English dropdown-ico

Manual ResMed vpap-st

15 pages 0.46 mb
Download

Go to site of 15

Summary
  • ResMed vpap-st - page 1

    Making quality of care easy Respiratory Care Solutions Welcome Guide English VP AP ™ S T- A NONINV ASIVE VENTILA TOR ...

  • ResMed vpap-st - page 2

    Making quality of care easy Respiratory Care Solutions ...

  • ResMed vpap-st - page 3

    Welcome Thank y ou for c hoosing the VP AP ST -A. Bef ore operating the device, please read the entire W elcome and Information Guides. VP AP ST -A at a glance The VP AP ST -A system comprises the f ollowing elements: • VP AP S T -A device • Air tubing • 90W pow er supply unit • S9 T ravel bag • SD card • S9 SD card protective f older . ...

  • ResMed vpap-st - page 4

    Setting up 1. Connect the DC plug of the pow er supply unit to the rear of the device. 2. Connect the pow er cord to the power supply unit. 3. Plug the other end of the pow er cord into the power outlet. 4. Connect one end of the air tubing firmly onto the air outlet. 5. Connect the assembled mask system to the free end of the air t ubing . Notes: ...

  • ResMed vpap-st - page 5

    VP AP ST -A basics The control panel of y our device includes an LCD screen as well as a Start/Stop button, P ush dial, Alarm mute but ton, Info and Set up menu ke ys. Info menu Allows you to view your sleep statistics or exit from the menu. Setup menu Allows you to make changes to settings or exit from the menu. Start/Stop button Starts or stops t ...

  • ResMed vpap-st - page 6

    Adjusting r amp time Designed to make the beginning of treatment more comf ort able, ramp time is the period during whic h the pressure increases from a low start pressure to the treatment pressure. T o adjust y our ramp time: Using Mask Fit Y ou can use Mask Fit to help you fit y our mask properly . This f eature deliv ers CP AP pressure for a thr ...

  • ResMed vpap-st - page 7

    Selecting the mask type T o select your type of mask: 1. Press . The SETTINGS screen is display ed. 2. T urn until Mask is display ed in blue. 3. Press . The selection is highlighted in orange. 4. T urn until the mask set ting that you require is display ed. 5. Press to confirm your c hoice. 6. Push to return to the HOME screen. S9 Essentials S9 Es ...

  • ResMed vpap-st - page 8

    Getting star ted 1. Make sure the po wer is connected. 2. Adjust the ramp time or humidification le vel if required. 3. Fit your mask as described in y our mask user guide. 4. T o st art therapy , simply breathe into the mask and/or press . 5. Lie down and arrange the air t ubing so that it is free to move if y ou turn in y our sleep. 6. T o stop t ...

  • ResMed vpap-st - page 9

    Viewing the tr eatment screens Depending on how the sy stem has been configured, you will see one of the follo wing example screens (shown in S T mode) once therapy has started: 9 H5i humidifier 9 H5i humidifier 9 ClimateLine or ClimateLine MAX 9 Climate Control – A uto 9 H5i humidifier 9 ClimateLine or ClimateLine MAX 9 Climate Control – Manua ...

  • ResMed vpap-st - page 10

    T o toggle bet ween the treatment screens, press from your HOME screen. 9 T reatment with device trigger (Timed) and cycle (Timed, Ti Max or Ti Min) breath indicators 9 T reatment with spont aneous trigger and cycled breaths 9 T reatment with alarm functionality Viewing the Info menu The Inf o menu has a series of screens showing your sleep quality ...

  • ResMed vpap-st - page 11

    Viewing alar ms The VP AP ST -A is fit ted with an alarm module that continuously monitors both therapy and device conditions. Alarms are only activ ated when therapy is running. An alarm condition is indicated b y an audible sound, a flashing yello w alarm LED and a message on the screen. When the device is t urned on, the yello w alarm LED will f ...

  • ResMed vpap-st - page 12

    Cleaning and maintenance Y ou should regularly carr y out cleaning and maintenance as described in this section. Ref er to your mask and humidifier user guides f or det ailed instructions regarding the care of these devices. Daily Remo ve the air tubing b y pulling on the finger grips on the cuff . Hang it in a clean, dr y place until next use. Not ...

  • ResMed vpap-st - page 13

    SD card An SD card has been supplied to gather therapy data from your de vice and provide set tings updates from your clinician. When instructed to do so, disconnect the device from the pow er outlet, remove y our SD card, insert it in the protective folder and send it to y our clinician. Removing the car d 1. Push in the SD card to release it. 2. ...

  • ResMed vpap-st - page 14

    Making quality of care easy Respiratory Care Solutions ...

  • ResMed vpap-st - page 15

    Gl oba l le ad er s in sl ee p an d re sp ira tor y m ed ic in e ww w .resme d.com Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX144RY UK. See www .resmed.com for other Re ...

Manufacturer ResMed Category Ventilation Hood

Documents that we receive from a manufacturer of a ResMed vpap-st can be divided into several groups. They are, among others:
- ResMed technical drawings
- vpap-st manuals
- ResMed product data sheets
- information booklets
- or energy labels ResMed vpap-st
All of them are important, but the most important information from the point of view of use of the device are in the user manual ResMed vpap-st.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ResMed vpap-st, service manual, brief instructions and user manuals ResMed vpap-st. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ResMed vpap-st.

Similar manuals

A complete manual for the device ResMed vpap-st, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ResMed vpap-st by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ResMed vpap-st.

A complete ResMed manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ResMed vpap-st - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ResMed vpap-st, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ResMed vpap-st, that we can find in the current document
3. Tips how to use the basic functions of the device ResMed vpap-st - which should help us in our first steps of using ResMed vpap-st
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ResMed vpap-st
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ResMed vpap-st in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ResMed vpap-st?

Use the form below

If you did not solve your problem by using a manual ResMed vpap-st, ask a question using the form below. If a user had a similar problem with ResMed vpap-st it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)