Manual Planar LAN Command Potocol

21 pages 0.14 mb
Download

Go to site of 21

Summary
  • Planar LAN Command Potocol - page 1

    Plan ar PS5580 RS232 and LAN Comm and Protocol ...

  • Planar LAN Command Potocol - page 2

    Copyright © 4 F eb 2014 by Plan ar Systems, Inc. All rights reserved. Contents of this publication may not be reproduced in any form without permission of Plan ar Sys tem s, I nc. T rademark Credits Windows™ is a trademark of Microsof t Corp. All other names ar e trademarks or r egister ed tradem arks of their respective co mpanies. Disclaimer T ...

  • Planar LAN Command Potocol - page 3

    PS5580 RS232 and LAN Command Protocol T able of Contents Co mmand Protoc ol Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Command Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Planar LAN Command Potocol - page 4

    Command Protocol PS5580 RS232 and LAN Command Protocol 1 Comm and Protocol Description This document specifies the prot ocol s used on the PS55 80 RS232 and LAN connectors. Comm and Protocol Comm unications Link Communication between the host and the dis pla y can be either a standard RS232 connection or a standard LAN connection. Comm unication Se ...

  • Planar LAN Command Potocol - page 5

    Broadcast Command Format PS5580 RS232 and LAN Command Protocol 2 Definition of terms in Directly Addressed Command F ormat table: • ST X is the ascii ST X charac ter (0x02). • Command is the command code . • Le ng t h is the number of bytes in the Grou p ID , Multi ID , Mode and Data fields. • Group ID is the Gr oup ID value in the display ...

  • Planar LAN Command Potocol - page 6

    Command / Response Examples PS5580 RS232 and LAN Command Protocol 3 Example: Set powe r to off (G r oup ID = B, Multi ID = 1) Example: Set power to off (broadcast) ST X CMD LEN GID MID MOD DA T CHK ETX C o m m a n d 0 21 10 30 20 10 2 0 3 Response 02 11 03 02 01 02 E4 03 ST X CMD LEN GID MID MOD DA T CHK ETX C o m m a n d 0 21 10 20 00 0 0 3 Respon ...

  • Planar LAN Command Potocol - page 7

    PS5580 RS232 and LAN Command Protocol 4 Comm ands Suppor ted in the PS5580 Display Name Command Broad cast Supported Read/Write Len gt h Len gt h (B ro ad c as t Mode Data Bytes Response Length Response Data Example (Gr oup ID = ‘ A ’ , Multi ID = 4) Example (Broadcast) Auto C alibration 0x61 Y W 3 2 0x02 = W rite [None] 9 Byte 1: Red Gain (Ran ...

  • Planar LAN Command Potocol - page 8

    PS5580 RS232 and LAN Command Protocol 5 Color Spa ce Configuration 0xB4 Y W 4 3 0x02 = Write Byte 1: Color Space - 0x00 = Auto - 0x01 = RGB PC - 0x02 = RGB Video 4 Byte 1: C olor Spac e - 0x00 = Auto - 0x01 = RGB PC - 0x02 = RGB Video Set C olo r Spa ce = A uto : Command : 02 B4 04 01 04 02 00 03 Response: 02 B4 04 01 04 02 00 3E 03 Set C olor Spac ...

  • Planar LAN Command Potocol - page 9

    PS5580 RS232 and LAN Command Protocol 6 Get F irmw are Ve r s i o n 0xF9 N R 3 N/A 0x00 = Read [None] 19 Bytes 1-2: Scaler Firm ware Y ear (last two digits) Bytes 3-4: Scaler Firmware Month (two digits) Bytes 5-6: Scaler Firmware Day (two digits) Bytes 7-8: Scaler Firmware Revision (two digits) Bytes 9-10: M icom Firmware Y ear (last two digits) By ...

  • Planar LAN Command Potocol - page 10

    PS5580 RS232 and LAN Command Protocol 7 Get L CD Status 0x87 N R 3 N/A 0x00 = Read [None] 12 Byte 1: P ower Stat us - 0x00 = Off - 0x01 = On Byte 2: In put Sourc e - 0x01 = DisplayP ort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byte 3: Resolution 2 Byte 4 : Col or T emp - 0x01 = 4000K - 0x02 = 6500K - 0x03 = 10000K - 0x04 = User Mode ...

  • Planar LAN Command Potocol - page 11

    PS5580 RS232 and LAN Command Protocol 8 Get Model Na me and Seria l Number 0xB9 N R 3 N/A 0x00 = Read [None ] 25 Bytes 1-9: Model N ame Bytes 10-22: Serial Num ber Model Name = PS5580 Serial Number = ABCDEFGHIJKLM Command : 02 B9 03 01 04 00 03 Response: 02 B9 19 01 04 00 50 53 35 35 38 30 00 00 00 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 16 0 3 N/A ...

  • Planar LAN Command Potocol - page 12

    PS5580 RS232 and LAN Command Protocol 9 Get P icture Contro l D ata 0x90 N R 3 N/A 0x00 = R ead [None] 24 Byte 1: In put Sourc e - 0x01 = DisplayP ort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byte 2: Brightness (R ange 0x00-0x64) Byte 3: Contrast (Rang e 0x00-0x64) Byte 4: Sharpness (Range 0x 00-0x18) Byte 5: Tint (R ange 0x4D -0xB1 ...

  • Planar LAN Command Potocol - page 13

    PS5580 RS232 and LAN Command Protocol 10 ID Configuration 0xFF N W 5 N/A 0x02 = Write Byte 1: Group ID (Range 0x01-0x FF) Byte 2: Multi ID (Range 0x01-0x FF) 5 Byte 1: Group ID (Range 0x01-0xFF) Byte 2: Multi ID (R ange 0x01-0xFF) Command: 02 FF 05 01 04 02 01 04 03 Response: 02 FF 05 01 04 02 01 04 ED 03 N/A Inp ut Sou rc e DisplayP ort 0 xD1 N W ...

  • Planar LAN Command Potocol - page 14

    PS5580 RS232 and LAN Command Protocol 11 Inp ut Sou rc e HDMI 2 with Mu lti Sc ale 0xD3 N W 7 N/A 0x02 = Write Byte 1: Number of Horizon tal Monito rs Byte 2: Number of Ver t ic al M o n i t o r s Byte 3: Unused Byte 4: Unused 7 Byte 1: Number of Horizontal Mo nitors Byte 2: Number of Vertical Monitors Byte 3: Un used Byte 4: Un used H Monitors = 5 ...

  • Planar LAN Command Potocol - page 15

    PS5580 RS232 and LAN Command Protocol 12 IR Lock Configuration 0xB2 Y W 4 3 0x02 = Write Byte 1: IR Lock - 0x00 = Lock disabled - 0x01 = Lock enable d 4 Byte 1: IR Lock - 0x00 = Lock disabled - 0x01 = Lock enabled IR Lock = Enabled: Command : 02 B2 04 01 04 02 01 03 Response: 02 B2 04 01 04 02 01 3F 0 3 IR Lock = Enabled: Command: 02 B2 03 00 00 01 ...

  • Planar LAN Command Potocol - page 16

    PS5580 RS232 and LAN Command Protocol 13 OSD V Position 0x7 F Y W 4 3 0x02 = Write Byte 1: V Position (Range 0x00 -0x64) 4 Byte 1: V Position (Range 0x00-0x64) Write 5 0 ( 0x3 2) : Command: 02 7F 04 01 04 02 32 03 Response: 02 7F 04 01 04 02 32 41 03 Write 50 (0 x32 ): Command: 02 7F 03 00 00 32 03 Powe r O ff 0x 1 1 Y RW 3 2 0x00 = Read 0x02 = Wri ...

  • Planar LAN Command Potocol - page 17

    PS5580 RS232 and LAN Command Protocol 14 Scre en V P osit ion 0x37 Y W 4 3 0x02 = Write Byte 1: V Position (Range 0x00 -0x64) 4 Byte 1: V Position (Range 0x00-0x64) Write 5 0 ( 0x3 2) : Command : 02 37 04 01 04 02 32 03 Response: 02 37 0 4 01 04 02 32 89 03 Write 50 (0 x32 ) Command: 02 37 03 00 00 32 03 Seria l Co nt rol (LAN Off ) 0x71 Y W 3 2 0x ...

  • Planar LAN Command Potocol - page 18

    PS5580 RS232 and LAN Command Protocol 15 White Balance Contro l: Blue O ffse t 0xC2 N W 5 N/A 0x02 = Write Byte 1: Input Source - 0x01 = DisplayPort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byte 2: Blue O ffset (Range 0x00 -0x64) 5 Byte 1: In put Sourc e 0x01 = DisplayPort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byt ...

  • Planar LAN Command Potocol - page 19

    PS5580 RS232 and LAN Command Protocol 16 White Balance Contro l: Red Gai n 0xBC N W 5 N/A 0x02 = Write Byte 1: Input Source - 0x01 = DisplayPort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byte 2: Red Gain (Range 0x00 -0x64) 5 Byte 1: In put Sourc e - 0x01 = DisplayP ort - 0x02 = HDMI 1 - 0x03 = HDMI 2 - 0x04 = DVI - 0x05 = PC Byte 2: ...

  • Planar LAN Command Potocol - page 20

    PS5580 RS232 and LAN Command Protocol 17 Notes for C ommands T able Note # Note T ext 1 The response is f ollowed b y a response in the same format as the IP address r esponse, including the IP address c ommand byte . 2 See table below for Response val ues. (Cl ick he re fo r t abl e) 3 Byte 2: Value is in seconds. 4 Byte 6: Value is in seconds. 0x ...

  • Planar LAN Command Potocol - page 21

    PS5580 RS232 and LAN Command Protocol 18 The follo wing table lists the val ues for the Resolution data byte in the Get L CD Status response. Get L CD Status Response Resolution Value Resolution V alue Resolution V alue 640 x 480 @ 60H z 0 (0x00) 720P @ 50H z 29 (0x1D) 1360 x 768 @ 60Hz 25 (0x19) 640 x 480 @ 85H z 1 (0x01) 576P @ 50H z 30 (0x1E) 64 ...

Manufacturer Planar Category Planer

Documents that we receive from a manufacturer of a Planar LAN Command Potocol can be divided into several groups. They are, among others:
- Planar technical drawings
- LAN Command Potocol manuals
- Planar product data sheets
- information booklets
- or energy labels Planar LAN Command Potocol
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planar LAN Command Potocol.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planar LAN Command Potocol, service manual, brief instructions and user manuals Planar LAN Command Potocol. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planar LAN Command Potocol.

Similar manuals

A complete manual for the device Planar LAN Command Potocol, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planar LAN Command Potocol by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planar LAN Command Potocol.

A complete Planar manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planar LAN Command Potocol - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planar LAN Command Potocol, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planar LAN Command Potocol, that we can find in the current document
3. Tips how to use the basic functions of the device Planar LAN Command Potocol - which should help us in our first steps of using Planar LAN Command Potocol
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planar LAN Command Potocol
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planar LAN Command Potocol in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planar LAN Command Potocol?

Use the form below

If you did not solve your problem by using a manual Planar LAN Command Potocol, ask a question using the form below. If a user had a similar problem with Planar LAN Command Potocol it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)