-
Dual XDVDN9131 - page 1
INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with GPS Navigation and 7” Touch Screen Display XDVDN9131 The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake ...
-
Dual XDVDN9131 - page 2
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and ...
-
Dual XDVDN9131 - page 3
2 3 4 5-7 8 9-11 12 13-14 15-17 18-22 23-26 27-30 31 32-38 39-42 43-46 47-50 51-54 55-57 58-63 64 64 65-69 70-75 76 77-78 79 80-82 Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prepa ...
-
Dual XDVDN9131 - page 4
3 Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside th ...
-
Dual XDVDN9131 - page 5
4 XDVDN9131 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVDN9131 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent ...
-
Dual XDVDN9131 - page 6
5 Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 3 transit screws located on top of the ...
-
Dual XDVDN9131 - page 7
6 Wiring Notes: Subwoofer output The SUBWOOFER preamp audio output (Blue RCA) is active in all audio modes. Rear view camera A rear view camera (not included) can be used with the CAMERA input. Refer to page 64 for details. Steering wheel controls (optional) The steering wheel interface input allows connection to the Pacific Accessory Corporation S ...
-
Dual XDVDN9131 - page 8
7 Installation - GPS Antenna & Microphone XDVDN9131 INSTALLATION • Determine a suitable location for mounting the GPS antenna. For optimum reception, the antenna should be mounted in the center of the vehicle roof with a minimum of 6” from any window. The antenna can also be mounted to the rear trunk lid at least 4” from the rear window. ...
-
Dual XDVDN9131 - page 9
8 XDVDN9131 OPERATION Notes: • Remove the battery if the remote will not be used for a month or longer • Remove and dispose of battery properly • Do not store battery with metallic objects or materials Remove battery insulation tape To insert or replace the battery: Remove the battery holder Remove the battery from the battery holder Install ...
-
Dual XDVDN9131 - page 10
9 Bluetooth Microphone Eject Display/Info Secondary LCD Auto Store/Preset Scan Open/Close Monitor Front Panel Release 3.5mm A/V Input USB Input 1 2 3 4 5 6 Stereo indicator Local indicator Main information display Disc-in indicator Bluetooth call indicator Bluetooth connection indicator 1 2 3 4 5 6 7 T alk Band/Play/Pause Channel/Chapter/Track Up/F ...
-
Dual XDVDN9131 - page 11
XDVDN9131 OPERATION 10 Control Functions - Monitor Closed Built-in microphone for Bluetooth hands-free calls. Press once to eject disc. When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track, song or chapter information. Additional LCD for system information while ...
-
Dual XDVDN9131 - page 12
11 Control Functions - Monitor Closed Press MODE to select between Tuner, Disc (which includes DVD and CD playback), operation of iPod, USB, Bluetooth, SD, Auxiliary 1 and Auxiliary 2 inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD or the secondary LCD. Optional iPod device, USB flas ...
-
Dual XDVDN9131 - page 13
XDVDN9131 OPERATION 12 Control Locations and Functions - Monitor Open Close Monitor SD Card Input Screen Angle Up Navigation Screen Angle Down Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Insert SD card to play audio files. Pre ...
-
Dual XDVDN9131 - page 14
13 XDVDN9131 OPERATION Power Navigation Open/Close Mode Volume Up Key #1 Key #2 Key #3 Volume Down Key #4 Key #5 Key #6 Mute/Loudness Key #7 Key #8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Root Repeat Chapter/Track/Seek Tune Down Chapter/Track/Seek Tune Up Fast Reverse/Manual Tune Down Fast Forward/Manual Tune Up Zoom Audio Angle Sub-Title 31 32 33 34 3 ...
-
Dual XDVDN9131 - page 15
XDVDN9131 OPERATION 14 Control Functions - Remote Power Navigation Open Mode Volume Up Keys 0-9 Volume Down Mute Escape Search Audio Select Menu 4-Way-Up/Down/Left/Right Play Band/Stop OK Info Title Menu Root Menu Repeat Chapter/Track/Seek Tune Down Chapter/Track/Seek Tune Up Fast Reverse/Manual Tune Down Fast Forward/Manual Tune Up Zoom Audio Angl ...
-
Dual XDVDN9131 - page 16
XDVDN9131 OPERATION 15 Power On/Off Mute Loudness Mode Optional Mode Selection Volume Audio Setup (from OSD) Audio Setup (from remote) Momentarily press the volume control ( PWR) or any other button (except EJECT ) to turn the unit on. Hold for 3 seconds to turn the unit off. Press MUTE to silence the audio; will appear in the OSD (On Screen Displa ...
-
Dual XDVDN9131 - page 17
XDVDN9131 OPERATION 16 Press INFO momentarily to display DVD disc information. Press and hold to access brightness menu. Press and hold INFO for 3 seconds to change monitor Brightness. Turn the rotary Q or P to adjust to desired level. (0 minimum/20 maximum; 10 is default). When a video source is connected to the front or rear auxiliary inputs, pre ...
-
Dual XDVDN9131 - page 18
XDVDN9131 OPERATION 17 There are two methods to access the MAIN menu: Press • MENU button on the remote control. • Touch MENU or the upper left corner of the touch screen from any mode (except Navigation). Touch to access AM/FM TUNER mode. Touch to access USB mode (optional USB flash drive must be inserted). Touch to access CD/DVD mode ( CD/DVD ...
-
Dual XDVDN9131 - page 19
XDVDN9131 OPERATION 18 Main Setup - Menu L Press • MAIN SETUP icon to access the Main setup mode. Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or • by pressing the RETURN arrow in the top right corner. Press the • PAGE DOWN icon to access Main Setup page 2. MAIN Setup ...
-
Dual XDVDN9131 - page 20
XDVDN9131 OPERATION 19 MAIN Setup Menu matrix - page 2 MAIN Setup Menu matrix - pages 3 - 5 Main Setup - Menu L L Settings Default Options Function Camera Image Normal Normal Normal image Reverse Mirror camera image 180 degrees TFT Auto Open Off On TFT panel will automatically open when ACC is turned on Off TFT panel will not auto open when ACC is ...
-
Dual XDVDN9131 - page 21
XDVDN9131 OPERATION 20 Touch MENU at the top left corner of screen. Touch MAIN SETUP icon. Touch USA . Touch the setting for your region. Touch RETURN to exit. Main Setup - Adjusting Radio Frequency Adjusting Radio Frequency Step 1 Step 2 Step 3 Step 4 Step 5 L 1 L 2 L 3 L L 4 5 ...
-
Dual XDVDN9131 - page 22
XDVDN9131 OPERATION 21 Main Setup - Adjusting the Clock 12Hr Clock Mode Step 1 Step 2 Step 3 Steps 4-6 Touch MENU at the top left corner of screen. Touch MAIN SETUP icon. 3) Touch the current time in the CLOCK row. 4) When keypad appears, enter HOURS , followed by MINUTES . 5) When finished, touch OK . 6) Touch RETURN to exit. For 24Hr format, sele ...
-
Dual XDVDN9131 - page 23
XDVDN9131 OPERATION 22 Main Setup - Setting the Anti-theft Code Step 1 & 2 Step 3 & 4 Step 5 & 6 Step 7 & 8 Step 9 & 10 1) Touch MENU . 2) Touch MAIN SETUP icon. 3) Touch down arrow icon. 4) Touch ****. 5) Enter 0000, then press OK. 6) Set new 4-digit password, then press OK. 7 ) Touch Off. 8) Touch On. 9) Enter new 4-digit pass ...
-
Dual XDVDN9131 - page 24
XDVDN9131 OPERATION 23 Screen Setup Menu From the main menu, press • SCREEN SETUP icon to access the Screen Setup mode. Press the • PAGE DOWN icon to access the Version List (pages 2 and 3). Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or by • pressing the RETURN arro ...
-
Dual XDVDN9131 - page 25
XDVDN9131 OPERATION 24 Screen Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button for more than 3 seconds, then turning the rotary to adjust brightness level. Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch MENU at the top left corner of screen. 2) Touch SCREE ...
-
Dual XDVDN9131 - page 26
XDVDN9131 OPERATION 25 Screen Setup - Setting TFT Angle Set for best viewing angle for your vehicle Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch MENU at the top left corner of screen. 2) Touch SCREEN SETUP icon. 3) Touch << to decrease the screen angle. 4) Touch >> to increase the screen angle. The range is 1 - 4 Default = 1 5) Touch RET ...
-
Dual XDVDN9131 - page 27
XDVDN9131 OPERATION 26 Screen Setup - Touch Screen Calibration Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described. Step 1 Step 2 Step 3 & 4 Step 4 & 5 1) Touch MENU at the top left corner of screen. 2) Touch SCREEN SETUP icon. 3) Touch Calibration in TS Calibration row. 4) ...
-
Dual XDVDN9131 - page 28
XDVDN9131 OPERATION 27 Tuner Mode From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. Current Source Indicator Displays source currently playing. Main Menu Touch MENU to access the main menu. Stereo Indicator Shows that the frequency selected is received in stereo. Information Indicator Displays status of various tuning f ...
-
Dual XDVDN9131 - page 29
XDVDN9131 OPERATION 28 11 19 20 21 12 18 13 17 14 9 16 15 10 Tune Frequency - Up Touching this icon will tune the radio to a higher frequency by one frequency step. Touch and hold for continuous tuning up. (This function can also be performed by pressing the corresponding key on the remote control.) Tune Frequency - Down Touching this icon will tun ...
-
Dual XDVDN9131 - page 30
XDVDN9131 OPERATION 29 AM/FM Tuner Operation AM/FM Tuner Mode Band Manual Tuning Seek Tuning Storing Presets Auto Store Presets Preset Scan From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press MODE until the current station information is displayed on the screen. Touch BAND on the screen ...
-
Dual XDVDN9131 - page 31
XDVDN9131 OPERATION 30 AM/FM Tuner Operation Direct Preset Tuning Scan Tuning Local/Distance Tuning To select a desired station from the preset station list, touch any of the displayed station frequencies or preset numbers from the list. Use the up and down arrows on screen to select between the preset pages, if necessary. From the remote control: ...
-
Dual XDVDN9131 - page 32
XDVDN9131 OPERATION 31 Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants ...
-
Dual XDVDN9131 - page 33
XDVDN9131 OPERATION 32 DVD Setup - Parking Brake Initialization Front Monitor Video Initialization Parking Brake Initialization Situation 1 Parking Brake Initialization Situation 2 SAFETY WARNING • The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash vi ...
-
Dual XDVDN9131 - page 34
XDVDN9131 OPERATION 33 DVD Disc Symbols DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVDN9131 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has b ...
-
Dual XDVDN9131 - page 35
XDVDN9131 OPERATION 34 DVD Setup - Inserting a Disc Inserting a Disc Note Ejecting the Disc Reset the Loading Mechanism Press REL to fold down the front panel. With the label facing up, insert a standard size disc into the slot. Gently close the front panel, the disc will automatically begin playback. Sub-menus may have to be pressed to access the ...
-
Dual XDVDN9131 - page 36
XDVDN9131 OPERATION 35 DVD Setup - Touch Screen Controls There are several hidden TOUCH SCREEN areas as outlined below: "A" area can be used in DVD, A/V 1 and A/V 2 modes to access MAIN menu. Hidden Touch Screen areas while in DVD mode Using the hidden Touch Screen Controls A - Displays MAIN menu B - Displays DVD disc information C - Sele ...
-
Dual XDVDN9131 - page 37
XDVDN9131 OPERATION 36 DVD Setup Menu - Language With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed. Press the current selection to select desired d ...
-
Dual XDVDN9131 - page 38
XDVDN9131 OPERATION 37 DVD Setup Menu - Video Settings With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed. Press the VIDEO icon (3) to display the V ...
-
Dual XDVDN9131 - page 39
XDVDN9131 OPERATION 38 DVD Setup Menu - Rating Note: A DVD disc must be inserted to access these functions and features. With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will aut ...
-
Dual XDVDN9131 - page 40
XDVDN9131 OPERATION 39 Using the Hidden Touch Screen Controls Touch AREA E DVD Mode DVD Operation - Touch Screen Controls 8 From the main menu, touch the DISC icon on the screen to select DVD mode. Setup Menu Touch to access the DVD Setup menu. Stop Touch the icon to stop the chapter where it is (resume stop). Touch again to stop the disc (full sto ...
-
Dual XDVDN9131 - page 41
XDVDN9131 OPERATION 40 Note: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVDN9131 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. Searching a DVD Searching by Time, Title or Chapte ...
-
Dual XDVDN9131 - page 42
XDVDN9131 OPERATION 41 DVD Operation Touch Area E to bring up the on-screen buttons. Touch to fast forward or to fast reverse. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x. From the front panel: Press and hold to fast forward. Press and hold to fast reverse. From the remote con ...
-
Dual XDVDN9131 - page 43
XDVDN9131 OPERATION 42 DVD Operation DVD Audio DVD Disc Information Zoom Mode DVD Title Menu Touch AUD to change the audio stream. Each touch will cycle the audio stream. From the remote control: Press the AUDIO button to select the Audio stream. Notes : • Not all DVD's have multiple languages, therefore this function may be disabled or limi ...
-
Dual XDVDN9131 - page 44
XDVDN9131 OPERATION 43 6 CD Mode From the main menu, touch the DISC icon on the screen to select CD mode. Current Source Indicator Displays source currently playing. Track Number Indicator Displays current track number and total number of tracks on the disc. Track Time Indicator Shows the elapsed time of the current track. Track Title List Displays ...
-
Dual XDVDN9131 - page 45
XDVDN9131 OPERATION 44 CD Operation - OSD Overview Page Down Touch the icon to see the next 6 tracks on the disc. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed. Each touch changes speed from 2x to 4x to 8x t ...
-
Dual XDVDN9131 - page 46
XDVDN9131 OPERATION 45 Navigate the track title list in one of two ways: • Using the Page Up and Page Down buttons on the screen. • Using the arrow buttons on the remote control. To select a desired track from the track title list, touch any track on the list. From the remote control: Press or to scroll through the tracks. When the correct trac ...
-
Dual XDVDN9131 - page 47
XDVDN9131 OPERATION 46 Touch RPT to repeat a track. Rpt Trk will appear next to the MENU button while this feature is activated. Touch RPT again to exit Repeat Mode. From the remote control: Press to select Repeat. Press it a second time to disable Repeat. Note : Shuffle and Repeat modes can not be used simultaneously and engaging one mode will can ...
-
Dual XDVDN9131 - page 48
XDVDN9131 OPERATION 47 9 10 MP3/WMA/JPG Mode From the main menu, touch the DISC or USB icon on the screen. Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the current folder. Elapsed Time Indicator Shows the elapsed time of the current song. Audio to Image I ...
-
Dual XDVDN9131 - page 49
XDVDN9131 OPERATION 48 Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then t ...
-
Dual XDVDN9131 - page 50
XDVDN9131 OPERATION 49 The Audio to Image indicator allows the selection of either audio (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist. Indicates that audio files are currently displayed. Press to switch to viewing image files. Indicates that image files are currently displayed. Press to switch to viewing audio files. Press the ...
-
Dual XDVDN9131 - page 51
XDVDN9131 OPERATION 50 Intro Mode Random Mode Repeat Mode Play/Pause Stop JPG OSD Controls Touch INT again to preview all tracks. Intro will appear next to the MENU button while this feature is activated. Touch INT again to exit Intro Mode. Touch RDM on the screen to shuffle all tracks in the current folder. Rdm Fol will appear next to the MENU but ...
-
Dual XDVDN9131 - page 52
XDVDN9131 OPERATION 51 USB/SD Mode USB/SD Operation - OSD Overview 2 1 3 5 7 19 17 6 9 16 15 13 12 10 11 21 22 23 24 25 26 4 18 20 14 8 9 10 From the main menu, touch the USB or SD icon on the screen. Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the curre ...
-
Dual XDVDN9131 - page 53
XDVDN9131 OPERATION 52 USB/SD Operation - OSD Overview Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed. Each touch changes speed from 2x ...
-
Dual XDVDN9131 - page 54
XDVDN9131 OPERATION 53 USB/SD Operation Connect a USB device or insert an SD card. When inserting an SD card, the label should face away from the unit. Note: The unit will automatically switch to SD mode when an SD card is inserted. The Audio to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed ...
-
Dual XDVDN9131 - page 55
XDVDN9131 OPERATION 54 USB/SD Operation Fast Forward/Fast Reverse Intro Mode Random Mode Repeat Mode Play/Pause Stop Use the Fast Forward or Fast Reverse on-screen buttons to speed up the playback. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x. Press to fast forward. Press to fa ...
-
Dual XDVDN9131 - page 56
XDVDN9131 OPERATION 55 Media Compatibility - Disc MEDIA C D/DV D Fi le Typ e WMA MP 3 Fil e Sys tem IS O96 60 Le ve l 1 , Le vel 2 Le vel 3 X X IS O96 60 Ex tension JOLIE T Playback Filename 3 2 by t es 32 by t es Other Ex tens ions ROMEO Playback X X Filename X X Ap pl e IS O X X File E xtension .mp3 / .MP 3/.Mp3/.mP3 X .w ma / ...
-
Dual XDVDN9131 - page 57
XDVDN9131 OPERATION 56 Media Compatibility - USB/SD MEDIA U SB F la sh Dr i ve/ SD C ard Fi le Typ e WMA MP 3 Fil e Sys tem F AT FAT 1 2 X X FAT 1 6 /FAT 3 2 File E xtension .mp3 / .MP 3/.Mp3/.mP3 X .w ma /.W M A X .r m p /. m4 a X X MPEG Format MP EG 1 X MP EG 2 X MP EG 2 .5 X Samplin g Frequ enc y MP EG 1 X 8/11 .0 25 ...
-
Dual XDVDN9131 - page 58
XDVDN9131 OPERATION 57 Media Compatibility - Notes The following types of discs are compatible: • CD-DA, CD-ROM (ISO), CD-R, CD-RW • DVD Video, DVD+R/RW, DVD-R/RW The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • Discs recorded with Track At Onc ...
-
Dual XDVDN9131 - page 59
XDVDN9131 OPERATION 58 Operation of iPod - OSD Overview Operation of iPod 2 1 3 4 6 17 15 5 7 14 13 11 10 8 9 19 20 21 22 23 16 18 12 9 Connect an iPod device using the included cable. From the main menu, touch the icon of the iPod device on the screen. Current Source Indicator Displays source currently playing. Song Number Indicator Displays curre ...
-
Dual XDVDN9131 - page 60
XDVDN9131 OPERATION 59 Operation of iPod - OSD Overview 11 12 13 14 15 16 17 18 19 20 21 22 23 Fast Forward Touch the icon to fast forward at 2x speed. Touch again to cancel. Fast Reverse Touch the icon to fast reverse at 2x speed. Touch again to cancel. Album Information Displays available album information for the current song. Track Up Touch to ...
-
Dual XDVDN9131 - page 61
XDVDN9131 OPERATION 60 Operation of iPod The content is organized by groups. Touch the on the screen to access the search menu. Once in search menu, select one of the group types from the menu, then select an item in that group. For example: • Select the Artist group and the display will change to a list of available artists. Then select an artis ...
-
Dual XDVDN9131 - page 62
XDVDN9131 OPERATION 61 Repeat Mode Play/Pause High Speed Search Playing Music Files Selecting Music By: Playlists Artists Albums Genres Songs Composers Audiobooks Podcasts Touch RPT to repeat a song. Repeat will appear next to the MENU button while this feature is activated. Touch RPT again to exit Repeat Mode. From the remote control: Press to sel ...
-
Dual XDVDN9131 - page 63
XDVDN9131 OPERATION 62 Operation of iPod Playing Video Files Video Controls 1. Touch icon to access the search menu. 2. Touch Video , then select desired video. Touch Area C to select the previous chapter and Area D to select the next chapter. Note: Not all movies support this feature. Touch Area A to return to the search menu. From the front panel ...
-
Dual XDVDN9131 - page 64
XDVDN9131 OPERATION 63 Viewing Photos Photo Controls Notes Device Compatibility 1. Touch icon to access the search menu. 2. Touch Photo , then begin slideshow from your iPod device. Touch Area A to return to the search menu. Character support - only alphanumeric characters can be displayed on the secondary LCD (ASCII type). The Video and Photo mode ...
-
Dual XDVDN9131 - page 65
64 Auxiliary Inputs - A/V 1 & A/V 2 Rear Camera Operation - (Optional) XDVDN9131 OPERATION Connect an optional audio/video source into the 3.5mm (front panel) input. Select AV/1 from the Main Menu to listen to audio. Engage parking brake as described on page 32 to watch video. Adjust volume on the external audio source as needed (if connected t ...
-
Dual XDVDN9131 - page 66
XDVDN9131 OPERATION 65 Bluetooth ® - OSD Overview (Optional) Before using Bluetooth Bluetooth Mode Make sure the Bluetooth option is set to On in the Bluetooth Setup menu. From the main menu, touch the Bluetooth icon on the screen. A Bluetooth icon will appear anytime a Bluetooth device is connected. Audio Transfer Button Press to transfer audio b ...
-
Dual XDVDN9131 - page 67
XDVDN9131 OPERATION 66 Bluetooth ® - OSD Overview (Optional) Phone book Icon Press to access the phone book menu. Keypad Interface Icon Press to display the keypad interface. 9 10 Settings Default Options Function Bluetooth On Off Turns off the Bluetooth functionality and resets the device list Turns on the Bluetooth functionality On Search No No ...
-
Dual XDVDN9131 - page 68
XDVDN9131 OPERATION 67 Bluetooth ® - Setup Menu (Optional) Pairing Search For Device Step 1 Step 2 Device List Notes Connect Auto Answer Bluetooth MIC Before you can use a Bluetooth device to make hands-free calls or stream audio, it must be authenticated. This is also referred to as "pairing" a device. Note: Please make sure that Blueto ...
-
Dual XDVDN9131 - page 69
XDVDN9131 OPERATION 68 Bluetooth ® - Operation (Optional) Dialed Calls Received Calls Missed Calls Making a Phone Call Answering a Phone Call Ending a Phone Call Notes Press Dialed Calls to retrieve the list of dialed calls from the mobile device. Touch the desired number to call. Press the page up/down buttons to navigate through the pages. Press ...
-
Dual XDVDN9131 - page 70
XDVDN9131 OPERATION 69 Bluetooth ® - Streaming Audio (Optional) 69 1 2 3 Bluetooth Audio Mode Before Using Streaming Audio Streaming Audio Stop Notes The XDVDN9131 supports A2DP wireless streaming audio from your Bluetooth mobile device directly to your head unit. You can also control your music from the front panel of the head unit using AVRCP. M ...
-
Dual XDVDN9131 - page 71
XDVDN9131 OPERATION 70 Navigation 70 Navigation Mode 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) From the main menu, touch the NAVI icon on the screen or press the NAVI button on the front panel. The image above shows the map screen features when in guidance mode. Descriptions of each item are as follows: Zoom out: Zooming out from level 1 t ...
-
Dual XDVDN9131 - page 72
XDVDN9131 OPERATION 71 Navigation 71 The main menu can be accessed by pressing the MENU button on the map screen. Descriptions of each button are as follows: Allows you to search for a location in various ways. Provides editing of the current route or retrieving the current route information. Stops route guidance and removes all existing locations ...
-
Dual XDVDN9131 - page 73
XDVDN9131 OPERATION 72 Navigation 72 Press Where To? to easily search for a location in various ways according to your purpose or preference. Hotkey for route guidance to your home location (saved in your Favorites list). Search for locations saved to your Favorites list. Hotkey for quickly searching the nearest emergency points of interest from yo ...
-
Dual XDVDN9131 - page 74
XDVDN9131 OPERATION 73 Navigation 73 Your current position (and direction) is indicated on the map by the red arrow . For your convenience, previously searched state/province name and city name are initially selected on the first stage of address search. If you want to change state/province, tap Change . For State/Province search, you can search b ...
-
Dual XDVDN9131 - page 75
XDVDN9131 OPERATION 74 Navigation My Route allows you to create a new route or to edit an existing route. Create Route / Edit Route buttons will change depending on situation. Available if a route has not been set. Available if a route has already been set. Use this option to edit your existing route. Allows you to avoid part of the route, a roadbl ...
-
Dual XDVDN9131 - page 76
75 XDVDN9131 OPERATION Navigation Settings allows you to customize the settings of the Navigation system. Change voice/text language of navigation. Change routing options. Change distance units (Miles or Kilometers). Set time and apply options such as Daylight Saving and Sync. with GPS time. Select time zone. Turn on/off the speed warning and set a ...
-
Dual XDVDN9131 - page 77
76 Limited One Year Warranty XDVDN9131 OPERATION This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dua ...
-
Dual XDVDN9131 - page 78
XDVDN9131 OPERATION 77 End-User License Agreement (EULA) IMPORTANT – READ THESE TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE. This End-User License Agreement (“EULA”) is a legal agreement between you and EnGIS Technologies, Inc. (EnGIS). This EULA applies to (the use of) EnGIS software, including ...
-
Dual XDVDN9131 - page 79
XDVDN9131 OPERATION 78 End-User License Agreement (EULA) 6) LIMITED WARRANTY: a) The Software is intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. EnGIS makes no warranty as to the accuracy or completeness of map data or other third-party conte ...
-
Dual XDVDN9131 - page 80
XDVDN9131 OPERATION 79 Specifications Disc FM Tuner AM Tuner USB Bluetooth Monitor General Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 15dBf Stereo separation @ 1kHz: 35dB Frequency response: 30Hz-11kHz Tuning range: 530 ...
-
Dual XDVDN9131 - page 81
XDVDN9131 OPERATION 80 Troubleshooting General Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse(s) Unit has power (but no sound) S ...
-
Dual XDVDN9131 - page 82
XDVDN9131 OPERATION 81 Troubleshooting Bluetooth Problem Cause Action "Please connect first" is displayed when the Talk button is pressed There is no mobile device connected to the head unit Pair and or connect a mobile device to the head unit as described on page 67 Mobile device will not connect to the head unit Bluetooth function is no ...
-
Dual XDVDN9131 - page 83
XDVDN9131 OPERATION 82 Navigation Problem Cause Action No voice guidance Left front speaker is not connected Check speaker connection at left front speaker Navi volume is turned down Increase the Navi volume as described on page 10 Main volume is Muted Increase the Main volume Bluetooth call is in progress Voice guidance is not available during a B ...
-
Dual XDVDN9131 - page 84
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2009 Dual Electronics Corp. All rights reserved. NSA1209-V01.4 Printed in China ...
Do you have a question concerning Dual XDVDN9131?
Use the form below
If you did not solve your problem by using a manual Dual XDVDN9131, ask a question using the form below. If a user had a similar problem with Dual XDVDN9131 it is likely that he will want to share the way to solve it.