Manual JBL 300

8 pages 1.49 mb
Download

Go to site of 8

Summary
  • JBL 300 - page 1

    4X 1X 1X 4X 4X 8X 1X INCLUDED ITEMS 1X 3X 15 ft (4.5m) 2X 30 ft (9.0m) THANK YOU FOR CHOOSING THIS JBL ® PRODUCT The Cinema 300 is a complete six-piece home theater speaker system that includes four identical, two-way , video-shielded satellite speakers, a dedicated, voice-matched, video-shielded center speaker with dual midrange drivers an 8-inch ...

  • JBL 300 - page 2

    2 On/Standby LED: When the Power -On Mode Switch is in the “Auto” position, this LED indicates whether the subwoofer is in the On or Standby state: When the LED glows green, the subwoofer is turned on. • • When the LED glows red, the subwoofer is in the Standby mode. When the Power Switch is set to “Off,” the LED will not light up, no m ...

  • JBL 300 - page 3

    3 www .j b l . co m Engli sh PLACING THE SPEAKERS FRONT LEFT AND RIGHT SPEAKERS CENTER SPEAKER SURROUND SPEAKERS AND SUBWOOFER Surround Right Speaker Surround Left Speaker 5 – 6 ft (1.5m – 1.8m) Front Left Speaker Front Right Speaker TV Center Speaker TV 0 – 2 ft (0 – 61cm) Front Left Speaker Front Right Speaker Front Left Speaker TV Center ...

  • JBL 300 - page 4

    4 SPEAKER MOUNTING OPTIONS SHELF-MOUNTING Satellites: Center: 1. 3. 2. WALL-MOUNTING IMPORT ANT SAFETY NOTE: The customer is solely responsible for proper selection and installation of mounting har dware not included with the speakers. JBL disclaims any liability for the selection and installation of mounting hardwar e. Be sure to follow these inst ...

  • JBL 300 - page 5

    5 www .j b l . co m Engli sh + – + – + – FRONT LEFT + – + – SURROUND RIGHT CENTER SPEAKER OUTPUT Wire with Colored Band to “+” T erminal Wire with Colored Band to “+” T erminal Amplifier Speaker CONNECTING THE SPEAKERS CAUTION: Before making speaker connections, be sur e that your receiver or amplifier is turned off and pr eferabl ...

  • JBL 300 - page 6

    6 CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/PROCESSOR WITH A DEDICA TED SUBWOOFER OUTPUT Mono RCA Cable (included) Receiver or Amplifier SUBWOOFER LFE OUT SUB 140P Subwoofer Mono RCA Cable (included) Mono RCA Cable (not included) SUB 140P Subwoofer Receiver or Amplifier PREAMP OUTPUTS PREAMP OUTPUTS MAIN AMP INTPUTS Mono RCA Cable (included) ...

  • JBL 300 - page 7

    7 www .j b l . co m Engli sh OPERA TING THE SUBWOOFER TURNING THE SUBWOOFER ON AND OFF Set the subwoofer’ s Power Switch to the “On” position. If the subwoofer’ s Power -On Mode Switch is set to “Auto,” the • subwoofer will automatically turn itself on when it receives an audio signal, and it will go into Standby mode after it has rec ...

  • JBL 300 - page 8

    SPECIFICA TIONS CINEMA 300 SYSTEM Frequency r esponse: 32Hz – 20kHz (–6dB) CINEMA 300 CENTER SPEAKER Low-frequency transducer: T wo 3" (75mm) PolyPlas cones, video-shielded High-frequency transducer: 1" (25mm) titanium-laminate dome, video-shielded Recommended power handling: 100 watts Nominal impedance: 8 ohms Sensitivity (2.83V/1m): ...

Manufacturer JBL Category Speaker System

Documents that we receive from a manufacturer of a JBL 300 can be divided into several groups. They are, among others:
- JBL technical drawings
- 300 manuals
- JBL product data sheets
- information booklets
- or energy labels JBL 300
All of them are important, but the most important information from the point of view of use of the device are in the user manual JBL 300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JBL 300, service manual, brief instructions and user manuals JBL 300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JBL 300.

Similar manuals

A complete manual for the device JBL 300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JBL 300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JBL 300.

A complete JBL manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JBL 300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JBL 300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JBL 300, that we can find in the current document
3. Tips how to use the basic functions of the device JBL 300 - which should help us in our first steps of using JBL 300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JBL 300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JBL 300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JBL 300?

Use the form below

If you did not solve your problem by using a manual JBL 300, ask a question using the form below. If a user had a similar problem with JBL 300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)