English dropdown-ico

Manual ADTRAN L128T

200 pages 1.37 mb
Download

Go to site of 200

Summary
  • ADTRAN L128T - page 1

    Express L128 and Express L128T ISDN Router/Bridge USER MANUAL Express L128, Data Only 1202070L1 Express L128T with POTS Option 1202070L2 61202.070L1-1A May 1998 ...

  • ADTRAN L128T - page 2

    Trademark: DMS-100 is a trademark of Northern Telecom, Inc. Ethernet is a trademark of Digital Equipment Corporation, Intel Corporation, and Xe- rox Corporation. ExpertISDN (patent number 5,715,241) is a trademark of ADTRAN, Inc. Macintosh is a registered trademark of Apple Computer, Inc. Novell, NetWare, and Internetwork Packet Exchange (IPX) are ...

  • ADTRAN L128T - page 3

    FCC regulations require that the following information be provided in this manual: 1. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given; oth- erwise, notification is given as soon as possible. The telephone company will advise the customer of ...

  • ADTRAN L128T - page 4

    CANADIAN EMISSIONS REQUIREMENTS This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of the Department of Communications. Cet appareil nuerique respecte les limites de bruits radioelectriqu ...

  • ADTRAN L128T - page 5

    IMPOR T ANT SAFETY INSTR UCTIONS When using your telephone equipment, basic safety precautions should al- ways be followed to reduce the risk of fire, electric shock and injury to persons. The precautions are listed below. 1. Do not use this product near water (for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement ...

  • ADTRAN L128T - page 6

    61202.070L1-1 Express L128/L128T User Manual i T able of Contents Quick Startup Guide ......................................................................................................... 1 Setting up the ISDN Line ................................................................................................... 1 Connecting to an Internet Ser ...

  • ADTRAN L128T - page 7

    Table of Contents ii Express L128/L128T User Manual 61202.070L1-1 Chapter 3. Terminal Menu Operation and Structure ................................................. 27 Terminal Menu Structure .................................................................................................. 27 Configuration .......................................... ...

  • ADTRAN L128T - page 8

    Table of Contents 61202.070L1-1 Express L128/L128T User Manual iii IP/Static Routes ................................................................................................... 41 Static Routes/Active ..................................................................................... 41 Static Routes/IP Address ............................ ...

  • ADTRAN L128T - page 9

    Table of Contents iv Express L128/L128T User Manual 61202.070L1-1 Bridge/Spanning Tree......................................................................................... 52 Spanning Tree/Mode ................................................................................... 52 Spanning Tree/Priority .......................................... ...

  • ADTRAN L128T - page 10

    Table of Contents 61202.070L1-1 Express L128/L128T User Manual v Connection List/IP .............................................................................................. 67 IP/Mode ......................................................................................................... 67 IP/NAT ............................................ ...

  • ADTRAN L128T - page 11

    Table of Contents vi Express L128/L128T User Manual 61202.070L1-1 Connection List/Bandwidth .............................................................................. 77 Bandwidth/On Demand .............................................................................. 77 Bandwidth/Mode ........................................................... ...

  • ADTRAN L128T - page 12

    Table of Contents 61202.070L1-1 Express L128/L128T User Manual vii Dial/Dial ...................................................................................................................... . 8 8 Dial/Hang Up .............................................................................................................. 89 Dial/Status ......... ...

  • ADTRAN L128T - page 13

    Table of Contents viii Express L128/L128T User Manual 61202.070L1-1 Upgrade/Status.................................................................................................... 104 Upgrade/Start Transfer ...................................................................................... 105 Upgrade/Abort Transfer .......................... ...

  • ADTRAN L128T - page 14

    61202.070L1-1 Express L128/L128T User Manual ix List of Figures Figure 1-1: Express L128/L128T ...................................................................................... 7 Figure 1-2: Single User to Corporate LAN ..................................................................... 8 Figure 1-3: Single User to Internet Service Provider ...

  • ADTRAN L128T - page 15

    List of Figures x Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 16

    61202.070L1-1 Express L128/L128T User Manual xi List of T ables Table 2-A: Using the Flash-Hook ..................................................................................... 23 Table 4-A: Troubleshooting Calls .................................................................................... 113 Table D-A: IBM/AT Style EIA-232 Interface . ...

  • ADTRAN L128T - page 17

    List of Tables xii Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 18

    61202.070L1-1 Express L128/L128T User Manual 1 Quick Startup Guide SETTING UP THE ISDN LINE Before configuring the Express L128/L128T, ensure that the telephone service has provided the switch type, service profile identification (SPID), and local directory number (LDN). Example: Switch Type National ISDN-1 SPID1 20555512120100 SPID2 20555512130100 ...

  • ADTRAN L128T - page 19

    Quick Startup Guide 2 Express L128/L128T User Manual 61202.070L1-1 CONNECTING TO AN INTERNET SERVICE PROVIDER Internet Access using Network Address Translation (NAT) 1. Connect the 10BaseT cable from the PC’s network card to the Express L128/L128T. Select TO NIC on the Express L128/L128T back panel. 2. Go to the Configuration/Connection List menu ...

  • ADTRAN L128T - page 20

    Quick Startup Guide 61202.070L1-1 Express L128/L128T User Manual 3 19. If the call is successful, the Status column will read active . If not, make sure the number(s) are correct or reference Chapter 4 on page 107 (the trou- bleshooting chapter) before going on to the next step. 20. Once the call is up, the PC must generate a DHCP request to obtain ...

  • ADTRAN L128T - page 21

    Quick Startup Guide 4 Express L128/L128T User Manual 61202.070L1-1 11. Enter the IP address and Netmask parameters of the access server at the remote site. This creates a static route to the access server’s network which is entered into the Express L128/L128T’s IP route table. 12. Move the cursor over the RIP menu. Check with the network admini ...

  • ADTRAN L128T - page 22

    Quick Startup Guide 61202.070L1-1 Express L128/L128T User Manual 5 When the computer which is attached to the local LAN attempts to access a host on the access server, the Express L128/L128T will dial the number pro- vided in the Connection List profile. The Express L128/L128T will provide one of two B-channels based on traffic demand and POTS port ...

  • ADTRAN L128T - page 23

    Quick Startup Guide 6 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 24

    61202.070L1-1 Express L128/L128T User Manual 7 Chapter 1 Understanding ISDN and the Express L128/L128T ISDN OVERVIEW The Integrated Services Digital Network (ISDN) is a public or private switched digital network. ISDN is an international standard for digital communica- tions, allowing a full range of enhanced services supporting voice, data, and im ...

  • ADTRAN L128T - page 25

    Chapter 1: Understanding ISDN and the Express L128/L128T 8 Express L128/L128T User Manual 61202.070L1-1 Applications Single User to Corporate LAN • Telecommuter/Home Office Access to the corporate LAN • Single device access • User Datagram Protocol (UDP) broadcasts are “relayed” to corporate LAN. • Client device can obtain the Internet ...

  • ADTRAN L128T - page 26

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 9 Single User IP to Internet Service Provider (ISP) using Network Ad- dress Translation (NAT) • Provides high speed home access to the Internet • NAT provides translation from user assigned IP addresses to ISP assigned IP addresses. • The PC? ...

  • ADTRAN L128T - page 27

    Chapter 1: Understanding ISDN and the Express L128/L128T 10 Express L128/L128T User Manual 61202.070L1-1 Multiple Users to Internet Service Provider (ISP) using NAT • Provides high speed home access to the Internet • Multiple and simultaneous access • The PC’s IP address can by dynamically assigned by the Express L128/ L128T. • On-demand ...

  • ADTRAN L128T - page 28

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 11 Small Office - Home Office (SOHO) to Corporate LAN • Connects the small office or home office to the corporate LAN • Routes IP and Internet Packet Exchange (IPX) traffic from multiple devices to the corporate LAN • Bridges all non-routed t ...

  • ADTRAN L128T - page 29

    Chapter 1: Understanding ISDN and the Express L128/L128T 12 Express L128/L128T User Manual 61202.070L1-1 2. IP Router: The Express L128/L128T can function as an IP router using the Routing Information Protocol (RIP) for advertising and learning routes among other routers. Static routes may also be entered into the routing ta- ble. 3. IPX Router: IP ...

  • ADTRAN L128T - page 30

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 13 Bridging In Bridge Mode, the Express L128/L128T can communicate with two remote networks at a time. The destination is dialed by setting up a Connection List profile and choosing Dial on the Dial menu. See Configuration/Connection List on page 6 ...

  • ADTRAN L128T - page 31

    Chapter 1: Understanding ISDN and the Express L128/L128T 14 Express L128/L128T User Manual 61202.070L1-1 IP Routing The Express L128/L128T operates as a dial-up IP router when the Configura- tion/IP/IP Router/Mode option is configured to On . The Express L128/L128T uses an IP unnumbered WAN interface; the IP address and mask assigned to the unit’ ...

  • ADTRAN L128T - page 32

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 15 IPX Routing Like IP routing, the Express L128/L128T can connect to two different sites and exchange IPX packets. Network routes and services are learned and adver- tised using Novell’s RIP and SAP. Routes and services learned from a separate s ...

  • ADTRAN L128T - page 33

    Chapter 1: Understanding ISDN and the Express L128/L128T 16 Express L128/L128T User Manual 61202.070L1-1 Network Address Translation Mode NAT is a special mode of operation in which the Express L128/L128T obtains a dynamically assigned IP address from the peer router (typically an Internet Service Provider). This allows a network of computers to be ...

  • ADTRAN L128T - page 34

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 17 WAN Indicators PWR Flashes when the link is inactive; solid when the link is active. B1 Flashes green when the link is being negotiated; off when the link is active. After the link is active, B1 flashes green when a call on B1 channel is in prog ...

  • ADTRAN L128T - page 35

    Chapter 1: Understanding ISDN and the Express L128/L128T 18 Express L128/L128T User Manual 61202.070L1-1 ISDN Connection From the network, ISDN is delivered by a single 2-wire 2B1Q U-interface which is connected directly to the Express L128/L128T. ISDN network termi- nation is designed into the Express L128/L128T, eliminating the need and ex- pense ...

  • ADTRAN L128T - page 36

    Chapter 1: Understanding ISDN and the Express L128/L128T 61202.070L1-1 Express L128/L128T User Manual 19 Ordering ISDN When ordering ISDN from the telephone company, request EZ-ISDN 1 (Ca- pability Package U) to ensure it is set up properly. EZ-ISDN 1 is recommend- ed by the industry for most home office/small business applications. If this is not ...

  • ADTRAN L128T - page 37

    Chapter 1: Understanding ISDN and the Express L128/L128T 20 Express L128/L128T User Manual 61202.070L1-1 incoming HTTP, FTP, and mail server requests from the Internet to be trans- lated and forwarded to this address on the user network. Configuration The Express L128/L128T is configured using a menu-based interface. This in- terface can be accesse ...

  • ADTRAN L128T - page 38

    61202.070L1-1 Express L128/L128T User Manual 21 Chapter 2 Installation After unpacking the unit, immediately inspect it for possible shipping dam- age. If damage is discovered, file a claim immediately with the shipping car- rier; then contact the ADTRAN Repair and Return department. ISDN NETWORK CONNECTION The Express L128/L128T supports either di ...

  • ADTRAN L128T - page 39

    Chapter 2: Installation 22 Express L128/L128T User Manual 61202.070L1-1 TELEPHONE CONNECTION (L128T ONLY) Basic Telephone Service The Express L128T supports an analog DTMF telephone type (AT&T 2500) with the POTS interface, part number 1202070L2. Two telephones or other an- alog devices (like a fax machine or modem) plug into either RJ-11 jack ...

  • ADTRAN L128T - page 40

    Chapter 2: Installation 61202.070L1-1 Express L128/L128T User Manual 23 Table 2-A Using the Flash-Hook Calling a second party with an active call. Flash-hook to place active call on hold and dial new number. Hanging up will terminate the call. Answering an incoming call with an active call at call waiting. Flash-hook to place active call on hold an ...

  • ADTRAN L128T - page 41

    Chapter 2: Installation 24 Express L128/L128T User Manual 61202.070L1-1 Figure 2-1 Wiring Scheme 1: Use existing analog telephone equipment, but replace single analog telephone service with ISDN service To Telephone Company Yellow Red Green Black To Telephone Company Yellow Red Green Black Express L128/L128T 10-Base-T Phone U Personal Computer New ...

  • ADTRAN L128T - page 42

    Chapter 2: Installation 61202.070L1-1 Express L128/L128T User Manual 25 Figure 2-2 Wiring Scheme 2: Retain single analog telephone service and add ISDN service To Telephone Company Yellow Red Green Black To Telephone Company Yellow Red Green Black Express L128/L128T 10-Base-T Phone U Personal Computer New Wiring Scheme Red Green Ensure other yellow ...

  • ADTRAN L128T - page 43

    Chapter 2: Installation 26 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 44

    61202.070L1-1 Express L128/L128T User Manual 27 Chapter 3 Terminal Menu Operation and Structure TERMINAL MENU STRUCTURE The Express L128/L128T uses a multilevel menu structure containing both menu items and data fields. All menu operations and data display in the ter- minal menu window. The Express L128/L128T is shipped in the Factory De- fault con ...

  • ADTRAN L128T - page 45

    Chapter 3: Terminal Menu Operation and Structure 28 Express L128/L128T User Manual 61202.070L1-1 Figure 3-1 Top Level Terminal Menu Menu Path Describes the current position in the terminal menu structur e. Right Pane Lists available submenus. Additional submenus available through this pane are indicated by the [+] and [DA T A] symbols. Left Pane Li ...

  • ADTRAN L128T - page 46

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 29 Status The Status menu provides options to review and monitor the status of the Ex- press L128/L128T system. See the section Status Menu on page 90 for detailed information on the available options. Test The Test menu can be used for performing diagnost ...

  • ADTRAN L128T - page 47

    Chapter 3: Terminal Menu Operation and Structure 30 Express L128/L128T User Manual 61202.070L1-1 NAVIGATING THE TERMINAL MENUS The following sections provide information on how to navigate through the terminal menus. General Layout When you first start a terminal mode session, the window shown in Figure 3- 1 on page 28 displays. The screen is divid ...

  • ADTRAN L128T - page 48

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 31 Navigation with the Keyboard You can use different keystrokes to navigate through the terminal menu. Press Control-Z to activate a pop-up screen with the available keystrokes. The fol- lowing section provides a list of the available keystrokes and the r ...

  • ADTRAN L128T - page 49

    Chapter 3: Terminal Menu Operation and Structure 32 Express L128/L128T User Manual 61202.070L1-1 ConÞguration F Restores factory default settings. This setting r estores the factory defaults based on the location of the cursor . Entire submenus can be factory defaulted. C Copies selected items to the clipboard. The amount of information you can co ...

  • ADTRAN L128T - page 50

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 33 Security Levels Each menu item on the configuration screens has an associated security level. The security level ranges from 0 (highest security level) to 5 (lowest security level). This level determines whether a Telnet session can access that menu ite ...

  • ADTRAN L128T - page 51

    Chapter 3: Terminal Menu Operation and Structure 34 Express L128/L128T User Manual 61202.070L1-1 CONFIGURATION MENU Configuration/System Info The System Info menu provides basic information about the unit and displays data fields for editing information. Figure 3-2 displays the submenus avail- able under this menu item. Figure 3-2 Configuration/Sys ...

  • ADTRAN L128T - page 52

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 35 enter up to 31 alpha-numeric characters in this field, including spaces and spe- cial characters (such as an under bar). System Contact Write security: 3; Read security: 5 Provides a user configurable text string for the contact name. This field can con ...

  • ADTRAN L128T - page 53

    Chapter 3: Terminal Menu Operation and Structure 36 Express L128/L128T User Manual 61202.070L1-1 Configuration/WAN The WAN menu is used to set up the ISDN parameters for the Express L128/ L128T. Also, for the Express L128T, a POTS menu is provided. Figure 3-3 shows the WAN menu. You can run the L128/L128T with Frame Relay if you obtain the appropri ...

  • ADTRAN L128T - page 54

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 37 (LDN(s)) and area code. Enter the 7-digit LDN in LDN 1 and LDN 2 (if a sec- ond number exists). The area code must be entered. The message Auto Spid Success will appear in the Call Log to indicate success in determining the SPID. See Appendix B on page ...

  • ADTRAN L128T - page 55

    Chapter 3: Terminal Menu Operation and Structure 38 Express L128/L128T User Manual 61202.070L1-1 Dial Line/LDN 1 or 2 Write security: 2; Read security: 5 This option allows the entry of 0, 1, or 2 LDNs. The LDN is used when placing or receiving calls. The LDN is the local phone number assigned to the line. LDN 1 = 5 5 5 1 2 1 2 LDN 2 = 5 5 5 1 2 1 ...

  • ADTRAN L128T - page 56

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 39 ISDN/FEBEs Read security: 5 This contains the number of Far-End-Block-Errors (FEBEs) that have been de- tected by the ISDN circuitry on the other end of the link. Continuous errors can indicate a line problem, but a burst at one time is normal. WAN/POTS ...

  • ADTRAN L128T - page 57

    Chapter 3: Terminal Menu Operation and Structure 40 Express L128/L128T User Manual 61202.070L1-1 Configuration/IP The IP menu is used to set up the IP parameters for the Express L128/L128T. Any general IP-related configuration item is under this menu. Figure 3-4 shows the IP menu. Figure 3-4 Configuration/IP Screen IP/IP Address Write security: 2; ...

  • ADTRAN L128T - page 58

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 41 IP/Default Gateway Write security: 3; Read security: 5 The default gateway is used by the Express L128/L128T for sending IP packets whose destination address is not found in the route table. If this address is all zeros, then the first WAN connection be ...

  • ADTRAN L128T - page 59

    Chapter 3: Terminal Menu Operation and Structure 42 Express L128/L128T User Manual 61202.070L1-1 Static Routes/Private Write security: 4; Read security: 5 When set to No , the Express L128/L128T will advertise this static route using RIP. Otherwise, setting to Yes means that the route is kept private. IP/IP Router The IP router is configured under ...

  • ADTRAN L128T - page 60

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 43 RIP/Method Write security: 3; Read security: 5 Split Horizon - Only routes not learned on the Ethernet port are advertised. Poison Reverse (def) - All routes are advertised, including routes learned from the Ethernet port. These routes are poisoned. Non ...

  • ADTRAN L128T - page 61

    Chapter 3: Terminal Menu Operation and Structure 44 Express L128/L128T User Manual 61202.070L1-1 NAT/DHCP Renewal Time Write security: 3; Read security: 5 This is the number of hours that the DHCP server should allow the device be- fore it is required to send a new DHCP request. The default is 15 hours, and 0 represents an infinite lease. NAT/Web S ...

  • ADTRAN L128T - page 62

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 45 DNS/Server 2 Write security: 3; Read security: 5 This is the IP address for the secondary DNS device. It is used a back-up in case the primary address does not respond to the request. IP/UDP Relay The Express L128/L128T can be configured as a relay agen ...

  • ADTRAN L128T - page 63

    Chapter 3: Terminal Menu Operation and Structure 46 Express L128/L128T User Manual 61202.070L1-1 UDP Relay List/UDP Port 1, UDP Port 2, UDP Port 3 Write security: 3; Read security: 5 UDP Port 1, UDP Port 2, and UDP Port 3 are used for specifying UDP ports to be relayed. These fields only apply when UDP Port Type is set to Specified . IP/Proxy ARP W ...

  • ADTRAN L128T - page 64

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 47 Configuration/IPX The IPX menu is used to set up the IPX parameters for the Express L128/ L128T. Any general IPX-related configuration item can be found under this menu. Figure 3-5 shows the IPX menu. Figure 3-5 Configuration/IPX Screen IPX/Mode Write s ...

  • ADTRAN L128T - page 65

    Chapter 3: Terminal Menu Operation and Structure 48 Express L128/L128T User Manual 61202.070L1-1 IPX/Frame Type Write security: 2; Read security: 5 The Express L128/L128T supports all four defined IPX frame types. The pos- sible frame types are: Ether Type II (def), Ether 802.3 (Raw) , Ether 802.2 , or Ether SNAP (802.2 SNAP). Only one frame type c ...

  • ADTRAN L128T - page 66

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 49 IPX/SAP Timer Write security: 3; Read security: 5 This value specifies how often the Express L128/L128T sends out IPX SAP (Service Access Protocol) packets on the network segment attached to the Ethernet port. The SAP packets sent contain information ab ...

  • ADTRAN L128T - page 67

    Chapter 3: Terminal Menu Operation and Structure 50 Express L128/L128T User Manual 61202.070L1-1 Configuration/Bridge The Bridge menu is used to set up the bridge parameters for the Express L128/ L128T. The bridging function runs at the Media Access Control (MAC) level which allows any protocol packets that run over Ethernet to be forwarded. Bridgi ...

  • ADTRAN L128T - page 68

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 51 would negotiate PPP IPCP to exchange IP packets. However, if a device can only support PPP BCP, IP packets are encapsulated by the device as bridge packets. The Express L128/L128T can treat the WAN IP Bridge as a virtual Ethernet port connected only to ...

  • ADTRAN L128T - page 69

    Chapter 3: Terminal Menu Operation and Structure 52 Express L128/L128T User Manual 61202.070L1-1 WAN IPX Bridge/Network Write security: 2; Read security: 5 This is the network address of the virtual Ethernet port. See IPX/Network on page 47 for an explanation of the IPX network number. WAN IPX Bridge/Frame Type Write security: 2; Read security: 5 T ...

  • ADTRAN L128T - page 70

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 53 Spanning Tree/Priority Write security: 2; Read security: 5 This assigns a priority to the Express L128/L128T that permits the relative pri- ority of multiple bridges to be managed. The range is 0 to 65535 with a default of 32768. Spanning Tree/Maximum A ...

  • ADTRAN L128T - page 71

    Chapter 3: Terminal Menu Operation and Structure 54 Express L128/L128T User Manual 61202.070L1-1 LAN Port/Path Cost Write security: 2; Read security: 5 This is the cost of using the Ethernet port in the total cost of the path. The range is from 1 to 65535 with a default of 100 (for 10 Mbits/second). LAN Port/Priority Write security: 2; Read securit ...

  • ADTRAN L128T - page 72

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 55 WAN Port 1/Active Write security: 2; Read security: 5 This setup is exactly like WAN Port 0 above. WAN Port 1/Path Cost Write security: 2; Read security: 5 This setup is exactly like WAN Port 0 above. WAN Port 1/Priority Write security: 2; Read security ...

  • ADTRAN L128T - page 73

    Chapter 3: Terminal Menu Operation and Structure 56 Express L128/L128T User Manual 61202.070L1-1 Configuration/Security The Security menu is used to set up the authentication parameters needed to authenticate PPP connection over the ISDN B-channels. Also, the filter defines are placed under this menu. Figure 3-7 shows the Security menu. Figure 3-7 ...

  • ADTRAN L128T - page 74

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 57 Security/When Write security: 1; Read security: 2 The Express L128/L128T can be configured to authenticate the PPP peer (us- ing the above method) for incoming calls using Answer Only (def), or for out- going and incoming calls using Originate and Answe ...

  • ADTRAN L128T - page 75

    Chapter 3: Terminal Menu Operation and Structure 58 Express L128/L128T User Manual 61202.070L1-1 Radius Server/Retry Count Write security: 1; Read security: 2 This is the number of times the Express L128/L128T should send a request packet to the RADIUS server without a response before giving up. If the num- ber of attempts to communicate with the p ...

  • ADTRAN L128T - page 76

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 59 Security/Filter Defines The Express L128/L128T can filter packets based on certain parameters within the packet. The method used by the Express L128/L128T allows the highest flexibility for defining filters and assigning them to a Connection List profil ...

  • ADTRAN L128T - page 77

    Chapter 3: Terminal Menu Operation and Structure 60 Express L128/L128T User Manual 61202.070L1-1 Filter Defines /Pattern Filter Defines Write security: 2; Read security: 3 The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the bridge functionality of the Express L128/L128T. Up to 32 pattern defines can be ...

  • ADTRAN L128T - page 78

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 61 Dst Port Cmpr Type of comparison that is performed = - means ports equal to not = - means port not equal to > - means port greater than < - means port less than None - means the destination port is not compared Proto Protocol used for comparison. ...

  • ADTRAN L128T - page 79

    Chapter 3: Terminal Menu Operation and Structure 62 Express L128/L128T User Manual 61202.070L1-1 Dest Socket Comp Type of comparison that is performed: = - means socket equal to Not = - means socket not equal to > - means socket greater than < - means socket less than None - no comparison is done on destination socket Type 8-bit value which i ...

  • ADTRAN L128T - page 80

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 63 Configuration/Connection List The Express L128/L128T uses the Connection List to specify the profile each user or group of users are to have when connected. Each profile or item in the Connection List has many configurable parameters giving high flexibi ...

  • ADTRAN L128T - page 81

    Chapter 3: Terminal Menu Operation and Structure 64 Express L128/L128T User Manual 61202.070L1-1 Connection List/Description Write security: 3; Read security: 4 The description is a text string that identifies the profile. Connection List/Active Write security: 3; Read security: 4 When set to Yes (def), this profile is used for authentication and u ...

  • ADTRAN L128T - page 82

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 65 • When originating an outgoing call: - Express L128/L128T uses PPP method configured in Configuration/Security/PPP . - Authenticatee’s username is compared to profile used to dial. • Authenticating with RADIUS: - When Configuration/Security/Authen ...

  • ADTRAN L128T - page 83

    Chapter 3: Terminal Menu Operation and Structure 66 Express L128/L128T User Manual 61202.070L1-1 PAP, CHAP or EAP - The connection can be authenticated using PAP, CHAP or EAP. CHAP or EAP - The connection can be authenticated using CHAP or EAP only. EAP - The connection will only allow authentication by the peer using EAP. Authentication/Tx Usernam ...

  • ADTRAN L128T - page 84

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 67 Authentication/Call ID 1 Write security: 1; Read security: 3 The caller identification from the ISDN incoming call is compared to this num- ber, starting from the right digits. Authentication/Call ID 2 Write security: 1; Read security: 3 The caller iden ...

  • ADTRAN L128T - page 85

    Chapter 3: Terminal Menu Operation and Structure 68 Express L128/L128T User Manual 61202.070L1-1 Route/IP/Net Write security: 3; Read security: 5 The PPP peer’s IP address or network can be set here, if known. Leaving this at 0.0.0.0 means that the Express L128/L128T will determine the PPP peer’s IP and network using the PPP IPCP. Route/Netmask ...

  • ADTRAN L128T - page 86

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 69 IP/RIP The RIP parameters can be adjusted from their defaults under this menu. The RIP parameters for all WAN connections are set on a per-session basis. RIP/Mode Write security: 3; Read security: 5 The Express L128/L128T will perform RIP over the WAN c ...

  • ADTRAN L128T - page 87

    Chapter 3: Terminal Menu Operation and Structure 70 Express L128/L128T User Manual 61202.070L1-1 RIP/Retain Write security: 3; Read security: 5 When this Connection List entry is disconnected and this parameter is set to Yes , all routes learned from this WAN connection are retained and their rout- ing interface is set to idle. This permits dial-on ...

  • ADTRAN L128T - page 88

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 71 IPX/Retain Write security: 3; Read security: 5 When this Connection List entry is disconnected and this parameter is set to Yes , all routes learned from this WAN connection are retained and their rout- ing interface is set to idle. This permits dial-on ...

  • ADTRAN L128T - page 89

    Chapter 3: Terminal Menu Operation and Structure 72 Express L128/L128T User Manual 61202.070L1-1 Connection List/Bridge The Bridge menu contains the parameters needed for exchanging bridged packets with the PPP peer. Bridge/Mode Write security: 3; Read security: 5 When set to On (def), the Express L128/L128T will attempt to negotiate PPP BCP with t ...

  • ADTRAN L128T - page 90

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 73 Probe/Update Window Write security: 3; Read security: 5 This is the time the Express L128/L128T stays connected during a probe. Nor- mally route and service tables are exchanged immediately after connection. However, some routers could wait until their ...

  • ADTRAN L128T - page 91

    Chapter 3: Terminal Menu Operation and Structure 74 Express L128/L128T User Manual 61202.070L1-1 Multilink/BACP Write security: 3; Read security: 5 The Bandwidth Allocation Control Protocol (BACP) and Bandwidth Alloca- tion Protocol (BAP) are used to enhance Multilink PPP. Together, they allow phone numbers to be exchanged when more bandwidth is ne ...

  • ADTRAN L128T - page 92

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 75 PPP/Max Timer Write security: 3; Read security: 5 This value is the number of seconds to wait between unanswered configura- tion-requests. The possible values are 1 sec, 2 secs (def), 3 secs, 5 secs and 10 secs. PPP/Max Failure Write security: 3; Read s ...

  • ADTRAN L128T - page 93

    Chapter 3: Terminal Menu Operation and Structure 76 Express L128/L128T User Manual 61202.070L1-1 configured for voice service. In some areas, voice service costs less than data services. A speech call type does not always guarantee an end-to-end digital connection with some local and long distance carriers. Audio - Audio directs the call control so ...

  • ADTRAN L128T - page 94

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 77 Dial Out/Attempts Write security: 3; Read security: 5 This value is the number of attempts the Express L128/L128T will make before giving up on the connection. This is effective for manual dialing or dynamic bandwidth calls only. The range is from 1 (de ...

  • ADTRAN L128T - page 95

    Chapter 3: Terminal Menu Operation and Structure 78 Express L128/L128T User Manual 61202.070L1-1 When bandwidth is needed for another application, the idle timer is compared to this preempt time. If the idle timer is greater, the connection is preempted. If set to 255 (def), the connection is never preempted. If set to 0, the connection is disconne ...

  • ADTRAN L128T - page 96

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 79 Samples/Samples Write security: 3; Read security: 5 This is the number of WAN data rate samples taken before a decision to change bandwidth is performed. The range is 1 (def) to 255 samples. Samples/Time Between Changes Write security: 3; Read security: ...

  • ADTRAN L128T - page 97

    Chapter 3: Terminal Menu Operation and Structure 80 Express L128/L128T User Manual 61202.070L1-1 Filters/In Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries which can be combined using the opera- tions field. The operations are performed in the order they appear on the list. Active - Turns this entry active w ...

  • ADTRAN L128T - page 98

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 81 Filters/Out Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries. The setup is exactly the same as the Filter/ In Exceptions list. Filters/Demand Dial Write security: 2; Read security: 5 The demand dial filters have t ...

  • ADTRAN L128T - page 99

    Chapter 3: Terminal Menu Operation and Structure 82 Express L128/L128T User Manual 61202.070L1-1 Filters/Dem Dial Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries. The setup is exactly the same as the Filter/ In Exceptions list. ...

  • ADTRAN L128T - page 100

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 83 Configuration/Management The Express L128/L128T can be managed using Telnet, Simple Network Man- agement Protocol (SNMP), or the maintenance port. SNMP support is limited to MIB definitions. See Appendix C on page 139 for a description of the MIBs suppo ...

  • ADTRAN L128T - page 101

    Chapter 3: Terminal Menu Operation and Structure 84 Express L128/L128T User Manual 61202.070L1-1 Telnet/User List Up to four users can be configured for access to the Express L128/L128T. Each user can be assigned a privilege and time out. User List/Name Write security: 1; Read security: 3 A text string of the user name for this session. User List/A ...

  • ADTRAN L128T - page 102

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 85 Management/SNMP The Express L128/L128T is an SNMP agent. It can respond to Get-Requests and generate traps. These two lists set up the manager, communities, and lev- els. See Appendix C on page 139 for more information on SNMP. SNMP Access Write securit ...

  • ADTRAN L128T - page 103

    Chapter 3: Terminal Menu Operation and Structure 86 Express L128/L128T User Manual 61202.070L1-1 Traps/Manager Name Write security: 2; Read security: 4 This is the text string describing the name of the entry. It is intended for easy reference and has no bearing on the SNMP trap function. Traps/Manager IP Write security: 2; Read security: 4 This is ...

  • ADTRAN L128T - page 104

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 87 Maint Port/Parity Write security: 5; Read security: 5 This is the asynchronous parity that the maintenance port will run. The possi- ble values are None (def), Odd, or Even . Maint Port/Stop Bits Write security:5; Read security:5 This is the stop bit us ...

  • ADTRAN L128T - page 105

    Chapter 3: Terminal Menu Operation and Structure 88 Express L128/L128T User Manual 61202.070L1-1 DIAL MENU The Dial menu is used for dialing the Connection List profile setup under Con- figuration/Connection List and for checking the status of each Connection List. This list is in the same order as the Connection List entries. Figure 3-10 shows the ...

  • ADTRAN L128T - page 106

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 89 Dial/Hang Up Write security: 4; Read security: 5 This is an activator used for hanging up a Connection List entry. It also re- moves retained routes from the IP and IPX routing tables when the call is not connected. Place the cursor over the field and p ...

  • ADTRAN L128T - page 107

    Chapter 3: Terminal Menu Operation and Structure 90 Express L128/L128T User Manual 61202.070L1-1 STATUS MENU The Express L128/L128T’s Status menu contains comprehensive status and diagnostic information used in verifying configuration and identifying prob- lems. The menus are divided into protocol types and sessions. Figure 3-11 shows the Status ...

  • ADTRAN L128T - page 108

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 91 Call Sessions/Session1 and Call Sessions/Session2 Read security: 5 The Express L128/L128T can support up to two active connections at one time. These two menus reflect the results of PPP negotiations, user name, time con- nected, idle timer, and data ra ...

  • ADTRAN L128T - page 109

    Chapter 3: Terminal Menu Operation and Structure 92 Express L128/L128T User Manual 61202.070L1-1 Tx Link Rate - Current actual data transmission rate Rx Link Rate - Current actual data reception rate Tx Comp Ratio - Current transmission compression ratio Rx Comp Ratio - Current reception compression ratio Call Sessions/Spanning Tree Read security: ...

  • ADTRAN L128T - page 110

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 93 Status/Bridge Table Read security: 5 This lists the contents of the Express L128/L128T’s bridge table. Bridge Cache/MAC Address - Ethernet address for device learned Bridge Cache/Port - Port device learned from: LAN, WAN0, or WAN1 Bridge Cache/TTL - S ...

  • ADTRAN L128T - page 111

    Chapter 3: Terminal Menu Operation and Structure 94 Express L128/L128T User Manual 61202.070L1-1 IP Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here). IP Routes/TTL - Seconds until address is removed from table or “zombied.” Value of 999 means route is s ...

  • ADTRAN L128T - page 112

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 95 Status/IPX Servers Read security: 5 This lists the contents of the Express L128/L128T’s IPX server table. IPX Servers/Type - The server type IPX Servers/Name - The server name IPX Servers/Network - The server network address IPX Servers /Address - The ...

  • ADTRAN L128T - page 113

    Chapter 3: Terminal Menu Operation and Structure 96 Express L128/L128T User Manual 61202.070L1-1 Status/LAN Stats Read security: 5 This menu contains statistics for the Ethernet port. Tx Packets - Packets transmitted out the Ethernet port Rx Packets - Packets received from the Ethernet port Tx Errors - Total transmit errors encountered on Ethernet ...

  • ADTRAN L128T - page 114

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 97 ICMP redirected messages ICMP packet errors ICMP timeouts received ICMP messages sent ICMP messages received ICMP specif if errors IP datagrams reassembled IP datagrams sent IP datagrams received Total forwarded datagrams IP reassembly timeout Discarded ...

  • ADTRAN L128T - page 115

    Chapter 3: Terminal Menu Operation and Structure 98 Express L128/L128T User Manual 61202.070L1-1 TEST MENU The Express L128/L128T’s Test menu contains built in tests that can be used to diagnose problems. Figure 3-12 shows the Test menu screen. Figure 3-12 Test Screen The following tests can be run: Test Menu/Echo Request Write security: 4, Read ...

  • ADTRAN L128T - page 116

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 99 LOGS MENU The Logs menu contain logs displaying important information about the run- ning condition of the Express L128/L128T. The logs can be set to capture di- agnostics of error conditions only by way of a log level. The levels are divided up as foll ...

  • ADTRAN L128T - page 117

    Chapter 3: Terminal Menu Operation and Structure 100 Express L128/L128T User Manual 61202.070L1-1 PPP Log/Active When set to Yes (def), PPP events below or equal the log level are logged into the log. PPP Log/Wrap When set to Yes (def), new PPP events will overwrite old PPP events when the log is full. All logging will stop when the log is full and ...

  • ADTRAN L128T - page 118

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 101 Call Log/Wrap When set to Yes (def), new Call events will overwrite old Call events when the log is full. All logging will stop when the log is full and set to No . Call Log/Level In order to log events, they must be at or below this level. Range is 0 ...

  • ADTRAN L128T - page 119

    Chapter 3: Terminal Menu Operation and Structure 102 Express L128/L128T User Manual 61202.070L1-1 Network Log/Level In order to log events, they must be at or below this level. Range is 0 to 6. The default is 3. Network Log/View This menu displays the log list. The fields are as follows: Date/Time - Date and time event occurred. Level - Level assoc ...

  • ADTRAN L128T - page 120

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 103 UTILITIES MENU The Express L128/L128T has utilities embedded in it to help manage and test the network and to facilitate software upgrades. Figure 3-14 shows the Utilities menu. Figure 3-14 Utilities Screen Utilities/Ping Write security: 4; Read securi ...

  • ADTRAN L128T - page 121

    Chapter 3: Terminal Menu Operation and Structure 104 Express L128/L128T User Manual 61202.070L1-1 Utilities/Telnet Client Write security: 4; Read security: 5 The Telnet menu can be used to activate the telnet client function in the Ex- press L128/L128T. Host - IP address or domain name (if DNS is configured) of Telnet server. Activate - Starts Teln ...

  • ADTRAN L128T - page 122

    Chapter 3: Terminal Menu Operation and Structure 61202.070L1-1 Express L128/L128T User Manual 105 Upgrade/Start Transfer This activator is used when the configurable items in this menu are complete. Once started, the Express L128/L128T will prompt for erasing the flash. When the flash is erased and the upgrade transfer fails, do not turn off the un ...

  • ADTRAN L128T - page 123

    Chapter 3: Terminal Menu Operation and Structure 106 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 124

    61202.070L1-1 Express L128/L128T User Manual 107 Chapter 4 Troubleshooting When the Express L128/L128T powers up, it performs an internal self-test. This takes about 10 seconds. At the end of the test, the PWR LED should flash. IF SELF-TEST FAILS If the PWR LED is not on or continuously flashes, the following steps will ver- ify whether or not the ...

  • ADTRAN L128T - page 125

    Chapter 4: Troubleshooting 108 Express L128/L128T User Manual 61202.070L1-1 probably something wrong with the translation of the line. The phone ser- vice provider should be able to help. 3. If the PWR LED still flashes, there is a physical problem with the phone line (more than likely, a problem with the Layer 1 setup). The problem is in one or mo ...

  • ADTRAN L128T - page 126

    Chapter 4: Troubleshooting 61202.070L1-1 Express L128/L128T User Manual 109 H. With the Express L128/L128T connected to the line and powered up, talk to your service provider’s repair group and inform them that your ISDN basic rate line has a physical Layer 1 problem. Ask them to check the line. Tell them that you have an NT1-like device at the e ...

  • ADTRAN L128T - page 127

    Chapter 4: Troubleshooting 110 Express L128/L128T User Manual 61202.070L1-1 5. If the Loop Status in the Express L128/L128T Status menu continuously reads Register SPID #1 , then the Express L128/L128T is physically con- nected to your local telephone service provider and has established logical layer 2. The Express L128/L128T is unable to establis ...

  • ADTRAN L128T - page 128

    Chapter 4: Troubleshooting 61202.070L1-1 Express L128/L128T User Manual 111 6. If the Loop Status in the Express L128/L128T Status menu continuously reads Getting TEI #2 , the Express L128/L128T has completely initialized the first phone number but is unable to establish logical layer 2 for the sec- ond phone number. The problem is in one or both o ...

  • ADTRAN L128T - page 129

    Chapter 4: Troubleshooting 112 Express L128/L128T User Manual 61202.070L1-1 To isolate the problem, perform the following procedure: A. Ensure the line is multipoint with two phone numbers. B. Ensure that the Express L128/L128T is set up with the correct SPID and LDN. For example: SPID1 = 20572270460101 SPID2 = 20572270470101 LDN 1 = 7227046 LDN 2 ...

  • ADTRAN L128T - page 130

    Chapter 4: Troubleshooting 61202.070L1-1 Express L128/L128T User Manual 113 IF YOU ARE UNABLE TO CONNECT CALLS See Table 4-A for corrective actions if you cannot connect calls. Table 4-A Troubleshooting Calls Condition Corrective Action The PWR LED remains on, but calls cannot be placed. Most likely a problem exists in the software setup (translati ...

  • ADTRAN L128T - page 131

    Chapter 4: Troubleshooting 114 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 132

    61202.070L1-1 Express L128/L128T User Manual 115 Chapter 5 Specifications SPECIFICATIONS AND FEATURES This section describes the standard specifications and features incorporated in the Express L128/L128T. Network Interface RJ-45 for ISDN Basic Rate U-Interface or RJ-45 for leased 2B1Q service. Ethernet Interface (LAN) Ethernet/IEEE 802.3 10BaseT. ...

  • ADTRAN L128T - page 133

    Chapter 5: Specifications 116 Express L128/L128T User Manual 61202.070L1-1 • Supports 2 phones (27 mA loop current each) at 600 ft, 24 AWG • Supports 5 phones (12 mA loop current each) at 300 ft, 24 AWG • Supports 4 phones (15 mA loop current each) at 300 ft, 24 AWG • Supports 3 phones (19 mA loop current each) at 300 ft, 24 AWG • Support ...

  • ADTRAN L128T - page 134

    61202.070L1-1 Express L128/L128T User Manual 117 Appendix A Loop Status Messages The Express L128/L128T displays current loop status of the ISDN on the bot- tom center line of the terminal screen. The following messages are defined: AutoSpid Download The Express L128/L128T is performing the LUCENT SPID download feature. AutoSpid X A SPID is being a ...

  • ADTRAN L128T - page 135

    Appendix A: Loop Status Messages 118 Express L128/L128T User Manual 61202.070L1-1 Echo: Tx: X Rx: Y The current transmit and receive count for the PPP echo request test. Getting TEI #1 The Express L128/L128T’s ISDN layer 1 is up and is now getting the first TEI from the ISDN network. Getting TEI #2 The Express L128/L128T’s ISDN layer 1 is up an ...

  • ADTRAN L128T - page 136

    Appendix A: Loop Status Messages 61202.070L1-1 Express L128/L128T User Manual 119 Register SPID #1 The Express L128/L128T’s ISDN layer 1 and 2 is up and is now registering SPID 2 with the ISDN network. RINGING An incoming call is ringing. B1 and B2 Bearer Channel Status Messages 56K Connected at 56K call type. 64K Connected at 64K call type. Audi ...

  • ADTRAN L128T - page 137

    Appendix A: Loop Status Messages 120 Express L128/L128T User Manual 61202.070L1-1 Routing Incoming call state in transition . Waiting Call is between states or waiting for switch. ...

  • ADTRAN L128T - page 138

    61202.070L1-1 Express L128/L128T User Manual 121 Appendix B Log Messages The Express L128/L128T Logs menu contains messages of events that occur. The definitions for some of those log messages are as follows: PPP Log Messages B-Channels bundled level 5 Both B-channels are bundled under multilink PPP going to a single PPP peer. BACP <X> down l ...

  • ADTRAN L128T - page 139

    Appendix B: Log Messages 122 Express L128/L128T User Manual 61202.070L1-1 Can't find user profile level 2 The Express L128/L128T could not find an appropriate user profile for an in- coming call. Make sure that a profile has been entered under Configuration/ Connection List or that a default profile exists. A default profile is one which has t ...

  • ADTRAN L128T - page 140

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 123 IPXCP <X> down level 5 IPX Control Protocol port <X> has been dropped between Express L128/ L128T and PPP peer. IPXCP <X> up level 5 IPX Control Protocol port <X> has been successfully negotiated between Ex- press L128/L128T and PPP peer. LCP <X> ...

  • ADTRAN L128T - page 141

    Appendix B: Log Messages 124 Express L128/L128T User Manual 61202.070L1-1 No IP addr for peer level 2 The Express L128/L128T cannot continue the connection because there was no IP address received from the PPP peer or it was not set in Configuration/Con- nection List/IP/Route/IP/Net parameter. No more bundles avail level 3 The Express L128/L128T ca ...

  • ADTRAN L128T - page 142

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 125 Peer failed PAP authen level 3 The PPP peer’s reported PAP username and/or password does not match the Express L128/L128T’s parameters. This is most likely caused by PPP peer sending incorrect username and/or password. Make sure the Configuration/ Connection List/Authenti ...

  • ADTRAN L128T - page 143

    Appendix B: Log Messages 126 Express L128/L128T User Manual 61202.070L1-1 AutoSpid Download Started level 4 Lucent AutoSpid download feature has started. AutoSpid Failed level 2 ExpertISDN has failed trying to determine the ISDN line’s SPID format. This can occur if the telephone company is not using standard SPID formats. AutoSpid Passed level 4 ...

  • ADTRAN L128T - page 144

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 127 Bandwidth drop level 4 The Express L128/L128T is dropping a B-channel call in order to reduce band- width. Bandwidth request level 4 The Express L128/L128T is dialing another B-channel in order to increase bandwidth. Bandwidth Restore level 4 The Express L128/L128T is re-dial ...

  • ADTRAN L128T - page 145

    Appendix B: Log Messages 128 Express L128/L128T User Manual 61202.070L1-1 CallID 1 in use level 2 An outgoing call on LDN 1 was dumped because it was already busy with a call. CallID 2 in use level 2 A outgoing call on LDN 2 was dumped because it was already busy with a call. Can't answer, Call not ringing level 1 Internal error as a result of ...

  • ADTRAN L128T - page 146

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 129 NETWORK_CONGESTION NETWORK_OUT_OF_ORDER NO_CIRCUIT_AVAILABLE NO_ROUTE NO_ROUTE_TO_DEST NO_USER_RESPONDING NON_SEL_USER_CLEAR NONEXISTENT_MSG NORMAL_CLEARING NUMBER_CHANGED OUTGOING_CALL_BARRED PRE_EMPTED PROTOCOL_ERROR REQ_CHANNEL_NOT_AVAIL RESOURCE_UNAVAIL SERVICE_NOT_AVAIL ...

  • ADTRAN L128T - page 147

    Appendix B: Log Messages 130 Express L128/L128T User Manual 61202.070L1-1 Connected <number> level 5 A call from or to <number> was connected. If no caller ID is available for the ISDN line then <number> will be blank for incoming calls. Demand calling ‘<user>’ level 4 A new call is being placed due to incoming packet ro ...

  • ADTRAN L128T - page 148

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 131 Fallback to 56K level 4 The Express L128/L128T is re-dialing the same destination at 56K call type be- cause the 64K call type failed. FarDN=<number> level 5 This is far-end directory number for an incoming call. Hangup <number> level 5 A call from or to <numbe ...

  • ADTRAN L128T - page 149

    Appendix B: Log Messages 132 Express L128/L128T User Manual 61202.070L1-1 L2 #2 not up level 2 A call attempt was stopped because ISDN layer 2 is down trying to get second TEI. L3 not up level 2 A call attempt was stopped because ISDN layer 3 is down trying to register first SPID. L3 #2 not up level 2 A call attempt was stopped because ISDN layer 3 ...

  • ADTRAN L128T - page 150

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 133 NOT end2end ISDN level 4 The path that the call was routed over is not ISDN from end-to-end. This is a warning and is most often seen for POTS calls. Power Up - last down cause: <reason> level 0 (displayed as level 1 after the unit is reset) This is the <reason> f ...

  • ADTRAN L128T - page 151

    Appendix B: Log Messages 134 Express L128/L128T User Manual 61202.070L1-1 Retrieved <number> level 5 The Express L128/L128T has retrieved a previously held call. If no caller ID is available for the ISDN line, then <number> will be blank for incoming calls. Ring <number> level 5 An incoming call from <number> was ringing. If ...

  • ADTRAN L128T - page 152

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 135 DHCP response sent level 4 A DHCP response was successfully sent to requesting device. DHCP socket failed level 1 Internal error occurred when attempting to start DHCP server. DHCP: Host not added to ARP table level 2 The DHCP server could not add requesting host to ARP table ...

  • ADTRAN L128T - page 153

    Appendix B: Log Messages 136 Express L128/L128T User Manual 61202.070L1-1 telclient bad host level 2 Telnet client could not use host name or IP address set in Configuration/Util- ities/Telnet Client/Host. telclient bad init level 2 Telnet client could not initialize a session. Telnet Client: Clr TCBF_BUFFER flag failed level 6 Debugging message re ...

  • ADTRAN L128T - page 154

    Appendix B: Log Messages 61202.070L1-1 Express L128/L128T User Manual 137 TELNETD: Clr TCBF_BUFFER flag failed level 6 Debugging message related to Telnet client function. TELNETD: could not obtain peer ip level 2 Telnet server function could not get IP address of Telnet client. TELNETD: Session failed, error level 2 A Telnet server session has fai ...

  • ADTRAN L128T - page 155

    Appendix B: Log Messages 138 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 156

    61202.070L1-1 Express L128/L128T User Manual 139 Appendix C SNMP Understanding SNMP As Local Area Network (LAN) environments became standardized over the past ten years, multi-vendor equipment grew with competition. It became necessary to manage the various vendor equipment from a single control con- sole. Thus, the Simple Network Management Protoc ...

  • ADTRAN L128T - page 157

    Appendix C: SNMP 140 Express L128/L128T User Manual 61202.070L1-1 Using SNMP Version 1, the network manager can issue three types of com- mands: • GetRequest : This command retrieves a single item or the first in a series from a network device. • GetNextRequest : This command retrieves the next item in a series from a network device. • SetReq ...

  • ADTRAN L128T - page 158

    Appendix C: SNMP 61202.070L1-1 Express L128/L128T User Manual 141 Communities The Express L128/L128T permits up to eight communities to be defined. The privilege level of each community can be set. The default community is public with read-only privileges. When the IP address is all zeros, any manager of the community can access the Express L128/L1 ...

  • ADTRAN L128T - page 159

    Appendix C: SNMP 142 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 160

    61202.070L1-1 Express L128/L128T User Manual 143 Appendix D Connector Pinouts Table D-A IBM/AT Style EIA-232 Interface I = Input O = Output N/A = Not Applicable N/C = Not Connected Table D-B RJ-45 ISDN Pin Name I/O Description 1 CD N/C Carrier Detect 2 RD O Receive Data 3 TD I T ransmit Data 4 DTR N/C Data T er minal Ready 5 GND N/A Signal Ground 6 ...

  • ADTRAN L128T - page 161

    Appendix D: Connector Pinouts 144 Express L128/L128T User Manual 61202.070L1-1 Table D-C RJ-11 POTS Table D-D 10BaseT Ethernet The switch position can be set for either TO NIC or T O HUB on the back panel of the Express L128/L128T. The rear panel is illustrated in Figure 1-7 on page 18. Pin 3 Ring Pin 4 Tip Switch Position TO NIC TO HUB Pin 1 TX1 R ...

  • ADTRAN L128T - page 162

    61202.070L1-1 Express L128/L128T User Manual 145 Appendix E Terminal Mode Commands The Express L128/L128T supports a command line interface. All menu op- tions are configurable and readable from the terminal mode. Additional com- mands are also available. Menu Commands Every menu item in the menu structure can be accessed through the terminal mode ...

  • ADTRAN L128T - page 163

    Appendix E: Terminal Mode Commands 146 Express L128/L128T User Manual 61202.070L1-1 One of the following key words must be used first: Some examples are listed below: isdn spid_1 20555512340101 sets spid 1 telnet user 1 name ÒguestÓ sets user name for telnet user list entry 1 to “guest” dial 3 dial dials the numbers for connection list profil ...

  • ADTRAN L128T - page 164

    Appendix E: Terminal Mode Commands 61202.070L1-1 Express L128/L128T User Manual 147 Additional Commands Other commands available from the terminal mode are given below: Download/Uploading Configuration The Express L128/L128T’s configuration can be captured to a text file using the download command. The text file can be edited if required. Upload ...

  • ADTRAN L128T - page 165

    Appendix E: Terminal Mode Commands 148 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 166

    61202.070L1-1 Express L128/L128T User Manual 149 Appendix F Frame Relay Firmware Version The L128/L128T can be used with Frame Relay if you obtain the appropriate firmware by calling ADTRAN Technical Support at the number listed in the back of this manual. Configuration/Frame Relay Figure F-01 shows the Configuration/Frame Relay menu that appears w ...

  • ADTRAN L128T - page 167

    Appendix F: Frame Relay Firmware Version 150 Express L128/L128T User Manual 61202.070L1-1 Frame Relay/Maintenance Protocol Write security: 3, Read security: 5 The Frame Relay maintenance protocol is used on the WAN port. The main- tenance protocol is used to send link status and virtual circuit information be- tween Frame Relay switches and other d ...

  • ADTRAN L128T - page 168

    Appendix F: Frame Relay Firmware Version 61202.070L1-1 Express L128/L128T User Manual 151 When more than one DLCI mapping is listed, the Express L128/L128T will try to match the DLCIs learned from the Frame Relay switch with the DLCI values in the map. If there is a match, the protocols specified in the map are used. However, if an active DLCI is n ...

  • ADTRAN L128T - page 169

    Appendix F: Frame Relay Firmware Version 152 Express L128/L128T User Manual 61202.070L1-1 IP Map/IARP Write security: 3, Read security: 5 When this is set to Yes (def), the Express L128/L128T will send Inverse ARP packets in order to determine the IP address on the other end of the virtual cir- cuit. If the IARP is responded to, a route is placed i ...

  • ADTRAN L128T - page 170

    Appendix F: Frame Relay Firmware Version 61202.070L1-1 Express L128/L128T User Manual 153 IP Map/RIP Method Write security: 3, Read security: 5 The way the RIP protocol sends out its advertisements is specified here: None - All routes in the router table are advertised out this virtual circuit with no modification of the metrics. Split Horizon (def ...

  • ADTRAN L128T - page 171

    Appendix F: Frame Relay Firmware Version 154 Express L128/L128T User Manual 61202.070L1-1 IPX Map/IARP Write security: 3, Read security: 5 When this is set to Yes (def), the Express L128/L128T will send Inverse ARP packets to determine the IPX network on the other end of the virtual circuit. If the IARP is responded to, a route is placed in the IPX ...

  • ADTRAN L128T - page 172

    Appendix F: Frame Relay Firmware Version 61202.070L1-1 Express L128/L128T User Manual 155 DLCI Mapping/Filters The Express L128/L128T can block packets in and out of a PVC port by use of the filters. They are set up in two steps: 1) define the types of packets that would be of interest in the Configuration/Security/Filter Defines menu, and 2) set u ...

  • ADTRAN L128T - page 173

    Appendix F: Frame Relay Firmware Version 156 Express L128/L128T User Manual 61202.070L1-1 Next Oper - The next operation to use to combine with the next filter in the list: END - the last filter to combination. AND - logically AND this filter with the next filter in the list. OR - logically OR this filter with the next filter in the list. Filters/O ...

  • ADTRAN L128T - page 174

    Appendix F: Frame Relay Firmware Version 61202.070L1-1 Express L128/L128T User Manual 157 Status/Sessions Figure F-02 shows the Status/Sessions menu that appears when using the Frame Relay firmware. The additional menu choices available with this option are described following the figure. Figure F-02 Status/Sessions Screen (with Frame Relay) Sessio ...

  • ADTRAN L128T - page 175

    Appendix F: Frame Relay Firmware Version 158 Express L128/L128T User Manual 61202.070L1-1 IPXCP - Shows UP if PPP IPX Control Protocol has negotiated successfully User - Displays the user name of the PPP peer Number(s) - Shows the phone number dialed if outgoing call or caller ID if incoming call. Connect Time - Shows the date and time when the cal ...

  • ADTRAN L128T - page 176

    Appendix F: Frame Relay Firmware Version 61202.070L1-1 Express L128/L128T User Manual 159 Rx Frames - Number of Frame Relay packets that have been received via this DLCI. Tx Bytes - Number of Frame Relay bytes that have been transmitted via this DLCI. Rx Bytes - Number of Frame Relay bytes that have been received via this DLCI. IP SubIfc - The IP r ...

  • ADTRAN L128T - page 177

    Appendix F: Frame Relay Firmware Version 160 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 178

    61202.070L1-1 Express L128/L128T User Manual 161 Glossary 10Base2 IEEE 802.3 specification, similar to Ethernet, using thin coaxial cable that runs at 10 Mbps, with a maximum distance of 185 meters per segment. Also known as Thin Ethernet or Thinwire Ethernet. 10BaseT IEEE 802.3 specification, using unshielded twisted-pair cabling and running at 10 ...

  • ADTRAN L128T - page 179

    Glossary 162 Express L128/L128T User Manual 61202.070L1-1 central office (CO) In telephony, the phone company switching facility or center, usually a Class 5 end office, at which subscribers local loops terminate. Handles a specific geographic area, identified by the first three digits of the local telephone num- ber. Usually the facilities of the ...

  • ADTRAN L128T - page 180

    Glosssary 61202.070L1-1 Express L128/L128T User Manual 163 hop count A routing metric used to measure the distance between a source and a desti- nation. Particularly used by RIP. hub (1) Communications center, (2) Major routing station for connecting channels, (3) DDS connecting center. IEEE Institute of Electrical and Electronic Engineers. Profess ...

  • ADTRAN L128T - page 181

    Glossary 164 Express L128/L128T User Manual 61202.070L1-1 interworking Communication between two types of networks or end equipment. This may or may not involve a difference in signalling or protocol elements supported. Internet Protocol A TCP/IP protocol describing software that tracks the Internet address of nodes, routes outgoing message, and re ...

  • ADTRAN L128T - page 182

    Glosssary 61202.070L1-1 Express L128/L128T User Manual 165 message The Layer 3 information that is passed between the CPE and SPCS for signal- ling. multipoint line A communications line having multiple cable access points. Name Binding Protocol (NBP) The AppleTalk transport-level protocol that translates a character string name into the internet a ...

  • ADTRAN L128T - page 183

    Glossary 166 Express L128/L128T User Manual 61202.070L1-1 point-to-point protocol (PPP) An implementation of TCP/IP which is intended for transmission using tele- phone lines. PPP provides router-to-router and host-to-network connections over both synchronous and asynchronous circuits. poison routes Routes which have an infinite metric which to oth ...

  • ADTRAN L128T - page 184

    Glosssary 61202.070L1-1 Express L128/L128T User Manual 167 serving area Region surrounding a broadcasting station where signal strength is at or above a stated minimum. The geographic area handled by a telephone central office facility. Generally equivalent to a LATA. SNMP Simple Network Management Protocol. SNMP provides a means to monitor and set ...

  • ADTRAN L128T - page 185

    Glossary 168 Express L128/L128T User Manual 61202.070L1-1 Telnet The TCP/IP standard protocol for remote terminal connection service. Telnet allows a user at one site to interact with a remote timesharing system at anoth- er site as if the user's terminal were connected directly to the remote machine. TCP/IP Transmission Control Protocol/Inter ...

  • ADTRAN L128T - page 186

    Glosssary 61202.070L1-1 Express L128/L128T User Manual 169 U-interface A twisted pair subscriber loop that connects the NT1 reference point to the ISDN network, as defined in the I.411 Recommendation. This interface pro- vides Basic Rate Access with an operating frequency of 160 kbps and an infor- mation rate of 144 kbps. Under U.S. regulations, th ...

  • ADTRAN L128T - page 187

    Glossary 170 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 188

    61202.070L1-1 Express L128/L128T User Manual 171 Acronyms AEP ................... AppleTalk Echo Protocol AMI ................... Alternate Mark Inversion ARP ................... Address Resolution Protocol B (Channel) .... A 64 kbps digital information channel BCP ................... Bridge Control Protocol BONDING ...... Bandwidth On Demand Inter ...

  • ADTRAN L128T - page 189

    Acronyms 172 Express L128/L128T User Manual 61202.070L1-1 ISDN ..................Integrated Services Digital Network ISO .....................International Standardization Organization ISP ......................Internet Service Provider kbps ...................Kilobits per second kHz ....................Kilohertz LAN ...................Local Area N ...

  • ADTRAN L128T - page 190

    61202.070L1-1 Express L128/L128T User Manual 173 Index Numerics 10-base-T interface 144 56K 76 64K 76 A address table 55 address table/aging 55 address table/forward policy 55 agent 139, 140 applications multiple users to ISP using NAT 10 single user to corporate LAN 8 single user to ISP using NAT 9 SOHO to corporate LAN 11 area code 37 ARP cache 9 ...

  • ADTRAN L128T - page 191

    Index 174 Express L128/L128T User Manual 61202.070L1-1 bridge/WAN IPX bridge 51 bridging 13 concurrent routing and bridging 15 demand 12 C call log 100 call log messages 125 call log/active 100 call log/clear 101 call log/level 101 call log/view 101 call log/wrap 101 call sessions 90 call sessions/session1 and session2 91 call sessions/spanning tre ...

  • ADTRAN L128T - page 192

    Index 61202.070L1-1 Express L128/L128T User Manual 175 dial line 36 dial line/area code 37 dial line/ExpertISDN 36 dial line/LDN 1 or 2 38 dial line/SPID 1 37 dial line/switch protocol 37 dial menu 27, 88 dial out 75 dial out/attempts 77 dial out/call type 75 dial out/connection timeout 76 dial out/delay 76 dial out/initial channels 77 dial out/num ...

  • ADTRAN L128T - page 193

    Index 176 Express L128/L128T User Manual 61202.070L1-1 frame relay/DLCI mapping 150 frame relay/maintenance protocol 150 frame relay/polling frequency 150 frame type 48 front panel 16 G GetNextRequest 140 H hang up 14 hang-up 13 hello time 53 I idle timeout 13 IETF 19 if the Express L128/L128T does not read ready 107 if you are unable to connect ca ...

  • ADTRAN L128T - page 194

    Index 61202.070L1-1 Express L128/L128T User Manual 177 IPX/RIP timer 48 IPX/SAP timer 49 IPX/seed status 48 IPX/triggered 70 IPX/type 20 packets 71 ISDN connection 18 network connection 21 ordering 19 overview 7 setting up the line 1 ISDN line selecting mode 36 ISDN/dial line 36 ISDN/FEBEs 39 ISDN/leased line 38 ISDN/NEBEs 38 ISP 19 L LAN bridge 11 ...

  • ADTRAN L128T - page 195

    Index 178 Express L128/L128T User Manual 61202.070L1-1 internet access using 2 network connection ISDN 21 network device GetResponse 140 network interface 115 network log 101 network log messages 134 network log/active 101 network log/clear 102 network log/level 102 network log/view 102 network log/wrap 101 network manager 139 GetRequest 140 none 4 ...

  • ADTRAN L128T - page 196

    Index 61202.070L1-1 Express L128/L128T User Manual 179 RIP 12, 15, 42, 69 RIP timer 48 RIP/direction 43, 69 RIP/method 43, 69 RIP/mode 42, 69 RIP/protocol 42, 69 RIP/retain 70 RIP/triggered 69 RIP/V2 secret 43 RJ-11 interface 144 RJ-45 interface 143 route/force IP 68 route/hops 68 route/IP/net 68 route/netmask 68 route/private 68 route/static route ...

  • ADTRAN L128T - page 197

    Index 180 Express L128/L128T User Manual 61202.070L1-1 status/bridge table 93 status/call sessions 90 status/IP routes 93 status/IP stats 96 status/IPX routes 94 status/IPX servers 95 status/LAN stats 96 status/sessions 157 status/sessions screen 157 status/WAN stats 95 stop bits 87 subnet mask 40 supplementary services 22 switch compatibility 115 ...

  • ADTRAN L128T - page 198

    Index 61202.070L1-1 Express L128/L128T User Manual 181 user list/password 84 using keyboard to navigate menu 31 utilities menu 29, 103 utilities/exit 105 utilities/ping 103 utilities/Telnet client 104 utilities/upgrade menu 104 V VJ compression 74 W WAN indicators 17 WAN IP bridge 50 WAN IP bridge proxy ARP 51 WAN IP bridge/netmask 51 WAN IP bridge ...

  • ADTRAN L128T - page 199

    Index 182 Express L128/L128T User Manual 61202.070L1-1 ...

  • ADTRAN L128T - page 200

    Product Support Information Presales Inquiries and Applications Support Please contact your local distributor, ADTRAN Applications Engineering, or ADTRAN Sales: Post-Sale Support Please contact your local distributor first. If your local distributor cannot help, please contact ADTRAN Technical Support and have the unit serial number available. Repa ...

Manufacturer ADTRAN Category Network Router

Documents that we receive from a manufacturer of a ADTRAN L128T can be divided into several groups. They are, among others:
- ADTRAN technical drawings
- L128T manuals
- ADTRAN product data sheets
- information booklets
- or energy labels ADTRAN L128T
All of them are important, but the most important information from the point of view of use of the device are in the user manual ADTRAN L128T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ADTRAN L128T, service manual, brief instructions and user manuals ADTRAN L128T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ADTRAN L128T.

Similar manuals

A complete manual for the device ADTRAN L128T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ADTRAN L128T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ADTRAN L128T.

A complete ADTRAN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ADTRAN L128T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ADTRAN L128T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ADTRAN L128T, that we can find in the current document
3. Tips how to use the basic functions of the device ADTRAN L128T - which should help us in our first steps of using ADTRAN L128T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ADTRAN L128T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ADTRAN L128T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ADTRAN L128T?

Use the form below

If you did not solve your problem by using a manual ADTRAN L128T, ask a question using the form below. If a user had a similar problem with ADTRAN L128T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)