Manual Bose CC-16

20 pages 1.4 mb
Download

Go to site of 20

Summary
  • Bose CC-16 - page 1

    ControlSpace ® CC-16 Zone Controller Safety Instructions & Install Guide ...

  • Bose CC-16 - page 2

    2 For the intended audience This guide has been written for professional installers of sound systems. 1. Read these instructions – for all components before using this product. 2. Keep these instructions – for future reference. 3. Heed all warnings – on the product and in the installer’s guide. 4. Follow all instructions. 5. Do not use this ...

  • Bose CC-16 - page 3

    3 Information about products that generate electrical noise This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses, an ...

  • Bose CC-16 - page 4

    4 Caution Check local regulations before installing the ControlSpace ® CC-16 zone controller. The building code may require professional installation by a skilled technician or licensed contractor. Regional electrical codes may require similar qualifications for wiring the system. This product must be used with a Class 2 power supply. Please read ...

  • Bose CC-16 - page 5

    5 The Bose ® ControlSpace ® CC-16 zone controller is an elegant wall-mounted device designed to provide end-user control of ControlSpace systems. Custom programming allows the CC-16 to control a variety of the system elements, from switching audio sources to selecting “scenes” or system configurations. The CC-16 features a bitmap LCD and four ...

  • Bose CC-16 - page 6

    6 Quick start 1. Run power and network (2-wire) cables from the ESP-88 to the CC-16 mounting location and install a mounting box. 2. Set the DIP switches to define the unit address and termination (see silkscreen on back of CC-16). 3. Connect the power and network wires to the CC-16’s terminal block and insert unit into the mounting box. 4. At th ...

  • Bose CC-16 - page 7

    7 Installation Cabling The CC-16 zone controller requires power and network cables. In some cases, these can be supplied over the same multi-conductor cable. When multiple CC-16s are used, run the network (and optionally the power cable) from the ESP-88 to each zone controller in a daisy chain. You can also run multiple home runs from the ESP-88 to ...

  • Bose CC-16 - page 8

    8 Installing the mounting box Install a dual-gang electrical box for each CC-16. Install the wall box so that it is flush or just below the surface of the finished wall. The unit is designed to fit in North American, Japanese, Australian and some European dual-gang electrical boxes. Mount the European and Australian double-gang boxes horizontally a ...

  • Bose CC-16 - page 9

    9 The CC-16 zone controller has an 8-position DIP switch located on the back of the unit. The DIP switches control addressing and termination settings. DIP switch addresses Up to fifteen CC-16s can be connected to an ESP-88 and each must have a unique address. Use the DIP switches numbered 4, 5, 6 and 7 on the back of the unit to set the address ? ...

  • Bose CC-16 - page 10

    10 DIP Switch Settings Termination The CC-16 zone controller uses a 2-wire RS-485 network to communicate with the ESP-88 sound processor. For optimum performance, the RS-485 network must be “terminated.” The C C-16 includes built-in termination resistors which make it easy to terminate the network. Termination is accomplished by setting DIP swi ...

  • Bose CC-16 - page 11

    11 Connecting the wires The CC-16 zone controller uses a standard 6-wire Eurostyle terminal block for power and network connections. 1. Connect the network cable to the RS-485 A/B pins on the ESP-88. Note which wire is connected to A and B. 2. Connect the network cable to the CC-16 terminal blocks. Ensure the wire connected to “A” on the ESP-88 ...

  • Bose CC-16 - page 12

    12 Wiring Power supply The CC-16 zone controller requires a minimum of 100mA at 8VDC. For convenience and consistency, we recommend you place the power supply in an equipment area adjacent to the network connection. Power can be supplied over the network cable, from a power supply local to the unit, or from a remotely-located power supply with a se ...

  • Bose CC-16 - page 13

    13 Mounting the CC-16 zone controller Warning: The CC-16 must be installed in a National Electric Code (NEC) approved, enclosed electrical wall box. After setting the DIP switches and connecting the wires, mount the CC-16 zone controller in the electrical box. Two sets of screws are provided. Use the screws that are appropriate for your wall-box ? ...

  • Bose CC-16 - page 14

    14 • Ensure that the power supply is wired correctly and plugged in • Try disconnecting other CC-16s if sharing a supply • Verify that the supply is DC and provides a minimum 100mA at 8V • Press a button to see if backlight comes on (the backlight turns off after a period of inactivity) • Check to see if the device is connected to an ESP- ...

  • Bose CC-16 - page 15

    15 Specifications Input voltage 8 - 18VDC, 100mA Max network cable length 2000 feet (609m) Number of CC-16 zone controllers per ESP-88 Sound Pr ocessor 15 Dimensions ...

  • Bose CC-16 - page 16

    16 W arranty Bose ® Product Sales Conditions Limited Warranty Policy and Conditions of Sale Bose Corporation The Mountain, Framingham, MA 01701 What is covered: All parts defective in material and workmanship. This limited warranty for the Bose ® ControlSpace ® CC-16 Zone Controller covers the functionality of the system for its normal, intended ...

  • Bose CC-16 - page 17

    17 Other Rights: EXCLUSIVE REMEDY: THIS LIMITED WARRANTY IS FULLY TRANSFERABLE PROVIDED THAT THE CURRENT OWNER FURNISHES THE ORIGINAL PROOF OF PURCHASE FROM AN AUTHORIZED BOSE DEALER. THE MAXIMUM LIABILITY OF BOSE SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. IN NO EVENT SHALL BOSE BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQ ...

  • Bose CC-16 - page 18

    18 ...

  • Bose CC-16 - page 19

    19 ...

  • Bose CC-16 - page 20

    20 ©200 7 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 285042 AM Rev .0 1 ...

Manufacturer Bose Category Video Game Sound System

Documents that we receive from a manufacturer of a Bose CC-16 can be divided into several groups. They are, among others:
- Bose technical drawings
- CC-16 manuals
- Bose product data sheets
- information booklets
- or energy labels Bose CC-16
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bose CC-16.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bose CC-16, service manual, brief instructions and user manuals Bose CC-16. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bose CC-16.

A complete manual for the device Bose CC-16, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bose CC-16 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bose CC-16.

A complete Bose manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bose CC-16 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bose CC-16, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bose CC-16, that we can find in the current document
3. Tips how to use the basic functions of the device Bose CC-16 - which should help us in our first steps of using Bose CC-16
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bose CC-16
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bose CC-16 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bose CC-16?

Use the form below

If you did not solve your problem by using a manual Bose CC-16, ask a question using the form below. If a user had a similar problem with Bose CC-16 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)