Manual Canon 4412B002

23 pages 1.35 mb
Download

Go to site of 23

Summary
  • Canon 4412B002 - page 1

    EF300mm f/2.8L IS II USM EF400mm f/2.8L IS II USM Instructions ENG C OP Y ...

  • Canon 4412B002 - page 2

    ENG-1 Thank you for purchasing a Canon product. Canon’ s EF300mm f/2.8L IS II USM and EF400mm f/2.8L IS II USM are high-performance super- telephoto lenses, for use with EOS cameras. “IS” stands for Image Stabilizer .   “USM” stands for Ultrasonic Motor .   Features 1. The Image Stabilizer gives the equivalent effect of a shut ...

  • Canon 4412B002 - page 3

    ENG-2 Safety Precautions Safety Precautions Do not look at the sun or a bright light source   through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. Do not point the lens or camera at the sun or   photograph it. This is because the lens concentrates the ...

  • Canon 4412B002 - page 4

    ENG-3 This device complies with P ar t 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless ...

  • Canon 4412B002 - page 5

    ENG-4 Nomenc lature The il lustr atio ns used in the expl anat ions in thi s manu al sho w , wit h a fe w ex cepti ons , the EF30 0mm   f/2.8L IS II USM, but the EF400mm f/2.8L IS II USM is used in the same wa y . For detailed information, reference page numbers are provided in parentheses (   → **). Distance scale ( → 14) Orientati ...

  • Canon 4412B002 - page 6

    ENG-5 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced dust- and water-resistance. The rubber r ing may cause slight abrasions around the camera’ s lens mount, but this will not cause any problems. If the rubber r ing becomes wor n, it ...

  • Canon 4412B002 - page 7

    ENG-6 2. Setting the Focus Mode 3. Switc hing the Focusing Distance Rang e After autofocusing in ONE SHO T AF mode, focus manually by pressing the shutter button halfwa y and tur ning the focusing r ing. (Full-time manual focus) Lens Ranges EF300mm f/2.8L IS II USM FULL 2 m/6.6 ft. – 6 m/19.7 ft. 6 m/19.7 ft. – ∞ EF400mm f/2.8L IS II USM FULL ...

  • Canon 4412B002 - page 8

    ENG-7 4. AF Stop Button The AF stop function also works in AI Ser vo AF mode. Angle positioning of the AF stop button is adjustable by a Canon Ser vice Center at cost. With the EOS 630/600, RT , A2/A2E/5, or 10S/10   set to the AI Ser vo AF mode and continuous shooting, AF will not resume even after you let go of the AF stop button. Press the ...

  • Canon 4412B002 - page 9

    ENG-8 5. Focus Preset By presetting any focusing distance, you can instantly focus at that point ev en while you are shooting a different subject. This function operates in any of the AF , PF , and MF modes. < How to Set > Press the focus preset button. The focused distance will be   preset. If the focus preset switch was   set to ...

  • Canon 4412B002 - page 10

    ENG-9 Focus Preset When tur ning the playback ring, keep your finger   awa y from the shutter button. In One-Shot AF mode, the exposure will be locked when you press the shutter button halfway and focus is achiev ed. So if you press the shutter button halfwa y while tur ning the playback ring, the exposure may not be correct. When not using ...

  • Canon 4412B002 - page 11

    ENG-10 6. P ower Focus (PF) Mode Using the playback ring enables smooth focus change. This is a useful feature for changing focus when shooting movies. When the playbac k ring is rotated in a cer tain direction, f ocus changes in the same direction as when the focusing r ing is rotated. Y ou can make a 2-step change in focus shift speed depending o ...

  • Canon 4412B002 - page 12

    ENG-11 7. Image Stabiliz er Y ou can use the image stabilizer in AF , PF , or MF mode. Set the ST ABILIZER switch to ON. If you are not going to use the   image stabilizer function, set the switch to OFF . Select the stabilizer mode. MODE 1: Corrects vibrations in   all directions. It is mainly effectiv e for shooting still subjects. MO ...

  • Canon 4412B002 - page 13

    ENG-12 8. Tips on Using the Image Stabiliz er In semi-dar kened areas such as indoors or   outdoors at night. In locations where flash photograph y is   prohibited, such as ar t museums and theater stages. In situations where your footing is uncer tain.   In situations where fast shutter settings   cannot be used. When pann ...

  • Canon 4412B002 - page 14

    ENG-13 Tips on Using the Image Stabilizer The Image Stabilizer cannot compensate for a   blurred shot caused by a subject that mov ed. Set the ST ABILIZER switch to OFF when you   are taking pictures using the Bulb setting (long exposures). If the ST ABILIZER switch is set to ON, the image stabilizer function may introduce errors. The I ...

  • Canon 4412B002 - page 15

    ENG-14 10. Hood The special hoods that come with all these lenses cut out unwanted light and protect the front of the lens from rain, snow , and dust. T o attach the hood, loosen the hood lock knob by tur ning it counterclockwise. Fit the hood onto the lens’s hood mount, and tighten the lock knob to fix it in place. Use the same procedure, in re ...

  • Canon 4412B002 - page 16

    ENG-15 11. Fitting the Lens Cap With the lock knob at the opening in the cap, close the fastener to fix the cap in place as shown. Can also be attached to the   front of the hood when using the lens. Lift the hook and loop fastener , and fit the cap so that the lock knob r ides up the slot in the cap. Rev erse the lens hood, slip it over th ...

  • Canon 4412B002 - page 17

    ENG-16 12. Case Put the lens awa y as follows . Rev erse the lens hood, slip it over the lens, and attach the lens cap. Position the tripod mount towards you as shown and place it in the case. Place so that the hood’s lock knob rests in the slot near you. K eyhole Strap Slot Lid Hinge Lev er Fold the strap and fit it into the space near the case ...

  • Canon 4412B002 - page 18

    ENG-17 13. Using the T ripod Mount A tr ipod or monopod attaches to the tripod mount on the lens. Adjusting the T ripod Mount By loosening the orientation locking knob on the tripod mount you can rotate the camera to set the image for any vertical or horizontal position. Replacing the T ripod Mount (EF400mm f/2.8L IS II USM only) Replacement with t ...

  • Canon 4412B002 - page 19

    ENG-18 15. Dr op-In Filters A 52(WII)-ser ies drop-in gelatin filter holder with a glass filter is included with the lens. The drop- in filter holder can be used fitted with a gelatin filter (sold separately). 14mm 14mm 47mm 47mm <Installing and Removing> T o remov e the drop-in filter, press in the left and r ight lock buttons and pull ...

  • Canon 4412B002 - page 20

    ENG-19 16. Extenders (Sold Separatel y) Lens specifications when using extender EF1.4× II/III or EF2× II/III are as follows . EF300mm f/2.8L IS II USM EF400mm f/2.8L IS II USM EF1.4× II/III EF2× II/III EF1.4× II/III EF2× II/III Focal length (mm) 420 600 560 800 Aper ture f/4 – 45 f/5.6 – 64 f/4 – 45 f/5.6 – 64 Angle of view Diagonal ...

  • Canon 4412B002 - page 21

    ENG-20 17. Extension T ubes (Sold Separately) Y ou can attach extension tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below . EF300mm f/2.8L IS II USM EF400mm f/2.8L IS II USM MF mode is recommended for accurate focusing. Focusing Distance Range (mm) Magnification (×) Close distance Long distance ...

  • Canon 4412B002 - page 22

    ENG-21 Specifications The le ns lengt h is measu red from the mount surf ace to the front end of the lens . Add 26. 5 mm   when including the lens cap and dust cap. The size and weight listed are for the lens only , except as indicated.   The Close-up Lenses 250D and 500D cannot be attached.   Aper ture settings are specified on ...

  • Canon 4412B002 - page 23

    CT1-8570-004 1208SZ © CANON INC. 2011 C OP Y ...

Manufacturer Canon Category Camera Accessories

Documents that we receive from a manufacturer of a Canon 4412B002 can be divided into several groups. They are, among others:
- Canon technical drawings
- 4412B002 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon 4412B002
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon 4412B002.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon 4412B002, service manual, brief instructions and user manuals Canon 4412B002. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon 4412B002.

Similar manuals

A complete manual for the device Canon 4412B002, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon 4412B002 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon 4412B002.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon 4412B002 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon 4412B002, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon 4412B002, that we can find in the current document
3. Tips how to use the basic functions of the device Canon 4412B002 - which should help us in our first steps of using Canon 4412B002
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon 4412B002
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon 4412B002 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon 4412B002?

Use the form below

If you did not solve your problem by using a manual Canon 4412B002, ask a question using the form below. If a user had a similar problem with Canon 4412B002 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)