English dropdown-ico

Manual Cisco Systems SCE8000

150 pages 4.35 mb
Download

Go to site of 150

Summary
  • Cisco Systems SCE8000 - page 1

    Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco SCE80 0 0 Installation and Configuration Guide R ele ase 3 .1 .7 December , 20 08 Custom er Or der Numb er: Text Pa rt Numbe r: OL -16478-0 2 ...

  • Cisco Systems SCE8000 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P ...

  • Cisco Systems SCE8000 - page 3

    i Cisco SCE8000 Ins tallation and Co nfiguration Guide, Rel 3.1.7 OL-16478-02 CONTENTS About t his Guid e ix CHAPTER 1 Cisco Se rvice Control Overview 1-1 Cisco Servi ce Cont rol Solu tion 1-1 Servic e Contr ol for Bro adband Servi ce Provid ers 1-1 Cisco Servic e Con trol Cap abilit ies 1-2 SCE Plat form Desc ripti on 1- 3 Management and Col lecti ...

  • Cisco Systems SCE8000 - page 4

    Cont ent s ii Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cisco SCE 8000 Comp onent Lis t 2-1 4 Cisco SCE 8000 In stal lation Checkl ist 2-1 5 CHAPTER 3 Cisco SCE800 0 Topolog y and Topolo gy-Relate d Parameter s 3- 1 The Cisc o SCE8000 Platfor m 3-1 Topolo gy Consi dera tions 3-1 Phys ical T opolo gies 3-3 SCE8000 ...

  • Cisco Systems SCE8000 - page 5

    Content s iii Cisco SCE8000 Ins tallation and Co nfigu ration Guide, Rel 3.1. 7 OL-16478-02 Instal ling th e Cisco SCE8000 Chassis in the Rack 4-12 Unpacki ng the Cisc o SCE800 0 Chassis 4-12 Insta llati on Gu idel ines 4-12 Requir ed Tools 4-13 Instal ling th e Chassi s Bracket s 4-13 Insta lling the C has sis in the Ra ck 4-14 Instal ling an Opti ...

  • Cisco Systems SCE8000 - page 6

    Cont ent s iv Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cascade d Systems 6-15 How to Inst all a Ca scaded Sys tem 6-15 CLI Command s for Cas caded Systems 6-16 Topolo gy-Rel ated Parameter s for Red undan t Topolog ies 6-16 How to Confi gure the Co nnectio n Mode 6-16 How to Se t th e Link Mo de 6-17 Moni tori n ...

  • Cisco Systems SCE8000 - page 7

    Content s v Cisco SCE8000 Ins tallation and Co nfigu ration Guide, Rel 3.1. 7 OL-16478-02 CHAPTER 8 Troubles hootin g 8-1 Troubl eshoo ting Ov ervi ew 8-1 Infor matio n About Troub lesh ooting To ols 8-2 CLI Command s for Tr ouble shootin g 8-2 Checki ng the LE Ds 8-4 Proble m Solvi ng Using a Sub syste ms Approach 8-6 Identi fying St artu p Proble ...

  • Cisco Systems SCE8000 - page 8

    Cont ent s vi Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Instal ling a Modu le 9-13 Removing a Module 9- 17 Insert ing and Remo ving a Mod ule: Deta il 9-19 Verif ying t he Instal lation 9-20 Removing and Replac ing Shared Port Adapt ers 9-22 Requir ed Tool s and Equip ment 9-22 Laser/ LED Sa fety 9-22 Handli ng S ...

  • Cisco Systems SCE8000 - page 9

    ix Cisco SCE8000 Ins tallation and Co nfiguration Guide, Rel 3.1.7 OL-16478-02 About this Guide This pre face desc ribes w ho shoul d read t he Cisco SCE 8000 Installat ion and Configuration Guide , h ow it is organized, an d its documen t conv entions. This guide is for the netw orking or computer technician responsible for installin g and config ...

  • Cisco Systems SCE8000 - page 10

    x Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 About this Guide Organization The major sections o f this guide are as follo ws: Chapter T itle Description 1 Cisco Servi ce Control Overvi ew , page 1-1 This chapter pro vides a brief introduction to Cisco Serv ice Cont rol. 2 Introdu ction to the Cisco SCE80 00 Platfo ...

  • Cisco Systems SCE8000 - page 11

    xi Cisco SCE8000 Ins tallation and Co nfigu ration Guide, Rel 3.1. 7 OL-16478-02 About this Guide Related Publications Y o ur SCE800 0 pl atform and the so ftware ru nning on it c ontain extensive features and f unctiona lity , which ar e docum ented in the fo llo wing res ource s: • Cisc o CLI s oftw a re: – Cisco S CE8000 Softw ar e Configura ...

  • Cisco Systems SCE8000 - page 12

    xii Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 About this Guide Note Means r eader ta ke no te . Ti p Mean s the follo wing informat ion will he lp you solve a pr oblem . Cautio n Means re a d e r b e c a re f u l . In this situation, you might perfo rm an action that coul d result in equipment dam age or loss of ...

  • Cisco Systems SCE8000 - page 13

    CH A P T E R 1-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 1 Cisco Service Control Overview This chapter pro vides a general o ver vie w of the Cisco Service Control solutio n. It introduces the Cisco service c ontrol co ncept an d capab ilities. It also b riefly d escribes the hardw are capabilit ies of t he ser ...

  • Cisco Systems SCE8000 - page 14

    1-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapte r 1 Cisco Se rvice C ontrol Ove rview Cisco Serv ice Control Capa bilities • Report and an alyze networ k traffic at su bscribe r an d ag gregate level for capaci ty pl anning • Pro vide customer -intu iti ve tiere d application ser vices and guarant ee app ...

  • Cisco Systems SCE8000 - page 15

    1-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 1 Cisco Service Con trol Overview SCE Platform Description SCE Platform Description The SCE fami ly of p rogra mmable network devices perfo rms a pplic ation-l ayer st atef ul-flow insp ection of IP traffic, and con trols the traffi c based on c onfigurabl e r ...

  • Cisco Systems SCE8000 - page 16

    1-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapte r 1 Cisco Se rvice C ontrol Ove rview SCE Platform Descrip tion Figur e 1 -1 SCE Platf or m in the Netw or k LINK R X Cisco SCE 2000 S e r ie s 4xGBE TX R X M M T X LIN K R X TX R X M M T X L I N K R X T X R X MM T X L IN K R X T X RX M M T X G BE -1 S U B LI N ...

  • Cisco Systems SCE8000 - page 17

    1-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 1 Cisco Service Con trol Overview Managem ent and Collect ion Management and Collection The Cisco service cont rol solution incl udes a complete managem ent infrastru cture that prov ides the fol lo win g mana geme nt compon ents to mana ge al l aspe cts o f t ...

  • Cisco Systems SCE8000 - page 18

    1-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapte r 1 Cisco Se rvice C ontrol Ove rview Managem ent and Col lection Subscr iber Manage ment Where t he Cisco serv ice contr ol appli cation for broad band (SCA B B) enfor ces polic ies on di ff erent subscr ibers and trac ks usage on an individual subscribe r bas ...

  • Cisco Systems SCE8000 - page 19

    CH A P T E R 2-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 2 Introduction to the Cisco SCE8000 Platform This cha pter provid es an introduc tion t o the Cisco SCE80 00 10GBE platfo rm, the Se rvice Con trol hardware compo nent . • Informa tion Ab out the SCE Platf orm, pa ge 2-1 • Service Contro l Modu le (SC ...

  • Cisco Systems SCE8000 - page 20

    2-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform Service Contr ol Module (SCE8000 -SCM-E) Figur e 2-1 Ci sco SCE 80 0 0 Pl atform The Cisco SC E8000 suppor ts the foll owing network insertion mo dels: • single a pplianc e (inl ine) • single a pplianc e (r ec ...

  • Cisco Systems SCE8000 - page 21

    2-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform Service Co ntrol Module (SCE8000 -SCM-E) T able 2-2 SCE80 00-SCM-E P or ts Port Quantity Description Connect This Port T o… GBE por t 2 Cur rent ly on ly one GBE po rt is suppor ted. Gigabit Ether net R J-45 po r ...

  • Cisco Systems SCE8000 - page 22

    2-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform Introduction to SIPs and SPA s Introductio n to SIPs and SPAs SIPs a nd SP As ar e a ne w car rier ca rd a nd po rt ada pter ar chitectu re used to in crease modu larity , fle xibility , and density across Cisco S ...

  • Cisco Systems SCE8000 - page 23

    2-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform Introduction to SIPs and SPAs Specifying the SIP Subslo t Location for a SPA Cisco SCE80 00-SIP subslots begin their nu mberin g with “0” an d have a horizont al orienta tion. Figure 2-3 shows the subsl ot num ...

  • Cisco Systems SCE8000 - page 24

    2-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform Introduction to SIPs and SPA s Modular Optics The SP A s impl emen t 10GBE small form -factor pluggabl e (XFP) op tical tra nsceivers to provide n etwork connec tivity . An XFP m odule i s a tran sceiver device th ...

  • Cisco Systems SCE8000 - page 25

    2-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform Introduction to SIPs and SPAs The XFP oper ating temperatur e range is 0°C to 70°C. The SCE8 000-SIP The 1-Port 10 GBE SPA In terface Modu le The SCE800 0-SIP is install ed in slot #3 of the Ci sco SCE8000 c hass ...

  • Cisco Systems SCE8000 - page 26

    2-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform The Cisco SCE8000 Optica l Bypass The Cisco SCE8000 Optical Bypass • Optical Bypass Functionality , page 2-9 • Optical By pass M odule (O PB-SCE8 K), pa ge 2 -9 The Cisco SCE8000 plat form optical bypass mod u ...

  • Cisco Systems SCE8000 - page 27

    2-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform The Cisco SCE8000 Optical By pass • During a p ower failure —Th e Cisco SC E8000 h as two power supplies. A power failure occu rs only when both of th em f ail. In a case wher e the Cisco SCE 8000 platfo rm mus ...

  • Cisco Systems SCE8000 - page 28

    2-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform The Cisco SCE8000 Optica l Bypass • OPB-SCE8K-MM supp orts Multi-Mode optics an d should be used with SCE8000 equip ped with Multi-Mode o ptics. The optical b ypass module is in stalled either in ternally , in ...

  • Cisco Systems SCE8000 - page 29

    2-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform The Cisco SCE8000 Optical By pass Optical Bypass Module Specific ations Fiber Cable Type The fi ber cable type with in the Optical Bypass Mo dule area as follo ws: • OPB-SCE8 K-MM: 50 um core. • OPB-SCE8K-SM: ...

  • Cisco Systems SCE8000 - page 30

    2-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform The Cisco SCE8000 Optica l Bypass Powe r Suppli es The C isco SCE80 00 platfo rm supp orts redu ndant AC- or DC-in put power supplie s. The fol lowing power supplies ar e av ailable for the Cisco SCE8 000 platfor ...

  • Cisco Systems SCE8000 - page 31

    2-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform Checkin g the Shippin g Contai ner Cont ents Power Supply C ooling Po wer supplies ha ve bui lt-in fans and are completely self -cooling. Air enters fro m the right of the fa n and e xits thro ugh the le ft. Load ...

  • Cisco Systems SCE8000 - page 32

    2-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform Checking the Shipping Cont ainer Cont ents Cisco SCE 8000 C omponent L ist Note Cisco does not ship the entire Cisco SCE8000 documentation set automatically with each system. Y ou must specifically ord er the doc ...

  • Cisco Systems SCE8000 - page 33

    2-15 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 2 Introduction to the Cisco SCE800 0 Platform Cisco SCE8000 In stallation Ch ecklist Cisco SCE8000 Installation Checklist T o a ssist y ou wi th your insta llation and to provide a hist orical reco rd of what wa s done by w hom, photocop y the follo wing Cisc ...

  • Cisco Systems SCE8000 - page 34

    2-16 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 2 Intro duction to the Cisco SCE8000 Pl atform Cisco SCE8 000 Install ation Check list ...

  • Cisco Systems SCE8000 - page 35

    CH A P T E R 3-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 3 Cisco SCE8000 Topology and Topology-Related Parameters This c hapter d escrib es the po ssible deployme nt to pologies of the Cisco SCE8000 and explai ns how to configure t he releva nt para mete rs correc tly for ea ch topol ogy . • The Cisc o SCE800 ...

  • Cisco Systems SCE8000 - page 36

    3-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Topology Considera tions — W il l the system be used sol ely to monitor tr af fic flo w , with report functionality only , or will it be used f or traf fic fl ow control , with e nforceme nt as we ...

  • Cisco Systems SCE8000 - page 37

    3-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Physica l Topolog ies Physical Topologi es Following are descript ions of a numbe r of physica l topologie s that the Ci sco SCE80 00 supports. • SCE8000 I nterfac e Numb ering, page 3-3 • Single ...

  • Cisco Systems SCE8000 - page 38

    3-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Physical To pologies Single Link: Inline Topology T ypi cally , the Cisc o SCE8000 is connect ed i n a full dupl ex 10GB E link betwee n two devices (Route r , BRAS, etc.). When the Cisco SCE8000 is ...

  • Cisco Systems SCE8000 - page 39

    3-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Physica l Topolog ies Single Link: Receive-only Topology In this topology , an optical splitter resides physically on the 10GBE link between the subscribers and the networ k. The traf f ic passes thr ...

  • Cisco Systems SCE8000 - page 40

    3-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Physical To pologies Figur e 3-5 Dua l Link: Receiv e-Only T opolo gy Note When implementing re cei ve- only topologi es with a switch, th e switch must suppo rt SP AN function ality that incl udes s ...

  • Cisco Systems SCE8000 - page 41

    3-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Physica l Topolog ies • The two Cisco SCE 8000s are simulta neous ly aware of the subscr iber c ontexts, and subscrib er stat es are consta ntly ex changed be tween them, such th at if the pr imary ...

  • Cisco Systems SCE8000 - page 42

    3-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Physical To pologies Type of SCE Platform Redundancy • All Ac tiv e All por ts in the EC and al l SCE pl atfor ms are act i v e. If th ere is a f ailure in one o f the SCE platf orms, the link s on ...

  • Cisco Systems SCE8000 - page 43

    3-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Link Continuity Link Continuity The interna l bypa ss mechanism of the Cisco SCE8000 allo ws tra ff ic to continue to flo w , if desired, e v en if the d ev ice itself is n ot fully f unctioning . In ...

  • Cisco Systems SCE8000 - page 44

    3-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Link Contin uity Figur e 3-9 Optic al Bypass Under Nor mal Operating Conditions If the SCE8000 platform fails, tr aff ic flows throug h the op tical bypass m odule, bypassi ng the SC E8000, so that ...

  • Cisco Systems SCE8000 - page 45

    3-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Topolo gy-Rel ated Pa ramet ers Topology-Rela ted Paramete rs Refer to t he fol lowing sections to de termine the cor rect values fo r all to pology-re lated pa ramete rs before beginning t o run t ...

  • Cisco Systems SCE8000 - page 46

    3-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Topology -Related Parame ters The connec tion m ode parame ter is dete rmine d by the physical dep loyment of the Cisco SCE80 00, a s follows: • Single Cisco SCE8000 inline inst allation = Inline ...

  • Cisco Systems SCE8000 - page 47

    3-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Param eters Asymmetr ic Routi ng Topol ogy In a sing le Cisco SCE800 0 topo logy , the value of this para meter is determ ined by whethe r or not t he link can be compl etely c ut wh en the Cisco SC E8000 fails ...

  • Cisco Systems SCE8000 - page 48

    3-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 3 Cisco SCE8000 Top ology and To pology-Re lated Para meters Asymmet ric Routing To pology ...

  • Cisco Systems SCE8000 - page 49

    CH A P T E R 4-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 4 Installing the Cisco SCE8000 Chassis This chapter describ es how to install a Cisco SCE8000 chassis. War ni n g Before you install, operate, or service the sy stem, read the Regulatory Compliance and Safety Information for the Cisco SCE8000 Platf orm . ...

  • Cisco Systems SCE8000 - page 50

    4-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Prepar ing for Inst allat ion War ni n g Blank faceplates and cover panels serve three im portant functions: they prevent exposure to hazardous voltages and currents inside the chassi s; they contain electromag netic inte ...

  • Cisco Systems SCE8000 - page 51

    4-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Preparing for Installation Preventing Electrost atic Discharge Damage Elec trostat ic disc har ge (ESD) d amage, wh ich can occ ur when electroni c cards o r compo nents are improper ly handled, result s in complete or i ...

  • Cisco Systems SCE8000 - page 52

    4-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Prepar ing for Inst allat ion Follow these re quire ments w hen pr epar ing your site for the Cisc o SCE8 000 inst allati on: • The r edundan t power co nfiguration p rovides a second , iden tica l power supply to ensur ...

  • Cisco Systems SCE8000 - page 53

    4-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Preparing for Installation T ab le 2-5 list s the A C-inp ut power cord option s, speci fications, and Cisco produ ct numbe rs for the 27 00 W A C-input power supplie s. T able 2-5 also refere nces power cord il lustra t ...

  • Cisco Systems SCE8000 - page 54

    4-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Prepar ing for Inst allat ion AC Power Cord Illustrations This section contain s the A C po wer cord illustrati ons. Figur e 4-1 A C Po w er Cord Pl ugs and Appli ance Couple r for the 2700 W P o we r Supply Figur e 4-2 C ...

  • Cisco Systems SCE8000 - page 55

    4-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Preparing for Installation Figur e 4-3 CA B-A C-2500W -EU= Figur e 4-4 CA B-A C-2500W -INT= Figur e 4-5 CA B-A C-2500W -ISRL= Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113360 Connector : IEC 60320 C19 Plug ...

  • Cisco Systems SCE8000 - page 56

    4-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Prepar ing for Inst allat ion Figur e 4-6 CA B-A C-2500W -US1= Figur e 4-7 CAB-A C-C6K-TWLK= Figur e 4-8 CA B-7513A C= Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113362 Connector : IEC 60320 C19 Plug: NEMA 6 ...

  • Cisco Systems SCE8000 - page 57

    4-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Preparing for Installation Figur e 4-9 CA B-7513A CSA= Figur e 4-1 0 CAB-ACS-16= Figur e 4-1 1 CAB-AC-16A -AUS Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113357 Connector : IEC 60320 C19 Plug: IEC 88 4 Plug ...

  • Cisco Systems SCE8000 - page 58

    4-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Prepar ing for Inst allat ion Figur e 4-1 2 CAB-C19 -CBN DC-Powered Systems Basic guideli nes f or DC -powered sys tems incl ude th e foll owing: • Each cha ssis power s upply sho uld have its own dedic ated inpu t pow ...

  • Cisco Systems SCE8000 - page 59

    4-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Preparing for Installation Site Planning Checklist T able 2 -6 lists the site planning activities that you should pe rform pr ior to installing the C isco SCE8000 chassis. Completing ea ch acti vit y helps ensure a succ ...

  • Cisco Systems SCE8000 - page 60

    4-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Installi ng the Cisc o SCE8000 Chassis in th e Rack Installing the Cisco SCE 8000 Chassis in the Rack This se ction de scribes how to insta ll a Ci sco SCE8 000 pl atform in a r ack. For first-tim e instal latio ns, perf ...

  • Cisco Systems SCE8000 - page 61

    4-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Installing th e Cisco SC E8000 Chassis in th e Rack Note W e recommend that y ou maint ain a mini mum air sp ace of 6 inc hes (15 cm ) between walls an d the chassi s air vents and a m inimu m hor izontal s epar ation o ...

  • Cisco Systems SCE8000 - page 62

    4-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Installi ng the Cisc o SCE8000 Chassis in th e Rack Figur e 4-1 3 Br ack ets on Cisco SCE8000 Chassis Step 2 Position one of the brack ets agains t the chassi s side , an d ali gn the scre w holes. Step 3 Secure th e bra ...

  • Cisco Systems SCE8000 - page 63

    4-15 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Installing th e Cisco SC E8000 Chassis in th e Rack Figur e 4-1 4 Instal ling the Cis co SCE8000 Chassis in the Rack Step 4 Install the ei ght (f our per side) 12-24 x 3/4- inch or 10 -32 x 3 /4-inc h scr e ws t hrough ...

  • Cisco Systems SCE8000 - page 64

    4-16 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Connecti ng the System Ground Step 2 Remov e the m odule f iller plat e cov ering the subslot in th e mounting pa nel by loosening th e two scre ws. Step 3 Carefully in sert the o ptical b ypass mo dule into t he subslot ...

  • Cisco Systems SCE8000 - page 65

    4-17 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 4 Installing the Cis co SCE8000 Chassis Connecti ng th e System Ground Y o u must comple te this proc edure be fore connecti ng system power or turnin g on the Cisc o SCE8000 chass is. Required To ols and Equipme nt T o con nect the syst em ground , you nee d ...

  • Cisco Systems SCE8000 - page 66

    4-18 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 4 Installing the Cisco SCE8000 Chassis Installing the Power Supp lies in the Ci sco SCE800 0 Chassis Figur e 4-1 6 Installing the S y st em Gr ound Step 5 Place t he grou nding wire lug a gainst the g rounding pad, maki ng sur e ther e is so lid m etal-t o-me ...

  • Cisco Systems SCE8000 - page 67

    CH A P T E R 5-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 5 Connecting the Manage ment Interfaces This c hapter explains h ow to conn ect the SCE80 00 Se rvice Control Modul e (SC E8000 -SCM-E) to a local c onsole an d perfor m the i nitial syst em conf igurat ion via t he setup wizard t hat ru ns automa tically ...

  • Cisco Systems SCE8000 - page 68

    5-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 5 Co nnect ing the Manage ment Int erface s Init ial S etup Par ame ters Step 1 Plug the RS-232 serial cable provided wi th th e Cisc o SCE8000 into the CON port on the fr ont panel of the SCE 8000-SC M-E. ( See it em #2 in Figur e 5- 1 below .) Figur e 5-1 Co ...

  • Cisco Systems SCE8000 - page 69

    5-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 5 Connecting the Manage ment Interfac es Initial Setup Parameters – Mini mum leng th — 4 charac ters – Maxim um le ngth — 100 char acter s – Be gin with an alph a charact er – May conta in only printa ble chara cters • The default passw ord for a ...

  • Cisco Systems SCE8000 - page 70

    5-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 5 Co nnect ing the Manage ment Int erface s Connecti ng the Mana gement I nterface Connecting the Man agement Interface The SCE8000 -SCM- E is equipped with one activ e RJ-45 manage ment por t. This por t provides acce ss from a remot e mana gement consol e to ...

  • Cisco Systems SCE8000 - page 71

    5-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 5 Connecting the Manage ment Interfac es Connecting the Manageme nt Interface Step 2 Connect the other en d of the Etherne t cable int o your man agemen t network. Make sure tha t you push on the RJ-45 con nector a ttached to the ca ble until you hea r a cli c ...

  • Cisco Systems SCE8000 - page 72

    5-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 5 Co nnect ing the Manage ment Int erface s Connecti ng the Mana gement I nterface EXAMPLE: The following exam ple d isplays a typ ical ping r esponse wher e t he target IP ad dress is 10.10 .10.2 0. C:>ping 10.10.10.20 pinging 10.10.10.20 ... PING 10.10.1 ...

  • Cisco Systems SCE8000 - page 73

    CH A P T E R 6-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 6 Cabling the Line Ports and Completing the Installation This ch apt er provide s instr uctions for cabling the Ci sco SCE80 00 10 Gigabi t Ether net ports for singl e, casc aded , an d MG SCP t opolog ies . In a cas cad e top ology , this incl udes the c ...

  • Cisco Systems SCE8000 - page 74

    6-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Connecti ng the Lin e Ports to the Net work Single Link: Inline Topology In the inline to pology , the Ci sco SCE800 0 reside s physica lly on th e 10 GB E (T en G igabi t Ethern et) link between t he s ...

  • Cisco Systems SCE8000 - page 75

    6-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Connecting the Line Ports to the Network • Dual link inline top ologies r equire b oth Recei ve and T ran smit f ibe rs. • Dual l ink re ceive-only top ologie s us e only Receive fibers. • T o ma ...

  • Cisco Systems SCE8000 - page 76

    6-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Connecti ng the Lin e Ports to the Net work Multi-Gigabit Service Contr ol Platforms (MGSC P) Topologies In this topology , multipl e Cisco SCE 8 000 p latforms are c onnect ed to a Cisco 7600 Se ries r ...

  • Cisco Systems SCE8000 - page 77

    6-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Connecting the Line Ports to the Network The Firs t Ste p-Ord ering the EC Por ts This section e xplai ns how to order the EC ports and assign them to links. Th is exam ple is the basis for all follo w ...

  • Cisco Systems SCE8000 - page 78

    6-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Connecti ng the Lin e Ports to the Net work • Lin k 1. S=0/ 1, N=2 /2 • Lin k 2. S=0/ 2, N=2 /4 • Lin k 3. S=0/ 3, N=3 /1 • Lin k 4. S=1/ 3, N=3 /2 The standby ports would be assigned to the lin ...

  • Cisco Systems SCE8000 - page 79

    6-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Connecting the Line Ports to the Network • Router 2: N=3/1 , Cisco SCE800 0 #2 3/3/0 • Router 1: S=1 /3, Cisco SCE80 00 #3 3/0/0 • Router 2: S=1 /3, Cisco SCE80 00 #3 3/2/0 • Router 1: N=3/2 , ...

  • Cisco Systems SCE8000 - page 80

    6-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation The Opti cal Bypa ss Modul e • Router 1: S=0 /3, Cisco SCE80 00 #3 3/0/0 • Router 2: S=0 /3, Cisco SCE80 00 #3 3/2/0 • Router 1: N=3/1 , Cisco SCE800 0 #3 3/1/0 • Router 2: N=3/1 , Cisco SCE800 ...

  • Cisco Systems SCE8000 - page 81

    6-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Cabling the 10GBE Line Interface Ports Sing le Lin k Topo logy A single link r equires o nly one bypass modu le. • Subscrib er side netwo rk element <->Po rt A on the bypass module • Cisco SC ...

  • Cisco Systems SCE8000 - page 82

    6-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Cabling the 1 0GBE Li ne Interface Ports Fiber Specifications The fo llowing table pr esents th e fiber specificatio ns. The Ci sco SCE8000 ma y be orde red with either multi-m ode or singl e mode tran ...

  • Cisco Systems SCE8000 - page 83

    6-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Cabling the 10GBE Line Interface Ports Figur e 6-1 Ca bling the 1 0GBE Int erf ace Step 2 V erify that t he link L ED is gr een. If the link LED does not light , try remov ing the network cable plug a ...

  • Cisco Systems SCE8000 - page 84

    6-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Cabling the 1 0GBE Li ne Interface Ports Step 2 Using a ca ble with LC co nnec tors on both ends, plug one end into the appr opriat e port (C or D) on t he external bypass mo dule a nd the o ther e nd ...

  • Cisco Systems SCE8000 - page 85

    6-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Cabling the 10GBE Line Interface Ports Testing Co nnectiv ity: Examining L ink LE Ds and Cou nters If the Cisco SCE8000 p latfo rm ha s been powered up, test n ow to verify that c onnect i vity has be ...

  • Cisco Systems SCE8000 - page 86

    6-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation How to Loa d and Activat e a Service Co ntrol App lication In good multicast packets: 0 In good broadcast packets: 10 In packets discarded: 0 In packets with CRC/Alignment error: 0 In undersized packet ...

  • Cisco Systems SCE8000 - page 87

    6-15 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Casc ade d Syst ems Cascaded Systems • How to Insta ll a Ca scaded System , pag e 6- 15 • CLI Comm ands for C ascaded Sy stems, page 6- 16 How to Insta ll a Cascad ed Sys tem This section outline ...

  • Cisco Systems SCE8000 - page 88

    6-16 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Cascaded System s Step 9 Connect the traff ic port of Cisco SCE8000 platform #2. This will cause a momentary down time until the netwo rk elements from both sides of the Cisco SCE8000 platform auto-ne ...

  • Cisco Systems SCE8000 - page 89

    6-17 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 6 Cabling the Li ne Ports and Co mpleting the Installation Casc ade d Syst ems • inline • physically c onnect ed links • behavior upon failur e of the SCE platf orm • primar y/seco ndary Step 1 From th e Cisco SCE80 00(co nfig if)# prompt, type connec ...

  • Cisco Systems SCE8000 - page 90

    6-18 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 6 Cabling the Line Po rts and Completing the Installation Cascaded System s • Link mode is relev ant only to inl ine topolo gies. • It is rec ommen ded tha t in casc aded topolog ies, both SC E plat forms be c onfigured fo r the sa me link mode, ot herwi ...

  • Cisco Systems SCE8000 - page 91

    CH A P T E R 7-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 7 Basic Cisco SCE8000 Platform Op erations This chap ter describ es how to start up the Cisco SCE80 00 platfor m, reboot , and shutdown. It also describe s how to mana ge configura tions. • Sta rting t he Ci sco SCE8 000 Pla tfor m, p age 7-1 • Managi ...

  • Cisco Systems SCE8000 - page 92

    7-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons Starting the Cisco SCE8000 Pla tform – Direct co nnection to local co nsole (CON port) – Remote m anag ement st ation v ia the L AN (M ng port ) Perfor ming Comp le x Configurations After you have installed ...

  • Cisco Systems SCE8000 - page 93

    7-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s Starting the Cisco SCE8000 Platform Final Tests The proce dure s for perform ing the final tests to verify that th e Cisco SCE8 000 is funct ioning properly are expl ained in th e foll owing sec tio ns: • V eri fy ...

  • Cisco Systems SCE8000 - page 94

    7-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons Starting the Cisco SCE8000 Pla tform Viewing the Ten Gigabit Ethernet Por t Status Step 1 At the Cisco SCE8000 # prompt, type show i nte rface T enGigabi tEther net 3 / baynumber /0 . This disp lays t he port l ...

  • Cisco Systems SCE8000 - page 95

    7-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s Managing Cisco SCE8000 Configu rations Managing Cisco SCE8000 Configurations After you have installed your SCE8000 platf orm hardwa re, che cked all exter nal con necti ons, turn ed on the system power, and allowed ...

  • Cisco Systems SCE8000 - page 96

    7-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons Managin g Cisco SCE800 0 Configurations RDR-formatter destination 10.56.96.26 port 33000 category number 4 priority 100 interface LineCard 0 connection-mode inline on-failure external-bypass no silent no shutdo ...

  • Cisco Systems SCE8000 - page 97

    7-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s Managing Cisco SCE8000 Configu rations Step 2 Check the displayed co nf iguration to m ake sure th at it is se t the way you want. If not, mak e the ch anges you want b efore saving. Step 3 T ype copy running-config ...

  • Cisco Systems SCE8000 - page 98

    7-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons Managin g Cisco SCE800 0 Configurations management-agent property "com.pcube.management.framework.install.activated.version" "3.1.6 build 79" management-agent property "com.pcube.manage ...

  • Cisco Systems SCE8000 - page 99

    7-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s How to Display the SCE Platform Version Information RDR-formatter forwarding-mode multicast RDR-formatter destination 10.56.96.26 port 33000 category number 1 priority 100 RDR-formatter destination 10.56.96.26 port ...

  • Cisco Systems SCE8000 - page 100

    7-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons How to Displa y the SCE Platfo rm Vers ion In format ion SCE> show version System version: Version 3.1.6S Build 279 Build time: Jun 10 2008, 19:27:47 (Change-list 335658) Software version is: Version 3.1.6S ...

  • Cisco Systems SCE8000 - page 101

    7-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s How to Display the SCE Platform Version Information #cpus : 3 cpu-0 SVR : 0x80900121 cpu-0 PVR : 0x80040202 cpu-0 freq : 1500MHz cpu-1 SVR : 0x80900121 cpu-1 PVR : 0x80040202 cpu-1 freq : 1500MHz cpu-2 SVR : 0x8090 ...

  • Cisco Systems SCE8000 - page 102

    7-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons How to Displa y the SCE Platfo rm Inve ntory How to Display the SCE Platform Invent ory Unique De vice Identif ication (UD I) is a Cisco base line feature that is supporte d by a ll Cisco platf orms. This feat ...

  • Cisco Systems SCE8000 - page 103

    7-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s How to Display the SCE Platform Inventory NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2" PID: SPA-1X10GE-L-V2 , VID: V02, SN: JAE115295HH NAME: "SCE8000 FAN 1", DESCR: "FAN-MOD ...

  • Cisco Systems SCE8000 - page 104

    7-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons How to Displa y the SCE Platfo rm Inve ntory NAME: "SCE8000 SPA Interface Processor (SIP) in slot 3", DESCR: "SCE8000-SIP" PID: SCE8000-SIP , VID: V01, SN: CAT1150G07F NAME: "SCE8000 L ...

  • Cisco Systems SCE8000 - page 105

    7-15 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s How to Display the SCE Platform Inventory NAME: "SCE8000 optic 3/3/0", DESCR: "XFP-10GLR-OC192SR " PID: XFP-10GLR-OC192SR , VID: V02, SN: AGA1143N4JN NAME: "SCE8000 traffic processor 1" ...

  • Cisco Systems SCE8000 - page 106

    7-16 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons How to Di spla y th e Sys tem Upti me How to Display the System Uptime Use this command to se e ho w lo ng the system has been running sin ce the last reboot. Step 1 At the SCE> pr ompt, type show syst em-u ...

  • Cisco Systems SCE8000 - page 107

    7-17 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 7 Basic Cisco SCE80 00 Platform O peration s Rebooting and Shutting Down the SCE Platform How to Shu t Down the SC E Platfo rm Shutting do wn the SCE platfor m is required before turning the po wer off. This help s to ensure that non-volatile memo ry devices ...

  • Cisco Systems SCE8000 - page 108

    7-18 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Cha pter 7 Bas ic Ci sco S CE 8000 Platf orm Oper ati ons Rebooting and Shutting D own the SCE Platfo rm ...

  • Cisco Systems SCE8000 - page 109

    CH A P T E R 8-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 8 Troubleshooting Y o ur Cisco SCE8000 platf orm wen t throu gh extensive testing b efore le aving the factor y . Howev er , if you encounter proble ms starting it, use the i nformation in this c hapter to h elp isolate the cause of the problem s. The pro ...

  • Cisco Systems SCE8000 - page 110

    8-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troubles hooting Overv iew . Informatio n Abou t Troubles hooting To ols There are two t ools that w ill help yo u to succe ssfully troubl eshoot your Cisco SCE8000 in stallation: • CLI Comm ands for Troubleshoot ing, pa ge 8 -2 • Checki ...

  • Cisco Systems SCE8000 - page 111

    8-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troublesh ooting Ove rview SCE(config)# boot system ftp://cisco:cisco@10.10.10.10/downloads/SENum.pkg.pkg Verifying package file SENum.pkg.pkg… Package file verified OK. • T roubleshooting the mana gement subsystem: – show interfac e G ...

  • Cisco Systems SCE8000 - page 112

    8-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troubles hooting Overv iew L2 In total octets: 792000 In good unicast packets: 12000 In good multicast packets: 0 In good broadcast packets: 0 In packets discarded: 0 In packets with CRC/Alignment error: 0 In undersized packets: 0 In oversiz ...

  • Cisco Systems SCE8000 - page 113

    8-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troublesh ooting Ove rview Cisco SCE8000 Operational Status The f ollo wing table li sts th e ope rationa l sta tes of the C isco SCE8000 . The Status LED on the Ser vice Control module reflec ts the current Cisco SCE8000 o perational sta tu ...

  • Cisco Systems SCE8000 - page 114

    8-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troubles hooting Overv iew Problem Solvin g Using a Su bsyste ms Approa ch • Identif ying Star tup Proble ms, pag e 8-6 • T roubleshooti ng the Po wer Subsystem, page 8- 7 • T r oubles hooting th e Firmwar e Pa ckage Inst allation , pa ...

  • Cisco Systems SCE8000 - page 115

    8-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troublesh ooting Ove rview • If the Status LED is flas hing orange, in dicat ing a w arning state, che ck the user log: At the prom pt, type: more user l og If any of the fol lowing warning messa ges ap pear , and t he root ca use is not o ...

  • Cisco Systems SCE8000 - page 116

    8-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troubles hooting Overv iew Troubleshooting the Firmw are Package Installation Check the follo wing to help isolate a pro blem in the insta llation of the f irmw are pa ckage. Problems related to the instal lation o f the fir mware p ackage c ...

  • Cisco Systems SCE8000 - page 117

    8-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troublesh ooting Ove rview . T able 8-7 T ro ubleshooting the Manag ement S ubsyst em Symptom Diagnostic Action Possible Cause Possible Solution Mana gement l ink d own: • Mng LINK LED no t lit • CLI comm and sho w interfac e Gigabit Eth ...

  • Cisco Systems SCE8000 - page 118

    8-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troubles hooting Overv iew Troubleshooting the Link Interface Subsystem Check the follo wing to help isolate a p roblem in the li nk interf ace subsy stem. In gene ral, the c ase whe re no tra ff ic is comi ng out of the Cisc o SCE800 0 is ...

  • Cisco Systems SCE8000 - page 119

    8-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troubleshooting with the User Log Troubleshooting with the User Log The us er log is an ASCII f ile that can be v ie wed in an y editor . It co ntains a recor d of system e ven ts, includi ng star tup, shu tdown an d errors . Y ou c an use ...

  • Cisco Systems SCE8000 - page 120

    8-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troub leshooting wi th the User Log • How to Copy the User Log to an E xtern al Source, page 8-1 2 • How to Copy the User Log t o an Inter nal Lo cation, page 8-1 2 • How to V ie w the Us er Lo g, pa ge 8 -12 • How to Clear the Use ...

  • Cisco Systems SCE8000 - page 121

    8-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 8 Troublesh ooting Troubleshooting with the User Log How to View the User Log Counters Ther e ar e two type s of l og c ount ers: • User l og co unters — count the numbe r of sy stem events l ogged from t he SCE platfor m last rebo ot. • Non-v olatile c ...

  • Cisco Systems SCE8000 - page 122

    8-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapter 8 Trouble shooting Troub leshooting wi th the User Log ...

  • Cisco Systems SCE8000 - page 123

    CH A P T E R 9-1 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 9 Removal and Replacement Pro cedures This ch apter d escrib es how to perfo rm removal and rep lacemen t procedur es for Cisco SCE 8000 pl atform fi eld-rep lacea ble un its (FR Us). War ni n g Before you install, operate, or service the sy stem, read th ...

  • Cisco Systems SCE8000 - page 124

    9-2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Prev ent ing El ect ros tat ic Dis cha rge D amage War ni n g Because invisible laser radiation may be emitte d from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not sta ...

  • Cisco Systems SCE8000 - page 125

    9-3 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Suppor ted Hardwa re Supported Hard ware The Cisc o SCE8000 pla tform supp orts the fo llowing hardware: • One Servi ce Co ntrol Module (SCE8 000-SCM -E), w ith an optio nal re dundant Servi ce Cont rol Module ( FRU ). ...

  • Cisco Systems SCE8000 - page 126

    9-4 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing the Power Supply Figur e 9-1 A C Po w er Supply Captiv e Installation Sc r ews Step 5 Grasp both power supply ha ndles, as shown in Figure 9- 2 , and slide t he po wer su pply completel y out of ...

  • Cisco Systems SCE8000 - page 127

    9-5 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Rem ovin g and Repl acin g the Powe r Su pply Installing an AC-Input Power Supply War ni n g This product requires short-circuit (over current) prot ection, to be provided as part of the building installation. Inst all o ...

  • Cisco Systems SCE8000 - page 128

    9-6 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing the Power Supply Step 2 Remo ve the fo ur sc re ws secu ring the te rminal bl ock cov er , a nd s lide t he cov er of f t he t erm inal bloc k. Figur e 9-3 DC-In put Fr ont Pa nel fo r 2700-W DC ...

  • Cisco Systems SCE8000 - page 129

    9-7 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Rem ovin g and Repl acin g the Powe r Su pply Figur e 9-4 Han dling a DC- Input P ower Suppl y Installing a DC-Input Power Supply This secti on covers the DC-inp ut power supply instal latio n procedur e for the Ci sco S ...

  • Cisco Systems SCE8000 - page 130

    9-8 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing the Power Supply Step 2 Remove the plastic bag att ached t o the front panel and put aside. This ba g contai ns two plastic termi nal block barri ers, two cab le ties, an d two cable hol der cov ...

  • Cisco Systems SCE8000 - page 131

    9-9 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Rem ovin g and Repl acin g the Powe r Su pply Step 6 Attach th e appropr iate lug s to the DC-i nput wir es and groun d wire. The wires shoul d be sized ac cordi ng to local and nationa l installat ion requir emen ts. Us ...

  • Cisco Systems SCE8000 - page 132

    9-10 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removi ng and Repla cing the Fa n Asse mbly Figur e 9-6 DC-In put Wir e s on Lef t Side When i nstalling the u nit, the gr ound con necti on must always be made first and d isconne cted last. Step 8 Secure the ground ...

  • Cisco Systems SCE8000 - page 133

    9-11 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removing and Repl acing t he Fan Assembly Removin g the Fa n Asse mbly The fan assem bly is designed to be removed and replace d while th e system is oper ating withou t prese nting a n elec tric al haza rd or d amage t ...

  • Cisco Systems SCE8000 - page 134

    9-12 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Modul es • Listen for the fans; y ou shou ld im media tely he ar the m ope rating. If you do n ot he ar th em, e nsure that the f an assembly is inserte d completel y in the chassis and the f ...

  • Cisco Systems SCE8000 - page 135

    9-13 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removin g and Re placing Modules Handlin g SIPs Each SI P circui t boa rd is m ounted to a metal ca rrier a nd is sensitive to elec trostati c discha rge (ESD) damage. Always handle th e SIP by the carri er edges an d h ...

  • Cisco Systems SCE8000 - page 136

    9-14 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Modul es Note If the capti v e inst allation scr ews are loos e, the EMI gaskets on the in stalled modul es will pus h adjacent module s toward the open slot, re ducing the op ening si ze and m ...

  • Cisco Systems SCE8000 - page 137

    9-15 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removin g and Re placing Modules Step 7 Position the modul e in the slot. (See Figu re 9-1 1 .) Make sur e that you al ign the sides of the module carrier with the slot guides on eac h side of the slot. Figur e 9-1 1 P ...

  • Cisco Systems SCE8000 - page 138

    9-16 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Modul es Step 8 Carefully slide the module into the slot until the EM I gasket alon g the top edge of the module mak es conta ct with the module in the slot ab ove it and both eject or lev ers ...

  • Cisco Systems SCE8000 - page 139

    9-17 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removin g and Re placing Modules Step 10 While pr essing down, simultane ously c lose th e lef t and right ej ector lev ers to fully se at the modu le in the backp lane con nector . The ejecto r le v ers are full y clos ...

  • Cisco Systems SCE8000 - page 140

    9-18 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Modul es Step 1 At t he S CE# p rompt , t ype reload shutdo wn and press Enter to po wer do wn the Ci sco S CE800 0 platfor m before inst alling or removing any module. Step 2 V erify that the ...

  • Cisco Systems SCE8000 - page 141

    9-19 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removin g and Re placing Modules Inserting and R emoving a Module: De tail Refer to the follo wing illustrat ions for detailed vie ws of: • A capti ve scre w • The ej ecto r lever • The sl ot guide Figur e 9-1 4 M ...

  • Cisco Systems SCE8000 - page 142

    9-20 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Modul es Verifying the Installation Use the show versio n comm and to v e rify tha t the system softw are a nd f ir mware are installed proper ly . Step 1 From the SCE> prompt , type show ve ...

  • Cisco Systems SCE8000 - page 143

    9-21 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removin g and Re placing Modules cpld-1-ufm : 0xb803 cpld-2-ufm : 0xb803 summit-0 : 0x1000a summit-1 : 0x1000a fc : 0x1044 ---------------- CFC-1 ---------------- board type : P2 #cpus : 3 cpu-0 SVR : 0x80900121 cpu-0 P ...

  • Cisco Systems SCE8000 - page 144

    9-22 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Shared Po rt Adapters After you verify i nstallat ion of an SCE80 00 module and check c onnect i vity , you must configure t he module . For complete info rmati on on configuring the Cisco SCE8 ...

  • Cisco Systems SCE8000 - page 145

    9-23 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removing and Re placing Share d Port Adapt ers Figur e 9-1 5 Class 1 Laser W ar ning Labels f or SP A P orts War ni n g Class 1 laser product. Statement 1008 War ni n g Invisible laser radiation may be emitted from disc ...

  • Cisco Systems SCE8000 - page 146

    9-24 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing Shared Po rt Adapters SP As ca n be i nserted o r removed inde pendentl y from the SI P . Re moval of a SIP wi th install ed SP As is also su pported . Figure 9-1 7 illustrates h o w to install ...

  • Cisco Systems SCE8000 - page 147

    9-25 Cisco SCE8000 Inst allation and Con figuration Gu ide, Rel 3.1. 7 OL-16478-02 Chapter 9 Rem oval and Repla cement Proce dures Removing and Replacing the Optical Bypass Module Step 3 T o remov e the SP A from the SIP , unfasten the capt i ve inst allation scre ws on the SP A. Step 4 Grasp t he han dles of t he SP A and pull the SP A from th e S ...

  • Cisco Systems SCE8000 - page 148

    9-26 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Chapt er 9 Removal and Repl ace ment Proc edure s Removing and Repla cing the O ptical B ypass Mo dule Replacing the Optical Bypass Module without Disruptin g Traffic on the Link Y o u can replac e a m alfunct ioning SCE 8000 platform wit hout disr upting traffic on ...

  • Cisco Systems SCE8000 - page 149

    A- 1 Cisco SCE8000 Inst allation and Co nfigu ration Guide, Rel 3.1.7 OL-16478-02 APPENDIX A Using Optical Splitters with 10GBE Links • Supported Con figurations, page A -1 • Unsuppor ted Configurati on, page A-2 When designi ng a depl oyment with th e SCE8000 , it is importa nt to keep in mind certain c haracte ristics of the 10GBE link that a ...

  • Cisco Systems SCE8000 - page 150

    A- 2 Cisco SCE8000 Install ation an d Configuratio n Guide, Rel 3. 1.7 OL-16478-02 Appendix A Using Optical Splitters with 10GBE Links Figur e A -2 Support ed SP AN P ort Configur ation Note In the abov e conf iguratio n, it is essential that the SCE 8000 be operat ing in recei v e-only mode. Oth er configurati ons may ca use SP AN po rt traffic to ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems SCE8000 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- SCE8000 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems SCE8000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems SCE8000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems SCE8000, service manual, brief instructions and user manuals Cisco Systems SCE8000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems SCE8000.

Similar manuals

A complete manual for the device Cisco Systems SCE8000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems SCE8000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems SCE8000.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems SCE8000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems SCE8000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems SCE8000, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems SCE8000 - which should help us in our first steps of using Cisco Systems SCE8000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems SCE8000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems SCE8000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems SCE8000?

Use the form below

If you did not solve your problem by using a manual Cisco Systems SCE8000, ask a question using the form below. If a user had a similar problem with Cisco Systems SCE8000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)