English dropdown-ico

Manual Canon JX510P

98 pages 2.74 mb
Download

Go to site of 98

Summary
  • Canon JX510P - page 1

    ENGLISH User ’ s Guide T able of Contents Introduction 2 Before Using Y our Machine 10 Copying 22 Sending Faxes 23 Receiving Faxes 32 Using T AM Mode (JX510P only) 42 Printing from Y our Computer 53 Settings and Activity Reports 55 Routine Maintenance 62 T roubleshooting 72 Specificat ions 92 ...

  • Canon JX510P - page 2

    ENGLISH This equipment conforms with the essentia l requirements of EC Directive 1999/5/EC. (For Europe Only) European Union ( and EEA) only . These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/ 66/EC) and/or your national laws implem ...

  • Canon JX510P - page 3

    1 ENGLISH Model Name K10334 (JX510P/JX210P) About Consumables Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has stopped. International ENERGY ST AR ® Program Depending on your application program, oper ations ma y differ . For details, refer to the instruction manual of your application. The steps described i ...

  • Canon JX510P - page 4

    2 Introduction ENGLISH Introduction Useful Information z Replacing a FINE Cartrid ge When the ink in the FINE Cartridge starts to run out, the machine will switch to memory reception of faxes. z One-touch and Coded Dial Numbers Y ou can registe r One-touch and Coded Dial numbers in your fax machine to make sending faxes easier and faster . z Differ ...

  • Canon JX510P - page 5

    3 Introduction ENGLISH Reading the Do cument ation This guide provides detailed information on how to set up, o perate, maintain, and troubleshoot your fax. Please read the list below to become familiar with the symbols, terms, and abbreviations u sed in this guide. Wa r n i n g Indicate s a warning conce rning operati ons that may le ad to death o ...

  • Canon JX510P - page 6

    4 Introduction ENGLISH Safety Precautions Please read the safety warnings and cautions prov ided in this manual to ensure that you use the machine safely . Do not attempt to use the mach ine in any way not described in th is manual. Wa r n i n g z This produc t emits low level magne tic flux. If yo u use a cardiac pacemaker and feel ab normalities, ...

  • Canon JX510P - page 7

    5 Introduction ENGLISH Caution Y ou may cause injury or damage the machine if you ignore any of these safety pr ecautions. Legal Limit ations It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhau stive. When in doub t, check with a legal represe ntative in your jurisdictio ...

  • Canon JX510P - page 8

    6 Introduction ENGLISH How to Use the Document ation Provided Prep aring the Machine Be sure to read your setup sheet first for setti ng up your machine a nd getting it ready for use. Unpack the machine Please confirm the included item s against the il lustration printed on the lid of the packing box. 1 Connect the telephone line and the power cord ...

  • Canon JX510P - page 9

    7 Introduction ENGLISH 2 T urn on the machine . 3 Prepare the FINE Cartridge. 4 Install the FINE Cartridge. Select the receive mode according to your needs. See “D ifferent ways to receive a document” on page 32. z Receiving both documents and telephone calls automatically: <Fax/T el Mode>/<NET SWITCH>* z Receiving documents manuall ...

  • Canon JX510P - page 10

    8 Introduction ENGLISH  Selecting the Language for the LCD If an unintended language is displayed on the LC D , change it into your desired language following the procedure below . 1 Press [Menu]. 2 Press [ } ] once, then press [S tart/Copy]. 3 Press [ } ] five times, then press [S tart/Copy]. 4 Press [ } ] twice, then press [S tart/Copy]. The c ...

  • Canon JX510P - page 11

    9 Introduction ENGLISH Inst alling the Printer Driver Notes on the Installation Process z Quit all running applications before installation. z Log into a user account with the administrator pr ivilege. z Do not switch users during the installation process. z If the Found New Hardware or Found New Hardware Wizard screen appears automatically , remov ...

  • Canon JX510P - page 12

    10 Before Using Your Machine ENGLISH Before Using Y our Machine Main Component s an d Their Functions (1) Document Cover (2) Paper Support (3) Rear T ray (4) ADF (5) Document Guide (6) Paper Guide (7) Handset (8) Operation Panel (9) Cover (10) Holder (1 1) External Device Jack (12) T elephone Line Jack (13) USB Port (14) Handset Jack (15) Power Cor ...

  • Canon JX510P - page 13

    11 Before Using Your Machine ENGLISH  Operation Panel (1) [Maintenance] (see page 62) (2) [ON] (see page 12) (3) [Receive Mode/Resolution] (see page 22, p age 24, page 33) (4) [Menu] (see page 14) (5) Ink Lamp (see page 62) (6) [Caller History] (see page 27) (7) LCD (Liquid Crystal Display) (8) [Coded] (see page 18) (9) [ ] [ ] (see page 46) (10 ...

  • Canon JX510P - page 14

    12 Before Using Your Machine ENGLISH T urning the Machine ON and O FF T urn on the machine before using .  T urning on the Machine Before turning on the machine, confirm that the FIN E Cartridge is set into place. 1 T o turn on the machine, press [ON]. [ON] flashes green for a while, and the n turns on.  T urning off the Machine 1 T o turn of ...

  • Canon JX510P - page 15

    13 Before Using Your Machine ENGLISH Guidelines for Entering Numbers, Letters, and Symbols When you come to a step that requires you to enter a name or number , see the table below to determine which numeric button to press for the letter you want. z Entering Numbers, Lett ers, and Symbols 1 Press [ ] to switch between th e letter and number mode. ...

  • Canon JX510P - page 16

    14 Before Using Your Machine ENGLISH z T o delete a character: (1) Use [ [ ] or [ ] ] to move the cursor under the incorrect letter . Then press [Sp ace]. z T o delete an entire entry: (1) Press [Clear]. 3 Continue entering other l etters or numbers using the numeric buttons. 4 When you have finished entering characters , press [S tart/Copy] to reg ...

  • Canon JX510P - page 17

    15 Before Using Your Machine ENGLISH Registering Sender Information Y ou can registe r sender information (Transmit T erminal Identification (TTI)) in your machine so that your name, your fax/telephone number , and the date and time of transmissi on are printed in small type at the top of each page to be received. Thus , whenever you send a fax fro ...

  • Canon JX510P - page 18

    16 Before Using Your Machine ENGLISH  Registering Y our Fax/T elephone Number and Name This information appears at the top of each document you send. 1 Press [Menu]. 2 Use [ { ] or [ } ] to scroll through the menus and select <DA T A REGST RA T ION>, then press [S tart/Copy] twice. The LCD displays <DA TE & TIME>. 3 Use [ { ] or ...

  • Canon JX510P - page 19

    17 Before Using Your Machine ENGLISH 7 Use [ { ] or [ } ] to select the month in which th e summer time starts, then press [S tart/Copy] twice. The LCD displays <LAST WEEK>. 8 Use [ { ] or [ } ] to select the week in which the summer time st arts, then press [S tart/Copy] twice. The LCD displa ys <SUNDA Y>. 9 Use [ { ] or [ } ] to selec ...

  • Canon JX510P - page 20

    18 Before Using Your Machine ENGLISH 5 Enter the party’s number (up to 60 digits *) using the numeric buttons, then press [S tart/Copy] twice. * The values may differ depending on the country/region of use. 6 Enter the party’s name (up to 16 letters) using the numeric buttons, then press [S tart/Copy] to register the name (see page 13 ). 7 T o ...

  • Canon JX510P - page 21

    19 Before Using Your Machine ENGLISH 5 Enter the party’s number and name the same way you registered th em for one- touch speed diali ng. See steps 5 to 6, “Registering One-touch Speed Dialing Numbers and Names” on page 17. 6 T o assign additional coded speed dia lin g numbers, repeat from step 4. T o finish, press [S top/Reset]. Document Req ...

  • Canon JX510P - page 22

    20 Before Using Your Machine ENGLISH  Problem Document s z T o prevent document jams in the ADF , do not attempt to load the following types of documents into the fax: z Remove all staples, paper clips, etc. before loading the document into the ADF . z Make sure any glue, ink, or correction f luid on the paper is completely dry before loading th ...

  • Canon JX510P - page 23

    21 Before Using Your Machine ENGLISH Loading Document s and Paper 1 Open the Document Cover (1) and exten d the Paper Support (2) to support the paper . 2 Squeeze, then slide th e Paper Guide to the left . 3 Insert the stack face up in to the Rear Tray (1), and align the right edge of the stack with the right side of the Rear T ray . Then slide the ...

  • Canon JX510P - page 24

    22 Copying ENGLISH Copying Making Copies One of the convenient features of the fax is its ability to make high quality copies. Y ou can make up to 99 copies of one document at a time. If you make copies of multiple documents at a time, t he number of pages the fax can scan into memory is as follows: 1 Load the document face up into the ADF . See ? ...

  • Canon JX510P - page 25

    23 Sending Faxes ENGLISH Sending Faxes Sending Document s Before you send a document, see “Document R equirements” on p age 19, and “Loading Documents and Paper” on page 21.  Direct Sending 1 Load the document face up into the ADF . See “Loading Documents and Paper” on page 21. Y ou can set the scanning resolu tion and contrast (see ...

  • Canon JX510P - page 26

    24 Sending Faxes ENGLISH 3 If a person answers, converse normally , then ask them to press the start button on their fax. Press [S tart/Copy] and hang up. If you hear a high pitch tone, press [St art/Copy] and hang up.  Canceling Sending 1 Press [S top/Reset].  Adjusting the Quality of Y our Documents z Setting the Scanning Resoluti on Resolu ...

  • Canon JX510P - page 27

    25 Sending Faxes ENGLISH 3 Use [ { ] or [ } ] to select <SCAN CONTRAST>, then press [S tart/Copy]. The LCD displays <ST ANDARD>. 4 Use [ { ] or [ } ] to adjust the scanning contrast, then press [S tart/Copy]. Y ou can select <ST ANDARD>, <DARKER> or <LIGH TER>. 5 Press [S top/Reset]. Setting ends and the fax returns to ...

  • Canon JX510P - page 28

    26 Sending Faxes ENGLISH  Sending a Document Using Direct ory Dialing This feature is convenient when yo u know the ot her party’s name but cannot recall the one-touch speed dialing button or the code for coded speed dialing where t he number is registered. This procedure can also be used to look up the other party’s name and retrieve the nu ...

  • Canon JX510P - page 29

    27 Sending Faxes ENGLISH S pecial Dialing  Sending a Documen t Using Caller History If the <CALLER ID> setting is set to <ON>, the ca ller ’s name and phone/fax number appear on the LCD when you receive a call (see page 60). The fax keeps up to 20 latest caller IDs in memory . 1 Press [Caller History ], then wait for 2 seconds or p ...

  • Canon JX510P - page 30

    28 Sending Faxes ENGLISH Redialing When the Line is Busy There are two methods of redialing: manual rediali ng and automa tic redialing. This section explains these two methods.  Manual Redialing Press [Redial] to dial the last number you dialed wi th the numeric buttons*. (This starts redialing regardless of whether automatic redia ling is enab ...

  • Canon JX510P - page 31

    29 Sending Faxes ENGLISH 4 Use [ { ] or [ } ] to select <AUTO REDIAL>, then press [S tart/Cop y]. The LCD displays <ON>. z T o disable automatic redialing, use [ { ] or [ } ] to select <OFF>, then press [S tart/Copy]. Press [S to p/Reset] to return to standby mode. z T o enable automatic redialing, use [ { ] or [ } ] to select < ...

  • Canon JX510P - page 32

    30 Sending Faxes ENGLISH 8 Press [S tart/Copy]. z Press [S tart/Cop y] when using directory dialing . z The fax scans the document into memory . 9 The fax will automatically dial at the programmed time .  Sending Other Document s While the Fax is Set for Delayed Sending Y ou can send, receive, a nd copy other document s even when the fax is set ...

  • Canon JX510P - page 33

    31 Sending Faxes ENGLISH Sequential Broadcasting  Sending a Document to More Tha n One Location Sequential broadcasting sends o ne document to more than one location. Y ou can send to a total of 1 10 locations ( 70 locations for the JX210P model) as follow s: Y ou can enter the one- touch speed dialing and c oded speed dialing locations in any o ...

  • Canon JX510P - page 34

    32 Receiving Faxes ENGLISH Receiving Faxes Different ways to receive a document Y our fax provides you with several modes for receiving documents. T o determine which mode best suits your requirements, see the t able below . * This setting is only avai lable for some countries. <Fax/T el Mode>/<NET SWITCH>* Automatically switches betwee ...

  • Canon JX510P - page 35

    33 Receiving Faxes ENGLISH Setting the Receive Mode Once you have decided which mode is suitable fo r your needs, set the mode by pressing [Receive Mode/Resolution]. 1 Press [Receive Mode/Resolution]. Every time you press [Receive Mode/Re solution], the mode changes cyclically .  Receiving Faxes: <F AX ONL Y MODE>  Receiving Both Docume ...

  • Canon JX510P - page 36

    34 Receiving Faxes ENGLISH 8 Use [ { ] or [ } ] to select <RECEIVE> or <DISCO NNECT>, then press [St art/Copy]. This setting tells the fax what to do if the H andset is not picked up wi thin the specified ring time set in step 6. 9 Press [S top/Reset]. Setting ends and the fax returns to standby mode.  Receiving Document s Manually: ...

  • Canon JX510P - page 37

    35 Receiving Faxes ENGLISH Canceling Receiving 1 Press [S top/Reset]. T elstra FaxS tream Duet (Australia only) T elstra offers the FaxS tream Duet capability . If you subscribe to this service, your line is assigned two numbers: one for fax and one for phone. When t he fax number is called, the network sends a specific ringing tone which your fax ...

  • Canon JX510P - page 38

    36 Receiving Faxes ENGLISH T elecom FaxAbility (New Zealand only) T elecom N.Z. offers the FaxAbility capability . If yo u subscribe to this servic e, your line is assigned two numbers: one for fax and one for phone. When t he fax number is called, the network sends a specific ringing tone which your fax recognizes and automatically handles as a fa ...

  • Canon JX510P - page 39

    37 Receiving Faxes ENGLISH  Receiving to Memory T emporarily Y ou can enable/disable memory receivin g feature temporarily by selecting <AUTO PRINT> when [Menu] is pressed. 1 Press [Menu]. 2 Use [ { ] or [ } ] to select <DA T A REGSTRA TIO N>, then press [S tart/Copy]. 3 Use [ { ] or [ } ] to select <PRINT ER SETTINGS>, then pr ...

  • Canon JX510P - page 40

    38 Receiving Faxes ENGLISH  Polling to Receive Documents The polling feature allows you to request a doc ument to be faxed t o you from another fax machine. The sending party only needs to make sure the document is on a fax machine and ready to be sent. Thus, when your fax polls t he other fax mach ine, the document is sent automatically . The f ...

  • Canon JX510P - page 41

    39 Receiving Faxes ENGLISH 6 Use [ { ] or [ } ] to select the type of <CALL REJECTION> setting (JX510P only) you want, then press [St art/Copy]. Y ou can select from the followin gs: z <ANONYMOUS>: The fax rejects calls from any callers who have blocked their phone/fax number from the caller ID service. z <SELECTIVE>: The fax reje ...

  • Canon JX510P - page 42

    40 Receiving Faxes ENGLISH Documents S tor ed in Memory  Printing the MEMOR Y LIST Y our fax can print a list of documents stored in memory , along with the t ransaction number (<TX/ RX NO.>) of each document. On ce you know t he transaction nu mber of a document in memory , you can print it or delete it. 1 Press [Menu]. 2 Use [ { ] or [ } ...

  • Canon JX510P - page 43

    41 Receiving Faxes ENGLISH  Deleting a Docume nt from Memory 1 Press [Menu]. 2 Use [ { ] or [ } ] to select <MEMORY REFERENC E>, then press [S tart/Copy]. 3 Use [ { ] or [ } ] to select <DELETE DOCUMENT>, then press [S tart/Copy]. 4 Use [ { ] or [ } ] to select the transaction num ber (<TX/RX NO.>) of the document you want to d ...

  • Canon JX510P - page 44

    42 Using TAM Mode (JX510P only) ENGLISH Using T AM Mode (JX510P only) Recording the Outgoing Message Before you use the built-in answering machine (T AM), you must record an outgoing message. Use the Handset on the fax to record you r outgoing message. Only one outgoing message, no longer than 20 seconds, can be recorded.  T ypes of Messages t h ...

  • Canon JX510P - page 45

    43 Using TAM Mode (JX510P only) ENGLISH 7 Hang up the Ha ndset and press [S top/Reset]. The fax returns to standby mode. Setting T AM Mode Setting T AM mode allows you to receive telephone me ssages (ICM) and f ax tr ansmissions while the fax is unattended. 1 Press [T AM] to set T AM mode . z When you set T AM mode, the T AM Lamp lights up and the ...

  • Canon JX510P - page 46

    44 Using TAM Mode (JX510P only) ENGLISH  Setting the Recording T ime for a T elephone Message 1 Press [Menu]. 2 Use [ { ] or [ } ] to select <DA T A REGSTRA TION> , then press [St art/Copy]. The LCD displays <USER SETTINGS>. 3 Use [ { ] or [ } ] to select <T AM SETTINGS>, then press [S tart/Copy] twice. The LCD displays <60 ...

  • Canon JX510P - page 47

    45 Using TAM Mode (JX510P only) ENGLISH  Setting <TOLL SA VER> Setting <TOLL SA VER> allows you to check wheth er you have any new messages when you call from a remote location. When <TOLL SA VER> is set to <ON> and there are new messages, the fax will answer after the second rin g. If there are no new messages the fax wi ...

  • Canon JX510P - page 48

    46 Using TAM Mode (JX510P only) ENGLISH 7 Hang up the Ha ndset and press [S top/Reset]. The fax returns to standby mode. * The recording time for a voice memo can be set to the same settings as the recording time for a telephone message. However , if you set 0 as the recording time for each telephone message, voice memo recordin g time will be set ...

  • Canon JX510P - page 49

    47 Using TAM Mode (JX510P only) ENGLISH Follow the procedures below to delete all messages. 1 Press [Delete] . The LCD displays <YE S=( ) NO=(#)>. 2 Press [ ] to delete all mess ages. z A voice memo is not deleted (see page 46). z If you decide not to delete all messages, press [#]. Remote Control Features Use these features when you call hom ...

  • Canon JX510P - page 50

    48 Using TAM Mode (JX510P only) ENGLISH  Using Remote Control 1 Call home. 2 The outgoi ng message wi ll be played. 3 Press [#] while the outgoing message is playing. Enter your password when you hear the beeps indicatin g that you should enter your password. When your password is accepted, you will hear a confirmation tone (a short serie s of b ...

  • Canon JX510P - page 51

    49 Using TAM Mode (JX510P only) ENGLISH z List of Remote Control Commands * Sub-commands are only valid while the command they are linked to is active. ** When no forwarding number has been set, ICM forwarding mode ca nnot be set. When T AM mode has not been set, entering this command activates T AM mode and IC M forwarding mode simultaneously . Co ...

  • Canon JX510P - page 52

    50 Using TAM Mode (JX510P only) ENGLISH Forwarding T elephone Messages This feature allows you to automatically forw ard telephone messages, recorded when the fax is set to T AM mode, to a registered forwarding number. Y ou can use remote control to access the forwarding number and listen to your telephone messages.  Setting the Forwarding Numbe ...

  • Canon JX510P - page 53

    51 Using TAM Mode (JX510P only) ENGLISH 6 Use the numeric buttons, or [ { ] or [ } ] to enter the redial interval, then press [S tart/ Copy]. 7 Press [S top/Reset]. Setting ends and the fax returns to standby mode.  Setting <PIN ENTR Y> If you set the <PIN ENTRY> setting to <ON>, you must enter a password to use the forwarding ...

  • Canon JX510P - page 54

    52 Using TAM Mode (JX510P only) ENGLISH Note z When forwar ding is not possible: Y ou can set the fax to redial the f orwarding numbe r a certa in number of ti mes at specified intervals whe n forwardin g is not possi ble, such as at times when the f orwarding numb er is busy or the phone i s unattended . If forwardin g is still not p ossible after ...

  • Canon JX510P - page 55

    53 Printing from Your Computer ENGLISH Printing from Y our Computer Printing from Y our Computer This section describes procedure for basic printing. 1 Create a document or open a fi le to print using an approp riate application software. 2 Select Print on the application software’s File menu. 3 Make sure that your machine’s name is selected in ...

  • Canon JX510P - page 56

    54 Printing from Your Computer ENGLISH Reading the On-screen Manual For detailed instructions on installing the On-screen Manual , refer to your setup sheet. Y ou can view the On-screen Manual in the following way: T o view the On-screen Manual , double-click the XXX On-screen Manual shortcut icon on the desktop, or click Start > All Programs (o ...

  • Canon JX510P - page 57

    55 Settings and Activity Reports ENGLISH Settings and Activity Report s Selecting a Menu The <USER SETTINGS>, <REPOR T SETTINGS>, <TX SETTINGS>, <RX SETTINGS>, <PRINTER SETTINGS>, <SYSTEM SETTINGS>, <T AM SETTINGS>*, and <CALLER ID> menus allow you to customize the way your fax works. Ea ch menu conta ...

  • Canon JX510P - page 58

    56 Settings and Activity Reports ENGLISH  USER SETTINGS  REPORT SETTINGS Name Description Se ttings DA TE & TIME Set the date and time (24-hour clock) using the numeric buttons. – UNIT TELEPHONE # Enter your fax number using the numeric buttons. – UNIT NAME This is the name that appears at the top of each fax page you send (see page 1 ...

  • Canon JX510P - page 59

    57 Settings and Activity Reports ENGLISH  TX SETTINGS  RX SETTINGS ACTIVITY REPORT Ena ble/disable automatic printing of the ACTIVITY REPORT. – AUTO PRINT When you set ON, your fax is set to print the ACTIVITY REPORT for every 20 transactions (sending and receiving). ON/OFF TX/RX SEP ARA TE Divide the activity management report into sent an ...

  • Canon JX510P - page 60

    58 Settings and Activity Reports ENGLISH  PRINTER SETTINGS  SYSTEM SETTINGS Name Description Se ttings RX REDUCTION Enable/disable reduction for received documents. ON/OFF REDUCE DIMENSION Select reduction in height only or bo th width and height. VERTICAL ONL Y/ HORIZ & VERTICAL P APER SIZE Select the size of the loaded fax paper . A4/L ...

  • Canon JX510P - page 61

    59 Settings and Activity Reports ENGLISH  T AM SETTINGS (JX510P only) DA YLGHT SA V TIME Enable/disable the summer time system. ON/OFF ST ART DA TE/TIME Set the beginning of the summer time period. – END DA TE/TIME Set the end of the summer time period. – MONTH: Set the beginning/end month. MARCH/APRIL/MA Y/ JUNE/JUL Y/AUGUST/ SEPTEMBER/ OCT ...

  • Canon JX510P - page 62

    60 Settings and Activity Reports ENGLISH  CALLER ID Activity Report s Y our fax keeps track of most of its sending and receiving operations. T hese operations can be printed out in the form of activity reports t hat can help you check the dates and times of fax transmissions and whether or no t each transaction was successful.  How to Print a ...

  • Canon JX510P - page 63

    61 Settings and Activity Reports ENGLISH  ACTIVITY REPORT Summarizes the information for the sending and re ceiving activitie s of your fax after 20 transactions. For automatic printing, see <ACT IVITY REPORT> on p age 57. T ransactions in the ACTIVITY R EPORT are listed chronologically .  ONE-TOUCH SPEED DIAL TELEPHONE NO. LIST Lists t ...

  • Canon JX510P - page 64

    62 Routine Maintenance ENGLISH Routine Maintenance Maintenance Menus The table below shows the available main tenance menus when you press [Maintenance]. Replacing a FINE Cartridge If there is no improvement with the quality of prin ting following such maintenance as FINE Cartridge Cleaning, the FINE Cartridge is probably empty . R eplace the empty ...

  • Canon JX510P - page 65

    63 Routine Main tenance ENGLISH z Setting Automa tic Printing When the ink is low , yo u can set the receiving fax either automatic printing or stor ing in memory . 1 Press [Menu]. 2 Use [ { ] or [ } ] to select <DA T A REGSTRA TION> , then press [St art/Copy]. The LCD displays <USER SETTINGS>. 3 Use [ { ] or [ } ] to select <RX SETT ...

  • Canon JX510P - page 66

    64 Routine Maintenance ENGLISH However , the error detection function is disabled a f ter the error indication is canceled, therefore, Low Ink Warning message does not appear later on. When you install a new FINE Cartridge, the Low Ink Warning is enabled automatically .  Replacing a FINE Cartrid ge 1 Make sure the fax is turned on. 2 Open the Co ...

  • Canon JX510P - page 67

    65 Routine Main tenance ENGLISH 5 Insert the new FINE Cartridge. (1) Insert the new FINE Cartridge slightly slanted. (2) Push up the FINE Cartridge until it clicks into place. 6 Close the Cover . T esting and Cleaning the FINE Cartridge The print head in the FINE Cartridge contains nozzl es through which ink is propelled onto the paper . T o mainta ...

  • Canon JX510P - page 68

    66 Routine Maintenance ENGLISH 3 Use [ { ] or [ } ] to select <NOZZL E CHECK> , then press [S tart/Copy]. The fax prints the nozzle check pattern. 4 If the pattern is broken or missing (1), clean the FINE Cartridge print head (see page 66).  FINE Cartridge Cleaning If the pattern is broken or missing, clean the FINE Cartridge print hea d. ...

  • Canon JX510P - page 69

    67 Routine Main tenance ENGLISH 2 Use [ { ] or [ } ] to select <DEEP CLEANING> , then press [S tart/Copy]. Aligning the FINE Cartridge If ruled lines are printed misaligned or print result s are otherwise unsatisfactory , adjust the print head position.  Print Head Alignment 1 Make sure tha t the machine is turne d on, open the Do cument C ...

  • Canon JX510P - page 70

    68 Routine Maintenance ENGLISH (2) Repeat the procedure to input inputting the pattern number for columns B and C . (A) Less noticeable white streaks (B) More noticeable white streaks (3) When you have finished inputting all pattern numbers, the fax returns to standby mode. Cleaning Y our Machine Y our fax requir es little periodic maintenance. Thi ...

  • Canon JX510P - page 71

    69 Routine Main tenance ENGLISH 1 Open the Cover . 2 Use a clean, soft, dry , lint-free cloth to remove any ink or paper debris from the i nterior of the fax, especially around the four pinch rollers (A). Dirt and dust particles that collect on the underside of the Cover affect the quality of the documents you copy or send. Be careful not to touch ...

  • Canon JX510P - page 72

    70 Routine Maintenance ENGLISH  Cleaning the Roller Clean the paper feed roller if paper is not fed pr operly . Cleaning the paper feed roller will wear the roller , so per form this only when necessary . 1 Ensure that the machine is turned o n and there is no paper loaded in the Rear Tray . 2 Press [Maintenance]. 3 Use [ { ] or [ } ] to select ...

  • Canon JX510P - page 73

    71 Routine Main tenance ENGLISH  Cleaning the Protrusions In side the Machine If protrusions inside the machine are stained, wipe ink off the protrusions using a swab or something similar . Caution Always unplu g the machine fr om the power out let before cleaning th e machine. If you accidentally switch the ma chine on while cl eaning it, you c ...

  • Canon JX510P - page 74

    72 Troubleshooting ENGLISH T roubleshooting Paper Jams  Jams in the ADF When a document jams or misfeeds in the ADF , either both <OPEN COVER> and <SEE FIG . 1> or only <CHK PRINTER 5100>/<SEE MA NUAL> are displayed on the LCD. z When <OPEN COVER> and <SEE FIG . 1> are displaye d alternatively 1 Press [S top/R ...

  • Canon JX510P - page 75

    73 Troubleshooting ENGLISH 2 Open the Cover . 3 Gently remove the jammed paper inside the fax. 4 Press [S top/Reset]. The fax returns to standby mode. If the Power Disconnect s Unexpectedly The date and time setting on your device and al l documents stored in memory* will be kept. *All documents stored in memory will be deleted for the JX210P model ...

  • Canon JX510P - page 76

    74 Troubleshooting ENGLISH  Repeated Paper Jams Occur Faxing Problems z Sending Problems  Y ou Ca nnot Send a Documen t The Rear Tray may contain too many sheets. z Make sure the paper stack in the Rear T ray does not exceed the paper limit mark ( ) (see page 21). z Do not exceed the maximum loading capacity of the Rear Tray (see page 92). z ...

  • Canon JX510P - page 77

    75 Troubleshooting ENGLISH  Document s Sent From the Fax are S potted or Dirty  Cannot Send Using Error Correction Mode (ECM)  Errors Occur Frequently While Sending z Receiving Problems  Cannot Receive a Document Automatically  The Fax Does Not Switch Automatically Betwee n T elephone and Fax Reception Cause Action The receiving fax ...

  • Canon JX510P - page 78

    76 Troubleshooting ENGLISH  Cannot Receive a Document Manually  Print Quality is Poor  Fax Does No t Print The fax may have a document stored in memory . Print out any documents stored in memory (see page 40). An error may have occurred during reception. z Check the LCD for an error message (see page 85). z Print the ACTIVITY REPORT and ch ...

  • Canon JX510P - page 79

    77 Troubleshooting ENGLISH  Fax Images Print Blotched or Uneven  Cannot Receive Using Error Correct ion Mode (ECM)  Errors Occur Frequently While Receiving Copying Problems  The Fax Does Not Make a Copy  <MEMOR Y FULL> Appears on the LCD When Making Multiple Copie s Cause Action The telephone lines may be in poor condition, or ...

  • Canon JX510P - page 80

    78 Troubleshooting ENGLISH T elephone Problems  Y ou Cannot Dial  The Handset, T elephone, or Ex tension Phone Disconne cts While Y ou are T alking  There is Interferenc e on the Line Print Quality Problems  The Print Qualit y is Not What Y ou Expect; Print is Not Cl ear , is Splashed, has Miss ing Dots or White Streaks  The Printout ...

  • Canon JX510P - page 81

    79 Troubleshooting ENGLISH PC Printing Problems z If an Error Occurs When an error occurs in printing such as the ma chine is out of paper or paper is jammed, a troubleshooting message is displa yed automatically . T ake the appropr iate action described in the message. The message may vary depending on the version of your operating system. z Canno ...

  • Canon JX510P - page 82

    80 Troubleshooting ENGLISH z Cannot Connect to Compute r Properly  Printing or Scanning S peed Is Slow / Hi-Spee d USB Connection Does Not Work / “This device can perform faster” Message Is Displayed z Print Results Not Satisfacto ry If the print result is not satisfactory due to misaligned lines, confirm th e paper and print quality setting ...

  • Canon JX510P - page 83

    81 Troubleshooting ENGLISH  Lines Are Misaligned  Paper Is Smudged / Printed Surface Is Scratched Cause Action The paper and print quality settings are not set properly . Confirm the paper and print quality settings. See “Print Results Not Satisfactory” on page 80. Print Head is misaligned. If you did not align the Print Head after instal ...

  • Canon JX510P - page 84

    82 Troubleshooting ENGLISH  Back of the Paper Is Smudged z Machine Does Not St art or Stop s During Print Jobs  Printing Does Not S tart Cause Action The paper and print quality settings are not set properly . Confirm the paper and print quality settings. See “Print Results Not Satisfactory” on page 80. Inside of the machine is dirty . Pe ...

  • Canon JX510P - page 85

    83 Troubleshooting ENGLISH  Printing S top s Before It Is Comple ted  Printing Speed Not as Fast as Expected  Printer St atus Monitor Is Not Displaye d  The Inkjet Printer/Scanner/Fax Ext ended Survey Program Screen Is Displayed If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the confirmation screen asking to sen ...

  • Canon JX510P - page 86

    84 Troubleshooting ENGLISH Read the instructions on the screen and follow the procedure below. z If you agree to participate in the survey program: Click Agree , then follow the on-screen instructions. The machine usage information will be sent to Canon via the Internet. z If you do not agree to participate in the survey program: Click Do not agree ...

  • Canon JX510P - page 87

    85 Troubleshooting ENGLISH In Case of a Power Failure The user data settings and registered data for one-touch speed dialing and coded speed dialing are saved during a power failure. JX510P model: Faxes or messages stored in the memory are backed up automatically if the power is turned off or fails. If however , th e data cannot be retrieved when t ...

  • Canon JX510P - page 88

    86 Troubleshooting ENGLISH  BUSY/NO SIGNAL  CHECK DOCUMENT  CHECK P APER SIZE  CHK PRINTER 5100 / SEE MANUAL  CHK PRINTER 5B00 / REQUIRE SERVICE Cause Action The telephone number you dialed is busy . Try sending the document at a later time. The fax number dialed was incorrect. Check the fax number and dial again. The other party’s ...

  • Canon JX510P - page 89

    87 Troubleshooting ENGLISH  CHK PRINTER B200 / REQUIR E SERVICE  CHK PRINTER nnnn / SEE MANUAL  CLEAR P APER JAM  DOC. TOO LONG  ECM RX  ECM TX  INK ABS NEAR FUL  INK VOL UNKNOWN Cause Action An error requiring servicing might have occurred. If using the machine as phone, contact the service center, then turn of f the machin ...

  • Canon JX510P - page 90

    88 Troubleshooting ENGLISH  MEMOR Y FULL  NO INK  NO OGM  NO TEL #  REC’D IN MEMOR Y  RECOMEND NEW CR T  REMOVE DOCUMENT Cause Action The fax’s memory is full because it has received too many documents, or a very long or detailed document. Print and delete any documents stored in memory (see page 40). Then start again. The ...

  • Canon JX510P - page 91

    89 Troubleshooting ENGLISH  SET DOCUMENT IN CORRECT POSITION  T AM MEMORY FULL*  TX/RX CANCELLED  TX/RX NO. nnnn S t atus Monitor Messages The following messages are displayed on the status monitor when the machine is performing a function or encounters an error.  Service Error 5 100 Is Displayed Cause Action The document cannot be c ...

  • Canon JX510P - page 92

    90 Troubleshooting ENGLISH  Service Error B200 Is Displa yed  Service Error nnnn Is Displa yed  Writing Error / Output Error / Communication Error Cause Action An error requiring servicing might have occurred. If using the machine as phone, contact the service center, then turn of f the machine immediately . If not using as phone, turn off ...

  • Canon JX510P - page 93

    91 Troubleshooting ENGLISH  Other Error Mes sages The printer port is not configured appropriately . Follow the procedure below to check the status of the device. (1) Click Control Panel , Hardware and Sound , then Device Manager . If the User Account Control screen is displayed, follow the on-screen instructions. In Windows XP: Click Control Pa ...

  • Canon JX510P - page 94

    92 Specifications ENGLISH S pecifications S pe cifications are subjec t to change without notice. *1 Based on the Canon FAX S tandard Chart No.1, S tandard mode. *2 The number of pages may be reduced if many messages ar e stored in the T AM memory (JX510P only). *3 A computer that complies with Hi-Speed US B st andard is required. Since the Hi-Spee ...

  • Canon JX510P - page 95

    93 Specifications ENGLISH z Operation can only be guaranteed on a PC with Windows Vista, XP or 2000 pre-installed. z Some functions may not be available with Windows Media Center . z T o upgrade from Windows XP to Windows Vista, first uninstall sof tware bundled with the Canon printer . S pe cifications are subjec t to change without notice. Minimu ...

  • Canon JX510P - page 96

    ...

  • Canon JX510P - page 97

    ...

  • Canon JX510P - page 98

    User ’ s Guide Benutzerhandbuch Guide d’Utilisation Gebruikershandleiding Guía del Usuario Manuale dell’utente Guia do Usuário Οδηγός Λειτ ουργίας QT5-2230-V02 XXXXXXXX © CANON IN C.2009 PRINTED IN THAILAND The following FINE Cartridges are compatible with this machine. Die folgenden FINE-Patron en (FINE Cartrid ges) sind ...

Manufacturer Canon Category All in One Printer

Documents that we receive from a manufacturer of a Canon JX510P can be divided into several groups. They are, among others:
- Canon technical drawings
- JX510P manuals
- Canon product data sheets
- information booklets
- or energy labels Canon JX510P
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon JX510P.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon JX510P, service manual, brief instructions and user manuals Canon JX510P. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon JX510P.

Similar manuals

A complete manual for the device Canon JX510P, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon JX510P by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon JX510P.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon JX510P - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon JX510P, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon JX510P, that we can find in the current document
3. Tips how to use the basic functions of the device Canon JX510P - which should help us in our first steps of using Canon JX510P
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon JX510P
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon JX510P in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon JX510P?

Use the form below

If you did not solve your problem by using a manual Canon JX510P, ask a question using the form below. If a user had a similar problem with Canon JX510P it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)