power supply ...

  • MSi G52-M7031X1 - page 23

    2-9 Hardware Setup The back panel provides the following connectors: Back Panel Mouse Keyboard U S B Parallel COM 1 VGA (Optional) L-out L-in MIC USB LAN (Optional) (Optional) 1394 Keyboard Connector The mainboard provides a standard PS/2 ® keyboard mini DIN connector for attaching a PS/2 ® keyboard. Y ou can plug a PS/2 ® keyboard directly into ...

  • MSi G52-M7031X1 - page 24

    2-10 MS-7031 Micro A TX Mainboard RJ-45 LAN Jack: 10/100 LAN (8100C) /Giga-bit LAN (81 10SB) (Optional) The mainboard provides two standard RJ-45 jacks for connection to Local Area Network (LAN). Giga-bit LAN enables data to be transferred at 1000, 100 or 10Mbps. Y ou can connect a network cable to either LAN jack. The pin assignments vary dependin ...

  • MSi G52-M7031X1 - page 25

    2-11 Hardware Setup IEEE1394 Port (Optional) The mainboard provides one standard IEEE1394 port. The stand- ard IEEE1394 port connects to IEEE1394 devices without exter- nal power. The IEEE1394 high-speed serial bus complements USB by providing enhanced PC connectivity for a wide range of devices, including consumer electronics audio/video (A/V) app ...

  • MSi G52-M7031X1 - page 26

    2-12 MS-7031 Micro A TX Mainboard USB Connectors The mainboard provides a UHCI (Universal Host Controller Interface) Universal Serial Bus root for attaching USB devices such as keyboard, mouse or other USB- compatible devices. Y ou can plug the USB device directly into the connector. PIN SIGNAL DESCRIPTION 1 VCC +5 V 2 -Data 0 Negative Data Channel ...

  • MSi G52-M7031X1 - page 27

    2-13 Hardware Setup Parallel Port Connector: LPT1 The mainboard provides a 25-pin female centronic connector as LPT . A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode. 13 1 14 25 PIN SIGNAL DESCRIPTION 1 STROBE Strobe 2 DA T A0 Data0 3 DA T A1 Data1 4 DA T A2 Da ...

  • MSi G52-M7031X1 - page 28

    2-14 MS-7031 Micro A TX Mainboard The mainboard provides connectors to connect to FDD, IDE HDD, case, modem, LAN, USB Ports and CPU/System/Power Supply F AN. Floppy Disk Drive Connector: FDD1 The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. Connectors FDD1 Fan Power Con ...

  • MSi G52-M7031X1 - page 29

    2-15 Hardware Setup Hard Disk Connectors: IDE1 & IDE2 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 function. Y ou can connect up to four hard disk drives, CD-ROM, 120MB Floppy (reserved for future BIOS) and other devices. IDE1 (Primary IDE ...

  • MSi G52-M7031X1 - page 30

    2-16 MS-7031 Micro A TX Mainboard CD-In Connector: JCD1 The connector is for CD-ROM audio connector. SPDIF-Out Connector: JSPD1 (Optional) This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission. Front USB Connectors: JUSB1 / JUSB2 The mainboard provides two standard USB 2.0 ...

  • MSi G52-M7031X1 - page 31

    2-17 Hardware Setup Front Panel Connector: JFP1 The mainboard provides one front panel connector for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel ® Front Panel I/O Connectivity Design Guide. JFP1 1 9 10 2 Reset Switch Power LED Power Switch HDD LED Front Panel Audio Connector: JAUD1 The JAUD1 front panel ...

  • MSi G52-M7031X1 - page 32

    2-18 MS-7031 Micro A TX Mainboard PIN SIGNAL PIN SIGNAL 1 GND 2 TX P 3 TXN 4 GND 5 RXN 6 RX P 7 GND S A T A1 & SA T A2 Pin Definition Connect to serial A T A ports T ake out the dust cover and connect to the hard disk de- vices Serial A T A cable Serial A T A Connectors controlled by A TI IXP 300: SA T A1, SA T A2 The Southbridge of this mainbo ...

  • MSi G52-M7031X1 - page 33

    2-19 Hardware Setup IEEE 1394 Connector: J1394_1 (Optional) The mainboard provides one 1394 pin header that allows you to connect optional IEEE 1394 bracket. Pin Definition PIN SIGNAL PIN SIGNAL 1 T P A + 2 T P A - 3 Ground 4 Ground 5 TPB+ 6 TPB- 7 Cable power 8 Cable power 9 Key (no pin) 1 0 Ground J1394_1 9 2 10 1 How to attach the IEEE 1394 Port ...

  • MSi G52-M7031X1 - page 34

    2-20 MS-7031 Micro A TX Mainboard TV-Out Connector: JTV1 (Optional) The mainboard optionally provides a TV-Out connector for you to attach a TV- Out bracket. The TV-Out bracket offers two types of TV-Out connectors: S-V ideo and RCA Composite connector. Select the appropriate one to connect to the televi- sion and the television will be able to dis ...

  • MSi G52-M7031X1 - page 35

    2-21 Hardware Setup The motherboard provides the following jumpers for you to set the computer’s function. This section will explain how to change your motherboard’s function through the use of jumpers. Jumpers Clear CMOS Jumper: JCMOS1 There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration d ...

  • MSi G52-M7031X1 - page 36

    2-22 MS-7031 Micro A TX Mainboard AGP (Accelerated Graphics Port) Slot The AGP slot allows you to insert the AGP graphics card. AGP is an interface specification designed for the throughput demands of 3D graphics. It introduces a 66MHz, 32-bit channel for the graphics controller to directly access main memory. The mainboard supports one AGP 8x slot ...

  • MSi G52-M7031X1 - page 37

    3-1 BIOS Setup Chapter 3. BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. Y ou may need to run the Setup program when:  An error message appears on the screen during system boot up, and requests you to run SETUP.  Y ou want to change the default settings for custom ...

  • MSi G52-M7031X1 - page 38

    3-2 MS-7031 Micro A TX Mainboard Entering Setup Power on the computer and the system will start POST (Power On Self T est) process. When the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message disappears before you respond and you still wish to enter Setup, restart the system by turning ...

  • MSi G52-M7031X1 - page 39

    3-3 BIOS Setup The Main Menu Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to setup the items of A W ARD ® special enhanced features. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system’s performance. In ...

  • MSi G52-M7031X1 - page 40

    3-4 MS-7031 Micro A TX Mainboard Load Fail-Safe Defaults Use this menu to load the default values set by the BIOS vendor for stable system performance. Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifi- cally for optimal performance of the mainboard. BIOS Setting Password Use this menu to set ...

  • MSi G52-M7031X1 - page 41

    3-5 BIOS Setup Standard CMOS Features Date This allows you to set the system to the date that you want (usually the current date). The format is <day><month> <date> <year>. day Day of the week, from Sun to Sat, determined by BIOS. Read- only. month The month from Jan. through Dec. date The date from 1 to 31 can be keyed by n ...

  • MSi G52-M7031X1 - page 42

    3-6 MS-7031 Micro A TX Mainboard Drive A: This item allows you to set the type of floppy drives installed. Available options: [None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.]. Video The setting controls the type of video adapter used for the primary monitor of the system. Available options are [EGA/VGA ...

  • MSi G52-M7031X1 - page 43

    3-7 BIOS Setup Advanced BIOS Features BIOS Sector Protection The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection. If the function is enabled and any attempt to write data into this area is made, BIOS will display a warning message on screen and beep. Settings: [Disabled] and [Enabled]. Hyper-Threading T echnology T ...

  • MSi G52-M7031X1 - page 44

    3-8 MS-7031 Micro A TX Mainboard Full Screen LOGO Show This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. IOAPIC Function This field is used to enable or disable the APIC (Advanced Programmable Interrupt Contr ...

  • MSi G52-M7031X1 - page 45

    3-9 BIOS Setup Advanced Chipset Features DRAM Clock By Selects whether DRAM clock is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to [By SPD] enables the following fields auto- matically to be determined by BIOS based on the configurations on the SPD. User can specifiy the desired DRAM clock among the setting op ...

  • MSi G52-M7031X1 - page 46

    3-10 MS-7031 Micro A TX Mainboard TRCD When DRAM is refreshed, both rows and columns are addressed separately. This setup item allows you to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less the clock cycles, the faster the DRAM performance. Settings: [1], [2], [3], [4]. TRP This item cont ...

  • MSi G52-M7031X1 - page 47

    3-11 BIOS Setup TV Standard Select the TV standard which is used as the video signal format of your TV if you have connected a TV to the system. Three TV standards are available for the field: [NTSC] NTSC format which is used in United States. [P AL] P AL format. This is a dominant standard in Europe. [P AL-M] P A L format used in Brazil. [P AL-60] ...

  • MSi G52-M7031X1 - page 48

    3-12 MS-7031 Micro A TX Mainboard Integrated Peripherals USB Controller Select [Enabled] if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals. Setting options: [Disabled], [Enabled]. USB 2.0 Controller Set to [Enabled] if you need to use any USB 2.0 device in the operating system that does not support or have ...

  • MSi G52-M7031X1 - page 49

    3-13 BIOS Setup IDE Device Configuration Press <Enter> to enter the sub-menu and the following screen appears: On-Chip IDE Channel0/1 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Choose [Enabled] to activate each channel separately. Setting options: [Enabled], [Disabled]. PCI IDE BusMaster ...

  • MSi G52-M7031X1 - page 50

    3-14 MS-7031 Micro A TX Mainboard SA T A Device Configuration Press <Enter> to enter the sub-menu and the following screen appears: Onboard Serial A T A This item is used to enable/disable the onboard Serial A T A controller . Setting options: [Enabled], [Disabled]. Serial A T A Mode This item is used to set the SA T A configuration. Select [ ...

  • MSi G52-M7031X1 - page 51

    3-15 BIOS Setup Parallel Port Mode SPP : Standard Parallel Port EPP : Enhanced Parallel Port ECP : Extended Capability Port ECP + EPP: Extended Capability Port + Enhanced Parallel Port Normal SPP/EPP/ECP/ECP+EPP T o operate the onboard parallel port as Standard Parallel Port only , choose [SPP]. T o operate the onboard parallel port in the EPP mode ...

  • MSi G52-M7031X1 - page 52

    3-16 MS-7031 Micro A TX Mainboard Power Management Setup ACPI Function This item is to activate the ACPI (Advanced Configuration and Power Management Interface) Function. If your operating system is ACPI-aware, such as Windows 98SE/ 2000/ME/XP, select [Enabled]. Setting options: [Enabled] and [Disabled]. ACPI Standby State This item specifies the p ...

  • MSi G52-M7031X1 - page 53

    3-17 BIOS Setup Wake Up Event Setup Press <Enter> and the following sub-menu appears. Resume by PCI (PME #) This controls how and whether the system can be powered on by the devices installed on PCI slots. Setting options: [Disabled], [Enabled]. POWER ON Function This controls how the PS/2 mouse or keyboard can power on the system. Settings: ...

  • MSi G52-M7031X1 - page 54

    3-18 MS-7031 Micro A TX Mainboard VGA Palette Snoop Bit Setting Action [Disabled] Data read or written by the CPU is only directed to the PCI VGA device’s palette registers. [Enabled] Data read or written by the CPU is directed to both the PCI VGA device’s palette registers and the ISA VGA device’s palette registers, permitting the palette re ...

  • MSi G52-M7031X1 - page 55

    3-19 BIOS Setup Assign IRQ For VGA/USB Set to [Enabled] allows BIOS to assign an IRQ to VGA card/USB device. Choose [Disabled] if you want to release the IRQ. Setting options: [Enabled], [Disabled]. PCI Latency Timer (CLK) This item controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI de ...

  • MSi G52-M7031X1 - page 56

    3-20 MS-7031 Micro A TX Mainboard PC Health Status This section shows the status of your CPU, fan, overall system status, etc. Monitor function is available only if there is hardware monitoring mechanism onboard. CPU W arning T emperature This item is used to specify a thermal limit for CPU. If CPU temperature reaches the specified limit, the syste ...

  • MSi G52-M7031X1 - page 57

    3-21 BIOS Setup Use this menu to specify your settings for frequency/voltage control. Frequency/V oltage Control Current CPU FSB Clock/DRAM Clock These two items show the current clocks of CPU/DRAM. Read-only. CPU Clock Ratio This setting controls the multiplier that is used to determine the internal clock speed of the processor relative to the ext ...

  • MSi G52-M7031X1 - page 58

    3-22 MS-7031 Micro A TX Mainboard Spectrum if you are overclocking because even a slight jitter can introduce a tempo- rary boost in clock speed which may just cause your overclocked processor to lock up. Options: [Disabled], [Enabled]. Adjust CPU FSB Clock This item specifies the clock frequency of CPU host bus (FSB), AGP (3V66) and PCI bus. It pr ...

  • MSi G52-M7031X1 - page 59

    3-23 BIOS Setup Load Fail-Safe/Optimized Defaults The two options on the main menu allow users to restore all of the BIOS settings to the default Fail-Safe or Optimized values. The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard. The Fail-Safe Defaults are the default ...

  • MSi G52-M7031X1 - page 60

    3-24 MS-7031 Micro A TX Mainboard When you select this function, a message as below will appear on the screen: T ype the password, up to eight characters in length, and press <Enter>. The pass- word typed now will replace any previously set password from CMOS memory . Y ou will be prompted to confirm the password. Retype the password and pres ...

  • MSi G52-M7031X1 - page 61

    4-1 Introduction to ALC655 Audio Codec The motherboard is equipped with Realtek ALC655 chip, which pro- vides support for 6-channel audio output, including 2 Front, 2 Rear, 1 Center and 1 Subwoofer channel. ALC655 allows the board to attach 4 or 6 speakers for better surround sound effect. The section will tell you how to install and use 4-/6-chann ...

  • MSi G52-M7031X1 - page 62

    4-2 MS-7031 Micro A TX Mainboard Installing the Audio Driver Y ou need to install the driver for Realtek ALC655 chip to function properly before you can get access to 4-/6-channel audio operations. Follow the procedures described below to install the drivers for different operating systems. Installation for Windows 2000/XP For Windows ® 2000, you ...

  • MSi G52-M7031X1 - page 63

    4-3 Introduction to ALC655 Audio Codec 3. Click Next to start installing files into the system. 4. Click Finish to restart the system. Select this option ...

  • MSi G52-M7031X1 - page 64

    4-4 MS-7031 Micro A TX Mainboard Using the Back Panel In addition to a default 2-channel analog audio output function, the audio con- nectors on the Back Panel also provide 4- or 6-channel analog audio output function if a proper setting is made in the software utility. Read the following steps to have the Multi-Channel Audio Function properly set ...

  • MSi G52-M7031X1 - page 65

    4-5 Introduction to ALC655 Audio Codec 2 3 5 4 6 ...

  • MSi G52-M7031X1 - page 66

    4-6 MS-7031 Micro A TX Mainboard Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility. 2-Channel Mode for Stereo-Speaker Output Refer to the following diagram and caption for the function o ...

  • MSi G52-M7031X1 - page 67

    4-7 Introduction to ALC655 Audio Codec 1 Line Out (Rear channels) * 2 Line Out (Front channels) 3 Line Out (Center and Subwoofer channel) * * Both Line In and MIC function are converted to Line Out func- tion when 6-Channel Mode for 6-Speaker Output is selected. 6-Channel Mode for 6-Speaker Output Refer to the following diagram and caption for the ...

  • MSi G52-M7031X1 - page 68

    4-8 MS-7031 Micro A TX Mainboard T esting the Connected Speakers T o ensure that 4- or 6-channel audio operation works properly , you may need to test each connected speaker to make sure every speaker work properly. If any speaker fails to make sound, then check whether the cable is inserted firmly to the connector or replace the bad speakers with ...

  • MSi G52-M7031X1 - page 69

    4-9 Introduction to ALC655 Audio Codec 4. While you are testing the speakers in 6-Channel Mode, if the sound coming from the center speaker and subwoofer is swapped, you should select Swap Center/ Subwoofer Output to readjust these two channels . Select this function ...

  • MSi G52-M7031X1 - page 70

    4-10 MS-7031 Micro A TX Mainboard Playing KaraOK The KaraOK function will automatically remove human voice (lyrics) and leave melody for you to sing the song. Note that this function applies only for 2-channel audio operation. Playing KaraOK 1. Click the audio icon from the window tray at the lower-right corner of the screen. 2. In the Sound Effect ...

  • MSi G52-M7031X1 - page 71

    5-1 Introduction to A Ti IXP300 SA T A RAID Chapter 5. Introduction to A T i IXP 300 SA T A RAID The southbridge IXP300 provides a hybrid solution that combines two independent SA T A ports for support of up to two Serial A T A (Serial A T A RAID) drives. Serial A T A (SA T A) has the most outstanding features: 1. RAID 0 & 1 2. RAID set accommo ...

  • MSi G52-M7031X1 - page 72

    5-2 MS-7031 Micro A TX Mainboard Introduction RAID - Redundant Array of Independent Disks RAID technology manages multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without loss of data. SA T A RAID provides two RAID Set types, Striping (RAID 0) and Mirroring (RAID 1). ...

  • MSi G52-M7031X1 - page 73

    5-3 Introduction to A Ti IXP300 SA T A RAID BIOS Configuration The A T i RAID should be integrated with the system BIOS on all motherboards with a supported A Ti chipset. Power on the computer , and press <Del> key to enter the BIOS Setup. Y ou need to configure the related settings in BIOS (refer to the SA T A Device Configuration in Integra ...

  • MSi G52-M7031X1 - page 74

    5-4 MS-7031 Micro A TX Mainboard (2) Delete RAID Sets 1. Select the Delete RAID Set in the main menu, and select the desire set and press <Enter>. 2. Press Y when asked “Are Y ou Sure?” 3. The drive will be returned to the original status which the RAID Set can be created. (3) Rebuild Mirrored Set Here you can copy the data from an existi ...

  • MSi G52-M7031X1 - page 75

    5-5 Introduction to A Ti IXP300 SA T A RAID Install Driver in Windows XP / 2000 h New Windows XP / 2000 Installation The following details the installation of the drivers while installing Windows XP / 2000. 1. Start the installation: Boot from the CD-ROM. Press F6 when the message "Press F6 if you need to install third party SCSI or RAID drive ...

Manufacturer MSi Category Computer Hardware

Documents that we receive from a manufacturer of a MSi G52-M7031X1 can be divided into several groups. They are, among others:
- MSi technical drawings
- G52-M7031X1 manuals
- MSi product data sheets
- information booklets
- or energy labels MSi G52-M7031X1
All of them are important, but the most important information from the point of view of use of the device are in the user manual MSi G52-M7031X1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals MSi G52-M7031X1, service manual, brief instructions and user manuals MSi G52-M7031X1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product MSi G52-M7031X1.

Similar manuals

A complete manual for the device MSi G52-M7031X1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use MSi G52-M7031X1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of MSi G52-M7031X1.

A complete MSi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual MSi G52-M7031X1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the MSi G52-M7031X1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the MSi G52-M7031X1, that we can find in the current document
3. Tips how to use the basic functions of the device MSi G52-M7031X1 - which should help us in our first steps of using MSi G52-M7031X1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with MSi G52-M7031X1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of MSi G52-M7031X1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning MSi G52-M7031X1?

Use the form below

If you did not solve your problem by using a manual MSi G52-M7031X1, ask a question using the form below. If a user had a similar problem with MSi G52-M7031X1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)