English dropdown-ico

Manual Cisco Systems 1600R

16 pages 0.18 mb
Download

Go to site of 16

Summary
  • Cisco Systems 1600R - page 1

    1 Cisco IOS Release 12.2(8)T OSPF Sham-Link Support for MPLS VPN Feature History This document describes how to conf igure and use a sham-link to connect V irtual Priv ate Network (VPN) client sites that run the Open Shortest Path First (OSPF) protocol and share backdoor OSPF links in a Multiprotocol Label Switching (MPLS) VPN conf iguration. This ...

  • Cisco Systems 1600R - page 2

    OSPF Sham-Link Support for MPLS VPN Feature Overview 2 Cisco IOS Release 12.2(8)T Figur e 1 OSPF Connectivity Between VPN Client Sit es and an MPLS VPN Backbone When OSPF is used to connect PE and CE routers, all routing information learned from a VPN site is placed in the VPN routing and forwarding (VRF) instance associated with the incoming inter ...

  • Cisco Systems 1600R - page 3

    OSPF Sham-Link Support for MPLS VPN Feature Overview 3 Cisco IOS Release 12.2(8)T Figur e 2 Backdoor P aths Between OSPF Client Sites For example, Figure 2 shows three client sites, each with backdoor links. Because each site runs OSPF within the same Area 1 configuration, all routing between the three sites follows the intraarea path across the ba ...

  • Cisco Systems 1600R - page 4

    OSPF Sham-Link Support for MPLS VPN Feature Overview 4 Cisco IOS Release 12.2(8)T PE-1# show ip route vrf ospf 10.3.1.7 Routing entry for 10.3.1.7/32 Known via "ospf 100", distance 110, metric 86, type intra area Redistributing via bgp 215 Advertised by bgp 215 Last update from 10.2.1.38 on Serial0/0/0, 00:00:17 ago Routing Descriptor Blo ...

  • Cisco Systems 1600R - page 5

    OSPF Sham-Link Support for MPLS VPN Feature Overview 5 Cisco IOS Release 12.2(8)T Figur e 3 Using a Sham-Link Between PE Rout ers to Connect OSPF Client Sit es Because the sham-link is seen as an intra-area link between PE routers, an OSPF adjacency is created and database exchange (for the particular OSPF process) occurs across the link. The PE ro ...

  • Cisco Systems 1600R - page 6

    OSPF Sham-Link Support for MPLS VPN Feature Overview 6 Cisco IOS Release 12.2(8)T Figur e 4 Sham-Link Example The following example shows the forwarding that occurs between sites from the standpoint of how PE-1 views the 10.3.1.7/32 prefix, the loopback1 interface of the Winchester CE router in Figure 4 . PE-1# show ip bgp vpnv4 all 10.3.1.7 BGP ro ...

  • Cisco Systems 1600R - page 7

    OSPF Sham-Link Support for MPLS VPN Feature Overview 7 Cisco IOS Release 12.2(8)T PE-1# show ip cef vrf ospf 10.3.1.7 10.3.1.7/32, version 73, epoch 0, cached adjacency to POS3/0/0 0 packets, 0 bytes tag information set local tag: VPN-route-head fast tag rewrite with PO3/0/0, point2point, tags imposed: {42 38} via 10.3.1.2, 0 dependencies, recursiv ...

  • Cisco Systems 1600R - page 8

    OSPF Sham-Link Support for MPLS VPN Supported Platforms 8 Cisco IOS Release 12.2(8)T Restrictions When OSPF is used as a protocol between PE and CE routers, the OSPF metric is preserved when routes are advertised o ver the VPN backbone. The metric is used on the remote PE routers to select the correct route. For this reason, you should not modify t ...

  • Cisco Systems 1600R - page 9

    OSPF Sham-Link Support for MPLS VPN Supported Platforms 9 Cisco IOS Release 12.2(8)T • Cisco 1721 • Cisco 1750 • Cisco 1751 • Cisco 2420 • Cisco 2600 • Cisco 2691 • Cisco 3620 • Cisco 3631 • Cisco 3640 • Cisco 3660 • Cico 3725 • Cisco 3745 • Cisco 7100 • Cisco 7200 • Cisco 7500 • Cisco 7700 • URM • Cisco uBR7200 ...

  • Cisco Systems 1600R - page 10

    OSPF Sham-Link Support for MPLS VPN Supported Standards, MIBs, and RFCs 10 Cisco IOS Release 12.2(8)T Supported Standards, MIBs, and RFCs Standards No new or modif ied standards are supported by this feature. MIBs No new or modif ied MIBs are supported by this feature. T o obtain lists of supported MIBs by platform and Cisco IOS release, and to do ...

  • Cisco Systems 1600R - page 11

    OSPF Sham-Link Support for MPLS VPN Configuration Tasks 11 Cisco IOS Release 12.2(8)T T o create a sham-link, use the follo wing commands starting in EXEC mode: Verifying Sham-Link Creation T o verify that the sham-link w as successfully created and is operational, use the show ip ospf sham-links command in EXEC mode: Router1# show ip ospf sham-lin ...

  • Cisco Systems 1600R - page 12

    OSPF Sham-Link Support for MPLS VPN Monitoring and Maintaining a Sham-Link 12 Cisco IOS Release 12.2(8)T Timer intervals configured, Hello 10, Dead 40, Wait 40, Hello due in 00:00:04 Adjacency State FULL (Hello suppressed) Index 2/2, retransmission queue length 4, number of retransmission 0 First 0x63311F3C(205)/0x63311FE4(59) Next 0x63311F3C(205)/ ...

  • Cisco Systems 1600R - page 13

    OSPF Sham-Link Support for MPLS VPN area sham-link cost 13 Cisco IOS Release 12.2(8)T area sham-link cost T o conf igure a sham-link interface on a provider edge (PE) router in a Multiprotocol Label Switching (MPLS) V irtual Priv ate Network (VPN) backbone, use the ar ea sham-link cost command in global conf iguration mode. T o remove the sham-link ...

  • Cisco Systems 1600R - page 14

    OSPF Sham-Link Support for MPLS VPN area sham-link cost 14 Cisco IOS Release 12.2(8)T Examples The following e xample sho ws ho w to conf igure a sham-link between tw o PE routers in an MPLS VPN backbone by using the area sham-link cost command on each router: Router1(config)# interface loopback 55 Router1(config-if)# ip vrf forwarding v1 Router1(c ...

  • Cisco Systems 1600R - page 15

    OSPF Sham-Link Support for MPLS VPN show ip ospf sham-links 15 Cisco IOS Release 12.2(8)T show ip ospf sham-links T o display information about all sham-links conf igured for a provider edge (PE) router in the V irtual Priv ate Netw ork (VPN) backbone, use the show ip ospf sham-links command in EXEC mode. show ip ospf sham-links Syntax Description ...

  • Cisco Systems 1600R - page 16

    OSPF Sham-Link Support for MPLS VPN Glossary 16 Cisco IOS Release 12.2(8)T Glossary BGP —Border Gate way Protocol. Interdomain routing protocol that exchanges reachability information with other BGP systems. It is def ined in RFC 1163. CE router —customer edge router . A router that is part of a customer network and that interfaces to a provide ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems 1600R can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 1600R manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 1600R
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 1600R.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 1600R, service manual, brief instructions and user manuals Cisco Systems 1600R. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 1600R.

Similar manuals

A complete manual for the device Cisco Systems 1600R, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 1600R by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 1600R.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 1600R - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 1600R, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 1600R, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 1600R - which should help us in our first steps of using Cisco Systems 1600R
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 1600R
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 1600R in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 1600R?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 1600R, ask a question using the form below. If a user had a similar problem with Cisco Systems 1600R it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)