Manual Canon D680

94 pages 1.35 mb
Download

Go to site of 94

Summary
  • Canon D680 - page 1

    F a x G u id e F a x G u id e P le a s e re a d t his g uid e b e fore op e ra t ing t his e q uip me nt . A ft e r y ou fini s h r e a d ing t his g uid e , s t ore it in a s a fe p la c e for fut ure re fe re nc e . E N G ...

  • Canon D680 - page 2

    i Y our machine includes the following documentation. This documentation has been designed so that you can easily use your machine to suit your particular needs. Setting up the machine ...................................... Setting up paper .............................................. Installing the CAPT .......................................... ...

  • Canon D680 - page 3

    ii Super G3 is a phrase used to describe the new generation of fax machines that use ITU-T V .34 standard 33.6 Kbps* modems. Super G3 High Speed Fax machines allow transmission time of approximately 3 seconds* per page which results in reduced telephone line charges. * Approximately 3 seconds per page fax transmission time based on ITU-T No. 1 Char ...

  • Canon D680 - page 4

    iii Contents Chapter 1: Introduction Customer Support ..........................................1-1 Operation Panel .............................................1-1 Standby Display .............................................1-3 Making Connections ......................................1-3 Connecting the T elephone Line and an External Device ..... ...

  • Canon D680 - page 5

    iv Chapter 6: Special Features Special Dialing ...............................................6-1 Dialing Through a Switchboard ...................6-1 Dialing an Overseas Number (With Pauses) ..............................................6-1 Switching T emporarily to T one Dialing .........6-2 Chapter 7: Reports and Lists Summary of Reports and Lis ...

  • Canon D680 - page 6

    v Pre-Installation Requir ements for Canon Facsimile Equipment A. Location Supply a suitable table, cabinet, or desk. See the Reference Guide for the machine’ s dimensions and weight. B. Phone Line Requirements 1. Only a single line, touch-tone or rotary telephone set is to be used. 2. Order an RJ1 1-C modular jack (USOC code), which should be in ...

  • Canon D680 - page 7

    vi In Case of Equipment Malfunction Should any malfunction occur which cannot be corrected by the procedures described in this Fax Guide, disconnect the equipment from the telephone line and unplug the power cord. The telephone line should not be reconnected or the power cord plugged in until the problem is completely resolved. Users should contact ...

  • Canon D680 - page 8

    vii Pre-Installation Requir ements for Canon Facsimile Equipment A. Location Supply a suitable table, cabinet, or desk. See the Reference Guide for the machine’ s dimensions and weight. B. Phone Line Requirements 1. Provide only a single-line to touch-tone or rotary telephone set terminated with a standard 4-pin modular phone plug. (T ouch-tone i ...

  • Canon D680 - page 9

    viii • Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority or electrician, as appr opriate. • This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exig ...

  • Canon D680 - page 10

    ix Please read the following list of symbols, terms, and abbreviations used in this guide. • Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly . In order to use the machine safely , always pay attention to these warnings. • Indicates a caution concerning operations that may lead to ...

  • Canon D680 - page 11

    x ...

  • Canon D680 - page 12

    1-1 Introduction 1 Y our machine is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the machine’ s operation, try to solve it by using the information in Chapter 8. If you cannot solve the problem or if you think your machine needs servicing, contact your service representative, → Reference ...

  • Canon D680 - page 13

    1-2 Report Memory Reference F a x Monitor Delayed Transmission Book Sending Clear Delete Space + Function Redial / Pause Coded Dial Directory Receive Mode FAX Resolution One-Touch Speed Dialing Keys The keys marked 01 to 12 can be used to dial fax/telephone numbers pre-registered. To dial using these keys, you need to register the number for one-to ...

  • Canon D680 - page 14

    The standby display differs depending on which mode is selected. When the machine is plugged in, the Copy Mode standby display appears. Y ou can switch from Copy Mode to Fax Mode by pressing FA X . The standby display in Fax Mode is as follows: ■ Fax Mode • The standby display in Copy Mode is, → Reference Guide. Connecting the T elephone Line ...

  • Canon D680 - page 15

    1-4 External Device Connections The external device which you connect to the machine depends on how you want to use the machine. Recommended device connections and receive modes are shown below . • If you have connected an external device to the machine, be sure to select the correct receive mode. ( → p. 5-1) Recommended Device Connections Rece ...

  • Canon D680 - page 16

    2-1 Registering Information 2 T o customize the machine to your particular needs, you can adjust the general operation, sending, receiving, printing, system settings, and speed dialing settings. Y ou can adjust settings directly via the operation panel of the machine. Detailed instructions are described in this guide. When you come to a step that r ...

  • Canon D680 - page 17

    2-2 • The Function key will light up by pressing Function to be able to operate Space , Delete or Clear . ■ Entering Letters ■ Entering Symbols ■ Entering Numbers Correcting a Mistake If you make a mistake while entering letters or numbers, you can delete it by pressing Delete or Clear . ■ T o delete the last letter/number Press Delete on ...

  • Canon D680 - page 18

    2-3 In the United States, FCC rules governing the use of facsimile equipment state that the following sender information must be printed on every facsimile transmission: • Y our fax/telephone number • Y our personal name or company name • The date and time of transmission Y our machine has been designed to print this information at the top of ...

  • Canon D680 - page 19

    2-4 Entering the Date and Time Registering Y our Fax/T elephone Number and Name • The Function key will light up by pressing Function to be able to operate the Space , Delete , Clear or + key . NOTE 1 Press Ad ditional Functions . 2 Use 4 (–) or e (+) to select 5.TIMER SETTINGS . 3 Press Set twice. The date and time currently set for the machin ...

  • Canon D680 - page 20

    2-5 Registering Information 2 5 Press Set . 6 Press Ad ditional Functions . 7 Use 4 (–) or e (+) to select 2.UNIT NAME . 8 Press Set . Ex: 9 Use the numeric keys to enter your name or company name (max. 24 characters, including spaces). Ex: • If you are unsure how to enter characters, → p. 2-1. • If you have already registered your name or ...

  • Canon D680 - page 21

    2-6 Printing a List to Check Information Registered in Y our Machine Y ou can print the USER’S DA T A LIST to check the sender information and current settings of your machine. The sender information is shown at the beginning of the list. The current settings of the machine are listed after this. ***************************** ******************** ...

  • Canon D680 - page 22

    2-7 Before using your machine, you need to make sure it is set for your telephone line type. If you are unsure of your telephone line type, check with your local telephone company . Y our machine is factory-set to operate with a tone line ( TOUCH TONE ). If you need to change the setting, follow this procedure. Setting the T elephone Line T ype Reg ...

  • Canon D680 - page 23

    2-8 ...

  • Canon D680 - page 24

    3-1 Speed Dialing 3 Speed dialing allows you to simplify dialing procedures by registering a fax/telephone number(s) and name under a one-touch speed dialing key or coded speed dialing keys. Y ou can then dial that number by pressing only one or a few keys. Speed Dialing Methods There are three speed dialing methods available with your machine as f ...

  • Canon D680 - page 25

    3-2 • The Function key will light up by pressing Function to be able to operate Space , Delete or Clear . Registering Numbers for One-T ouch Speed Dialing NOTE One-T ouch Speed Dialing 1 Press Ad ditional Functions . 2 Use 4 (–) or e (+) to select 4.ADD. REGISTRATION . 3 Press Set twice. Ex: 4 Use 4 (–) or e (+) to select a one-touch speed di ...

  • Canon D680 - page 26

    3-3 Speed Dialing 3 Changing/Deleting a One-T ouch Speed Dialing Entr y • The Function key will light up by pressing Function to be able to operate Space , Delete or Clear . NOTE 1 Follow steps 1 to 3 of “Registering Numbers for One-T ouch Speed Dialing.” ( → p. 3-2) 2 Use 4 (–) or e (+) to select the one-touch speed dialing key assigned ...

  • Canon D680 - page 27

    3-4 Registering Numbers for Coded Speed Dialing • The Function key will light up by pressing Function to be able to operate Space , Delete or Clear . NOTE Coded Speed Dialing 1 Press Ad ditional Functions . 2 Use 4 (–) or e (+) to select 4.ADD. REGISTRATION . 3 Press Set . 4 Use 4 (–) or e (+) to select 2.CODED SPD DIAL . 5 Press Set . Ex: 6 ...

  • Canon D680 - page 28

    3-5 Speed Dialing 3 Changing/Deleting a Coded Speed Dialing Entry • The Function key will light up by pressing Function to be able to operate Space , Delete or Clear . NOTE 1 Follow steps 1 to 5 of “Registering Numbers for Coded Speed Dialing.” ( → p. 3-4) 2 Use 4 (–) or e (+) to select the coded speed dialing code assigned to the entry y ...

  • Canon D680 - page 29

    3-6 6 Press Function , then Clear to delete the previous entry , then re-enter the name. Ex: • If you do not want to change the name, ignore this step. • If you are unsure how to enter characters, → p. 2-1. 7 Press Set . 8 Press Stop/Reset to return to standby display . ❚ T o Delete a Coded Speed Dialing Entry: 4 Press Function , then Clear ...

  • Canon D680 - page 30

    3-7 Speed Dialing 3 Creating Gr oups • The Function key will light up by pressing Function to be able to operate Clear . NOTE Gr oup Dialing 1 Press Ad ditional Functions . 2 Use 4 (–) or e (+) to select 4.ADD. REGISTRATION . 3 Press Set . 4 Use 4 (–) or e (+) to select 3.GROUP DIAL . 5 Press Set . Ex: 6 Select a one-touch speed dialing key o ...

  • Canon D680 - page 31

    3-8 8 Enter the one-touch and/or coded speed dialing numbers you want to register in the group. • Y ou cannot register numbers in groups that have not been registered for speed dialing. • Y ou can review the numbers registered under the group by pressing 4 (–) or e (+) . If you want to delete one of these numbers fr om the group: Press 4 (– ...

  • Canon D680 - page 32

    3-9 Speed Dialing 3 Y ou can print lists of fax/telephone numbers registered for speed dialing. Keep these lists near your machine so you can refer to them when dialing. Printing Speed Dialing Lists Samples of the lists are shown as follows. ■ 1-T OUCH LIST *********************************** *** *** 1-TOUCH SPD DIAL LIST 12/03/2001 17:02 F AX 12 ...

  • Canon D680 - page 33

    3-10 ■ 1-T OUCH (DET AIL) ■ CODED DIAL LIST 12/03/2001 17:04 F AX 123 4567 CANON 001 ************************************ ************************************ *** *** CODED SPEED DIAL LIST NO. CONNECTION TEL CONNECTION ID [ A 00] 2131 1250 Canon DEUTSCH. [ A 02] 1 49 39 25 25 Canon FRANCE [ A 03] 516p488 6700 Canon U.S.A. [ A 21] GROUP DIAL Can ...

  • Canon D680 - page 34

    3-11 ■ CODED (DET AIL) ■ GROUP DIAL LIST Canceling the Print Out List Y ou can cancel printing lists even after performing the printing procedure. 12/03/2001 17:06 F AX 123 4567 CANON 001 ********************************* ********************************* *** *** GROUP DIAL TEL # LIST [ A 21] Canon GROUP 1 [ A 03] 516p488 6700 Canon U.S.A. [ 01 ...

  • Canon D680 - page 35

    3-12 The password and subaddress is required when you send faxes to the other party’ s fax machine that has a password and subaddress. • Y ou can register the password and subaddress with a one-touch speed dialing key or coded speed dialing code. • Y ou must also know the password and subaddress of the other party’ s fax so that you can ent ...

  • Canon D680 - page 36

    3-13 Speed Dialing 3 16 Enter a password. Ex: • If you do not need to enter a password, ignore this step. • Y ou can enter a password up to 20 digits long using the numeric keys, T , # or Space . • Be sure to enter the password of the other party correctly , taking into account the position of spaces. • If you make a mistake, press 4 (–) ...

  • Canon D680 - page 37

    3-14 ...

  • Canon D680 - page 38

    4-1 Sending Faxes 4 Documents Y ou Can Fax For information on the types of documents you can fax, their requirements, and details on setting up documents, → Reference Guide. Adjusting the Quality of Y our Faxes Canon’ s Ultra High Quality (UHQ™) imaging technology enables you to send documents that have quality similar to the original. The ma ...

  • Canon D680 - page 39

    4-2 Dialing Methods There are several ways of dialing the number of the party to which you want to send a fax. They are as follows: ■ When the fax number is not registered in the machine • Regular Dialing • Redialing ■ When the fax number is registered in the machine • One-T ouch Speed Dialing • Coded Speed Dialing • Group Dialing • ...

  • Canon D680 - page 40

    4-3 One-T ouch Speed Dialing Dial a fax number by pressing the one-touch speed dialing key ( 01 to 12 ) to which the number is assigned. Ex: Ex: • The number registered under that one-touch speed dialing key is displayed. • If you press the wrong key , press Stop/Reset . Then press the correct key . • NO TEL # appears if no fax number is assi ...

  • Canon D680 - page 41

    4-4 Group Dialing Dial the fax numbers of the multiple destinations one at a time. ❚ T o enter a group r egistered under a one-touch speed dialing key: Press the one-touch speed dialing key assigned to the group you wish to fax. ( → p. 4-3) Ex: • The name of the group is displayed. • If you press the wrong key , press Stop/Reset . Then pres ...

  • Canon D680 - page 42

    4-5 Memor y Sending The machine begins calling the other party and transmitting the information after all documents are scanned into the memory . Since the machine is multitasking, you can even scan a document into memory while performing other tasks. The machine has enough memory to store up to approximately 255 pages* (fewer if the document conta ...

  • Canon D680 - page 43

    4-6 ■ Using the platen glass • Y ou need to remove documents from the ADF in advance, in order to fax from the platen glass. • Y ou can operate Book Sending , Delete or Clear when the Function key is lit. If the Function key is not lit, press it. However , you do not need to press Function in step 3 to execute the Book Sending function if BOO ...

  • Canon D680 - page 44

    4-7 Canceling memory sending ■ T o cancel memory sending while documents are being scanned using the ADF ■ T o cancel memory sending after all documents have been scanned Canceling Sending Sending Faxes 4 ❚ While documents are being sent: 1 Press Stop/Reset . • The machine asks you to confirm that you want to cancel. 2 Press 4 (–) to canc ...

  • Canon D680 - page 45

    4-8 There are two methods of redialing: Manual r edialing and Automatic r edialing . This section explains these two methods. Manual Redialing Press Redial/Pause to dial the last number you dialed with the numeric keys. (This starts redialing regardless of whether automatic redialing is enabled.) Canceling Manual Redialing T o cancel manual rediali ...

  • Canon D680 - page 46

    4-9 Sending a Document to More Than One Destination This feature allows you to scan a document once and send it to several destinations. Y ou can send the document to a maximum of 122 destinations using a combination of the following dialing methods: • One-touch speed dialing: up to 12 destinations • Coded speed dialing: up to 100 destinations ...

  • Canon D680 - page 47

    4-10 4 Press Start . • After the scanning is finished, the machine starts to dial the number . • The machine will first send the document to the one-touch speed dialing destinations, then the coded speed dialing destinations, and finally to the destination dialed using regular dialing. • If you prefer the machine never to scan a document auto ...

  • Canon D680 - page 48

    4-11 Y ou can use your machine to send faxes at a preset time. This feature is called Delayed sending or T imer sending . By using this feature, you can take advantage of lower long distance rates at night, for example. Y ou can set up to 122 destinations, and up to 20 reservations of delayed sending. • Y ou can perform other tasks even when you ...

  • Canon D680 - page 49

    4-12 Y ou can check the status of sending or receiving fax, or sending reservation. • Y ou do not need to press Function in step 1 to execute the Fax Monitor function if FAX MONITOR is programmed in PROGRAM 1-TOUCH KEY . ( → p. 9-4) Confir ming T ransmission Status The sending or receiving status can be confirmed using the following method: Con ...

  • Canon D680 - page 50

    4-13 Sending Faxes 4 • If there are no documents stored in memory , the machine will return to standby mode when you select Memory Reference. • Y ou do not need to press Function in step 1 to execute the Memory Reference function if MEMORY REFERENCE is programmed in PROGRAM 1-TOUCH KEY . ( → p. 9-4) Printing a List of Documents in Memory The ...

  • Canon D680 - page 51

    4-14 Resending a Document in Memory Y ou can resend documents that are stored in memory . The machine stores faxes that are received but not printed because paper or toner has run out, a paper jam has occurred, or documents have not been transmitted due to a transmission error . Y ou can send such faxes to another fax machine to be printed. 1 Press ...

  • Canon D680 - page 52

    4-15 Printing a Document in Memory Sending Faxes 4 1 Press Function . 2 Press Memory Reference . 3 Use 4 (–) or e (+) to select 3.PRINT DOCUMENT . 4 Press Set . Ex: 5 Use 4 (–) or e (+) to select the transaction number ( TX/RX NO. ) of the document you want to print. Ex: • Y ou can enter the transaction number using the numeric keys. 6 Press ...

  • Canon D680 - page 53

    4-16 Deleting a Document fr om Memor y 1 Press Function . 2 Press Memory Reference . 3 Use 4 (–) or e (+) to select 5.DELETE DOCUMENT . 4 Press Set . Ex: 5 Use 4 (–) or e (+) to select the transaction number ( TX/RX NO. ) of the document you want to delete. Ex: • Y ou can enter the transaction number using the numeric keys. 6 Press Set . • ...

  • Canon D680 - page 54

    5-1 Receiving Faxes 5 The machine provides you with several modes for receiving faxes. Once you have decided which mode is suitable for your needs, set the mode as described ( → p. 5-2). Y ou can change the mode when the machine is in standby mode. T o determine which mode best suits your requirements, refer to the table below: * Factory default ...

  • Canon D680 - page 55

    5-2 The setting of the receive mode can be changed if necessary . Setting the Receive Mode 1 Press Receive Mode until the mode you want appears. Ex: • Y ou can select from the following: – FaxTel * : when a telephone is connected to the machine, the machine automatically switches between fax calls and voice calls. – FaxOnly : if you use your ...

  • Canon D680 - page 56

    5-3 Setting the Options for FaxT el Mode When selecting FaxT el mode, the following options can be set. • Adjust the time the machine takes to check whether a call is from a fax machine or a telephone ( RING START TIME setting). • Adjust the length of time the machine rings when the call is a voice call ( F/T RING TIME setting). • Set whether ...

  • Canon D680 - page 57

    5-4 1 Press Ad ditional Functions . 2 Use 4 (–) or e (+) to select 3.FAX SETTINGS . 3 Press Set . 4 Use 4 (–) or e (+) to select 4.RX SETTINGS . 5 Press Set . 6 Use 4 (–) or e (+) to select 2.FAX/TEL OPT.SET . 7 Press Set twice. Ex: 8 Use 4 (–) or e (+) to set the time the machine waits before ringing when it receives a call. Ex: • Y ou c ...

  • Canon D680 - page 58

    5-5 Receiving Faxes 5 Setting the Options for Distinctive Ring Pattern Detection Feature: DRPD Some telephone companies offer a Distinctive Ring Pattern (DRP) service whereby they assign two or more telephone numbers with distinctive ring patterns to a single telephone line. If your telephone company offers such a service, you can have both a fax n ...

  • Canon D680 - page 59

    5-6 In Manual mode, if you connect a telephone to your machine, you can receive voice calls as well as manually activate reception of faxes. Y ou can activate reception from the machine or from the telephone connected to the machine (this is called Remote r eceiving ). • For this mode, you need to connect a telephone to your machine. ( → p. 1-4 ...

  • Canon D680 - page 60

    5-7 The polling feature allows you to request a document to be faxed to you from another fax machine. The sender only needs to make sure that the document is on his fax machine and ready to be sent. When this machine polls the sender ’ s machine, the document is sent automatically . • Y ou can register a password and subaddress with a one-touch ...

  • Canon D680 - page 61

    5-8 15 Press Set twice. Ex: 16 Enter a password. Ex: • Y ou can enter a password up to 20 digits long using the numeric keys, T , # or Space . • Be sure to enter the password of the other party correctly , taking into account the position of spaces. • If you make a mistake, press Delete to delete the last number or press Clear to delete all n ...

  • Canon D680 - page 62

    5-9 Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing other tasks. If you receive a fax while you are performing certain tasks, the machine stores the incoming fax in memory . Then, as soon as you finish your task, the machine automatically prints the fax. • If you are copying or printing, p ...

  • Canon D680 - page 63

    5-10 ...

  • Canon D680 - page 64

    6-1 6 Special Features This section explains special dialing features, such as dialing through a switchboard, dialing an overseas number , and switching temporarily to tone dialing. Dialing Thr ough a Switchboard A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switch ...

  • Canon D680 - page 65

    6-2 Switching T emporarily to T one Dialing Many information services for banks, airline reservations, hotel reservations, etc., require tone dialing for their services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily for tone dialing: 1 Press F AX to set to Fax Mode. Ex: 2 Pick up the hands ...

  • Canon D680 - page 66

    7-1 7 Reports and Lists The table below shows the reports and lists that can be printed from your machine. Refer to the pages indicated for more details. • Make sure that L TR or LGL-size paper is loaded in the cassette. If a different paper size is loaded, the report or list cannot be printed. Also, you cannot use the multi-purpose tray for prin ...

  • Canon D680 - page 67

    7-2 The machine is factory-set to automatically print an ACTIVITY REPOR T after every 20 transactions. If you want to print an ACTIVITY REPOR T before it is automatically printed, follow this procedure: • If you prefer the machine not to print an ACTIVITY REPOR T after every 20 transactions, set ACTIVITY REPORT to OFF . ( → p. 9-5) • Y ou do ...

  • Canon D680 - page 68

    7-3 The machine is factory-set to print a TX (transmission) REPOR T only when an error occurs during sending. T o change this setting, → p. 9-5. If you set the machine to print a report, a TX REPOR T or an ERROR TX REPOR T , similar to the ones below , will be printed depending on the setting you select. TRANSMISSION OK TX/RX NO 0003 DESTINA TION ...

  • Canon D680 - page 69

    7-4 MUL TI TX/RX (T ransaction) REPORT If the transmission was a sequential broadcast, a MUL TI TX/RX (transaction) REPOR T , similar to the one below , will be printed. It will also be printed if you select OUTPUT YES under TX REPORT or RX REPORT in the Report Settings ( → p. 9-5). The machine is factory-set not to print an RX (reception) REPOR ...

  • Canon D680 - page 70

    8-1 T roubleshooting 8 The following messages are displayed in the LCD when the machine performs a function or if it encounters an error . This section describes messages related to fax functions. For other messages → Reference Guide. * The identification number does not appear in the standby display . It appears when scanning documents, operatin ...

  • Canon D680 - page 71

    8-2 Sending Problems ❚ Y ou cannot send a fax. The machine may have overheated. • Unplug the machine and let it cool for about 10 minutes. Then plug in the machine and try sending again. The machine may not be set for the type of telephone line in use (pulse/tone). • Make sure the machine is set for the correct telephone line type. ( → p. 2 ...

  • Canon D680 - page 72

    8-3 ❚ Cannot send using Error Corr ection Mode (ECM). The other party’ s fax machine may not support ECM. • If the other party’ s fax machine does not support ECM, then the document is sent in normal mode without error checking. ECM may be disabled. • Make sure ECM is on. ( → p. 9-5) ❚ Errors occur frequently while sending. The teleph ...

  • Canon D680 - page 73

    8-4 ❚ Cannot receive a document manually . Y ou may have disconnected the call by pressing Start or dialing the remote r eceiving ID after hanging up the handset. • Always press Start or dial the remote receiving ID before hanging up the handset. Otherwise you will disconnect the call. • When your telephone line uses rotary pulse, switch to t ...

  • Canon D680 - page 74

    8-5 ❚ Y ou cannot dial. The telephone line may not be connected properly . • Make sure all line connections are secure. ( → p. 1-3) The machine may not be set for the type of telephone line in use (pulse/tone). • Make sure the machine is set for the correct telephone line type. ( → p. 2-7) ❚ The telephone disconnects while you are talki ...

  • Canon D680 - page 75

    8-6 If you have a problem with your machine and you cannot solve it by referring to the information in this chapter and in the Reference Guide, contact your service representative. Canon’ s support personnel are trained in the technical support of Canon’ s products and should be able to help you with your problem. The details on contacting your ...

  • Canon D680 - page 76

    9-1 9 Setting the Additional Functions The menus of the Additional Functions can allow you to specify or register the various settings. A vailable menus differ depending on the machine type. This section explains the procedure to access the menus, and the contents of the menus only related to the fax functions. • For the menus related to the comm ...

  • Canon D680 - page 77

    9-2 Menu Descriptions COMMON SETTINGS DEFAULT SETTINGS Selects which mode standby display appears in the LCD when the power cord is connected, or the AUTO CLEAR function* activates. COPY The copy mode is selected. FAX The fax mode is selected. SW AFTER AUTO CLR Selects whether the machine switches to the mode you set in DEFAULT SETTINGS after the A ...

  • Canon D680 - page 78

    9-3 6.SCANNING END TONE Adjusts the volume of the done tone sounded when the machine has finished scanning. ON 1 to 3 ( 1 ) ERROR ONLY 1 to 3 ( 1 ) OFF The volume is turned off. 7.CALLING VOLUME Adjusts the volume of the ring produced when the unit detects a voice call. 1 to 3 ( 2 ) 8.LINE MONITOR VOL. Adjusts the line monitor volume. ON 1 to 3 ( 2 ...

  • Canon D680 - page 79

    9-4 F AX SETTINGS USER SETTINGS The basic operation settings in the Fax mode can be specified. 1.TEL LINE SETTINGS Specify the telephone line settings. 1.USER TEL NO. Y our telephone and fax number can be registered. ( → p. 2-4) 2.TEL LINE TYPE Selects the telephone line type. ( → p. 2-7) TOUCH TONE The telephone line is set for touch tone dial ...

  • Canon D680 - page 80

    9-5 9 Setting the Additional Functions 6.OFFHOOK ALARM Enables/disables the offhook alarm that alerts you when the handset is not in the handset cradle. ON After reception, the offhook alarm sounds when the handset of extension telephone is left off the hook. OFF No offhook alarm. REPORT SETTINGS Sets the report setting. 1.TX REPORT Enables/disable ...

  • Canon D680 - page 81

    9-6 3.AUTO REDIAL Sets whether to perform automatic redial when the other line is busy or no answer . ON Customizes the redial operation. 1.REDIAL TIMES Sets the number of retries. 1 to 10 TIMES ( 2 TIMES ) 2.REDIAL INTERVAL Sets period of time between redialings. 2 to 99 MIN. ( 2 MIN. ) 3.TX ERROR RESEND Redialing is attempted when a transmission ...

  • Canon D680 - page 82

    9-7 3.DRPD:SELECT FAX Select a ring pattern when the machine receives faxes. ( → p. 5-5) NORMAL RING Ring type of normal telephone line. DOUBLE RING T wo short rings at regular intervals. SHORT-SHORT-LONG Short-short-long at regular intervals. SHORT-LONG-SHORT Short-long-short at regular intervals. OTHER RING TYPE Patterns other than those descri ...

  • Canon D680 - page 83

    9-8 2.TONER SUPPLY LOW Allows you to set whether the machine stores the document in memory when the toner supply is low or ignores the warning and keeps printing until the document is completely printed. This setting is convenient if a new cartridge is not at hand. KEEP PRINTING The keep printing function is turned on. W ith this setting, the machi ...

  • Canon D680 - page 84

    9-9 ADD. REGISTRA TION 1-TOUCH SPD DIAL Registers the informations on One-T ouch Speed Dialing. ( → p. 3-2) 1-TOUCH SPD DIAL Selects a one-touch speed dialing key . 1.TEL NUMBER ENTRY Registers the other party’ s telephone number . 2.NAME Registers the other party’ s name. 3.OPTIONAL SETTING The transmission time and settings including the re ...

  • Canon D680 - page 85

    9-10 CODED SPD DIAL Registers the information on Coded Speed Dialing. ( → p. 3-4) T o register them, perform the same procedure with that of 1-TOUCH SPD DIAL . GROUP DIAL Registers the information on Group Dialing. ( → p. 3-7) 1.TEL NUMBER ENTRY Registers the other party’ s telephone numbers by specifying the One-T ouch Speed Dialing keys or ...

  • Canon D680 - page 86

    A-1 Facsimile ■ Applicable Line Public Switched T elephone Network (PSTN) ■ Compatibility G3 ■ Data Compressing System MH, MR, MMR, JBIG ■ Modem Speed 33.6/31.2/28.8/26.4/24/21.6/19.2/16.8/14.4/12/ 9.6/7.2/4.8/2.4 Kbps Automatic fallback ■ T ransmission Speed Approx. 3 seconds/page* at 33.6 Kbps, ECM-MMR, transmitting from memory * Based ...

  • Canon D680 - page 87

    A-2 ...

  • Canon D680 - page 88

    I-1 I Index Index 4 (–) key ...................................................................1-1 e (+) key ...................................................................1-1 + key ..........................................................................1-2 1-TOUCH SPD DIAL setting ..................................................9-9 1-TOU ...

  • Canon D680 - page 89

    I-2 Dialing coded speed ..............................3-1, 3-4, 3-5, 3-6, 4-3 group ................................................3-1, 3-7, 3-8, 4-4 methods ..................................................................4-2 one-touch speed ...............................3-1, 3-2, 3-3, 4-3 overseas number ....................................... ...

  • Canon D680 - page 90

    I-3 I Index LIST setting 1-TOUCH ............................................................9-10 CODED DIAL .....................................................9-10 GROUP DIAL .....................................................9-10 SPEED DIAL.......................................................9-10 LOCK PHONE setting ......................... ...

  • Canon D680 - page 91

    I-4 Resolution, setting scanning ......................................4-1 RESOLUTION settings .............................................9-8 RING COUNT setting ...............................................9-7 RING ST AR T TIME setting ......................................9-6 ROT AR Y PULSE setting ...................................2-7, 9-4 R ...

  • Canon D680 - page 92

    I-5 SHOR T -LONG-SHOR T setting ................................9-7 SHOR T -SHOR T -LONG setting .................................9-7 Space key ...................................................................1-2 Speed dialing coded................................................3-4, 3-5, 3-6, 4-3 description ..................................... ...

  • Canon D680 - page 93

    I-6 Memo ...

  • Canon D680 - page 94

    120V F A 7 - 3 9 14 - 0 10 © C A N O N I N C . 2 0 02  P R IN T E D IN T H A IL A N D CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, ...

Manufacturer Canon Category Fax Machine

Documents that we receive from a manufacturer of a Canon D680 can be divided into several groups. They are, among others:
- Canon technical drawings
- D680 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon D680
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon D680.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon D680, service manual, brief instructions and user manuals Canon D680. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon D680.

Similar manuals

A complete manual for the device Canon D680, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon D680 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon D680.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon D680 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon D680, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon D680, that we can find in the current document
3. Tips how to use the basic functions of the device Canon D680 - which should help us in our first steps of using Canon D680
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon D680
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon D680 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon D680?

Use the form below

If you did not solve your problem by using a manual Canon D680, ask a question using the form below. If a user had a similar problem with Canon D680 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)