Manual Intel 945GC

39 pages 0.67 mb
Download

Go to site of 39

Summary
  • Intel 945GC - page 1

    Document Number: 307504-004 Intel ® 945G/945GZ/945GC/ 945P/945PL Express Chipset Family Thermal and Mechanical De sign Guidelines (TMDG) - For the Intel ® 82945G/82945GZ/82945GC Graphics Memory Controller Hub (GMCH) and Intel ® 82945P/82945PL Memory Controller Hub (MCH) February 2008 ...

  • Intel 945GC - page 2

    2 Thermal and Mechanical Design Guidelines INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNE CTION WITH INTEL® PRODUCTS . NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIAB ...

  • Intel 945GC - page 3

    Thermal and Mechanical Design Guidelines 3 Contents 1 Introduc tion ..................................................................................................... 7 1.1 Terminology .......................................................................................... 8 1.2 Reference Do cuments ............................................ ...

  • Intel 945GC - page 4

    4 Thermal and Mechanical Design Guidelines Figures Figure 1. (G)MCH Non-Grid Array ...................................................................... 12 Figure 2. 0° Angle Attach Method ology (top view, not to scale).............................. 16 Figure 3. 0° Angle Attach Heatsink Modifi cations (generic heatsink side and bottom view shown ...

  • Intel 945GC - page 5

    Thermal and Mechanical Design Guidelines 5 Revision History Revision Number Description Date -001 • Initial Rel ease May 2005 -002 • Added Intel ® 82945PL specific ations October 2005 -003 • Added Intel ® 82945GZ specificati ons December 2005 -004 • Added Intel ® 82945GC specific ations F ebruary 2008 § ...

  • Intel 945GC - page 6

    6 Thermal and Mechanical Design Guidelines ...

  • Intel 945GC - page 7

    Introduction Thermal and Mechanical Design Guidelines 7 1 Introduction As the complexity of computer systems increases, so do power dissi pati on requirements. The additional power of next generati on systems must be properly dissipated. Heat can be dissi pated using improved system cooli ng, selective use of ducting, and/or active/passive heatsink ...

  • Intel 945GC - page 8

    Introduction 8 Thermal and Mechanical Design Guidelines 1.1 Terminology Term Description BGA Ball Grid Array. A package type defined by a resin-fiber substrate where a die is mounted and bonded. The primary electrical interface is an array of solder balls attached to the substrate opposite the die and molding compound. FC-BGA Flip Chip Ball Grid Ar ...

  • Intel 945GC - page 9

    Introduction Thermal and Mechanical Design Guidelines 9 1.2 Reference Documents Document Comments Intel ® 945G/945GZ/945P/945PL Express Chi pset Family Datasheet http://developer.intel.com/des ign/chipset s/datashts/307502. htm Intel ® I/O Controller Hub 7 (ICH7) Datasheet http://developer.intel.com//de sign/chipsets/datashts/30701 3.htm Intel ® ...

  • Intel 945GC - page 10

    Introduction 10 Thermal and Mechanical Design Guidelines ...

  • Intel 945GC - page 11

    Product Specifications Thermal and Mechanical Design Guidelines 11 2 Product Specifications This ch apter p rovide s the pa ckage d escrip tion and loading specific ations. T he chap ter also provid es compon ent therma l specificat ions and th ermal desig n power de scriptions for the (G)MCH. 2.1 Package Description The (G) MCH is availab le in a ...

  • Intel 945GC - page 12

    Product Specifications 12 Thermal and Mechanical Design Guidelines Figure 1. (G)MCH Non-Grid Array 2.2 Package Loading Specifications Table 1 provides static lo ad spec ifications fo r the chip set pa ckage. T his mechan ical maximum load limit sh ould not be e xceeded during heat sink assembly, s hipping conditions, or standard use conditions. Als ...

  • Intel 945GC - page 13

    Product Specifications Thermal and Mechanical Design Guidelines 13 2.3 Thermal Specifications To ensur e proper operation a nd reliabilit y of the (G) MCH, the temp erature mu st be at or below th e maximum value sp ecified in Table 2. System and component level thermal enhancements are required to dissipate the heat generated and mai ntain the (G) ...

  • Intel 945GC - page 14

    Product Specifications 14 Thermal and Mechanical Design Guidelines 2.4.1 Methodology 2.4.1.1 Pre-Silicon To dete rmine TDP for pre-silic on produ cts in deve lopment, it is necessa ry to make estimates b ased on a nalytical models. T hese mode ls rely on exte nsive knowledg e of the past chipset power dissipation behavi or al ong with knowledge of ...

  • Intel 945GC - page 15

    Thermal Metrology Thermal and Mechanical Design Guidelines 15 3 Thermal Metrology The system designer must measure temperatures to accurately determine the thermal performance of the system. Intel has established gui del ines for proper techniques of measuring (G)MCH component case temperatures. 3.1 Case Temperature Measurements To ensu re function ...

  • Intel 945GC - page 16

    Thermal Metrology 16 Thermal and Mechanical Design Guidelines Figure 2. 0° Angle Attach Methodology (top view, not to scale) Figure 3. 0° Angle Attach Heatsink Modifi cations (generic heatsink side and bottom view shown, not to scale) 3.2 Airflow Characterization Figure 4 describes the recommended location for ai r temperature measurements measur ...

  • Intel 945GC - page 17

    Thermal Metrology Thermal and Mechanical Design Guidelines 17 Figure 4. Airflow Temperature Measurement Locations Airflow velocity should be me asured u sing industry standard air velocity sensors. Typical airflow sensor technol ogy may include hot wire anemometers. Figure 4 provide s guidance for airflow velo city measure ment locat ions. These lo ...

  • Intel 945GC - page 18

    Thermal Metrology 18 Thermal and Mechanical Design Guidelines ...

  • Intel 945GC - page 19

    Reference Thermal Solution Thermal and Mechanical Design Guidelines 19 4 Reference Thermal Solution The reference component thermal solution fo r the (G)MCH for ATX platforms uses two ramp retainers, a wire preload cli p, and four custom MB anchors. The Intel Balanced Technology Extended (BTX) reference design uses a Z-clip attach for the (G)MCH he ...

  • Intel 945GC - page 20

    Reference Thermal Solution 20 Thermal and Mechanical Design Guidelines Figure 5. Processor Heatsink Orientation to Provide Airflow to (G)MCH Heatsink on an ATX Platform Proc _HS_Orient_ATX Airflow Direction Airflow Di rection Airflow Direction Airflo w Direc tion Airflow Di recti o n Airfl ow D irecti on Airflow Di recti o n Airfl ow Di rectio n (G ...

  • Intel 945GC - page 21

    Reference Thermal Solution Thermal and Mechanical Design Guidelines 21 Figure 6. Processor Heatsink Orientation to Provide Airflow to (G)MCH Heatsink on a Balanced Technology Extended (BTX) Platform Top Vi ew Balanced Tec hnol ogy Extende d (BTX ) Th ermal Mo d ule As s e mbly Ov er Process or (G)MCH Airf low D irection Proc _HS_O ri ent 4.2 Mechan ...

  • Intel 945GC - page 22

    Reference Thermal Solution 22 Thermal and Mechanical Design Guidelines Figure 7. ATX GMCH Heatsink Installed on Board ...

  • Intel 945GC - page 23

    Reference Thermal Solution Thermal and Mechanical Design Guidelines 23 Figure 8. Balanced Technology Extended (BTX) GMCH Heatsink Installed on Board ...

  • Intel 945GC - page 24

    Reference Thermal Solution 24 Thermal and Mechanical Design Guidelines 4.4 Environmental Reliability Requirements The envir onmental r eliability re quiremen ts for the referenc e thermal s olution are shown in Table 4. These s hould be conside red as genera l guidelin es. Validat ion test plans should be defined by the user based on antici pated u ...

  • Intel 945GC - page 25

    Enabled Suppliers Thermal and Mechanical Design Guidelines 25 Appendix A Enabled Suppliers Current suppliers for the Intel ® 945G/945GZ/945GC/945P/945PL Express chipset (G)MCH re ference thermal solu tion are list ed in Table 5 and Table 6. Table 5. (G)MCH ATX Intel Reference Heatsink Enabled Suppliers Supplier Intel Part Number Vendor Part Number ...

  • Intel 945GC - page 26

    Enabled Suppliers 26 Thermal and Mechanical Design Guidelines Table 6. (G)MCH Balanced Technology Extended (BTX) Intel Reference Heatsink Enabled Suppliers Supplier Intel Part Number Vendor Part Number Contact Information CCI (Chaun Choung Technology Corp.) C57359-001 00C863401A Monica Chih - +886 ( -2) - 29952666 monica_chih@ccic.com.tw Harry Lin ...

  • Intel 945GC - page 27

    Mechanical Drawings Thermal and Mechanical Design Guidelines 27 Appendix B Mechanical Drawings The following table list s the mec hanical dra wings availab le in this do cument. Drawing Name Page Number (G)MCH Package Drawing 28 (G)MCH Component Keep-Out Restrictions for ATX Platforms 29 (G)MCH Component Keep-Out Restrictions for Balanced Technolog ...

  • Intel 945GC - page 28

    Mechanical Drawings s 28 Thermal and Mechanical Design Guidelines Figure 9. (G)MCH Package Drawing ...

  • Intel 945GC - page 29

    Mechanical Drawings Thermal and Mechanical Design Guidelines 29 Figure 10. (G)MCH Component Keep-Out Restrictions for ATX Platf orms 8X PLATED THR U H O LE 8X 1.42[.056] T RA CE K E E P OUT 0.97 .038 [] 4 .1575 [] 74 2.9134 [] 47 1.85 [] 60.92 2.398 [] 4X 8 . 7 6 .345 [] 4X 8.76 .345 [] 4X 1.84 .072 [] 4X 5.08 .200 [] 81 3.189 [] 60.6 2.386 [] 26.7 ...

  • Intel 945GC - page 30

    Mechanical Drawings s 30 Thermal and Mechanical Design Guidelines Figure 11. (G)MCH Component Keep-Out Restrictions for Balanced Technology Extended (BTX) Platforms 4X 8. 76 .3 4 5 [] 4X 4. 19 .1 6 5 [] 4X 1. 85 . 073 [] 4X 5. 08 .2 0 0 [] 4X 2. 1 . 08 3 [] 8X P L A T E D T HRU HO L E 0. 97 . 038 [] 48. 26 1. 900 [] 55. 8 8 2. 2 0 0 [] 2X 3. 3 .1 3 ...

  • Intel 945GC - page 31

    Mechanical Drawings Thermal and Mechanical Design Guidelines 31 Figure 12. (G)MCH Reference Heatsink for ATX Platf orms – Sheet 1 2 X 58. 6 2.307 [] 2X 80 3. 150 [] 47 1.850 [] 36 1.417 [] 8X 2 . 7 0. 15 .1 0 6 .005 [] 7X E Q U A L SP A CING T YP 6 3. 7 5 0.15 .148 .00 5 [] T YP 3 5 .5 1.398 [] 2X 6 48 0.15 1.890 . 005 [] 2X 6 59. 28 0. 15 2.334 ...

  • Intel 945GC - page 32

    Mechanical Drawings s 32 Thermal and Mechanical Design Guidelines Figure 13. (G)MCH Reference Heatsink for ATX Platf orms – Sheet 2 2X 6 0.6 .0 2 4 [] TYP 6 2.75 0. 1 .108 . 003 [] 6 1. 5 0. 15 . 059 .00 5 [] 6 6. 72 0.15 . 265 .005 [] R0 . 5 .02 0 [] 2X 15 .59 1 [] 16 .63 0 [] 25. 5 1. 004 [] 66 2. 5984 [] TYP 4 .1575 [] TY P 135 TYP R 1 .03 9 [ ...

  • Intel 945GC - page 33

    Mechanical Drawings Thermal and Mechanical Design Guidelines 33 Figure 14. (G)MCH Reference Heatsink for ATX Platf orms – A nchor 6 5. 21 0. 12 .20 5 . 004 [] 4X 6 7. 83 0.12 .30 8 . 004 [] 2X 10. 13 0. 12 .3 9 9 .004 [] 2X 6 0.77 0.1 .03 0 . 003 [] 7. 62 0. 15 .3 00 .005 [] 2.5 0.15 .098 .00 5 [] 0. 64 0 -0.07 .0 25 +. 0 0 0 -.002 [] 6 5.08 0.12 ...

  • Intel 945GC - page 34

    Mechanical Drawings s 34 Thermal and Mechanical Design Guidelines Figure 15. (G)MCH Reference Heatsink for ATX Platf orms – R amp Retainer Sheet 1 2X 31.1 1.225 [] 6 2 0.05 .0 7 9 .0 01 [] 6 61. 51 2.422 [] 6 70.49 2. 775 [] 2X 27.95 1.1 00 [] 3 .11 8 [] NOT ES: 1. T HIS DRA W ING T O BE U S E D IN CO NJUNCT IO N W IT H SUP P LIED 3D DATABASE FIL ...

  • Intel 945GC - page 35

    Mechanical Drawings Thermal and Mechanical Design Guidelines 35 Figure 16. (G)MCH Reference Heatsink for ATX Platf orms – R amp Retainer Sheet 2 B B 6 1. 75 .06 9 [] 2.7 5 .108 [] 6 0.5 .02 0 [] 4 .15 7 [] 6 5. 56 . 219 [] 2X 6 2.9 . 114 [] 6.4 . 252 [] 6 3. 15 . 124 [] 6 4. 7 5 . 187 [] 3 .118 [] 5.2 . 205 [] 1. 19 . 047 [] 6.5 5 .25 8 [] 2X 6 5 ...

  • Intel 945GC - page 36

    Mechanical Drawings s 36 Thermal and Mechanical Design Guidelines Figure 17. (G)MCH Reference Heatsink fo r ATX Platforms – Wire Preload Clip A A A A 46. 6 0. 5 1. 8 3 5 .0 19 [] 2X 90 TYP R 1 . 8 .07 1 [] 19.3 0. 5 .76 0 .0 19 [] 27.3 0. 5 1.075 .01 9 [] 4 27. 7 1. 090 [] 61.74 0. 5 2. 431 .019 [] 37.06 1.459 [] 2. 65 . 104 [] NOT ES: 1 . T HI S ...

  • Intel 945GC - page 37

    Mechanical Drawings Thermal and Mechanical Design Guidelines 37 Figure 18. (G)MCH Reference Heatsink for Bala nced Technology Extended (BTX) Platforms A 24.2 .953 [] 47.8 8 1.885 [] 15 X EQ U AL SPAC ES () 1.94 .08 [] 2X 1.17 .046 [] 3.4 0. 2 .134 .007 [] () 15 .59 1 [] 19 .748 [] 19 .74 8 [] 2X 1.2 .04 7 [] 2X 7.25 0.2 .28 5 .0 07 [] 3 0.2 .118 .0 ...

  • Intel 945GC - page 38

    Mechanical Drawings s 38 Thermal and Mechanical Design Guidelines Figure 19. (G)MCH Reference Heatsink for Balanced Technology Extended (BTX) Platforms – Clip A A A A B B 2X 90 27. 3 1. 075 [] 47. 36 1. 865 [] R TYP 1. 3 . 051 [] 8. 87 1. 25 .3 4 9 .0 4 9 [] 4 X R 1 .8 .0 7 1 [] 3. 8 . 150 [] 62. 6 1 2. 465 . 039 [] 25. 14 . 990 [] W IR E T E R M ...

  • Intel 945GC - page 39

    Mechanical Drawings Thermal and Mechanical Design Guidelines 39 Figure 20. (G)MCH Reference Heatsink for Balanced Tec hnology Extended (BTX) Platforms – Heatsink Assembly () 55.88 2.200 [] C () 33 1.299 [] B () 19 .748 [] () 19 .748 [] N O TES: 1 . THIS DRAWIN G TO BE USE D IN C O NJ UN CT IO N WITH SUP P L IED 3 D DATABASE F I L E. AL L D IMENS ...

Manufacturer Intel Category Chipper

Documents that we receive from a manufacturer of a Intel 945GC can be divided into several groups. They are, among others:
- Intel technical drawings
- 945GC manuals
- Intel product data sheets
- information booklets
- or energy labels Intel 945GC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intel 945GC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intel 945GC, service manual, brief instructions and user manuals Intel 945GC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intel 945GC.

Similar manuals

A complete manual for the device Intel 945GC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intel 945GC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intel 945GC.

A complete Intel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intel 945GC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intel 945GC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intel 945GC, that we can find in the current document
3. Tips how to use the basic functions of the device Intel 945GC - which should help us in our first steps of using Intel 945GC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intel 945GC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intel 945GC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intel 945GC?

Use the form below

If you did not solve your problem by using a manual Intel 945GC, ask a question using the form below. If a user had a similar problem with Intel 945GC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)