Manual Barco HDX W12

340 pages 43.22 mb
Download

Go to site of 340

Summary
  • Barco HDX W12 - page 1

    HDX se r ie s User and Instal lat ion manual For HDX , HDX W12, HDX W14,HDX W18 and HDX W20 R5905032/13 05/12/2014 ...

  • Barco HDX W12 - page 2

    Product revision Software versi on: 1.8. Barc o nv Noordlaan 5, B-8 520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Belgium ...

  • Barco HDX W12 - page 3

    Factories: Barco nv Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.1 1 Fax: +32 56.36.883.86 Support: www .barco.com/esupport Visit us at the web: www .barco.com Barco Vi sual (Beijing) El ectronics Co., Ltd 巴可 伟视 (北京) 电 子有限公司 No. 16, Changsheng Road, Chang Ping District 北京市昌平 区中 关 村科技 园区昌平? ...

  • Barco HDX W12 - page 4

    of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the int en t or gross negligence or part of Barco. If the purchaser or a third party carries out m odi fi cations or repairs on goods delivered by Barco, or if the goods are ha ...

  • Barco HDX W12 - page 5

    Tabl e of cont ents T ABLE OF C ONTENTS 1 . S a f e t y...... .... ...... ........ .......... ........ ........ ...... ........ ........ ...... ........ ........ ...... ........ ..... 7 1.1 General considerations ........................... ....................... .............................. .............................. . 7 1.2 Important safet ...

  • Barco HDX W12 - page 6

    Tabl e of cont ents 8 . I n p u t ....... ........ ........ ...... ........ ........ ...... ........ ........ ...... ........ .......... ........ ........ ......7 5 8.1 Input menu overview .............. .............................. ...................................... .............................. 7 5 8.2 Input Selection ..................... ...

  • Barco HDX W12 - page 7

    Tabl e of cont ents 10.4.5 PiP window, positi o n . .............................. .............................. ...................... ...................... 1 4 3 1 0 . 5 L a y o u t F i l e S e r v i c e s.............................. ....................... .............................. ...................... .......1 4 5 10.5.1 Load layout ...

  • Barco HDX W12 - page 8

    Tabl e of cont ents 1 3 . P r o j e c t o r C o n t r o l . ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ..... 2 1 9 13.1 Projector Control menu overview . .............................. ............... ....................... ............................. 2 1 9 13.2 Individual Projector A ...

  • Barco HDX W12 - page 9

    Tabl e of cont ents 1 6 . S e r v i c i n g .... ........ .......... ........ ........ ...... ........ ........ ...... ........ .......... ........ ........ ...... 2 9 3 16.1 Inserting an input mo dule . . ...................... ............... ....................... .............................. .............. 2 9 3 16.2 Removal of the lamp hous ...

  • Barco HDX W12 - page 10

    Tabl e of cont ents 6 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 11

    1. Safety 1. SAFETY About this chapter Read this chapter at tentively . It contains important i nform ation to pr ev ent personal injur y while installi n g and using a HD X projector . Furthermore, it incl udes several cauti o ns to prevent damage to t he HDX projector . Ensure that you understand and follow al l safety guidelines, safety instruct ...

  • Barco HDX W12 - page 12

    1. Safety the potential risk to themselves or other persons. T he term USER and OP ERA TOR refers to any person other than SERVICE PER- SONNEL, AUTHOR IZED to operate profes s ional proj ec tion s ystems. A HDX projector is intended "FOR PR OFESSION AL USE O NL Y" by AUTH ORIZED PER SONNEL familiar w ith potenti a l hazards associated wit ...

  • Barco HDX W12 - page 13

    1. Safety • It is hazardous to op erate without lens or shield. Lenses, shields or ultra violet screens shall be changed if they have becom e visibly damaged to such an extent that their eff ec tiveness is impaired. For example by cracks or deep scratches. • W arning: Protection from ultraviolet radiation : Do not look directly in the light bea ...

  • Barco HDX W12 - page 14

    1. Safety • Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Never use strong solvents, such as thinner or benzine, or abrasive cleaners, since these will damage the cabinet. Stubborn stains may be removed with a cloth li ghtly dampened with mild detergent sol ...

  • Barco HDX W12 - page 15

    1. Safety • Use an appropriate forklift to rais e fl ight cases and take the necessary precautions to avoid personnel injury . R5905032 HDX SERIES 05/12/2014 11 ...

  • Barco HDX W12 - page 16

    1. Safety 12 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 17

    2. Gener al 2. GENERAL About this chapter Read this chapter before installing your HDX projector . It contains important information concerning installation requirements for the HDX projector , such as m inimum and max imum allowed ambient t emperature, humidity conditions, required safety area arou nd the installed projec tor , required power net, ...

  • Barco HDX W12 - page 18

    2. Gener al particl e s in the environment of the projector . The manufacturer reserves the right to ref use repair if a projector has been subject to knowingly neglect, abandon or improper use. Main Power requirements The HDX projector operat es from a nominal mono phase power net with a separate earth ground PE. Power requirements : 1 10-130V/200 ...

  • Barco HDX W12 - page 19

    2. Gener al Image 2-2 Remove carton and foam rub ber 3. T ake out the foam rubber . 4. T ake out the projector . Save the original shipping carton and packing material, they will be necessary if you ever have to ship your projector . F or maximum protection, repack your projector as it was originally packed at the factory . A rubber foam inside a p ...

  • Barco HDX W12 - page 20

    2. Gener al One xeno n lamp is mount ed inside t he lamp house at de liver y . The pr ojector len ses are not i ncluded i n the package of the projector . Mechanica l check This check should con fi r m that there are no broken knobs or connectors, that t he cabinet and panel surfaces are free of dents and scratches, and that the operating panel is ...

  • Barco HDX W12 - page 21

    2. Gener al F/C AUDIENCE F/T FLOOR SCREEN Image 2-4 Front pr ojection F/C AUDIENCE FLOOR SCREEN Image 2-5 Front pr ojection, Ce iling m ounted, in ta ble position Rear projection The projector is installed, either in a table mount or ceiling moun t con fi guration, at the other si de of the screen opposite the audience. AUDIENCE BACKST AGE R/C R/T ...

  • Barco HDX W12 - page 22

    2. Gener al AUDIENCE BACKST AGE R/C FLOOR SCREEN Image 2-7 Rear proj ection, ceiling moun ted in table posit ion Positionin g the projector FLOOR SCREEN SCREEN PD A CD SCREEN SW SW SH B SH B CD Image 2-8 Pos ition ing proj ecto r The projector should be installed at right angles (horizontally and vertically) to the screen at a distance PD. Note the ...

  • Barco HDX W12 - page 23

    2. Gener al Shift range The lens can be shifted with respect to the DMD (P) which result in a shifted image on the screen (Off-Axis). A 100% shift means that the centre point of the projected image is shifted by half the screen si z e. In other words, the centr e point of the projected image falls together with t he outline of the image in an On-Ax ...

  • Barco HDX W12 - page 24

    2. Gener al C Tilting allo wed but l amp fl icker possible Projector lamp will not start up when out of tilt range due to build-in tilt sensor . 2.6 Projector air inlets and outlets Air inlets and outlets Image 2-1 1 The HDX projector has 3 air inlet channels and 3 air outlets. The air outlets are locat ed at the rear of the projector . T he air i ...

  • Barco HDX W12 - page 25

    2. Gener al 1. Go to my .barco.com on h ttps :m y .bar co.co m . 2. Login on my .barco.com. If you are not yet registered click on Si gn up for my .bar co.co m and follow the instructions. With the created l ogin and pass- word, it is possible to enter the my .barco.com. When your login is correct, the my .barco.com start page is dis played. 3. C ...

  • Barco HDX W12 - page 26

    2. Gener al 22 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 27

    3. Ph ysical ins tallat ion 3. PHYSICAL INST ALLA TION About this projector This chapter describes how the mechanical set up of the pr ojector has to be done and how t o realize the electrical connections. Overview • Rem ote control unit (RCU) • Lenses • Connec ting t he projector with the power net • Alignm ent of a table mounted p rojecto ...

  • Barco HDX W12 - page 28

    3. Ph ysical ins tallat ion How to install the batteries in the remote control ? 1. Push the battery cover tab with the fi ngernail a li ttle backwards (1) and pull, at t he s ame time, the cover upwards (2). 1 2 Image 3-2 2. Insert the two AA size batteries, making sure the polar ities match the + and - marks inside the battery compartment. + + - ...

  • Barco HDX W12 - page 29

    3. Ph ysical ins tallat ion Image 3-5 3.1.3 RCU XLR ada ptor installation Install the rugged case before installing the XLR ad aptor . Vice-versa, rem ove the XLR adaptor before remo ving the rugge d case from the RCU. Necessary t ools 5m m fl at s crew driver. How to install the XLR adaptor of the remote co ntrol unit ? 1. Push the XLR adaptor (C ...

  • Barco HDX W12 - page 30

    3. Ph ysical ins tallat ion Image 3-7 3.1.5 RCU usa ge possibilit ies Summarized p ossibilities Ref. Possibility description Comment a. RCU not wired b. RCU wired (mini-jack) Backlight illuminates continuously when wire i s connected. Infra red disabled. c. RCU with rugged case not wi r ed d. RCU with rugged case wired (mini-jack) Backlight illumin ...

  • Barco HDX W12 - page 31

    3. Ph ysical ins tallat ion 3.2 Le nses Overview • Available lenses • Lens selection • Lens installation • Lens removal • Lens safety cable • Lens shift, zoom & focus • Scheimp fl ug adjustment 3.2.1 Available lenses A vailable lenses for the H DX projector projector The TLD HB (High Brightness) lens series can be used on the HDX ...

  • Barco HDX W12 - page 32

    3. Ph ysical ins tallat ion Image 3-18 R9862010 : TLD+ zoom lens (1.5 - 2.0 : 1) Image 3-19 R9862020 : TLD+ zoom lens (2.0 - 2 .8 : 1) Image 3-20 R9862030 : TLD+ zoom lens (2.8 - 4 .5 : 1) Image 3-21 R9862040 : TLD+ zoom lens (4.5 - 7.5 : 1) Image 3-22 R9829997 : TLD+ zoom lens (7.5 - 1 1 .0 : 1) 3.2.2 Lens se lection How to select the right lens 1 ...

  • Barco HDX W12 - page 33

    3. Ph ysical ins tallat ion Image 3-23 Lens calc ulator The Lens Calculator can also be u sed to determine the position of the projector when the lens type and screen widt h is known. 3.2.3 Lens in stallation How to install 1. R emove the foam rubber in the opening of the lens holder if not removed yet. 2. T ake the l e ns assembly out of it s pack ...

  • Barco HDX W12 - page 34

    3. Ph ysical ins tallat ion Image 3-25 Lens insert ion 6. Insert the lens until the connector seats int o the socket. Warning: Do not release the Lens yet, as the Lens m ay fall out of the Lens Holder . 7. Secur e the lens in the l ens holder by sliding the lens lock handle into the “locked” position, which is away from the lens power supply so ...

  • Barco HDX W12 - page 35

    3. Ph ysical ins tallat ion 2. Gently pull the lens out of the lens holder . Image 3-28 Lens removal It’ s recomm ended to place the L ens caps of the original Lens p ackaging, back on both side s of the removed Lens to prot ect the optics of th e Lens. It’ s recommen ded to place the foam rubber of the original projector packaging, back into t ...

  • Barco HDX W12 - page 36

    3. Ph ysical ins tallat ion 1 2 3 3 Image 3-29 Lens safet y cable 1 Lens motor block 2 Mounting fl ange 3C l a m p 2. Insert both cable sides into the clamp; Strap the cable and make sure that the clamp is positioned on 45° from the bottom to avoid interference of the cable with the lens locking mechanism. Secure the cable by fi xating the nut o ...

  • Barco HDX W12 - page 37

    3. Ph ysical ins tallat ion Image 3-31 3.2.6 Lens shift, zoom & focus Via Lens key 1. Pres s LENS key on the loc al keypad or the remote control. The zoom/focus menu opens. Image 3-32 Zoom/Focus adj ustment 2. U se the ▲ or ▼ k ey to zoom the lens. Use t he ◄ or ► key to focus the lens. Pres s ENTER t o switch to Lens s hift adjustment. ...

  • Barco HDX W12 - page 38

    3. Ph ysical ins tallat ion Image 3-33 Shift ad justment 3. U se the ▲ or ▼ key to shift the lens in vert ic al direct ion. Use t he ◄ or ► key to shift the lens in hori z ontal dir ection. Pres s ENTER to sw itch t o zoom /focus adjustment. Via direct access keys o n the remote contro l 1. Pres s LENS FOCUS button [-] or [+] ( C ) for an o ...

  • Barco HDX W12 - page 39

    3. Ph ysical ins tallat ion Sche imp fl ug adjustment points 4 1 2 3 d D c C A a B b Image 3-35 Scheimp fl ug a djustments Indic atio n on drawing Funct ion 4 Locking nut 1, 2 and 3 Scheimp fl ug adjustment nuts A, B, C and D Set sc rews a, b, c and d lock nuts 1, 2 and 3 are adjustment points. 4 is a locking poi n t and NOT used during Scheimp ...

  • Barco HDX W12 - page 40

    3. Ph ysical ins tallat ion 5. Optimize the focus of the projected image as follows: a) Place the zoom lens in TELE position (smallest projected image) and adjust the focus using the l ens focus barrel or motorized focus control. b) Place the zoom lens in WIDE position ( largest projected image) and adjus t the focus by tur ning equally on nut 1, 2 ...

  • Barco HDX W12 - page 41

    3. Ph ysical ins tallat ion 2 F Image 3-39 Right bott om focusin g 8. Sharpen top right corner of t he s creen by adjusting nut 3 3 F Image 3-40 Corner f ocusing 9. R epeat from st ep 6 until the projected focus pattern is as s harp as possible in t he center , left, right, top and bottom of the screen. How to fi xt h eS c h e i m p fl ug Start t ...

  • Barco HDX W12 - page 42

    3. Ph ysical ins tallat ion 1/3 to 1/2 Image 3-41 4. Fas ten lock nut d. 5. Tighten nut 4 until the of fset of the image m ovement created in step 3 is canceled. Tip : The amount of i m age movement in step 3 will determine how tight the nut in step 5 will need t o be turned t o return the image to its original p osition. 3.3 Connecting the project ...

  • Barco HDX W12 - page 43

    3. Ph ysical ins tallat ion 4. C onnect the mal e side of the power cord to t he local power net. Caution: Ensure that t h e power net meets the power requirements of the projector . W ARNING : Do not attempt operation i f the A C suppl y and c ord a re not withi n the speci fi ed voltage and power range. C AUTION : Once t he projector i s switc h ...

  • Barco HDX W12 - page 44

    3. Ph ysical ins tallat ion How to mount 1. Turn the projector upside down. 2. Turn out t he 4 feet. Image 3-45 Remove feet 3. Turn out the feet of the carry handle as f ar as possible. Image 3-46 Mount carry h andle 4. P lace the carry handle on the proj ector as illustrated. Adjustment knob to the back of the projector . Make sure that the m ount ...

  • Barco HDX W12 - page 45

    3. Ph ysical ins tallat ion 1 2 Image 3-47 Insert bolts 3.6 Mounting the top carry handler Purpos e This carry handle can be used to transport the projec tor in an easy way . Necessary t ools 8 mm A llen wrench Necessary p arts • 4x bolt M10 x 16 • 4x was her • 1x carry handler How to mount 1. Place the carry handle on top of the projector so ...

  • Barco HDX W12 - page 46

    3. Ph ysical ins tallat ion 3.7 Suspens ion of the projector with rigging clamps Rigging points and rigging cl amps When a carrying handle is mounted at the bottom side of the projector , eight s lots are available to mount riggi ng clamps. Four slot s are longitudinally (1) oriented and four slots ar e transversely (2) or iented. Each slot c ontai ...

  • Barco HDX W12 - page 47

    3. Ph ysical ins tallat ion 3. Turn in the r igging clamps into the r igging points using a 17 mm open ended spanner and secure the ri g ging clamps by turning the safety nut on the rigging clamp against the rigging point using a 17 mm open ended spanner . Image 3-52 Mount ri gging cla mps Warning: Always use four (4) rigging points, equally spread ...

  • Barco HDX W12 - page 48

    3. Ph ysical ins tallat ion 7. L ock all four r igging clamps by turning the fi xation handle clockwise. Image 3-54 Clamp fi xation 8. Install the 2 safety cables, one on both sides of the carrying handle, and around the trus s . Mount the 2 safety cables around the carry handle (push the hook through the loop and then ar oun d the truss so that ...

  • Barco HDX W12 - page 49

    3. Ph ysical ins tallat ion Skew Image 3-56 Skew adju stment Tilt adjustment with the clamps 1. Ad just both front side clamp or both back side clamps to adjust the tilting. Always adjust by two to avoid deformation of the frame. 2. L oosen the secur ity nut on bot h clamps. 3. Adjust the adjustm ent nuts of both clamps until the desired tilting is ...

  • Barco HDX W12 - page 50

    3. Ph ysical ins tallat ion 46 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 51

    4. Input & Co mmun ica tion 4. INPUT & COMMUNICA TION Overview • Introduction • Input s ource connections • Com munication connections • U tility-Accessory O utlet 4.1 Introduction Gene ral The Input & Communication side of the projector consists of a button module, a dual 3G/HDSDI and DVI-I input as standard input module and 2 ...

  • Barco HDX W12 - page 52

    4. Input & C ommuni cation 4.2 Input source connections DVI and 3G/HDSDI input This input module is standard deli v ered with the HDX projector . DUAL LINK DVI-I HDCP INPUT SEL SYNC 3G/DUAL HDSDI OUT1 IN1 IN2 OUT2 SEL SYNC SEL SYNC R9864000 Image 4-2 Dual Link DVI and 3G/Dual HDSDI input The yellow LED lights up when valid input sync is detecte ...

  • Barco HDX W12 - page 53

    4. Input & Co mmun ica tion • Data and HD sources RGB and Y UV [HS/VS, CS or SOG(Y)]: - Pixel clock maximum 210 MH z - 8 bit digital output • Video sources CVB S, S-VIDEO, RG B and YUV [CS, CV or SOG (Y)]: - P AL B/D/I /G/H, P AL60 , P AL M, P AL N, P AL Nc - NTSC M/J, NTS C 4 . 43 - SECA M B/D/G/ K/L - 525i, 625i, 525 p, 625p - Macrovision ...

  • Barco HDX W12 - page 54

    4. Input & C ommuni cation • HDMI (High-De fi nition Multimedia Interface) HDMI 1.4a up to 210MHz pixel clock. Support for ‘Deep Color’ up to 12 bit per color . • DisplayPort DisplayPort 1.1a up to 210 MHz pixel clock. Support for ‘Deep Color’ up to 12 bit per color . In all cases, the minimum input frequency for 3D is 23 Hz per ey ...

  • Barco HDX W12 - page 55

    4. Input & Co mmun ica tion Pin Description 2 Cold 3H o t 4 Return - (or not used) 5 Return + (or not used) DMX DMX-512 Lighting protocol over RS-485 interface. Carries information of 512 channels from a lighting con troller to lighting devices. Standardized by USITT . Wired remote contr ol (XLR) If desired the remote control unit can be wi red ...

  • Barco HDX W12 - page 56

    4. Input & C ommuni cation RS232 An Electronic Industri es A ssociation (EIA) serial digital interface standard speci f ying t he characteristics of the commu- nication path between two devices using either D-SUB 9 pi ns or D-SUB 25 pins connectors. This st andard is used for relatively short - range communications and does not specify bal ance ...

  • Barco HDX W12 - page 57

    4. Input & Co mmun ica tion Functi on Color Descrip t ion PWR orange See chapter “ Getting start ed ”, topic “ Status LEDs ” LMP orange See cha pter “ Gett ing start ed ”, topic “ Status LEDs ” 4.4 Utilit y-Accessory Outlet What can be done ? An extra DMX controlled accessory can be added to projector . Some examples of the use ...

  • Barco HDX W12 - page 58

    4. Input & C ommuni cation 54 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 59

    5. Getti ng started 5. GETTING ST ARTED Overview • RCU & Local k eypad • T erminology overview • Pow er on projector • Sw itc hing to st andby • Pow er off projector • Status LEDs • Using the RCU • Projector Address • Sou rce selection 5.1 RCU & Local keypad How controlling the projector ? The projector can be controlled b ...

  • Barco HDX W12 - page 60

    5. Get ting s tarted MENU EXIT ENTER PA US E TEXT PHASE TINT COLOR BRIGHTN CONTR 9 0 7 8 5 6 3 4 1 2 LENS LENS ZOOM LENS SHIFT LENS FOCUS  SHARPN LENS SHIFT 5 * % 3 $ 7 7 ( 5 1 3 , 3 : , 1 ' 2 : 5 , * * , 1 * $ 8 7 2  , 0 $ * ( 1 2 3 4 5 6 7 89 0 MENU EXIT ENTER RGB STBY PAUSE TEXT PA TTERN WINDOW PIP LENS AUTO F N 1 2 3 4 5 6 7 8 9 10 1 ...

  • Barco HDX W12 - page 61

    5. Getti ng started Ind. Key n ame Description 16 TEXT T oggle key to activate or deacti vate on screen text boxes while adjusting a sett ing. When adjusting one of the image controls, e. g. during a meeting, the normally displayed bar scale can be deactivated by pressing ’ T EXT’ key fi rst. T o re-disp lay t he bar scale on the screen, press ...

  • Barco HDX W12 - page 62

    5. Get ting s tarted Image 5-3 Start up scr een, Main This screen indicates : - the selected Main i np ut - the selected PIP input - the IP address - the Customer Id - the Lamp status - the Mains voltage - the current ambient tem perature - the T ext statu s (OSD ) T o display an image, the standby key must be pressed once. The cu rrent mai ns inpu ...

  • Barco HDX W12 - page 63

    5. Getti ng started • num ber of Strikes • Run time in h ours • Rem aining run ti me in hours • slide bar indication with percentage indi c ation of the current r u n time, compared with the maximum life time of the lamp. Sof twar e overvi ew Once the projector is star ted, press About to get an overview of the soft war e versi ons s uch as ...

  • Barco HDX W12 - page 64

    5. Get ting s tarted MENU EXIT ENTER PAU S E TEXT PHASE TINT COLOR BRIGHTN CONTR 9 0 7 8 5 6 3 4 1 2 LENS LENS ZOOM LENS SHIFT LENS FOCUS  SHARPN LENS SHIFT 5 * % 3 $ 7 7 ( 5 1 3 , 3 : , 1 ' 2 : 5 , * * , 1 * $ 8 7 2  , 0 $ * ( 1 2 3 4 5 6 7 89 0 MENU EXIT ENTER RGB STBY PAU S E TEXT PA TTERN WINDOW PIP LENS AUTO Fn Image 5-6 Standby key ...

  • Barco HDX W12 - page 65

    5. Getti ng started C AUTION : Never switch off the projector while the message ’Saving data ... ’ is displayed ! 5.6 Status LED s Overview LED Color sta tus Description Red on Projector is in standby Red toggles on/ off Projector startup failed, no lamp power sup ply Green toggles on/off Projector starts up Green on Projector is on Orange t og ...

  • Barco HDX W12 - page 66

    5. Get ting s tarted F1 F2 F3 F4 F5 AD J EX IT EN TE R PA US E PH AS E TE XT SH AR PN TI NT CO LO R BR IG HTN CO NTR TR EB LE BA LA NC E BA SS VO L 90 7 8 5 6 34 1 2 Image 5-7 IR control via re fl ective scr e en Hardwire d to the XLR input 1. Plug one end of the remote cable in the connector on the bottom of the RCU. 2. Plug the other end in the ...

  • Barco HDX W12 - page 67

    5. Getti ng started 5.8 Projector Address 5.8.1 Displaying an d Programming a ddresses in to the RCU Displaying the Projector Address on th e Screen. 1. Pres s Address key (r e cessed key on the RCU) with a penc il. The projector ’ s address is displayed on the loc al LCD screen. T o continue using the RCU with that speci fi c address, it is nec ...

  • Barco HDX W12 - page 68

    5. Get ting s tarted Source selection when picture in picture is active Use the W indow button on the remote contr o l or t he local keypad to select the main window or t h e picture in picture (PiP) window . MENU EXIT ENTER PAU S E TEXT PHASE TINT COLOR BRIGHTN CONTR 9 0 7 8 5 6 3 4 1 2 LENS LENS ZOOM LENS SHIFT LENS FOCUS  SHARPN LENS SHIFT 5 ...

  • Barco HDX W12 - page 69

    6. Quick set up adj ustm ent 6. Q UICK SET UP ADJ USTME NT Overview • T ext boxes ON or OFF • Quick Lens A djustment via LENS key • Direct Lens Adjustment (RC U) • Q uick picture in pictur e • Quick language selection 6.1 T ext boxes ON or OFF T ext toggle function The on-screen text boxes can be switched OFF so that an adjustment during ...

  • Barco HDX W12 - page 70

    6. Quick s et up adjustm ent 1 2 3 4 5 6 7 89 0 MENU EXIT ENTER RGB STBY P AUSE TEXT P ATTERN WINDOW PIP LENS AUTO F N MENU EXIT ENTER PA U S E TEXT PHASE LENS  5 * % 3 $ 7 7 ( 5 1 3 , 3 : , 1 ' 2 : $ 8 7 2  , 0 $ * ( 1 1 Image 6-2 Lens button Image 6-3 Zo om/F ocus ad just ment 2. U se the ▲ or ▼ k ey to zoom and ◄ or ► key to f ...

  • Barco HDX W12 - page 71

    6. Quick set up adj ustm ent Image 6-4 Zoom/Focus adj ustment 2. Pres s ENTER to go to th e Shif t menu. Image 6-5 Shift ad justment 3. U se the ▲ or ▼ key to shift the lens in vert ic al direct ion. Use t he ◄ or ► key to shift the lens in hori z ontal dir ection. Pres s ENTER to sw itch t o zoom /focus adjustment. 6.3 Direct Lens Adjustme ...

  • Barco HDX W12 - page 72

    6. Quick s et up adjustm ent CONTR 1 2 LENS ZOO M LENS SHI FT LENS FOC US LENS SHI FT A C B D Image 6-6 Direct lens adj ustment keys AZ o o m B V ertical shi ft CF o c u s D Horizontal shi ft 2. Pres s LENS FOCUS button [-] or [+] ( C ) for an overall focus of the image. 3. Pres s ▲ LENS SHIF T ▼ button for correct vertical position of the imag ...

  • Barco HDX W12 - page 73

    6. Quick set up adj ustm ent MENU EXIT ENTER  5 * % 3 $ 7 7 ( 5 1 3 , 3 : , 1 ' 2 : 1 Image 6-8 Info button The language selection menu is displayed on the screen. Select the desired language wit h the ▲▼ key and press ENTER t o activate. The current active l anguage is indicated with a s elected radio button Image 6-9 Change lan guage ...

  • Barco HDX W12 - page 74

    6. Quick s et up adjustm ent Image 6-10 Main men u Image 6-1 1 Projecto r C ontrol Image 6-12 Change language 70 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 75

    7. Start up of the a djust ment mode 7. S T ART UP OF THE ADJ USTME NT MODE Overview • Abo ut the adjustment mode • Abo ut the us e of the remote control and the local keypad • Start up the adjustment mode • Navigation and adjustm ents • Me nu memory • Sho rt cut keys to the menus • T est patterns in adjustment mode • Help informati ...

  • Barco HDX W12 - page 76

    7. Start up of the a djustmen t mode The main menu of the adjustment m ode opens. Image 7-1 Main me nu 7.4 Navigation and adjustme nts How to na vigate in the me nu structure? On ce in the me nu str uctu re, u se the ▲ or ▼ k ey on the remote control or on the local keypad to s croll through the items in the displayed menu. The selected i tem w ...

  • Barco HDX W12 - page 77

    7. Start up of the a djust ment mode Use the ◄ or ► key to adjust the current value. The ba r scale will move accord ingly . Press EXIT to fi nalize the adjustment. or , When the bar scale is displayed, via direct input. Press ENTER to activate the i nput fi eld. Image 7-4 Direct contrast ad justment Enter the desired value w i th the digit k ...

  • Barco HDX W12 - page 78

    7. Start up of the a djustmen t mode 7.7 T est patterns in adjustment mode Overview When the adjustment mode is started, a test patter n can be called at any moment just by pressing the Pattern k ey on the RCU or the local key path. Press as many times on the Pattern key as necessary to display the desired test pattern. T he test pattern remains on ...

  • Barco HDX W12 - page 79

    8. Inpu t 8. INPUT Overview • Input menu overview • Input Selec tion • Advanced Settings • Input locking • Minim um delay • Native resolution • No Signal •E D I D • 3D input In all cases, the minimum input frequency for 3D is 23 Hz per eye. Belo w this frequency the image will not be displayed correctly . 8.1 Input menu overview O ...

  • Barco HDX W12 - page 80

    8. Input Logo [On/Off] Shutdown [Off/ On] Shutdown time Auto dimming [On/Of f] EDID Con fi gure Create Delete Delete Al l 3D Status Auto Detection Input type Frame sequential - Single channel Frame sequential - Dual channel Frame packing (FHD3D) Side-by-side T op-and-bottom SENS IO ® HI-FI 3D Line Alternating (3G) Second input 8.2 Input Selection ...

  • Barco HDX W12 - page 81

    8. Inpu t Image 8-3 Select source 8.3 Advanced Settings Overview • Abo ut Input Setup • Input con fi gura tio n • DV I - RGB input • SD I input • 5 cable input • HDM I - DisplayPort input (3 D input module) 8.3.1 About Input Setup Overview Each input module m ust be con fi gured before these module can be used. This con fi guration i ...

  • Barco HDX W12 - page 82

    8. Input Image 8-6 Advanced set tings, inp ut selection 8.3.3 DVI - RGB input How to select Select DVI / RGB and press ENTE R to open the selections Image 8-7 DVI selecti on The following selections are possi b le: •D V I • DV I - dual link • RGB HS -VS/ CS • YUV HS-VS/CS •A U T O DVI will not na tively suppo rt 10-b it or 12-bi t deep co ...

  • Barco HDX W12 - page 83

    8. Inpu t 8.3.4 SDI input About SDI input The Dual SD/HD/3G-SDI Input can accept standard-de fi nition (SD), high-de fi nition (HD) and 3 Gigabit-de fi ni tion se rial - digital- inter- face (SDI) signals . How to select Select SDI (SD / H D / 3G / Dual) and pres s ENTER to open the selections Image 8-9 SDI, inp ut type selection The following s ...

  • Barco HDX W12 - page 84

    8. Input 3G-A and 3G-B: • Direct M apping (3G-A) • Dual HD ( 3G-B) When Dual HD is s elected, it is possi ble to use Swap li nk s. If Swap links must be used, use the ▲ or ▼ key to select and press ENTER to accept. The check box will be chec ked. Dual HD : • Sw ap links 8.3.5 5 cable input How to select Select 5 cable and press ENTER to o ...

  • Barco HDX W12 - page 85

    8. Inpu t 8.4 Input locking What is possible? The output signal can be locked on an internal sync si gnal or on the sync signal of one of the input sources. Or it can follow the input of the Main window or Pip w indow . W hen locked to the co rresponding input sync, the output will be shown without movement artifacts. With locking t o a speci fi c ...

  • Barco HDX W12 - page 86

    8. Input When Input locking is set to a speci fi c input and there is no sync signal available, the locking will be switched to Free run without changing the user set tings. Once the sync is available, i t applies again the user sett ings. Options for Free Run When free run is sel ected, radio button sel ected, then the Free Run Options become ava ...

  • Barco HDX W12 - page 87

    8. Inpu t Image 8-19 Main window Image 8-20 Inp ut, mi nimum d elay 2. Pres s ENTE R to toggle between [O n] and [Off ]. [On] : images displayed with minimum delay [Off] : images displayed without minimum de lay 8.6 Native resol u tion What ca n be don e The aim here is to always show the resolution of the source independently of the resolution of ...

  • Barco HDX W12 - page 88

    8. Input Sour ce Projected image UXGA 4:3 1600x1200 4 :3 1600x1200 image projec ted wit h black borders left and right. WUXGA 16:10 1920x1200 1 6:10 1920x1200 norm al image projected How to toggle to native resolution? 1. Pres s Men u to a ct ivate the menus and s elect Input → Native Res olution [ On] . 2. Pres s ENTE R to toggle between [O n] a ...

  • Barco HDX W12 - page 89

    8. Inpu t Image 8-24 Main window Image 8-25 Input, no signal Image 8-26 No signal, c olor 8.7.2 Background Logo What can be done ? A logo can be switched on or off . When logo is switched on and a logo i s available, that logo will be displayed when no signal is av ailable for t he main window an no signal available for the PiP window in case PiP i ...

  • Barco HDX W12 - page 90

    8. Input Image 8-29 No signal, l ogo A dedicated logo can be loaded via Projector T oolset with a HDX p lug-i n installed. 8.7.3 Shutdown settings How to change the se ttings 1. Pres s Men u to activate the menus and select Input → No Signal . → Shutdown . Image 8-30 Main window Image 8-31 Input, no signal Image 8-32 No signal, shut down 2. Pre ...

  • Barco HDX W12 - page 91

    8. Inpu t Image 8-33 Main window Image 8-34 Input, no signal Image 8-35 2. Pres s ENTER to toggle between [1] , [3 ] , [5] and [10] minut es. 8.7.5 Auto Di mming About auto dimming When no s ignal is detected on the selected input the lam p power will be reduced from the current value to its minimum value. W hen the input signal is re-detected, the ...

  • Barco HDX W12 - page 92

    8. Input Image 8-38 No signal, aut o dimming 2. Pres s ENTE R to toggle between [On] or [Off] . [On] : when no signal, auto dimming is started. [Off] : when no signal, no auto dimming is s tarted. 8.8 E D ID EDID Extended Display Identi fi cation Da ta About EDID The ED ID fi le available f or DV I input connectors inc ludes timings supported b y ...

  • Barco HDX W12 - page 93

    8. Inpu t Image 8-39 Main window Image 8-40 Input, EDID Image 8-41 EDID , con fi gure Image 8-42 EDID con fi guration Image 8-43 EDID s election lis t 3. U se the ▲ or ▼ key to select the input to con fi gure. Pres s ENTER to open the selection li st. The current active fi le is checked. 4. U se the ▲ or ▼ key t o select the correct fi ...

  • Barco HDX W12 - page 94

    8. Input 8.8. 2 Cre ate cu stom EDID fi le Descriptio n Y ou can create new custom EDID fi l es and enter the desired input t im ings. How to create 1. Pres s Men u to activate the menus and select I npu t → EDID → Create . 2. Pres s ENTE R to open the E DID creation menu. Image 8-44 Main window Image 8-45 Input, EDID Image 8-46 EDID , creat ...

  • Barco HDX W12 - page 95

    8. Inpu t 6. Select the O ptions . If necessary , scroll down to see extr a options. Select or clear the check box es. Image 8-48 EDID fi le creati on, options The following options are possible: - Stereo : this check box is currently not i n use. Y ou can leave it unchecked. - Deep color : select this box in case of a 12 bi t color signal. In t h ...

  • Barco HDX W12 - page 96

    8. Input Image 8-51 EDID, delete 3. U se the ▲ or ▼ key to select the fi le which must be deleted. Pres s ENTER to delete. Image 8-52 EDID, delete lis t Image 8-53 Con fi rma tion Ac o n fi rmation window o pens. 4. S elect Yes to delete the fi le and press ENT ER . 8.8.4 Delete a ll custom ED ID fi le Standa rd EDID fi les cannot b e del ...

  • Barco HDX W12 - page 97

    8. Inpu t Image 8-54 Main window Image 8-55 Input, EDID Image 8-56 Image 8-57 3. S elect Yes to delete all the custom fi le and press ENTER . 8.9 3D input Overview • Abo ut 3D modes •A c t i v a t e 3 D • Auto detection • Input type selec tion • 3D second input • L-R Synchronisation, fi eld dominance • L-R Synchronisation, Invert 3D ...

  • Barco HDX W12 - page 98

    8. Input T o activate t he single channel 3D mode select: MENU > Input > 3D > Frame Sequential – Single Channel Possible sources: DisplayPort, HDMI, dual-link DVI, 5-cable analog ( up to 210 MHz), DVI analog (up to 170 MHz), SDI (up to 150 MHz). With the “Inver t 3D sync out” setting t he content can be switched between the left and ...

  • Barco HDX W12 - page 99

    8. Inpu t 1 SENSIO ® Hi-Fi 3D s tr eam 2 Left expansion 3 Right ex pansion 4 SENSIO ® Hi-Fi 3D interpolation 5 SENSIO ® Hi-Fi 3D interpolation 6 Right s tream 7 Left stream SENSIO ® 3D Decoder - FFC is using both the SEN SIO ® 3D Dec oder as well as the SE NSIO ® A utodetec t functionality . This mode enables an automatic detect ion of 2D, T ...

  • Barco HDX W12 - page 100

    8. Input 2xDVI/2xHDMI/2xDP 1 2xSDI 2 Fpix ≤ 210MHz. Fpix ≤ 150MHz. Max. resolution: 1920x1200@60Hz or 204 8x1080@60Hz. Max. resolution: 1920x1200@30Hz, 2048x1080@30Hz or 1280x720@60Hz. Frame Sequential Dual Channel Progressive only Progressive only SDI (3G - L evel B) 3 Fpix ≤ 150MHz. Line Alternating (3G-B) Max. resolution 1920x1200@30Hz, 20 ...

  • Barco HDX W12 - page 101

    8. Inpu t Image 8-61 3D status 2. Pres s ENTE R to toggle between [On] and [Off] . [On] : 3D activated [Off] : 3D deactivated 8.9.3 Aut o detection About auto detection • Autom atically det ects the 3D format (Frame Pac king, Side-by-Side, T op-and- Bottom) on HDMI sources, based on the content of the HDMI V endor Speci fi c InfoFrame (if presen ...

  • Barco HDX W12 - page 102

    8. Input Image 8-62 Main window Image 8-63 Input, 3 D Image 8-64 3D, auto detecti on 8.9.4 Input type selection About input types • Frame sequential - Single channel : One input contains 3D information, alternating t he left and the right information. • Frame sequential - Dual channel : Two i nputs, one contains the left eye information and the ...

  • Barco HDX W12 - page 103

    8. Inpu t Image 8-65 Main window Image 8-66 Input, 3 D 2. Pres s ENTER to open the 3D menu 3. U se the ▲ or ▼ key to select the desired input type. Image 8-67 3D, input t ype 4. Pres s ENT ER to activate. 8.9.5 3D second input What can be done? 3D content can be entered into t he projector via a single channel ( one input) or v ia 2 channels (2 ...

  • Barco HDX W12 - page 104

    8. Input Image 8-70 3D second sourc e 2. Pres s ENTE R to s el e ct. The Sour ce sel ect ion window opens. 3. U se the ▲ or ▼ key t o se lect the desired input and press ENT ER .. Image 8-71 Second sour ce, select inpu t 8.9.6 L-R Synchronisation, fi eld domina nce About fi eld dominance The Field dominance setting has only effect in the 3D m ...

  • Barco HDX W12 - page 105

    8. Inpu t Image 8-74 2. Pres s ENTER . 3. U se the ▲ or ▼ key to select Field Dominance . Image 8-75 Field dom inance 4. Pres s ENTE R to toggle between [L/R] and [R/L] [L/R] : The 3D SYN C IN signal is used to indicate the l eft and right fi eld sequence. [R/L] : The invert ed 3D S YNC IN signal is used to i ndicate the left and right fi eld ...

  • Barco HDX W12 - page 106

    8. Input Left 3D Sync Left Right Right Inverted 3D Sync Left Right Normal t Left Image 8-76 3D sync o ut How to toggle 3D S YNC OUT 1. Pres s Menu to activat e the menus and select Alignment → 3D Glasses → L/R Synchronisation . Image 8-77 Main window Image 8-78 Input, 3 D 102 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 107

    8. Inpu t Image 8-79 3D, L/R Synchroni sation 2. Pres s ENTER . 3. U se the ▲ or ▼ key to select Invert 3D Sync Out . Image 8-80 Invert 3D Sy nc Out 4. Pres s ENTE R to toggle between [On] and [Off] [On] : 3D SYN C OUT is the invert ed version of the 3D sync signal generated by the processi ng, allowing to swap left and right eye on the active ...

  • Barco HDX W12 - page 108

    8. Input 104 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 109

    9. Image 9. IMAGE Overview • Image menu overview • Start up the Image adjustments • Image settings • Aspect R atio •T i m i n g s • Im age File Servic es • Save c ustom settings • Splash im age 9.1 Image menu overvi ew Overview t able Level 1 L evel 2 Level 3 Level 4 Image Image settings Contrast Brightness Saturation Ti nt Phase Sh ...

  • Barco HDX W12 - page 110

    9. Image T otal vertical lines Active lines V ertical start Advanced settings Clamp delay Clamp width Press Auto Image for new measurement Image fi le service Manual load File load fi lter Delete Delete all Rename Copy Options Save c ustom settings Splash ima ge On or O f f T imeo ut(sec) 9.2 Start up the I mage adjustme n ts Start u p 1. Pres s ...

  • Barco HDX W12 - page 111

    9. Image How to adjust 1. Pres s Men u to activate the menus and select Image → Image Settings → Contrast . Image 9-3 Main menu, Image Image 9-4 Image adjust ments Image 9-5 Image setti ngs, contras t 2. Pres s ENTE R to s el e ct. 3. T o change the value directly in the Image Settings wi ndow , use the ◄ or ► key or a num eric key 0-9 to a ...

  • Barco HDX W12 - page 112

    9. Image Image 9-7 Main menu, Image Image 9-8 Image adjust ments Image 9-9 Image setti ngs, bright ness 2. Pres s ENTE R to s el e ct. 3. T o change the value directly in the Image Settings window , use the ◄ or ► key or a numeric key 0-9, to adjust as a % of the full range. T o adjust via the bar scale m enu, press ENTE R to display the Bright ...

  • Barco HDX W12 - page 113

    9. Image Image 9-1 1 Main menu, Image Image 9-12 Image adjust ments Image 9-13 Image setti ngs, saturat ion 2. Pres s ENTE R to s el e ct. Image 9-14 Saturat ion adjustme nt 3. T o change the value directly in the Image Settings window , use the ◄ or ► key or a numeric key 0-9, to adjust as a % of the full range. T o adjust via the bar scale me ...

  • Barco HDX W12 - page 114

    9. Image Image 9-15 Jitte ring on image Phase adjustment can be done with the Phase key on the RCU or via the menu structure. How to adjust 1. Pres s Men u to activate the menus and select Image → Image S ettings → Phase . Image 9-16 Main menu, Image Image 9-17 Image adjust ments Image 9-18 Image setti ngs, phase 2. Pres s ENTE R to s el e ct. ...

  • Barco HDX W12 - page 115

    9. Image T o adjust via the bar scale menu, press ENT ER to display the Phase menu and adjust with the ◄ or ► key . Pre ss ENTE R again to enter the value direc tly with the numeric keys. Press EXIT to return to Image Se tti ngs menu. 9.3.5 Color temperature ( fi xed values) Color temperatur e The coloration (reddish, white, bluish, greenish, ...

  • Barco HDX W12 - page 116

    9. Image Image 9-23 Depending o n the color space setting, a request window is displayed to ask if the color space setting should be switched to Of f Color temperature selection can only be done when the color space settings is set on Off . Image 9-24 Color tempera ture question Cl ick Ye s to conti nu e. 3. U se the ◄ or ► key to select the de ...

  • Barco HDX W12 - page 117

    9. Image Image 9-27 Image setting s, color tempe rature 2. Pres s ENTE R to s el e ct. 3. U se the ▲ or ▼ key to select Custom Balance .P r e s s ENTER t o accept. Image 9-28 Custom colo r temperature 4. Select G ain Red and press ENTER .U s e t h e ◄ or ► key to a djust t he red gain. Select Gain Blue and pr ess EN TER . Adj ust the blue g ...

  • Barco HDX W12 - page 118

    9. Image Bla ck le vel Δ G ΔΒ Δ R R G B Image 9-30 One can conclude here t hat a good color trackin g can only be met by using three previou sly (input ) balanced color signals Analog Digital Conversion The analog color signals must pass through an Analog/Digit a l conversion ci rcuit prior to any digital pr o cessing in the PMP . A typical ADC ...

  • Barco HDX W12 - page 119

    9. Image A B Image 9-32 White balance : In the projector , we will set the contrast f or each color until we get a 100% light o utput pic t ure when projecting a 100% white image (image A) Black balance : In the projector , we w il l set the brightness for each color until we get a 0% light output pictur e w hen projecting a 100% black image (image ...

  • Barco HDX W12 - page 120

    9. Image Image 9-36 Image setti ngs, input bal ance Image 9-37 2. Pres s ENTE R to s el e ct. 3. D o you want to use an internally generat ed test pattern ? If yes, use the ▲ or ▼ key to sel ect Adjustment P atter n and pres s ENTE R to toggle between [on] and [of f] If no, adjust o n the selected source. 4. U se the ▲ or ▼ key to se lect R ...

  • Barco HDX W12 - page 121

    9. Image Image 9-40 Image setti ngs, input bal ance Image 9-41 Input balan ce, white balance 3. Pres s ENTE R to s el e ct. 4. D o you want to use an internally generat ed test pattern ? If yes, use the ▲ or ▼ key to sel ect Adjustment P atter n and pres s ENTE R to toggle between [on] and [of f] If no, select a white pattern (or gray scal e as ...

  • Barco HDX W12 - page 122

    9. Image Image 9-42 Main menu, Image Image 9-43 Image adjust ments Image 9-44 Image setti ngs, defaul ts 2. Pres s ENTE R to s el e ct. Ac o n fi rmation me nu is displayed Image 9-45 Default s con fi rma tion 3. U se the ▲ or ▼ key to select Y es and press Ent er to con fi rm. The default settings will be applied for t h e se lected sour c ...

  • Barco HDX W12 - page 123

    9. Image Aspect ratio Description 16:9 Wide screen television for mat / anamorphic format 5:4 Workstation format 2.35 Fil m format 1.88 Digital cinema 2K as pect ratio 1.85 35 mm US and UK wide screen standard fi lm f ormat 1.78 Wide screen television for mat / anamorphic format 1.67 European fi lm ratio (also 1280x768) 16:10 Wide screen cinema f ...

  • Barco HDX W12 - page 124

    9. Image Image 9-49 Aspect rat io 4. Pres s ENT ER to activate. How to set up the c ustom asp ect ratio 1. Wh ile Custom is selected, use t he ▲ or ▼ key to sel ect S etup C usto m and press ENTE R . Image 9-50 Custom aspect rati o Image 9-51 Custom aspect ratio adjust ment The custom a spect ratio setup menu ope ns. 2. U se the ▲ or ▼ key ...

  • Barco HDX W12 - page 125

    9. Image • T otal lines: T otal lines in the source. How to set up 1. Pres s Menu to activate the menus and select Image → Timings . Image 9-52 Main menu, Image Image 9-53 Image, tim i ngs Image 9-54 Ti mings window 2. Pres s ENTE R to s el e ct. 3. U se the ▲ or ▼ key t o s elect a s etting. 4. U se the ◄ or ► key t o change the value ...

  • Barco HDX W12 - page 126

    9. Image Sync pulse Clamp pulse Clamp dela y Clamp wid t h Leading edge Tra iling ing ed ge Image 9-55 How to change the clamp delay - clamp width 1. Pres s Menu to activat e the menus and select Image → Timings → Advanced settings . Image 9-56 Main menu, Image Image 9-57 Image, tim i ngs Image 9-58 Ti mings, advanc ed setti ngs 2. Pres s ENTE ...

  • Barco HDX W12 - page 127

    9. Image 3. U se the ▲ or ▼ key to select Clamp Delay or Clamp Width and use t he ◄ or ► key to change t he value. Or , pre ss ENTE R to open t he speci fi c adj u stment menu. Follow the adjustment method as described in "Navigation and adjust- ments", page 72. 9.6 Image File Services 9.6.1 Files and fi le manipulations Connect ...

  • Barco HDX W12 - page 128

    9. Image Depending on the File Load Filter s etting a full list or a list fi tting the selected source is displayed. When staying for at least 3 seconds on t he sam e fi le selection aft er scrolling through the li st of image fi les a pre- load is started. Image 9-63 Load fi le 3. U se the ▲ or ▼ key to select the desired fi le and press ...

  • Barco HDX W12 - page 129

    9. Image Image 9-66 File loa d fi lter 2. Pres s ENTE R to toggle between [All] and [Fit] . 9.6. 4 Delet e a fi le What can be done ? A custom image fi le can be deleted. Be aware that an active fi le can’t be deleted. How to delete 1. Pres s Menu to activat e the menus and select Image → Image File Services → Delete . Image 9-67 Main men ...

  • Barco HDX W12 - page 130

    9. Image Image 9-70 Delete custom fi le 4. Pres s ENTER to delete t he selected fi le. No recovery possible ! 9.6. 5 Delet e all cust om fi les What can be done ? All custom image fi les can be deleted by executing a single command. Be aware that an active fi le can’t be deleted. Im age fi les o f act ive sources o n i nput 1 t o 4 cannot b ...

  • Barco HDX W12 - page 131

    9. Image Image 9-74 Delete all 3. If Ye s is selected, press ENTER to delete all custom fi les. If No is selected, press ENTER to retur n to the Image File Services menu without deleting any custom fi le. No recovery possible ! 9.6.6 Rename cu stom fi les A rena me operat ion is onl y applicab le for custom i mage fi les. How to rename 1. Pres ...

  • Barco HDX W12 - page 132

    9. Image The available custom fi les are displayed. If no custom fi les are available, a message that no custom fi les are available is displayed. Image 9-78 Renam e, list of fi les 3. U se the ▲ or ▼ k ey t o sele ct the fi le to rename and press ENTE R . The rename window opens. Image 9-79 Rename fi le 4. U se the ▲ or ▼ key to chan ...

  • Barco HDX W12 - page 133

    9. Image Image 9-82 Image fi le services, copy 2. Pres s ENTE R to s el e ct. The available custom fi les are displayed. Image 9-83 Copy fi les, list If no custom fi les are available, a message that no custom fi les are available is displayed. Image 9-84 No custom fi les 3. U se the ▲ or ▼ k ey to select the fi le to copy and press EN T ...

  • Barco HDX W12 - page 134

    9. Image 9.6.8 Image fi le service options, Loa d fi le How to set 1. Pres s Men u to activate the m enus and select Image → Image File Services → Options → Load File . Image 9-86 Main menu, Image Image 9-87 Image, image fi le service s Image 9-88 Image fi le ser vices, Option s Image 9-89 File option s, Load fi le 2. Pres s ENTE R to to ...

  • Barco HDX W12 - page 135

    9. Image Image 9-92 Image fi le ser vices, Option s Image 9-93 File opt ions, Aut o Pictur e Alignment 2. Pres s ENTER to toggle between [Off] , [Always] or [Load F ile] . - Off : auto picture alignment deactivated. - Always : auto picture alignment i s always activated. - Load fi le: when new fi le is loaded for the selected source. 9.7 Save cu ...

  • Barco HDX W12 - page 136

    9. Image 9.8 Splash image About a splash image When splash image is on, a dedicated image is displayed aft er start up and before the normal image is displayed and that for a certain time. A splash image can be uploaded via Projector T oolset. F or more inf or mation about u pl oading a splash image, consult Projector T oolset’s user guide. Enabl ...

  • Barco HDX W12 - page 137

    9. Image Image 9-102 Splash screen , time-out 3. Pres s ENTER to open the edit mode. Enter the time with 2 digits, e.g. 05 or 15. Note: Maximum timeout = 15 seconds. Image 9-103 T i me-o ut, input R5905032 HDX SERIES 05/12/2014 133 ...

  • Barco HDX W12 - page 138

    9. Image 134 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 139

    10. Layou t 10. LA YOUT Overview • Layout m enu overview • Introduction • Ma in window • PiP w indow • Layou t File Service s • Lens behavior 10.1 Layout menu overview Overview t able Level 1 L evel 2 Level 3 Level 4 Layout Main W indow Source Size Position Pip Window Pip Window [On], [O f f] Source Size Position Layout File Services Lo ...

  • Barco HDX W12 - page 140

    10. Layou t 10.3 Main window Overview • Ma in window source selection • Ma in window size • Ma in window position When starting the M ain window settings, the system will ask to create a custom layout 10.3.1 Main wi ndow source selection How to select 1. Pres s Men u to activate the menus and select Layout → M ain window → Source . Image ...

  • Barco HDX W12 - page 141

    10. Layou t Image 10-5 Size adjust ment main window A widt h adjustment B height adj ustment The size can be changed with respect t o the original aspect rat io by checking the check box in front of Lock . How to change the size 1. Pres s Men u to activate the menus and s elect Layout → Main window → Size . Image 10-6 Main me nu, layou t Image ...

  • Barco HDX W12 - page 142

    10. Layou t The Size window opens. Image 10-9 Size window 3. T o keep the cur rent aspect ratio, press ENTER to check Lock . Once Lock is checked, the width and the height will follow each other when changing one of the dimen sions. 4. U se the ▲ or ▼ key to change the height and the ◄ or ► key to change the width. 5. Whe n the desired size ...

  • Barco HDX W12 - page 143

    10. Layou t Image 10-12 Main me nu, layou t Image 10-13 Layout, main win dow Image 10-14 Main window , Position 2. Pres s ENTE R to s el e ct. The Pos iti on window opens . Image 10-15 Positi on window 3. U se the ▲ or ▼ key t o change the To p position and the ◄ or ► key to change the Left posit ion. 4. Whe n desired position is reached, p ...

  • Barco HDX W12 - page 144

    10. Layou t When starting the PiP window settings, t h e system will ask t o create a custom layout 10.4.1 Introduction to PIP PiP PiP stands for "Pictur e in Picture" and allows to displa y multiple windows containing each of them a n image. Th e windows may be of t he video or data type. What are the different pos sibilities within the ...

  • Barco HDX W12 - page 145

    10. Layou t Image 10-20 PiP window , activation 2. Pres s ENTE R to toggle between [On] or [Off] . 10.4.3 PiP window, source selection How to select 1. Pres s Men u to activate the menus and select Layout → PiP window → Source . Image 10-21 Main me nu, layou t Image 10-22 Layout, Pi P Window Image 10-23 PiP window , source selection 2. Pres s E ...

  • Barco HDX W12 - page 146

    10. Layou t 10.4.4 PiP window, Size What can be done? The width and height of the picture in picture window can be changed till the desired dimensions are obtained. Image 10-25 Size PIP window AW i d t h P I P w i n d o w B Height P IP window The size of the picture in picture window can be changed with respect to the original aspect ratio of t he ...

  • Barco HDX W12 - page 147

    10. Layou t Image 10-29 PiP w indow, size 2. Pres s ENTE R to s el e ct. The Size window opens. Image 10-30 PiP window , resize 3. T o keep the cur rent aspect ratio, press ENTER to check Lock . Once Lock is checked, the width and the height will follow each other when changing one of the dimen sions. 4. U se the ▲ or ▼ key to change the height ...

  • Barco HDX W12 - page 148

    10. Layou t Image 10-32 Main me nu, layou t Image 10-33 Layout, Pi P window Image 10-34 PiP window , position 2. Pres s ENTE R to s el e ct. The Pos iti on window opens . Image 10-35 Positi on window 3. U se the ▲ or ▼ key t o change the To p position and the ◄ or ► key to change the Left posit ion. 4. Whe n desired position is reached, pre ...

  • Barco HDX W12 - page 149

    10. Layou t 10.5 Layout File Services Overview • Load layout fi le • Renam e layout fi le • Delete layout fi le • Delete a ll layout fi les • Copy or Save as layout fi le 10.5.1 Load layout fi le When loading a layout that r equires two sources, the PiP window On/Off sett ing will be sw itched to On. How to load fi le 1. Pres s Men ...

  • Barco HDX W12 - page 150

    10. Layou t Image 10-40 Load layou t fi le lis t 3. U se the ▲ or ▼ key to select the desired fi le and press ENTER to activ ate . The radio button in front of the selected fi le is checked. 10.5.2 Rename layout fi le Only custom created layouts can b e renamed. How to rename 1. Pres s Menu to activ ate the menus and select Layout → Layou ...

  • Barco HDX W12 - page 151

    10. Layou t The Rename layout window opens with all available custom l ayouts. Image 10-44 3. U se the ▲ or ▼ k ey to select the desir ed custom fi le and p ress ENTE R to start t he renam ing. The Rename window opens. Image 10-45 Rename layout 4. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select anot ...

  • Barco HDX W12 - page 152

    10. Layou t The Delete layout window opens with all available custom l ayouts. If no custom layout fi les are available, a message that no c ustom layout fi les are available is displayed. Image 10-49 3. U se the ▲ or ▼ key to select the desired custom fi le and press ENTE R to delete. Ac o n fi rmation window is displayed. Image 10-50 4. U ...

  • Barco HDX W12 - page 153

    10. Layou t The Delete all con fi rm window opens. If no custom fi les are available, a message that no custom fi les are available is displayed. Image 10-54 Layout fi les , delete all con fi rmat ion 3. U se the ▲ or ▼ key to s elect Ye s .P r e s s ENTER t o delete all layout fi les. 10.5.5 Copy or Save as l ayout fi le What can be don ...

  • Barco HDX W12 - page 154

    10. Layou t Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca l keypad. When a digit is entered in that way , the next character will be selected automaticall y . Arrow key left ( ◄ ) has the backspace functionality . 10.6 Lens behavior What can be done ? Diffe ...

  • Barco HDX W12 - page 155

    10. Layou t Before diff e rent zoom/focus/shift s etting can be used, the l e ns should be calibrated. W hen a lens change has taken place, always calibrate the lens befor e using this setting. 5. If you have to calibrate the lens, select Ye s and press ENTER to start the calibration. During the calibration, a message is displayed. Th is message di ...

  • Barco HDX W12 - page 156

    10. Layou t 152 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 157

    11. Lamp 11 . L A M P Overview • Lam p menu overview • Lam p power mode • Hush Kit activate/deactivate • Lam p power • Auto dimm ing when on Pause • Auto dimm ing when No Signal • Auto dimming when O ver-temperature • CLO mode (Con stant li ght output mode) • CLO targets • LPS power • Lam p identi fi cation • Z-axis adjustm ...

  • Barco HDX W12 - page 158

    11. Lam p Image 1 1-1 Main me nu, lamp Image 1 1-2 Lamp, power Image 1 1-3 2. Pres s ENTE R to toggle between [Normal] , [Economic] and [Long Life] . 1 1.3 Hush Kit acti vate/d eactiv ate What can be done? Activating the Hush Kit m ode makes the projector more quiet. For that the Hush Kit must be installed (adapted projector front cover and rear co ...

  • Barco HDX W12 - page 159

    11. Lamp Image 1 1-6 Hush K it installe d? 2. Pres s ENTE R to toggle between [Y es] and [No] . 3. If selected [Yes] , a popup window will a ppear to con fi rm that a Hush Kit is physically inst a lled. Press YES if this is the case. NO if not. Image 1 1-7 Con fi rm Hush Kit physical installa tion. If the H ush Kit feature is activated and the pr ...

  • Barco HDX W12 - page 160

    11. Lam p Image 1 1-8 Main me nu, lamp Image 1 1-9 Lamp, power Image 1 1-10 Lamp power adjustment 2. U se the ◄ or ► key to change the power value. The value can be changed between 75 and 100% 1 1.5 Auto dimming when on Pause About auto dimming when o n pause When the projector is switched to pause, the shutter is closed but t he lamp is still ...

  • Barco HDX W12 - page 161

    11. Lamp Image 1 1-13 Auto dimmi ng when Pause 2. Pres s ENTE R to toggle between [On] or [Off] . [On] : when switched to pause, lamp power will be reduced. [Off] : when switched to pause, power remains on its original value. 1 1.6 Auto dimming when No Signal About auto dimming When no s ignal is detected on the selected input the lam p power will ...

  • Barco HDX W12 - page 162

    11. Lam p Image 1 1-16 Auto dimmin g no signal 2. Pres s ENTE R to toggle between [On] or [Off] . [On] : when no signal, auto dimming is started. [Off] : when no signal, no auto dimming is s tarted. 1 1 .7 Auto dimming when Over-temperature What can happen? When an over-temperature is detected, the projector st arts dimming the lamp so that the pro ...

  • Barco HDX W12 - page 163

    11. Lamp Image 1 1-19 Auto dimmi ng over-t em peratur e 2. Pres s ENTE R to toggle between [On] or [Off] . [On] : when temperature is to high, auto dimming is start ed. [Off] : when temperature is to high, no auto dimming is started. 1 1 .8 CLO mode ( Constant light output mode) What can be done? Constant Light Output allows to force a constant lig ...

  • Barco HDX W12 - page 164

    11. Lam p 100 20 40 60 80 200 400 600 800 1000 Relative Light Output (%) Runtime (hrs) Constant Light Output working area Image 1 1-21 CLO mode setting On overrules the lam p power mode setting. Projector will always play in CLO mod e using the CL O targe t. How to switch CLO mode 1. Pres s Men u to activate the menus and s elect Lamp → Power → ...

  • Barco HDX W12 - page 165

    11. Lamp 11 . 9 C L O t a r g e t s What must be done? The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to On. How to set the target 1. Pres s Men u to activate the menus and s elect Lamp → Power → CLO mode . Image 1 1-25 Main me nu, lamp Imag e 1 1- 26 Lamp, power Ima ...

  • Barco HDX W12 - page 166

    11. Lam p Image 1 1-28 LPS power 1 1 .1 1 Lamp identi fi ca tion About The lamp identi fi cation menu gives an overview of the most important parameters of the used lamp. These parameters are: • Serial number of the lam p • Article number o f the lamp • Run time since fi rs t start up o f the lam p • Rem aining run time for a safe operat ...

  • Barco HDX W12 - page 167

    11. Lamp Image 1 1-31 Lam p ident i fi cation 1 1 . 1 2Z - a x i sa d j u s t m e n t What can be done? The Z-Axi s m enu item gives the current light output of the projector (i n percentage). This light output indication can be used to readjust the lamp position in the lamp casing (also called Z-ax is adjustment of the lamp). With higher run time ...

  • Barco HDX W12 - page 168

    11. Lam p 164 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 169

    12. Al ignment 12. ALIG NMENT Overview • Alignm ent menu overview • Orientation • Lens a djust ment, zoom - focus • Lens adjustment, shift • Lens a djust ment, m id posit ion • Calbrate lens at startup • Calibrate lens • W arping • Blanking adjustmen t • Contrast-Intensi ty • Gamma • Internal patterns • Color space • Sce ...

  • Barco HDX W12 - page 170

    12. Ali gnment Projector EBU SMPTE Custom Custom2 ScenergiX Status White level Black level ScenergiX pattern Adjust lines Reset 3D Glasses Dark T im e Adjustment Actual Dark T ime L/R Output Reference Delay 3D Sync Loop Th rough 12.2 Orientati o n What can be done? The way of physical installation of the projector can be de fi ned to the projector ...

  • Barco HDX W12 - page 171

    12. Al ignment Image 12-3 Orienta tion list 12.3 Lens adjustment, zoom - focus Zoom/Focus adjustment 1. Pres s Menu to activate the menu s and select Alignment → Lens . Image 12-4 Main menu, alignmen t Image 12-5 Alignme nt, lens 2. U se the ▲ or ▼ k ey to select zoom/focus and press EN TER to activ ate. Image 12-6 Lens, Zoom/ Focus 3. U se t ...

  • Barco HDX W12 - page 172

    12. Ali gnment Image 12-7 Zoom/Focus adj ustment 12.4 Lens adjustment, shift How to shift le ns 1. Pres s Menu to activate the menu s and select Alignment → Lens . Image 12-8 Main menu, alignmen t Image 12-9 Alignme nt, lens 2. U se the ▲ or ▼ k ey to select Shift and press ENTE R t o ac tiva te. Image 12-10 Lens, shi ft 3. U se the ▲ or ? ...

  • Barco HDX W12 - page 173

    12. Al ignment Image 12-1 1 Shift ad justment 12.5 Lens adjustment, mid position H o wt or e t u r nt om i dp o s i t i o n 1. Pres s Menu to activate the menu s and select Alignment → Lens . Image 12-12 Main menu, alignmen t Image 12-13 Alignme nt, lens 2. U se the ▲ or ▼ key to select Mid Position and p ress ENTER t o acti va te. Image 12-1 ...

  • Barco HDX W12 - page 174

    12. Ali gnment 12.6 Calbrate lens at startup About calibrating lens Each time the projector is start ed, a homing procedure (calibration) can be executed so that the projector exactly k nows the lens position. How to calibrate 1. Pres s Menu to activate the menu s and select Alignment → Lens . Image 12-15 Main menu, alignmen t Image 12-16 Alignme ...

  • Barco HDX W12 - page 175

    12. Al ignment Image 12-18 Main menu, alignmen t Image 12-19 Alignme nt, lens 2. U se the ▲ or ▼ key to s elect Calibrate lens and press ENTE R to activate. Image 12-20 Calibrat e lens A Lens Calibration window opens. Select fi rst the desired calibration options by checking t he check box before the option and then se lect Ye s to start the c ...

  • Barco HDX W12 - page 176

    12. Ali gnment Overview • Abo ut warping • Warp activation - deactivation • Start up m anual adjustment • Warp adjustment principle • Setting the warping level • Warp adaptation steps • Ma king selections and adjus tments • Keystone correction work fl ow • Linearity adjustment, w ork fl ow • Selecting and changing the pos i ti ...

  • Barco HDX W12 - page 177

    12. Al ignment How to acti vate - deact ivate 1. Pres s Menu to acti vate the menus and select Alignment → Warp ing → . Warp st atus . Image 12-24 Main menu, alignmen t Image 12-25 Alignm ent, Warping Image 12-26 Warping status 2. Pres s ENTE R to toggle between [O n] and [Off ]. [On]: wa rp functionalit y is activated. [Off]: warp functionalit ...

  • Barco HDX W12 - page 178

    12. Ali gnment Image 12-27 Main menu, alignmen t Image 12-28 Alignm ent, Warping Image 12-29 Warpi ng, Warp adjust Image 12-30 War p a re a W arp adjust me nu, general icons 1 2 3 4 5 6 7 Image 12-31 1 Undo / r edo icon 2 Grid initialization (reset grid to or iginal) 3 Increase the number of points. The current number of points (m ode) is indicated ...

  • Barco HDX W12 - page 179

    12. Al ignment The us e of warping adjust ment l eads to ima ge quali ty loss! The more geomet ry adjustme nt is appl ied, the more qual ity loss. Moving an anchor point causes pixels in the same region to be mov ed gradually with this one pixel, depending on their distance to it. The size of the region of impact d epends on the anchor point: some ...

  • Barco HDX W12 - page 180

    12. Ali gnment 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 0 2 1 34 6 5 78 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 24 26 25 27 28 30 29 31 32 1 1 2 4 4 7 7 7 7 16 16 16 16 16 16 11 11 16 16 16 16 11 11 16 16 16 16 16 16 11 11 11 11 1 2 4 4 7 7 7 16 16 16 16 16 11 11 11 11 11 11 16 16 16 16 16 16 16 1 ...

  • Barco HDX W12 - page 181

    12. Al ignment 12.8.5 Setting the warping level How to select 1. With the Warping menu displayed, use the ▲ or ▼ key to select more or less pixels to adjust. Switching between the more or less pixels icon can be done w ith the ◄ or ► key . 1 2 Image 12-37 Warp l evel selection 1 Increment pixel s 2 Decrement pixles The cu rrent selected ico ...

  • Barco HDX W12 - page 182

    12. Ali gnment Image 12-38 Warp adap tation steps The following selection is possible: - 100 pixels -1 0 p i x e l s -1 p i x e l -C u s t o m 3. Pres s ENTER to accept the selecti on. When Custom is selected, the step value can be changed. How to change the custom step value 1. U se the ▲ or ▼ k ey to select Custom steps . 2. U se the ◄ or ? ...

  • Barco HDX W12 - page 183

    12. Al ignment 4. T o adjust a value once selected, use the ◄ or ► key to change Or , pre ss ENTER to open a s eparate adjustment window . Use the arrow keys to make the adjustment. Image 12-40 Warp ing, keystone About W arp area 2 1 3 4 5 6 Image 12-41 Warp area 1 Full screen 2 Right side 3B o t t o m s i d e 4 Left side 5 To p s i d e 6 4 qua ...

  • Barco HDX W12 - page 184

    12. Ali gnment Or , pre ss ENTE R when an item is selected and use the 4 ar r ow keys t o adjust. Image 12-43 Warp ing, keystone 5. M ove the c orner points t o the desired position. Image 12-44 Keyston e adjust m ent 12.8.9 Linearity adjustment, work fl ow Adjusting vertical and horizontal linearity 1. Select the 2 x 2 adjustment level. See " ...

  • Barco HDX W12 - page 185

    12. Al ignment 12.8.10 Selecting and changing the position of a speci fi cp o i n t About point selection Depending on the warp level, number of s electable points, a speci fi c point c an be selected and moved in any directi on. The coordi- nate system works with 33 x 33 pixels ( 0 to 32). De pending on t h e war p level the cursor will jump fr ...

  • Barco HDX W12 - page 186

    12. Ali gnment Depending on the selected area only the points in that area will be adjusted and the scale direction changes according the sele cti on. 3. S elect Scale . 4. Select within Warp Adaptations , an av ailable adjustment to scale the image. Or , pre ss ENTE R when an item is selected and use the 4 ar r ow keys t o adjust. Image 12-49 Warp ...

  • Barco HDX W12 - page 187

    12. Al ignment Image 12-51 Rotation Selecting ro tation poin t 1. S elect full image as warp area (1). 1 2 3 Image 12-52 Rotati on point, se l ect ion 2. U se the arrow keys to select Rotation point (2). 3. Select Warp Adaptati ons and use the arrow keys to move rotation point to the desir ed position ( 3). Or , pre ss ENTE R when an item is select ...

  • Barco HDX W12 - page 188

    12. Ali gnment 1 2 3 Image 12-54 Rotate image 3. Select Warp adaptation, angle. 4. U se the ◄ or ► key to change the rotation Angle . Or , pre ss ENTER t o open the W arping Adaptations window . Use the ◄ or ► key to change the Angle. Image 12-55 Warp ing adaptation , angle 12.8.14 Har dware Reset What can be done ? During some combinations ...

  • Barco HDX W12 - page 189

    12. Al ignment 1 21 11 6 16 5 3 2 4 25 15 23 13 24 22 10 20 8 18 12 14 7 9 19 17 1 3 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 18 1 18 18 18 1 1 1 18 1 1 18 1 1 1 1 18 1 18 1 1 2 2 12 12 2 1 1 1 1 1 1 1 1 1 7 1 7 1 1 17 17 1 1 1 1 17 17 17 1 1 7 7 1 1 17 7 7 1 1 1 1 1 1 7 1 17 1 1 7 Image 12-57 Opaci ty How to adjust 1. Pres s Men u to activate ...

  • Barco HDX W12 - page 190

    12. Ali gnment 12.8.16 Warp fi le service, load fi le What can be done? A prede fi ned warp con fi guration can be loaded in the warp board as ac tive warp con fi guration fi le. T o exclude the warp functionality , load the fi le NoDi stortion.txt . How to load 1. Pres s Men u to activate the menus and select Alignment → Wa rp ing → . W ...

  • Barco HDX W12 - page 191

    12. Al ignment 12.8.17 Warp fi le se rvice, sa ve to fi le What can be done? The current warp settings are saved in the current active fi le How to save 1. Pres s Men u to activate the m enus and select Alignment → Warp in g → . Warp File Servic e → . Save . Image 12-66 Main menu, alignmen t Image 12-67 Alignm ent, Warping Image 12-68 Warp ...

  • Barco HDX W12 - page 192

    12. Ali gnment Image 12-70 Main menu, alignmen t Image 12-71 Alignm ent, Warping Image 12-72 Warpi ng, fi le servi ce Image 12-73 Save as 2. Pres s ENTE R to open the Enter the name w indow . The current active fi le name is displayed. 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another characte ...

  • Barco HDX W12 - page 193

    12. Al ignment Image 12-74 Main menu, alignmen t Image 12-75 Alignm ent, Warping Image 12-76 Warpi ng, fi le servi ce Image 12-77 Rename warp fi le Image 12-78 Warp fi les Image 12-79 Rename fi le 2. Pres s ENTE R to display the list of warp fi les . 3. U se the ▲ or ▼ key to selec t the fi le to rename. and press ENTER . 4. U se the ▲ ...

  • Barco HDX W12 - page 194

    12. Ali gnment Image 12-80 Main menu, alignmen t Image 12-81 Alignm ent, Warping Image 12-82 Warpi ng, fi le servi ce Image 12-83 Delete warp fi le 2. Pres s ENTER to display the Warp fi le list. Image 12-84 Warp fi les Image 12-85 Con fi rm dele te 3. U se the ▲ or ▼ k ey to select the fi le to delete and press ENT ER . 4. U se the ▲ o ...

  • Barco HDX W12 - page 195

    12. Al ignment Image 12-86 Main menu, alignmen t Image 12-87 Alignm ent, Warping Image 12-88 Warpi ng, fi le servi ce Image 12-89 Delete all Image 12-90 Con fi rm delete 2. Pres s ENTER . 3. U se the ▲ or ▼ key t o Y es or No and press ENTE R . Ye s : fi les will be deleted. No: no fi l es deleted 12.8.22 Warp board rese t What can be done? ...

  • Barco HDX W12 - page 196

    12. Ali gnment Image 12-91 Main menu, alignmen t Image 12-92 Alignm ent, Warping Image 12-93 Warp boar d reset 2. Pres s ENTER to start the board r eset. 12.8.23 Warp board and v alues rese t What can be done? With some extreme warp values the hardware of the warping can get stuck. With only a hard reset of the board, it star ts up with the same ex ...

  • Barco HDX W12 - page 197

    12. Al ignment Image 12-94 Main menu, alignmen t Image 12-95 Alignm ent, Warping Image 12-96 Warp boa rd and values reset 2. Pres s ENTER to reset the board and the current warp values. 12.8.24 Alternative Si de Keystone About the alternative side keystone For 3D sources with a frequency higher than 30 Hz/eye, the warp unit cannot be used any more. ...

  • Barco HDX W12 - page 198

    12. Ali gnment Image 12-97 Main menu, alignmen t Image 12-98 Alignm ent, Warping Image 12-99 Alternati ve side keystone 2. U se the ▲ or ▼ k ey to adjust t he keys tone. 12.9 Blanking adjustment What can be done ? Blanking adjustments affect only the edges of the projected i mage and are used to frame the projected image on to the screen and to ...

  • Barco HDX W12 - page 199

    12. Al ignment Image 12-100 Blanking A T op blanking B Bottom blanking C Left blanki ng D Right blankin g The reset function bri ngs all blanking settings back to zer o. How to adjust 1. Pres s Menu to activat e the menus and select Ali g nment → Blanking . Image 12-101 Main menu, alignmen t Image 12-102 Alignme nt, blan king 2. Pres s ENTE R to ...

  • Barco HDX W12 - page 200

    12. Ali gnment The blanking adjustment menu opens. Image 12-103 Blanking adj ustment 3. U se the ▲ or ▼ key t o s elect the desired blanking adjustment and adjust wit h t he ◄ or ► key . Select Reset to reset all blanking adjustments. 12.10 Contras t -Int ensity Purpos e Contrast : change the contrast of the complete output signal (main and ...

  • Barco HDX W12 - page 201

    12. Al ignment Image 12-107 Intensity 12.1 1 Gamma About Gamma Gamma is an image quality enhancem ent func tion that off ers a richer image by brightening the already darker portions of the image without altering t he brightness of the brighter portions (c ontrast feeling enhanced). How to adjust 1. Pres s Menu to activat e the menus and select Ali ...

  • Barco HDX W12 - page 202

    12. Ali gnment Image 12-1 10 Main menu, alignmen t Image 12-1 1 1 Alignment, intern al patterns 2. Pres s ENTER to select the pattern list. Image 12-1 12 OSD test pat terns 3. U se the ▲ or ▼ key to select a pattern and press ENTER to display that pattern. The following patterns are avai lable: - Checker board -C o l o r B a r s - Convergence - ...

  • Barco HDX W12 - page 203

    12. Al ignment 12.13 Color space Color space A color space or color standard is a mathematical representation for a color . For example the RG B color space is based on a Cartesi an coordinate syst em. What can be adjusted ? The color space (gamut), the collecti o n of colors which can be reproduced by the projector , can be adjusted t o 4 prede ? ...

  • Barco HDX W12 - page 204

    12. Ali gnment Image 12-1 16 4. Whe n [On] is selected and the color temperature is correct, use the ▲ or ▼ key to select the des ired col or space and press ENTER to selec t. Projector Maximum color space EBU European Broadcasting Union. This organization de fi nes a European standard. SMPT E American standard. Custom Custom2 The user can de ...

  • Barco HDX W12 - page 205

    12. Al ignment 2. U se the ▲ or ▼ key t o select a color coordinate. Use t he ◄ or ► key to change the value of the selected coordinate. Adjust all other c oor dinates i n the same way . Select Reset to return to previous saved values. 12.14 Scenergix 12.14.1 Introduction Why Sce nergiX ? When working in a m ultichannel setup the HDX and it ...

  • Barco HDX W12 - page 206

    12. Ali gnment 12.14. 2 Preparatio ns Scenerg i X Prepa rations T o ensure proper ScenergiX adjustment, be sure that the following adj ustments are done perfectly on all projectors: • Convergence • Geometry • Color M atching (Color T emperature, Color S tandard, Input Balance, G amma) 12.14.3 Sc energix act ivation How to activat e 1. Pres s ...

  • Barco HDX W12 - page 207

    12. Al ignment Image 12-124 Main menu, alignmen t Image 12-125 Alignme nt, Scener gix Image 12-126 Scenergix, pat tern activation 2. Pres s ENTE R to toggle between [On] or [Off] . [On] : Internal scenergix pattern is displayed. [Off] : no scenergix pattern i s dis played. 10 50 90 130 170 210 250 290 330 370 10 50 90 130 170 210 250 290 330 370 10 ...

  • Barco HDX W12 - page 208

    12. Ali gnment Adjustment lines can be activated when S cenergix pattern is [O n]. How to display 1. Pres s Menu to acti vate the menus and select Alignment → Scenergix → Adjust lines . Image 12-128 Main menu, alignmen t Image 12-129 Alignme nt, Scener gix Image 12-130 2. Pres s ENTE R to toggle between [On] and [Off] . 12.14.6 Data doubling Ab ...

  • Barco HDX W12 - page 209

    12. Al ignment Pr ojec tor 1 Pr ojec tor 2 Hor . Star t 1 Ve r t . Star t 1&2 Hor . Star t 2 A B Size 1 Size 2 Size V Image 12-131 Data doubli ng AS o u r c e B Proj ected image Activate data doubling on both projectors and setup the vertic al and horizontal start for project or 1 and projector 2. How to setup 1. Pres s Menu to activ ate the me ...

  • Barco HDX W12 - page 210

    12. Ali gnment Image 12-132 Main menu, alignmen t Image 12-133 Alignme nt, Scener gix Image 12-134 Scenergix, data doubli ng Image 12-135 Data doubli ng, status 2. Select Status and press ENTER to toggle between [On] and [Of f] . [On] : data doubling is act ivated. [Off] : data doubling is deactivated. 3. Select Horizontal Start an d use the ◄ or ...

  • Barco HDX W12 - page 211

    12. Al ignment Image 12-136 Main menu, alignmen t Image 12-137 Alignme nt, Scener gix Image 12-138 Scenergix, whi te level 2. Pres s ENT ER to select the White level adjustments. The White level position menu opens. When Adjus tment lines is [On] , the diff er ent areas are displayed on the screen. Image 12-139 White level posi tion 3. U se the ▲ ...

  • Barco HDX W12 - page 212

    12. Ali gnment Image 12-140 Width se lections 4. Set fi r st the width for the fi rst proj ec tor and repeat for the second one. Image 12-141 Wi dth set up for pro jecto r 1 208 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 213

    12. Al ignment Image 12-142 Wi dth set up for pr ojecto r 2 T o eliminate all b lending settings, select Reset and press ENTER. 12.14.8 Blac k level adj ustment Why black le vel adjustment For dark images, the overlap zone will be brighter then the r est of the images. T ypically for DLP projectors, next to the overlap zone, a brighter area is reco ...

  • Barco HDX W12 - page 214

    12. Ali gnment Image 12-144 Main menu, alignmen t Image 12-145 Alignme nt, Scener gix Image 12-146 Scenergix, Black l evel 2. Pres s ENT ER to select the Black Level adjustments. Image 12-147 Black level , area 3. U se the ▲ or ▼ key t o s elect one of t he four size adjustments. Use t he ◄ or ► ke y to move the green border line to the des ...

  • Barco HDX W12 - page 215

    12. Al ignment Image 12-148 DLP leakage ar e a 1 Overlap area 2 DLP Leakage area Use the Reset item to reset all area values. How to adjust 1. Pres s Menu to acti vate the menus and selec t Alignment → Sc energix → Bl ack lev el . Image 12-149 Main menu, alignmen t Image 12-150 Alignme nt, Scener gix R5905032 HDX SERIES 05/12/2014 211 ...

  • Barco HDX W12 - page 216

    12. Ali gnment Image 12-151 Scenergix, Black l evel 2. Pres s ENTER to select and use the ▲ or ▼ key to select a color to adjust or select All colors to adjust all colors at the same time. Image 12-152 Black lev el, adjust 3. Ad just the black level of ar ea A until the black level of area A, B and C are equal. U se the Adjust function Red, Gre ...

  • Barco HDX W12 - page 217

    12. Al ignment How to reset 1. Pres s Men u to activate the menus and select Alignment → Scenergix → Re set . Image 12-154 Main menu, alignmen t Image 12-155 Alignme nt, Scener gix Image 12-156 Scenergix, r eset 2. Pres s ENTE R to reset the Scenergix value. All value are s et back to the default values. 12.15 3D Glass es Overview • Dark time ...

  • Barco HDX W12 - page 218

    12. Ali gnment Left Shutter Open O p e n i n g O p e n i n g C l o s i n g C l o s i n g Close d Right Sh utter Open Close d DL P Mirro rs Active Blanking Ti m e Opening + Closing = Blanking T ime t S t e r e o G l a s s e s Image 12-157 Opening/c losin g times of the shut ters in sync with the blank ing time Closing these shutters too late and/or ...

  • Barco HDX W12 - page 219

    12. Al ignment Left Shutter Open O p e n i n g O p e n i n g C l o s i n g C l o s i n g Close d Right Sh utter Open Close d DL P Mirro rs Active Blanking Ti m e Opening Too Late and/or Cl osing Too Early = Color A rtifacts t S t e r e o G l a s s e s Image 12-159 Shutt ers closing too early and/or op ening too late ca use Color Artifac ts Adjustin ...

  • Barco HDX W12 - page 220

    12. Ali gnment Image 12-162 Dar k time adj ustment 4. U se the ◄ or ► key to change the dark time until the correct value is reached. The actual used dark time is indicated nex t to Actual Dark Time . 12.15.2 Left-right output refere nce delay What can be done? With L/R output reference delay it is possible to apply an adjustable time delay on ...

  • Barco HDX W12 - page 221

    12. Al ignment Image 12-164 Main window Image 12-165 Alignme nt, 3D glasses 2. Pres s ENTER . 3. U se the ▲ or ▼ key to select L /R Output Reference Delay Image 12-166 Output r eference dellay 4. U se the ◄ or ► key to change the L/R Output Reference Delay value until the correct value is reached. 12.15.3 3D Sync Loop Through What can be do ...

  • Barco HDX W12 - page 222

    12. Ali gnment Image 12-169 3D sync loop th rough 4. Pres s ENTE R to toggle between [On] and [Off] . [On] : 3D SYNC OUT is directly routed from 3D SYNC IN [Off] : the internal 3D sy nc signal is available on 3D SYNC OUT , native or inverted as indicated in t he ‘Invert 3D Sync Out’ sett ing. 218 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 223

    13. Proj ector Control 13. P ROJECT OR CONTROL Overview • Projector Control m enu overview • Individual Projector Address • Projector Common A ddress • Serial Comm unication •N e t w o r k • IR C ontrol switching •D M X • Buttons • Me nu position • Local LCD • Language selection • Scheduler •G S M C o n fi gu ration, ac t ...

  • Barco HDX W12 - page 224

    13. Projec tor Contr ol Shutdown time Buttons Shortcut keys Standby button Menu position Menu position Bar scale pos ition Local LCD B ack light Time out Change Language Scheduler Add ta sk Edit t ask Del ete t ask Scheduler on/off GSM con fi guration PIN c ode SMS subscription 13.2 Individual Projector Address About individual projector address B ...

  • Barco HDX W12 - page 225

    13. Proj ector Control Image 13-4 Proje ctor addre ss, input 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca l keypad. When a digit is entered in that way , the next c har acter will be selected auto ...

  • Barco HDX W12 - page 226

    13. Projec tor Contr ol 13.4 Serial Communicati on Overview • Baud rate setup • Interface Standard 13.4.1 Baud rate setup What can be done ? The baud rate for to establish a serial communication with a computer can be s et. How to set 1. Pres s Men u to activate the m enus and select Projector Control → Serial Communication → Baudrate . Ima ...

  • Barco HDX W12 - page 227

    13. Proj ector Control Image 13-12 Main menu, projector contro l Image 13-13 Projecto r control , serial c ommunicat ion 2. U se the ▲ or ▼ key to select Interf ace Standard . Pres s ENTER to toggle bet w een [RS232] or [RS422] . Image 13-14 Interfa ce standard 13.5 Network About a network connection A network connection can be made via a wired ...

  • Barco HDX W12 - page 228

    13. Projec tor Contr ol IP Internet Protocol. The network layer of TCP/IP . Re quired for communication with the internet. Subnet mask A number that is used to identi fy a su bnetwork so that IP addresses can be shared on a l o cal area network . Default Gateway A router that serves as an entry point into and exit point out of a network. For exampl ...

  • Barco HDX W12 - page 229

    13. Proj ector Control Image 13-17 Wir ed DHC P 2. U se the ▲ or ▼ key to select DHCP under Wired and press ENT ER to toggle between [On ] or [Off] . [On] : DHCP is activated. An automatic IP address is assigned. [Off] : D HCP is deactivated. A fi xed address must be used. 13.5.3 Wired IP address s et up How to set up 1. Pres s Men u to activa ...

  • Barco HDX W12 - page 230

    13. Projec tor Contr ol Image 13-20 2. U se the ▲ or ▼ key to select IP Address under Wired and press ENTER to ac tivate the input box. Image 13-21 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca ...

  • Barco HDX W12 - page 231

    13. Proj ector Control Image 13-22 Main menu, projector contro l Image 13-23 Projecto r control, network Image 13-24 Subnet mask 2. U se the ▲ or ▼ key to select Subnet Mask under Wired and press ENTER t o activat e the input box. Image 13-25 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another ...

  • Barco HDX W12 - page 232

    13. Projec tor Contr ol 13.5.5 Wired def ault gateway set up How to set up 1. Pres s Men u to activate the menus and s elec t Projector Control → Network . Image 13-26 Main menu, projector contro l Image 13-27 Projecto r control, network Image 13-28 Network, defaul t gateway 2. U se the ▲ or ▼ key to select Default Gateway u nder Wired and pr ...

  • Barco HDX W12 - page 233

    13. Proj ector Control Image 13-29 Default Gat eway , input 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca l keypad. When a digit is entered in that way , the next c har acter will be selected autom ...

  • Barco HDX W12 - page 234

    13. Projec tor Contr ol Image 13-32 Network, wireless 2. Pres s ENTE R to s el e ct. Image 13-33 Wireless, status 3. Pres s ENTER to toggle the status between [Of f] and [On] . 13.5.7 Wi reless acce ss points s election an d setup These menu items are only accessible when wireless network status i s set to [on]. Scan for a ccess poin ts 1. S elect ...

  • Barco HDX W12 - page 235

    13. Proj ector Control Image 13-34 Scan access points Image 13-35 Scan access poi nts, results 2. U se the ▲ or ▼ key to select the desired access point and press ENTER to ac tivat e. The security type of the network is indic ated with the radio button in front of Open or WP A/WP A2 . The network name is also indicated next to SSID . Note : WEP ...

  • Barco HDX W12 - page 236

    13. Projec tor Contr ol Image 13-38 Open network con nection 2. Pres s ENTER to activate t h e input fi eld. 3. Enter the pas sphrase. T he input is case sensitive. Pres s ENTER to fi ni sh the input of the passphrase. 4. U se the ▲ or ▼ key to select Apply and press ENTE R to open the network connecti on. An IP address can now be obtained vi ...

  • Barco HDX W12 - page 237

    13. Proj ector Control Image 13-41 Network, wireless Image 13-42 Wireless, DHCP 2. Pres s ENTER to open the Wirel ess menu. 3. U se the ▲ or ▼ key to select DHC P and press ENTE R to toggle between [On] or [O ff] . [On] : W ireless DHCP is activated. An automatic IP address i s as signed. [Off] : Wireless DHCP is deactiv ated. A fi xed address ...

  • Barco HDX W12 - page 238

    13. Projec tor Contr ol Image 13-45 Network, wireless Image 13-46 Network, wireless 2. U se the ▲ or ▼ key to select IP Address and press ENTER to activate the input box. Image 13-47 Wirele ss IP addres s input 3. Pres s ENTER to open the Wirel ess menu. 4. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to se ...

  • Barco HDX W12 - page 239

    13. Proj ector Control Image 13-48 Main menu, projector contro l Image 13-49 Projecto r control, network Image 13-50 Network, wireless Image 13-51 Network, wireless Subnet Mask 2. Pres s ENTER to open the Wirel ess menu. 3. U se the ▲ or ▼ key to select Subnet M ask and press ENTER to activate the input box. R5905032 HDX SERIES 05/12/2014 235 ...

  • Barco HDX W12 - page 240

    13. Projec tor Contr ol Image 13-52 Wirele ss Subnet Mask, input 4. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca l keypad. When a digit is entered in that way , the next c har acter will be selected ...

  • Barco HDX W12 - page 241

    13. Proj ector Control Image 13-55 Network, wireless Image 13-56 Wireless de fault gateway 2. Pres s ENTER to open the Wirel ess menu. 3. U se the ▲ or ▼ key to select Subnet M ask and press ENTER to activate the input box. Image 13-57 Wirele ss defaul t gateway , input 4. U se the ▲ or ▼ key to change the selected character . Use t he ◄ ...

  • Barco HDX W12 - page 242

    13. Projec tor Contr ol Image 13-58 Main menu, projector contro l Image 13-59 Projecto r control, IR contro l Image 13-60 IR control 2. U se the ▲ or ▼ key t o s elect the des ired IR control and pres s ENTER to check chec kbox. Checked : IR receiver is enab led and can receive and process comm ands sent by the remote con trol. Not checked : IR ...

  • Barco HDX W12 - page 243

    13. Proj ector Control How to set the DMX address 1. Pres s Men u to activate the menus and select Projector Control → DMX → A ddress . Image 13-61 Main menu, projector contro l Image 13-62 Projecto r control, DMX Image 13-63 DMX, address 2. Pres s ENTE R to s el e ct. Image 13-64 DMX address 3. U se the ▲ or ▼ key to change the s elected c ...

  • Barco HDX W12 - page 244

    13. Projec tor Contr ol 13.7.2 DMX un iverse What can be done ? Depending on the DMX mode, one DMX universe can contain a di fferent number of projec tors. E.g. DM X mode = basic, the DMX universe can contain up t o 256 projectors Universes are only meaningful for Art-Net applications as only there m ultiple universes can be addressed. How to s et ...

  • Barco HDX W12 - page 245

    13. Proj ector Control Image 13-68 DMX universe 3. U se the ▲ or ▼ key to change the selected character . Use t he ◄ or ► key to select another character . Note: Digits can be entered with the digit keys on the remote control or t he loca l keypad. When a digit is entered in that way , the next c har acter will be selected automatically . 1 ...

  • Barco HDX W12 - page 246

    13. Projec tor Contr ol Image 13-71 DMX mode 2. Pres s ENTER to toggle between [B asic] , [Extended] or [Full] . 13.7.4 Art-Net DM X What can be done ? DMX can be sent via Ethernet to the projector . This function can be enabled or disabled. Art-Net DMX [On] : DM X via Ethernet is enabled. Art-Net DMX [Off] : DMX via Ethernet is disabled. How to to ...

  • Barco HDX W12 - page 247

    13. Proj ector Control Image 13-74 DMX Art-Net activatio n 2. Pres s ENTE R to toggle between [On] and [Off] . 13.7.5 Front XLR output voltage control What can be done ? The output voltage on the front XLR connector can be enabled or disabled. The output voltage level can be set to 0V , 9V , 12V or 24V . DMX Art-Net can also enable the output v o l ...

  • Barco HDX W12 - page 248

    13. Projec tor Contr ol Image 13-77 Front XLR Out put voltage enable 2. Pres s ENTE R to toggle between [On] and [Off] . [On] : Front XLR Output voltage e nabled. [Off] : Front XLR O utput voltage disabled. Outpu t volta ge leve l setup 1. Pres s Menu to activat e the menus and select Projector Control → DMX → Output voltage level . Image 13-78 ...

  • Barco HDX W12 - page 249

    13. Proj ector Control 13.7.6 Monitor What can be done ? If a DMX device is connected, t he se tti ng s per channel c an be displayed in an on screen menu. How to start up the monitoring 1. Pres s Men u to activate the menus and select Projector Control → DMX → Monitor . Image 13-81 Main menu, projector contro l Image 13-82 Projecto r control, ...

  • Barco HDX W12 - page 250

    13. Projec tor Contr ol Image 13-84 DMX ov erview list 13.7.7 DMX Shutdown What can be done? Projector can be forced to go in shutdown after a certain retarding time when no DM X signals are available. How to act ivate/deac tivate 1. Pres s Menu to acti vate the menus and select Projector Control → DMX → Shutdown . Image 13-85 Main menu, projec ...

  • Barco HDX W12 - page 251

    13. Proj ector Control Image 13-87 DMX shutdown 2. Pres s ENTE R to toggle between [On] and [Off] . [On] : projector goes in shutdown after a c ertain retarding time. [Off] : projector does not go in shutdown. 13.7.8 DMX Shutdo wn retardin g time About the shutdown retarding time The retarding time is the time between no DMX is detected and the mom ...

  • Barco HDX W12 - page 252

    13. Projec tor Contr ol Image 13-90 DMX shutdown time 2. Pres s ENTER to toggle between [1] , [3 ] , [5] and [10] minut es. 13.8 Buttons Overview • Standby button • Sho rt cut keys 13.8.1 Standby button What can be done ? When going to standby by pressing the standby button, the following can happen: • Only lamp will be switched off • Lam p ...

  • Barco HDX W12 - page 253

    13. Proj ector Control Image 13-93 Buttons, sta ndby 2. Pres s ENTER to toggle between [Lamp only] and [Lamp and Power] . Lamp only : only lamp wil l be switched off when Standby is pressed. Other electronics remain pow ered. Lamp a nd Power : lamp will be switched off and projector will be powered down. 13.8.2 Short cut keys What can be done? An o ...

  • Barco HDX W12 - page 254

    13. Projec tor Contr ol 13.9 Menu position What is possible? The on screen menu and the bar scale can be positioned on dif ferent places on the screen. The following positions are possible f or both • Right-top • Right-mid • Right-bottom •M i d - t o p • Mid-mid • Mid-bottom • Left-top • Left-mid • Left-bottom How to change the p ...

  • Barco HDX W12 - page 255

    13. Proj ector Control Image 13-101 Main menu, projector contro l Image 13-102 Projecto r control , Local LCD 2. U se the ▲ or ▼ k ey to select Back Light . Image 13-103 Local LCD, back light 3. U se the ◄ or ► k ey to change the ba ck lighting of the local LCD panel. 4. U se the ▲ or ▼ ke y t o sele ct Tim e out . Image 13-104 Local LC ...

  • Barco HDX W12 - page 256

    13. Projec tor Contr ol How to change the language 1. Pres s Menu to acti vate the menus and select Projector Control → Change Language . Image 13-105 Main menu, projector contro l Image 13-106 Projecto r control, change la nguage Image 13-107 Language selec tion 2. U se the ▲ or ▼ key to select the desired language and press ENTE R to ac tiv ...

  • Barco HDX W12 - page 257

    13. Proj ector Control Overview • Add a task to the list •E d i t a t a s k • Delete task • Scheduler , on o r of f 13.12.1 Add a task to the list How to add 1. Pres s Menu to activ ate the menus and select Projector Control → Scheduler → Add task . Image 13-108 Main menu, projector contro l Image 13-109 Projecto r control, schedul er I ...

  • Barco HDX W12 - page 258

    13. Projec tor Contr ol Image 13-1 1 1 Add task, setup Start d ate and tim e 1. Whe n selected, press ENTER to select the da y . 2. U se the ▲ or ▼ key to change the current setting. Use t he ◄ or ► key to j u mp to the nex t part of the date and time s e tti ng. Image 13-1 12 Ti m e se t u p 3. S elect Recur rence and press ENTER ; Use t h ...

  • Barco HDX W12 - page 259

    13. Proj ector Control Recurrence : the time between two starts of the same task. The value can be changed between 1 and 99. 1 Start s every day 2 Starts every 2 days 3 Starts every 3 days ... 7 Starts every week Routine setup, in fi nite loop T o repeat the t ask with a given sequence again and again, check the check box in front of In fi nite . ...

  • Barco HDX W12 - page 260

    13. Projec tor Contr ol The task is added to the list o f tasks. 13.12.2 E dit a task What can be done? An existing task in the list of tasks can be edited and s aved with the same name. How to edit 1. Pres s Menu to activ ate the menus and select Projector Control → Scheduler → Edit task . Image 13-1 16 Main menu, projector contro l Image 13-1 ...

  • Barco HDX W12 - page 261

    13. Proj ector Control The edit task window opens. Image 13-120 Edit task The following items can be changed in the same way as creating a new task. For more info, see "Add a task to the list", page 253: - Date and time - Recurrence -R o u t i n e - Lamp status Changing the name an d applying the task will replace the selected task with t ...

  • Barco HDX W12 - page 262

    13. Projec tor Contr ol Image 13-123 Scheduler , delete tas k 2. Pres s ENTER to open the list of t as ks. Image 13-124 Delete task, kist 3. U se the ▲ or ▼ key t o s elect the task to delete and press ENTER . Ac o n fi rmation window o pens. Image 13-125 4. S elect Yes to delete the task. Sele ct No to return wit hout deleting t he task. 13.1 ...

  • Barco HDX W12 - page 263

    13. Proj ector Control Image 13-128 Scheduler , on or off 2. Pres s ENTE R to toggle between [On] and [Off] On S cheduler will execute the tasks in the lis t. A schedule symbol is added at t he left bottom corner of the local LCD panel ( .) Of f N o tasks are exec uted 13.13 GSM Con fi gurati on, activation Only po ssible when a GSM modu le with S ...

  • Barco HDX W12 - page 264

    13. Projec tor Contr ol Image 13-129 Main menu, projector contro l Image 13-130 Projecto r control , GSM con fi gurati on Image 13-131 GSM con fi gur ation Image 13-132 GSM pincode 2. S elect Pin code and press ENT ER . A PIN code input fi eld appears. Image 13-133 Device con fi guration , PIN code 3. Enter the 4 digit PIN code corresponding wi ...

  • Barco HDX W12 - page 265

    13. Proj ector Control Image 13-135 Main menu, projector contro l Image 13-136 Projecto r control , GSM con fi gurati on Image 13-137 GSM con fi guration , Pin code 2. S elect Pin code with the current fi ll ed out code and press ENTER to clear the current code. Image 13-138 3. S elect OK and press ENTER to con fi gure the software. 4. Proc eed ...

  • Barco HDX W12 - page 266

    13. Projec tor Contr ol Image 13-139 Main menu, projector contro l Image 13-140 Projecto r control , GSM con fi gurati on Image 13-141 SMS subscri ption Image 13-142 Subscriber 2. S elect Subscriber 1 and press ENTE R . Image 13-143 3. Enter the G SM number of Subscriber 1. The GSM num ber m ust be ent ere d wit h the following mask +##XXXYY YYYY ...

  • Barco HDX W12 - page 267

    13. Proj ector Control Image 13-144 Main menu, projector contro l Image 13-145 Projecto r control , GSM con fi gurati on Image 13-146 SMS subscri ption Image 13-147 Subscriber 1 2. Pres s ENTER to open the Edit mode. Clear the current number and pres s ENTER ag ain. 3. S elect OK and press ENTER to con fi gure the software. Subscribe or U nsubscr ...

  • Barco HDX W12 - page 268

    13. Projec tor Contr ol T ol o c kt oas p e c i fi c value a 4 digit code is necessary; These codes can be cr ea ted by the pr ojector owner using Pr ojector T oolset. 13.15.2 Light output con fi guration via OSD me nu What can be done ? The activati on code can be entered by the projector user . This code is validat e d and when val id the maxim ...

  • Barco HDX W12 - page 269

    13. Proj ector Control 13.15.3 C on fi gure projector ’ s light output via SMS Proj ector must be equi pped with t he op tional GSM module. What can be done ? An SMS message with certain structure must be sent to the SIM car d of the project o r . This message will be picked up and dec oded. The projector will be con fi gured according the cont ...

  • Barco HDX W12 - page 270

    13. Projec tor Contr ol 13.16.2 Requ est for informa tion Request for information Via an SMS message sent from any cell phone to the GSM num ber associated with t he projector , projector information can be re- quested. The receiving project or analyses the message. The proje ctor answers with an S MS of m aximum 140 characters containing the proje ...

  • Barco HDX W12 - page 271

    14. Service 14. SER VICE Overview • Service menu overview • Identi fi cat ion • Diagnosis • Internal Service Patterns • Convergence • Factory defaults • US B memory • Rese t Formatter •R e fi ll mode • Save Cus tom Settings • Special HD Cam era mode • Auto Dimm ing when over-temperat ure • Time and Date 14.1 Service menu ...

  • Barco HDX W12 - page 272

    14. Ser vice 14.2 Identi fi cati on What ca n be see n? The identi fi cation screen shows the general information about the projector . The following items will be displayed: • Projector type • Projector address • Software version •C o n fi guration • Baudrate • IP address • MA C address • Status of the on screen text • Serial ...

  • Barco HDX W12 - page 273

    14. Service Image 14-3 Identi fi cati o n 2. U se the ▲ or ▼ key to scroll through the menu. 14.3 Diagnosis What ca n be see n? The diagnosis menu gives the poss ibilit y to get an overview of the working of the projector . Overview • V ersions • Meas ure ments • Logging •B o a r d I d •N o t i fi cation • Tilt sensor 14.3.1 V e r ...

  • Barco HDX W12 - page 274

    14. Ser vice Image 14-4 Main me nu, servi ce Image 14-5 Service, di agnosis Image 14-6 Diagnosis, ve rsions 2. Pres s ENT ER to display an o verview of the versions. Image 14-7 Diagnosi s, versions list 14.3.2 Measu rements About measurements Measurements contains the following parts: 270 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 275

    14. Service • V oltages • T emperatures • Fan speeds All tables are built up in an identical way . The current measured value is surrounded with the low and high error and warning limits. Once one of these values are crossed the threshold an error or warning message is logged or displayed on the local LCD sc reen. How to displ ay an overv iew ...

  • Barco HDX W12 - page 276

    14. Ser vice Image 14-13 Overview temp eratures Image 14-14 Overview fan speed s Image 14-15 Overview miscel laneous items 14.3.3 Logging What can be done? Projector hosts two log fi les: one managed bythe Main c ontroll er and one speci fi c for the Lam p power supply . How to display the logging 1. Pres s Men u to activate the menus and select ...

  • Barco HDX W12 - page 277

    14. Service Image 14-16 Main me nu, servi ce Image 14-17 Service, di agnosis Image 14-18 Diagnosis, l ogging Image 14-19 Logging, mai n control ler 2. U se the ▲ or ▼ key to select Main Controller to get a logging of the main controller or to select Lamp Power Supply to get a logging of the lamp power supply . Image 14-20 Main control ler loggi ...

  • Barco HDX W12 - page 278

    14. Ser vice Image 14-21 Lamp power suppl y logging 14.3.4 Board Id About Board Id The board id window gives an over v iew of the modules with their ar ticle number , serial number , etc. How to g et an over view 1. Pres s Men u to activate the menus and select Serv ic e → Diagnosis → Board Id . Image 14-22 Main me nu, servi ce Image 14-23 Serv ...

  • Barco HDX W12 - page 279

    14. Service Image 14-25 Overvi ew board IDs 14.3.5 Noti fi cati on About noti fi cations Noti fi cat ions are warnings and errors di splayed on the local LCD or on the OSD since power on of the projec tor . Once powered off, the noti fi cation logging is c leared. How to display 1. Pres s Men u to activate the menus and select Serv ice → Diag ...

  • Barco HDX W12 - page 280

    14. Ser vice Image 14-29 Noti fi ca tion over view li st 14.3.6 Tilt sensor What is possible? The built-in til t sensor can be read out to see if the projector is used in an al lowe d position. The status fi eld indicates whether the rotation of t he projector is normal or abnormal. Using a projector with an abnormal rotation c an severely damage ...

  • Barco HDX W12 - page 281

    14. Service Image 14-33 T i lt se nsor output The rotation of the pr ojector is visually displayed. Coordinates of the t ilt sensor and the of fset from the normal position are g iven in the tilt sensor pane. The status pane indicates if the projector is used with an allowed rotat ion. 14.4 Internal Service Patterns How to select 1. Pres s Men u to ...

  • Barco HDX W12 - page 282

    14. Ser vice 2. U se the ▲ or ▼ key to select the desired int e rnal service pattern and press ENTE R to open a selection menu. Input patterns Input items in t he Internal Service Patterns menu are only shown when the corresponding slot contains an input boar d. Image 14-37 Interna l service patte rns, input Press ENTER to display the list of p ...

  • Barco HDX W12 - page 283

    14. Service Osd patter ns Image 14-41 Internal service patterns, OS D Press ENTER to display the list of possi ble patterns. Image 14-42 OSD T est patterns Pmp out patt erns Image 14-43 Internal service patterns, Pm p Out Press ENTER to display the list of possi ble patterns. R5905032 HDX SERIES 05/12/2014 279 ...

  • Barco HDX W12 - page 284

    14. Ser vice Image 14-44 Pmp out test patterns T o change the options for the selec ted pattern, use he ► key to open these options. The num ber of options can change for the diff e rent patter ns. Image 14-45 Pmp out internal serv ice test patte rns options Fib patterns Image 14-46 Internal service patterns, F ib Press ENTER to display the list ...

  • Barco HDX W12 - page 285

    14. Service 14.5 Convergence What can be done? The convergence patterns can be used to c heck the convergence alignment of red, green and blue. If there is a misalignment of at least one 1 pixel, an electronic realignment is possible. Mechanical realignment of the convergence can only be done by a quali fi ed service technician. How to display the ...

  • Barco HDX W12 - page 286

    14. Ser vice Image 14-52 4. U se the ▲ or ▼ key to adjust verti cal and the ◄ or ► key to adjust vertical convergence. Adjust until the crossi ng of the center Green ( Red) convergence pattern coincide with t he diagonal line of the center Blue c on- vergence pattern. 14.6 Facto ry defau lts What can be done? All settings of the pr ojector ...

  • Barco HDX W12 - page 287

    14. Service Image 14-55 Factory defaults, settings By default the following settings are excluded - IP address - Serial settings - DMX s etti ngs - Electronic convergence - Standby settings - Scheduler tasks 2. If you w ant to restore also one of the item s in the list, check the c heck box in front of that item. Sele ct Ye s to restore the fact o ...

  • Barco HDX W12 - page 288

    14. Ser vice Image 14-58 USB memory selectio n 2. S elect Save Custom Settings and press ENT ER to download this s e t. Note: Make sure a formatted USB stick is inserted in the USB connector . When no USB stick is available, a message will be shown: No USB device is found. The name of the custom settings fi les contains the ser i al number of the ...

  • Barco HDX W12 - page 289

    14. Service 14.8 Reset Formatter Why and w hen A reset formatter is necessary when e.g. a color is missing, artifacts are vi sible in the image or image is frozen and the formatter test patterns cannot be displayed. How to reset 1. Pres s Men u to activate the m enus and select Service → Reset Formatter . Image 14-63 Main me nu, servi ce Image 14 ...

  • Barco HDX W12 - page 290

    14. Ser vice Image 14-66 Main me nu, servi ce Image 14-67 Service, re fi ll mode 2. Pres s ENTER to sele ct. U se the ▲ or ▼ key to select Ye s .o r No and press ENTER . Image 14-68 If you want to start the re fi ll mode, select Ye s . If you do not want to start the re fi ll mode, select No . 14.10 Save Custom Setti ngs What can be done ? T ...

  • Barco HDX W12 - page 291

    14. Service Image 14-69 Main me nu, servi ce Image 14-70 Service, save custom settings 2. U se the ▲ or ▼ key to select Ye s and press ENTE R . Image 14-71 Save custom settings, question 14.1 1 Special HD Came ra mode What can be done ? "Special HD Camera mode" enables special sequences for the DMD’s to support speci fi c sources s ...

  • Barco HDX W12 - page 292

    14. Ser vice Image 14-72 Main me nu, servi ce Image 14-73 Service, spec ial HD camera mode 2. Pres s ENTE R to toggle between [On] and [Off] . 14.12 Auto Dimming when ove r-temperature What can happen? When an over-temperature is detected, the projector st arts dimming the lamp so that the projector can cool down. How to acti vate - deact ivate 1. ...

  • Barco HDX W12 - page 293

    14. Service 14.13 T ime and Date How to set 1. Pres s Men u to activate the m enus and select Serv ice → Time and Date . Image 14-76 Main me nu, servi ce Image 14-77 Service, t ime and date Image 14-78 Date and time set up 2. U se the ▲ or ▼ k ey to select Hour , Minute , Day , Month or Year and press EN TER to select. 3. U se the ▲ or ▼ ...

  • Barco HDX W12 - page 294

    14. Ser vice 290 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 295

    15. Mainte nance 15. MAI NTENA NCE About this chapter This chapter contains general maintenance procedures which can be easily perf ormed by the operator of the projector . Overview • Cleaning the lens • Cleaning the exterior of the projector 15.1 Cleaning the lens T o minimize the possibili ty of damage to optical coatings, or scratches to len ...

  • Barco HDX W12 - page 296

    15. Mainte nance 292 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 297

    16. Ser vicing 16. SER VICING About this chapter This chapter contains general servicing procedures like lamp hous e replacement, input unit replacement etc. These pro cedures may only be performed by quali fi ed technical servi ce personnel . Overview • Inserting an input module • Rem oval of the lamp house • Installation of the lamp house ...

  • Barco HDX W12 - page 298

    16. Ser vicing 1 Image 16-2 Fixate i nput 16.2 Removal of the lamp house W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary t ools Flat screwdriver How to remove 1. R emove the lamp cover on the input side, see "Removal of t he lamp cover", page 299. 2. R elease t he 3 spring lock ...

  • Barco HDX W12 - page 299

    16. Ser vicing Image 16-3 Lamp house, captive screws 3. T ake the lamp house by both handles and pull it out. Image 16-4 Lamp house, remov al 16.3 Installation of the lamp house W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary t ools Flat screwdriver R5905032 HDX SERIES 05/12/2014 295 ...

  • Barco HDX W12 - page 300

    16. Ser vicing How to install 1. T ake the lamp house by its handles and gently slide the lamp house into its socket. Note that the compartment is provided with a guide (1) to position the lamp house correctly . 1 2 2 1 6 3 3 2 5 3 4 4 Image 16-5 Insert lamp house 2. Pu sh the l am p house forward until it slides fully into the pr ojector . Positio ...

  • Barco HDX W12 - page 301

    16. Ser vicing How to remove 1. R emove the lens. See "Lens removal", page 30. 2. R emove the rubber dust ring from the lens holder . Image 16-6 Dust ring removal 3. R elease t h e 4 captive screws ( 1). 1 Image 16-7 Front cov er removal 4. T ake of f th e front cover . R5905032 HDX SERIES 05/12/2014 297 ...

  • Barco HDX W12 - page 302

    16. Ser vicing 16.5 Mounting the front cover W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary t ools 7m m fl at s crew driver How to mount 1. Place the front cover with the rubber dust facing the projector on its place. 1 Image 16-8 Mount front c over 2. Se cure the 4 captive screws (1). ...

  • Barco HDX W12 - page 303

    16. Ser vicing Image 16-9 Mount dust ri ng 4. M ount lens again. 16.6 Rem oval o f the la mp co ver W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary t ools 7m m fl at s crew driver How to remove 1. R elease the 6 captive screws. R5905032 HDX SERIES 05/12/2014 299 ...

  • Barco HDX W12 - page 304

    16. Ser vicing 1 1 Image 16-10 Lamp side cover 2. T ake of f the side cover . 16.7 Mounting the lamp cover W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary t ools 7m m fl at s crew driver How to mount 1. Place the front cover on the i s place and secure the 6 captive scr ews. 300 R590503 ...

  • Barco HDX W12 - page 305

    16. Ser vicing 1 1 Image 16-1 1 Lamp side cover 16.8 Replacement of the high density dust fi lt er C AUTION : The high density fi lter must be replaced on a reg ular basis, depending on the environment condi- ti ons of the project or . W ARNING : Switc h off th e projecto r and un plug the power cord before starting the procedure. Necessary p art ...

  • Barco HDX W12 - page 306

    16. Ser vicing Image 16-12 Filt er replac ement 3. T ake out the fi lter and insert a new one. C AUTION : Never clean the fi lter Always replace with a n ew one. 16.9 Remove and clear met a l front fi lter W ARNING : Switc h off the proj ector and unp lug the power cor d befo re startin g the procedu re. Necessary p arts New fi lter when needed ...

  • Barco HDX W12 - page 307

    16. Ser vicing 1 Image 16-13 4. At the same time, take out the fi lter . Clean the dust fi lter 1. R emove most contamination with a vacuum cleaner . 2. Blow r emaining dust away with compressed air in an o ther room or outside. If you cannot clean the fi lter anymore, insert a n ew one. How to install 1. Pull the bottom holder to the front and ...

  • Barco HDX W12 - page 308

    16. Ser vicing 304 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 309

    A. Dimens ions A. DIMENSIONS Overview • Dimen sions of a HDX projector A.1 Dimensions of a HDX projector Overview 725 CG2 373 383 413 475 CG1 CG0 Center of gravity Center of gravity Image A-1 Dimensions , mm Geometrical centre Centre without lens Centre with lens CG0 186.5 170.0 185.0 CG1 237.5 241.0 248.0 CG2 362.5 370.0 330.0 R5905032 HDX SERIE ...

  • Barco HDX W12 - page 310

    A. D imensions 306 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 311

    B. Sp ecificatio ns B. SPECIFICA TIONS B.1 Speci fi cations of the HDX W12 Overview Projec tor type WUXGA 3-chip DLP digital projector T echnol ogy 0.96" DMD x3 Resolution 1, 920 x 1,200 (WUXGA) Light out put 12,000 center lumens / 1 1,000 ANSI lumens Contras t 1,850:1 (standard) / 2,400:1 (high contras t mode) Brig htness un iform ity 90% (s ...

  • Barco HDX W12 - page 312

    B. Spec ific atio ns Po wer consu mption 2,300 W / STBY <8 W Noise level (typi cal at 25°C/77°F) 49 dB (A) Operating temperature 0 ~ 40°C / 32 ~ 104°F operat ion humidi ty no con dens 0-8 0 % Dissipati on BTU max. 7,848 BTU/h Dimensio ns (WxLxH) 475 x 725 x 382 mm (18.70" x 28.54" x 15.03") Weight 50kg (1 10lbs) Shippi ng Dime ...

  • Barco HDX W12 - page 313

    B. Sp ecificatio ns Opti onal Inp uts 5- BNC RG BHV ( RG BS/RGsB, YUV CS /SOY , Com posite video, S-Video); DVI - I (HDC P including analog RGB YUV) + BarcoLink/SD I/HDSDI/dual HDSDI/3G; 3D active input input(HDMI/Displ ayPort) feat. SENSIO 3D Inpu t Reso lutions fr om NTSC up to QX GA (2,048 x 1, 536) Pixel clock 200MHz So ftware tool s Projection ...

  • Barco HDX W12 - page 314

    B. Spec ific atio ns Picture-in-picture T wo sources sim ultaneously Orien tation t able - ceiling - side (portrait)* - vertical * lamp door down/bottom DMX 512 Standard W ARP direct adjust OS D + toolset Integrated web server Ye s CLO (const ant light ou tput) standard 3D active eyewear (optional), passive In fi tec (optional), passive circular ( ...

  • Barco HDX W12 - page 315

    B. Sp ecificatio ns Optical lens shift Ver tical: -30% to +120% / Horizontal: -40% to +40% on zoom lenses (memorized) Color correction P7 Lamps 2.5 kW Xenon Lamp lifetime (typical) 1,000 hours T ransport w ith lamp Ye s Lamp hou se, quick replace Ye s Customer bu lb replace Ye s Lamp warr anty ( fi el d replace/ factory replace) 90 days, 500 hours ...

  • Barco HDX W12 - page 316

    B. Spec ific atio ns B.5 T echnical Regulations Certi fi cate s 10 Image B-1 Rohs RoHS Image B-2 Rohs OK Image B-3 CE mark 312 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 317

    C. Stan dard source fil es C. ST ANDARD SOURCE FILES C.1 T ab le over view Ta b l e o v e r v i e w The following standar d imag e fi l es are pre-programmed in the projector . Name 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 640x350@85 85,079 37,860 31,500 832 640 445 350 640x400@85 85,079 37,860 31,500 832 640 445 400 640x ...

  • Barco HDX W12 - page 318

    C. Sta ndard sour ce file s Name 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 1280x1024@85 85,027 91,149 157,506 1728 128 0 1072 1024 1360x768@60 60,15 47,752 85,500 1792 136 6 798 768 1366x768@60 59,790 47,712 85,500 1792 1366 798 768 1400x1050@50 50,000 54,500 94,618 1736 1400 1090 1050 1400x1050@60 59,979 65,317 121,751 186 ...

  • Barco HDX W12 - page 319

    C. Stan dard source fil es Name 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 hd-1920x1080@30i 60,000 33,750 74,250 2200 192 0 562 540 hd-1920x1080@30p 30,000 33,750 74,250 2200 192 0 1 125 1080 hd-1920x1080@29,97i 59,94 33,716 74,176 2200 1920 56 2 540 hd-1920x1080_2@25i 50,000 31.25 74,250 2376 1920 625 540 hd-1920x1080@50p 5 ...

  • Barco HDX W12 - page 320

    C. Sta ndard sour ce file s 316 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 321

    D. DMX chart D. DMX CHART Overview • DM X chart, Basic • DM X chart, Full • DM X chart, Extended D.1 DMX chart, Basic Overview Chan- nel Funct ion V alue Default Action 0 - 5 Mechanical shutter c losed 1 Intensity 6 - 255 255 Electronic contrast on output 2 Function select 0 - 7 No function 8 - 15 Activate layout 1 (Main f ull screen) (I f he ...

  • Barco HDX W12 - page 322

    D. DMX chart Chan- nel Functi on V alue Defau lt Action 0 - 87 No function 88 - 95 Input 1 (if held for 2 seconds) 96 - 103 Input 2 ( i f held for 2 seconds) 104 - 1 1 1 Input 3 (if held for 2 seconds) 1 12 - 1 19 Input 4 (if held for 2 seconds) 4 Input selection 120 - 255 0 No function 0 - 31 No function 32 - 63 Focus mo tor 64 - 95 Zoom motor 96 ...

  • Barco HDX W12 - page 323

    D. DMX chart Chan- nel Funct ion V al ue Default Actions 0 - 87 No functi on 88 - 95 Input 1 (if held for 2 seconds) 96 - 103 Input 2 (if held for 2 seconds) 104 - 1 1 1 Input 3 (if held for 2 seconds) 1 12 - 1 19 Input 4 (if held for 2 seconds) 4 Input selection 120 - 255 0 No function 0 - 7 No function 8 - 15 Lens shift Right 16 - 23 N o function ...

  • Barco HDX W12 - page 324

    D. DMX chart 320 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 325

    E. Stack ing HDX proj ectors E. ST ACKING H DX PROJECTORS Overview • Mo unt stacking poi nts • Stacking HDX projectors • Aligning stacked HDX projectors E.1 Mount stacking points Necessary t ools A l l e nk e y8m m How to mount 1. Place the fi rst stacking point on a co rner . Image E-1 Stacking poi nts, m ount 2. Turn in the delivered bolt. ...

  • Barco HDX W12 - page 326

    E. St acking H DX pro jectors How to stack 1. M ount stacking points on lower projector . See "Moun t stacking points", page 321. 2. M ount a bot tom carry handle on the upper projector . See "Mounting t he bottom carry handler", page 39. 3. Place the pr oj ector with carry handle on top of the projector with stacking points. Ma ...

  • Barco HDX W12 - page 327

    E. Stack ing HDX proj ectors Image E-4 Securi ty cables, mount 2. M ount the other end of the securit y cable around the carry handle of the top projector and c lasp the safety hook r ound the cable as illustrated. Make sure that the falli ng distance is maximum 20 cm. If necessary , before clasping t he safety hook around t he cable, turn the cabl ...

  • Barco HDX W12 - page 328

    E. St acking H DX pro jectors W ARNING : Never open an interlocking adapter o f a stacked proj ector which is sti ll suspended. First place the stacked projectors on the fl oor . E.3 Aligning stacked HDX projectors Necessary t ools No tools. How to align stacked projec tors 1. M ake sure that the internal hatch patter n projected by the ref eren c ...

  • Barco HDX W12 - page 329

    E. Stack ing HDX proj ectors Inclination Image E-7 Stacked projectors, inclination 5. If necessary , adjust t he skew of the stacked projector with r espect to t he reference projector by tur ning the Hand screw i n or out. The hand s crew is located at smallest side of the carrying handle (front or back). A djust until the outline of the hatch pat ...

  • Barco HDX W12 - page 330

    E. St acking H DX pro jectors Zoom Image E-10 Stacked projector , zoom 8. If necessary , repeat from step 2 until the hatch pattern of the s tacked projector i s p erfectly aligned with the hatch patt ern of the reference projector . In case of a triple stacked table mount projector con fi guration adjust and align fi rst the bo ttomm os t projec ...

  • Barco HDX W12 - page 331

    F. Envir onmental inf ormation F . ENVIRO NMENT AL INFOR MA TION Overview • Dispos al information • Rohs com pliance • Production address • Importers contact information F .1 Disp osa l info rm ation Disposal Information W aste Electrical and Electr onic Eq uipment This symbol on the product indicates that, un der the European Directive 201 ...

  • Barco HDX W12 - page 332

    F. Envir onmental inf ormation T able of toxic and hazardous substances/elements and their content , as required by China’s management methods for controlling pollution by el e ctronic inform ation pr oduc ts 零件 项 目 ( 名称 ) Component name 有毒有害物 质 或元素 Hazardous substances and elements 铅 Pb 汞 Hg 镉 Cd 六 价 铬 C ...

  • Barco HDX W12 - page 333

    F. Envir onmental inf ormation T urkey RoHS co mpliance Türkiye Cumhuriyeti: AEEE Yönetmeli ğ ine Uygundur . [Republic of T urkey: In conformity with the WEEE Regulation] F .3 Production ad dress Factories Barco NV Noordlaan 5, B-8520 Kuurne ( B ELGIUM) Barco Visual (Beijing) Electronics Co. Ltd. 巴可 伟视 (北 京) 电 子有限公司 N ...

  • Barco HDX W12 - page 334

    F. Envir onmental inf ormation 330 R5905032 HDX SERIES 05/12/2014 ...

  • Barco HDX W12 - page 335

    Index INDEX Numerics/ Symbols 3D 93, 96–101, 213, 216–217 3D sync out, inv ert 101, 217 Auto detection 97 Dark time 213 Field dominance 100 Input type 98 Invert 3D sync out 101, 217 Modes 93 Output reference delay 216 Second input 9 9 Status 96 Swapped eyes 100 Swapped fi elds 100 3D input 49 Connectivity 49 3D Input Module 49 5c a b l e c o n ...

  • Barco HDX W12 - page 336

    Index Power net 38 Connections 50, 5 3 Communication 50 Utility-Accessory O utlet 53 Contrast adjustment 106 Contrast enhancement 196 Convergence 281 Cooling liquid circuit warning 9 Cooling requirements 13 Copy custom fi le 128 D Date 289 Set up 289 Default image settings 117 Delete all custom fi l e 126 Delete custom fi le 125 Diagnosis 269– ...

  • Barco HDX W12 - page 337

    Index Delete all fi le 126 Delete custom fi le 125 File load fi lter 124 File manipulations 123 Files 123 Manual load fi le 123 Option auto picture alignment 130 Option load fi le 130 Rename 127 Save custom settings 131 Source timings 120–121 Advanced timings 121 Clamp delay 121 Clamp width 121 Splash image 132 T im ings 120–121 Advanced t ...

  • Barco HDX W12 - page 338

    Index Size 136 Source sele ction 136 Overview 135 PIP 140–143 Activation 140 Position 143 Size 142 Source sele ction 141 PiP window 139 Layout fi le services 145–149 Delete 147, 149 Delete all 148 Load fi le 145 Rename 146 Lens 27, 29–31, 33–34, 167–170, 291 Adjustment 167–170 Calibrate 170 Calibrate lens at startup 170 Mid position 1 ...

  • Barco HDX W12 - page 339

    Index Projector con fi gurations 16–17 Front projection 16 Rear projection 17 Projector control 219–226, 228–23 0, 232–234, 236–238, 240–243, 245–253, 256–259, 261, 263–265 Bar scale position 250 Buttons 248–249 Shortcut keys 249 Standby 248 DMX 238, 240–243, 245–247 Art-Net 242 DMX address 238 DMX universe 2 40–241 Front ...

  • Barco HDX W12 - page 340

    Index Over-temperature 288 Convergence 281 Date 289 Set up 289 Diagnosis 269–270, 272, 274–276 Board Id 274 Logging 272 Measurements 270 Noti fi cation 275 Ti lt s ensor 276 V ersions 269 Factory defaults 282 Identi fi cat ion 268 Internal service patterns 277 Overview 267 Re fi ll mode 285 Reset formatter 285 Save custom settings 286 Specia ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco HDX W12 can be divided into several groups. They are, among others:
- Barco technical drawings
- HDX W12 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco HDX W12
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco HDX W12.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco HDX W12, service manual, brief instructions and user manuals Barco HDX W12. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco HDX W12.

Similar manuals

A complete manual for the device Barco HDX W12, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco HDX W12 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco HDX W12.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco HDX W12 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco HDX W12, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco HDX W12, that we can find in the current document
3. Tips how to use the basic functions of the device Barco HDX W12 - which should help us in our first steps of using Barco HDX W12
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco HDX W12
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco HDX W12 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco HDX W12?

Use the form below

If you did not solve your problem by using a manual Barco HDX W12, ask a question using the form below. If a user had a similar problem with Barco HDX W12 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)