Manual Cisco Systems WSC4500X24XIPB

194 pages 7.47 mb
Download

Go to site of 194

Summary
  • Cisco Systems WSC4500X24XIPB - page 1

    Corporate Headquarters Cisco S yste ms, Inc . 170 W est Tasma n Drive San Jose , CA 95134 -1706 USA http://ww w.cisco. com Tel: 408 526-400 0 800 55 3-N ETS ( 6387 ) Fax: 408 526- 4100 Catalyst 450 0 Series S witc hes Installation Gui de December 20 05 Custome r Order N umber: D OC-78 14409= Text Pa rt Num ber: 78 -14409 -08 ...

  • Cisco Systems WSC4500X24XIPB - page 2

    THE SPECIFICA TIONS AND INFORMA TIO N REGARDING THE PR ODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTI CE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMENDA TIONS IN THIS MANUAL ARE B ELIEVED TO BE ACCURA TE BUT ARE PRESENTED WITHOUT W ARRANTY OF ANY KIND, EXPRESS OR IMP LIED. USERS MUST T AKE FULL RESPONSIBILIT Y FOR THEIR APPLICA TION OF AN ...

  • Cisco Systems WSC4500X24XIPB - page 3

    Catalyst 45 00 Series Switches Instal lation Guide Copyright © 200 2 – 2005 Cisc o Systems, Inc. All rights res erved. CCSP , CCVP , the Cisco Square Bridge logo, Follow Me Bro wsing, and StackW ise are trademarks of Cisco Systems, Inc.; Changing the W ay W e W ork, Liv e, Play , and Learn, and iQuick Study are service marks of Cisco Systems, In ...

  • Cisco Systems WSC4500X24XIPB - page 4

    ...

  • Cisco Systems WSC4500X24XIPB - page 5

    v Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 CONTENTS Preface ix Audienc e ix Organi zati on ix Relat ed Do cume nta tion x Convent ions xi Obtain ing Docu ment ation xvii Cisco. com xv ii Produc t Documen tation DVD xviii Orderi ng Docume ntation xviii Document ation Feedba ck xix Cisco Pr oduct Securi ty Overvi ew xix Report ...

  • Cisco Systems WSC4500X24XIPB - page 6

    Contents vi Catalyst 4500 Series Switches Installation Guide 78-14409-08 Supervi sor En gines 1-18 LEDs 1-24 Gigabi t Ethe rnet Upli nk Port s 1-25 10-G igabi t Ethe rnet Upli nk P orts 1-25 SFP Port s 1-26 10/100B ASE-T Po rt 1-26 CONSOLE P ort 1-26 RESET B utton 1-26 CompactF lash Po rt 1-27 Fan Assembl y 1-27 Power S uppli es 1-31 Powe r Suppl y ...

  • Cisco Systems WSC4500X24XIPB - page 7

    vii Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Conte nts Ventil ati on 2-14 Calcul atin g Sys tem He at Di ssipat ion 2-15 Site- Plann ing Che cklist 2-16 CHAPTER 3 Instal ling th e Switch in a Rack 3-1 Checki ng the Shi pping Con tain er Content s 3-2 Rack-Mou nting the Swit ch 3-3 Requir ed Inst allat ion Too ls 3-3 Rack-Mou ...

  • Cisco Systems WSC4500X24XIPB - page 8

    Contents viii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Replac ing Bac kplan e Modules on a Catalys t 4507R or 4510R Switch 4-24 Verif y the New Modul es 4-30 CHAPTER 5 Troubles hootin g 5-1 System Boo t Veri ficati on 5-2 Proble m Solvi ng to the Sys tem Compon ent Lev el 5-3 Using LEDs to Ident ify S tartu p Prob lems 5-4 Troub ...

  • Cisco Systems WSC4500X24XIPB - page 9

    ix Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface This pr efac e descri bes th e audi ence, o rganizat ion, a nd conve ntion s of th e Catalyst 4 500 Seri es Switche s Install ation Gui de a nd prov ides inform ation on how to obtain r elated d ocumentatio n and te chnical assistan ce. Audience Only train ed and quali fied s ...

  • Cisco Systems WSC4500X24XIPB - page 10

    Preface Related Documentation x Catalyst 4500 Series Switches Installation Guide 78-14409-08 Related Documentation Refer to the following docu ments for additional Catal yst 4500 series information: • Catalyst 4500 Series Module Installation Guide at http://www .cisco.com/en/US/p roducts/hw/sw itches/ps4324/prod ucts_modul e_instal latio n_guide_ ...

  • Cisco Systems WSC4500X24XIPB - page 11

    xi Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns • The syste m message guid e appropr iate to your soft ware version. Syste m message g uides are at: http://www .cisco.com/en/US/p roducts/hw/switch es/ps4324/prod ucts_system _message _guides_li st.html • There are a number of in stallation not es and tech ...

  • Cisco Systems WSC4500X24XIPB - page 12

    Preface Conve ntions xii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Notes use the follo wing con ventions: Note Means r eader ta ke no te . No tes cont ain h elpf ul s ugges ti ons or r efer ence s to mater ial not covered in th e publica tion. Cautions use the following conv ention s: Cautio n Means re a d e r b e c a re f u l . ...

  • Cisco Systems WSC4500X24XIPB - page 13

    xiii Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns W arn ings use the following conv entions: War ni ng IMPORT ANT SAFET Y INSTRUCT IONS This warning symbol means danger . Y ou ar e in a situation that could cause bodily injury . Before you work on any equipmen t, be aware of the hazards involved with electri ...

  • Cisco Systems WSC4500X24XIPB - page 14

    Preface Conve ntions xiv Catalyst 4500 Series Switches Installation Guide 78-14409-08 Attention IMPORTANTES IN FORMA TIONS DE SÉCU RITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant entraîner des blessu res ou des dommages corporels. A vant de travailler sur un équipement, soyez conscient des ...

  • Cisco Systems WSC4500X24XIPB - page 15

    xv Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns Adva rsel VIKTIGE S IKKERHE TSINSTRUKS JONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide m ed noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser , og ...

  • Cisco Systems WSC4500X24XIPB - page 16

    Preface Conve ntions xvi Catalyst 4500 Series Switches Installation Guide 78-14409-08 Va r ni n g ! VIKTIGA SÄ KERHETS ANVISN INGA R Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanlig ...

  • Cisco Systems WSC4500X24XIPB - page 17

    xvii Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obt ain ing Do cume ntat io n Obtaining Documentation Cisco docum entati on and additi onal litera ture are av ailable on Cisc o.com. Cisco also prov ides se veral w ays to obtain technical assista nce and other technical resources. T hese sectio ns exp lain ho w to obtain ...

  • Cisco Systems WSC4500X24XIPB - page 18

    Preface Obtaining Documentation xviii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Product Docu mentation DVD Cisco docum entation a nd ad ditional l iterature are a v ai lable in the Pr oduct Docume ntation DVD package, whi ch may have shippe d with your pro duct. The Product Docume ntation DVD is updat ed regular ly and ma y be mo ...

  • Cisco Systems WSC4500X24XIPB - page 19

    xix Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Docume ntation Feedba ck Documentatio n Feedback Y o u can rate an d provide feed back about Cisco tec hnical doc ument s by completing the online feedbac k form that appear s with the technical docu ments on Cisco.com . Y o u can send com ments ab out Cisco document ation t ...

  • Cisco Systems WSC4500X24XIPB - page 20

    Preface Obtainin g Techn ical Assist ance xx Catalyst 4500 Series Switches Installation Guide 78-14409-08 Reporting Se curity Problems in Cisco Produ cts Cisco is committed to deli v ering secure products. W e test our pr oducts internally before we rele ase them, and we stri v e to correct all vulne rabilities q uickly . If you think tha t you mig ...

  • Cisco Systems WSC4500X24XIPB - page 21

    xxi Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obtaini ng T echnical Assi stance servic e contra ct, C isco T ech nica l Assist ance Center (T AC) engineer s provide telepho ne support . If you do not hav e a valid Cisco ser vice contra ct, co ntact you r reseller . Cisco Tec hnical Support & Do cumentatio n Website ...

  • Cisco Systems WSC4500X24XIPB - page 22

    Preface Obtainin g Techn ical Assist ance xxi i Catalyst 4500 Series Switches Installation Guide 78-14409-08 solution s. If your i ssue is not resol ved using the re commen ded res ources, yo ur service req uest is a ssigned to a Cis co en gine er . The T AC Servic e Re quest T ool i s located at thi s URL: http://www .cisco.com/tec hsupport/ser vi ...

  • Cisco Systems WSC4500X24XIPB - page 23

    xxii i Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obtaini ng Additiona l Publicati ons and Informa tion Obtaining Ad ditional Public ations and In formation Informa tion abo ut Cisco produ cts, tech nologies, and ne twork solu tions is av ailable fro m va ri ous onlin e and printe d sour ces. • Cisco Market place provi ...

  • Cisco Systems WSC4500X24XIPB - page 24

    Preface Obtaining Additional Publications and Information xxiv Catalyst 4500 Series Switches Installation Guide 78-14409-08 • Internet Pr otocol Journal i s a qua rterly j ournal pub lished by Cisco Syst ems for eng ineerin g profe ssionals inv olved in de signing, deve loping, and operatin g pu blic a nd pr i v ate i ntern ets an d intr anets. Y ...

  • Cisco Systems WSC4500X24XIPB - page 25

    C HAPTER 1-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 1 Product Overview This ch apter pr o vides an ov er vie w of the feat ures an d compo nents of the Catalyst 4500 serie s switc hes. Th e Catalyst 4500 se ries swi tches a re the Catalyst 4503 switc h, the Ca talyst 45 06 switch, the C atalyst 4507R switch , and the Cataly ...

  • Cisco Systems WSC4500X24XIPB - page 26

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalys t 4503 Switch Fe atures The Ca talyst 4503 swit ch (see Figure 1-1 ) is a three- slot switch desi gned for high-pe rforma nce, hi gh-den sity w iring c loset appli cations. Figur e 1 -1 Catalyst 45 03 S witc h (F r ont V iew) The ...

  • Cisco Systems WSC4500X24XIPB - page 27

    1-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Slot 1 is reserved for the super visor en gine on ly , whic h provides switching , local and rem ot e mana geme nt , and sw itc h-st atus mon itori ng . Slot s 2 and 3 are a v a ilab le for swit ching mo dules. Ta b l e 1 - 1 descri bes t ...

  • Cisco Systems WSC4500X24XIPB - page 28

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Switching modul e support • 24-port 10/100 B ASE-TX Fast Et hernet swi tching module (WS-X412 4-RJ45) • 24-port 100BASE-FX Fast Etherne t switch ing mo dule (WS-X412 4-FX-MT) • 48-port 100BASE-FX Fast Etherne t switch ing mo dule ( ...

  • Cisco Systems WSC4500X24XIPB - page 29

    1-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 2-port Gigabit Ethern et switc hing m odule ( WS-X4302 -GB) • 6-port 1000B ASE-X Gigabit Ethe rnet swi tching m odule (W S-X4306-GB ) • 6-port Gigabit Ethern et sw itching m odule ( WS-X4506 ...

  • Cisco Systems WSC4500X24XIPB - page 30

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalys t 4506 Switch Fe atures The Ca talyst 4506 swit ch (see Figure 1-2 ) is a six- slot swit ch designed for high-pe rforma nce, hi gh-den sity w iring c loset appli cations. Figur e 1 -2 Catalyst 45 06 S witc h (F r ont V iew) The C ...

  • Cisco Systems WSC4500X24XIPB - page 31

    1-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features for Gi gabit E therne t conn ections, or X2 module s for 10-Gi gabit Ethern et connec tions. Refe r to the inst allatio n note for your superviso r engine for more details on t hese mo dules. Slot 1 is reserved for the super visor en gine ...

  • Cisco Systems WSC4500X24XIPB - page 32

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports th e Supervis or Engine II, II+, II+10 GE, III, IV , V • Holds the ASIC- based forwar ding en gine (data path ) and the manageme nt proc essor a nd software ( contro l path) • Features in ter ...

  • Cisco Systems WSC4500X24XIPB - page 33

    1-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 32-port 10/100- Mbps Fast Et hernet p lus 2 -port Gi gabit Eth ernet switching mo dule (WS-X4 232-GB-RJ ) • 32-port 10/100-Mb ps Fast Et hernet p lus 2-po rt 1000 B ASE-X L ayer 3 Gigabit E the ...

  • Cisco Systems WSC4500X24XIPB - page 34

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 45 07R Switch F eatures The Catal yst 4507R switch (se e Figure 1-3 ) is a se ven-slot switch designe d for high-pe rforma nce, hi gh-den sity w iring c loset appli cations. Figur e 1 -3 Catalyst 45 07R S witc h (F r ont V iew) ...

  • Cisco Systems WSC4500X24XIPB - page 35

    1-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Series Superv isor Engine s and Switching Modules Insta llation Note . Some supervisor engines use SFP modules for Gigabit Ethe rnet connections, or X2 modules for 10-Gi gabit Ether net connectio ns. Refer to the installa tion note for y ...

  • Cisco Systems WSC4500X24XIPB - page 36

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports the Sup ervisor Engine II, I I+, II+10 GE, II I, IV , V , V - 10GE • Hold s the ASIC-b ase d forw ar ding engi ne (da ta pat h) and t he ma nage ment proc ess or and s oftw are (co ntro l pat ...

  • Cisco Systems WSC4500X24XIPB - page 37

    1-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 24-port IEEE 802 .3af-co mpliant Po E 10/1 00B ASE-T X switchin g mod ule (WS-X4224 -RJ45V) • 48-port IEEE 802.3af c ompliant Po E 10/100BASE-TX RJ-45 swi tching module (W S-X42 48-RJ45V) • ...

  • Cisco Systems WSC4500X24XIPB - page 38

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 45 10R Switch F eatures The Catal yst 4510R switch (se e Figure 1-4 ) is a ten-slot switch desi gned for high-pe rforma nce, hi gh-den sity w iring c loset appli cations. Figur e 1 -4 Catalyst 45 1 0R Switc h (Fr ont View) The ...

  • Cisco Systems WSC4500X24XIPB - page 39

    1-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Ins tal lati on Gu id e or th e Catalyst 4500 Se ries Supervi sor Engines a nd Switching Modules Installation Note . S ome su per vi sor en gine s us e SFP modu le s for G ig abit Ether net co nnectio ns, or X 2 modu les for 1 0 Giga bit ...

  • Cisco Systems WSC4500X24XIPB - page 40

    Chapter 1 Product Ove rview Swit ch F eat ure s 1-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports t he Supervis or Engine V and V -1 0GE • Hold s the ASIC-b ase d forw ar ding engi ne (da ta pat h) and t he ma nage ment proc ess or and s oftw are (co ntro l pat h) • Features i nterface m ...

  • Cisco Systems WSC4500X24XIPB - page 41

    1-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 32-port 10/100- Mbps Fast Et hernet s witchi ng modul e with m odular uplink support (WS- X4232-RJ -XX) – 4-port MT -RJ uplink mo dule (WS-U 4504-FX -MT) (opti onal) • 2-port Gigabit E thern ...

  • Cisco Systems WSC4500X24XIPB - page 42

    Chapter 1 Product Ove rview Supervisor Engines 1-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Supervisor Engines The fol lo wing s upe rvisor en gine s are a v aila ble for th e Catal yst 4500 series switch es: • Supervi sor Engine II (WS- X4013) ( Fi gure 1-5 ) • Supervi sor Engi ne II-Plu s (WS-X40 13+) ( Figure 1-6 ) • S ...

  • Cisco Systems WSC4500X24XIPB - page 43

    1-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Hot- swappable Suppo rted. On non-red undant systems, packets ar e not fo rwarded while the supe rvisor engine is re moved, and a system rebo ot occur s whe n a supe rvisor en gine is re insert ed. Gigabi t Ether net (using a GBIC o ...

  • Cisco Systems WSC4500X24XIPB - page 44

    Chapter 1 Product Ove rview Supervisor Engines 1-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 The Superv isor Engi ne IV and Superv isor Engi ne V support th e Catalyst 450 0 Series NetFlow Services Card ( WS-F4531). The Sup ervisor E ngine V - 10GE supports Ne tFlo w services with out a NetFl ow Ser vices Car d. T o install the ...

  • Cisco Systems WSC4500X24XIPB - page 45

    1-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Figur e 1 -7 Catalyst 45 00 Ser ies Supervisor Engine II-Plus TS (WS-X40 13+TS) Figur e 1 -8 Supervisor Engine II-Plus 1 0GE (WS-X40 13+1 0GE) 113860 STATUS LED RESET button Switch load indicators CONSOLE port Ethernet management po ...

  • Cisco Systems WSC4500X24XIPB - page 46

    Chapter 1 Product Ove rview Supervisor Engines 1-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 1 -9 Supervisor E ngine III (WS-X40 14) Figur e 1 -1 0 Supervisor E ngine IV (WS- X4515) 68126 STATUS LED RESET button Gigabit uplink ports Switch load indicators CONSOLE port Management port Compact Flash port U PLINK 1 LIN K A ...

  • Cisco Systems WSC4500X24XIPB - page 47

    1-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Figur e 1 -1 1 Supervisor E ngine V (WS-X4516 ) Figur e 1 -12 Supervisor E ngine V -1 0GE (WS-X4516-1 0GE) For informat ion about t he connect ors, LEDs, and switches loc ated on the front panel of the s uperv isor en gine, see thes ...

  • Cisco Systems WSC4500X24XIPB - page 48

    Chapter 1 Product Ove rview Supervisor Engines 1-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • CONSO LE Po rt, page 1 -26 • RESET Bu tton, pa ge 1-26 • CompactFl ash Port, page 1-27 LEDs Ta b l e 1 - 6 describes th e supervisor e ngine LEDs. T able 1 -6 Supervisor Engine LEDs LED Color/State Description ST A TUS Indi cates ...

  • Cisco Systems WSC4500X24XIPB - page 49

    1-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Gigabit Etherne t Uplink Ports The Gigabit Eth erne t uplink ports op erate in full -duplex mod e only . GBICs hav e SC connectors to inter face with multimode f iber (MMF) and single-mode f iber (SMF) ca ble. For more inform ation ...

  • Cisco Systems WSC4500X24XIPB - page 50

    Chapter 1 Product Ove rview Supervisor Engines 1-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08 SFP Ports Gigabit Ethernet SFP ports operate in full-duplex mode only and are present on the WS-X 4013+TS, WS-X4516 -10GE and W S-X4013+ 10GE sup ervisor s, as well as some swit ching modul es. The se ports use th e 1000BASE-SX, 1000B AS ...

  • Cisco Systems WSC4500X24XIPB - page 51

    1-27 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Fan Assemb ly Note Us e a paper cli p or other smal l, pointed obj ect to press th e Reset button. CompactFlash Port The C ompac tFlash p ort acce pts a T ype 1 C ompac tFlash card . Y ou ca n use it f or fi le transfer tasks such as loading a new softw ...

  • Cisco Systems WSC4500X24XIPB - page 52

    Chapter 1 Product Ove rview Fan Assem bly 1-28 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 1 -13 Cat aly st 4 503 Airf low Figu re 1 -14 Cat aly st 4 506 Airf low 1 1 3 1 1 3 1 1 3 1 1 3 77981 4 5 0 6 U P L I N K 1 U P L I N K 2 A C T IV E L I N E A C T I V E L IN E A C T IV E R E S E T U T I L I Z A T I O N S T A T U S 450 ...

  • Cisco Systems WSC4500X24XIPB - page 53

    1-29 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Fan Assemb ly Figu re 1 -15 Cat aly st 450 7R A irfl ow 68111 Fan assembly W S -X 4 44 8-G B -R J4 5 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 4 1 4 0 3 9 3 8 3 ...

  • Cisco Systems WSC4500X24XIPB - page 54

    Chapter 1 Product Ove rview Fan Assem bly 1-30 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 1 - 16 Cat aly st 4510R Airf low 94942 W S -X 4 44 8-G B -R J45 S T A TU S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 4 1 4 0 3 9 3 8 3 7 3 6 3 5 3 4 3 3 4 ...

  • Cisco Systems WSC4500X24XIPB - page 55

    1-31 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Power Supplies Note For detailed specif ications o n all Catalyst 45 00 series po wer supplies, refer to the “Cata lyst 4500 Series Po wer Supplies” se ction on pag e A-7 . A Catalyst 45 00 series switc h can use a 1000 W , 130 0 W , ...

  • Cisco Systems WSC4500X24XIPB - page 56

    Chapter 1 Product Ove rview Power Supp lies 1-32 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 1 -18 4200 W Dual Input A C P ow er Supply Note Th e 4200 W AC po wer supply should not be used i n mixed-voltage conf igurations. A ll the in puts in a chassis must be the sa me vo ltage (1 10 or 220 V). Figur e 1 -19 140 0 W DC-In ...

  • Cisco Systems WSC4500X24XIPB - page 57

    1-33 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Figur e 1 -20 1400 W DC T r iple-Input P o w er Supply Note The 1400 W DC triple- input pow er supply is not compatible with other po wer supplies use d on these pro ducts, an d can only be us ed with simila r supplies . In redunda nt mod ...

  • Cisco Systems WSC4500X24XIPB - page 58

    Chapter 1 Product Ove rview Power Supp lies 1-34 Catalyst 4500 Series Switches Installation Guide 78-14409-08 T o replac e a po wer s upply , see the “Removing and Repla cing the Power Supply” section on page 4-2 . Power Sup ply LEDs Ta b l e 1 - 7 describes th e po wer supp ly LEDs. T able 1- 7 Po wer Supply LE Ds LED Color/State Description I ...

  • Cisco Systems WSC4500X24XIPB - page 59

    1-35 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Power Sup ply Fan Each p ower supply ha s a built-in fan. Air ent ers th e front of th e power supp ly (power-input en d) an d exits t hroug h the back. An ai r dam keeps the airf low separa te from th e rest of th e chassis, w hich is c ...

  • Cisco Systems WSC4500X24XIPB - page 60

    Chapter 1 Product Ove rview Power Supp lies 1-36 Catalyst 4500 Series Switches Installation Guide 78-14409-08 For a 1400 W DC po wer supply , the main power switc h has an input range of –40 .5 to –72 V DC, while the –48 V PoE operates over a range of –40 .5 to –56 V D C. The P oE either f ails to start or shuts d o wn if exp osed to gre ...

  • Cisco Systems WSC4500X24XIPB - page 61

    1-37 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies The ma ximu m tot al inp ut cur rent is 42.5A and th e maximu m ambi ent te mperatu re is 55 C . T o de termin e tot al maxi mum in put power to a suppl y , add up the active individual modul e input power rat ings. Ta b l e 1 - 9 provide ...

  • Cisco Systems WSC4500X24XIPB - page 62

    Chapter 1 Product Ove rview Power Supp lies 1-38 Catalyst 4500 Series Switches Installation Guide 78-14409-08 T able 1 -1 1 Minimum Lo ad T able PSU 1 PSU 2 Input 1 Input 2 Input 3 Input 1 Inp ut 2 Inp ut 3 12V Minimum Load 3.3 V Minimum Load Sing le Op eration Mode 1 ON OFF OFF – – – 1.33A 0.6A Mode 2 OFF ON OFF – – – 1.33A 0.6A OFF OF ...

  • Cisco Systems WSC4500X24XIPB - page 63

    1-39 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Dual Redund ant O perat ion M o d e 1 O NO F F O F F O NO F F O F F 2 . 6 6 A 1 . 2 A Mode 2 OFF ON OFF OFF ON OFF 2.66A 1.2A OFF OFF ON OFF OFF ON 2. 66A 1.2A M o d e 3 O NO NO F F O NO NO F F 5 . 3 2 A 1 . 2 A ON OFF ON ON OFF ON 5.32A ...

  • Cisco Systems WSC4500X24XIPB - page 64

    Chapter 1 Product Ove rview System A rchitecture 1-40 Catalyst 4500 Series Switches Installation Guide 78-14409-08 System Architecture This sect ion describe s the intera ction between the v arious system components of Catalyst 450 0 series switches. A Ca talyst 4503 only is sho wn in the examples. Powe r Flow Figure 1-21 shows power ingress and fl ...

  • Cisco Systems WSC4500X24XIPB - page 65

    1-41 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure 2800 W AC, 4200 W AC or 1400 W D C) also provide a – 48 V circ uit (sh o wn as a dashed line) to PoE-en abled switching m odules, w hich is th en a v ail able to th e powered device con nected to the switc hing mo dule. Note The ...

  • Cisco Systems WSC4500X24XIPB - page 66

    Chapter 1 Product Ove rview System A rchitecture 1-42 Catalyst 4500 Series Switches Installation Guide 78-14409-08 PoE Over -subscription W ith the advent of powered devices re quiring as muc h as 15.4 W and the di f feren t combinations of po wer supplie s and chassis port densities, it becomes quite possibl e to over -subscribe t he PoE capac ity ...

  • Cisco Systems WSC4500X24XIPB - page 67

    1-43 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure Although refer ences to “PoE ,” “inl ine-power ,” an d “voice” p ower supplie s and line c ards are synonymous, t here are only t wo versions: C isco pr estandar d and IEEE 80 2.3af co mpliant . Every Cisco C atalyst 45 ...

  • Cisco Systems WSC4500X24XIPB - page 68

    Chapter 1 Product Ove rview System A rchitecture 1-44 Catalyst 4500 Series Switches Installation Guide 78-14409-08 4200 W of redundan t data and PoE ar e requir ed for a Cisco Cat alyst 4500 Se ries chass is in an A C-powered environmen t, Cis co offers an exte rnal AC po wer she lf that hous es two 2500 W A C po wer supplies. When tw o po wer s he ...

  • Cisco Systems WSC4500X24XIPB - page 69

    1-45 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure with a sing le 15A circ uit. Likewise, it is po ssible to d eploy a fully p opulated Ci sco Catalyst 451 0R with two 20A and one 15A circu its rathe r than a single 60A conn ecti on, whi ch of ten re qui res ra ck re wiring. Manage ...

  • Cisco Systems WSC4500X24XIPB - page 70

    Chapter 1 Product Ove rview System A rchitecture 1-46 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • Cisco Gr oup Man agement Pro tocol sup port sta ndards-base d and C isco techn ology-en hanced e f ficient mult imedia ne tworking. • Simp le Ne two rk Ma na geme nt Pr otoco l (SN MP) . • CiscoW orks , which can mana ge critic ...

  • Cisco Systems WSC4500X24XIPB - page 71

    1-47 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure Figur e 1 -23 S witchi ng T raf fic F lo w Frames flo w into the switc h through interf aces on the switching module s. Each switch ing mod ule connec ts to a mux/ b uf fer on the backplan e that supp orts a connec tion of u p to 6 ...

  • Cisco Systems WSC4500X24XIPB - page 72

    Chapter 1 Product Ove rview System A rchitecture 1-48 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Etherne t link to the inter nal switch f abric. I f the amount of d ata recei v ed fo r a port begins to exceed buffer capacity , flow control sends pause frames to the rem ote port to temporaril y stop traf f ic and pre v ent frame lo ...

  • Cisco Systems WSC4500X24XIPB - page 73

    C HAPTER 2-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 2 Preparing for Installation War ni ng This unit is intended for installat ion in restricted access area s. A restricted access area can be accessed only thro ugh t he use of a special tool, lock and key , or other m eans of security . Statement 1017 War ni ng Only trained ...

  • Cisco Systems WSC4500X24XIPB - page 74

    Chapter 2 Preparing for Installation Electro static Disch arge 2-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 If you will be using your switch as a PoE source, the follo w ing warning applie s: War ni ng V oltages that present a shock hazard can exist on inline power circuits if interconnections are made by using uninsulated expos ...

  • Cisco Systems WSC4500X24XIPB - page 75

    2-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Electrostatic Discharge Sometime s, voltage is discharged to some of the pins of the connec tor and not others, o r to so me pin s on t he con nector b efore others. This is known as a differentia l discha rge ev ent, w hich can damag e the ne ...

  • Cisco Systems WSC4500X24XIPB - page 76

    Chapter 2 Preparing for Installation Site Power Req uirements and H eat Dissipati on 2-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • When r emo ving a com ponent, use an y a v ail able ejector le ve rs or cap ti v e installati on scre ws t o relea se the b u s connec tors fr om the bac kplane o r midplane . • Handle car riers ...

  • Cisco Systems WSC4500X24XIPB - page 77

    2-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Power Connection Gu idelines for AC-Powered Systems This section prov ides guidelines for connecting the Catalyst 450 0 series switch A C power suppli es to the site po wer sour ce. B ...

  • Cisco Systems WSC4500X24XIPB - page 78

    Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • 1400 W— Ta b l e 2 - 1 lists the AC-i nput po wer co rd options, specif icatio ns, and Cisco product num bers, and shows the different styles of 1400 W A C-input power cord wall pl ugs th ...

  • Cisco Systems WSC4500X24XIPB - page 79

    2-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Italy CAB-7K A CI= 8 f t (2.5 m) 250 V AC, 16 A 1/3/16 CEI 23-16 United Kingdom CAB-7KACU= 8 ft (2.5 m) 250 V A C, 13 A BS 8 9/13 BS 1363/A Argentina CAB-7K A CR= 8 ft (2 .5 m) 250 V ...

  • Cisco Systems WSC4500X24XIPB - page 80

    Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Italy CAB-751 3ACI= 14 ft (4.3 m ) 250 V AC, 16 A 1/3/ 16, CEI 23-16 United Kingdom CAB-751 3A CU= 14 ft (4.3 m) 250 V AC, 13 A BS 89/13 BS 1363/A Argentina CAB-751 3A CR= 14 ft ( 4.3 m) 250 V ...

  • Cisco Systems WSC4500X24XIPB - page 81

    2-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Inte rnational CAB- A C-2800W -I NT= 14 ft (4.3 m ) 250 V AC, 16 A IEC 3 09 2800 W Power Supply (PWR- C45-2800ACV= ) Applia nce C ouple r North Amer ica (locki ng) 200–240 V A C ope ...

  • Cisco Systems WSC4500X24XIPB - page 82

    Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 4200 W Power Supply (P WR-C45-4200ACV= ) Applia nce C ouple r North Americ a 120 V A C operati on CAB-US 515P-C19-U S 6 f t (1.8 2 m) 125V A C, 15A N EMA 5- 15P North Amer ica (locki ng) 200? ...

  • Cisco Systems WSC4500X24XIPB - page 83

    2-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Australi a CAB-AS 3112-C19- A US 6 ft (1 .82 m ) 250 V AC, 15 A AS/NZZS 3112 Italy CAB- CEI2316- C19-IT 6 ft (1.8 2 m) 250 V AC, 16 A CEI 2 3-16 United Kingdom CAB-BS13 63-C19-UK 6 f ...

  • Cisco Systems WSC4500X24XIPB - page 84

    Chapter 2 Preparing for Installation Power Conn ection Gu idelines for D C-Powered Sy stems 2-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Power Connection Gu idelines for DC-Powered Systems This section provides the basic gui deline s for con necting the Catal yst 4500 series switch DC-i nput power supplies to th e site power so ...

  • Cisco Systems WSC4500X24XIPB - page 85

    2-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or DC -Pow ered Syste ms Calculating DC Input Current Complet e po wer usage table s are i n the Catalyst 4500 S eries Module In stallation Guide . T o calculat e the DC input curren t needed for data an d i ...

  • Cisco Systems WSC4500X24XIPB - page 86

    Chapter 2 Preparing for Installation Ventil ation 2-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Add the DC input curre nt used by data and the DC input cu rren t used by inline devices to find the total DC input current . • T otal DC input current = 6.14 + 1.4 = 7.5 4 A. Ventilation Planni ng a proper loc ation for th e ...

  • Cisco Systems WSC4500X24XIPB - page 87

    2-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Ventilation Appendix A , “Speci fications,” lists the operating and nonoper ating en vironmental site r equirement s for the switches. T o maintain normal operation and ensure high system av a ilability , maintain an ambient tem perature ...

  • Cisco Systems WSC4500X24XIPB - page 88

    Chapter 2 Preparing for Installation Site-Planni ng Checklist 2-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note Alth ough a class 3 device nee ds 15.4 W t o power up, 17 .3 W nee d to be gene rated from the ba ckplane i n order to have 15.4 W at the switch por t. 17.3 W comes from the WS-X4248 -RJ45V D C-DC con verter’ s effi ...

  • Cisco Systems WSC4500X24XIPB - page 89

    2-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Site-Planning Checklist 3 Power evaluation: • Input power type • Rece ptacle pr oximit y to the equi pmen t • Dedic ated (separat e) circ uits fo r redun dant powe r supplies • UPS for po wer fai lure s 4 Gr ounding evaluation: • Ci ...

  • Cisco Systems WSC4500X24XIPB - page 90

    Chapter 2 Preparing for Installation Site-Planni ng Checklist 2-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 ...

  • Cisco Systems WSC4500X24XIPB - page 91

    C HAPTER 3-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 3 Installing the Switch in a Rack War ni ng This unit is intended for installat ion in restricted access area s. A restricted access area can be accessed only thro ugh t he use of a special tool, lock and key , or other m eans of security . Statement 1017 War ni ng Only tr ...

  • Cisco Systems WSC4500X24XIPB - page 92

    Chapter 3 Installing the Switch in a Rack Checking the Sh ipping Con tainer C ontents 3-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note For info rmation on inst alling the superviso r engine and sw itching modu les and verif ying switch operatio n, refer to the Catalyst 4500 Series Modu le Installation Guide . F or infor mation ...

  • Cisco Systems WSC4500X24XIPB - page 93

    3-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Rack-Mounting the Switch A standa rd rac k-mount kit is include d for m ountin g the switch in a stand ard 19-inc h (48.3 cm) eq uipmen t rack with two unobstr ucted ou ter posts, with a nomina l depth (betw een th ...

  • Cisco Systems WSC4500X24XIPB - page 94

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Rack-Mounting Catalyst 4500 Series Switc hes Foll ow these step s to in stall a Cata lyst 4500 se ries switch in a rack: Step 1 Prepare for instal lation a s foll o ws: a. Place the cha ssis on the floo r or on a stu ...

  • Cisco Systems WSC4500X24XIPB - page 95

    3-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Note Some equipm ent racks provid e a power strip alon g the lengt h of one of the rear posts . If your rack ha s this featu re, conside r the position of the strip when plan ning fastene r points. Before instal li ...

  • Cisco Systems WSC4500X24XIPB - page 96

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 3-1 L Brack ets on th e Front Edge of the Ca taly st 45 03 Swit ch 1 1 3 1 1 3 1 1 3 1 1 3 79182 4 5 0 6 U P L I N K 1 U P L I N K 2 A C T IV E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I Z A ...

  • Cisco Systems WSC4500X24XIPB - page 97

    3-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figu re 3-2 L Brack ets on th e Front Edge of the Ca taly st 45 06 Swit ch 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79183 U P L I N K 1 U P L I N K 2 A C T I V E L I N E A C T IV E L I N E A C T I V E R E S E T U T I L ...

  • Cisco Systems WSC4500X24XIPB - page 98

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 3-3 L Brack ets on th e Front Edge of the Ca taly st 45 07R Swi tch 68113 W S -X 4 44 8-G B -R J4 5 S T A TU S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 ...

  • Cisco Systems WSC4500X24XIPB - page 99

    3-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figu re 3-4 L Brack ets on th e Front Edge of the C ata lys t 451 0R Switch c. Attach th e cable guid e, if ne eded, using the M3 s cre ws provid ed in th e cabl e manag ement kit . The ca ble gu ide attach es to t ...

  • Cisco Systems WSC4500X24XIPB - page 100

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-5 At tac hing the Cable G uide t o the C atalyst 4503 Sw itc h 1 1 3 1 1 3 1 1 3 1 1 3 79184 4 5 0 6 U P L I N K 1 U P L I N K 2 A C T I V E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I Z A ...

  • Cisco Systems WSC4500X24XIPB - page 101

    3-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-6 At tac hing the Cable G uide t o the C atalyst 4506 Sw itc h 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79185 U P L IN K 1 U P L I N K 2 A C T I V E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I ...

  • Cisco Systems WSC4500X24XIPB - page 102

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-7 At tac hing the Cable Guid e t o the C atalyst 4507R Sw itc h 68114 W S -X 4 44 8-G B -R J4 5 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 ...

  • Cisco Systems WSC4500X24XIPB - page 103

    3-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-8 At tachi ng the Cabl e Guide t o the C atalyst 4 51 0R Swi tch Step 3 Install th e chassis in the rack as follo ws: a. Insert the rear of the chas sis be tween the mo unti ng post s. See Figure 3-9 to ...

  • Cisco Systems WSC4500X24XIPB - page 104

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 c. Secure the chas sis using at least six (three p er si de) 1 2-24 x 3/4-i nch scre ws through the el ongated holes in the L brack et and into the threaded holes in the mounting po st. d. Use a tape measure and le ...

  • Cisco Systems WSC4500X24XIPB - page 105

    3-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 0 Instal ling a Ca talyst 45 06 S witc h in th e Rac k 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79187 U P L IN K 1 U P L I N K 2 A C T I V E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I Z A T ...

  • Cisco Systems WSC4500X24XIPB - page 106

    Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 1 Instal ling a Catalyst 4507R S witc h in the Rack 68115 W S -X 44 48 -G B -RJ 45 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 ...

  • Cisco Systems WSC4500X24XIPB - page 107

    3-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 2 Installing a Ca talyst 451 0R S witch i n the Rac k Step 4 Make sure t hat t he ej ector le v ers are compl etely closed an d the super visor engi ne and switc hing module s are install ed securely . ...

  • Cisco Systems WSC4500X24XIPB - page 108

    Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Connect t he switch to an app ropriate ground. Refe r to System Ground Conn ection Guidel ines, page 3-18 . T he system m ust have a ground con nection before p ower is supplied to the switch. Sys ...

  • Cisco Systems WSC4500X24XIPB - page 109

    3-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Figur e 3-1 4 Catalyst 4506 Gr ounding Holes 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79480 45 06 U P L I N K 1 U P L I N K 2 A C T I V E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I Z A T ...

  • Cisco Systems WSC4500X24XIPB - page 110

    Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 5 Catalyst 4507R Gr ounding Hole s 79481 W S - X 4 4 4 8 - G B - R J 4 5 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 ...

  • Cisco Systems WSC4500X24XIPB - page 111

    3-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Figur e 3-1 6 Catalyst 451 0 R Gr ounding Ho les 93937 W S -X 4 44 8 -G B -R J4 5 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 ...

  • Cisco Systems WSC4500X24XIPB - page 112

    Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Parts an d Requ ired Tools Note Some parts and required tools described in this section are not a va ilable from Cisco Sys tems. Th e groundin g lug and assoc iated scr e ws are i ncluded wit h the acces ...

  • Cisco Systems WSC4500X24XIPB - page 113

    3-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Connectin g System Ground a nd Power This section describ es how to conne ct the Catalyst 4500 series switche s to earth ground. Th e system gro und connec tion is requ ired if FXS modul es are insta ...

  • Cisco Systems WSC4500X24XIPB - page 114

    Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 7 Connecting Sys te m Gr ound on th e S witc h Step 5 Remove the label th at covers the groundi ng pad. Step 6 Place t he groun ding lug against t he grou nding pa d, alig ning the holes. Ins ...

  • Cisco Systems WSC4500X24XIPB - page 115

    3-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Ensure t hat the g rounding lu g and t he attac hed wire will not interf ere with o ther switch ha rdware or ra ck equip ment. Step 7 T ighten t he screws to secure t he gro unding l ug to the grou n ...

  • Cisco Systems WSC4500X24XIPB - page 116

    Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08 ...

  • Cisco Systems WSC4500X24XIPB - page 117

    C HAPTER 4-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 4 Removing and Replacing FRUs War ni ng Read the installation instructi ons bef ore connecting the sy stem to the power source. Statement 10 04 War ni ng Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 10 30 ...

  • Cisco Systems WSC4500X24XIPB - page 118

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 This chapte r tells you ho w to remo ve and repla ce Catalyst 4500 serie s fi eld-repla ceable un its (FR Us). The informa tion is pr esented in t hese sectio ns: • Removing and Replacin g the Po wer Su ...

  • Cisco Systems WSC4500X24XIPB - page 119

    4-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-1 AC-Input P ow er Supply Figur e 4-2 4200 W Dual-Input A C P ower Sup ply Captive screws Power switch AC receptacle 79136 100-120V- 12A 50/60Hz Captive screws AC input 2 receptacle 1301 ...

  • Cisco Systems WSC4500X24XIPB - page 120

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-3 DC-Input P o w er Supply Figur e 4-4 1400 W DC T ripl e-input P o w er Supply Captive screw Captive screw In-line power s witch Serial communication connector Main power s witch T er minal blo ...

  • Cisco Systems WSC4500X24XIPB - page 121

    4-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Required To ols Y ou will need a flathe ad or Phillips scre wdrive r to p erform th ese proce dures. Removin g an AC-Input P ower Supply Foll ow th ese steps to remov e the A C- input po wer suppl ...

  • Cisco Systems WSC4500X24XIPB - page 122

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-6 Loosenin g the Side-C lamp Scr ew Step 3 Disconne ct the power cord fr om the power supply bei ng removed. Step 4 Loosen the tw o capti v e sc re ws (see Figure 4-7 ). Figur e 4-7 Loosenin g t ...

  • Cisco Systems WSC4500X24XIPB - page 123

    4-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Cautio n Use both hand s to grasp a power sup ply . Step 5 Grasp the power supply han dle with o ne hand. Place you r other hand unde rneath to suppo rt th e bottom of th e power supp ly , a s sho ...

  • Cisco Systems WSC4500X24XIPB - page 124

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Installing an AC-Input Power Supply War ni ng The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1 019 Foll ow these steps to instal ...

  • Cisco Systems WSC4500X24XIPB - page 125

    4-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-9 Plugging the P o w er Cor d into the P o w er Supply Step 10 Connect the other en d of the power cord to an A C-power input so urce. Cautio n In a system with multip le po wer supplies ...

  • Cisco Systems WSC4500X24XIPB - page 126

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 12 V erif y power supply operati on by checki ng the power supply’ s front-pane l LEDs. Y ou should se e the f ollowing: • The LED labeled G OOD is gree n. • The LED labeled F AIL is not lit. ...

  • Cisco Systems WSC4500X24XIPB - page 127

    4-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Removin g a DC-Input Po wer Supply This se ction de scribes how to rem ov e a D C-input p ower supply . Required Tools Y ou will need th e foll ow ing tools to perf orm this pr ocedure: • A Phi ...

  • Cisco Systems WSC4500X24XIPB - page 128

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-1 1 DC-Input P ow er Supply Figur e 4-1 2 DC T r iple -input P ower Supp ly Captive screw Captive screw In-line power s witch Serial communication connector Main power s witch T er minal bloc k ...

  • Cisco Systems WSC4500X24XIPB - page 129

    4-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Step 5 Disconne ct the DC -input wire s from the t erminal block. D isconnect the groun d wire last ( see Figure 4-13 or Figure 4-14 ). War ni ng When installing or replacing the unit, the ground ...

  • Cisco Systems WSC4500X24XIPB - page 130

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Using a screwdriver , loos en and remove the captive screws on the power suppl y . (See Fi gure 4-15 , which sho ws the single input po wer supp ly . The tr iple-input po wer supply has capti ve s ...

  • Cisco Systems WSC4500X24XIPB - page 131

    4-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-1 6 Handling a DC-Input P ower Suppl y Step 8 If the bay is to remain empty , install a blank po wer supply f iller plate o ver the opening and secure it with the mountin g screws. This ...

  • Cisco Systems WSC4500X24XIPB - page 132

    Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Installing a DC-Input Power Supply This se ction de scribes how to install a DC-i nput p o wer su pply . Required Tools Y ou will need th e foll ow ing tools to perf orm this pr ocedure: • A Phillips s ...

  • Cisco Systems WSC4500X24XIPB - page 133

    4-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Foll ow th ese steps to install a DC-input po wer supply , connect it to a power source, and verify its o peratio n: Step 1 V erify that p owe r is of f to th e DC circu it or circu its on the po ...

  • Cisco Systems WSC4500X24XIPB - page 134

    Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 8 V eri fy power supply operat ion by chec king the power supply’ s front-pa nel LEDs . Y ou should se e the f ollowing: • The LE D labele d INPU T OK is gre en. • The LED labeled OU ...

  • Cisco Systems WSC4500X24XIPB - page 135

    4-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Figu re 4-17 Cataly st 450 3 System Fan Ass embl y 1 1 3 1 1 3 1 1 3 1 1 3 79172 U P L I N K 1 U P L I N K 2 A C T I V E L IN E A C T I V E L I N E A C T IV E R E S E T U T I L I Z A T I O ...

  • Cisco Systems WSC4500X24XIPB - page 136

    Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 4-18 Cataly st 450 6 System Fan Ass embl y 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79171 U P L I N K 1 U P L I N K 2 A C T I V E L I N E A C T IV E L I N E A C T IV E R E S E T U T I L I Z ...

  • Cisco Systems WSC4500X24XIPB - page 137

    4-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Figu re 4-19 Cataly st 450 7R System F an As semb ly 68116 Captive installation screws Fan assembly W S -X 44 48 -G B -R J45 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 ...

  • Cisco Systems WSC4500X24XIPB - page 138

    Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 4-20 Cat alyst 4 51 0 R System Fan Asse mbly Required To ols Y ou will need a Philli ps scre wdr i ver f or the f ollo wing tw o pr ocedures. 4 3 4 2 3 1 2 W S-X 44 48 -G B -R J45 S T A ...

  • Cisco Systems WSC4500X24XIPB - page 139

    4-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Removin g the Fa n Assembly War ni ng When removing the fan tray , keep your hands and fingers away from the spinning fan blades. Let the fan blades completely stop before you remove the fa ...

  • Cisco Systems WSC4500X24XIPB - page 140

    Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Verifying the Installation Note T o che ck th e opera tion of the fa ns, you n eed t o power up th e ch assis. Foll ow th ese steps to verif y that the ne w fan assembly w as i ...

  • Cisco Systems WSC4500X24XIPB - page 141

    4-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 3 Remove all supervi sor engines a nd switching mod ules from the chassis, a nd find the backp lane mod ules yo u need to rep lace. Note Keep a rec ord of switch ing mod u ...

  • Cisco Systems WSC4500X24XIPB - page 142

    Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-2 1 Catalyst 45 07R Bac kplane Mux buff ers Clock module 130657 ...

  • Cisco Systems WSC4500X24XIPB - page 143

    4-27 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 4 If you are removing a cloc k mod ule, rem ove the two sc rews that atta ch the mod ule to th e ba ckplan e. Step 5 Find the seat ing lev ers on both sides of the connec ...

  • Cisco Systems WSC4500X24XIPB - page 144

    Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-28 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 7 Pull ou t the m odule w hile hol ding the top left an d top r ight corners. (See Figure 4-24 .) Note When handlin g the m odules, do not touch t he ch ips or t he gol d ...

  • Cisco Systems WSC4500X24XIPB - page 145

    4-29 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 9 Make sure the module is fully seated. (See Figure 4-26 .) Figur e 4-2 6 Cor r ect M odule Seating Step 10 Push the m odule toward the ba ck of the c hassis an d make sur ...

  • Cisco Systems WSC4500X24XIPB - page 146

    Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-30 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Verify the New Modules After the switch i s reassembled and po we r is restored, conne ct a terminal to the supervis or engine and m onitor t he boot process. Look f or the f o ...

  • Cisco Systems WSC4500X24XIPB - page 147

    C HAPTER 5-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 5 Troubleshooting If your system has prob lems du ring st art up or ope ration, use t he info rmati on in this chap ter to help isola te the c ause. Pr oblems with the in itial st artup ar e often caused by a sw itching m odule tha t has beco me disl odged fro m the ba ckp ...

  • Cisco Systems WSC4500X24XIPB - page 148

    Chapter 5 Troubleshoot ing System B oot Verifica tion 5-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note This chapte r cov ers only the chass is comp onent hardwa re as pects of troublesh ooting . For configurati on issues, refe r to the softwa re configurat ion guide or comm and re ference for your swit ch. System Boot Verificat ...

  • Cisco Systems WSC4500X24XIPB - page 149

    5-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Problem Solving to the System Comp onent Level Problem Solving to the System Co mponent Level The ke y to success when troublesho oting the system is to isolate the problem to a specif ic system c omponent. Y our fi rst step is to compare wha t the system ...

  • Cisco Systems WSC4500X24XIPB - page 150

    Chapter 5 Troubleshoot ing Using L EDs to Identify Startup P roblems 5-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Using LEDs to Identify Startup Problems All sy stem state s in the star tup sequ ence ar e in dicat ed using LED s. By c heckin g the LEDs, you can determine wh en and where the system failed in the startu p sequenc ...

  • Cisco Systems WSC4500X24XIPB - page 151

    5-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Using LEDs to Identify Startup Problems Step 4 V erify that the L EDs lab eled ST A TUS on e ach swit ching m odule are g reen when the supervisor engine completes initializ ation. This LED indicate s that the supervisor engine an d switching modul es are ...

  • Cisco Systems WSC4500X24XIPB - page 152

    Chapter 5 Troubleshoot ing Troublesho oting the Power Supply 5-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troubleshooting the Power Supply T o help isolate a power subsystem problem, follo w these steps: Step 1 Check whether the pow er supply LED labe led GOOD is on or the LED labeled F AIL is on. (on the DC mu lti-in put power ...

  • Cisco Systems WSC4500X24XIPB - page 153

    5-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troubleshooting the Power Supply If you are una ble to resol ve the probl em, or if you det ermine t hat eithe r a power supply or ba ckplan e connec tor is faulty , contact the Cisco T e chnical Assistance Cente r (T A C) fo r inst ruct ion s. Troublesho ...

  • Cisco Systems WSC4500X24XIPB - page 154

    Chapter 5 Troubleshoot ing Troub leshooting the Fan A ssemb ly 5-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 The 1400 W DC mu lti-in put supply can not be used with other power supp ly types, but other power suppli es in this produ ct line work with the other type s during an upgr ade. I f you mi x power supp lies in a Cata lyst ...

  • Cisco Systems WSC4500X24XIPB - page 155

    5-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troubl eshoo ting Backplan e Module s C4K_IOSM ODPOR TMAN-4-F ANTRA YP AR TI ALF AILURE C4K_IOSM ODPOR TMAN-4-F ANTRA YREMO VED C4K_SUPER VISOR-3-F ANTRA YREADF AILED C4K_SUPER VISOR-3-F ANTRA YSEEPR OMR EADF AILED C4K_SUPER VISOR-3-F ANTRA YSEEPR O MINV ...

  • Cisco Systems WSC4500X24XIPB - page 156

    Chapter 5 Troubleshoot ing Troubles hooting Sw itching Modules 5-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • The swi tch powers down and s tays down for a few minutes to a few days for no cl ear r eason . • The o utput-fail LED on the power supplie s are re d and no power is d elivered to th e ch assis. The other LED s on ...

  • Cisco Systems WSC4500X24XIPB - page 157

    5-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S witch ing M odu les Figur e 5-2 1 0 /1 00 BA SE-T P ort LEDs 17407 STATUS 4 1 2 3 4 5 5 6 6 7 7 8 8 9 9 10 10 11 12 11 12 WS-X4148-RJ 4 PORT 10/100 B T able 5-1 Switc hing Module LEDs LED Color/State Description ST A TUS Indicates th ...

  • Cisco Systems WSC4500X24XIPB - page 158

    Chapter 5 Troubleshoot ing Troubles hooting Sw itching Modules 5-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troublesho oting Switc hing Modu les Using Cis co IOS Connect a term inal to the conso le port, and loo k for any of the follo wing system messages: C4K_CHASSIS- 3-LINEC ARDMUXBUFFE R TOSUP ALIGNMENTWR ON G C4K_CHASSIS- 3 ...

  • Cisco Systems WSC4500X24XIPB - page 159

    5-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S uperv iso r Engi nes Troubleshooting Supervi sor Engine s This se ction on ly add resses pr oblems w ith hard ware. Proble ms with features or configurati on are not c ov ered h ere. R efer f or your software c onfigurati on guide an ...

  • Cisco Systems WSC4500X24XIPB - page 160

    Chapter 5 Troubleshoot ing Troubles hooting Supervi sor Engines 5-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troublesho oting Supe rvisor Engines Us ing Cisco IOS Connect a term inal to the conso le port, and loo k for any of the follo wing system messages: C4K_CHASSIS- 3-LINEC ARDMUXBUFFE R TOSUP ALIGNMENTWR ON G C4K_SUPER VIS ...

  • Cisco Systems WSC4500X24XIPB - page 161

    5-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S uperv iso r Engi nes C4K_REDUND ANCY -2-HANDSHAKE_ TIMEOUT C4K_REDUND ANCY -2-POSTF AIL_RESET C4K_REDUND ANCY -2-INCOMP A TIBLE_SUPER VISORS C4K_REDUND ANCY - 2-IOS_VE RSION_C HECK_F AIL C4K_REDUND ANCY -2-IOS_VE RSION_I NCOMP A TIBL ...

  • Cisco Systems WSC4500X24XIPB - page 162

    Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Some probl ems can be solved by resetti ng the supervi sor engin e. Use the hw-module module <n> reset power -cycle command to r eset a switching module, or remove and re-insert the sw itching mo dule ...

  • Cisco Systems WSC4500X24XIPB - page 163

    5-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Contacti ng the Cisco Te chnica l Assistance Center See the “Obt ainin g T echnical Assi sta nce” sect ion on page xx for more inform ation about conta cting the T AC. Serial Nu mbers When yo u contact Cisco T echnica l Assis tance, ha ve the seri al ...

  • Cisco Systems WSC4500X24XIPB - page 164

    Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 5-4 Catalyst 4506 Ser ial Numbe r Location 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 105729 4 5 0 6 U P L I N K 1 U P L IN K 2 A C T I V E L I N E A C T I V E L I N E A C T I V E R E S E T U T I L I Z A T ...

  • Cisco Systems WSC4500X24XIPB - page 165

    5-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Contacti ng the Cisco Te chnica l Assistance Center Figur e 5-5 Catalyst 45 07R Ser ial Numbe r Location 105730 W S -X 44 48 -G B -R J45 S T A T U S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 ...

  • Cisco Systems WSC4500X24XIPB - page 166

    Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 5-6 Catalys t 451 0R Ser i al Number Locati on 113784, 781-00251-01A0 W S-X4448-G B-RJ45 STA TUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 ...

  • Cisco Systems WSC4500X24XIPB - page 167

    A-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 APPEND IX A Specifications Cable and technical sp ecif ication s for Catalyst 4500 series switch es are p rovided in the follo wing sections: • Catalyst 4503 Switch Specif ica tions, page A-2 • Catalyst 4506 Switch Specif ications, page A-3 • Catalyst 4507R Swit ch Specificat ...

  • Cisco Systems WSC4500X24XIPB - page 168

    Append ix A Specifications Cata lyst 4503 Swit ch Spe cifi catio ns A-2 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4503 Switch Specifications Ta b l e A - 1 lists the Catalyst 45 03 switch specific ations. T able A -1 Catalyst 4503 S witc h Specifi cations Item Specification Envi ro nmen t al T emp erat ure, ambi ent op ...

  • Cisco Systems WSC4500X24XIPB - page 169

    A-3 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4506 Switch Specifica tions Catalyst 4506 Switch Specifications Ta b l e A - 2 lists the Catalyst 45 06 switch specific ations. Powe r PoE suppl ied –48 VDC Power to Module s and fans 12 VDC Power to ba ckplan e compo nents 3.3 VDC Redundancy S ...

  • Cisco Systems WSC4500X24XIPB - page 170

    Append ix A Specifications Catalyst 4507R Switch Spe cifications A-4 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4507R Switch Specifications Ta b l e A - 3 lists the Catalyst 45 07R switch sp ecif ication s. Phy sical Character istics Dim ensions (H x W x D) 1 7.38 x 1 7.31 x 12.5 0 in. (44.13 x 43.9 7 x 31.7 0 cm) W eigh ...

  • Cisco Systems WSC4500X24XIPB - page 171

    A-5 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4507R Switch Sp ecification s Humi dity (RH) , ambient (noncond ensin g): operati ng nono peratin g and st orage 10 to 9 0% 5 to 95% Altitude: operati ng nonope rating –500 to 650 0 ft (–150 to 200 0 m) –1000 t o 30 ,000 ft ( –300 to 9150 ...

  • Cisco Systems WSC4500X24XIPB - page 172

    Append ix A Specifications Catalyst 4510R Switch Spe cifications A-6 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4510R Switch Specifications Ta b l e A - 4 lists the Catalyst 4 510R switch specif icatio ns. T able A -4 Catalyst 45 1 0R Switc h Spec ifications Item Specification Envi ro nmen t al T emp erat ure, am bient o ...

  • Cisco Systems WSC4500X24XIPB - page 173

    A-7 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Catalyst 4500 Series Power Supplies Ta b l e s A-5 through A-12 list the specif icati ons for the Cata lyst 4500 series p o wer supplies. Note All Catalyst 4500 serie s switc h A C-input po wer suppl ies requi re singl ...

  • Cisco Systems WSC4500X24XIPB - page 174

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-8 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 T able A -5 1 0 00 W AC-Input P ow er Supply Specificatio ns Item Specification Minim um software re quiremen t Ci sco IOS Releas e 12.1(12c )EW Catal yst Operati ng System software v ersion 7.4 (1) Power over Ethernet No ...

  • Cisco Systems WSC4500X24XIPB - page 175

    A-9 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Power supply output 1300 W maximum 1000 W+ 40 W redundan t mode (Dat a) 1667 W maxi mum i n co mbined mode ( Data) 800 W maxi mum each in redundant mod e (PoE) 1333 W maxi mum i n combi ned mo de (P oE) Power supply ou ...

  • Cisco Systems WSC4500X24XIPB - page 176

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-10 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Cautio n Do not m ix the 1400 W DC power sup ply wit h any oth er power supp ly , even for a hot swap or othe r short-term em ergency . Doing so ca n seriously damage you r switch. The 1400W D C Input power supply may be ...

  • Cisco Systems WSC4500X24XIPB - page 177

    A-11 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies DC-i nput curren t Data only: 31 A @ –60 VDC Data and inline devices: 180 A maxi mum @ –48 VD C input Note The inpu t power is configur able in the CLI. The Cisc o IOS co mman d is power dc input . Th e Catalyst O ...

  • Cisco Systems WSC4500X24XIPB - page 178

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-12 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Cataly st 4503-Speci fic Power Usage (data onl y) Maximu m draw 475 W Maximu m input 633 W Current dra w at –40.5 V (min voltage) Current dra w at –72 V (max v oltage) 15.6 A 8.8 A Max heat dissipa tion at 6 33 W 216 ...

  • Cisco Systems WSC4500X24XIPB - page 179

    A-13 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies T able A -9 1 400 W DC T r iple-In put P o w er Supply Spec ifications Item Specification Minim um software requi rement Cisco IOS Rele ase 12.2(2 5)EW Power ov er Ethern et Not supp orted DC-input v oltag e Domestic ...

  • Cisco Systems WSC4500X24XIPB - page 180

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-14 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4503-Specifi c Po wer Usage (data on ly) T wo mo dules minimum required @ –40. 5 VDC input One 1 5A modu le minim um requi red @ –44 V DC input Maximu m draw 475 W Maximu m input 609 W total / # of modul es ...

  • Cisco Systems WSC4500X24XIPB - page 181

    A-15 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies T able A -1 0 Input Modes Input Mode Input Number Input Configuration Maximum T otal Output Power 1 1 1 x 12.5 A 386 W @ –40 .5 VDC 412 W @ –44.0 VDC 2 2 OR 3 1 x 15 A 466 W @ –40.5 VDC 495 W @ –44.0 VDC 3 1, ...

  • Cisco Systems WSC4500X24XIPB - page 182

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-16 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 T able A -12 2800 W AC-In put P o w er Supply Specificatio ns Item Specification Minim um software re quiremen t Cisco IOS Release 12 .1(13)EW Catalyst Opera ting System softwar e version 7.5 (1) Power ov er Ethern et Su ...

  • Cisco Systems WSC4500X24XIPB - page 183

    A-17 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Note Th e 4200 W AC po wer supply should not be used i n mixed-voltage conf igurations. All the inputs in a chassis must be at the same v oltage (110 V A C or 220 V A C). T able A -13 4200 W AC-In put P o w er Supply ...

  • Cisco Systems WSC4500X24XIPB - page 184

    Append ix A Specifications Catalyst 4500 Series Power Supplies A-18 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Ta b l e A - 1 4 shows the wattage outpu t possible with t he 4200W power supply in redunda nt mode. In red undan t mode, both power supplie s must have identical inputs an d all inputs mu st be at the same v oltage. If ...

  • Cisco Systems WSC4500X24XIPB - page 185

    B-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 APPEND IX B Repacking a S witch If you need to retu rn your Catalyst 4500 se ries s witch to the fa ctory , use the instruct ions i n this a ppendix to re pack your switch in pre parati on for s hipping . T o re pack the switch usin g the origin al pack aging ma terial, fol low the ...

  • Cisco Systems WSC4500X24XIPB - page 186

    Appendix B Repacking a Switch B-2 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Figur e B -1 Catalyst 45 00 Ser ies Sw itc h P ac king Ma t er ial Packing carton Packing foam Packing foam Packing foam Documentation and accessories 68117 ...

  • Cisco Systems WSC4500X24XIPB - page 187

    IN- 1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 INDEX Numerics 10/100BAS E-T port LED s 5-11 1000BASE -T interfac es 1-3, 1-7, 1-11, 1- 15 1000BASE -X Etherne t interf aces 1-19 port a nd statu s LEDs (figure ) 5-10 1000 W p ower su pplies power co rd plugs 2-5 power co rds (table ) 2-6 100BASE- T interfac es 1-3, 1-7, 1-11, 1 ...

  • Cisco Systems WSC4500X24XIPB - page 188

    Index IN-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 autonegotiati on Catalyst 4503 switche s (table) 1-3 Catalyst 4506 switche s (table) 1-7 Catalyst 4507 switche s (table) 1-11, 1-15 B boot pr ocess troublesh ooting 5-2 brackets See L b racket s C cable s ESD 2-2 Catalyst 4503 switch es attach ing cable gu ide s (figur e) 3-12, ...

  • Cisco Systems WSC4500X24XIPB - page 189

    IN- 3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index D DC-inp ut power supplie s connec ting syst em grou nd 3-23 descript ion 1-31 environm ental monitori ng 1-35 figure 1-32, 1-33, 4-4 handling (figur e) 4-15 installing 4- 16 removi ng 4-11 replaci ng 4-16 See also AC-i nput power supplies troublesh ooting 5-6 verify ing op ...

  • Cisco Systems WSC4500X24XIPB - page 190

    Index IN-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 fiel d-re place able unit s See FRUs Flash code troublesh ooting 5-5 FRUs AC-inp ut power supplie s 4-5 to 4-10 DC-inp ut power supplie s 4-11 to 4-18 fan assemblies 4-18 to 4-24 G Giga bi t E thern et See 1000BA SE-T See 1000BA SE-X GOOD LED s checki ng 4-10 troublesh ooting 5 ...

  • Cisco Systems WSC4500X24XIPB - page 191

    IN- 5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index checki ng po wer suppl ies 5-4 checki ng supe rviso r engin es 5-2 See also specific types of LEDs Link L ED descript ion (tabl e) 1-24 LINK LE Ds (tabl e) 5-11 load sh aring, po wer su pplies 1-35 M MAC addr esses supported on Ca talyst 4503 switc hes (table) 1-18 manageme ...

  • Cisco Systems WSC4500X24XIPB - page 192

    Index IN-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 S serial num bers 5-16 ship pi ng i nstr ucti ons B-1 show system command 4-10 site planni ng chec klist 2-16 slots Catalyst 4503 swit ches (f igure) 1-3 Catalyst 4506 swit ches (f igure) 1-7 Catalyst 4507 swit ches (f igure) 1-11, 1-15 specifi cati ons Catalyst 4503 switche s ...

  • Cisco Systems WSC4500X24XIPB - page 193

    IN- 7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index UTILI ZATION LEDs descript ion (tabl e) 1-24 V voltage specifi cati ons A-10, A-13 W weight Catalyst 4503 switche s (table) A-2 Catalyst 4506 switche s (table) A-4 Catalyst 4507 switche s (table) A-5, A- 6 ...

  • Cisco Systems WSC4500X24XIPB - page 194

    Index IN-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems WSC4500X24XIPB can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- WSC4500X24XIPB manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems WSC4500X24XIPB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems WSC4500X24XIPB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems WSC4500X24XIPB, service manual, brief instructions and user manuals Cisco Systems WSC4500X24XIPB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems WSC4500X24XIPB.

A complete manual for the device Cisco Systems WSC4500X24XIPB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems WSC4500X24XIPB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems WSC4500X24XIPB.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems WSC4500X24XIPB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems WSC4500X24XIPB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems WSC4500X24XIPB, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems WSC4500X24XIPB - which should help us in our first steps of using Cisco Systems WSC4500X24XIPB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems WSC4500X24XIPB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems WSC4500X24XIPB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems WSC4500X24XIPB?

Use the form below

If you did not solve your problem by using a manual Cisco Systems WSC4500X24XIPB, ask a question using the form below. If a user had a similar problem with Cisco Systems WSC4500X24XIPB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)