English dropdown-ico

Manual Lexmark 036

364 pages 9.66 mb
Download

Go to site of 364

Summary
  • Lexmark 036 - page 1

    MX910 Series User's Guide June 2014 www.lexmark .com Machine type(s): 7421 Model(s): 036, 236, 436 ...

  • Lexmark 036 - page 2

    Conten ts Safe ty infor matio n. ...... ........ ..... ...... ..... ........ ...... ..... ...... ..... ........ ..... ...... ...... .7 Learn ing a bout t he p rinte r..... ........ ....... ........ ........ ........... ........ ........ ....... .....9 Findi ng in formati on ab out t he prin ter. .......... ...... ...... ....... ...... ....... ..... ...

  • Lexmark 036 - page 3

    Settin g up the pr inte r software ... ........ ..... ..... .... ..... ..... ........ ..... .... ...... .... ..... ..... ....... ...... .... ..... .. ........ ..... ..45 Networ kin g.. ..... ..... ....... ..... .... ..... ..... ..... .... ..... ..... ..... .... ....... ..... ..... ..... .... ..... ..... ..... .... ..... . ......... .... ..... ..... ...

  • Lexmark 036 - page 4

    Faxing ...... ....... ....... ....... ...... ...... ....... ....... .......... ...... ...... ....... ....... ....... ...... ..89 Settin g up the pr inte r to fax .... ..... ........ ...... ..... ..... ..... ..... ...... ..... ........ ..... ..... ...... ..... ..... ..... ..... ........ ..... .....8 9 Sendi ng a f ax.... ...... ...... ...... ....... ...

  • Lexmark 036 - page 5

    Mainta ini ng the p rinte r... ..... ........ ..... ..... ...... ........ ..... ...... ..... ........ ..... ..... ..205 Cleani ng pr inter p arts. ..... .... .... ....... ..... .... ..... .... .... ..... ....... .... ..... .... .... ..... ...... ..... .... ..... .... .... ..... .... ..... .... .205 Check ing the statu s of pa rts an d suppli es... ...

  • Lexmark 036 - page 6

    Trou ble shoot ing .... .... ..... ..... ...... ..... ..... .... ..... ..... .... ....... ..... .... ..... ..... .... .....27 1 Underst andi ng the p rin ter messages ......... ..... ...... ...... ...... ...... ..... ......... ...... ...... ...... ...... ...... ......... .. ....... 271 Solvi ng pri nter p robl ems...... ..... ...... ..... ..... ... ...

  • Lexmark 036 - page 7

    Safety information Connect t he power cord di rectl y to an appropr iately rated and prop erly gr ounde d electr ical o utlet th at is near the product and ea sily acc essibl e. CAUTION—PO TENTIAL IN JURY: Do not us e this prod uct wi th ex tensi on cord s, multiou tlet pow er st rips, multiou tlet ext enders, or oth er types of sur ge or U PS de ...

  • Lexmark 036 - page 8

    This pro duct pr oduces ozon e during norm al operat ion, an d is equ ipped wi th a f ilter de signe d to lim it ozon e concen tratio ns to le vels we ll below t he reco mmend ed expo sure limits. To avoid hi gh oz one co ncentrat ion l evels du ring extensiv e usage, inst all th is product in a well-vent ilated a r ea and replace the ozone and exh ...

  • Lexmark 036 - page 9

    Learni ng about the prin ter Finding informa tion about th e printer What are you looking for? Find it here Initia l setup in struct ions: • Connecting the printer • Installin g the print er software Setup documentation—The setu p documentation came with the printer and is al so available at http://support.le xmark.com . Additional setup and ...

  • Lexmark 036 - page 10

    What are you looking for? Find it here The latest supplemental information, upda tes, and customer support: • Docu mentati on • Driver d ownloa ds • Live chat support • E ‑ mail support • Voice support Lexmark support Web site— http://support.le xmark.com Note: Select your country or region, and then select your product to view the ap ...

  • Lexmark 036 - page 11

    • Observe the recommended tem peratures and avoid fluctuations: Ambient temperature 10 to 30°C (50 to 86°F) Storage te mperat ure -10 to 40 °C (14 to 104°F) • Allow the following recommended amount of space around the printer for pro per ventilation: 1 Rea r 120 mm (4.8 0 in .) 2 Righ t side 400 mm ( 15. 70 in. ) 3 Front 444.5 mm (17.5 0 in ...

  • Lexmark 036 - page 12

    Basic model 1 Automatic document f eeder (ADF) 2 ADF tr ay 3 ADF bi n 4 Control panel 5 Multipurpose feeder 6 Stand ard 2 x 500-shee t tray 7 Standard b in Conf igure d model CAUTION—TIPPI NG HAZARD: Fl oor-mo unted config urations require a dditio nal furni ture for stabilit y. You mus t use eith er a print er st and or printer base if you are u ...

  • Lexmark 036 - page 13

    Hardware option Alternative hardware option 1 Staple f inisher Note: This is supported only in selec t printer models. None 2 3000 ‑ sheet tray None 3 2 x 500 ‑ sheet tray 2500 ‑ sheet tray 4 2500 ‑ sheet tray 2 x 500 ‑ sheet tra y 5 Finis her • Staple, hole punch finisher • Bookle t fin ish er None When us ing op tiona l tray s: • ...

  • Lexmark 036 - page 14

    Using the ADF and scan ner glass Automatic d ocument f eeder (ADF) Scanner glass • Use the ADF f or multiple ‑ page or two-sided documents. • Load an origin al document faceup. • Use the scanner gl ass for single ‑ page documents, book pages, small items (such as postc ards or photos), transparencies, photo paper , or thin media (such as ...

  • Lexmark 036 - page 15

    Understandin g the printer control panel Using the control panel Use the To 1 Display • Vi ew the printer status and messages. • Set up and operate th e printer. 2 Home button Go to the home screen. 3 Sleep button Enable Sleep mode or Hibernate mode. The following actions wake the printer from Sleep mo de: • Touching the control pa nel home s ...

  • Lexmark 036 - page 16

    Indicator light Printer st atus Off The print er is o ff or in Hibernate mo de. Blinking green The printer is warming up, proc essing data, or pri nting. Solid gree n The print er is o n, but idl e. Blinking red The print er requ ires user interventi on. Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber T ...

  • Lexmark 036 - page 17

    Touch To 7 Forms and Favorites Quickly find and print frequently used online forms. 8 Menu icon A ccess the printer menus. Note: The menus are availabl e only when the print er is in Ready state. 9 Bookmarks Create, organize, and save a set of bookmarks ( URL) into a tree view of folders and file links. Note: The tree view supports only boo kmarks ...

  • Lexmark 036 - page 18

    Feature Description Status message bar • Sho w th e c urr en t pri nte r st atu s su ch as Rea dy or Busy . • Show printer conditions such as Toner L ow or Car tridge Low . • Show intervention messages so the printer can continue processing. Printer IP address Example: 123.123. 123.12 3 The IP address of your network prin ter is located at th ...

  • Lexmark 036 - page 19

    Other to uch- scree n butto ns Touch To Acce pt Save a se tting. Cancel • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving chan ges. Reset Reset v alues on the screen. Underst anding the print er contro l panel 19 ...

  • Lexmark 036 - page 20

    Setting up and usin g the home screen applications Notes: • Your home screen may vary dependin g on your hom e scree n cust omizat ion se ttings, admin istrati ve set up, and active e mbedded appl ications . • There m ay be addit ional so lutio ns and a pplicat ions av ailable for purc hase. For mo re info rmatio n, go to www.lexmar k.com or co ...

  • Lexmark 036 - page 21

    Note: An I P addr ess a ppears as four sets of numbers separa ted by peri ods, s uch as 123.123.123.123 . 2 Open a Web browser, and then type the print er IP address in the ad dress field. 3 Press Enter . Note: If you are us ing a pr oxy se rver, the n tempo rarily d isable it to loa d the We b page c orrectl y. Customizing the home screen 1 Open a ...

  • Lexmark 036 - page 22

    Activating the home screen application s Finding information about the home screen ap plications Your printer comes with preinstalled home s creen applicat i ons. Before you can u se these applicatio ns, you m ust first activa te a nd set u p these app licati ons usin g the Emb edded Web Ser ver. For mo re inf ormat ion o n acces sing the Embedded ...

  • Lexmark 036 - page 23

    Settin g up Card Copy Note: A later versio n of this User 's Guid e may co ntain a di rec t link to the Administ rator's Guide of this applic ation. To check f or upda tes of thi s User's G uide , go to htt p://suppo rt.le xmark .com . Use To Quic kl y an d eas ily c opy in sur anc e, iden ti ficat io n, a nd oth er wa llet ‑ size ...

  • Lexmark 036 - page 24

    Use To Create shortcuts on t he printer home screen, with sett i ngs for up to 25 frequently used copy, fax, or e- mail jobs. To use the a pplicat ion, to uch MyS hortcut , and then follow the instruction s on the printe r display. Set ting up Mu lti Se nd Note: A later versio n of this User 's Guid e may co ntain a di rec t link to the Admini ...

  • Lexmark 036 - page 25

    Use To Scan a document and send it to a shar ed networ k folder. You can define up to 30 unique folder destinations. Notes: • The printer must have permission to write to the destinations. From the co mputer where the destination is specified, use sharing, securi ty, and fire wall settings to al low the printe r at least a write access. For help, ...

  • Lexmark 036 - page 26

    Exporting and impo rting a configura tion You can e xport config uration sett ings int o a text file, a nd then import the f ile to a pply th e setti ngs to o ther printers . 1 Open a Web browser, and then type the print er IP address in the ad dress field. Note: Vie w the I P address on the printer home sc reen . The IP a ddress a ppears as four s ...

  • Lexmark 036 - page 27

    Additional printer setup Installing internal options CAUTION —SHOCK HA ZARD: If you are access ing the c ontrol ler board o r instal ling opt ional har dware or memo ry device s so metim e after sett ing up th e print er, th en tur n the p rinter off, and unplu g the p ower c ord from th e electr ical ou tlet befo re cont inuing . If you have a n ...

  • Lexmark 036 - page 28

    1 Remove the connect or cover. 2 Remove the screws from the controller board access cover. 3 Remove the access co ver. 4 Use the followi ng illust ration to locate the appropria te connecto r: Warning—Pote ntial Da mage: Contr oller board electronic co mponents ar e easily damaged by s tatic electricit y. Touch a m etal surfac e on th e print er ...

  • Lexmark 036 - page 29

    1 Option card connec tor 2 Mem ory ca rd con necto r 3 Lexmark Internal Solut ions Port or printer hard disk connector 5 Align the base of the access cover to the printer. Additi onal pr inter se tup 29 ...

  • Lexmark 036 - page 30

    6 Reattach the acce ss cover. 7 Tigh ten the scr ews on the access cover . 8 Reattach th e connector cover. Installing a memory card CAUTION —SHOCK HA ZARD: If you are access ing the c ontrol ler board o r instal ling opt ional har dware or memo ry device s so metim e after sett ing up th e print er, th en tur n the p rinter off, and unplu g the ...

  • Lexmark 036 - page 31

    4 Push the memo ry card straight into the co nnector, and th en push the card towa rd t he cont rolle r board wall un til it cl icks into plac e. Installing an op tional card CAUTION —SHOCK HA ZARD: If you are access ing the c ontrol ler board o r instal ling opt ional har dware or memo ry device s so metim e after sett ing up th e print er, th e ...

  • Lexmark 036 - page 32

    4 Push the ca rd firmly into plac e. Warning—Pote ntial Da mage: Imprope r inst allati on of the c ard m ay ca use d amag e to th e car d and the contr oll er bo ard. Note: The entir e lengt h of th e conne ctor on the card mu st touch and be flus h with the contr oller board. Installing an Inte rnal Solutions Port The co ntrol ler b oar d su ppo ...

  • Lexmark 036 - page 33

    1 Unpack the ISP kit. 1 ISP 2 Plastic moun ting bracket 3 Thumbscrews 2 Access the co ntroll er bo ard. Fo r mo re i nf orm ati on, see “Ac cessing the contro ller board” on page 27 . 3 Remove the p rinter hard disk. Note: The hard di sk mus t be remove d be fore i nstal ling a n IS P. a Unplug the hard d isk int erface c able fro m the con tro ...

  • Lexmark 036 - page 34

    b Remov e the screws that se cure the har d dis k. c Remov e the har d dis k. 4 Install the ISP in the same location where the hard disk was located on the controller board. a Align the po sts of th e plastic mou nting bracket with the h oles on the controller board cage, and then press the bracke t on the c age unt il it clicks into place. Additi ...

  • Lexmark 036 - page 35

    b Install the I SP on th e bracket . c Use the pro vided thumbscrew for the ISP to attach the ISP to the bracket. 5 Secure th e ISP mou nting bracket to the con troller boar d cage us ing the sc rews. 6 Remov e the t humbs crews that attach the hard disk moun ting bracket to the hard d isk , and th en remo ve t he brac ket. Additi onal pr inter se ...

  • Lexmark 036 - page 36

    7 Align t he standoff s of the ha rd d isk wit h the hole s on th e IS P, an d then press t he har d dis k down unti l the standof fs click into place. 8 Insert the plug of t he hard disk interface cable into th e connector on the ISP, and then connect the ISP so lution interface cable into the receptacle of the controller board. Removing a printer ...

  • Lexmark 036 - page 37

    CAUTION —SHOCK HA ZARD: If you are access ing the c ontrol ler board o r instal ling opt ional har dware or memo ry device s so metim e after sett ing up th e print er, th en tur n the p rinter off, and unplu g the p ower c ord from th e electr ical ou tlet befo re cont inuing . If you have a ny other device s attach ed to th e printe r, then tu ...

  • Lexmark 036 - page 38

    4 Remove the ha rd di sk. Installing hardware options Order of ins tallation CAUTION—PO TENTIAL IN JURY: Th e print er we ight is great er tha n 18 kg (40 lb) and r equire s two or mor e trained p ersonnel to lift it safely. CAUTION—TIPPI NG HAZARD: Fl oor-mo unted config urations require a dditio nal furni ture for stabilit y. You mus t use ei ...

  • Lexmark 036 - page 39

    CAUTION—PO TENTIAL IN JURY: Th e print er we ight is great er tha n 18 kg (40 lb) and r equire s two or mor e trained p ersonnel to lift it safely. CAUTION —SHOCK HA ZARD: If you are access ing the c ontrol ler board o r instal ling opt ional har dware or memo ry device s so metim e after sett ing up th e print er, th en tur n the p rinter off, ...

  • Lexmark 036 - page 40

    Accessory name Quantity Screw 5 1 Turn off th e prin ter. 2 Unplug the power cor d from the electrical outlet and then from th e printer. 3 Unpack the optional tray, and th en re move all pack ing mat erial. 4 Atta ch th e stabi lizi ng feet to t he opti ona l tray . Note: Make sure the feet click in to pl ace. Additi onal pr inter se tup 40 ...

  • Lexmark 036 - page 41

    5 Remove the connect or cover from th e printer. 6 Lif t the p rinte r u sing the handles at th e sid es. CAUT ION—P OTE NTIA L INJU RY: The printer weight is greater tha n 18 kg (40 lb) and requ ires two or mor e trained p ersonnel to lift it safely . Additi onal pr inter se tup 41 ...

  • Lexmark 036 - page 42

    7 Align the p rinter w ith th e tray, and then lo wer the pr int er into place. 8 Remove the tape from the connectors, and then plu g the connectors int o the receptacles of the printer. 9 Open Tr ay 2 and Tr ay 3. Additi onal pr inter se tup 42 ...

  • Lexmark 036 - page 43

    10 Secure th e tray to the pri nter using the lo cking cli ps an d the meta l brack et. • Back • Front 11 Rein sta ll th e con ne ctor cove r. 12 Connect the power cord to the printer and electrical outlet. Additi onal pr inter se tup 43 ...

  • Lexmark 036 - page 44

    13 Turn on t he prin ter . 14 Set t he print er so ftware to re cogni ze the op ti onal tr ay. Fo r more infor matio n, see “Add ing availab le options in the print driv er” on page 45 . Attaching cables CAUTION—PO TENTIAL IN JURY: D o not use th e fax fe ature du ring a light ning storm . Do no t set up thi s produc t or make an y elect rica ...

  • Lexmark 036 - page 45

    Use the To 3 Printer power cord socket Connect the printer to a proper ly grounded electrica l outlet. 4 Internal Soluti ons Port (ISP) or printer hard disk slot Note: If the prin ter has support for wireless co nnection, then the wireless antenna is attached here. Attach an ISP or a printe r hard disk. 5 Ethernet port Connect the printer to a netw ...

  • Lexmark 036 - page 46

    3 Naviga te to the Config uratio n tab, and the n select Upda te Now ‑ As k Printe r . 4 Apply the changes. For Macintosh users 1 From Syst em Preferences in the Apple men u, navigate to your printer, and then select Option s & Supplies . 2 Navigat e to th e list of hardw are opti ons, and then ad d any in stal led opti ons. 3 Apply the chang ...

  • Lexmark 036 - page 47

    • Channel (f or ad ho c ne tworks ) —Th e chan nel d efaults to au tomati c for infr astr uct ure netwo rks. Some ad hoc ne tworks will al so r equire t he au tomati c se tting. C heck w ith y our sy stem support pers on if y ou are not su re which ch annel t o select. • Security M ethod —There are f our basic optio ns fo r Se curi ty Me th ...

  • Lexmark 036 - page 48

    1 From the pr inter co ntro l pan el, navi gate t o: > Networ k/Ports > Net work [ x] > Network [x] Setup > Wireless > Wirele ss Conne ction S etup 2 Select a wirel ess conne ction setup. Use To Searc h for ne twor ks Show availabl e wireless connections. Note : This menu item shows all broadcast secu red or unsecured SSIDs. Enter a ...

  • Lexmark 036 - page 49

    Connec ting the p rinter to a wire less netwo rk usin g the Embedd ed Web Se rver Before you be gin, ma ke sure that: • Your pr inter is co nnected te mporar ily to an Eth ernet n etwork . • A wireless network ada pter is instal led in your pr inter and wo rking properly . For more info rmation, see th e instr uction sheet that came wit h the w ...

  • Lexmark 036 - page 50

    3 Apply the changes. Setting up seri al printing (Wi ndows only) After i nstall ing the seri al or com muni cation ( COM) po rt, c onfigure the printe r and the co mputer. Note: Seria l printi ng r educes p rint spe ed. 1 Set the pa rameters in the pr int er. a From t he cont rol panel, n avig ate to the menu f or the port s ettin gs. b Locate t he ...

  • Lexmark 036 - page 51

    Loading paper and specialty media The sele ction and h andlin g of pape r and spec ialty me dia can af fect how r eliably do cument s print . For mo re infor mation , see “Avoiding jams” on p age 242 and “Storin g paper” o n page 63 . Setting the pap er size and typ e From the home s creen navig ate to : > Paper Me nu > Paper Size/Typ ...

  • Lexmark 036 - page 52

    2 Squeeze and slide the p aper guides to the cor rect position for the size o f the paper you are loading. Note: U se th e indic ator s on the bot tom of the t ray to posi tion the guides . 3 Flex the sheets ba ck and forth to loosen the m, and then fan them. Do n ot fold or crease t he paper. Straight en the edges on a level su rface. Loading pape ...

  • Lexmark 036 - page 53

    4 Load th e paper stack with the printabl e side f aceup. Notes: • Load print able si de facedo wn for duplex p rinting. • Load pre-punched paper with the holes to ward the front or the left side of the tray. • Load letterhead with the header on the left side of the tray. • Make sure that the paper is below th e maxim um fill line on t he e ...

  • Lexmark 036 - page 54

    2 Adjust the guide to match th e size of the paper you are loading. 3 Flex the sh eets of pa per back and forth to loo sen th em, and th en fan t hem. Do not fo ld or crease the pa per. Str aighten the edges on a level surface. 4 Load the pap er. • Load only one size an d type o f paper. Loading letterhead Without an opti onal finisher With an op ...

  • Lexmark 036 - page 55

    Without an opti onal finisher With an option al finisher Two ‑ si ded pr i nt ing Note: For lo ng-edge orientatio n, load letterhead faceup with the header on the right side of the feeder . Two ‑ sided printing Note: For long-edge orientati on, load letterhead faceup with the header on the left si de of the feeder. Loading prepunched paper One ...

  • Lexmark 036 - page 56

    • Make sure that the paper is below th e maximum fill line. Overfilling may ca use paper jams. 5 From the co ntrol p anel, se t the paper size a nd paper type in the Paper menu to mat ch the p aper load ed in the feeder. Linkin g and u nlinkin g tray s The print er l inks t rays when the s pecif ied pap er si ze an d type are th e sam e. When a l ...

  • Lexmark 036 - page 57

    Creat ing a cu sto m name for a p aper type 1 From the home s cre en, n avig ate to : > Pape r Me nu > Cu stom Name s 2 Type a cu stom pa per typ e name, an d then a pply the changes . 3 Touch Custom Types , and then verify i f th e new cust om pa per type name has r eplace d the custom name. Assigning a custom paper ty pe Using the Embedded ...

  • Lexmark 036 - page 58

    Paper and specialty media guide Notes: • Make sure tha t the paper size, type , and weight ar e set co rrectly on the c omputer or contr ol pane l. • Flex, fan, and straighten specialty media before loading them. • The printer may print at a reduced speed to prevent damage to the fuser. • For more informat ion o n card s tock and l abels, s ...

  • Lexmark 036 - page 59

    – Have bent corners. – Have rough, cockle, o r laid fin ishes. • Adjust the width guides to fit the width of the envelopes. • Before loading the envelopes on the tr ay, flex the stack of envelop es back and forth to loosen them, and then fan them. Straighten the edges on a level su rface. Note: A combina tion of high humidit y (over 60%) a ...

  • Lexmark 036 - page 60

    Tips on us ing transp arencies • From the print er co ntrol panel , set t he pape r si ze, type, t exture, and weig ht in the Pap er me nu to m atch t he transparencies loaded in the tray. • Print a test page on th e transparencies being considered for use before buying large quantities. • Use transpar encies desig ned specific ally for laser ...

  • Lexmark 036 - page 61

    Grain direction Grain ref ers to t he alignm ent of t he pape r fibers in a sh eet of pap er. G rain is e ither grai n long , running the length of the paper , or grain short , runn ing the wid th of t he paper . For 60–256 g /m 2 (16–6 8 ‑ lb) p aper, g rain lon g paper is recom mende d. Fiber content Most h igh ‑ qua lity xerogra phic pa ...

  • Lexmark 036 - page 62

    • Thickness (impacts how much can be loaded into a t ray) • Surfac e roug hness (measur ed in S heffiel d unit s, imp acts pri nt cla rity and h ow well toner fu ses to the pap er) • Surface friction (determin es how easily sheets can be separated) • Grain and form ation (impac ts cu rling, which a lso inf luence s the mechani cs of ho w th ...

  • Lexmark 036 - page 63

    For more informati on about Lexmark, visit www.lexma rk.co m . Genera l sust ainabi lity-rel ated infor mation can be found at the Envi ronm ental Sust ainab ili ty link. Storing paper Use these paper storag e guidelines to help avoid jams and uneven print quality: • For best resu lts, store paper where the tem perature is 21°C (70 °F) and the ...

  • Lexmark 036 - page 64

    Paper si ze Dimensions Sta ndard 500 ‑ sheet tray (T ray 1) Standard 500 ‑ sheet tray (Tray 2) 2 x 500 ‑ sheet tray 2500 ‑ sh eet tray 3000 ‑ sheet tray Multipurpose feeder 3 Two ‑ sided printing Letter 216 x 2 79 mm (8.5 x 11 in.) 2 2 Legal 216 x 356 mm (8.5 x 14 in.) XX Executive 184 x 267 m m (7.3 x 10. 5 in.) XX JIS B4 257 x 364 mm ...

  • Lexmark 036 - page 65

    Paper si ze Dimensions Sta ndard 500 ‑ sheet tray (T ray 1) Standard 500 ‑ sheet tray (Tray 2) 2 x 500 ‑ sheet tray 2500 ‑ sh eet tray 3000 ‑ sheet tray Multipurpose feeder 3 Two ‑ sided printing DL Envelope 110 x 220 mm (4.3 x 8. 7 in.) XX X X X X C5 Enve lope 162 x 229 mm (6.4 x 9 in .) XX X X X X B5 Envelope 176 x 250 m m (6.9 x 9. 8 ...

  • Lexmark 036 - page 66

    Paper si ze Dimensions ADF Scanner glass A3 297 x 420 mm (1 1.69 x 16.54 i n.) 12 x 18 305 x 457 mm (1 2 x 18 in.) XX 11 x 17 279 .4 x 43 1.8 mm (1 1 x 17 in .) Oficio 216 x 340 mm (8 .5 x 13 .4 in. ) 2 2 Folio 216 x 330 mm (8 .5 x 13 in .) Statement 14 0 x 216 m m (5.5 x 8.5 i n.) Universa l 89 x 98.4 mm (3.50 x 3.87 in.) to 297 x 431. 8 mm ( 11. ...

  • Lexmark 036 - page 67

    Paper type Standard 500 ‑ shee t tray (Tray 1) Standard 500 ‑ sheet tray (Tray 2) 2 x 500- sheet tra y 2500 ‑ sheet tray 3000 ‑ sheet tray Multipurpose feeder ADF Scanner Glossy 1 Heavy Glossy 1 Labels X X X X X Vinyl La bels X X X X X X Bond 1 Envelope X X X X X Rough Envelope X X X X X Letterhead 1 Preprint ed 1 Colored Paper 1 Light Pape ...

  • Lexmark 036 - page 68

    Supported paper sizes Paper size Staple fi nisher Staple, hole punch finisher bin 1 Staple, hole punch finisher bin 2 Booklet finisher A6 3 3 XX A5 3 3 2 X JIS B5 X JIS B4 Executive X Letter A4 Legal 4 12 x 18 1 3 1 11 x 17 SRA3 1 3 1 A3 Oficio 1 3 3 X Folio 1 3 3 X Statement 1 3 3 X Universa l 3 1 5 1 Paper is supported only if the finish er stack ...

  • Lexmark 036 - page 69

    Pape r typ e Staple finis her Staple, hole punch finisher Booklet finisher Card S tock 2 X Trans p aren cy 1 2 3 X Recycled 2 5 Glossy 2 5 Heavy Glossy 2 4 X Labels 2 3 X Bond 5 Envelope 2 3 X Rough Envelope 2 3 X Letterhead 5 Preprint ed 5 Colored Paper 5 Light Paper 5 Heavy Paper 2 4 X Rough Cotton 2 X Custo m Type 5 1 Print on transparenc ies by ...

  • Lexmark 036 - page 70

    Printing Printing forms and a docume nt Printing forms Use Fo rms and F avori tes t o qui ckly an d easil y ac cess fr eque ntly used f orms or ot her inform ation that is re gularl y print ed. Before you ca n use th is app lication , first set i t up on th e printe r. For m ore in formati on, see “Se tting up Forms and Favorites ” on page 22 . ...

  • Lexmark 036 - page 71

    Adjusting toner darkness 1 From the home s cre en, n avig ate to : > Set tin gs > Print Settings > Qu ality Me nu 2 Adjust the to ner dar kness setti ng, and then s ave the chang es. Printing from a flash drive or mobile device Printing from a flash dri ve Notes: • Before prin ting an encr ypted PDF file, yo u are prom pted t o type t he ...

  • Lexmark 036 - page 72

    2 From the co ntrol p anel, to uch the document you wan t to pr int. 3 Specif y the num ber of copies to be pri nted, a nd then send th e job f or print ing. Notes: • Do not r emove the flas h drive from t he USB p ort unt il the docume nt has finish ed pri nting . • If you leave the flash drive in the printer afte r leaving the i nitial USB m ...

  • Lexmark 036 - page 73

    Note: Mobile printin g applica tions m ay also be availa ble from your mo bile dev ice man ufacturer . Printing confidential a nd other held jobs Storing print jo bs in the printer 1 From the pr inter co ntro l pan el, navi gate t o: > Sec urit y > Confidential Print > select the print job typ e Use To Max Invalid PIN Limit the number of t ...

  • Lexmark 036 - page 74

    3 Select the prin t job type , and then assig n a user n ame. 4 Send the pri nt job to the pr inter. 5 From the printer home screen, open the Held Jobs folder and th en release the job. For Macintosh users 1 With a d ocumen t open, selec t File > Print . 2 From the pr int o ption s or C opies & Pages pop ‑ up menu, se lec t Job Rout ing . ...

  • Lexmark 036 - page 75

    Printing a directo ry lis t A direct ory lis t show s the re sources stor ed in a f lash memory or in th e prin ter ha rd di sk. From the home s creen, na vigate to : > Report s > Print Directory Canceling a print job Cancel ing a print job fro m the pri nter con trol p anel 1 From the pr inter co ntro l pan el, touc h Cancel Job or press on ...

  • Lexmark 036 - page 76

    Copying Automatic d ocument f eeder (ADF) Scan ner glas s • Use the ADF f or multiple ‑ page or two-sided documents. • Load the orig inal documen t faceup. • Use the scanner glass fo r single ‑ page documents, book pages, small items (such as po stcards or phot os), transparenc ies, photo paper, or thin medi a (suc h as magazine cli pping ...

  • Lexmark 036 - page 77

    Copyin g on transparenci es or letterh ead 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 From the home s cre en, n avig ate to : Copy > Copy fr om > s elect the size of the orig inal do cument > 3 Touch Copy to , and th en se lect th e tray t hat c ontai ns the special ty m edia. If you are loading the spec ...

  • Lexmark 036 - page 78

    Customizing copy s ettings Copyin g to a diff erent si ze 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 From the home s cre en, n avig ate to : Copy > Copy fr om > s elect the size of the orig inal do cument > 3 Touch Copy to , and then s elect a new size for the cop y. 4 Touch > Copy It . Making copi es ...

  • Lexmark 036 - page 79

    Copyin g on bo th side s of the pape r (two ‑ side d) 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 From the home s cre en, n avig ate to : Copy > Si des (Du plex ) > select the preferr ed two ‑ sid ed me thod Note: For the preferred method, th e first number rep resents sides of the orig inal documents wh ...

  • Lexmark 036 - page 80

    1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 From the home s cre en, n avig ate to : Copy > ent er the number of copies > Coll at e > sel ect th e pr eferred orde r of pa ges > > Copy It Placing separator sh eets bet ween copies 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ...

  • Lexmark 036 - page 81

    3 Load th e nex t doc ument into th e ADF t ray o r on th e sc anner gl ass, and the n touc h Scan from auto matic feeder or Scan from flatb ed . Note: Change the scan job sett ing s, if nece ssary. 4 If you have an other do cument to sca n, then repe at the previous step. Otherw ise, to uch Fini sh t he job . Placing a h eader or footer on pages 1 ...

  • Lexmark 036 - page 82

    Scale This op tio n lets you scale th e docu ment from 25% to 4 00% of th e orig inal doc ument si ze. You c an also s et au tomati c scal ing. • When copying to a diffe rent paper size, s uch a s fro m legal ‑ size to letter ‑ size pape r, set the “Copy fr om” and “C opy to” paper s izes automat ica lly to s cale th e sc an ima ge to ...

  • Lexmark 036 - page 83

    Using the adva nced op tions • Advance d Du plex —This specifies the docume nt orie ntation, o ne-side d or two-sid ed print ing, and ty pe of binding. • Advanced Imagin g —Thi s adjus ts the Auto Cent er, Backgr ound Removal, C olor B alan ce, Colo r Drop out, Co ntrast , Mirr or Imag e, Nega tive I mage, S can Edg e to E dge, S hadow D et ...

  • Lexmark 036 - page 84

    E-mailing Automatic d ocument f eeder (ADF) Scan ner glas s • Use the ADF f or multiple ‑ page or two-sided documents. • Load the orig inal documen t faceup. • Use the scanner glass fo r single ‑ page documents, book pages, small items (such as po stcards or phot os), transparenc ies, photo paper, or thin medi a (suc h as magazine cli ppi ...

  • Lexmark 036 - page 85

    Creating an e-mail shortcut Notes: • Make su re that E -mail Short cuts is set to Dis play . From the home s cree n, tou ch > Se tti ngs > G eneral Settings > Home screen custo mization > E-mail Shortcuts > Di splay > Submit . • To delet e an e-mail shortc ut, t ouch > Manag e Shortc uts > E ‑ mail Sh ortcuts > the ...

  • Lexmark 036 - page 86

    Sending an e ‑ mail usin g a shortcu t numb er 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 Press # , and then enter t he shortcut number using the keypad. 3 Touch Send It . Sending an e ‑ mail usin g the addres s book 1 Load an o rigina l docume nt into the ADF tray or on th e scann er gl ass. 2 From the home ...

  • Lexmark 036 - page 87

    Message This opt ion let s you type a messag e that will be sent w ith your scanned atta chment . File Name This op tion lets you cu sto mize the at tachm ent fil e name. Original Size This op tion le ts you set the pap er size of the docum ents you a re going to e ‑ mail. Wh en Original Size is set to M ixed Sizes, yo u can scan an origi nal do ...

  • Lexmark 036 - page 88

    Page Setup This option lets you chang e the follo wing sett ings: • Sides ( Duplex) —This sp ecifi es if the o rigi nal doc ument is print ed on o nly one sid e or o n bo th side s of t he paper . This also identifies what needs to be scanned for inclusion in the e-mail. • Orientat ion —This spec ifies the or ienta tion of the o rigi nal do ...

  • Lexmark 036 - page 89

    Faxing Automatic d ocument f eeder (ADF) Scan ner glas s • Use the ADF f or multiple ‑ page or two-sided documents. • Load the orig inal documen t faceup. • Use the scanner glass fo r single ‑ page documents, book pages, small items (such as po stcards or phot os), transparenc ies, photo paper, or thin medi a (suc h as magazine cli ppings ...

  • Lexmark 036 - page 90

    Initial f ax setup Many coun tries and r egion s requ ire ou tgoi ng fax es to contai n the follo wing in form ation in a ma rgin at the to p or bottom of each tra nsmit ted pa ge, or on the f irst pa ge of the trans missi on: f ax na me (i dent ificati on o f the busin ess, o ther enti ty, or indi vidual s ending the me ssage) and fax number (tel ...

  • Lexmark 036 - page 91

    Choos ing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax l ine To conn ect: 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the print er to t he po rt of the pr inter. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips fo r this s etup: • You c an ...

  • Lexmark 036 - page 92

    Setup 2: Printer is sharing the li ne with an answering machine Connect ed to th e sa me telep hone wa ll jack To conn ect: 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the print er to t he po rt of the pr inter. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the answering machine to th e po ...

  • Lexmark 036 - page 93

    Connec ted to dif ferent wa ll jacks To conn ect: 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the print er to t he po rt of the pr inter. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips fo r this s etup: • If yo u hav e only one te leph one n umbe r on yo ur l ine, t hen yo u nee d to s et the ...

  • Lexmark 036 - page 94

    • If you subscribe to a distinctive r ing service provided by your telephone comp any, then make s ure that yo u set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxe s auto mati cally. Setup 3: Printer is sharing the li ne with a telephone subscribed to voice mail s er ...

  • Lexmark 036 - page 95

    Tips fo r this s etup: • This se tup wor ks best if you subs cribe to a dist inctiv e ring se rvice . If you hav e disti nctive rin g servi ce, t hen make sure that yo u set t he correct r ing pattern for the prin ter. Otherwise, th e print er does not r eceive faxes even if you have set it to rece ive fax es au toma ticall y. • If you have onl ...

  • Lexmark 036 - page 96

    A Digital Subsc riber Li ne sp lits your r egular teleph one lin e into tw o channe ls: vo ice and In ternet . Tele phone a nd fax signals travel throug h the v oice c hannel, a nd Inte rnet sig nals p ass thr ough th e other chann el. This way, you can us e the sa me line for analo g voi ce call s (inclu ding faxes) a nd dig ital In ternet acces s ...

  • Lexmark 036 - page 97

    To conn ect: 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the print er to t he po rt of the pr inter. 2 Connect the other end o f the cable to th e port labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port label ed Phone Line 2 or Fax Po rt is no t always ac tive. VoI P providers may cha rge addit ional co st for ...

  • Lexmark 036 - page 98

    Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connec t one e nd of the telepho ne cabl e tha t came wit h your pr inter to the port o f the p rinte r. 2 Connect the other end o f the cable to th e port labeled Phone Line 1 or Phone Port on the cable mod em. Note: The port la ...

  • Lexmark 036 - page 99

    Setup 2: Printer is connected to a wall jac k ; cable modem is installe d elsewhere in the facil ity 1 Connec t one e nd of the telepho ne cabl e tha t came wit h your pr inter to the port o f the p rinte r. 2 Connec t th e other end of the t elephone cabl e to an active analog telep hone wal l jac k. 3 Connec t your analog te lepho ne to the po rt ...

  • Lexmark 036 - page 100

    If the wall jack or equipment in your facility is not compat ible with t his ty pe of connec ti on, th en yo u nee d to use a telepho ne adap ter. An adapte r for yo ur count ry or r egion may not co me wit h your pr inter, and you ma y need to purchas e it separ ately . There may be an adapt er plug i nstal led in th e port of the p rinter. If you ...

  • Lexmark 036 - page 101

    Connecting the printer to a non ‑ RJ ‑ 11 wall jack 1 Connec t one e nd of the telepho ne cabl e tha t came wit h printe r to the port of th e print er. 2 Connect the other en d of the cabl e to the RJ ‑ 11 adapte r, and then connec t the adapte r to the wall ja ck. 3 If you want to co nnect anoth er dev ice (t elephone or an swerin g machin ...

  • Lexmark 036 - page 102

    Connecting the pri nter to a wall jack in Germany The G erman w all jack h as tw o ki nds of port s. Th e N p ort s are fo r fax machines, m odems, and answering machines. The F port is for tel ephones . NF N Faxing 102 ...

  • Lexmark 036 - page 103

    Connect t he printe r to any of the N ports. 1 Connec t one end of t he tel ephone cabl e that c ame th e print er to the port of the pri nter. 2 Connec t th e othe r end of the tele phone cable to the RJ ‑ 11 adapter, a nd then co nnect the a dapter to an N port. 3 If you want to co nnect a telepho ne and answeri ng mach ine to t he same wall ja ...

  • Lexmark 036 - page 104

    Connec ting to a di stinctive ring servic e A distincti ve ring se rvice may be av ailable f rom your tele phone compa ny. This ser vice lets you have multip le teleph one numbers on one telepho ne line , with each tele phone numbe r havin g a differ ent ri ng patt ern. Th is may be useful f or disting uishi ng bet ween fa x and voi ce calls . If y ...

  • Lexmark 036 - page 105

    Notes: • View the IP addres s on the home screen . The IP a ddress a ppea rs as fou r sets o f number s sep arated by perio ds, such as 123.123 .123.123. • If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Sett ing s > Security > Set D ate and Ti me . 3 In the Man ually Set Date & T ...

  • Lexmark 036 - page 106

    Sending a fax using th e compu ter For Windo ws user s 1 With a d ocu ment open, clic k File > Print . 2 Select t he printer, a nd then clic k Properties , Preferen ces , Opti on s , or Se tup . 3 Click Fax > Enable fax , and then enter the recipient fax number o r numbers. 4 If n ece ssa ry, configur e other fax se tti ngs. 5 Apply the chang ...

  • Lexmark 036 - page 107

    Creating shortcuts Notes: • Make su re that Fax Shor tcuts is s et to D isplay . Fro m the ho me screen, to uch > Settings > G enera l Settings > Home screen customization > Fax S hort cuts > Displa y > Submi t . • To dele te a fax shortc ut, tou ch > M anag e Short cuts > Fax Shortcuts > the shor tcut to del ete > ...

  • Lexmark 036 - page 108

    Customizing fax settings Changing the fax resolution 1 Load an o rigina l docum ent fa ceup, sho rt ed ge firs t int o the AD F tray or f acedow n on the scanne r glas s. Notes: • Do not lo ad postc ards, ph otos, s mall it ems, tran spar encies, photo pa per, or thi n media (s uch as maga zine clippings) into the ADF tray. Place these items on t ...

  • Lexmark 036 - page 109

    Notes: • View the printer IP address on the printer home scr een. The IP address appears as four sets of numbers separ ated b y pe riods, such a s 1 23.123.123.123. • If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Sett ing s > Fax Sett ings > Analog F ax S etup > Bl ock No Name F ...

  • Lexmark 036 - page 110

    c From the Ti me me nu, select the tim e you want the he ld faxes release d. d From the D ay(s) me nu, select the day you want the held fax es releas ed. 5 Click Add . Forwarding a fax This op tio n lets you print and forwa rd recei ved faxe s to a fa x num ber, e ‑ mail addres s, FT P si te, o r LDS S. 1 Open a Web browser, and then type the pri ...

  • Lexmark 036 - page 111

    Page Setup This option lets you chang e the follo wing sett ings: • Side s (Dup lex) —This speci fies if the origi nal docume nt is prin ted on one si de or on bo th sides of the page (duplex). This also identifies what needs to be scanned for inclusion in the fax. • Orientat ion —This spec ifies the or ienta tion of the o rigi nal doc umen ...

  • Lexmark 036 - page 112

    Scanning Using Scan to Network Scan to Ne twork lets you s can your doc ument s to n etw ork de stina tio ns spe cifie d by your s ystem supp ort person . Af ter the desti nations ( share d networ k folde rs) have been e stablis hed on the network, the setup pr ocess for the applic ation involve s inst allin g and con figuring the applicat ion on t ...

  • Lexmark 036 - page 113

    Notes: • View the printer IP address on the printer home scr een. The IP address appears as four sets of numbers separ ated b y pe riods, such a s 1 23.123.123.123. • If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Navigate to: Settings > Other Set tings area > Mana ge Sho rtcut s > FTP ...

  • Lexmark 036 - page 114

    Scannin g to a comp uter or flas h driv e Automatic d ocument f eeder (ADF) Scan ner glas s • Use the ADF f or multiple ‑ page or two-sided documents. • Load the orig inal documen t faceup. • Use the scanner glass fo r single ‑ page documents, book pages, small items (such as po stcards or phot os), transparenc ies, photo paper, or thin m ...

  • Lexmark 036 - page 115

    Understanding th e scan options FTP This option lets you enter the IP addr ess for the FTP d estination. Note: An IP addres s appea rs as four sets of nu mbers separ a ted by per i ods, suc h as 123.123.1 23.123. File Name This op tion l ets you typ e a fil e name for the sca n image. Save As Shortcut This op tion lets you sa ve the cu rrent setti ...

  • Lexmark 036 - page 116

    Page Setup This option lets you chang e the follo wing sett ings: • Sides ( Duplex) —This sp ecifi es if the o rigi nal doc ument is print ed on o nly one sid e or o n bo th side s of t he paper . • Orientat ion —This spec ifies the or ienta tion of the o rigi nal doc ument, and th en c hanges the Si des ( Duplex) and Bindi ng settings to m ...

  • Lexmark 036 - page 117

    Understandin g the printer menus Menus list Paper Menu Reports N etwork/Ports Security Default Source Paper Siz e/Type Configure M P Substitute Size Paper Texture Paper Loadi ng Custom Types Custom Names Custom Scan Sizes Custom Bin Names Universal Setup Bin Se tup Menu Settings Page Device S tatistics Staple r Test Network Setup Page Network [x] S ...

  • Lexmark 036 - page 118

    Paper menu Default Sourc e menu Use To Default Source Tray [x] Multipurpose Feeder Manual Paper Manual Envelope Set a default pap er source for all pri nt jobs. Note s: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder to appear as a me nu setting. ? ...

  • Lexmark 036 - page 119

    Use To Tray [x] Type Plain Pape r Card St ock Transparency Recy cled Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Prep rinted Colored Paper Light Pape r Heavy Paper Rough/Cotton Cust om Ty pe [x ] Specify the type o f paper loaded in each tray. Notes: • Plain Paper is the factory default settin g for Tray 1. Custom Type [x] ...

  • Lexmark 036 - page 120

    Use To MP Feeder Type Plain Pape r Card St ock Transparency Recy cled Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Prep rinted Colored Paper Light Pape r Heavy Paper Rough/Cotton Cust om Ty pe [x ] Specify the pap er type loaded in th e multipurpose feeder. Notes: • Plain Paper is t he factory default setting. • From the P ...

  • Lexmark 036 - page 121

    Use To Manual Paper Type Plain Pape r Card St ock Transparency Recy cled Labels Bond Letterhead Prep rinted Colored Paper Light Pape r Heavy Paper Rough/Cotton Cust om Ty pe [x ] Sp eci fy the pa per ty pe be ing ma nua lly loaded . Notes: • Plain Paper is t he factory default setting. • From the Paper menu, set Configure MP to “Manual” for ...

  • Lexmark 036 - page 122

    Subs titu te Si ze m enu Use To Substitute Si ze Off Stat em ent /A5 Letter/A4 11 x 17/ A3 All Liste d Substitute a specified paper size if th e requested paper size is not availabl e. Note s: • All Listed is the factory default setting. All available substitut ions are allowed. • Setting a size substit ution lets the print job continu e withou ...

  • Lexmark 036 - page 123

    Use To Rough Envelope Texture Rough Specify the relative texture of the rough envelopes loaded. Letterhead Texture Smoo th Normal Rough Specify the relative texture of the letterhead loaded. Note: Normal is the factor y default setting. Preprinted Texture Smoo th Normal Rough Specify the relative texture of the pr eprinted paper loaded. Note: Norma ...

  • Lexmark 036 - page 124

    Use To Recycled Loadi ng Duplex Off Determine and set two -sided printin g for all pr int jobs wi th Recycled as the paper type. Glossy Loadin g Duplex Off Determine and set two-sided print ing for al l prin t jobs with Glossy as the paper type. Heav y Gloss y Lo ading Duplex Off Determine and set two-sided printing for all print jobs with Heavy Gl ...

  • Lexmark 036 - page 125

    Custom Ty pes me nu Use To Custom Ty pe [x] Paper Card St ock Transparency Rough/Cotton Labels Envelope Associat e a paper or specialty media ty pe with a factor y default custom type name or a user ‑ defined custom name created from the Embedded Web Server or from MarkV ision TM Professional. Notes: • Paper is the factory defaul t setting. • ...

  • Lexmark 036 - page 126

    Use To Bin [x] Specify a custom name for Bin [x]. Universal Setu p menu Use To Units of Measure Inches Millimete rs Identify the units of measure. Note s: • Inches is the U.S. factory default setting. • Millim eters is the inter national factory defaul t setting. Portrait Width 3.54 –48 inc hes 89.9–1 219 m m Set the portra it width. Note s ...

  • Lexmark 036 - page 127

    Use To Configure Bins Mailbox Link Link Optional Type Assignment Specify configuratio n options for bins. Notes: • Mailbox is the factor y default sett ing. This tre ats each bin as a separate mailbox. • Link configures all avai lable bins as one large bin. • Link Optional l inks together all availabl e bins except the standard bin and only a ...

  • Lexmark 036 - page 128

    Reports menu Reports me nu Use To Menu Settings Page Print a report c ontaining inf ormation about the paper load ed in trays, installed memory, total page count, alar m settings, timeouts, control pan el language, TCP/IP address, status of supplies, stat u s of the network conn ection, and other inf orma tio n. Device Statistics Print a repor t co ...

  • Lexmark 036 - page 129

    Use To Print Dir ectory Print a list o f all the resour ces stored i n an optional fl ash memory card o r printer har d d isk . Note s: • Job Buffer Size must be set to 100%. • Make sure that the flash memory or hard disk is worki ng and installed corr ectly . Asset Report Print a report containing asset in formation i ncludin g the print er se ...

  • Lexmark 036 - page 130

    Use To NPA Mode Off Auto Set the printer to perf orm the special processing requ ired for bidirecti onal communica tion following the convention s defined by the NPA protoco l. Note s: • Auto is t he fac tory default set ting . • The printer automa tically re starts when the setti ng is change d from the control pan el. Network Buffer Auto 3KB ...

  • Lexmark 036 - page 131

    Use To Print Setup Pa ge Pr int a report cont aining inform ation about the netw ork p rinter settings, such as the TCP/IP address. Network Card menu To access the menu, na vigate to either of t he following: • Networ k/Ports > Standa rd Netwo r k > Standa rd Ne twork Se tup > Netw ork Ca rd • Networ k/Ports > Network [x] > Netwo ...

  • Lexmark 036 - page 132

    Use To Gateway View or c hange the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assign ment. Note: On is the factory default setting. Ena ble RA RP On Off Specify the RARP address assig nment setting. Note: Of f is the factory de fault se tti ng. Enable BOOTP On Off Specify the BOOTP address assignment setting. ...

  • Lexmark 036 - page 133

    Use To Enable IPv6 On Off Ena ble IP v6 in the pr inter. Note: On i s the f actory d efault setting. Auto Configuration On Off Specify whether or not the network ada pter accepts the automa tic IPv6 address configuration entries provided by a router. Note: On i s the f actory d efault setting. Set Hostna me Se t the h os t nam e. Note: These settin ...

  • Lexmark 036 - page 134

    Use To Choose N etwork Select an avai lable network for the printer to use. View S ignal Q uality View the quality of the wireless connecti on. View Se curity Mode View the encryption method for the wireless network. AppleT alk menu To access the menu, na vigate to either of t he following: • Networ k/Ports > Standa rd Netwo r k > Standa rd ...

  • Lexmark 036 - page 135

    Use To NPA Mode On Off Auto Set the printer to perf orm the special processing requi red for bidirectional communicat ion following the convention s defined by the NPA protoco l. Note s: • Auto is the factory default setti ng. Auto sets the printer to examine data, determine the format, and then pr ocess it appropriately. • The printer automati ...

  • Lexmark 036 - page 136

    Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway information for an externa l print server. Note : This menu is available only when the prin ter is attached to an extern al print server through the USB port. Parallel [x] menu Note: This menu appears only when an opt ional parallel ca rd is insta lled. Use To PCL SmartS witch On Off Set the printe ...

  • Lexmark 036 - page 137

    Use To Job Buffering Off On Auto Temporarily store print jobs on the printer hard disk before pri nting. Notes: • Off is the fac tory d efaul t setti ng. • On buffers print jobs on the printer hard disk. • Auto buffers print jobs onl y if the printer is busy processing data from ano ther input port. • Changing th is setting from the printe ...

  • Lexmark 036 - page 138

    Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway informa tion for an external print server. Note: This menu item is available onl y if the printer is atta ched to an ex ternal print server through the USB port. Serial [ x] men u Note: This menu appears o nly when an o ptional serial card i s instal led. Use To PCL SmartS witch On Off Set the prin ...

  • Lexmark 036 - page 139

    Use To Seria l Bu ffer Disabled Auto 3K to [maximum size allowed] Set the size of the serial input buffer. Notes: • Auto is the factory default setting. • Disabled turns off job buffer ing. Any jobs already buf fered on the disk are printed before normal processing is resumed. • The serial buffer size setting can be chang ed in 1 ‑ KB incre ...

  • Lexmark 036 - page 140

    Use To Baud 1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600 Specify the rate at which data can be received th rough the serial port. Notes: • 9600 is the factor y defau lt sett ing. • 138200 , 1728 00, 23 040 0, and 345 600 baud r ates ar e only dis play ed in the Standard Serial menu. These settings do not app ear in t ...

  • Lexmark 036 - page 141

    Use To Use SSL Disabled Negotiate Requ ired Set the printer to use SSL for inc reased security when connecting to the SMTP serv er. Note s: • Disabled is the fact ory default sett ing. • When the Negotiate setting is used, the SMTP s e rver determines if SSL will be used. SMTP Server Authentication No authentication required Login/Plai n CRA M ...

  • Lexmark 036 - page 142

    Use To Edit Building Blocks Internal Accou nts NTLM Simple Ker beros Se tup Kerb eros Se tup Active Direct ory LDAP LDAP+ GSSAP I Password PIN Edit settings for Internal Accoun ts, NTLM, Simple Kerberos Setup, Kerb eros Setup, Active Directory, LDAP, Password, and PIN. Edit Securit y Template s [list of available templates] Add or edit a security t ...

  • Lexmark 036 - page 143

    Use To Security Reset Jumper No Effect Access controls= “No Se curity” Reset factory securi ty defaults Adjust the security settings. Notes: • No Effect means the reset has no effect on th e printer security configurati on. • Access control s=’No Secur ity’ retain s all the security informat ion that the u ser has defined. No Security i ...

  • Lexmark 036 - page 144

    Use To Repeat Job Expiration Off 1 hou r 4 hou rs 24 hours 1 week Set a limit on how lo ng the printer stores pri nt jobs. Verify Job Ex piration Off 1 hou r 4 hou rs 24 hours 1 week Set a limit on how lo ng the printer stores pri nt jobs needing verification. Reserve Job Expiration Off 1 hou r 4 hou rs 24 hours 1 week Set a limit on how lo ng the ...

  • Lexmark 036 - page 145

    Security Audit Log menu Use To Export Log Enable an authorized user to expor t the security log. Notes: • To export the log from the pri nter control panel, attach a flash drive to the printer. • To export the log from the Embedded Web Server, downloa d the log to a computer. Delete Log Yes No Specify whether audit logs are del eted. Configure ...

  • Lexmark 036 - page 146

    Use To Configure Log (continued) Admin’s e-mail address [256 charac ter string] Digitall y si gn expor ts Off On Severity of events to log 0–7 Remote Syslog non-lo gged events No Yes E-mail log cle ared alert No Yes E-mail log wrapped alert No Yes E-mail % full alert No Yes % full aler t level 1–99 E-mail log exported a lert No Yes E-mail log ...

  • Lexmark 036 - page 147

    Use To Automatically Observe DST On Off Set the scanner to use the applicab le daylig ht saving time (DST) start and end times associated with the scanner Time Zone setting. Note: On is the factory def ault setting and uses the applicable Daylight Saving Time associated with the Time Zone setting. Custom T ime Zone Setup DST Start Week DST Star t D ...

  • Lexmark 036 - page 148

    Settings menu General Settin gs menu Use To Display L anguage English Francai s Deuts ch Italiano Espanol Dansk Norsk Nederlands Svens ka Portugu ese Suom i Russ ia n Polski Greek Magyar Turkce Cesk y Simpli fied C hinese Traditional Chi nese Korean Japanese Set the language of the text appear ing on the printer display. Note: Not a ll languages ar ...

  • Lexmark 036 - page 149

    Use To Quiet Mode Off On Reduce the amount of nois e produced by the printer. Notes: • Off is the factory default setting. This supports the performance specific ations for your pri nter. • On configures the pri nter to produce as little noise as possible. This is best sui ted for printing text and line art. • For optimal printing of col or ? ...

  • Lexmark 036 - page 150

    Use To Paper Si zes US Metric Specify the default paper measurement. Notes: • US is the factory default setting. • The initial setting is determin ed by your coun try or region selection in the initia l setup wizard. • Changing this setting also cha nges the default setting for each input source in the Pa per Size/Type menu. Scan to PC Port R ...

  • Lexmark 036 - page 151

    Use To Displayed Information (continued) Black To ner Customize the displayed inf ormation for Black Toner. Select fr om the follo wing options: When t o disp la y Do n ot di splay Display Message to Displa y Defa ult Altern ate Defau lt [text entry] Altern ate [text entry] Notes: • Do not display is the factor y default setting for When to displ ...

  • Lexmark 036 - page 152

    Use To Home scr een custom izati on Change Langua ge Cop y Copy Shortcuts Fax Fax Sh ortcuts E ‑ mail E ‑ mail Shortcuts FTP FTP Sh ort cuts Search He ld Job s Held Jobs USB Driv e Profiles and Apps Bookma rks Jobs by user Forms and Favorites Card Cop y Scan to Network MyShortcut Multi Send Change the icons that appear on the home screen. For e ...

  • Lexmark 036 - page 153

    Use To Audio Feedback Button Feed back On Off Volume 1–10 Se t the a udi o vo lum e fo r the bu tton s. Notes: • On is the factory default setting f or Button Feedback. • 5 is the factory default setting f or Volume. Show Bookmarks Yes No Specify whether bookmarks are displayed from the Held Jobs area. Note: Yes is the factory default settin ...

  • Lexmark 036 - page 154

    Use To Timeou ts Standby Mode Dis able d 1–240 Specify the number of minu tes of inactivity before the pri nter enters a lower p ower state. Note: 15 is the factory default setting . Timeou ts Slee p Mod e Dis able d 1–120 Set th e amoun t of ti me i n minu tes the pri nte r wa its af ter a job is printed before it goes into a reduc ed power st ...

  • Lexmark 036 - page 155

    Use To Timeou ts Print Timeout Dis able d 1–255 Set the amount of time in seco nds the printer waits to receive an end ‑ of ‑ job message bef ore canceling the rest of the print job. Notes: • 90 is the factory default setting. • When the timer expires, any partially pri nted page still in the printer is printed, and then the prin ter chec ...

  • Lexmark 036 - page 156

    Use To Print Reco very Jam Reco ver y On Off Auto Specify whether the printer reprin ts jammed pages. Notes: • Auto is the fa ctory defau lt setting. The printer reprints jammed pages unless the memory required to hold the pages is needed f or other printer tasks. • On sets the printer to always repri nt jammed pages. • Off sets the printer t ...

  • Lexmark 036 - page 157

    Use To Factor y Default s Do Not Rest ore Restor e Now Restore the printer settings to the factor y default settings. Notes: • Do Not Restore is the factory default s etting. This ke eps the user ‑ defined settings. • Restore Now returns all printer settings to the factory default settings except Network/Por ts menu settings. All downloads st ...

  • Lexmark 036 - page 158

    Use To Paper Save r Off 2 ‑ up Portrait 2 ‑ up Landscape 4 ‑ up Portrait 4 ‑ up Landscape Copy two or four she ets of a document on on e page. Note: Off is the factory defaul t setting . Print Pa ge Borders On Off Spec if y wh eth er a bor der i s p rin ted . Note: Off is the factory defaul t setting . Coll ate (1,1,1) (2,2,2) (1,2,3) (1,2, ...

  • Lexmark 036 - page 159

    Use To Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Oficio ( Mexico) Universal Auto Si ze Sen se Mixed Sizes A3 A4 A5 A6 JIS B 4 JIS B 5 Custom Scan Size [x] Book Orig inal Busi nes s Card 3 x 5 in . 4 x 6 in . ID Card Specify the p aper size of t he original document. Note: Letter is the U.S. factory d efault setting. A4 is the ...

  • Lexmark 036 - page 160

    Use To Output Bin Standard B in Bin [ x] Specify the bin to be used for the copy job. Notes: • Standard Bin is the factory default settin g. • Bin [x] appears only when at least one optional b in is installed. Numb er o f Co pi es 1–99 99 Specify the number of copi es for the copy job. Note: 1 is the factory default setting . Header/Footer [L ...

  • Lexmark 036 - page 161

    Use To Auto Center Off On Automatical ly center the content on the page. Note: Off is the factory defaul t setting . Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gree n Thre shold 0–255 Default B lue Thresh old 0–255 Specify which c olor to dro p during scanni ng and to adjust the dr opout setting for ...

  • Lexmark 036 - page 162

    Fax Settings menu Fax Mode (Analog Fax Setup) menu Analog F ax Setu p mod e sends t he fa x job t hrough a telepho ne lin e. General Fax Settings Use To Fax Name Spec ify the n ame of th e fa x in the p rint er . Fax Number Spec ify th e n umb er ass ign ed t o the fax. Fax ID Fax Name Fax Number Specify h ow the fax is ide ntifi ed. Note: Fax Numb ...

  • Lexmark 036 - page 163

    Use To Fax Co ver Pag e Fax Cover Page Off by default On by default Never use Alwa ys u se Include to Field On Off Include from Field On Off From Include Message Field On Off Message Include Logo On Off Include Footer [x] On Off Footer [x] Configure the fax cover pag e. Notes: • Off b y defaul t is th e factory defa ult se ttin g for Fax C over P ...

  • Lexmark 036 - page 164

    Use To Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Oficio ( Mexico) Universal Auto Si ze Sen se Mixed Sizes A3 A4 A5 A6 JIS B 4 JIS B 5 Custom Scan Size [x] Book Orig inal Busi nes s Card 3 x 5 in . 4 x 6 in . Spec ify the s iz e of t he or igi na l do cume nt. Note: Mixed Si zes is the U.S . factor y default s etting. A4 is th ...

  • Lexmark 036 - page 165

    Use To Darkness 1–9 Lighten or darken the output . Note: 5 is the factory default setting . Dial P refix Enter a dialin g prefix, such as 99. A nu meric entry field is provided. Dialing Pr efix Rules Prefix Rul e [ x] Establish a d ialing prefix r ule. Automatic R edial 0–9 Specify the number of times the printer tries to send the fax to a spec ...

  • Lexmark 036 - page 166

    Use To Scan Prev iew On Off Specify whether a preview appears on th e display for scan jobs. Notes: • Off is the fac tory d efaul t set ting. • This menu item appears only when a fo rmatted, wor king printer hard di sk is installed. Background Remova l ‑ 4 to 4 Adjust the amount of backgro und visible on a scanned image. Note: 0 is the factor ...

  • Lexmark 036 - page 167

    Use To Temperature ‑ 4 to 4 Specify warm or c ool output s. Cool values gene rate a bluer output than the defau lt while warm values generate a redder output than th e default. Note: 0 is the factory default setting . Enab le Color Fax Scans Off by def ault On by default Never use Always use Enable color faxing . Note: Off by default i s the fac ...

  • Lexmark 036 - page 168

    Use To Separator Sh eets Off Before Job After J ob Enable the printer to inc lude separator sheets for inc oming fax jobs. Note : Off is th e fact ory de fault s etting . Sepa rat or Sh eet So urc e Tray [x] Multipurpose Feeder Specify the paper source for the separator sheet . Note : Tray 1 is the fa ctory defau lt set ting. Output Bin Standard B ...

  • Lexmark 036 - page 169

    Use To Punch Off On Specify whether prints are punched. Note s: • Off is th e facto ry default set ting. • This menu i tem appears only when a st aple, hole punc h finisher is installed. Staple Off 1 stap le 2 stap les 4 stap les Specify whether prints are stapled. Note s: • Off is th e facto ry default set ting. • This menu item appe ars o ...

  • Lexmark 036 - page 170

    Use To Log Output Bin Standard B in Bin [ x] Specify the bin for the printed fax logs. Note : Standard Bin is the factory default setting. Speaker Settings Use To Speaker Mode Alwa ys Of f On until Connected Alwa ys On Specify the mode of the speaker. Note : On until Connected is the factor y default setting. A sound is issued until the fax connect ...

  • Lexmark 036 - page 171

    Use To Forma t PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.j pg) XPS ( .xps ) Specify the format of the scanned file. Note: PDF (.pdf) is the fa ctory default setting. PDF Vers ion 1.2–1. 7 A–1a Set the version of the PDF file that is scan ned for e ‑ mailing. Note: 1.5 is the fact ory de fault set ting. Content Type Text Graphics Text/Photo Pho ...

  • Lexmark 036 - page 172

    Use To Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Oficio ( Mexico) Universal Auto Si ze Sen se Mixed Sizes A3 A4 A5 A6 JIS B 4 JIS B 5 Custom Scan Size [x] Book Orig inal Busi nes s Card 3 x 5 in . 4 x 6 in . Specify the size of the document being scanned. Note: Letter is the U.S. factory d efault setting. A4 is the internatio ...

  • Lexmark 036 - page 173

    Use To E ‑ mail imag es se nt as Atta chmen t Web Link Specify how the images are sent. Note: Att achment is th e factor y default s etting. Use Multi ‑ Page Tiff On Off Choose between single-page TIFF files and multiple ‑ page TIFF files. Fo r a multipl e- page scan ‑ to ‑ e-mail job, either one TIFF file is created contai ning all the p ...

  • Lexmark 036 - page 174

    Use To Background Remova l ‑ 4 to 4 Adjust the amount of backgr o und visible on a scanned image. Note: 0 is the fa ctory d efaul t settin g. Color Balance Cya n - Re d Magenta - Green Yellow - Blue Enable an equal balance of colors in the scan ned image. Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gre ...

  • Lexmark 036 - page 175

    FTP Settings menu Use To Forma t PDF (.pdf) Secure PDF ( .pdf) TIFF (.tif) JPEG (.j pg) XPS ( .xps ) Specify the format of the file for FTP sending. Note: PDF (.pdf) i s the factory default setting. PDF Vers ion 1.2–1. 7 A–1a Set the version level of th e PDF file for FTP sending. Note: 1.5 is the fact ory de fault set ting. Content Type Text G ...

  • Lexmark 036 - page 176

    Use To Orig inal Si ze Letter Legal Executive Folio Stat em ent Oficio ( Mexico) Universal Auto Si ze Sen se Mixed Sizes A3 A4 A5 A6 JIS B 4 JIS B 5 Custom Scan Size [x] Book Orig inal Busi nes s Card 3 x 5 in . 4 x 6 in . Specify t he si ze of the or iginal do cument. Note: Letter is the U.S. factory d efault setting. A4 is the internat ional fact ...

  • Lexmark 036 - page 177

    Use To Use Multi ‑ Page TIFF On Off Provide a cho ice betwee n single-p age TIFF fi les and multi ple ‑ page TIFF files . For a mult ip le-p age sca n ‑ to ‑ FTP job, either on e TIFF file is created co ntaining all the pages, or multiple TIFF fi les are created wi th one file for eac h page of the job. Notes: • On is the factory default ...

  • Lexmark 036 - page 178

    Use To Color Balance Cya n - Re d Magenta - Green Yellow - Blue Enable an equal balance of colors in the sca nned image. Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gree n Thre shold 0–255 Default B lue Thresh old 0–255 Specify which color to drop dur ing scanning and to ad just the dropout setting f ...

  • Lexmark 036 - page 179

    Flash Drive me nu Scan Settings Use To Forma t PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.j pg) XPS ( .xps ) Specify the format of the file to be sent through FT P. Note : PDF (.pdf) is the factory d efault setting. PDF Vers ion 1.2–1. 7 A–1a Set the version of the PDF fil e to be sent through FTP. Note : 1.5 is t he fa ctor y defa ult set ting . ...

  • Lexmark 036 - page 180

    Use To Orig inal Si ze Letter Legal Executive Folio Stat em ent Oficio ( Mexico) Universal Auto Si ze Sen se Mixed Sizes A3 A4 A5 A6 JIS B 4 JIS B 5 Custom Scan Size [x] Book Orig inal Busi nes s Card 3 x 5 in . 4 x 6 in . Specify the size of the original document. Note : Letter is the U.S. factory default settin g. A4 is the internatio nal factory ...

  • Lexmark 036 - page 181

    Use To Use Multi ‑ Page TIFF On Off Provide a choice between single-pag e TIFF files and multiple ‑ pa ge TIFF files . For a multiple-page sca n to FTP job, either one TIFF file is created co ntaining all the pages, or multiple TIFF file s are creat ed with one fi le for ea ch page. Note s: • On is the factory default setting. • This menu a ...

  • Lexmark 036 - page 182

    Use To Contra st 0–5 Best f or con tent Specify the contrast o f the scanned image. Note : Best for conten t is the factory defaul t setting. Mirror I mage Off On Create a mirror image of th e original document. Note : Off is t he facto ry default setting. Negative Image Off On Create a negative i mage of the origi nal document. Note : Off is t h ...

  • Lexmark 036 - page 183

    Hole Punch Off On Specify whether prints have pu nched holes. Notes: • Off is the factory default setting. • This menu item appears only when a supported staple, hol e punch finisher is install ed. Hole Punch Mode 2 hole s 3 hole s 4 hole s Specify the number of holes to be mad e on the prints. Notes: • 3 holes is the U.S. fact ory default se ...

  • Lexmark 036 - page 184

    Separator Sh eets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to (1,2,3) (1,2,3). If Collate is set to (1,1,1) (2,2,2), then a blank page is inserted betwee ...

  • Lexmark 036 - page 185

    Use To Print Area Normal Whole Pa ge Set the logical a nd physical printabl e area. Notes: • Normal is the facto ry default setting. When attemptin g to print data in the non ‑ p rintable area defined by th e Normal setting, the prin ter clips the ima ge at the boun dary. • Whol e Page al lows the im age to be m ove d int o t he non ‑ print ...

  • Lexmark 036 - page 186

    Finishing menu Use To Sides (Duplex) 1 sid ed 2 sid ed Spec if y wh et her tw o ‑ sided printing is set as the default for all print jobs. Notes: • 1 si ded is the factor y de fau lt set ting . • You can set two ‑ sided printin g from the printer software. Duplex Binding Long Edge Short Edg e Define th e way two ‑ sided pages are bound an ...

  • Lexmark 036 - page 187

    Use To Paper Save r Off 2 ‑ Up 3 ‑ Up 4 ‑ Up 6 ‑ Up 9 ‑ Up 12 ‑ Up 16 ‑ Up Print multiple ‑ page images on on e side of a paper. Notes: • Off is the fac tory d efaul t setti ng. • The number selected is the number of page images that a re printed per side. Paper Saver Or dering Horizontal Reverse Hori zontal Reverse Vertical Ver ...

  • Lexmark 036 - page 188

    Use To Hole Punch Mode 2 hole s 3 hole s 4 hole s Specify the number of holes to be created on pri nted outputs for the purpose of collect ing the shee ts in a binder or f older. Notes: • 3 holes is the U.S. facto ry default settin g. 4 h oles is the interna tional fac tory default setting. • This menu appears only when a supported staple, hole ...

  • Lexmark 036 - page 189

    Use To Enhance Fine Lines On Off Enable a prin t mode prefera ble for fi les such as architec tural drawings , maps, electr ical circuit diag rams, and flow charts. Notes: • Off is the fac tory d efaul t setti ng. • You can set this option fr om the printer software. For Windows users, click File > Prin t , and then click Proper ties , Prefe ...

  • Lexmark 036 - page 190

    Use To Log Ac tion at Near Full None E ‑ mail Current Log E ‑ mail & Delete Current Log E ‑ mail & Delete Oldest Log Post Curr ent Log Post & Dele te Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest L og Delete All Lo gs Delete All But Current Determine and set how the printer responds when the hard disk i ...

  • Lexmark 036 - page 191

    Use To Forma t Fl ash Yes No Format the flash memor y. Warni ng— Pote ntia l Da mage: Do not turn off the printer whil e the flash memory is being formatted. Notes: • Yes delete s all da ta sto red in f lash me mory. • No cancels the format request. • Flash memory refers to the memory adde d by installing a flash memory card in the printer. ...

  • Lexmark 036 - page 192

    Use To Annotations Do Not Print Print Print annotati ons in a PDF. Note : Do Not Pri nt is the factory default setti ng. PostScript menu Use To Print PS Error On Off Print a page containing the P ostScript error. Note : Off is th e facto ry default setting. Lock PS Startup Mode On Off Disable the SysStart file. Note : Off is th e facto ry default s ...

  • Lexmark 036 - page 193

    Use To Symbol Se t 10U PC ‑ 8 12U PC ‑ 850 Specify the symbol set for eac h font name. Note s: • 10U PC ‑ 8 is the US factor y defau lt set ting . 12U PC ‑ 850 i s th e inte rnat iona l factory d efault setting. • A symbol set is a set of alphabeti c and numeric char acters, punctuation, and special sy mbols. Symbol sets support the di ...

  • Lexmark 036 - page 194

    Use To PCL Emulation Settings Auto CR after LF On Off Specify whether the pri nter automatical ly performs a carriage retur n (CR) after a line feed (LF ) control command. Note : Off is th e facto ry default setting. PCL Emulation Settings Auto LF after CR On Off Specify whether the printer automatical ly performs a line feed ( LF) after a carriag ...

  • Lexmark 036 - page 195

    HTML menu Use To Font Name Albertus MT Antiq ue Ol ive Appl e Cha ncery Arial MT Avant Garde Bodoni Bookma n Chi cago Clarendon Coop er B lac k Copperplate Coro net Cou rier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers Joanna MT Lett er G ot hi c Lubalin Graph Marigold MonaLisa Rec ut Mona ...

  • Lexmark 036 - page 196

    Use To Margin S ize 8–25 5 mm Set the page margi n for HTML documents. Note s: • 19 mm is the factory default setting. • Margin size can be increased in 1 ‑ mm increments. Backgrounds Do Not Print Print Specify whether to print backgrounds on HTML documents. Note : Print is the factory def ault setting. Image m enu Use To Auto Fit On Off Se ...

  • Lexmark 036 - page 197

    Menu item Description Print Defects Guide Provides a template for determin ing the cause of repeating print quality defects, and lists settings that can be used to adjust print qua lity Inform ation Guide Provides help in loc ating add itional inform ation Supplies Guid e Provides inf ormation about ordering supplies Underst anding the print er men ...

  • Lexmark 036 - page 198

    Saving money and the environment Lexmark is co mmitted to environ mental s ustainabi lity and is cont inually im proving its pri nters to r educe their impact on the environment. We design with the environment in mind, engin eer our packaging t o reduce materials, and provide coll ecti on and recy cling pr ogra ms. Fo r more infor mati on, see: • ...

  • Lexmark 036 - page 199

    Avoid paper jams Correctl y set the pap er type a nd size to a void pap er jams. For m o re informa tion, see “Avoiding jams” on page 242 . Saving energy Using Hi bernate mode Hibernate is an ultra ‑ low ‑ power operatin g mode. Notes: • Three da ys is the de fault amount of tim e before t he prin ter ente rs Hiber nate mod e. • Make su ...

  • Lexmark 036 - page 200

    Adjust ing Sleep mode 1 From the home s cre en, n avig ate to : > Set tin gs > General S ettings > Timeouts > Slee p Mode 2 In the Sleep Mode field, select th e number of minu tes the printer is idle before it enter s Sleep mode. 3 Apply the changes. Adjusting the b rightness of the printer d isplay To sa ve e nergy , or if you have tro ...

  • Lexmark 036 - page 201

    Recycling Lexmark packaging Lexmark cont inually s trives to m inimize pac kaging. Less pac kaging helps to ensure th at Lexmark p rinters a re transpo rted in the most efficient and environmentally sensitiv e manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy sav ings, and natur a ...

  • Lexmark 036 - page 202

    Securin g the printer Using the security lock feature The printer is equipped with a security lock feature. Wh en a lock compati ble with most laptop com puters is attac hed, the printer is locked. When l ocked, th e controller board shield and the co ntroller bo ard cann ot be removed. At tach a securi ty lock to the pr inter in the l ocati on sho ...

  • Lexmark 036 - page 203

    In hig h ‑ securi ty env ironment s, it may be necessa ry to take ad ditio nal ste ps to make sure tha t confi dential data sto red in the printer hard dis k canno t be acc ess ed when t he prin ter—or its ha rd di sk—is r emoved f rom yo ur premi ses. • Degaus sing —Flushes the hard disk with a magnetic fiel d th at erases stor ed data ? ...

  • Lexmark 036 - page 204

    Configurin g printer hard disk encryption Enable hard disk encryption to prevent loss of sensitive dat a in the event the printer or its hard disk is st olen. Note: Some pr inter mo dels may no t have a hard d isk ins talled. 1 Turn off th e prin ter. 2 From the co ntrol panel , hold down 2 and 6 while turning the printer on. Release th e buttons o ...

  • Lexmark 036 - page 205

    Maintaining the printer Warn ing —Pot ent ial D amag e: F ailur e to m aintai n optim um pr inter perfor mance, or t o repla ce par ts and su pplie s, may c ause damag e to your pr int er. Cleaning printer parts Cleaning th e printe r Note: You m ay nee d to perfor m th is tas k aft er e very few m onth s. Warn ing —Pot ent ial D amag e: D amag ...

  • Lexmark 036 - page 206

    2 Wip e the a reas s hown w ith a s oft or lint ‑ free cloth. 1 White underside of the scanner cover 2 Scanner glass 3 ADF glas s 4 White underside of the ADF cover 3 Clos e the scanne r cov er. Cleaning th e charger and the printh ead len s 1 Open t he bo ttom front door . Maintai ning the pr inter 206 ...

  • Lexmark 036 - page 207

    2 Remove the wa ste to ner bo ttle. 3 Locate the white tab. 4 Gently p ull the tab until it stop s, and then slowly s lide it bac k into pla ce. Repeat three time s. Maintai ning the pr inter 207 ...

  • Lexmark 036 - page 208

    5 Remove the prin thead wiper. 6 Insert the wiper int o the hole until it stops , and then slide it out. Repeat th ree times. 7 Put the wi per bac k to its ho lder. 8 Reinsta ll the w aste to ner bo ttle. 9 Clos e th e bott om f ront d oor . Maintai ning the pr inter 208 ...

  • Lexmark 036 - page 209

    Emptying the hole pu nch box 1 Open doo r H. 2 Remove a nd empt y the ho le punch box. Maintai ning the pr inter 209 ...

  • Lexmark 036 - page 210

    3 Reinst all t he hole pu nch box. 4 Clos e door H. Checking the stat us of parts and s upplies A message app ears on the disp lay when a replacement supply item is neede d or when maintenanc e is required. Checki ng the status of parts and sup plies on the prin ter control panel From th e home scr een, touch Statu s/S uppli es > Vi ew Suppl ies ...

  • Lexmark 036 - page 211

    The accu racy o f the es tima ted num ber of remai ning p ages m ay decreas e when the act ual prin ting consu mption is diff erent fro m the hist orical pr intin g consum ption . Consid er the v ariabl e level of accuracy bef ore pu rchas ing or re placi ng supplie s base d on the e stimat e. Unt il an a dequate p rint his tory is obtai ned on the ...

  • Lexmark 036 - page 212

    Ordering staple cartridges Item Part number Staple car tri dges 25A001 3 Ordering a 300K maintena nce kit Note: To replace the parts included in the maintenance kit, see the instruction sheet that came with each part. Item Part number Mainte nance kit 40X96 69 Storing parts and supplies Storing su pplie s Choose a cool , cle an stor age are a for t ...

  • Lexmark 036 - page 213

    Replacing supplies Replacing a photocond uctor uni t 1 Open t he bo ttom front door . 2 Remove the wa ste to ner bo ttle. Maintai ning the pr inter 213 ...

  • Lexmark 036 - page 214

    3 Unloc k the photo conduct or uni t. 4 Remov e the photoc onduct or unit. 5 Unpack the new photoc onduct or unit . Warning—Pote ntial Da mage: Do not expo se the phot ocon ductor unit to di rect light for m ore than 10 m inutes. Extended exposur e to li ght may ca use pri nt qua lity proble ms. Warning—Pote ntial Da mage: Do not touch the ph o ...

  • Lexmark 036 - page 215

    7 Lock the photo condu ctor uni t. 8 Reinsta ll the w aste to ner bo ttle. 9 Clos e th e bott om f ront d oor . Replacing the staple cartridge Replacing the staple cartridge in the staple finisher Note: The staple finis her is su pported on ly in selec t printer models. 1 Press the latch on the staple finisher, and then slide th e finisher to the l ...

  • Lexmark 036 - page 216

    2 Remove the staple cartridge holder . 3 Remove the empty staple cartridge from th e cartridge holder. 4 Insert the n ew cartrid ge into the car tridge holde r. Maintai ning the pr inter 216 ...

  • Lexmark 036 - page 217

    5 Push the cart ridge holder into th e finisher unti l the holder clicks into place. 6 Slide the finisher back into place. Maintai ning the pr inter 217 ...

  • Lexmark 036 - page 218

    Replacing the staple cartridge in the booklet finisher 1 Open door H, an d then pull ou t the bo oklet make r. 2 Remove the staple cartridge holder . Maintai ning the pr inter 218 ...

  • Lexmark 036 - page 219

    3 Remove the empty staple cartridge from th e cartridge holder. 4 Insert the n ew cartrid ge into the car tridge holde r. 5 Push the cart ridge holder into the booklet maker u ntil the holder clicks into pla ce. 6 Push the booklet m aker back into place, and then close the door. Maintai ning the pr inter 219 ...

  • Lexmark 036 - page 220

    Replacing the staple cartridge in the st aple, hole punch finisher 1 Open doo r H. 2 Remove the staple cartridge holder . 3 Remove the empty staple cartridge from th e cartridge holder. Maintai ning the pr inter 220 ...

  • Lexmark 036 - page 221

    4 Insert the n ew cartrid ge into the car tridge holde r. 5 Push the cart ridge holder into th e finisher unti l the holder clicks into place. 6 Clos e door H. Replacing the toner cartridge 1 Open the to p front do or. 2 Rotate th e toner cartri dge coun terc lockw ise, and then pu ll it out . Maintai ning the pr inter 221 ...

  • Lexmark 036 - page 222

    3 Unpack the new tone r cartri dge, remove th e packi ng materia l, and th en shake th e cartrid ge to redis tribute th e toner. 4 Insert the t oner cart ridge into t he printer. 5 Rota te the c artridg e c lockwis e to lock i t into place. Maintai ning the pr inter 222 ...

  • Lexmark 036 - page 223

    6 Clos e th e top f ront door . 7 Clean the charger and the printhead lens. For more inform ation, see “Cleaning the charger and the printhead lens ” on page 20 6 . Replac ing the waste tone r bottle 1 Open t he bo ttom front door . Maintai ning the pr inter 223 ...

  • Lexmark 036 - page 224

    2 Remove the wa ste to ner bo ttle. 3 Clean the charger and the printhe ad lens. Fo r more inf ormati on, se e steps 3–7 of “Cleanin g the charger and the printh ead lens” o n page 206 . 4 Unpack the new waste toner bottle. 5 Inse rt the new waste t oner bo ttle into th e printer un til it clicks into place. 6 Clos e th e bott om f ront d oor ...

  • Lexmark 036 - page 225

    Replacing the 300K maintenance kit Replacing the exh aust and ozone filters 1 Exhaust filter 2 Ozone filter Replacing the exhaust filt er 1 Pull out the exhaus t f ilter. 2 Unpack the new exhaust filter. Maintai ning the pr inter 225 ...

  • Lexmark 036 - page 226

    3 Insert the new filter. Replacing the ozone filter 1 Pul l out the oz one filt er. 2 Unpack the new ozone fi lter. 3 Insert the new filter. Maintai ning the pr inter 226 ...

  • Lexmark 036 - page 227

    Replacing the pic k, feed, and separator rollers 1 Pick rolle r 2 Feed roller 3 Separator roller Note: You can use the rollers st ored in the comp artment inside the st andard trays. For more information, see “Sto ring the roll ers ” on page 212 . 1 Turn off th e prin ter. Maintai ning the pr inter 227 ...

  • Lexmark 036 - page 228

    2 Remove all trays. • Standar d tray • Optional 2 x 500 ‑ or 2 500 ‑ sheet tray Note: To remo ve the option al 2 x 5 00 ‑ she et t ray , fol low the proc edur e in remo vi ng th e standa rd tray . 3 Open door C. Make s ure th at it doe s not hit any c able atta ched to the pr inter. Note: If the 3000 ‑ sheet tray is inst alled, slide th ...

  • Lexmark 036 - page 229

    4 Open doo r D . Notes: • You can o nly ope n door D if th e opt ional 2 x 500 ‑ or 2500 ‑ sheet tray is inst alled. • If the 3000 ‑ sheet tray is installed, slide the tray to op en the door. 5 Locate the rollers. Maintai ning the pr inter 229 ...

  • Lexmark 036 - page 230

    6 Remove the ro llers. 7 Insert the n ew rollers un til they click into place. Note: Make sure to insert the rollers to t heir right places. 8 Clos e door s C and D. 9 Inse rt the tra ys. Replacing the transfer mod ule Note: Use t he scr ewdriv er locat ed i nside t he bo ttom f ront door of the p rint er. Maintai ning the pr inter 230 ...

  • Lexmark 036 - page 231

    1 Turn off th e prin ter. 2 Open door C. Make s ure th at it doe s not hit any c able atta ched to the pr inter. CAUTION —HOT SU RFACE: The inside of the pr inter might be hot. To r educe t he risk of injury f rom a hot component, allow the s urface to cool before t ouching it. Note: If the 3000 ‑ sheet tray is inst alled, then slide the tray t ...

  • Lexmark 036 - page 232

    4 Loosen the screws o f the transfe r module lock. 5 Remove t he pape r guide. 6 Lift the trans fer mo dule us ing the handles , and t hen pull it out c omplet ely. 7 Unpack the n ew tr ansfer mod ule. Warning—Pote ntial Da mage: Do not expo se the trans fer be lt to di rec t ligh t for more than 10 minute s. Extended exposur e to li ght may ca u ...

  • Lexmark 036 - page 233

    Warning—Pote ntial Da mage: Do not t ouch the trans fer belt. Doing so may affect the print quality of futu re print jo bs. 8 Insert the ne w trans fer mo dule unt il it cl ic ks in to place. 9 Place the paper guide back into place. 10 Tighten the screws of the tran sfer module lock. 11 Reinst all t he door stoppe r. 12 Clos e door C. Replacing t ...

  • Lexmark 036 - page 234

    2 Pull out the trans fer roll er. 3 Unpack the ne w trans fer roller. 4 Insert t he new transfer roller unti l it clicks into place. 5 Clos e door C. Resetting the maintenance co unter 1 Turn off th e prin ter. 2 From the co ntrol panel , hold down 2 a nd 6 while turning the printer on . Release the buttons when the screen with the progress bar app ...

  • Lexmark 036 - page 235

    Replacing the ADF s can pa d 1 Open t he sc anner cover. 2 Remove the ADF scan pad. 3 Unpac k the new ADF scan pad, a nd th en rem ove the pack in g mater ials. Maintai ning the pr inter 235 ...

  • Lexmark 036 - page 236

    4 Lay the ADF scan pad flat on the scanner glass with the white area facedown. 5 Close the scanner cover to st ick the ADF scan pad to the cov er, and then open the cover . 6 Push the corn ers of the ADF scan pad to s ecure it into place. 7 Clos e the scanne r cov er. Maintai ning the pr inter 236 ...

  • Lexmark 036 - page 237

    Moving the printer CAUTION—PO TENTIAL IN JURY: Th e print er we ight is great er tha n 18 kg (40 lb) and r equire s two or mor e trained p ersonnel to lift it safely. Before moving the printer CAUTION—PO TENTIAL IN JURY: Befo re moving the print er, fol low these g uidelines t o avoid per sonal injur y or printer damage : • Turn off the print ...

  • Lexmark 036 - page 238

    • If ne cessar y, use a car t with a s urface larg e enou gh to suppo rt th e fu ll dim ensi ons of the pr inter . • Keep the pr inter in an u prigh t positi on. • Avoid jarr ing movement s. Shippin g the printer When shipping the print er, use the original packaging. Maintai ning the pr inter 238 ...

  • Lexmark 036 - page 239

    Managing the printer Checking the virtua l display 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: • View the printer IP address on the printer home scr een. The IP address appears as four sets of numbers separ ated b y pe riods, such a s 1 23.123.123.123. • If you are using a proxy se rver, then tempo ...

  • Lexmark 036 - page 240

    Copying prin ter settings to other printers Note: This feature i s available on ly in networ k printers. 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: • View the printer IP address in the TCP/IP sect ion in the Network/P orts menu. The IP addres s appea rs as fo ur sets of numbers sep arated by periods, ...

  • Lexmark 036 - page 241

    Notification Description Non Continuable Stop 1,2 The printer stops pro cessing jobs when the supp ly con dition is reached. The supp ly must be replaced to continue pri nting. 1 The printer generates an e-mail about the status of the supply when supply notifica tion is enabled. 2 The printer stops when some supplie s become empty to prevent damage ...

  • Lexmark 036 - page 242

    Clearin g jams Car efu lly s elect pa pe r and spe cia lty me di a, an d then lo ad t hem properl y to avoi d mos t jam s . If jams occur, then follow the steps outlined in this chapter. Note: Jam Reco very is set to Au to by d efault. The prin ter re prints jammed pag es unle ss the mem ory requi red to hold the pages is needed for other printer t ...

  • Lexmark 036 - page 243

    • Flex, fan, and s traighte n pape r before loading it. • Do not use pap er tha t has been cut or tri mmed by h and. • Do n ot mix pa per siz es, weig hts, or typ es i n the sa me t ray. • Make s ure the pa per size a nd type a re set correct ly on t he comput er or printer contr ol pane l. • Stor e paper acc ordi ng to manuf actu rer re ...

  • Lexmark 036 - page 244

    Area name 6 Door H 7 Finisher bi ns 8 Door J 9 Area G Area name Control panel message What to do ADF [x]-page jam, press latch at area E to open ADF's t op cover . [28y. xx] Open the ADF to p door, and then remove the jammed paper. Multipurpose feeder [x] ‑ page jam, clear jammed paper from the multipurpose feeder . [200.xx] Remove the jamme ...

  • Lexmark 036 - page 245

    [x] ‑ page jam, clear jamm ed paper from multipu rpose feeder. [200.xx] 1 Remove all paper from the mu ltipurp ose feeder. 2 Remove t he jamm ed paper . 3 Open door C to re move any pape r frag men ts. Note: Make sure that door C does not h it any cable attached to the printer. 4 Clos e door C. 5 Flex the sheets ba ck and forth to loosen the m, a ...

  • Lexmark 036 - page 246

    • Fuser area • Below the fuser area • Duplex area • Above the duplex area Clearing jams 246 ...

  • Lexmark 036 - page 247

    3 Open the st andard trays, and th en locate the jam med pap er. 4 Remove t he jamm ed paper . Note: M ake sure tha t all paper fragmen ts are removed. 5 Clos e the trays and do or C. [x] ‑ page jam, slide the 3000 ‑ sheet tray and open door C. [2yy.xx] 1 Slide the 3000 ‑ sh eet tray. Clearing jams 247 ...

  • Lexmark 036 - page 248

    2 Open door C. Make s ure th at it doe s not hit any c able atta ched to the pr inter. 3 Remove the ja mmed pape r from an y of the foll owing l ocation s: Note: M ake sure tha t all paper fragmen ts are removed. CAUTION —HOT SU RFACE: The inside of the pr inter might be hot. To r educe t he risk of injury f rom a hot component, allow the s urfac ...

  • Lexmark 036 - page 249

    • Duplex area • Above the duplex area 4 Open the st andard trays, and th en locate the jam med pap er. 5 Remove t he jamm ed paper . Note: M ake sure tha t all paper fragmen ts are removed. 6 Clos e the trays and do or C. 7 Slide the 3000 ‑ sh eet tray back into place. [x] ‑ page jam, open doo r D and clea r all ja mmed paper. [24y.xx] 1 Op ...

  • Lexmark 036 - page 250

    Note: M ake sure tha t all paper fragmen ts are removed. 2 Open the optio nal t ray, and th en lo cate the j ammed pape r. 3 Remove t he jamm ed paper . Note: M ake sure tha t all paper fragmen ts are removed. 4 Clos e the tray and door D. Clearing jams 250 ...

  • Lexmark 036 - page 251

    [x] ‑ page jam, slide the 3000 ‑ sheet tray and open door D. [24y.xx] 1 Slide the 3000 ‑ sh eet tray. 2 Open door D, and then re move the jammed pap er. Note: M ake sure tha t all paper fragmen ts are removed. 3 Open the optio nal t ray, and th en lo cate the j ammed pape r. 4 Remove t he jamm ed paper . Note: M ake sure tha t all paper fragm ...

  • Lexmark 036 - page 252

    5 Clos e the tray and door D. 6 Slide the 3000 ‑ sh eet tray back into place. [x] ‑ page jam, slide the 3000 ‑ sheet tray and open door F. [24y.xx] 1 Slide the 3000 ‑ sh eet tray. 2 Remove t he jamm ed paper . Note: M ake sure tha t all paper fragmen ts are removed. Clearing jams 252 ...

  • Lexmark 036 - page 253

    3 Open door F, and then remove th e jammed paper. Note: M ake sure tha t all paper fragmen ts are removed. 4 Clos e door F. 5 Open door C. Make s ure th at it doe s not hit any c able atta ched to the pr inter. 6 Remove the ja mmed pape r from an y of the foll owing l ocation s: Clearing jams 253 ...

  • Lexmark 036 - page 254

    Note: M ake sure tha t all paper fragmen ts are removed. CAUTION —HOT SU RFACE: The inside of the pr inter might be hot. To r educe t he risk of injury f rom a hot component, allow the s urface to cool before t ouching it. • Fuser area • Below the fuser area • Duplex area Clearing jams 254 ...

  • Lexmark 036 - page 255

    • Above the duplex area 7 Close door C, and then slide the 3000 ‑ sheet tray ba ck into place. [x] ‑ page jam, open doo rs G, H, and J an d clear jammed pap er. Leave paper in bin. [4yy.xx] 1 Open door G, and then remove the jammed paper. Note: M ake sure tha t all paper fragmen ts are removed. 2 Open do or J, and t hen lif t handle J1 to its ...

  • Lexmark 036 - page 256

    3 Open doo r H. 4 Remove the ja mmed pape r from an y of the foll owing l ocation s: Note: M ake sure tha t all paper fragmen ts are removed. • Door J Note: If there is a jammed paper between the finisher bins, th en remove the pap er. Clearing jams 256 ...

  • Lexmark 036 - page 257

    • Areas H1 and H2 • Areas H3 and H4 • Area H6 5 Clos e Door H. 6 Open door C, a nd then remove t he jamm ed pape r. Note: Make sure that door C does not h it any cable attached to the printer. Clearing jams 257 ...

  • Lexmark 036 - page 258

    Notes: • Make sure that all paper fragm ents a re rem oved. • If the 3000 ‑ sheet tray is installed, then slide t he tray to the right to op en the door. 7 Clos e door C. [x] ‑ page jam, press lat ch to acces s area G. Leave pap er in bin. [40y.xx] 1 Remove all pa per from the st aple finisher bin. Clearing jams 258 ...

  • Lexmark 036 - page 259

    2 Press the latch and slide the staple finisher to the left, and then remove the jammed paper. Notes: • Make sure that all paper fragm ents a re rem oved. • If necessar y, turn spi nner w heel G1 downward to fee d jammed pa per in to th e finisher bin, a nd then re move the pape r. Clearing jams 259 ...

  • Lexmark 036 - page 260

    3 Slide the finisher back into place. 4 Open door C, a nd then remove t he jamm ed pape r. CAUTION —HOT SU RFACE: The inside of the pr inter might be hot. To r educe t he risk of injury f rom a hot component, allow the s urface to cool before t ouching it. Notes: • Make sure that door C does no t hit an y cable at tached to the pr inter. • Ma ...

  • Lexmark 036 - page 261

    [x] ‑ page jam, press lat ch to acces s area G and clear jam med staples. Leave pa per in b in. [40 2.93] 1 Remove all pa per from the st aple finisher bin. 2 Press the latch on the staple finisher, and then slide th e finisher to the left. 3 Remove the staple cartridge holder . Clearing jams 261 ...

  • Lexmark 036 - page 262

    4 Use the meta l tab to lift the stapl e guard, and then remo ve any loose s taples. 5 Press the st aple gu ard down until it cli cks int o pla ce . 6 Press the st aple s agai nst the meta l brac ket. Note: If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the st aples near the meta l brack et. Clearing jam ...

  • Lexmark 036 - page 263

    7 Push the cart ridge holder into th e finisher unti l the holder clicks into place. 8 Slide the finisher back into place. Clearing jams 263 ...

  • Lexmark 036 - page 264

    [x] ‑ page jam, open doo r H and ro ta te kn ob H6 c lockw ise. Leav e paper in bin. [426.xx–428.xx] If the jam med pa per is located unde r door G , the n open the doo r and r emove the paper . 1 Open do or J, and t hen lift handle J1. 2 Open doo r H. Clearing jams 264 ...

  • Lexmark 036 - page 265

    3 Remove the ja mmed pape r from an y of the foll owing l ocation s: Note: M ake sure tha t all paper fragmen ts are removed. • Door J Note: If there is a jammed paper between the finisher bins, th en remove the pap er. • Areas H1 and H2 Clearing jams 265 ...

  • Lexmark 036 - page 266

    • Areas H3 and H4 • Area H6 4 Using han dle H5, pull out the b ooklet ma ker. 5 Remove the ja mmed pape r from an y of the foll owing l ocation s: Note: M ake sure tha t all paper fragmen ts are removed. Clearing jams 266 ...

  • Lexmark 036 - page 267

    • Area H8 • Area H9 Clearing jams 267 ...

  • Lexmark 036 - page 268

    • Area H10 6 Push th e bookl et maker back in to pla ce. 7 Clos e door H. 8 Open door C, a nd then remove t he jamm ed pape r. CAUTION —HOT SU RFACE: The inside of the pr inter might be hot. To r educe t he risk of injury f rom a hot component, allow the s urface to cool before t ouching it. Notes: • Make sure that door C does no t hit an y c ...

  • Lexmark 036 - page 269

    [x] ‑ page jam, press lat ch at area E to open ADF’s top cover. [28y.xx] 1 Remove all orig inal docume nts from the AD F tray. 2 Open th e top ADF top cover . 3 Remove jammed paper. Note: M ake sure tha t all paper fragmen ts are removed. 4 Clos e th e cover . 5 Open the sca nner c over, and the n open the bot tom ADF door. 6 Remove jammed pape ...

  • Lexmark 036 - page 270

    7 Clos e th e door . 8 Clos e the scanne r cov er. Clearing jams 270 ...

  • Lexmark 036 - page 271

    Troubleshooting Understanding th e printer mes sages Cartridge low [88.xy] You may nee d to orde r a repl acement toner cartridg e. If necessary, touch Cont inue on the printe r cont rol panel t o clear the message and continue printing. Cartridge nearly low [88.xy] If nece ssary, to uch Continue on the printe r con trol pa nel t o clear t he me ss ...

  • Lexmark 036 - page 272

    • Touch Reset active bin to reset t he acti ve bin for a l inked set of bins . • Cancel the print job. Change [paper source] to [paper type] [pap er size] load [orientation] Try on e or more of the follo wing: • Load the cor rect size and type of pa per in the tra y or f eeder, sp ecify the paper size and type in the Paper menu on the c ontro ...

  • Lexmark 036 - page 273

    Disk full [62] Try on e or more of the follo wing: • From the co ntrol p anel, touch Continu e to clear th e mess age and c ontin ue pri nting. • Touch Reset active bin to reset t he acti ve bin for a l inked set of bins . • Dele te font s, ma cros, and ot her d ata store d in t he prin ter h ard d isk. • Install a hard d isk with la rger c ...

  • Lexmark 036 - page 274

    Fax memory full From the printe r con trol pa nel, touch Contin ue to clear the mess age. Fax part ition inoperati ve. C o ntact system administrator. Try on e or more of the follo wing: • From the pr inter co ntro l pan el, touc h Co ntinue to clear the message . • Turn off the printer, and then turn it back on. If the message appears again, t ...

  • Lexmark 036 - page 275

    Insert hole pu nch box Insert the hole punc h box into the f inis her, and t hen to uch Continue t o clear the message. Insert Tray [x] Try on e or more of the follo wing: • Insert th e specified tr ay in to the pr inter. • Cancel the print job. • Reset t he acti ve bin for a linke d set of bins by select ing Reset ac tive bin on the p rinter ...

  • Lexmark 036 - page 276

    Load [paper so urce] with [custom string] [pape r orientation ] Try on e or more of the follo wing: • Load the tray or feeder with the corr ect size and type of pap er, and then touch Finishe d load ing paper on the cont rol p anel . • Touch Reset active bin to reset t he acti ve bin for a l inked set of bins . • Cancel the cur rent jo b. Loa ...

  • Lexmark 036 - page 277

    Load Multip urpose Feeder wi th [custom type name] [pap er orientatio n] Try on e or more of the follo wing: • Load the feeder with the correct size and typ e of paper. • From the co ntrol p anel, touch one of t he fo llowin g: – Prompt each p age, paper loade d or Do not prom pt, pap er load ed —To clear t he message and continue printing. ...

  • Lexmark 036 - page 278

    Load staples [G11, G12] Try on e or more of the follo wing: • Replace or insert the staple cartridge into th e finisher. For inst ructions on re placing o r inser ting the s taple car tridge int o the finisher, touch More inf orm ation on the cont rol p anel . • From the co ntrol p anel, touch Continu e to clear th e mess age and c ontin ue pri ...

  • Lexmark 036 - page 279

    • Update the netw ork fi rmwar e in the prin ter or prin t ser ver. For mo re inf orm ation, visit the Lexmar k suppo rt We b site at htt p://suppo rt.lexma rk.co m . Not enough free space in flas h memory fo r resourc es [52] Try on e or more of the follo wing: • From the co ntrol p anel, touch Continu e to clear th e mess age and c ontin ue p ...

  • Lexmark 036 - page 280

    Printer had to restart. Last jo b may be incomplete. From the printe r con trol pa nel, touch Contin ue to clear th e mes sage an d contin ue prin ting. For more in formation , visit http:// suppo rt.le xmark.co m or cont act cust omer suppo rt. Reinstall missing or unresp onsive cartrid ge [31.xy] Try on e or more of the follo wing: • Check if t ...

  • Lexmark 036 - page 281

    Remove pape r from bin [x] Remove the pap er from t he speci fied bi n. The prin ter a utomat ically s enses pa per rem oval a nd resum es prin ting. If removing the paper does not clear the message, then to uch Contin ue . Remove paper from [li nked se t bin name] Remov e paper from the spec ified bin. The printe r auto mati cally d etect s paper ...

  • Lexmark 036 - page 282

    Region number Region 5 Africa, Middle East, rest of Europe 9I n v a l i d Notes: • The x and y values represent . xy in the code t hat appe ars o n the prin ter co ntrol panel . • The x and y values m ust matc h for print ing to c ontinue. Replace jammed ori ginals if restarting job. Try on e or more of the follo wing: • Touch Cancel job to c ...

  • Lexmark 036 - page 283

    Replace pape r pick rolle rs in [paper so urce], use parts an d instructio ns in tray 1 o r tray 2 compartment [80 ] Try on e or more of the follo wing: • Replace the pick roll ers, and then touch Rolle rs r epla ced on the contro l panel t o clear the m essag e and con tinue prin tin g. • Touch C ontin ue and re place l ater (Ja ms may co ntin ...

  • Lexmark 036 - page 284

    Scan ner dis able d. Co ntac t syst em adm i nistra tor if prob lem per sist s. [8 40.0 2] Try on e or more of the follo wing: • Touch Co ntinu e wit h scanne r disabl ed to retu rn to th e home s creen, and then c ontac t your s ystem s uppor t person. • Touch Reboot and au tomatically enable scann e r to cancel the job. Note: This atte mpts t ...

  • Lexmark 036 - page 285

    • Update the netw ork fi rmwar e in the prin ter or prin t ser ver. For mo re inf orm ation, visit the Lexmar k suppo rt We b site at htt p://suppo rt.lexma rk.co m or contact customer suppo rt, and then report the mess age. Standard USB port disabled [56] Try on e or more of the follo wing: • From the pr inter co ntro l pan el, touc h Co ntinu ...

  • Lexmark 036 - page 286

    Tray [x] paper si ze unsupported Repl ace with a suppo rted pape r size. Unformatted flash detected [5 3] Try on e or more of the follo wing: • From the pr inter co ntro l pan el, touc h Co ntinue to stop the defragm entat ion a nd contin ue pri nting . • Format the flas h memo ry. Note: If the error message remains, then the flash memory may b ...

  • Lexmark 036 - page 287

    Solving printer problems Basic prin ter problems The printer is not responding Action Yes No Step 1 Make sure the printer is turned on. Is the printer turned on? Go to step 2. Turn on the printer. Step 2 Check if the printer is in Sleep mo de or Hibernate mode. Is the printer in Sleep mode or Hibernate mode? Press the S leep button to wak e the pr ...

  • Lexmark 036 - page 288

    Action Yes No Step 7 Check if the printer is plu gged into any surge protecto rs, uninterrupt ible power supplies, o r extension c ords. Is the printer plugged in to any surg e protectors, unint erruptible power supplies, or extension co rds? Connect the printer power cord dire ctly t o a properly ground ed electrical outl et. Go to step 8. Step 8 ...

  • Lexmark 036 - page 289

    Printer display is blank Action Yes No Step 1 Press the Sleep button on the printer co ntrol panel. Does Ready appear on the printer displ ay? The p ro blem is solve d. Go to st ep 2. Step 2 Turn off the printer, then wait for about 10 sec onds, and then turn the printer back on. Do Please wait and Ready appear on the prin ter display? The pr oblem ...

  • Lexmark 036 - page 290

    Action Yes No Step 4 a Check if the internal opti on is selected. It may be necessary to manuall y add the internal option i n the printer driver to make it avai lable for pr int jobs. For more information, s ee “Adding available optio ns in the print driver” on p age 45 . b Resend the print job. Does the i nternal o ption oper ate correctl y? ...

  • Lexmark 036 - page 291

    Action Yes No Step 2 Check the cable and the ISP connect ion. a Use the correct cabl e, and then make sure it is securely connec ted to the ISP. b Check if the ISP solution interfac e cable is securely connected into the receptacle of the controll er board. Note: The ISP solution interfac e cable and the rece ptacle on the controller boar d are col ...

  • Lexmark 036 - page 292

    Action Yes No Step 4 Check if the tray is available in the printer driver. Note: If necessary, manual ly add the tray in the printer driver to ma ke it available for pr int jobs. For more information, see “A dding available options in the print dri ver” on page 45 . Is the tray available in the printer driver? The pr oble m is so lved. Con tact ...

  • Lexmark 036 - page 293

    Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do on e or more of the following: • Make sure pape r lies flat in the tray. • Check if the paper size indicators on the paper guides are aligned with the paper size i ndicators on the t ray. • Check if the paper guides are aligned against the edges of the paper. • Make ...

  • Lexmark 036 - page 294

    Solving print problems Printing problems Confidential and other held jobs do not print Note: Confiden tial, V erify, Reser ve, and Repeat pr int jobs may be delete d if th e prin ter re quires extra m emory t o process ad ditio nal held jobs. Action Yes No Step 1 Open the held jobs folder on the p rinter display, and then verify that your print job ...

  • Lexmark 036 - page 295

    Envelope seals when printing Action Yes No a Use envelopes that have been stored in a dry environment. Note: Printi ng on envelopes with high moisture content can seal the flaps. b Resend the print job. Does the envelope sea l when printing? Contact customer support . The pr ob lem is s olve d. Error mes sage about re ading the flash driv e appears ...

  • Lexmark 036 - page 296

    Incor rect chara cters prin t Action Yes No Step 1 Make sure that the printer is not i n Hex Trace mode . Note: If Read y Hex appears on th e display, then turn off the printer, and then turn it ba ck on to deactivate Hex Trac e mode. Is the printer in Hex Trace mode? Deactivate Hex Trace mode. Go to step 2. Step 2 a From the control panel , select ...

  • Lexmark 036 - page 297

    Large jobs do not collate Action Yes No Step 1 a From the Finishing menu on the pri nter control panel, set Coll ate to (1,2,3) (1,2,3). b Resend the print job. Did the job print and col late correctly? The p ro blem is solve d. Go to st ep 2. Step 2 a From the printer software, set Coll ate to (1,2,3) (1,2,3). Note: Setting Collate to (1,1, 1) (2, ...

  • Lexmark 036 - page 298

    Print job takes longer than ex pected Action Yes No Step 1 a Disable Ec o ‑ Mode. From the control panel, navig ate to: Settings > Gen era l Set tin gs > Eco ‑ Mode > Off Note: Disabling Eco ‑ Mode may increase the consumption of energy or paper, or both . b Resend the print job. Did the job print? The p ro blem is solve d. Go to st ...

  • Lexmark 036 - page 299

    Print jobs do not print Action Yes No Step 1 a From the document you are tryin g to print, open the Pri nt dialog and check if you have select ed the correct printer. Note: If the printer is not the default printer, then you must select the printer for each document that you want to print . b Resend the print job. Do the jobs print? The p ro blem i ...

  • Lexmark 036 - page 300

    Tray linking does not work Notes: • The trays can dete ct p aper l ength. • The multipurpose feeder does not automat ically detect the paper size. You m ust set the size from the Paper Size/Type m enu. Action Yes No Step 1 a Open the trays, and then check if they contain p aper of the same size and type. • Check if the paper g uides are in th ...

  • Lexmark 036 - page 301

    Print qual ity probl ems Char acter s have jag g ed or uneven edges Action Yes No Step 1 a Print a font sample list to check i f the fonts you are us ing are supported by the printer. 1 From the printer control pan el, navigate t o: > Reports > Prin t Fo nt s 2 Touch PCL Fonts or PostScript Fonts . b Use a font that is supported by the pr int ...

  • Lexmark 036 - page 302

    Action Yes No Step 1 a Move the paper guides in the tray to the correct positi ons for the paper loaded. b Resend the print job. Is the page or image clipped? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 From the control pan el, set the pape r size and type in the Paper menu to match the paper loaded in the tray. Do the paper size and type ma ...

  • Lexmark 036 - page 303

    Gray background o n prints ABCDE ABCDE ABCDE Leading edge Trailing edge Action Yes No Step 1 a From the Quality menu on the control panel, decrease the toner darkness. b Resend the print job. Did the gray backgro und disappear from the pri nts? The p ro blem is solve d. Go to st ep 2. Step 2 a Remove, and then reinstall the photoco nductor un it an ...

  • Lexmark 036 - page 304

    Action Yes No Step 1 a Make sure that your software program is usi ng a correct fill patt ern. b Resend the print job. Do horizontal voids app ear on prints? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 a Load the specifie d tray or feeder with a recommended type of pap er. b Resend the print job. Do horizontal voids app ear on prints? Go t o ...

  • Lexmark 036 - page 305

    Action Yes No Step 1 a Move the width and lengt h guides in the tray to the correc t positions for the paper size loaded. b Resend the print job. Are the margins co rrect? The p ro blem is solve d. Go to st ep 2. Step 2 From the printer cont rol panel, set the paper size in the Pap er menu to match the paper loaded in the tray. Does the paper size ...

  • Lexmark 036 - page 306

    Action Yes No Step 4 a Remove the paper from the tray, and then turn it over. b Resend the print job. Is the paper still curled? Go t o st ep 5. Th e pr oble m is so lve d. Step 5 a Load paper from a fresh pac kage. Note: Paper absorbs moisture due to high humidi ty. Store paper in its original wrap per until you use it. b Resend the print job. Is ...

  • Lexmark 036 - page 307

    Action Yes No Step 3 Replace the photocond uctor uni t, and then resend the print job. Is the printer still printi ng blank pages? Contact customer support . The pr ob lem is s olve d. Printer is printing solid black pages Action Yes No Step 1 a Reinstall the phot oconducto r unit. Warn ing— Pot en tial Da mage : Do not expose the photocond uctor ...

  • Lexmark 036 - page 308

    Action Yes No Step 1 a Move the paper guides in the tray to the correct positi ons for the paper size loaded in the tray. b Resend the print job. Do print irr egulariti es still appear? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 From the control pan el, set the pape r size and type in the Paper menu to match the paper loaded in the tray. Do ...

  • Lexmark 036 - page 309

    Print is too dark Action Yes No Step 1 a From the Qualit y menu on t he control panel, r educe the toner darkness. Note: 8 is th e factory default setting. b Resend the print job. Is the print still too dar k? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 a From the control pan el, set the paper type, tex ture, and weight in the Pa per m e nu ...

  • Lexmark 036 - page 310

    Action Yes No Step 5 a Load paper from a fresh pac kage. Note: Paper absorbs moisture due to high humidi ty. Store paper in its original wrap per until you use it. b Resend the print job. Is the print still too dar k? Go t o st ep 6. Th e pr oble m is so lve d. Step 6 a Clean the charger and the print head lens. b Resend the print job. Is the print ...

  • Lexmark 036 - page 311

    Action Yes No Step 3 a Depending on your operating system, specify t he paper type, texture, and weight from Printi ng Preferences or from th e Print dialo g. b Resend the print job. Is the print still too li ght? Go t o st ep 4. Th e pr oble m is so lve d. Step 4 Make sure that the paper has no texture or roug h finishes. Are you printing on textu ...

  • Lexmark 036 - page 312

    Action Yes No Step 1 a Clean the charger and the print head lens. b Resend the print job. Do repeating defects still appear on pri nts? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 a Replace the ph otoconductor unit if t he distance b etween the defects is equal to 95 .8 mm (3.77 in.) . b Resend the print job. Do repeating defects still appea ...

  • Lexmark 036 - page 313

    Action Yes No Step 3 a Depending on your operating system, specify the paper type and weight from Printing Prefe rences or from the Print dialog. b Resend the print job. Do shadow images st ill appear on pr ints? Go t o st ep 4. Th e pr oble m is so lve d. Step 4 a Clean the charger and the print head lens. b Resend the print job. Do shadow images ...

  • Lexmark 036 - page 314

    Streaked horizontal lines appear on prints ABCDE ABCDE ABCDE Action Yes No Step 1 a Depending on your oper ating system, specify the tray or fe eder from Printing Preferences or the Print dialog. b Resend the print job. Do streaked horizontal lin es appear on prin ts? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 From the control panel, set th ...

  • Lexmark 036 - page 315

    Action Yes No Step 6 Replace the photocond uctor uni t, and then resend the print job. Do streaked horizontal lin es appear on prin ts? Contact customer support . The pr ob lem is s olve d. Streaked vertical lines appear on prints ABCDE ABCDE ABCDE Leading edge Trailing edge Action Yes No Step 1 a Depending on your operating system, specify t he pa ...

  • Lexmark 036 - page 316

    Action Yes No Step 4 a Remove, and th en rei nstall the ph otoconductor unit. 1 Remove the photoconductor unit. Warn ing— Pot en tia l Dam age: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cau se print quality problems. 2 Install the photocondu ctor unit. b Resend the print job. Do ...

  • Lexmark 036 - page 317

    Action Yes No Step 3 Replace the photocond uctor uni t, and then resend the print job. Did the toner fog or bac kground shading disappear from the prints? The pr oble m is so lved. Con tact custome r support . Toner rubs off Leading edge Trailing edge ABC DEF Action Yes No Step 1 From the Paper menu on the printer control panel, ch eck the paper ty ...

  • Lexmark 036 - page 318

    Transparency print quality is poor Action Yes No Step 1 From the printer cont rol panel, set the paper type in the Pap er menu to match the paper loaded in the tray. Is the paper type for the tray set to Transparency? Go t o s tep 2. Set the pa per t yp e to Transparen cy. Step 2 a Check if you are using a rec ommended type of transparency. b Resen ...

  • Lexmark 036 - page 319

    Action Yes No Step 1 a Make sure your sof tware progra m is using a corre ct fill pattern. b Resend the print job. Do vertical void s appear on prints? Go t o st ep 2. Th e pr oble m is so lve d. Step 2 a From the control panel, set th e paper type and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job. Do vertic ...

  • Lexmark 036 - page 320

    Solving copy problems Copier do es not respon d Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the erro r or status message. Go to step 2. Step 2 Check if the power cord is plugg ed into the printer and a properly grounded electrical outlet. Is the power cord plugge d i ...

  • Lexmark 036 - page 321

    Poor copy quality Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the erro r or status message. Go to step 2. Step 2 Check the quality of the ori ginal document. Is the quality of the original document satisfactory ? Go to step 3. Increase the scan resolution setting for ...

  • Lexmark 036 - page 322

    Action Yes No Step 8 Check for missing or faded text on prints. a From the Copy screen, navi gate to: Advanced Options > Advanced Imaging b Adjust the settings: • Sharpness —Increase the c urrent setting. • Contrast —Incr ease the current setting. c Resend the copy job. Do prints have missing or faded text? Go t o st ep 9. Th e pr oble m ...

  • Lexmark 036 - page 323

    Cann ot se nd o r recei ve a fax Action Yes No Step 1 Check if an error or status message appears on the display. Is there an error or sta tus message on the display? Clear the erro r or status message. Go to step 2. Step 2 Check if the power cord is plugg ed into the printer and a properly grounded electrical outlet. Is the power cord plugge d int ...

  • Lexmark 036 - page 324

    Action Yes No Step 6 Check if the print er is connected to a n analog phone servic e or the correct digital connec tor. The fax modem is an analog device . Certain devices can be connected to the printer so that digi tal telephone services can be used. • If you are using an ISDN t elephone service, then connect the printer to an analog telephone ...

  • Lexmark 036 - page 325

    Action Yes No Step 10 a Temporarily disable voice mai l service. For mo re informatio n, contact your telephone company. Note: If you want to u se both voice mail and the printer, then consider addi ng a second te lephone lin e for the printer. b Try sending or rec eiving a fax. Can you send or receive a fax? The p ro blem is solve d. Go to st ep 1 ...

  • Lexmark 036 - page 326

    Can se nd b ut not rec eive faxes Action Yes No Step 1 Check the tray or feeder. If empty, then load paper in the tray or feeder. Can you receive faxes? The p ro blem is solve d. Go to st ep 2. Step 2 Check the ring count delay settings. a Open a Web browser, and then type the prin ter IP address in the address field. Notes: • View the printer IP ...

  • Lexmark 036 - page 327

    Action Yes No a From the home screen, navigate to: > Settings > Gen eral Set tings > Run in itia l set up > Yes > Sub mit b Tur n o ff the printe r, an d the n tur n it b ack on . The “Select your language” screen a ppears on the printer display. c Select a language, and then touc h . d Select a country or region, and then touch ...

  • Lexmark 036 - page 328

    Action Yes No Step 2 Decrease the incoming f ax transmission speed. a Open a Web browser, and then type the prin ter IP address in the address field. Notes: • View the printer IP addre ss on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123. 123. 123 . • If you are using a pro xy serve ...

  • Lexmark 036 - page 329

    Solving scanner problems Cann ot sca n from a comput er Action Yes No Step 1 Make sure t he printe r is turne d on and t hat Read y appears on the printer display before scanning a job. Does Ready appear before scanning the job? Go to step 3. Go to step 2 . Step 2 Turn off the printer, then wait for about 10 sec onds, and then turn the printer back ...

  • Lexmark 036 - page 330

    Action Yes No Step 3 Clean the scanner glass an d the ADF glass using a clean, lint ‑ free cloth dam pen ed wi th wa ter . Is the scanner glass clean? Go to step 4. See “Cleaning the scanner glass” on page 20 5 . Step 4 Check the placement of the document or photo. Make sure that the doc ument or photo is lo aded facedown on the scanner glass ...

  • Lexmark 036 - page 331

    Action Yes No Step 3 Check if the document or photo you want to scan is open in another applicatio n or being used by another user. Is the file you want to scan open by another ap plication or user? Close the file you are scanning. Go to step 4. Step 4 Check if either the Append time stam p or the Overwrite existing file chec k box is selected in t ...

  • Lexmark 036 - page 332

    The scanner do es not respond Action Yes No Step 1 Check if the printer is turn ed on. Is the printer turned on? Go to step 2. Turn on the printer. Step 2 Check if the printer cable is securely attac hed to the printer and th e computer, print server, option , or other network device. Is the printer cable securely attac h ed to the printer and th e ...

  • Lexmark 036 - page 333

    Solving home screen application problems An appl icat ion e rror has occurred Action Yes No Step 1 Check the system log fo r relevant details. a Open a Web browser, and then type the prin ter IP address in the address field. If you do not know the IP address of the pr inter, then you can: • View the IP address on the pr inter home screen. • Pri ...

  • Lexmark 036 - page 334

    Action Yes No Step 3 Check if the network conn ection is working. Is the network connection working ? Go to step 4. Contac t your system support person. Step 4 Make sure the cable connection s to th e printer and print server are secure. For more information, see the setup docum entation that came with the printer. Are the cable connections to th e ...

  • Lexmark 036 - page 335

    Notices Prod uct i nfo rmat ion Produc t name: Lexmark MX910d e, MX911dte, M X912dxe Machin e type: 7421 Mode l(s): 036, 236, 436 Edition notice June 2014 The foll owing paragraph does n ot ap ply to any country wher e such provisio ns are incons istent with l ocal law : LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOU T WA ...

  • Lexmark 036 - page 336

    Trademarks Lexmark, Lexm ark wi th diamo nd desi gn, Ma rkNet , and M ark Visi on ar e tr adema rks of Le xma rk I nter nat ion al, In c., registered in the Un ited States and/or other countries. ScanBack i s a trademark o f Lexmark Int ernational, Inc. Mac and the Mac logo are trademarks of Apple In c., registered in th e U.S. and other countries. ...

  • Lexmark 036 - page 337

    Univers Lin otype-Hell AG and/or its subsid iaries All other trademarks are th e property of their res pective owners. AirPrint and the Air Print logo are tr ademarks of Appl e, Inc. Federal Commun ications Com mission (FCC) comp liance information statement This produ ct has been tested and f ound to compl y with the li mits for a Class A digital ...

  • Lexmark 036 - page 338

    Values are subject t o change. See www .lexmark.com for curren t values. Waste from Electrical and Electronic Equipment (WEEE) directive The WEEE log o signifies sp ecific r ecycling programs and p roc edures for electronic prod ucts in countries of the European Union. We encour age the recycling of our pr oducts. If you ha ve further ques tions ab ...

  • Lexmark 036 - page 339

    ENERGY STAR Any Lex mark product bea ring th e ENE RGY ST AR em blem o n the pr oduct or on a start -up scr een is cert ifi ed to c omply with Env ironmen tal Pro tectio n Agenc y (EPA ) ENE RGY STAR r equire ments as con figur ed when s hipped by Lexmar k. Temperature information Ambien t opera ting temper ature 10 to 30 °C (50 to 86°F ) Shipp i ...

  • Lexmark 036 - page 340

    DANGER - Invisible l aser radiat ion when cartr idges are remo ved and interlock defeated. Avoid e xposure to laser beam. PERIGO - Radi ação a laser invisí vel será l iberada se os cartuch os forem r emovidos e o lacre rompido. Evite a expos ição aos feix es d e laser. Opasnost - Ne vidljivo lase rsko zra č enje kada su kasete uklonjene i po ...

  • Lexmark 036 - page 341

    Sleep Mode This product is design ed with an energy-saving mode called Sleep Mo de . The Sleep Mode saves energy by lowering power co nsum ption d uring extend ed periods of inactiv ity. Th e Sle ep Mod e is aut omatic ally engage d afte r this produc t is not used for a sp ecified period of time, called the Sleep Mode Timeout . Factory default Sle ...

  • Lexmark 036 - page 342

    Japanese VCCI notice European Community (EC) direc tives conformity This pr oduct is in c onformi ty with the pro tection requ irement s of EC Council directives 2004/108/EC, 2006/95/EC, and 2011/65/EU on the approxi mation and harmon ization of th e laws of the Me mber States relating to electromagn etic compatibility, safety of electrical equipm ...

  • Lexmark 036 - page 343

    A plug and jack use d to connect this equipme nt to the pr emises ’ wiring and te lephon e network mus t comply with the applicabl e FCC Pa rt 68 rule s and requi reme nts adop ted by the ACTA. A complia nt teleph one cord and m odular pl ug is provide d with t his pro duct. It is de sign ed to be conn ected t o a com patible modul ar jac k that ...

  • Lexmark 036 - page 344

    an interface may consist of any comb ination of devices, subject only to the requirem ent that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the prod uct labeling. Telephone companies report that ele ctrical surges, typically lightnin g transients, are very destr uctive to cust ...

  • Lexmark 036 - page 345

    • The equipment shall be set to ensure that autom atic calls to different numbers are sp aced such that there is not less than 5 secon ds bet ween t he end of one c all att empt and th e begi nning of anot her. Japanese telecom notice The ins talled opt ional modem is in comp liance wi th Japa nese Telecom municati on Law a nd has be en Cert ifie ...

  • Lexmark 036 - page 346

    relating to electrom agnetic c ompatib ility, safety o f electric al equi pmen t desi gned f or use wit hin cer tain vo ltag e limit s, radio e quipme nt and t elecomm unica tions t ermin al equip ment, a nd on t he rest rictio ns of use of ce rtain hazardo us substances in electrical and electronic equipment. Complian ce is indica ted by the CE m ...

  • Lexmark 036 - page 347

    Industrie Canad a (Canada) Selon la r ègleme ntatio n d'Indus trie Canada, l'émet teur rad io ne fon ctionne r qu'a vec u ne antenne dont le type et le gain max ima l (ou infé rieu r) ont été a pprouv és par Indus trie Canada. Pour r éduire les i nterf érence s rad io po tentie lles auprès d'autres utilisateurs, le type ...

  • Lexmark 036 - page 348

    AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK TR UK Č esky Spole č nost Lexmark International , Inc. tímto proh l ašuje, že výrobek tent o výrobek je ve shod ě se základními požadavky a další mi p ř íslušnými ustanoveními sm ě r nice 19 99/5 /ES. Dansk Lexmark Interna tional, Inc. er ...

  • Lexmark 036 - page 349

    Polski Niniejszym Lexmark I nternational , Inc. o ś wiadcz a, ż e niniej szy produkt jest zgodny z zasadni czymi wymogami ora z pozosta ł ymi stosown ymi postanowi eniami Dyre ktywy 1999/5/EC. Português A Lexmark Internati onal Inc. de clara que este este produt o está conforme com o s requisitos essenciais e ou tras disposições da Diretiv a ...

  • Lexmark 036 - page 350

    To obtai n war ranty s ervi ce you may be requi red t o pre sent proof o f ori ginal purc hase. You m ay be req uired to d eliver your prod uct to the Remarketer or Lexmark, or ship it prep a id and sui tab ly pac kaged to a Lex mark designat ed locat ion . You are resp onsib le fo r los s of, or dam age to , a pro duct in tr ansit to the Remarkete ...

  • Lexmark 036 - page 351

    Limitation of liabili ty Your s ole remed y unde r th is li mite d warr anty is se t fort h in this do cument. Fo r any c lai m conc erning pe rform ance or nonperf ormanc e of Lexm ark or a Remarke ter fo r this pr oduct under t his li mited wa rran ty, you ma y recov er act ual damages up to the limit set fo rth in the fo llowing p aragraph. Lexm ...

  • Lexmark 036 - page 352

    The use of th is product or ser vice is subject to the reason able, non-di scrimin ator y ter ms in the I ntel lectual Proper ty Rights (I PR) Discl osure of Cert icom Corp. at the IETF for Al gorith ms for In terne t Key Exchange versio n 1 (IKEv1) imple mented i n the product or ser vice. Notices 352 ...

  • Lexmark 036 - page 353

    Index Numerics 300K mainten ance kit orderi ng 212 Symbol s [x] maintenance kit very low [80.xy] 278 [x] ‑ page jam, clear manual feeder. [200.xx] 245 [x] ‑ page jam, detach the 3000 ‑ sh eet tray and open door F. [24y.xx] 252 [x] ‑ page ja m, open doo r C and c lear all jammed med ia. [2yy.xx] 24 5 [x] ‑ page ja m, open door D a nd clear ...

  • Lexmark 036 - page 354

    Configur ation c hange, s ome held jobs were no t resto red [57] 272 configur ation i nform ation wireless network 46 Configur e MP menu 1 21 configur ing multipl e print ers 240 configur ing e ‑ mail settings 84 configur ing port set tings 4 9 configurin g supply notific ation s 240 connec ting printer to di stinctiv e ring servi ce 104 connec t ...

  • Lexmark 036 - page 355

    Edit Secu rity Setups menu 141 embedde d solu tions inform ation erasing 203 Embedd ed Web S erver access ing 20 adjusting brightn ess 200 checking t he sta tus of part s 210 checking the status of suppl ies 210 copying s ettin gs to o ther printer s 240 creating a fax des tination shortcu t 107 creat ing an FT P shor tcut 112 creating e ‑ m ail ...

  • Lexmark 036 - page 356

    creati ng shor tcuts using the Embedde d Web Server 107 creati ng shor tcuts using the printer cont rol pane l 10 7 dist inctiv e ring serv ice 104 fax setup 90 forwardi ng fax es 110 holding faxes 109 maki ng a f ax lig hter o r darke r 108 send in g a fax at a sch edul ed time 106 sett ing the d ate and ti me 104 setting t he fax number 104 setti ...

  • Lexmark 036 - page 357

    L labels, pap er tips 59 letterhead copying o n 77 loading, mu ltipurpose feeder 59 loading, trays 5 9 line filter 95 LINE port 44 linking tr ays 56, 57 Load [paper s ource] wit h [custom string] [paper orie ntation] 276 Load [paper s ource] wit h [custom type name] [paper o rientation] 276 Load [paper s ource] with [ paper size] [paper orientat io ...

  • Lexmark 036 - page 358

    opti onal c ard installi ng 31 opti onal t rays installi ng 38 opti ons firmware card s 27 Inter nal Solu tions Port (ISP ) 32 memory card 27, 30 printer ha rd disk , removing 36 opti ons, cop y sc reen copy from 81 scale 8 2 opti ons, t ouc h ‑ screen copy 81 e ‑ mail 87 , 88 fax 111 order ing 300K ma intena nce kit 212 photoco nduct or unit 2 ...

  • Lexmark 036 - page 359

    held jo bs do not print 294 incorrect charact ers pri nt 29 6 incorrect margin s on pri nts 304 jammed pages are not reprint ed 292 job prin ts fr om wron g tr ay 296 job prin ts o n wrong p aper 2 96 jobs do no t pri nt 299 Large jobs do not collate 297 multipl e ‑ lang uage P DF files do not print 297 paper cur l 305 paper frequent ly jams 2 93 ...

  • Lexmark 036 - page 360

    Load Multipurpose Feeder with [custom string] [p aper orient a tion ] 276 Load Multipurpose Feeder with [custom type na me] [paper orient a tion ] 277 Load Multipurpose Feeder with [paper size] [paper orient a tion ] 277 Load Multipurpose Feeder with [paper type] [paper size] [pap er orient a tion ] 277 Load staples 27 7 Load staple s [G11, G12] 27 ...

  • Lexmark 036 - page 361

    printin g confiden tial and ot her held jobs from a M acinto sh com puter 73 from Wi ndows 73 printin g forms 7 0 printing from a flash drive 71 printin g from a mobil e devic e 72 publicat ions where to find 9 Push But ton Confi guratio n met hod using 48 Q Quality me nu 188 R recipien t(s) e ‑ mail o ption s 86 recycled pap er using 61, 1 98 re ...

  • Lexmark 036 - page 362

    scan screen content sour ce 115 conten t ty pe 115 Scan to C omput er setti ng up 114 Scan to Netwo rk setti ng up 24 using 112 scan trou bleshoo ting cannot sca n from a com puter 329 partial document or pho to scans 329 scan job was not su cces sful 330 scann er uni t does not c lose 331 scanning takes too long or freezes the computer 331 scan ne ...

  • Lexmark 036 - page 363

    waste to ner bo ttle 2 11 Supply needed to complete jo b 285 supply no tifi cations configur ing 240 supported flash d rives 7 2 suppor ted pape r siz es 63 finisher 67 suppor ted pape r types 66 finisher 67 suppor ted paper we ights 66 finisher 67 T TCP/IP menu 131 teleco mmun ication notices 342, 343 , 344, 345 The device is op erating in s afe m ...

  • Lexmark 036 - page 364

    U underst anding the h ome sc reen button s and icons 16 uneven pr int densi ty 318 Unform atted fl ash detect ed [53] 286 Universal pa per size setti ng 5 1 Universal S etup menu 1 26 unlinking tra ys 56, 57 Unsuppo rted opti on in slot [x] [55] 286 Unsuppor ted USB hub, please remove 273 USB port 44 USB/paral lel interfa ce card troubl eshoot ing ...

Manufacturer Lexmark Category All in One Printer

Documents that we receive from a manufacturer of a Lexmark 036 can be divided into several groups. They are, among others:
- Lexmark technical drawings
- 036 manuals
- Lexmark product data sheets
- information booklets
- or energy labels Lexmark 036
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lexmark 036.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lexmark 036, service manual, brief instructions and user manuals Lexmark 036. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lexmark 036.

Similar manuals

A complete manual for the device Lexmark 036, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lexmark 036 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lexmark 036.

A complete Lexmark manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lexmark 036 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lexmark 036, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lexmark 036, that we can find in the current document
3. Tips how to use the basic functions of the device Lexmark 036 - which should help us in our first steps of using Lexmark 036
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lexmark 036
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lexmark 036 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lexmark 036?

Use the form below

If you did not solve your problem by using a manual Lexmark 036, ask a question using the form below. If a user had a similar problem with Lexmark 036 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)