English dropdown-ico

Manual Omega Engineering DPC10-CS

6 pages 0.45 mb
Download

Go to site of 6

Summary
  • Omega Engineering DPC10-CS - page 1

    kD Voltage Thresholds: Low 0 to 0.4 V dc High 2.0 to 28 V dc Maximum High 28 V dc PROGRAM ENABLE INPUT (Terminal 5) Operation: Level sensitive (maintained) COUNT ACCURACY Absolute when operated within specifications. DPCl O-CC Inputs A & B are designed for contact closures to dc common. Speed: 0 to 20 Hz Minimum Low Time: 10 milliseconds Minimu ...

  • Omega Engineering DPC10-CS - page 2

    +0.4 V dc or less. Counts are entered on the negative-going edge of the pulse. Page 2 +3 V dc. The sensor must be capable of sinking current from the input to bring the input voltage down to +28 V dc to the input. Counts are entered on the positive-going edge of the pulse. The DPClO-CC has low speed inputs and can accept pulses from solid state, cu ...

  • Omega Engineering DPC10-CS - page 3

    m key. Repeat this process until all digits are set correctly. them key to move the flashing digit one place to the left. Change this digit to the desired value with the m key will cause the numbers to autoscroll. Next press m key until reaching the desired digit value. Note: Pressing and holding the them key to move the decimal point to the desire ...

  • Omega Engineering DPC10-CS - page 4

    , Page 4 (DPCIO-CS) Count Input Current Sink Input (DPCIO-CC) 4 Reset Connect through Contact Closure to Ground 5 Program Connect to Ground to Enter Enable Program Mode (DPClO-CC) 3 Input A Current Source Input (DPClO-CS) Count input Current Sink Input [_Zk Terminal Function Operation 1 Ground 2 Input B Current Source Input (DPClO-CC) PROGRAM MODE ...

  • Omega Engineering DPC10-CS - page 5

    Nothinginthismenualmaybereproducedinanymanner,eitherwhollyorinpa~forenypurpose whatsoever without written permission from OMEGA ENGINEERING, INC. Printed in U.S.A. Page 5 Q Copyright 1993 OMEGA ENGINEERING, INC. All rights reserved including illustrations. (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the ou ...

  • Omega Engineering DPC10-CS - page 6

    @ Laboratory Heaters ENGINEERING INC. One Omega Drive, P.O. Box 4047 Stamford, CT 06907 Tel: (203) 359-1660 Telex: 996404 Cable OMEGA Fax: (203) 359-7700 m Flexible Heaters & Band Heaters fij ’ Immersion & Ship Heaters w Cartridge w Heating Cable & Plotters HEATERS @ Recorders, Printers @ Datalogging Systems & Compatibles m Plug-i ...

Manufacturer Omega Engineering Category Calculator

Documents that we receive from a manufacturer of a Omega Engineering DPC10-CS can be divided into several groups. They are, among others:
- Omega Engineering technical drawings
- DPC10-CS manuals
- Omega Engineering product data sheets
- information booklets
- or energy labels Omega Engineering DPC10-CS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Omega Engineering DPC10-CS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Omega Engineering DPC10-CS, service manual, brief instructions and user manuals Omega Engineering DPC10-CS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Omega Engineering DPC10-CS.

Similar manuals

A complete manual for the device Omega Engineering DPC10-CS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Omega Engineering DPC10-CS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Omega Engineering DPC10-CS.

A complete Omega Engineering manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Omega Engineering DPC10-CS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Omega Engineering DPC10-CS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Omega Engineering DPC10-CS, that we can find in the current document
3. Tips how to use the basic functions of the device Omega Engineering DPC10-CS - which should help us in our first steps of using Omega Engineering DPC10-CS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Omega Engineering DPC10-CS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Omega Engineering DPC10-CS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Omega Engineering DPC10-CS?

Use the form below

If you did not solve your problem by using a manual Omega Engineering DPC10-CS, ask a question using the form below. If a user had a similar problem with Omega Engineering DPC10-CS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)