-
Bosch Appliances NDN-921 - page 1
FlexiDomeHD 720p IP Camera NDN-921 en Installation and Operation Manual ...
-
Bosch Appliances NDN-921 - page 2
...
-
Bosch Appliances NDN-921 - page 3
FlexiDomeHD 720p IP Camera Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 T able of Contents 1S a f e t y 8 1.1 Safety precautions 8 1.2 Important safety instructions 9 1.3 Connection in applications 10 1.4 FCC & ICES compliance 11 1.5 MicroSD cards 12 1.6 UL certification 12 1 ...
-
Bosch Appliances NDN-921 - page 4
4 en | Table of Cont ents FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 22 4.1 Unpacking 22 4.2 System requirements 23 5 Installation 24 5.1 Disassembly 24 5.2 Mounting the unit 26 5.2.1 Surface mount 27 5.2.2 Flush mount 28 5.3 Connections 29 5.3.1 Make the connection ...
-
Bosch Appliances NDN-921 - page 5
FlexiDomeHD 720p IP Camera Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.2 Device Access 43 8.2.1 Camera name 43 8.2.2 Password 43 8.3 Date/Time 44 8.4 Network 45 8.5 Encoder 46 8.6 Audio 46 8.7 Recording 46 8.7.1 Storage medium 46 8.8 System Overview 46 9 Advanced Mode 47 9.1 A ...
-
Bosch Appliances NDN-921 - page 6
6 en | Table of Cont ents FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.5.2 Recording Profiles 77 9.5.3 Retention Time 78 9.5.4 Recording Scheduler 79 9.5.5 Recording Status 80 9.6 Alarm 81 9.6.1 Alarm Connections 81 9.6.2 Video Content Analyses (VCA) 84 9.6.3 VCA configuration ...
-
Bosch Appliances NDN-921 - page 7
FlexiDomeHD 720p IP Camera Table of Cont ents | en 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.1.8 Audio communication 115 10.2 Recordings page 116 10.2.1 Controlling playback 116 11 Troubleshooting 118 11.1 Function test 118 11.2 Resolving problems 119 11.3 Customer service 121 12 Maintenance 122 1 ...
-
Bosch Appliances NDN-921 - page 8
8 en | Saf e ty Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electric ...
-
Bosch Appliances NDN-921 - page 9
FlexiDomeHD 720p IP Camera Safety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions be fore operating the unit. 1. C ...
-
Bosch Appliances NDN-921 - page 10
10 en | Saf e ty Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.3 Connection in applications Power lines: An outdoor system should not be located in the vicinity of overhead power lin es, electrical lights, or power circuits, or where it may contac t such power lines or circuit ...
-
Bosch Appliances NDN-921 - page 11
FlexiDomeHD 720p IP Camera Safety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.4 FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . Thes e limits are designed ...
-
Bosch Appliances NDN-921 - page 12
12 en | Saf e ty Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.5 MicroSD c ards Some microSD cards have been foun d to generate high levels of electromagnetic interference that can disturb the normal behavior of some telecom or me dical equipment. We advise you to choose and t ...
-
Bosch Appliances NDN-921 - page 13
FlexiDomeHD 720p IP Camera Safety | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.7 Bosch notices Video / Recording loss Bosch Security systems reco mmends that local storage on microSD card should only be used for alarm recordin g and Automatic Network Replenis hment (ANR) applications. To minimiz ...
-
Bosch Appliances NDN-921 - page 14
14 en | Saf e ty Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.8 Copyrights The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "A dobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following c ...
-
Bosch Appliances NDN-921 - page 15
FlexiDomeHD 720p IP Camera Introduction | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 2 Introduction 2.1 F eature s The FlexiDomeHD 720p IP Day/Night camera is a small, discreet, impact-resistant, survei llance dome containing a high- performance Day/Night camera with integral varifocal lens. The c ...
-
Bosch Appliances NDN-921 - page 16
16 en | Introd uction Fl exiDomeHD 7 20p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems – Multicast function for simultaneous picture transmission to multiple receivers – Integrated Ethernet interface (10/100 Base-T) – Power-over-Ether net (PoE) – Remote control of all built-in functions v ...
-
Bosch Appliances NDN-921 - page 17
FlexiDomeHD 720p IP Camera Syst em Information | en 17 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3 Syst em Information 3.1 Over view of functions The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 ...
-
Bosch Appliances NDN-921 - page 18
18 en | Syst em Inf ormation FlexiDom eHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.1.4 ONVIF (Ope n Network Video Interface Forum) The camera complies to the ONVIF standard which means that it is easier to install and inte grate into larger systems. The ONVIF standard is a global stan ...
-
Bosch Appliances NDN-921 - page 19
FlexiDomeHD 720p IP Camera Syst em Information | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3.1.11 Encryption The unit offers a variety of options fo r protection against unauthorized reading. Web browser connections can be protected using HTTPS. Protect the control channels via the SSL encryption ...
-
Bosch Appliances NDN-921 - page 20
20 en | Syst em Inf ormation FlexiDom eHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.2 Operation with external sy stems The camera can be used with a variety of Bosch software and hardware systems: – Bosch Video Management System – Bosch Video Client – Bosch Recording Station – ...
-
Bosch Appliances NDN-921 - page 21
FlexiDomeHD 720p IP Camera Syst em Information | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 camera, such as controlling relays , remote control of peripheral devices, and remote configuration. It can use alarm inputs to trigger actions and, when motion detection Motion+ is active, can record the r ...
-
Bosch Appliances NDN-921 - page 22
22 en | Planning FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 4.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – Integrated FlexiDomeHD 720p IP camera unit – Mounting hardware kit – Special screwdriver bit for tamper-res ...
-
Bosch Appliances NDN-921 - page 23
FlexiDomeHD 720p IP Camera Planning | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 4.2 System r equirements – Computer with Windows XP/Vista operating system, network access, and Microsof t Internet Explorer web browser version 7.0 or later or – Computer with Windows XP/Vista operating system, n ...
-
Bosch Appliances NDN-921 - page 24
24 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5 Installation 5.1 Disassembly The camera/housing unit consists of the following parts: CAUTION! Installation should only be perfor med by qualified service personnel in accordance with th e National Electrical ...
-
Bosch Appliances NDN-921 - page 25
FlexiDomeHD 720p IP Camera Installation | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 To disassemble the unit proceed as follows: 1. Using the special screwdriver bit, loosen the three tamper- resistant screws in the dome trim ring (the screws remain in place). 2. Remove the dome by pulling it off ...
-
Bosch Appliances NDN-921 - page 26
26 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.2 Mounting the unit There are several ways to mount the unit. The method of mounting depends on the type of surface and whether other mounting hardware, such as an electrical box, a surface box or other access ...
-
Bosch Appliances NDN-921 - page 27
FlexiDomeHD 720p IP Camera Installation | en 27 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.2.1 Surface mount Figure 1 Sur face mounting When using the surface mount box: 1. With a side connection, remo ve the cap covering the side entrance. With a rear connection, leave the cap in place. 2. Attach the ...
-
Bosch Appliances NDN-921 - page 28
28 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.2.2 Flush mount Figure 1 Flush mounting 5 7 .6 (2.27) 5 7 .6 (2.27) 33.3 (1. 31 ) 66.5 (2.62) PCD: 133 (5.25) Ø 8 mm 3x Ø 8 mm 3x 111 (4. 4) ...
-
Bosch Appliances NDN-921 - page 29
FlexiDomeHD 720p IP Camera Installation | en 29 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.3 Connections 5.3.1 Make the connections The unit has connection terminals on flying leads . In wet or outdoor installations make use o f a field wiring box with Nema3 or IP55 protection level or better. Make th ...
-
Bosch Appliances NDN-921 - page 30
30 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Network (and PoE) connection 1. Use a shielded twisted pair (STP) Category 5e cable, maximum length 100 meters. 2. Use the RJ45 female-to-female network cable connector to connect the network cable of the system ...
-
Bosch Appliances NDN-921 - page 31
FlexiDomeHD 720p IP Camera Installation | en 31 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Alarm output Use the alarm relay output for switching external devices such as lamps or sirens. – Maximum voltage 30 VAC or 40 VDC; maximum 0.5 A continuous, 10 VA. – Refer to the cable tree table to identify ...
-
Bosch Appliances NDN-921 - page 32
32 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.3.3 MicroSD card slot Insert a microSD card into the slot. 5.3.4 Indication LED The multicolored LED indicates Power (red), IP connection (green) and IP traffic (green flashing). It can be disabled in the inst ...
-
Bosch Appliances NDN-921 - page 33
FlexiDomeHD 720p IP Camera Installation | en 33 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.4 Camer a positioning The physical default position of the camera is that the bottom of the image correspond s to the indication BOTTOM on the housing. The camera module position can be adjusted along three axes ...
-
Bosch Appliances NDN-921 - page 34
34 en | Installati on Flexi DomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems display on the monitor is level. Set the camera to the desired position by perfor ming the following steps: – For horizontal adjustment (p an), rotate the camera module in the base. Do not rotate more than 360 ...
-
Bosch Appliances NDN-921 - page 35
FlexiDomeHD 720p IP Camera Installation | en 35 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.6 Closing the unit When the camera position is se t and all adjustments have been made, close the unit. 1. If necessary, remove the adjustment cap from the lens. 2. Place the inner liner in position aligning its ...
-
Bosch Appliances NDN-921 - page 36
36 en | Camera se t-up FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 6 Camera set-up The camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out via the network using a web browser. The camera has a set-up m ...
-
Bosch Appliances NDN-921 - page 37
FlexiDomeHD 720p IP Camera Camera set-up | en 37 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 6.2 Day/Night switching The camera is equipped with a motorized I R filter. The mechanical IR filter can be removed in low-light or IR illuminated applications by so ftware configuration settings. If Auto switchi ...
-
Bosch Appliances NDN-921 - page 38
38 en | Brow ser connection FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7 Bro wser connection A computer with Microsoft Intern et Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The camera is configured over the network ...
-
Bosch Appliances NDN-921 - page 39
FlexiDomeHD 720p IP Camera Brow ser connection | en 39 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.2 Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default addr ess pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the I ...
-
Bosch Appliances NDN-921 - page 40
40 en | Brow ser connection FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7.4 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application titl e bar displays three items: LIVEPAGE , RECORDINGS , SETTINGS . Note: The RECORDINGS lin ...
-
Bosch Appliances NDN-921 - page 41
FlexiDomeHD 720p IP Camera Brow ser connection | en 41 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.4.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing the configuration menu is opened . All settings are stored in the came ...
-
Bosch Appliances NDN-921 - page 42
42 en | Basic Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8B a s i c M o d e 8.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic Mode menu to exp ...
-
Bosch Appliances NDN-921 - page 43
FlexiDomeHD 720p IP Camera Basic Mode | en 43 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.2 Device Access 8.2.1 Camera name Assign a name to assist in identification. This name simplifies the management of multiple devices in more extensive systems. The name is used for remote iden tification, for exam ...
-
Bosch Appliances NDN-921 - page 44
44 en | Basic Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set . Therefore, click Set immediately after entering and confirming the password ...
-
Bosch Appliances NDN-921 - page 45
FlexiDomeHD 720p IP Camera Basic Mode | en 45 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.4 Net wo rk Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make the desired changes. ...
-
Bosch Appliances NDN-921 - page 46
46 en | Basic Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8.5 Encoder Select a profile for encoding the vide o signal. Pre-programmed profiles are available that give pr iority to different parameters. When a profile is selected, its details are displayed. 8.6 Audio Switch ...
-
Bosch Appliances NDN-921 - page 47
FlexiDomeHD 720p IP Camera Advanced Mode | en 47 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9 Advanced Mode 9.1 Advan ced Mode menu tre e The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mode menu to expand it ...
-
Bosch Appliances NDN-921 - page 48
48 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2 G eneral 9.2.1 Identification Camera ID Each device should be assigned a unique identifier that can be entered here as an addition al means of identification. Camera name Assign a name to assist in iden tif ...
-
Bosch Appliances NDN-921 - page 49
FlexiDomeHD 720p IP Camera Advanced Mode | en 49 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays. Use the various authorization le vels to limit access. Proper pa ...
-
Bosch Appliances NDN-921 - page 50
50 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their intern al clocks. ...
-
Bosch Appliances NDN-921 - page 51
FlexiDomeHD 720p IP Camera Advanced Mode | en 51 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the list boxes under the table, to change the s ...
-
Bosch Appliances NDN-921 - page 52
52 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay. It can be displayed at the Top , at the Bottom , or a t a ...
-
Bosch Appliances NDN-921 - page 53
FlexiDomeHD 720p IP Camera Advanced Mode | en 53 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.3 W eb Interf ace 9.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necess ary, replace the company's logo (top right) and the device ...
-
Bosch Appliances NDN-921 - page 54
54 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls. 1. Mark the check boxes for ...
-
Bosch Appliances NDN-921 - page 55
FlexiDomeHD 720p IP Camera Advanced Mode | en 55 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Show event log The event messages are displayed with the date and time in a field next to the video image. Uncheck the box to hide the event log on the Livepage . Show system log The system messages are displayed ...
-
Bosch Appliances NDN-921 - page 56
56 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems File for system log Enter the path for saving the syst em log here. If necessary, click Browse to find a suitable folder. ...
-
Bosch Appliances NDN-921 - page 57
FlexiDomeHD 720p IP Camera Advanced Mode | en 57 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4 Camera If the camera is in monochrome mode, all color-related menu items are disabled and cannot be accessed. 9.4.1 Mode Pre-defined modes The camera has six pre-programmed operating modes that can be selecte ...
-
Bosch Appliances NDN-921 - page 58
58 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4. Smart BLC Settings optimized to capture details in high contrast and extremely bright-dark conditions. 5. Low noise Enhancements are set to redu ce picture noise. Useful when conditionally refreshing IP stora ...
-
Bosch Appliances NDN-921 - page 59
FlexiDomeHD 720p IP Camera Advanced Mode | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.2 ALC ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate. A positive value is more useful for low-ligh t conditions; a negative value is more useful ...
-
Bosch Appliances NDN-921 - page 60
60 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Actual shutter Displays the actual shutter va lue from the camera to help compare lighting levels and op timum shutter speed during set- up. Sensitivity up In AES mode, selects the factor by which the se nsitivi ...
-
Bosch Appliances NDN-921 - page 61
FlexiDomeHD 720p IP Camera Advanced Mode | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.4 Day/night The Day/Night camera is equi pped with a motorized IR (infrared) filter. The IR filter can be removed in low-light or IR- illuminated applications. There are four differ ent methods of switching: ...
-
Bosch Appliances NDN-921 - page 62
62 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems IR contrast There are two modes for IR contrast: – Enhanced : the camera optimizes co ntrast in applications with high IR illumination leve ls. Select this mode for IR (730 to 940 nm) light sources and for sce ...
-
Bosch Appliances NDN-921 - page 63
FlexiDomeHD 720p IP Camera Advanced Mode | en 63 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.5 Enhance Dynamic engine – Off: turns off a ll automatic scene detail and enhancements (only recommended for testing). – XF Dynamic : extra internal processing is enabled for low- light applications (traf ...
-
Bosch Appliances NDN-921 - page 64
64 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.4.6 Color White balance – ATW : Auto tracking white balance allows the camera to continually adjust for optimal color reproduction. – AWB hold : Puts ATW on hold and saves th e color settings. –I n Manua ...
-
Bosch Appliances NDN-921 - page 65
FlexiDomeHD 720p IP Camera Advanced Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.7 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures). The camera simultaneously generates two H.264 video streams, an I-frame only s ...
-
Bosch Appliances NDN-921 - page 66
66 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab. Change the name of a prof ile and individual parameter value ...
-
Bosch Appliances NDN-921 - page 67
FlexiDomeHD 720p IP Camera Advanced Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 advantageous with low bandwidths. The image rate in ips (images per second) is displayed n ext to the slider. Video resolution Select the desired resolution fo r the video image. The following resolutions are ava ...
-
Bosch Appliances NDN-921 - page 68
68 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image definition (focus). The value 9 represents maximum imag ...
-
Bosch Appliances NDN-921 - page 69
FlexiDomeHD 720p IP Camera Advanced Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.8 Encoder Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2. Select the codec algorithm for stream 2. The following are available: – Copy Stream 1 ? ...
-
Bosch Appliances NDN-921 - page 70
70 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Note: The JPEG resolution follows the highest resolution setting of either stream 1 or stre am 2. The M-JPEG frame rate can vary depending on system loading. 9.4.9 Privacy Masks Four privacy mask areas can be de ...
-
Bosch Appliances NDN-921 - page 71
FlexiDomeHD 720p IP Camera Advanced Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.11 Installer Menu Synchronization Select the Synchronization method for the camera: – Line lock to lock to the power supply frequency; – Internal for free running camera operation. Ticker bar Switches a t ...
-
Bosch Appliances NDN-921 - page 72
72 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Restore all defaults Click Restore all defaults to restore the fact ory defaults for the camera. A confirmation screen ap pears. Allow 5 seconds for the camera to optimize the pi cture after a mode reset. ...
-
Bosch Appliances NDN-921 - page 73
FlexiDomeHD 720p IP Camera Advanced Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5 Recording Record the images from the camera to local storage media or to an appropriately configured iSCSI system. For long-term authoritative images use an ap propriately si zed iSCSI system. MicroSDHC cards ...
-
Bosch Appliances NDN-921 - page 74
74 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems iSCSI Med ia If an iSCSI system is selected as the storage medium, a connection to the desi red iSCSI system is ne eded to set the configuration parameters. The storage system selected must be available on th e ...
-
Bosch Appliances NDN-921 - page 75
FlexiDomeHD 720p IP Camera Advanced Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 available drives. The medi um is then added to the Managed storage media list. Newly added media is indicated in the Status column by the status Not active . 3. Click Set to activate all media in the Managed stor ...
-
Bosch Appliances NDN-921 - page 76
76 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Deactivating Storage Media Deactivate any storage medium from the Managed storage media list. It is then no lo nger used for recordings. 1. Click a stora ge medium in the Managed s torage media list to select it ...
-
Bosch Appliances NDN-921 - page 77
FlexiDomeHD 720p IP Camera Advanced Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.2 Recording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the recordin g profiles on t ...
-
Bosch Appliances NDN-921 - page 78
78 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interval from profile: box ...
-
Bosch Appliances NDN-921 - page 79
FlexiDomeHD 720p IP Camera Advanced Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be record ed in the event of an alarm. Schedules ...
-
Bosch Appliances NDN-921 - page 80
80 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile name s To change the names of the recording profiles listed in the Time periods bo x: 1. Click a pro file. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recording After complet ...
-
Bosch Appliances NDN-921 - page 81
FlexiDomeHD 720p IP Camera Advanced Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6 Alarm 9.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to t ...
-
Bosch Appliances NDN-921 - page 82
82 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems system such as the Bosch Video Client or the Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Nu ...
-
Bosch Appliances NDN-921 - page 83
FlexiDomeHD 720p IP Camera Advanced Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to display the alarm image. Refe r to the destination device documentation concerning image d ...
-
Bosch Appliances NDN-921 - page 84
84 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorith ms. Such changes can be due to movements in the camera's f ...
-
Bosch Appliances NDN-921 - page 85
FlexiDomeHD 720p IP Camera Advanced Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configuration s. Save profiles on your computer's hard drive and load saved profiles from there. This can be useful if testing a n ...
-
Bosch Appliances NDN-921 - page 86
86 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created for a video conten ...
-
Bosch Appliances NDN-921 - page 87
FlexiDomeHD 720p IP Camera Advanced Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 environmental conditions to which the camera is subject. The sensor reacts to variations in th e brightness of the video image. The darker the observation area, th e higher the value that must be selected. Minimu ...
-
Bosch Appliances NDN-921 - page 88
88 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. ...
-
Bosch Appliances NDN-921 - page 89
FlexiDomeHD 720p IP Camera Advanced Mode | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Scene too bright Activate this function if tamperi ng associated with exposure to extreme light (for instance, s hining a flashlight directly on the objective) should trigger an al arm. The average brightness of ...
-
Bosch Appliances NDN-921 - page 90
90 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. Appearing edges Select this option if the select ed area of the reference image includes a largely h ...
-
Bosch Appliances NDN-921 - page 91
FlexiDomeHD 720p IP Camera Advanced Mode | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active. Schedules can be defined for weekdays an ...
-
Bosch Appliances NDN-921 - page 92
92 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days. ...
-
Bosch Appliances NDN-921 - page 93
FlexiDomeHD 720p IP Camera Advanced Mode | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.5 VCA configuratio n - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event. As long as no trigger is activated, the Si ...
-
Bosch Appliances NDN-921 - page 94
94 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.6 Audio A larm Create alarms based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine nois e or ba ckground noise, are avoided. Set up normal audio t ...
-
Bosch Appliances NDN-921 - page 95
FlexiDomeHD 720p IP Camera Advanced Mode | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a video receiver. In this cas e, the cam ...
-
Bosch Appliances NDN-921 - page 96
96 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sen der, for example, the location of the device. ...
-
Bosch Appliances NDN-921 - page 97
FlexiDomeHD 720p IP Camera Advanced Mode | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.8 Alarm Task Editor Editing scripts on this page ov erwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. To edit this page, you should have programming knowledge and ...
-
Bosch Appliances NDN-921 - page 98
98 en | Advance d Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.7 Interfaces 9.7.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by closing the contact. Select N.O. (Normally Open) if the alar m is t ...
-
Bosch Appliances NDN-921 - page 99
FlexiDomeHD 720p IP Camera Advanced Mode | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Relay name The relay can be assigned a name he re. The name is shown on the button next to Trigger relay . The LIVEPAGE can also be configured to display the name next to the relay icon. (Do not use any special c ...
-
Bosch Appliances NDN-921 - page 100
100 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8 Ne tw ork 9.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make th ...
-
Bosch Appliances NDN-921 - page 101
FlexiDomeHD 720p IP Camera Advanced Mode | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Subnet mask Enter the appropriate subnet mask for the set IP address. Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway he ...
-
Bosch Appliances NDN-921 - page 102
102 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems deactivates all unencrypted conne ctions allowing connections on the HTTPS port only. Configure and activate encryption for media data (video, audio, metadata) on the Encryption page. RCP+ port 1756 Activating R ...
-
Bosch Appliances NDN-921 - page 103
FlexiDomeHD 720p IP Camera Advanced Mode | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 host name for the device on that site. Note: Information about the service , registration process and available host names can be found at DynDNS.org. Host name Enter the host name registered on DynDNS.org for t ...
-
Bosch Appliances NDN-921 - page 104
104 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. ...
-
Bosch Appliances NDN-921 - page 105
FlexiDomeHD 720p IP Camera Advanced Mode | en 105 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 RTSP port If necessary, select a different port from the list for the exchange of the RTSP data. The standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to activate UPnP communi ...
-
Bosch Appliances NDN-921 - page 106
106 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems A special IP address (class D addr ess) must be configured f or multicast operation in a mult icast-enabled network. The network must support group IP addres ses and the Internet Group Management Protocol (IGMP ...
-
Bosch Appliances NDN-921 - page 107
FlexiDomeHD 720p IP Camera Advanced Mode | en 107 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corr esponds to the highest s ...
-
Bosch Appliances NDN-921 - page 108
108 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.5 Encryp tion If an encryption license is installed, this submenu gives access to the encryption parameters. ...
-
Bosch Appliances NDN-921 - page 109
FlexiDomeHD 720p IP Camera Advanced Mode | en 109 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.9 Ser vice 9.9.1 Maintenance Firmware The camera functions and para meters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network. The fi ...
-
Bosch Appliances NDN-921 - page 110
110 en | Advanced Mode FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems The new firmware is unpacked and the Flash memory is reprogrammed. The time remain ing is shown by the message going to reset Reconnecting in ... seconds . When the upload is completed successfully, the de vice ...
-
Bosch Appliances NDN-921 - page 111
FlexiDomeHD 720p IP Camera Advanced Mode | en 111 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Once all files have been successf ully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.168.0.10/reset The new SSL cer ...
-
Bosch Appliances NDN-921 - page 112
112 en | Operation via the browser FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10 Operation via the brow ser 10.1 Liv epage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on t ...
-
Bosch Appliances NDN-921 - page 113
FlexiDomeHD 720p IP Camera Operation via the bro wser | en 113 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.1.2 Image selection View the image on a full screen. – Click a tab below the video image to swi tch between the different display streams of the camera image. Display Stamping Various overlays ...
-
Bosch Appliances NDN-921 - page 114
114 en | Operation via the browser FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed ne xt to the camera image. The alarm symbol is for information and indicates the inpu ...
-
Bosch Appliances NDN-921 - page 115
FlexiDomeHD 720p IP Camera Operation via the bro wser | en 115 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 – Click the camera icon to save single images. The storage location depends on the configuration of the camera. 10.1.6 Recording video sequences Sections of the video sequence that is currently be ...
-
Bosch Appliances NDN-921 - page 116
116 en | Operation via the browser FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Setti ngs page. The Recordings link is only visible if a direct iSCSI or microSD ca rd has been co nfigured fo ...
-
Bosch Appliances NDN-921 - page 117
FlexiDomeHD 720p IP Camera Operation via the bro wser | en 117 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 – If required, drag the green arrow to the point in time at which the playback should begin. – Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate ...
-
Bosch Appliances NDN-921 - page 118
118 en | T roubleshooting FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 11 T roubleshoo ting 11.1 Function te st The camera offers a variety of configuration options. Theref ore, check that it works properly afte r installation and configuration. This is the only way to ensure th ...
-
Bosch Appliances NDN-921 - page 119
FlexiDomeHD 720p IP Camera T roubleshooting | en 119 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 11.2 Resolving problems The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution No image transmission to remote locati ...
-
Bosch Appliances NDN-921 - page 120
120 en | T roubleshooting FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems No audio transmission to remote station. Hardware fault. Check that all connected audio units are operating correctly. Faulty cable connections. Check all cables, plugs, contacts and connections. Incorrect co ...
-
Bosch Appliances NDN-921 - page 121
FlexiDomeHD 720p IP Camera T roubleshooting | en 121 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 11.3 Customer ser vice If a fault cannot be resolved, please contact your supplier or system integrator, or go dire ctly to Bosch Security Systems Customer Servi ce. The version numbers of the internal proces ...
-
Bosch Appliances NDN-921 - page 122
122 en | Maintenance FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 12 Maintenance 12.1 T esting the network connection The ping command can be used to check the con nection between two IP addresses. This allows testing whether a device is active in the network. 1. Open the DOS co ...
-
Bosch Appliances NDN-921 - page 123
FlexiDomeHD 720p IP Camera T echnical Data | en 12 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 13 T echnical Data 13.1 Specifications Type number NDN-921V03 Lens focal length 2.8 to 10 mm F-stop F1.2 Minimum Illumination 1.0 lx color, 30IRE 0.4 lx mono, 30IRE Imager 1/3-inch CCD sensor Rated supply vol ...
-
Bosch Appliances NDN-921 - page 124
124 en | T echnical Data FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Lens type Manual or DC iris auto detect Controls Via web browser or Configuration Manager Control feedback Actual shutter, Actual gain LAN interface 1 × Ethernet 10/ 100 Base-T, automatic adaptation, half/ful ...
-
Bosch Appliances NDN-921 - page 125
FlexiDomeHD 720p IP Camera T echnical Data | en 12 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 13.1.1 Accessories Contact your Bosch representati ve for the latest available accessories. ...
-
Bosch Appliances NDN-921 - page 126
126 en | Glossar y FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Glossar y 0…9 10/100Base-TIEEE-802.3 specification for 1 0 or 100 Mbps Ethernet. 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks . Authentication ...
-
Bosch Appliances NDN-921 - page 127
FlexiDomeHD 720p IP Camera Glossar y | en 12 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 F FTP File Transfer Protocol: Used to transfer files between computers on a network, such as the Internet. Full duplex Simultaneous data transmission in both directions (sending and receiving). G GBIC GigaBit Inter ...
-
Bosch Appliances NDN-921 - page 128
128 en | Glossar y FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems IEEE Institute of Electrical and Electronics Engineers: The world's leading professional associati on for the advancement of technology. IGMP Internet Group Management Pr otocol: A communications protocol used ...
-
Bosch Appliances NDN-921 - page 129
FlexiDomeHD 720p IP Camera Glossar y | en 12 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 M MAC Media Access Control: A quasi-unique identifier attached to most network adapters (NICs). It is a number that acts like a name for a particular network adapter. MIB Management Information Base: a collection o ...
-
Bosch Appliances NDN-921 - page 130
130 en | Glossar y FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems R RADIUS serverRemote Authentication Di al-In User Service: a client/serve r protocol for the authentication, authorization and accounting of users with dial-up connections on a computer network. RADIUS is the de-fa ...
-
Bosch Appliances NDN-921 - page 131
FlexiDomeHD 720p IP Camera Glossar y | en 13 1 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 TLS Transport Layer Security: TLS 1.0 and 1.1 and the standard advanced developments of SSL 3.0 ( see SSL). TTL Time-To-Live: life cycle of a data packet in station transfers. U UDP User Datagram Protocol: One of t ...
-
Bosch Appliances NDN-921 - page 132
132 en | Glossar y FlexiDomeHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems ...
-
Bosch Appliances NDN-921 - page 133
...
-
Bosch Appliances NDN-921 - page 134
Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2011 ...
Do you have a question concerning Bosch Appliances NDN-921?
Use the form below
If you did not solve your problem by using a manual Bosch Appliances NDN-921, ask a question using the form below. If a user had a similar problem with Bosch Appliances NDN-921 it is likely that he will want to share the way to solve it.