Manual Teac D-01

16 pages 0.42 mb
Download

Go to site of 16

Summary
  • Teac D-01 - page 1

    Monaural D/A Converter for Super Audio CD and CD Owner ’ s Manual D - 01 ...

  • Teac D-01 - page 2

    2 CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN ...

  • Teac D-01 - page 3

    3 Contents Thank you for choosing Esoteric. Read this manual carefully to get the best performance from this unit. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 i.LINK (IEEE 1394) . . . . . . . . . . . . . . ...

  • Teac D-01 - page 4

    4 Features The world’ s first* mono D/A converter that realizes the full potential of the Super Audio CD format (* as of August, 2004) Our approach of “improvement in sound quality through discrete L/R channel transmissions” has evolved into a completely discrete L/R system having two D-01s, one handling the left channel, and the other the ri ...

  • Teac D-01 - page 5

    5 i.LINK (IEEE 1394) The i.LINK format, also known as IEEE 1394, is an international specification for the transferring of extremely fast data. This unit is ready for i.LINK (AUDIO). By connecting an i.LINK (AUDIO)-capable device to the IEEE 1394 (or i.LINK AUDIO) terminal on this unit using an i.LINK cable, you can transmit Super Audio CD multi-ch ...

  • Teac D-01 - page 6

    WORD SYNC OUT Amplifier D-01 (FRONT L channel) SACD/CD Drive Unit (P-01) D-01 (other than FRONT L channel) or a Clock Generator (G-0/G-0s) AUDIO IN (FRONT L) Connect either cable. Connect either cable. XLR pin assignment D E C C A A B B 6 Connections CAUTION: < Switch off the power to all equipment before making connections. < Read the instru ...

  • Teac D-01 - page 7

    7 Digital audio input terminals Connect any one of these terminals to the digital output terminal of a digital device (P-01, etc.) using a commercially available cable. XLR: Use balanced XLR digital audio cable COAXIAL: Use RCA (pin) digital audio cable IEEE1394 / i.LINK (AUDIO): Use S400 compatible IEEE1394 6pin cable < The IEEE 1394 terminal, ...

  • Teac D-01 - page 8

    8 AUDIO IN (FRONT L) Amplifier AUDIO IN (FRONT R) Amplifier D-01 (FRONT L) D-01 (FRONT R) G-0/G-0s P-01 XLR digital cable BNC coaxial cable XLR cable XLR cable Example: Connection to the P-01 and the G-0/G-0s ...

  • Teac D-01 - page 9

    9 Names of Each Control 1 POWER Use this button to turn the unit on or off. When the unit is on, the ring surrounding the button lights up. A C B A D F E Display The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. WORD Use this button to switch between word sync modes. A mode indicator light ...

  • Teac D-01 - page 10

    10 OUTPUT This button allows you to adjust the output level in 0.5 dB steps between –99.5 and +6 dB. You can also set the level to – ∞ . When using this feature, switch off the VOLUME BYPASS. VOLUME BYPASS Pressing and holding this button for more than 3 seconds switches the Volume Bypass on and off. On By-passes the volume (output level) cir ...

  • Teac D-01 - page 11

    11 First Thing T o Do Before anything else, you must select a channel for this unit when you use it for the first time or when you have reset it back to factory settings. Press the POWER button to turn the unit on. 1 When the unit is on, the ring surrounding the button lights up. “CH_SEL>” appears on the left side of the display. On the righ ...

  • Teac D-01 - page 12

    12 Changing the Settings Press and hold the FILTER button for more than 3 seconds. 1 The unit enters the setup mode, and “W_OUT>***” appears on the display. (*** changes depending on the setting.) The setup mode will be cancelled in the following instances • Leave the unit idle for 8 seconds. • Press and hold the FILTER button for more t ...

  • Teac D-01 - page 13

    13 W_OUT (Wor d sync output frequency) Select the frequency of the word sync signal. The factory setting is “44.1k”. < The word sync signal is output only when the WORD button is set to “OUT”. (“P” means “4% down mode for PAL film”) CH_SEL (Channel Select) Select the channel for this unit. < The icon of the selected channel li ...

  • Teac D-01 - page 14

    14 T roubleshooting If you experience any problems with this unit, please take the time to look through this chart. You may be able to solve the problem yourself before calling your dealer or technical support. No power e Check the connection to the AC power source. Check and make sure the AC source is not a switched outlet and that, if it is, the ...

  • Teac D-01 - page 15

    15 Specifications General Power supply Europe model . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz U.S.A./Canada model. . . . . . . . . . . . . . . . AC 120 V, 60 Hz Korea model . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 W Weight . . . . . . . . ...

  • Teac D-01 - page 16

    16 Block Diagram D/A (+) D/A (+) D/A (+) D/A (+) D/A ( - ) D/A ( - ) D/A ( - ) D/A ( - ) I/V I/V I/V I/V Digital Audio Interface Receiver ES-LINK Decoder DSD q PCM Converter RDOT Digital Filter FIR Digital Filter Master Clock X'tal Word Clock Divider PLL RAM LINK RCA WORD OUT WORD IN XLR1 XLR2 IEEE1394 Interface IEEE1394 IEEE1394 Highspeed Iso ...

Manufacturer Teac Category Power Supply

Documents that we receive from a manufacturer of a Teac D-01 can be divided into several groups. They are, among others:
- Teac technical drawings
- D-01 manuals
- Teac product data sheets
- information booklets
- or energy labels Teac D-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teac D-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teac D-01, service manual, brief instructions and user manuals Teac D-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teac D-01.

Similar manuals

A complete manual for the device Teac D-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teac D-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teac D-01.

A complete Teac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teac D-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teac D-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teac D-01, that we can find in the current document
3. Tips how to use the basic functions of the device Teac D-01 - which should help us in our first steps of using Teac D-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teac D-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teac D-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teac D-01?

Use the form below

If you did not solve your problem by using a manual Teac D-01, ask a question using the form below. If a user had a similar problem with Teac D-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)