Manual Cisco Systems DGS-1224T

59 pages 0.87 mb
Download

Go to site of 59

Summary
  • Cisco Systems DGS-1224T - page 1

    D-Link DGS-1224T 24-Port 10/100/1000Mbps Gigabit Ethernet Switch + 2-Port mini GBIC Web-Smart Switch User’s Guide First Edition Building Netw orks f or Peopl e ...

  • Cisco Systems DGS-1224T - page 2

    i TABLE OF CONTENTS About This Guide................................................................................. 1 Purpose ............................................................................................ 1 Terms/Usage .................................................................................... 1 Introduction................ ...

  • Cisco Systems DGS-1224T - page 3

    ii Installing the Smar tConsole Utility................................................ 17 SmartConsole Utility Features ....................................................... 18 Menu Toolbar............................................................................. 18 Discovery List .............................................................. ...

  • Cisco Systems DGS-1224T - page 4

    iii Security > Mac Address Table > Sta tic MAC............................ 52 Security > Mac Address Table > Dynam ic Forwarding Table .. 53 Monitoring > Statistics ............................................................... 54 ...

  • Cisco Systems DGS-1224T - page 5

    1 ABOUT THIS GUIDE Congratulations on your purchase of the DGS-1224T 24 -Port 10/100/10 00Mbps Gi gabit Ether net + 2-Por t Mini GB IC Web-Smart Switch. This device integrates 100 0Mbps Gigabit Et hernet, 100Mbp s Fast Ethernet and 10 Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide disc usses how to install and u ...

  • Cisco Systems DGS-1224T - page 6

    2 INTRODUCTION This chapter descr ibes the featur es of the DGS-1224T an d provides some background information abou t Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, form at, and sup port for C SMA/CD pr otocol, fu ...

  • Cisco Systems DGS-1224T - page 7

    3 In addition, the phenomenal bandwid th delivered by Gigabit Ethernet is the most cost-e ffective m ethod to tak e advantage of to day and tomorrow’s rapidly improvin g switchin g and rout ing inter networking technologies. And with expected advan ces in the co ming ye ars in silicon technolog y and digital signal processing that will enable Gig ...

  • Cisco Systems DGS-1224T - page 8

    4 Switching Technology Another a pproach to p ushing beyo nd the lim its of Ethe rnet technology is the develo pment of swi tching technol ogy. A switc h bridges Ethernet packets at the MAC address level of the Et hernet protoc ol transmitting a mong connec ted Ethernet or Fast Ethernet L AN segments. Switching is a cost-effective way of increasing ...

  • Cisco Systems DGS-1224T - page 9

    5 so broadcast and multicast traffic use val uable network ban dwidth more efficiently. Additional VLAN benefits include: Security: Security is increased with the redu ction of opportunity in eavesdropping on a broadcast n etwork because data will be switched to only those confid en tial users within the VLAN. Cost Reduc tion: VLANs can be used to ...

  • Cisco Systems DGS-1224T - page 10

    6 ♦ Supports Static MAC setting ♦ D-Link Safeguard Engine supp ort ♦ Supports Simple Netw ork Managem ent Protocol (SNMP) ♦ MIB support for: RFC121 3 MIB I I, Private MIB ♦ Supports DHCP client ♦ Supports Port -sett ing for Spe ed and Flow c ontrol ♦ Easy configurat i on via Web Browser   ♦ Easy setting via Web Management Utility ...

  • Cisco Systems DGS-1224T - page 11

    7 Flas h Memo ry Prom 2M By tes Port Functions LAN - 24 x 10/100/1000BaseT ports - Compliant with the following standards: IEEE 802.3 compliance 1. IEEE 802.3u compliance 2. IEEE 802.3ab compliance 3. Supports Full-Duplex operations at 10/100Mbps, and 1000Mbps only on SFP ports 4. IEEE 802.3x Flow Control support for Full-Duplex mode Combo ports in ...

  • Cisco Systems DGS-1224T - page 12

    8 Reset button on the back panel A factory reset button x 1 Physical & Environment AC input 100-240 VAC, 50 /60 Hz Internal uni versal power s upply Operation Temperature 0-40°C Storage Temperature -10-70°C Humidity Operation: 10%-90% R H Storage: 5% ~ 90% RH Power consumption 35.1(watts) Heat Dissipation 119.69 (bt u/ hr ) MTBF 155456 (hou r ...

  • Cisco Systems DGS-1224T - page 13

    9 UNPACKING AND INSTALLATIO N This chapter provides unpack ing and installation in formation for the Web-Smart Switch. Unpacking Carefully un pack the conte nts of the We b-Smart Switch packagi ng and locate the following items: One DGS-1224T Web- Smart Switch One AC power cord, su itable for th e local electrical power voltage requirements Four ru ...

  • Cisco Systems DGS-1224T - page 14

    10 • Ins tall the Sw itch in a si te free from strong electromagneti c field generat ors (such as m otors), vib ration, dust, a nd direct exposure to sunligh t. • Leave at least 10cm of spa ce to the front and re ar of the Switch for ventilation. • Install the Switch on a sturdy , level surface that can support its weight, or in an E IA stand ...

  • Cisco Systems DGS-1224T - page 15

    11 Figure 2 – Attach the mounting br ackets to the Sw itch Use the screws pr ovided with t he equipment rack o r chassis to mount the Switch in the rack. Figure 3 – Mount the Switch in the rack or chassis Connecting Network Ca ble The Switch suppo rts 1000Mbps Giga bit Ethernet that can operate in Auto-negot iate mode, an d 10Mbps Ethe rnet or ...

  • Cisco Systems DGS-1224T - page 16

    12 AC Power The Switch utilizes an AC power supply of 100-240V AC, 50-6 0 Hz. The power switch is located at the rear of the Switch adjacent to the AC power connector and the system fan . The switch’s power supp ly will adjust to the local power source automatically and may be turned on without ha ving any or all LAN segm ent cables connect ed. ...

  • Cisco Systems DGS-1224T - page 17

    13 IDENTIFYING EXTERNAL COMP ONENTS This chapter describes the front pa nel, rear pa nel, and LED i ndicators of the Switch. Front Panel The figure below shows the front panel of the Switch. Figure 4 – Front panel of the 24-port Web-Smart Switch LED Indicator: Comprehensiv e LED indicat ors display t he status of the switch a nd the network (see ...

  • Cisco Systems DGS-1224T - page 18

    14 Rear Panel Figure 5 – Rear panel of the Switch Reset button: The Reset button resets all configuration settings back to the factory default. Note: Be sure that to reco rd all custom settings of the Switch before pressing the reset button . Resetting the Switch back to factory default settings will erase all custom configurations. AC Power Conn ...

  • Cisco Systems DGS-1224T - page 19

    15 UNDERSTANDING LED INDI CATORS The front pa nel’s LED Indi cators provide i nstant status feedbac k, which help m onitoring and troubl eshooting LAN issues if needed. Figure 6 – LED indicators of the Switch Power and System LEDs Location LED Indicative Color Status Description Solid Light Power is On Power Green Light off Power is Off Blinkin ...

  • Cisco Systems DGS-1224T - page 20

    16 Blinking When there is reception or transmission (or Activity) of data in any port Light off No link detected Green Solid Light When there is a secure connection (or link) to 1000Mbps device in a port Amber Solid Light When there is a secure connection (or link) to 100Mbps device in any of the ports Speed Off Light off Possible link at 10M or no ...

  • Cisco Systems DGS-1224T - page 21

    17 CONFIGURATION Through a web brow ser, the features and func tions of the DGS-1224T Switch can be config ure d for optimum use. Supported web browsers The embedded Web-based Utility currently suppo rts the following web browser s : • Microsoft Int e r net Expl orer ver. 6. 0, 5.5 • Mozilla ver. 1.7.12, 1.6 • Firefox ver. 1.5, 1.0. 7 • Net ...

  • Cisco Systems DGS-1224T - page 22

    18 SmartConsole Utility Features The SmartConsole Utility is divided into four parts, a Menu Toolbar of functi ons at the to p, Discovery List , Monitor List , and Device Setting . Figure 7 – SmartConsole Utility Menu Toolbar The Menu Toolbar in the SmartConsole Utility has four main tabs, File, View, Option, and Help. File includes: Monitor s av ...

  • Cisco Systems DGS-1224T - page 23

    19 • Exit: To exit the SmartConsole Utility. View includes: View log and Clear Log functions, wh ich provide trap setting list operations. • View Log: To show the event of the SmartConsole Utility and the device. • Clear Log: To clear all log entries. Option includes: Refresh Time and Grou p Timer functions. • Refresh time refreshes t he mo ...

  • Cisco Systems DGS-1224T - page 24

    20 Help includes: information Abou t the SmartConsole Utility, such as the software ve rsion. Discovery List This is the list where all Web- Smart devices on t he networ k are discovered. By pressing the Disc overy button, all the Web-Smart devices are listed in the discov ery list. Double click or press the Add to monitor list button to select a d ...

  • Cisco Systems DGS-1224T - page 25

    21 Definitions of the Monitor List functi ons and terms: S: Shows the sy stem sym bol of the Web-Sm art device, represents the device system is inactive. IP Address: Shows the cu rrent IP ad dress of th e device . MAC Address: Shows the device MAC Address. Protocol versi on: Shows the version of the Utility protocol. Product Name: Shows the device ...

  • Cisco Systems DGS-1224T - page 26

    22 The symbol “ ” represents a new trap signal, and will disappear after the event record is reviewed (clicked). Figure 9 – Trap information Note: To receive T rap information, the switch m ust be configured with Trap IP and Trap Events, ava ilabl e from the Trap Setting m enu. Add Item: Adds a devi ce to the Monit or List manuall y, by enter ...

  • Cisco Systems DGS-1224T - page 27

    23 Figure 10 – Configuration Setting Password Chan ge: To change the pa ssword, fill in the new and original passwor d, and pre ss “Set” . Figure 11 – Password Change This space has been intenti onally reserved for notes: ...

  • Cisco Systems DGS-1224T - page 28

    24 Firmware Upgrade: When the device firmware is be upgraded, enter the Firmware path and pass wo rd (if necessary) to update. Figure 12 – Firmware Upgrade Web Access: Double click the device in the Monitor List or select a device in the Monitor List and press t he “Web Access” button to ope n the Web-based Utility. To see the list of web bro ...

  • Cisco Systems DGS-1224T - page 29

    25 Web-based Utility The DGS-1224T Web-Smart Switch has a web br owser GUI interface for configuri ng the Swit ch through a web browser. To see the list of web browsers the Web-based Utility supports, see Supported we b browsers on page 20. A network administrato r can manage, control and monitor the Switch from a PC on the lo cal LAN. This section ...

  • Cisco Systems DGS-1224T - page 30

    26 When the following dialog appears, (the actual IP a ddress will correspond with the IP address of the Switch), enter the defau lt password "admin" and press OK to enter the main Web-based Utility. Figure 15 – Log in screen After entering the password, the main page of the Web-based Utility displays the status of the Swit ch. In the t ...

  • Cisco Systems DGS-1224T - page 31

    27 Tool Menu The Tool Menu offers glo bal function cont rols such as Reset, Configuri ng Backup and Res toration, Firm ware Backup and Upload, and System Reboot. Figure 17 – Tool Menu Reset: Provides a safe reset option for the Switch. Figure 18 – Tool Menu > Reset Configure Backup and Restore : Allows the current configuratio n settings to ...

  • Cisco Systems DGS-1224T - page 32

    28 Figure 19 – Tool Menu > Configure Backup and Restore Firmware Backup and Upload: Allows for the firmware to be saved , or for an existing firmware file to be uploaded to the Switch. Figure 20 – Tool Menu > Firmware Backup and Upload ...

  • Cisco Systems DGS-1224T - page 33

    29 System Reboot: Provides a safe way to reboot the system . Figure 21 – Tool Menu > System Reboot Setup Menu When the Web-based Utility appears, a Setup Menu o n t h e l e ft s i d e o f the screen provide s an organizati on of links to pages for spec ific feature and fu nction configurat ions and properties. The following sections describe i ...

  • Cisco Systems DGS-1224T - page 34

    30 System > System Setting The System Setting includes IP Information and System information. By default DHCP is disabled. If DHCP is disabled, t he IP Address , Subnet Mask and Gateway can be ma nually configured. By entering a System Name and System Lo cation , the device can more easily be recognized through the SmartConsole Utility and in ot ...

  • Cisco Systems DGS-1224T - page 35

    31 Enabled , enter the Destinati on IP address of the m anaging PC that will receive trap information. Figure 24 – System > Trap Setting System Event: Monit ors the sy stem’s trappi ng inform ation. Device Bootup : Traps syste m boot-up inf ormation. Illegal Lo gin: Traps e vents of incorrect pass word logins, recording the IP of the origi n ...

  • Cisco Systems DGS-1224T - page 36

    32 System > Port Setting In the Port Set ting page, the status of all ports can be monitored a nd adjusted for optimu m configuration. By selecting a range of ports ( From Port and To Por t ), the Speed and Flow Control ca n be set f or all such ports, by clicki ng Apply . To refresh the information table to view the latest Link Status and Prior ...

  • Cisco Systems DGS-1224T - page 37

    33 Flow Control: This setting determines if the Switch handles flow control. Set to Enable to avoid data transfer overflows. Default setting for all ports is Disable . Link Status: Reporting Down indicates the port is disconnected. Priority: Displays each port’s 802.1P Qo S priority level for received data packet ha ndling. De fault setti ng for ...

  • Cisco Systems DGS-1224T - page 38

    34 string. SNMP packets fr om a station that are not aut henticated are ignored (dropped ). Figure 26 – System > SNMP Setting Enabled / Disabled: Default setting is Disabled . Click Enable, then Apply, to set Community Settings. The default c ommuni ty strings fo r the Switc h used for S NMP v.1 management access are: Public: The community wit ...

  • Cisco Systems DGS-1224T - page 39

    35 events such as a port status change. The Switch ca n generate traps and send them to the trap recipien t (i.e. network a dministrator). Setting up a T rap: Select Enable , enter a Trap Name (i.e. Trap Nam e must be selected from a Communit y Name), add t he IP of the devi ce to be monitored, and choo se the event(s) to trap. The available trap E ...

  • Cisco Systems DGS-1224T - page 40

    36 Configuration > Jumbo Frame By default, the Jumbo Frame function is set to Disabled . Enabling this function will allow the Switch t o receive packets sizes of up to 10,240 bytes. Figure 28 – Configuration > Jumbo Frame Configuration > 802.1Q VLAN The IEEE 802.1Q VLAN Configuration page prov ides powerful VID manageme nt functions. By ...

  • Cisco Systems DGS-1224T - page 41

    37 Figure 29 – Configuration > 802.1Q VLAN > Default Setting Figure 30 – Configuration > 802.1Q VLAN > Add VID ...

  • Cisco Systems DGS-1224T - page 42

    38 Figure 31 – Configuration > 802.1Q VLAN > Example VIDs Figure 32 – Configuration > 802.1Q VLAN > VID Assignments ...

  • Cisco Systems DGS-1224T - page 43

    39 Configuration > Trunking The Trunki ng function e nables the casca ding of tw o or more ports for a combined lar ger bandwidt h. Up to six Tru nk groups ma y be created, each supporting up to 8 ports. Add a Trunking Name a nd select the ports to be trunke d together, and click Apply to activate the selected Trunking groups. Figure 33 – Conf ...

  • Cisco Systems DGS-1224T - page 44

    40 header. IGMP snooping ca n help re du ce cluttered traffic on the LAN. With IGMP s nooping ena bled glob ally, the Web-Smart Switch will forward IP multicast traffic only to connections th at have group members attached. Figure 34 – Configuration > IGMP Snooping Configuration By default, IGMP is Disabled . If Enabled , the IGMP Global Setti ...

  • Cisco Systems DGS-1224T - page 45

    41 for controlling the frequen cy of IGMP traffic on a subnet. Default is 10 seconds. Robustness Variable (1-255 sec): The Robustness Variable allows adjustment for the e xpect ed packet loss on a subn et. If a subnet is expected to be lossy, the Robu stne ss Va riable may be increased. The Robustness Variabl e can not be set zero, and SHOULD NOT b ...

  • Cisco Systems DGS-1224T - page 46

    42 a group is received, a group-specific query is sent to the po rt on which the leave message is received. A timer is started wit h a time interval equal to IgsLeaveProcessInterval. If a report message is receive d before above timer expires, the Leave m essage is dropped. Otherwise the Leave message is either forwarded to the port. Default is 1 s ...

  • Cisco Systems DGS-1224T - page 47

    43 To view the Multicast Entry Table for a given VLAN, press the View button. Figure 36 – Configuration > IGMP Multicast Ent r y Table ...

  • Cisco Systems DGS-1224T - page 48

    44 Configuration > 802.1D Spanning Tree 802.1D Spa nning Tree P rotocol ( STP) impl ementation is designed t o prevent net work loops t hat could ca use a broadcast storm. Whe n physical links forming a loop prov ide redundancy, only a sing le path will be forwarding frames. If the link fails, STP activates a redundant link automatically. Figure ...

  • Cisco Systems DGS-1224T - page 49

    45 Bridge Priority: This value between 0 and 65535 s pecifies the priority for forwarding packets: the lower the value, the higher th e priority. The default is 32768. Bridge Max Age: This va lue may be set to ensure th at old informati on does not endless ly circulate throu gh redundant pat hs in the network, preventing th e effe ctive propagation ...

  • Cisco Systems DGS-1224T - page 50

    46 Path Priority: Select a value between 0 and 255 to specify the priority for a specified p ort for forwardi ng packets: the lower the value, the higher the priority. The default is 128. Configuration > Port Mirroring Port Mirro ring is a m ethod of m onitoring net work traffic t hat forwards a copy of each i ncoming and/or outgoing pa cket fro ...

  • Cisco Systems DGS-1224T - page 51

    47 RX (receive) mode: Duplicates the data that se nd to the source and forwards it to the Ta rget Port. Both (trans mit and receive) mode: Duplicate both the data transmitted from and data send to th e so urce port, an d forwards all th e data to the assigne d Target Port . None: Turns off the mi rrori ng of the port. QoS > 802.1p Default Priori ...

  • Cisco Systems DGS-1224T - page 52

    48 flooding int o the switch's C PU. This functi on helps prot ect the Web- Smart Swit ch from bei ng interrupt ed by m alicious vir uses or worm attacks. Figure 40 – Security > Safeguard Engine Security > Broadcast Storm Control The Broadcast Storm Control (BSC) feature provides the ability to control the rece ive rate of broadcasted ...

  • Cisco Systems DGS-1224T - page 53

    49 Figure 41 – Security > Broadcast Storm Control Security > 802.1X Setting IEEE-802.1X prov ides a security st andard for net work access control, predominantly in W i-Fi wireless networks. 802.1X holds a network port disconnected u ntil authentication is completed. Depending o n the results, the port is either made available to the u ser, ...

  • Cisco Systems DGS-1224T - page 54

    50 Figure 42 – QoS > 802.1X Setting By default, 802.1X is Disabled . To use EAP for security, select Enabled and set the 802.1X Global Setti ngs for the Radius Server and applicable authentication i nformation. Authentication Port: sets primary port for security monitoring. Default is 1812. Key: Masked passwo rd matchin g the Radius Ser ver Ke ...

  • Cisco Systems DGS-1224T - page 55

    51 QuietPeriod: Sets the number of seconds that the switch remains in the quiet state following a failed au thentication exchange with the client. Default 80 seconds SuppTimeout: Sets the switch-to-client retransmission time for the EAP-request frame. Default is 12 seconds. ServerTimeout: Sets the am ount of time the switch waits for a response fro ...

  • Cisco Systems DGS-1224T - page 56

    52 Security > Mac Address Table > Static MAC This page provides two distinct f eatures. The top table provides the ability to turn off auto learning Mac add ress if a port isn 't connected to an uplink Switch (i.e. DHCP Server). By default, this feature is OFF (disabled). Figure 43 – Security > Static Mac Address To initiate the rem ...

  • Cisco Systems DGS-1224T - page 57

    53 Security > Mac Address Table > Dynami c Forwarding Table For each port, this table displays the Mac address of e ach packet passing through th e Switch. To add a Mac address to the Static Mac Address List, click the Add chec kbox associated with the identified packet. Figure 44 – Security > Dynamic Forwarding Table ...

  • Cisco Systems DGS-1224T - page 58

    54 Monitoring > Statistics The Statistics screen displays the stat us of each port packet count. Figure 45 – Monitoring > Statistics Refresh: To renew the details collected and displayed. Clear Counter: To reset the details displayed. TxOK: Number of packets tr ansmitted succ essfully. RxOK: Number of pac kets received succes s fully. TxErr ...

  • Cisco Systems DGS-1224T - page 59

    55 Figure 46 – Monitoring > Port Statistics ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems DGS-1224T can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- DGS-1224T manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems DGS-1224T
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems DGS-1224T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems DGS-1224T, service manual, brief instructions and user manuals Cisco Systems DGS-1224T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems DGS-1224T.

A complete manual for the device Cisco Systems DGS-1224T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems DGS-1224T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems DGS-1224T.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems DGS-1224T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems DGS-1224T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems DGS-1224T, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems DGS-1224T - which should help us in our first steps of using Cisco Systems DGS-1224T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems DGS-1224T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems DGS-1224T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems DGS-1224T?

Use the form below

If you did not solve your problem by using a manual Cisco Systems DGS-1224T, ask a question using the form below. If a user had a similar problem with Cisco Systems DGS-1224T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)