English dropdown-ico

Manual Porter-Cable 6602

11 pages 0.14 mb
Download

Go to site of 11

Summary
  • Porter-Cable 6602 - page 1

    Double Insulated Shear Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ IMPORTANT ...

  • Porter-Cable 6602 - page 2

    2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints, · crystalline silica from bricks and cement and other masonry products, and · arsenic ...

  • Porter-Cable 6602 - page 3

    3 influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoi ...

  • Porter-Cable 6602 - page 4

    4 SPECIFIC SAFETY RULES AND SYMBOLS FOR SHEARS 1. ALWAYS hold the tool as instructed in HOW TO HOLD TOOL section. This will prevent accidental shock resulting from cutting a live wire when cutting into a wall or other blind area. 2. KEEP hands away from cutting area. 3. ALWAYS use sharp cutting tools. 4. STAY CLEAR of end pieces that may fall after ...

  • Porter-Cable 6602 - page 5

    REPLACEMENT P ARTS When servicing use only identical replacement parts. MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C. current only. Refer to the spec ...

  • Porter-Cable 6602 - page 6

    6 Fig. 1 OPERA TION HOW TO HOLD SHEAR WARNlNG: The gear housing, intermediate plate, and cutting head may be made live if the tool cuts into live wiring. To prevent accidental shock, the tool must be held as shown in Fig. 1. TO ST ART AND STOP SHEAR CAUTION: Make sure switch is in OFF position and hands, body and clothing are clear of cutting head ...

  • Porter-Cable 6602 - page 7

    7 HOW TO USE SHEAR Model 6602: Be sure the material to be sheared is firmly supported. Clamping is recommended to insure control of the tool and the workpiece. Place side knives of shear slightly on the edge of the top side of the workpiece to steady tool. Squeeze the trigger switch and guide shear into work. The tool cuts freely with only slight p ...

  • Porter-Cable 6602 - page 8

    8 1. Place the side knives (D) and (E) back into the shear housing, insert a cap screw through center hole in shear housing, side knife (E), spacer bushing (C), side knife, (D), and thread screw into housing threads one or two turns. DO NOT TIGHTEN. 2. Coat remaining spacer bushing (C) with lubricant and insert into hole in center blade (F). Start ...

  • Porter-Cable 6602 - page 9

    9 SERVICING THE ECCENTRIC BEARING (see Fig. 4) NOTE: For model 6602 only, Model 6604 does not require this service. Once every three months, depending upon usage, remove the shear head from the power unit following the instructions in the REPLACING CUTTERS section of the manual. CAUTION: DISCONNECT TOOL FROM POWER SOURCE BEFORE DISASSEMBLING. Put a ...

  • Porter-Cable 6602 - page 10

    10 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material du ...

  • Porter-Cable 6602 - page 11

    The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABLE ® , QUICKSAND ® , SANDTRAP ® , S ...

Manufacturer Porter-Cable Category Trimmer

Documents that we receive from a manufacturer of a Porter-Cable 6602 can be divided into several groups. They are, among others:
- Porter-Cable technical drawings
- 6602 manuals
- Porter-Cable product data sheets
- information booklets
- or energy labels Porter-Cable 6602
All of them are important, but the most important information from the point of view of use of the device are in the user manual Porter-Cable 6602.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Porter-Cable 6602, service manual, brief instructions and user manuals Porter-Cable 6602. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Porter-Cable 6602.

Similar manuals

A complete manual for the device Porter-Cable 6602, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Porter-Cable 6602 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Porter-Cable 6602.

A complete Porter-Cable manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Porter-Cable 6602 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Porter-Cable 6602, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Porter-Cable 6602, that we can find in the current document
3. Tips how to use the basic functions of the device Porter-Cable 6602 - which should help us in our first steps of using Porter-Cable 6602
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Porter-Cable 6602
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Porter-Cable 6602 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Porter-Cable 6602?

Use the form below

If you did not solve your problem by using a manual Porter-Cable 6602, ask a question using the form below. If a user had a similar problem with Porter-Cable 6602 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)