Manual Barco DOC-3200-2

56 pages 2.11 mb
Download

Go to site of 56

Summary
  • Barco DOC-3200-2 - page 1

    DOC-3200-2 User's Manual ...

  • Barco DOC-3200-2 - page 2

    DOC-3200-2, Current Version Title: H ERMES DXD – User’s Manual ID-no.: DOC-3200-2 Date: 2003-09 main issue update chapter 1 new chapter 2 new chapter 3 new chapter 4 new chapter 5 new chapter 6 new chapter 7 new new: The corresponding chapters are new or completely revised. corr.: Passages of the corresponding chapter were corrected; see modifi ...

  • Barco DOC-3200-2 - page 3

    Trademarks Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers. Copyright © 1999 - 2003 by Barco Cont ...

  • Barco DOC-3200-2 - page 4

    Revision sheet To:  Barco Control Rooms GmbH An der Rossweid 5, D-76229 Karlsruhe Phone: +49-721-6201-0, Fax: +49-721-6201-298 E-mail: docu.de.bcd@barco.com Web: www.barcocontrolrooms.de  BarcoProjection Noordlaan5, B-8520 Kuurne, Belgium Phone: (32) (56) 36-8211, Fax: (32) (56) 36-8251 E-mail: sales.bcd@barco.com , Web: www.barcocontrolrooms ...

  • Barco DOC-3200-2 - page 5

    Table of Contents 1 Preliminary Remarks.......................................................................................................... .......... 1-1 1.1 How this manual is organized ............................................................................................. 1- 2 1.2 Styles and Symbols .................................. ...

  • Barco DOC-3200-2 - page 6

    5 Controlling Hermes DXD ....................................................................................................... ..... 5-1 5.1 Valid Commands for Hermes DXD .................................................................................... 5-2 5.2 Request commands ................................................................... ...

  • Barco DOC-3200-2 - page 7

    1 Prelim i n a ry Remarks This User’s Manual describes design, function and operation of H ERMES DXD of Barco. H ERMES DXD is a multiplexer to connect each of two digital projection units alternatively to two graphical controllers. Barco's product range of digital projection units comprises projection mod- ules of the O VER V IEW D series an ...

  • Barco DOC-3200-2 - page 8

    1.1 How th i s ma nual is organized This manual is divided into seven chapters: Preliminary Remarks explains the structure of the manual itself and the used typographic styles and symbols. Safety in- formation is provided concerning the operation of systems from Barco. Summary provides a summary of the system components and characteristics. First s ...

  • Barco DOC-3200-2 - page 9

    1.2 Styles a n d Symbols The typographic styles and the symbols used in this document have the following meaning: Arial bold Labels, menus and buttons are printed in the Arial bold font. Condensed Links to both other chapters of this manual and to sites in the Internet are printed condensed . In the on-line version of this manual all hyperlinks app ...

  • Barco DOC-3200-2 - page 10

    1.3 Safety I n for mation This section describes safety precautions which must be observed when installing a product from BARCO. H ERMES DXD is built in accordance with the requirements of the international safety standard IEC950, UL1950 and CSA C22.2 No. 950, which are the safety standards of information technol- ogy equipment including electrical ...

  • Barco DOC-3200-2 - page 11

     Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.  To disconnect the cord, pull it out by the plug. Never pull the cord itself.  If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord does ...

  • Barco DOC-3200-2 - page 12

    On Servicing Do not attempt to service this device yourself, as opening or removing covers may expose you to dangerous voltage potential and risk of electric shock! Refer all service to a qualified BARCO service center. Adjust only those controls that are covered by the operating instructions since improper adjust- ment of the other controls may re ...

  • Barco DOC-3200-2 - page 13

    2 Summ a r y This chapter gives an overview of the H ERMES DXD. ...

  • Barco DOC-3200-2 - page 14

    2.1 Conne c t i ng the graphical controller and the projection cubes H ERMES DXD is equipped with two digital input connectors ( Digital In 1, Digital In 2 ) and two digital output connectors ( Digital Out 1, Digital Out 2 ). The output connectors can be routed to any input connector, resulting in the following fields of applications: Hermes DXD as ...

  • Barco DOC-3200-2 - page 15

    2.2 Assign i n g i nputs to outputs H ERMES DXD is operated by means of remote control, and the inputs are routed to the output via the respective command, cf. 5.3 Switching commands . The following schematics show the multiple possibilities for assigning an input to an output. For a clear arrangement, the connections which can be established in pa ...

  • Barco DOC-3200-2 - page 16

    3 Gettin g s tarted This chapter describes the control elements and interfaces of H ERMES DXD as well as the cabling. ...

  • Barco DOC-3200-2 - page 17

    3.1 Examin i n g Figure 3-1 Hermes DXD 3.1.1 The Fro n t Pa nel The front panel of your H ERMES DXD looks like this or similar: 1 POWER DIGITAL OUT 2 DIGITAL OUT 1 DIGITAL IN 2 DIGITAL IN 1 REMOTE OUT REMOTE IN 23 4 56 7 8 9 1 0 1 1 Figure 3-2 Front Panel of Hermes DXD 1 REMOTE IN 2 REMOTE OUT 3 LED: DIGITAL IN 1 4 DIGITAL IN 1 5 LED: DIGITAL IN 2 ...

  • Barco DOC-3200-2 - page 18

    LEDs allocated to the inputs: If they are off, there is no signal present. If there is a sync signal present, the LED is on: Green stands for (signal present on) input (channel) 1 Orange stands for (signal present on) input (channel) 2 LEDs allocated to the outputs: The color of the LED indicates which input (channel) is displayed: In case it is gr ...

  • Barco DOC-3200-2 - page 19

    3.1.2 The Bac k Panel The back panel of your H ERMES DXD looks like this or similar: A BC A Main Switch B AC In C AC Out Figure 3-3 The Main Switch [A] is for switching H ERMES DXD on and off. If the 0 is visible on top of the switch, the device is switched off, and it can be switched on by pressing the switch. The AC In socket [B] is for connectin ...

  • Barco DOC-3200-2 - page 20

    3.2 Native d e v ice settings (default settings) Hermes DXD has auto switch capabilities: in case there is no signal present at the input routed to an output, the output may switch automatically to the other input. Per default, this auto switch functionality is enabled. If desired, it can be deactivated, cf. Enabling/Disabling auto switch Having tw ...

  • Barco DOC-3200-2 - page 21

    3.4 Cabling This block diagram gives an overview about the cabling of H ERMES DXD Figure 3-4 cabling Hermes DXD The cabling must be done before switching on H ERMES DXD or any other system components! Signal cables are available in different types (fibre or copper), different interfaces (PanelLink-to-DVI, DVI-to-PanelLink, DVI-to-DVI) and different ...

  • Barco DOC-3200-2 - page 22

    3.4.2 Digital I n p ut and Output H ERMES DXD has DVI interfaces. Depending on the type of graphical card and/or the type of projection module, the following kind of cables are required: DVI-to-DVI, DVI-to-PanelLink, PanelLink-to-DVI. The DVI-DVI cable is available as copper cable (length up to 10m) and fibre cable (length up to 100m). The DVI-to-P ...

  • Barco DOC-3200-2 - page 23

    3.5 Operat i n g Hermes DXD After the cabling is done, you can switch on your system. In order to provide the graphic cards with the correct timing, it is mandatory that H ERMES DXD is switched on before booting the controller! The projection engines can be switched on or off: the timing information is received via the data cable as soon as the con ...

  • Barco DOC-3200-2 - page 24

    4 Remo t e Control The remote control is a system for scanning and controlling single devices of Barco Display Wall. As a certain class of devices H ERMES DXD can be scanned from a central computer. By means of remote control the respective input can be switched to a desired output. This chapter describes the basics of remote control as cabling, pr ...

  • Barco DOC-3200-2 - page 25

    4.1 Cabling A remote control system consists of three different components:  remote control master ( RCM )  remote control slave ( RCS )  remote control connection The RCM is the central computer which controls the slave devices RCS . All control messages are gener- ated by the RCM , addressed to a certain RCS device and sent on. Incorrect ...

  • Barco DOC-3200-2 - page 26

    4.1.2 Cabling o f Hermes DXD (number of devices > 20) If there are more than 20 devices a distribution panel has to be used. Then the cabling looks like this: Figure 4-3 remote control cabling by use of a distriubtion panel Remote control cabling is available in various length and with adapters for connecting to different de- vices. See section ...

  • Barco DOC-3200-2 - page 27

    4.2.3 Structu r e of Messages The messages consists out of a RCS -independent and a RCS -dependent layer. The RCS -independent parts are interpreted the same by all types of devices. The RCS -dependent parts contain specific com- mands for a certain type of RCM : the message body. A message has the following structure: <STX> <TYPE> < ...

  • Barco DOC-3200-2 - page 28

    4.2.5 Types o f RCS Classes e O VER V IEW - M L r MULTI M EDIA -T ERMINAL M MT-X, M MT-NT, E OS s MULTI M EDIA -T ERMINAL M MT-S m AVC-B OX , D IGITAL S WITCHBOX , A NALOG I NPUT B OX , H ERMES D2D, H ERMES V2A, H ERMES DXD, H ERMES VXA Table 4-4 4.3 How to c a lculate the checksum The checksum is being evaluated from the recipient to make sure tha ...

  • Barco DOC-3200-2 - page 29

    4.4 The sta t u s register The status register stores information about which input is provided with a signal, which input is switched to which output, and if autoswitch modus is enabled or disabled. The following lists the bits of the Status Register, the M ost S ignificant B it is the most left bit, the L east S ignificant B it is the most right ...

  • Barco DOC-3200-2 - page 30

    5 Contr o l l in g Hermes DXD This chapter describes the commands to control H ERMES DXD, the commands and the an- swers/acknowledge. ...

  • Barco DOC-3200-2 - page 31

    5.1 Valid C o m m ands for Hermes DXD command description t selects input from first graphical controller as signal for Digital Out 1 a selects input from second graphical controller as signal for Digital Out 1 s selects input from first graphical controller as signal for Digital Out 2 b selects input from second graphical controller as signal for ...

  • Barco DOC-3200-2 - page 32

    5.2 Reques t com mands Request commands can be sent from the RCS to the RCM or vice versa. The answer of a request com- mand does not include the status information. Command "R": Calling for Address Description: Request for an address. A RCS that is not provided with an address will send requests for an address at regular intervals. This ...

  • Barco DOC-3200-2 - page 33

    Command "I": Calling for Information Description: This request is about the identity number of the device and the version of the firmware. Example: The message sent from the RCM to the RCS1 about the identity number is: Message <STX> <TYPE> <ADDRH> <ADDRL> <Body> <STATH> <STATL <CHKH> <CHKL& ...

  • Barco DOC-3200-2 - page 34

    Command "a": interconnection digital input 2 to digital output 1 Description: Via the command a the RCM tells the RCS of class m to switch the signal of the second input ( DIGITAL IN 2 ) to the first digital output DIGITAL OUT 1 . The RCS executes the command and sends the acknowledge which informs via the status register about the auto s ...

  • Barco DOC-3200-2 - page 35

    Command "t": interconnection digital input 1 to digital output 1 Description: Via this command the RCM tells the RCS of class m to switch the signal of the first input ( DIGITAL IN 1 ) to the first digital output DIGITAL OUT 1 . The RCS executes the command and sends the acknowledge which informs via the status register about the auto swi ...

  • Barco DOC-3200-2 - page 36

    Command "b": interconnection digital input 2 to digital output 2 Description: Via this command the RCM tells the RCS of class m to switch the signal of the second in- put ( DIGITAL IN 2 ) to the second digital output DIGITAL OUT 2 . The RCS executes the command and sends the acknowledge which informs via the status register about the auto ...

  • Barco DOC-3200-2 - page 37

    Command "s": interconnection digital input 1 to digital output 2 Description: Via this command the RCM tells the RCS of class m to switch the signal of the first input ( DIGITAL IN 1 ) to the second digital output DIGITAL OUT 2 . The RCS executes the command and sends the acknowledge which informs via the status register about the auto sw ...

  • Barco DOC-3200-2 - page 38

    5.4 Enablin g / D isa bling auto switch The auto switch functionality allows H ERMES DXD to automatically connect an output to the other input if there is no longer a sync signal on the input previous connected to this output. This functionality pro- vides redundancy (inspite of a crash, there will be signal displayed on the projection modules), bu ...

  • Barco DOC-3200-2 - page 39

    Command “k”: Disabling auto switch Description: Via this command the RCM tells the RCS of class m to disable auto switch The RCS executes the command and sends the acknowledge which informs via the status register about the auto switch status. Example: The command k is sent to the second RCS : Message <STX> <TYPE> <ADDRH> < ...

  • Barco DOC-3200-2 - page 40

    5.4.1 Comma n d s referring to settings The connections of H ERMES DXD (which input is connected to which output) as well as the status of the auto switch functionality make up the settings of H ERMES DXD and can be saved and restored on the device. The native configuration (factory configuration) of H ERMES DXD is saved in the default settings . I ...

  • Barco DOC-3200-2 - page 41

    Command “i”: save user settings Description: Via this command the RCM tells the RCS of class m to save the current configuration as user settings. These are the features to be saved: connection of DIGITAL OUTPUT 1 connection of DIGITAL OUTPUT 2 status of auto switch The RCS executes the command and sends the acknowledge which informs via the st ...

  • Barco DOC-3200-2 - page 42

    Let's assume that the following routing is saved as user settings: DIGITAL OUTPUT 1 is connected to DIGITAL INPUT 2 DIGITAL OUTPUT 2 is connected to DIGITAL INPUT 1 Autoswitch enabled Let's further assume that there is a sync signal on DIGITAL INPUT 1 , and no sync signal on DIGITAL INPUT 2 . Therefore the actual configuration differs fro ...

  • Barco DOC-3200-2 - page 43

    5.5 Readin g t he status register Although the information about the status register is sent back by the RCS as part of the acknowledge, it might be useful to ask it directly. Command “o”: read status register Description: Via this command the RCM tells the RCS of class m to read the status register. The RCS executes the command and sends the a ...

  • Barco DOC-3200-2 - page 44

    5.6 Readin g t he product identification The entire product information "finger print" is saved in an EEPROM and can be read and evaluated. This information is a very useful diagnostic help for the Barco support technician. Command “v”: read product information Description: After having received this command, the RCS will send the des ...

  • Barco DOC-3200-2 - page 45

    5.7 Error m e s s ages Three different kind of errors might occur:  The body is an invalid command  The checksum is not correct  The device cannot be addressed (it might be switched off…) The information sent back to the RCM about these errors does not include the status register Error Protocol "EP" Description: Via this answer ...

  • Barco DOC-3200-2 - page 46

    Original message is sent back to the RCM Description: Via this answer the RCM recognizes that the desired RCS cannot be addressed (might be it has been switched off…) Example: The RCM has sent the following command: Message <STX> <TYPE> <ADDRH> <ADDRL> <Body> <STATH> <STATL <CHKH> <CHKL> <ETX& ...

  • Barco DOC-3200-2 - page 47

    6 Broad c a s t addressing mode This chapter describes how all Remote Control Slaves of a class are addressed simultaneously. ...

  • Barco DOC-3200-2 - page 48

    6.1 Structu r e of message The messages consists out of a RCS -independent and a RCS -dependent layer. The RCS -independent parts are interpreted the same by all types of devices. The RCS -dependent parts contain specific com- mands for a certain type of RCM : the message body. A message has the following structure: <STX> <TYPE> <ADD ...

  • Barco DOC-3200-2 - page 49

    6.3 Comm a n ds for broadcast addressing In principle, all commands can be sent in broadcast addressing mode, however, some of the valid com- mands are not very useful to be sent to all of the RCS simultaneously. The following table lists the commands for reasonable broadcasting addressing. For H ERMES DXD it's the switching commands which are ...

  • Barco DOC-3200-2 - page 50

    7 Techn i c a l Data ...

  • Barco DOC-3200-2 - page 51

    7.1 Genera l D ata 7.1.1 Dimens i o ns characteristic specification weight 2980g W×H×D 378mm × 61mm × 304mm Table 7-1 7.1.2 Power S u p pl y characteristic specification AC power supply 100-240V mains frequency 50/60Hz power consumption max. 10W inrush current 110V 230V < 18A < 36A outlet Same as input Table 7-2 ...

  • Barco DOC-3200-2 - page 52

    7.1.3 Operati n g Conditions characteristic specification operating temperature 0 .. 50 degrees Celsius (32 .. 122 °F) humidity 8 .. 80% non condensing Table 7-3 ...

  • Barco DOC-3200-2 - page 53

    7.2 Interfac e s 7.2.1 Remote I n 1 6 9 5 1 - 6 - 2 TXD 7 - 3 RXD 8 - 4 - 9 - 5 GND Table 7-4 7.2.2 Remote O ut 1 6 9 5 1 - 6 - 2 TXD 7 - 3 RXD 8 - 4 - 9 - 5 GND Table 7-5 ...

  • Barco DOC-3200-2 - page 54

    7.2.3 Digital I n Pin Signal Assignment Pin Signal Assignment 1 TMDS Data 2- 13 - 2 TMDS Data 2+ 14 - 3 TMDS Data 2 Shield 15 Ground (+5, Analog /V Sync) 4 - 16 - 5 - 17 TMDS Data 0- 6 DDC Clock 18 TMDS Data 0+ 7 DDC Data 19 TMDS Data 0 Shield 8 - 20 - 9 TMDS Data 1- 21 - 10 TMDS Data 1+ 22 TMDS Clock Shield 11 TMDS Data 1 Shield 23 TMDS Clock + 12 ...

  • Barco DOC-3200-2 - page 55

    7.3 Parts L i s t 7.3.1 Hermes D XD order no. designation RSAVC31870 H ERMES DXD RSCBL32060 DVI-DVI cable, copper, 2m RSCBL32062 DVI-DVI cable, copper, 5m RSCBL32063 DVI-DVI cable, copper, 10m RSCBL32040 DVI-DVI cable, fibre, 10m RSCBL32041 DVI-DVI cable, fibre, 20m RSCBL32042 DVI-DVI cable, fibre, 50m RSCBL32043 DVI-DVI cable, fibre, 100m RSCBL320 ...

  • Barco DOC-3200-2 - page 56

    7.4 Addres s 4 Barco Control Rooms GmbH An der Rossweid 5 • D-76229 Karlsruhe • Germany Phone (49) (721) 6201-0 • Fax (49) (721) 6201-298 E-mail info.de.bcd@barco.com Web www.barcocontrolrooms.de 4 BarcoProjection Noordlaan 5 • B-8520 Kuurne • Belgium Phone (32) (56) 36-8211 • Fax (32) (56) 36-8251 E-mail sales.bcd@barco.com • Web www ...

Manufacturer Barco Category Marine Lighting

Documents that we receive from a manufacturer of a Barco DOC-3200-2 can be divided into several groups. They are, among others:
- Barco technical drawings
- DOC-3200-2 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco DOC-3200-2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco DOC-3200-2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco DOC-3200-2, service manual, brief instructions and user manuals Barco DOC-3200-2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco DOC-3200-2.

Similar manuals

A complete manual for the device Barco DOC-3200-2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco DOC-3200-2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco DOC-3200-2.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco DOC-3200-2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco DOC-3200-2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco DOC-3200-2, that we can find in the current document
3. Tips how to use the basic functions of the device Barco DOC-3200-2 - which should help us in our first steps of using Barco DOC-3200-2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco DOC-3200-2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco DOC-3200-2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco DOC-3200-2?

Use the form below

If you did not solve your problem by using a manual Barco DOC-3200-2, ask a question using the form below. If a user had a similar problem with Barco DOC-3200-2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)