English dropdown-ico

Manual Lucent Technologies AP-3

406 pages 3.43 mb
Download

Go to site of 406

Summary
  • Lucent Technologies AP-3 - page 1

    APS (Application Plus Server) 4.1 Users Guide 101-1830-001 Issue 1.0 Ju ne 19 99 ...

  • Lucent Technologies AP-3 - page 2

    Copyright  1999, Lucent T echnologies All Rights Reserv ed, Printed in U.S.A. Notice Every e ffort was made to ensure that the in formation in this book wa s com p le te an d ac curat e at th e t ime of p r in ting. Howe v e r , in f ormat ion is subjec t to ch ange. Y our Responsibility f or Y our System ’ s Security T oll frau d is the una u ...

  • Lucent Technologies AP-3 - page 3

    101-1830 -001 Issue 1.0 iii 101-1830 -001 Issue 1.0 About This Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Audience S tatement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Purpose Stat ement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Help and T echnical ...

  • Lucent Technologies AP-3 - page 4

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide iv 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Passive Alarm Monitoring Inter face . . . . . . . . . . . . 32 System Heartb eat . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Communication Pr otocols. . . . . . . . . . . . . . . . . . . . . . . . . . . 34 OCL V ersions. . . . . . . ...

  • Lucent Technologies AP-3 - page 5

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide v 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Installi ng the APS T a pe . . . . . . . . . . . . . . . . . . . . . . . . . 5 0 Installi ng the ERP T a pe . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Installi ng the Application . . . . . . . . . . . . . . . . . . . . . . . . 54 Config ...

  • Lucent Technologies AP-3 - page 6

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide vi 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Script M enu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 New , Open, and Delete Items . . . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies AP-3 - page 7

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide vii 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Printer Conf iguration . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 System Performanc e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Cron T asks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ...

  • Lucent Technologies AP-3 - page 8

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide viii 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Stopping a Script in T est Mode . . . . . . . . . . . . . . . . 128 Monitori ng a Script Session. . . . . . . . . . . . . . . . . . . 129 Monitori ng a Script with t he X.25 T race T ool . . . . . 129 Checking a n Application’ s Runtime Statu ...

  • Lucent Technologies AP-3 - page 9

    101-1830 -001 Issue 1.0 ix 101-1830 -001 Issue 1.0 Cron T asks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Starting a nd Stopping Cron T asks . . . . . . . . . . . . . . . 161 Modifying Cron T asks. . . . . . . . . . . . . . . . . . . . . . . . 161 Monitori ng Cron T ask Status . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies AP-3 - page 10

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide x 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 Escalate t he Problem . . . . . . . . . . . . . . . . . . . . . . . . 189 For Sites Tha t Use TCP/IP . . . . . . . . . . . . . . . . . . . . . . . 190 Check TCP/IP Physical Connecti vity . . . . . . . . . . . 190 From the Si erra/CA, Check TCP/IP ...

  • Lucent Technologies AP-3 - page 11

    101-1830 -001 Issue 1.0 xi 101-1830 -001 Issue 1.0 Restoring Onl y APS 4.1 Data . . . . . . . . . . . . . . . . . 216 Informix Software Backup and Rest ore . . . . . . . . . . . . . 217 Informix Database Backup and Restore . . . . . . . . . . . . . 217 Example Outp ut of a Databa se Restore . . . . . . . . . . 217 Example Output of install_ fs:full ...

  • Lucent Technologies AP-3 - page 12

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide xii 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 505001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 505002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 505005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258 50 ...

  • Lucent Technologies AP-3 - page 13

    101-1830 -001 Issue 1.0 xiii 101 -1830-001 Issue 1.0 600013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 600014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 600015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 600016 . . . . . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies AP-3 - page 14

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide xiv 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 EAP-related Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Interpret ing EAP Errors . . . . . . . . . . . . . . . . . . . . . . . . . 338 Resolving EAP-r elated Errors . . . . . . . . . . . . . . . . . . . . 343 TCAP ...

  • Lucent Technologies AP-3 - page 15

    101-1830 -001 Issue 1.0 xv 101 -1830-001 Issue 1.0 Developing Cus tom Reports . . . . . . . . . . . . . . . . . . . . . . . . . 377 Relinking wi th Logging Stub . . . . . . . . . . . . . . . . . . 377 Indexing on h r_int . . . . . . . . . . . . . . . . . . . . . . . . . . . 377 Glossary , Abbreviations, and Acronyms . . . . . . . . . . . . . . . . ...

  • Lucent Technologies AP-3 - page 16

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide xvi 101-183 0-001 Issu e 1.0 101-183 0-001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 17

    101-1830 -001 Issu e 1.0 17 About This Book This manual descr ibes the Applicati on Plus Serve r (APS) 4.1 so ftware platfo rm. Use this m anual with appl ications s uch as Inbound Call Com pletion (ICC) 1.1. Audience Statement This docu mentation is wr itten for the following audiences: This guid e is not int ended for prog rammers develop ing cus ...

  • Lucent Technologies AP-3 - page 18

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 18 101-1830 -001 Issu e 1.0 In gener al, the audie nce for this book should hav e the following experie nce and expert ise: n Sun syst em a dmi nistra tion n Beginning -level Sier ra and CA (Calle r Applicati ons) maintena nce knowl edge n X.25 network ing experien ce n TCP/IP networki ng expe rien ...

  • Lucent Technologies AP-3 - page 19

    101-1830 -001 Issu e 1.0 19 Help and T echnical Support Y ou can re ach Lucent Octe l Messaging Divi sion (OMD) by phone , fax, e-ma il, and the In ternet. For tel ephone assistanc e about APS soft ware: Call 408- 922-1822. This is the Lucent T echnologies OMD help line. Press 1 ( Sierra menu opt ion ) and the n 4 (Direct Su pport menu option) to n ...

  • Lucent Technologies AP-3 - page 20

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 20 101-1830 -001 Issu e 1.0 Conventions This book uses the foll owing conventions : n The term Sierra refer s to a Sierr a VPM (voice proc essing module ). n The term CA s tands for Caller Applicatio ns VPM and was formerl y known as IMA-CA ( Intelligent Mes saging Archite cture-Calle r Applicati o ...

  • Lucent Technologies AP-3 - page 21

    101-1830 -001 Issu e 1.0 21 Related Documents Electronic V ersion An elect ronic version of this document is located i nside the Luc ent fire wall i n Adob e Acr obat f ormat. Go to http:// info.dr .lucent.com/~ bfthomas/aps/APS.h tml Other Manuals In this manual, we may refer you to other documen ts. Y ou may want to locate them and have th em at ...

  • Lucent Technologies AP-3 - page 22

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 22 101-1830 -001 Issu e 1.0 Commenting on Thi s Document T o comment on th is manual, p lease direct c ommunication s to: Lucent T echnologies Octel Mess aging Divisi on MS C5-04 1001 Murphy Ra nch Road Milpita s, California 95035- 3912 email: o cteltechpub s@lucent.com telepho ne: 408-384-20 00 T ...

  • Lucent Technologies AP-3 - page 23

    101-1830 -001 Issu e 1.0 23 W izard is a copyright i f ISSG, Inc. x25too l is a trademar k of Sun Micro Syst ems, Inc. ...

  • Lucent Technologies AP-3 - page 24

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 24 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 25

    101-1830 -001 Issu e 1.0 25 1 Overview This chap ter provides a high-leve l descripti on of the APS 4.1 (Applica tion Plus Ser ver) environment , software, and hardware. Overvi ew of the APS Environmen t The A P S 4. 1 p latfo rm so ft ware is the b a se sof tware upon w hich other APS applic ation software r esides. Curr ently , the APS 4.1 platf ...

  • Lucent Technologies AP-3 - page 26

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 26 101-1830 -001 Issu e 1.0 n Disk arr ay - Sun A1000 disk ar ray or Disk array - Sun M ultiP ac k arra y n HSI card f or X.25 links, if X .25 pr otocol is used n LAN sw itch to conn ect th e ERP s ystem , APS s ystem , and Sierra /CAs Figure 1 shows an example o f hardware compo nents at an APS si ...

  • Lucent Technologies AP-3 - page 27

    Over view 101-1830 -001 Issu e 1.0 27 Software Constructs APS 4. 1 pla tf orm s o ftwar e uses th e foll owing softw a re con struc t s : n Function al wi za rds n Scripts n Profil es n Applicat ions n Cron task s n Sessions Figure 2 shows how softwar e constructs are used tog ether to for m an applica tion. Figure 2. APS Programm ing Constructs Sc ...

  • Lucent Technologies AP-3 - page 28

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 28 101-1830 -001 Issu e 1.0 APS 4.1 Environment The APS envir onment consis ts of: n 1 to 4 Sun s ystems running APS 4.1 and any APS application n 1 Sun syst em running ERP 2.0 ( optional) APS 4.1 APS is a Sun- based Servic e Creation Enviro nment (SCE) syst em. APS was creat ed to provide an infr ...

  • Lucent Technologies AP-3 - page 29

    Over view 101-1830 -001 Issu e 1.0 29 APS 4.1 New Features APS 4.1 i ntroduces the following ne w features: n Upgrade t o Informix 7.3 n TCP/IP int erface to Sier ra/CA providi ng 432 virtual circuits when using HLR n TCP /IP al arm func tiona lity n TCP/IP connect iv ity checks Upgrade to Info rmix 7. 3 APS 4 .1 platform sof tware uses Info rmix 7 ...

  • Lucent Technologies AP-3 - page 30

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 30 101-1830 -001 Issu e 1.0 ERP 2.0 New Features ERP 2.0 i ntroduces th e following ne w features: n Compatibili ty of ERP 2.0 with the APS 4.1 platform n ERP support of up to 4 APSs n Capabili ty to handle 2 milli on re cor ds per APS, 8 mi ll ion for one ERP Inclusion of ERP as a Custom Applicati ...

  • Lucent Technologies AP-3 - page 31

    Over view 101-1830 -001 Issu e 1.0 31 a. Installs the SS7 stack. b. Checks t hat th e SS7 li nks co me in to se rvice . c. Starts the issg_ss7al arm monitor . d. Starts the SS7 gateway . 8. Checks th at TCP/IP connec tivity is up, i f TCP/IP is bei ng used. 9. Starts the APS appl ication manager , whi ch start s any applic ation s that wer e runnin ...

  • Lucent Technologies AP-3 - page 32

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 32 101-1830 -001 Issu e 1.0 APS 4.0 Features The previ ous version of APS, APS 4.0, introduced th ese new features in its re lease in Jan uary of 1999: n NewNet card replaces M icroLegend inter face to HLR n Upgr ade to S olari s 2.6 n Software package improvement n Initi alization o n reboot n Pas ...

  • Lucent Technologies AP-3 - page 33

    Over view 101-1830 -001 Issu e 1.0 33 System Heartbeat The syste m heartbeat pr ovides a way t o continuousl y monitor the APS platfo rm. The system hea rtbeat is an in formational alarm, alarm 600000, that is logg ed in the statu s lo g file. This al arm i s logged every 15 mi nut es on the qua rter hour . If this alarm is not logged, it means tha ...

  • Lucent Technologies AP-3 - page 34

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 34 101-1830 -001 Issu e 1.0 Communication Pro tocol s The communica tion protoco ls supported by APS 4 .1 include: n For Sier ras, OCL version 1.2, VIS versions 1.2 and 2.0 n For CAs, OCL ver sion 1.2, VIS ver sion 2.0.05.08 n SMPP (Short me ssage peer -to-peer ) protocol n SS7, IS-41C, TCAP (HLR i ...

  • Lucent Technologies AP-3 - page 35

    Over view 101-1830 -001 Issu e 1.0 35 Figure 3. APS 4.1 Interfaces SMTP The e- mail interf ace pr ovide d via S MTP (S imp le Mai l T ransfer Proto col) is uncha nged in APS 4.1. TCP/IP Interf ace Communicati ons with external OSS (Operation al Systems Support ) systems u sing TCP/IP , mo dem, or X.25 interfa ces are uncha nged in APS 4.1. Communic ...

  • Lucent Technologies AP-3 - page 36

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 36 101-1830 -001 Issu e 1.0 Description of APS Hardware The APS hard ware pla tform consis ts of Sun s ystems for one or more APS machines a nd one Sun sy stem for the ERP ma chine. Please refer to the configur ation note f or this rel ease for more details, incl uding product ID numbers . APS Sun ...

  • Lucent Technologies AP-3 - page 37

    Over view 101-1830 -001 Issu e 1.0 37 Other Components in the APS Syste m n One fast -wide, 68-68 pi n SCSI cable wit h power cord n One exter nal modem, US Robotic s Sportster n RJ45 Ether net cable n If usin g X.25 links to t he Sierra/CA: — One high sp eed seria l interface ( HSI) pad to con nect to the Sierra /CA — X.25 cab le; 25 feet ; 1 ...

  • Lucent Technologies AP-3 - page 38

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 38 101-1830 -001 Issu e 1.0 Hardware Base for Small ERP Configurati on The small ERP configuration uses a Sun Ultr a Enterprise 5, Model 2 300, 300 MHz Server with: n Single CPU n 1 GB RAM n 2 MB Ultr a cache memory n Intern al Sun CD-ROM n 3.5 in ch 1.44 MB interna l diskette drive n One 9.1 GB Ul ...

  • Lucent Technologies AP-3 - page 39

    Over view 101-1830 -001 Issu e 1.0 39 Description of APS Software An APS site requires sof tware for the APS, provided by Luce nt T echnologies, and software for the Sierra/C A VPM . T o p rocess reports , an ERP machin e loaded with ERP software is nece ssary . APS Software APS uses th e following so ftware componen ts and provide s them as part o ...

  • Lucent Technologies AP-3 - page 40

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 40 101-1830 -001 Issu e 1.0 n Informix ESQL/C 9.16.UC1 n Sun W orkshop C/C++ co mpilers v 4. 2 VPM Software n Minimum of VIS 1 .2 software fo r Sierra voi ce processi ng systems n Minimum of VIS 2.05.08 software for CA voice proces sing systems n Support f or OCL versions 1.2 a nd 2.0 Licens e Info ...

  • Lucent Technologies AP-3 - page 41

    101-1830 -001 Issu e 1.0 41 2 Installing APS This chap ter contain s informat ion about ins talling th e APS 4.1 platfor m softw are a nd the S olari s 2.6 op erati ng sys tem. I nstal lation instr uctio ns found in this secti on discuss: n Getti ng St arted n Rout ine O p eratio ns n Required Items and I nformatio n n Instal ling New Hardware Syst ...

  • Lucent Technologies AP-3 - page 42

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 42 101-1830 -001 Issu e 1.0 a. Setting up X.2 5 connectivit y if applic able b. Setting up T ype 40 and T ype 1 mail boxes c. Adding a new li ne type to pro vide answer su pervision fo r RNA d. Setting up applicati on mailboxe s if necessary e. Setting up p ort monitori ng tables on t he Sierra/CA ...

  • Lucent Technologies AP-3 - page 43

    Inst alling A PS 101-1830 -001 Issu e 1.0 43 Required Items an d Information Pleas e ha ve th e foll owing items and i nform ation avai lable to co mplet e the instal lation proc edures. If you do not have the ot her informat ion, enter pl ace-holder data when you are pr ompted f or suc h th ings as IP addr ess an d lice nsing i nformat io n. Apply ...

  • Lucent Technologies AP-3 - page 44

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 44 101-1830 -001 Issu e 1.0 n Netmask for TCP/IP n Netmask for PPP n Modem, dia l-up line, and r emote access proc edures for r emote support personnel so the y may dial in t o the site ...

  • Lucent Technologies AP-3 - page 45

    Inst alling A PS 101-1830 -001 Issu e 1.0 45 Installing New Hardware Systems New systems require spec ific hardwar e to be install ed and wired. Onc e the hard ware is se t up, you are r eady to insta ll the soft ware. Assemb li ng the Sun Hardw are Assemble t he major hardware c omponents of the APS p latform: n APS hardware n ERP hardware , if us ...

  • Lucent Technologies AP-3 - page 46

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 46 101-1830 -001 Issu e 1.0 Inst allin g Ci rcuit Cards Check the Sun system to be loaded with APS to make sure that card s are in the co rrect slot s. Th e cor rect arra ngemen t of cards in the Sun system is shown in Fi gure 4 . Figure 4. Rear Pan el of the Sun Ultra 2 System Inst alli ng th e Se ...

  • Lucent Technologies AP-3 - page 47

    Inst alling A PS 101-1830 -001 Issu e 1.0 47 There sho uld be two disk s installe d. Figure 5 shows the ar rangement of disks i n the A1000 disk array . Install th e disks as sho wn. Figure 5. Arran gement of Drive s in the Sun A1000 Disk Array Powering Up the A1000 Use this procedure to power up the A1000 . The A1000, tap e drive, and Sun syste m ...

  • Lucent Technologies AP-3 - page 48

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 48 101-1830 -001 Issu e 1.0 3. Set your screen to ma tch Figure 6. Figure 6. Example Su n Admin T ool Window Assembling the ERP Hardware If you ha ve an ERP system at you r site, see ‘ ‘Assembl ing the ERP Hardware’’ o n page 352. Cabling the ERP Syste m If you ha ve an ERP system at you r ...

  • Lucent Technologies AP-3 - page 49

    Inst alling A PS 101-1830 -001 Issu e 1.0 49 5. Enter the IP address of the LAN switch. 6. Enter the IP address of the LAN default gateway . 7. E nter th e net m ask. 8. Connect t he local LAN to t he APS’ s LAN swit ch in slot 1 . Use the LAN cros sover cable (flipped). 9. F or /etc /hos ts pur p oses, name t he LA N swit ch “swa ps”. ...

  • Lucent Technologies AP-3 - page 50

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 50 101-1830 -001 Issu e 1.0 Instal ling the Software n Instal l the APS tape o n all APS syste ms. This tape in stalls the APS platf orm software on the Sun system. n Instal l the ERP tape o n the ERP Sun system if you have an ERP system at your site. This step is not n eeded if your system is not ...

  • Lucent Technologies AP-3 - page 51

    Inst alling A PS 101-1830 -001 Issu e 1.0 51 6. Choo se Utilities Command Tool 7. From the # p rompt, enter t ar xvf /dev/rmt/ 0 This command extracts th e scripts ne eded to load the software. 8. E nter ./ins tall__fs This command displays the following message s: n Date , time, a nd mac hine f rom wh ich th is tape w a s crea ted n Fil e s yst em ...

  • Lucent Technologies AP-3 - page 52

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 52 101-1830 -001 Issu e 1.0 17. Enter t he new machine name. Confi rm by enteri ng y . Y our netwo rk administr ator shou ld be abl e to provi de some of the informat ion regardi ng network addr essing used i n the next steps . 18. Enter t he IP address. C onfi rm by enterin g y . 19. Enter t he ne ...

  • Lucent Technologies AP-3 - page 53

    Inst alling A PS 101-1830 -001 Issu e 1.0 53 31. Enter t he Informix DBSer ver key number . This is available on the Informix software pack age. 32. Enter t he ESQL (embedded syste m query language ) serial number . This is available on the Informix software pack age. 33. Enter the ESQL k ey number . This is available on the Informix software pack ...

  • Lucent Technologies AP-3 - page 54

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 54 101-1830 -001 Issu e 1.0 Installi ng the ERP T ape If your sit e uses an ERP s ystem, s ee ‘ ‘Insta lling an d Adminis teri ng ERP’’ on page 354 . Installi ng the Applicat ion Every appl icat ion needs speci fic admi nistrat ion and s etup per formed. See the docume ntation that came wit ...

  • Lucent Technologies AP-3 - page 55

    Inst alling A PS 101-1830 -001 Issu e 1.0 55 If your site uses TCP/ IP protocol to t he Sierra/CA, p erform these two procedur es: n ‘ ‘Cabling an d Configuring TCP/I P from the Sier ra/CA Side’’ on page 55 n ‘ ‘Cabling an d Configuring TCP/I P from the APS Side ’’ on page 58 If your site uses an X.25 protocol to t he Sierra/CA pe r ...

  • Lucent Technologies AP-3 - page 56

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 56 101-1830 -001 Issu e 1.0 __________________________________________ _______________ Menu 21 - LAN Interfa ce Management IMA-CA 1 - IP Address and Net Mask Configura tion 2 - TCP/IP Parameter Configuration 3 - SNMP Parameter Configuration 4 - NAC Card API Status 5 - Add/Edit Host - IP Entries 6 - ...

  • Lucent Technologies AP-3 - page 57

    Inst alling A PS 101-1830 -001 Issu e 1.0 57 __________________________________________ ___________________________ Menu 21.2 - LAN Inter face Management IMA-CA - TCP/IP Parameter Co nfiguration - This Server’s Ethernet Address:......... 0 0:C0:94:20:0A:F9 This Server’s IP Address:............... 1 72.16.2.83 IP Net Mask:....................... ...

  • Lucent Technologies AP-3 - page 58

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 58 101-1830 -001 Issu e 1.0 Cabling and Configuring TCP/I P from the APS Side Using this procedure from the APS system, set up the TCP/IP connec tion. Perform t his procedure f or every APS syst em at the site. Perform t his procedur e after loadi ng the APS tape a nd after ins talling the ICC appl ...

  • Lucent Technologies AP-3 - page 59

    Inst alling A PS 101-1830 -001 Issu e 1.0 59 Figure 7. Sierra/CA Configuration fo r a Remotely L ocated Sierra/CA __________________________________________ __________________________________ Menu 18 - X.25 Interface Management MODEM CONNECTION - Interface Configurat ion - Physical Interface Number: 0 Network Type: 1 - Telnet Connection Type: 3 - N ...

  • Lucent Technologies AP-3 - page 60

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 60 101-1830 -001 Issu e 1.0 7. Connect t he SME (synchronous mode m eliminator) connector . The SME conne ctor is la beled VPS on on e end and Dat a M od on the othe r end. The VPS end po ints toward the A PS machine and the Data Mod end points t o the Sierra/ CA. Figure 9 shows the cable connectio ...

  • Lucent Technologies AP-3 - page 61

    Inst alling A PS 101-1830 -001 Issu e 1.0 61 Cabling and Configuring X.25 Links on the APS Side This sect ion outl in es the con figur ation procedur e for X.25 pr otocol stack. It cont ains detail ed step-by-ste p instructi ons along wit h screen exampl es showing co nfiguration settings. 1. Decide how ma ny links you will be configuring. Th e fir ...

  • Lucent Technologies AP-3 - page 62

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 62 101-1830 -001 Issu e 1.0 Starting the X.25 T ool 2. Log in as super user . Enter su and en ter the corr ect password . 3. Ente r x25to ol& The X.25 tool main menu displays , as shown in Fig ure 11 . Figure 1 1. X25tool 9 .1, Main Menu Note that the first li nk, link 0, has already been confi ...

  • Lucent Technologies AP-3 - page 63

    Inst alling A PS 101-1830 -001 Issu e 1.0 63 A list o f link types dis plays as shown in F igure 12. Figure 12. Link T ypes 5. Click on l ink type dte84 . An example Li nk Editor wind ow for an HSI conne ction displays as in Fi gure 13. A Link Editor win dow for a dire ct connectio n shows in Fi gure 14. ...

  • Lucent Technologies AP-3 - page 64

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 64 101-1830 -001 Issu e 1.0 Using the Link Editor Use the Li nk Editor to s et up the subs equent links . Figure 13 shows th e corr ect setti ngs f or t he sec ond link, link 1, of an HSI conne ction. Fi gure 14 shows the corr ect settin gs for the second l ink of a dire ct connectio n. Use T able ...

  • Lucent Technologies AP-3 - page 65

    Inst alling A PS 101-1830 -001 Issu e 1.0 65 Use F igure 14 to ente r sett ings f or a Si er ra/C A not in the sa me fac i lity as the APS sys tem. Figure 14. Link Edito r Window for a Re motely-located Sier r a/CA 6. When fi nished, clic k Apply . When you cli ck Apply , the buttons you need to u se on the right become avail abl e. In the ne xt st ...

  • Lucent Technologies AP-3 - page 66

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 66 101-1830 -001 Issu e 1.0 LAPB/W AN Parameters 7 . From the Li nk Edi tor wi ndow , choose LAPB/W AN Paramete rs . The LAPB/W AN Pa rameters window dis plays, as shown in Figure 15 . Figure 15. LAPB and W AN Pa rameters 8. Cli ck OK . This window needs no modificati ons. ...

  • Lucent Technologies AP-3 - page 67

    Inst alling A PS 101-1830 -001 Issu e 1.0 67 Addressing 9 . From the Li nk Editor windo w click Addressin g . 10. The Address ing Parameters wi ndow displays, as shown in Figure 16 . Figure 16. Addressing Parameters Wind ow 11. Cl i c k OK . This win dow needs no modif ications. ...

  • Lucent Technologies AP-3 - page 68

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 68 101-1830 -001 Issu e 1.0 CUG and Facili ties 12. From the Li nk Editor windo w , click C U G and Faci lities . The CUG (clos ed user group) an d Facilities wi ndow displays, as shown in Fi gure 1 7. Figure 17. CUG and Faci lities Parameters W indow 13. Click OK . This window needs no modi ficati ...

  • Lucent Technologies AP-3 - page 69

    Inst alling A PS 101-1830 -001 Issu e 1.0 69 Link Modes 14. From the Li nk Editor windo w , click Link M odes . The Link Mode Parameters window di splays, as sh own in Figure 18 . Figure 18. Link Mode Pa rameters Windo w 15. Click OK. This wi ndow needs no modif ication. ...

  • Lucent Technologies AP-3 - page 70

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 70 101-1830 -001 Issu e 1.0 Throughput 16. From th e Link Editor windo w , cl ick Throughput. The Through put window displ ays, as shown in Figure 19. Figure 19. Throughput Window 17. Change your screen to mat ch the values in Figure 19. 18. Click Appl y . 19. Click OK . ...

  • Lucent Technologies AP-3 - page 71

    Inst alling A PS 101-1830 -001 Issu e 1.0 71 Timer s and Counters 20. From th e Link Editor windo w , cl ick Timers and Cou nters . The T imers and Counters window d isplays, as in Fi gure 20. Figure 20. Timers and Counters Wind ow 21. Click OK . This win dow needs no modif ication. ...

  • Lucent Technologies AP-3 - page 72

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 72 101-1830 -001 Issu e 1.0 Special 22. From th e Link Editor , cli ck Special . The Specia l Parameters window displays , as in Figure 21. Figure 21. Special Param eters Window 23. Click OK . This window needs no modi fication. ...

  • Lucent Technologies AP-3 - page 73

    Inst alling A PS 101-1830 -001 Issu e 1.0 73 X32 Authenticati on 24. From the Li nk Editor , click X32 Authorization . The X32 Author ization win dow displays, as in Figure 22. Figure 22. Special Param eters Window 25. Click OK . This window needs no modi fication. 26. From the Li nk Editor , click OK t o leave the Li nk Editor windo w . ...

  • Lucent Technologies AP-3 - page 74

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 74 101-1830 -001 Issu e 1.0 Routing 27. From the X25 tool main menu choose Services Routing The Routin g Parameters window d isplays, as in Figur e 23. Figure 23. Routing Para meters Window 28. Click Add , a nd then click To p . 29. Change your screen to mat ch the values shown in Figure 23, except ...

  • Lucent Technologies AP-3 - page 75

    Inst alling A PS 101-1830 -001 Issu e 1.0 75 Y our new link has been corre ctly configure d, as shown in Figur e 24. Figure 24. New Link Configured Configur e the re st of t he X.25 lin ks at you r site. Repeat st eps 4 thr ough 30 to confi gure the res t of the li nks. ...

  • Lucent Technologies AP-3 - page 76

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 76 101-1830 -001 Issu e 1.0 Modifying the Profiles Open the APS i nterface to modi fy the profi les to use t he correct connecti vity . Modify prof iles to use a particular s erver or prot ocol. The profil es you must modify an d how to change t hem are specif ied in the applica tion’ s u sers gu ...

  • Lucent Technologies AP-3 - page 77

    Inst alling A PS 101-1830 -001 Issu e 1.0 77 Software Upgrade s The proce dures in this se ction upgrad e your APS system t o: n APS 4.1 n Inform ix 7.3 This sec tion does not upgrade the Sier ra/CA VPM (voice pr ocessing module) i n any way . Upgrading from APS 3.x to APS 4.1 Upgrading from APS 3.x to APS 4.1 i s a custom tas k. Upgrade teams from ...

  • Lucent Technologies AP-3 - page 78

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 78 101-1830 -001 Issu e 1.0 Figure 25 shows the di sks that occ upy them the Mu ltiPack disk ar ray . Instal l disks as s hown. Figure 25. Arrangement of Drives in the Mu ltiPack Disk Array Figure 26 shows the arran gement of dis ks i n t he A100 0 disk array . Instal l the di sks as show n. Figure ...

  • Lucent Technologies AP-3 - page 79

    Inst alling A PS 101-1830 -001 Issu e 1.0 79 Procedure to Upgrade to APS 4.1 Expect t his procedure to take about 2 hours. Use this procedure to upgrade your s ystem to APS 4.1. Upgrading from 4GB to 9GB Drive s If you a re moving to either inter nal or exte rnal 9 gigabyte hard drive s, do a full install at this point as described in ‘ ‘Instal ...

  • Lucent Technologies AP-3 - page 80

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 80 101-1830 -001 Issu e 1.0 5. Save any ot her applica tions that ma y be present o n the APS system t o tape. Alternat ively , at least ve rify that you can reins tall applica tions from the or iginal mediu m. 6. G ather the in fo rmat ion n ee ded b y the i nstal lation scrip ts set up phase: — ...

  • Lucent Technologies AP-3 - page 81

    Inst alling A PS 101-1830 -001 Issu e 1.0 81 18. Open a ter minal window by se lecting Program and t hen Terminal from th e Sun desktop. A # prompt di splays. 19. In a ter minal window enter cd /va r/rest ore_fi les ./infor mix_lic 20. Enter t he Informix DBSer ver serial number . This is available on the Informix software pack age. 21. Enter t he ...

  • Lucent Technologies AP-3 - page 82

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 82 101-1830 -001 Issu e 1.0 h. Another i nformation pop -up appears t hat indicat es license instal lation will proceed. Click t he OK button. i. Click on Ex it - Instal l Licenses . j. From a cmdtoo l window , run the lice nse configura tion script: cd /e tc/opt/licens es ./LIC_CONFIG_SCRIP T 25. ...

  • Lucent Technologies AP-3 - page 83

    101-1830 -001 Issu e 1.0 83 3 Menu Interface This chap ter descri bes the APS (Appli cation Plus Server) 4.1 menu interf ace. I t disc usses eac h menu and men u item. T o reference proced ures for usi ng the inter face to perf orm specific tasks, se e Chapter 4, ‘ ‘Procedure s.’’ Definitions The list below will f amiliarize you wi th the t ...

  • Lucent Technologies AP-3 - page 84

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 84 101-1830 -001 Issu e 1.0 APS Menu Interface The APS inte rface is a g raphical user i nterface t hat enables the programmer or system administ rator to op erate, adminis ter , maintain and provisi on the system. APS pl atfor m sof tware The s oftw ar e base all AP S appl icatio ns ru n upon. Fun ...

  • Lucent Technologies AP-3 - page 85

    Menu Inte rface 101-1830 -001 Issu e 1.0 85 Main Menu The APS inte rface conta ins five dro p-down menus: Figure 27 show s the GUI of the APS mai n menu. Figure 27. APS GUI, M ain Menu Menu Purpose Script Use thi s menu to develo p and manage script s. V iew Use this men u to view log fi les. Syst em Use this m e nu to Administer scripts Confi gu r ...

  • Lucent Technologies AP-3 - page 86

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 86 101-1830 -001 Issu e 1.0 Script Menu The scri pt menu contai ns items for p rogramming scri pts, deleti ng old script s, and printing s cripts. Figu re 28 shows the Script menu and its menu items. The foll owing list de scribes the purpose of each men u item. Figure 28. Script Menu New , Ope n, ...

  • Lucent Technologies AP-3 - page 87

    Menu Inte rface 101-1830 -001 Issu e 1.0 87 Print Use t he Pri nt item in the S crip t menu t o prin t scrip ts. A script is composed of a collecti on of functional wizards. Each func tiona l w izard acts a s a logi c al fun ction in the fl ow of the sc ri pt. T o examin e the logic flo w , exa mine the scri pt. Quit This it em closes the APS inter ...

  • Lucent Technologies AP-3 - page 88

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 88 101-1830 -001 Issu e 1.0 Vi e w M e n u The V ie w utilit y pro vi des in forma tion u seful for sy st em mai ntena nce, trouble shooting, and general stat us checks of the APS system. The foll owing list de scribes the purpose of each men u item. Figure 29 shows the ite ms available in the V ie ...

  • Lucent Technologies AP-3 - page 89

    Menu Inte rface 101-1830 -001 Issu e 1.0 89 Debug Log An applic ation is bui lt by connect ing one or more scripts. The functiona l wizards that comprise the scripts de termine the c all flow . The Debug log file pr ovides a trace of the call flow for appl ications. Script Information Log The Scrip t Information l og file contain s the comment li n ...

  • Lucent Technologies AP-3 - page 90

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 90 101-1830 -001 Issu e 1.0 System Menu The foll owin g list descr i bes the purpose of ea ch menu item in t he System menu. Figure 30 shows the Sy stem menu. Figure 30. Syste m Menu Menu Item P urpose Script Confi guration Run, tes t, cr ea te, save an d manage profiles and scr ipts Scripts Contro ...

  • Lucent Technologies AP-3 - page 91

    Menu Inte rface 101-1830 -001 Issu e 1.0 91 Script Configuration Use the menu item Script Configuratio n to delete, cre ate, rename, and manage profi les . Before yo u run an appli cation, each scr ipt that compris es it must have a t least o ne profile. The profile mus t correspond to the OCL configur ation of a sta ndalone Sier ra/CA or a Sierra ...

  • Lucent Technologies AP-3 - page 92

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 92 101-1830 -001 Issu e 1.0 Figure 31 shows a Prof ile window with al l server optio ns disabled. Figure 31. Example Script Profile Window Parts of the Profi le Window T able 4 descri bes each eleme nt in he Profil e window . Th is example discuss ed a current pro file, one tha t is already defi ne ...

  • Lucent Technologies AP-3 - page 93

    Menu Inte rface 101-1830 -001 Issu e 1.0 93 Network Por t Number Networ k port number bei ng used TCP / I P Ena ble Enab les T C P/IP p r otoco l to t h e Sier ra/CA t o be used Logger Host Name Name o f the hos t machine wh ere the l ogger is running Logger Port Number Port number of the ho st machine wh ere logger is runni ng Password Password u ...

  • Lucent Technologies AP-3 - page 94

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 94 101-1830 -001 Issu e 1.0 Server/Prot ocol Ena ble O ptions When assig ning a profil e to a scrip t, you must choos e one of the Server/ Protocol Enabl e buttons. What button you cho ose depends on t he script this profi le influences. For example, if the scri pt accesses an OSA server , c hoose ...

  • Lucent Technologies AP-3 - page 95

    Menu Inte rface 101-1830 -001 Issu e 1.0 95 TCP/IP Enable Option When selec ted, th e TCP /IP E nable optio n let s the a pplic ation use TCP/I P protocol instead of X.25. Fi gure 32 shows a profi le window with TCP/IP Enable selected and its options. Figure 32. Profile W indow with TCP/IP Enab le Chose If TCP/IP Enable is sel ected, the f ollowing ...

  • Lucent Technologies AP-3 - page 96

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 96 101-1830 -001 Issu e 1.0 SMPP Options The SMPP (Short Message Peer- to-Peer Protocol ) Enable opti on enables the scr ipt to open th e connection to specific cu stomer . Figure 33 shows an exa m ple of this prof ile with SMPP selected. Figure 33. Profile Windo w with SMPP Options When the SMPP E ...

  • Lucent Technologies AP-3 - page 97

    Menu Inte rface 101-1830 -001 Issu e 1.0 97 OSA Server Opti ons Choose thi s option if the script use s OSA (Octel Syst em Administration) server wizards. OSA as signs the foll owing parame ters: n OSA SER V ER HOSTNAME - Name of the host runnin g OSA ser ver . n OSA SER V ER POR T ID - Port numbe r for the OSA se rver . Figure 34 shows an example ...

  • Lucent Technologies AP-3 - page 98

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 98 101-1830 -001 Issu e 1.0 HLR Server Opti ons APS 4.1 doe s not support this Protoc ol/ Server Enabl e option becau se it no longer supports con nections to t he HLR through a Mic rolegend. ...

  • Lucent Technologies AP-3 - page 99

    Menu Inte rface 101-1830 -001 Issu e 1.0 99 SS7 Enable Opti ons Choose the SS7 Enable op tion when the scr ipt uses a NewNet ca rd and IS-41 mess age s. IS-41 messages sit o n th e SS7 prot ocol. F igure 35 sh ows the SS 7 Enable optio ns. The foll owing parameter s are assig ned by the SS7 pr otocol: n SS7 Proxy Domai n Path n SS7 Proxy Domai n Ho ...

  • Lucent Technologies AP-3 - page 100

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 100 101-1830 -001 Issu e 1.0 Disable O ption Use th e Disable opt ion for scri pts that use non e of the other Server/ Protoc ol e nable op tions . Figure 36 shows an example of a prof ile with no se rvers or pro tocols enabl ed. Note that n o additional options are availa ble with Disable chosen. ...

  • Lucent Technologies AP-3 - page 101

    Menu Inte rface 101-1830 -001 Issu e 1.0 101 Auto R e s ta r t Optio n Selecting Enabl e Auto Restart allows a scrip t to restar t automatica lly if the scr ipt terminat es inappropria tely . Disabling A uto Restart means t hat the scr ipt must be rest arted manuall y . T ype 40 Mailbox Number The T ype 40 mailbox number is administ ered on the Sie ...

  • Lucent Technologies AP-3 - page 102

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 102 101-1830 -001 Issu e 1.0 Buttons Once yo u have display ed the Profile wi ndow , use the buttons a t the bottom to manage the s cript. T able 6 describes the buttons at the botto m of the Pr ofile window . T o monitor your script sess ions expertl y , see ‘ ‘Monitorin g a Script Sessi on’ ...

  • Lucent Technologies AP-3 - page 103

    Menu Inte rface 101-1830 -001 Issu e 1.0 103 Scripts Control M anager The Scrip ts Control Mana ger lets you col lect script s and profiles into a list s o that you may st art and stop th em with one opera tion rather t han sepa rately . Use this m enu item to collec t script s and their profile s into a grou p, and to remove scr ipts and pro files ...

  • Lucent Technologies AP-3 - page 104

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 104 101-1830 -001 Issu e 1.0 Application Manager Use this menu item to : n Start t he applicat ion manager n Stop the application manager n Check the application manager runti me status to s ee what applica tions, scri pts, and profi les are run ning The appli cation manager moni tors applic ations ...

  • Lucent Technologies AP-3 - page 105

    Menu Inte rface 101-1830 -001 Issu e 1.0 105 In ord er to r each t he SS 7 gatew ay , APS ne eds th e foll owin g i nform atio n : n Link set number n STP (signa l transfer point) poin t code n Port s ettin g of the Ne wNe t c ard n Route setti ng inf orma ti on These dat a are config ured and defi ned in the aps. cfg SS7 configu ration file. Under ...

  • Lucent Technologies AP-3 - page 106

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 106 101-1830 -001 Issu e 1.0 Utility Menu The foll owing list de scribes the purpose of ea ch menu item. Figure 37 shows an exa m ple of the Uti lity menu. Figure 37. Utility Me nu Export Use this menu it em to copy script s to a diskette. The win dow in this menu item let s you type in a SunOS com ...

  • Lucent Technologies AP-3 - page 107

    Menu Inte rface 101-1830 -001 Issu e 1.0 107 Import Use thi s menu ite m to co py scripts fr om a diskette to the h ard dr iv e of the APS system. Wizard Ba ckup Use this menu item to copy APS files and d ata to a tar get per ipheral. Printer Con figuration The U t ility m enu of the AP S inte rface p r ovide s a pri nter c onfigu ratio n item to s ...

  • Lucent Technologies AP-3 - page 108

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 108 101-1830 -001 Issu e 1.0 Cron T asks This men u it em: n Starts and stops cro n tasks n Checks th e cron status n Enables y ou to edit th e cron table with vi Cron tas ks run i n the bac kground. Cro n tasks perform i mportant f unctions such as c reating log files for c all backup da ta. The C ...

  • Lucent Technologies AP-3 - page 109

    Menu Inte rface 101-1830 -001 Issu e 1.0 109 The lice nse certifica te that comes with the APS sof tware contains t hese data: n Expi ratio n time n Feature Set n License Ke y Application This me nu provides acces s to all the installed applicatio ns. This me nu contains a si de menu that li sts each appl ication lo aded on top of APS 4.1, al ong w ...

  • Lucent Technologies AP-3 - page 110

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 110 101-1830 -001 Issu e 1.0 Database Menu The foll owing list de scribes the purpose of ea ch menu item. The Databa se menu provides utilities t o manage databa se tables. Befor e using th ese items, the database must be open. The Data base menu is shown in Fi gure 4 0. This uti lity is not a r ep ...

  • Lucent Technologies AP-3 - page 111

    101-1830 -001 Issu e 1.0 111 4 Procedures This chapt er con tains freque ntl y us ed pr oce dures. Mater ia l i n th is sec tion is arra nged func ti onall y into the fo llowi n g cate gorie s: APS System-wide T asks 4-1 12 Applicati on-specific T asks 4-1 17 W o r king with S c ript s, Scri pt Groups, and App lications 4-1 18 W orking wit h Profil ...

  • Lucent Technologies AP-3 - page 112

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 112 101-1830 -001 Issu e 1.0 APS System-wide T asks Syst em-w id e tas ks affect the AP S 4. 1 syst em as a whole . Th is sect ion descri bes the foll owing system -wide tasks: Start ing the APS Interface Use this procedure to log in to the APS interf ace from a com mand window: 1. Log in to the Su ...

  • Lucent Technologies AP-3 - page 113

    Procedur es 101-1830 -001 Issu e 1.0 113 Note: Do not e xit that shel l or type a ny comm and in that shell. Exiting in this man ner causes you to e xit APS and stop all running processe s, app lication s, and sc ripts. Exiting the APS inte rface by c losing t he APS console shell sh uts down all script s and applica tions. If se lecting Qui t fail ...

  • Lucent Technologies AP-3 - page 114

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 114 101-1830 -001 Issu e 1.0 Sett ing th e Sta tus Log File Size The size of the sta tus log fi le is set to 20,000 entr ies at in stallation. Th ere should be no reason to chan ge it. However , i f you fi nd it n ecessa ry to r eset t he fil e size of the s tatus log file : 1. From the APS mai n m ...

  • Lucent Technologies AP-3 - page 115

    Procedur es 101-1830 -001 Issu e 1.0 115 3. Ente r x25to ol& 4. Choo se Network Link(s) Status to see t he link status of the X.25 lin ks to the Sier ra/CA. 5. Check lin k status agai n before exiti ng. Monitoring Syste m Performance Use th is procedure to measure how wel l the Sun syst em is performi ng with res pect to disk , memory , and pro ...

  • Lucent Technologies AP-3 - page 116

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 116 101-1830 -001 Issu e 1.0 Replacing a Hard Disk Use t hi s proc edur e to rep lace a faile d hard d isk in eithe r the S un syst em chassis , MultiPack or A1 000 array . All dri ves in an A1000 sh ould be of the same size. 1. Pow er dow n the Su n. See ‘ ‘Shutting Down the APS Sun Sys tem’ ...

  • Lucent Technologies AP-3 - page 117

    Procedur es 101-1830 -001 Issu e 1.0 117 Application-specific T asks Applicat ion-specif ic tasks con cern the appl ication loa ded on top of t he APS platfo rm software . Refer to your applicat ion’ s user guide for specifi c instru ction. ...

  • Lucent Technologies AP-3 - page 118

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 118 101-1830 -001 Issu e 1.0 W orking with Scripts, Script Groups, and Applicat ions The many tas ks related to scripts are divided int o two groups: n ‘ ‘Managing Scr ipts, Script Gro ups, and Applica tions’’ on page 11 8 n ‘ ‘Monitoring Scr ipts, Scrip t Groups, and Applic ations’? ...

  • Lucent Technologies AP-3 - page 119

    Procedur es 101-1830 -001 Issu e 1.0 119 Creating Scr ipt Groups or Applicati ons Use this procedure to collect scr ipts and their associa ted profile s in a group. Aft er they are g rouped, you can s tart and stop t hese scripts a nd profil es si mu lt ane ously . 1. From the APS mai n menu choose System Scripts Control Manager The Scrip t Control ...

  • Lucent Technologies AP-3 - page 120

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 120 101-1830 -001 Issu e 1.0 Figure 43. Scripts Control Manag er Wind ow 3. In the Script Name field, type in a known scri pt name. 4. In the Profile Name field, typ e in a known profil e name. 5. Cli ck Add . 6. Repeat t he previou s three step s until all the script s and profiles you want t o in ...

  • Lucent Technologies AP-3 - page 121

    Procedur es 101-1830 -001 Issu e 1.0 121 Starting an Applicati on Autom atica lly After a sc ript s tart s the ver y fi r st time, i t is “re gist ered” by the a pplica tion manager and will be a utomaticall y restarte d each time the applicatio n manager starts, if the Au to Restart op tion is enabl ed in the pro file. Use this procedure to ma ...

  • Lucent Technologies AP-3 - page 122

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 122 101-1830 -001 Issu e 1.0 Starting a Scrip t Group or Applicati on Manually Use this procedure to start an d stop scrip t groups or ap plications. 1. On a SunOS command line enter ps -ef | g rep srunnerte st | grep -v g rep | wc -l The number t hat returns is the number of scripts runn ing. Make ...

  • Lucent Technologies AP-3 - page 123

    Procedur es 101-1830 -001 Issu e 1.0 123 4. Cli ck Start to displa y the next win dow . 5. Cli ck Stop to stop a ll the scri pts within the g roup. 6. Cli ck Done to exi t If thi s procedure does n ot stop the s cript group, see ‘ ‘ Shutting Down a Script Group’’ on page 126. T o fully stop the APS system, st op scripts in t he proper ord e ...

  • Lucent Technologies AP-3 - page 124

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 124 101-1830 -001 Issu e 1.0 Stopping a Single Script Use th is procedure to stop one sc ript: 1. On a SunOS command line enter ps -ef | g rep srunnerte st | grep -v g rep | wc -l The number t hat returns is the number of scripts runn ing. Make sure th is number se ems sensible. 2. From the APS mai ...

  • Lucent Technologies AP-3 - page 125

    Procedur es 101-1830 -001 Issu e 1.0 125 Deleting a Script from a Script Group T o delete a scri pt and its assoc iated profi les from the gro up: 1. From the APS mai n menu choose System Scripts Control Manager The Scrip t Control Manager wi ndow displays. 2. T ype in or cli ck on the desi red group name. 3. Cli ck Start . In the ne xt window you ...

  • Lucent Technologies AP-3 - page 126

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 126 101-1830 -001 Issu e 1.0 Shutting Down All Active Sessions Use this procedure to force all s cript sessions to stop runni ng when they cannot be stopped any ot her way . Note: This pro cedure t erminates a ll active scripts a nd applic ations. Use this procedure only if yo u cannot s top a scri ...

  • Lucent Technologies AP-3 - page 127

    Procedur es 101-1830 -001 Issu e 1.0 127 Monitoring Scripts, Script Groups, and Applicatio ns There ar e several ways th at you can monit or the proce ssing and status of script s. The followi ng procedures are available t o monitor scr ipts and applica tions: Creating, Openin g, and Deleting Scripts Developing scr ipts is not the subject of this m ...

  • Lucent Technologies AP-3 - page 128

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 128 101-1830 -001 Issu e 1.0 Starting Scripts i n T est Mode T o run a scrip t in test mode : 1. From the APS mai n menu choose System Script Configuration The RUN Script s list displ ays. 2. Choose the desired scr ipt. 3. Choo se Current Profiles The RUN profi le selection b ox displays. 4. Choose ...

  • Lucent Technologies AP-3 - page 129

    Procedur es 101-1830 -001 Issu e 1.0 129 Monitoring a Script Session Monito ring a scrip t session ca n be done with an y one of the fo llowing procedur es. See ‘ ‘Checkin g an Applicati on’ s Runti me Status by Pr ocess Level’’ on page 131. See ‘ ‘Checkin g an Applicati on’ s Runti me Status by Usa ge Level’’ on page 132. See ? ...

  • Lucent Technologies AP-3 - page 130

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 130 101-1830 -001 Issu e 1.0 Figure 44. Applicatio n Manager Monitor Lis t 2. Cli ck Run to d ispla y scri pts th at are cu rrent ly acti ve. Once you cho ose Run , three co lumns display in t he Applicati on Manager Mo nitor List windo w . T able 8 describes the column s in the window . 3. Cli ck ...

  • Lucent Technologies AP-3 - page 131

    Procedur es 101-1830 -001 Issu e 1.0 131 Checking an Applicati on’ s Runtime Status by Process Level This proc edure checks the run time s tatus of a sc ript by examin ing process ID informatio n: 1. From the APS mai n menu choose System Runtime Status Process Status 2. Choose the script you wa nt to assess . 3. Choo se Script Profiles 4. Choose ...

  • Lucent Technologies AP-3 - page 132

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 132 101-1830 -001 Issu e 1.0 Checking an Applicati on’ s Runtime Status by Usage Level This proc edure checks the runtim e status of an ap plication b y examining session usage. 1. From the APS mai n menu choose System Runtime Status Script Status 2. Choose the script to a ssess. 3. Choo se Scrip ...

  • Lucent Technologies AP-3 - page 133

    Procedur es 101-1830 -001 Issu e 1.0 133 T able 9 describes the fields in the Runtime Sta tus window . Debugging Scripts I nformation on d ebugging sc ripts is incl uded in the W i zar d Deve lo per ’ s Guide from I nnov a tive S ystem s Serv ices, Inc. T able 9. Fie lds in the Runtime Status Window Field Des cription Number of Activ e Sessions T ...

  • Lucent Technologies AP-3 - page 134

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 134 101-1830 -001 Issu e 1.0 W orking with Profiles This sec tion descri bes tasks re lated to profiles: V iewi ng the Prof ile Window Y ou can perform most scri pt administration using the Pro file window . These st eps show you how to view the profi le of a script. 1. From the APS mai n menu choo ...

  • Lucent Technologies AP-3 - page 135

    Procedur es 101-1830 -001 Issu e 1.0 135 Rename Profiles 4. Choose the profile name . The Rename Scr ipt Profile wi ndow displays with the current profil e name. 5. In the New Profile Name field, ente r t he new name for the profil e. 6. Cli c k Rename . An in fo rmat ional m essa ge disp lays. 7. Cli ck OK. Modifying Pr ofiles This proc edure show ...

  • Lucent Technologies AP-3 - page 136

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 136 101-1830 -001 Issu e 1.0 Creating New Profiles Thi s procedure shows you , in a general manner , how to c reate a profil e for a sc ript. Profi les are spec ific to an a pplication . See the applicat ion documen t to set up profi les specif ically . T o create a profile for a script: 1. From th ...

  • Lucent Technologies AP-3 - page 137

    Procedur es 101-1830 -001 Issu e 1.0 137 7. Depending on the purpo se of th e s cr ipt , e n ab le th e correspond ing server option and fill in th e parameters a s necessary . See your a pplication’ s users g uide for compl ete discussi on on how to def ine profile s for a speci fic applicat ion. See ‘ ‘The Prof ile W indow’’ on page 91 ...

  • Lucent Technologies AP-3 - page 138

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 138 101-1830 -001 Issu e 1.0 Importing and Exporting Data There ar e three proce dures availabl e to import an d export data to and from th e APS s oftwar e: Importing Applicati on-specific Utilit ies This proce d ure im port s appl ic ation -rela ted ut ilitie s. Afte r they are import ed, these u ...

  • Lucent Technologies AP-3 - page 139

    Procedur es 101-1830 -001 Issu e 1.0 139 4. Cli ck Cancel to exi t. 5. R emo ve the diske tte. Copying Scripts to a Diskette The Export utilit y copies scr ipts to a dis kette or other target . Use this utili ty to back up s cripts to a diskette. T o copy a scr ipt to a dis kette: 1. In sert t he dis kette into the diske tte dr ive. 2. From the APS ...

  • Lucent Technologies AP-3 - page 140

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 140 101-1830 -001 Issu e 1.0 Backing Up Data The APS pl atform pro vides methods for regu lar l y scheduled ba ckups and ad hoc backups . This sectio n describes the se methods. Backing Up APS Files The APS i nterface provi des a menu item t hat lets you perform a manual backup of APS data at any t ...

  • Lucent Technologies AP-3 - page 141

    Procedur es 101-1830 -001 Issu e 1.0 141 Registration and Licensing T asks Registr ation and pro per licensing of your softwar e are essentia l tasks before t he software will run pr operly . Use th ese two procedu res to register and check the licensi ng of your AP S installat ion: Registerin g APS Software Regi st ering the A P S soft ware is man ...

  • Lucent Technologies AP-3 - page 142

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 142 101-1830 -001 Issu e 1.0 5. In the Number of lines for the system field , type the nu mbe r o f virt ual cir cuits that y ou req uire. 6. In the Number of VPM connected field, e nter how many Sierra /CAs will be con nected to the APS sy stem. 7. In the Customer Name field, typ e your company’ ...

  • Lucent Technologies AP-3 - page 143

    Procedur es 101-1830 -001 Issu e 1.0 143 Figure 51. Lice nse Check Screen 2. Read this screen and ve rify that a ll the info rmation is correct. 3. If you ne ed to change an y of the info rmation, see ‘ ‘Regist ering APS Software ’’ on page 141. 4. Cli ck Run to u pdate th e ini f ile. 5. Cli ck Done to exit or Click Cancel t o abandon your ...

  • Lucent Technologies AP-3 - page 144

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 144 101-1830 -001 Issu e 1.0 SS7 Gateway T asks Use these tasks to con figure, star t, and monitor the SS7 gateway: Please b e aware that s mall changes t o the SS7 confi guration can have far reachi ng eff ects. Also, not having an SS7 connect ion to HLR can result in no product ion. W e recommend ...

  • Lucent Technologies AP-3 - page 145

    Procedur es 101-1830 -001 Issu e 1.0 145 Changing an SS7 Configurati on Fil e While it’ s unlikely tha t you will need t o create new SS7 configuration files , there may be si tuation s where you need to change one . For example, if you ne ed to add dest ination poin t codes to th e HLR_profile tabl e for your appl ication, you will need to e dit ...

  • Lucent Technologies AP-3 - page 146

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 146 101-1830 -001 Issu e 1.0 Configuring the SS7 Gateway When an APS machine is boot ed, connectio ns to the SS7 gatewa y are made automat ically usi ng the config uration file a ps.cfg. T o load a d ifferent confi gurat ion fi le: 1. From the APS mai n menu choose System SS7 Gateway SS7 Load Confi ...

  • Lucent Technologies AP-3 - page 147

    Procedur es 101-1830 -001 Issu e 1.0 147 Starting and Stopping t he SS7 Gateway When an APS m achine is boot ed, connections t o the SS7 gatewa y are start ed automaticall y . The re may be instance s when you need t o stop and restar t the SS7 gate way manually . The SS7 gat eway must be running b efore communicati on with HLR via the NewNet c ard ...

  • Lucent Technologies AP-3 - page 148

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 148 101-1830 -001 Issu e 1.0 Administeri ng the Signaling Point Code The signa ling point c ode (SPC) may also be referred to as the Netwo rk Indicat or or T ype or Signalin g Point. The SPC is an a ddress on the SS7 network. Th is point code is found in aps.c fg and must match here. Use this proce ...

  • Lucent Technologies AP-3 - page 149

    Procedur es 101-1830 -001 Issu e 1.0 149 5. Cli ck Start to begin c ommunicating wit h this proto col, Click Sto p to stop communic ating with t his protocol , Click Save to save the p arameters of this protoc ol. Click Done to exi t. T able 10. F ields in the SS7 Gate way Window Field Des cription Status Shows t he current stat us of SS7 Gateway P ...

  • Lucent Technologies AP-3 - page 150

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 150 101-1830 -001 Issu e 1.0 Monitoring SS7 Gateway Use th e SS7 tool to n Display t he status of t he SS7 links n Monitor t he SS7 networ k information in general The execut able file is located i n /export/h ome0/issg/is sg_main/issg _ lib/l ibss7tools and t he file name is ss7t ool. A flag sp ec ...

  • Lucent Technologies AP-3 - page 151

    Procedur es 101-1830 -001 Issu e 1.0 151 Figure 54 shows an exa m ple of the out put of the ss7to ol command with the lis tlink s argumen t. Figure 54. Example ss7tool Output __________________________________________ __________________________________ ss7tool listlinks lset link port prio admst oprst mcnt 0 0 0 0 2 1 0 0 1113 0 0 12203 0 0 13313 0 ...

  • Lucent Technologies AP-3 - page 152

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 152 101-1830 -001 Issu e 1.0 2. Enter t hese two commands: cd /expor t/home0/issg/ issg_main/is sg_lib/libs s7/ss7drv/bi n issg_jt est 3. E nter ? for help . 4. Ente r open /dev/ ecpmux 5. E nter se lectinfo to display t he current s election of device number , signali ng point number , and service ...

  • Lucent Technologies AP-3 - page 153

    Procedur es 101-1830 -001 Issu e 1.0 153 display (cont.) display [ con=<n/i/ o>] [log=< n/i/o>] The con ar gument and options specify the options for the conso le. The log argument an d options spec ify the optio ns fo r th e log fi le. T o use a l og file , it must have be en sp ecifie d when jtest was sta rted. The i opt ion enables d ...

  • Lucent Technologies AP-3 - page 154

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 154 101-1830 -001 Issu e 1.0 dev Specifi es the logic al device numbe r , dev#, of the Connec t7 card for t he jtest s ession. The syntax of this command is: dev dev# If no ar gument is given, the curre nt dev# is display ed. This command onl y takes ef fect after issuing the s elect comman d. sp S ...

  • Lucent Technologies AP-3 - page 155

    Procedur es 101-1830 -001 Issu e 1.0 155 pause Used in scri pt files to s uspend exe cution of th e script file. T ext, provided i n quotes, can be display ed to the cons ole. Execution is resumed by pressing ENTER key . T er minate the sc ript fi le by p r essin g ESC. When the script file is te rminated, an interactive jtest session starts. Thi s ...

  • Lucent Technologies AP-3 - page 156

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 156 101-1830 -001 Issu e 1.0 Application Manager T asks The appli cation manager i s an integra l part of APS proce ssing. Use thes e tasks t o start and mon itor the app lication mana ger: Starting and Stopping t he Applicati on Man ager The applic ation manage r monitor s app licati ons an d scri ...

  • Lucent Technologies AP-3 - page 157

    Procedur es 101-1830 -001 Issu e 1.0 157 2. Cli ck Start to activ ate the appli cation manage r as shown in Figure 57 . Figure 57. Application ma nager has been s tarted 3. Cli ck Stop to tu rn off t he applicatio n manager . 4. Cli ck Done to exi t. Note: The appl ication manager ’s stat us reflect s the current status of the a pplication manage ...

  • Lucent Technologies AP-3 - page 158

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 158 101-1830 -001 Issu e 1.0 Checking the Applicati on Manager ’ s Runtime Status Use this procedure to see if t he application manager is runn ing or not . 1. From the APS mai n menu choose System Application Manager Application Manager Status The Applic ation Manager S tatus Monitor ing window ...

  • Lucent Technologies AP-3 - page 159

    Procedur es 101-1830 -001 Issu e 1.0 159 Logge r Mana ger T asks The logge r man ager is es senti al fo r moni tori ng ala rms in th e APS syst em. Use these procedures t o work with the log ger manager pr ocess: Starting and Stopping th e Logger Manager The logge r man ager is alwa ys u p and running s o all erro rs and events ca n be writt en to ...

  • Lucent Technologies AP-3 - page 160

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 160 101-1830 -001 Issu e 1.0 2. If the l o gger m ana ger is not run ning, Figure 60 displ ays. Figure 60. Logger Mana ger Not Running 3. If the l o gger m ana ger is running, Fi gure 61 displays. Figure 61. Logger M anager Running ...

  • Lucent Technologies AP-3 - page 161

    Procedur es 101-1830 -001 Issu e 1.0 161 Cron T asks Cron tasks det er mi ne whe n pr oces se s such as report s an d bac kups should occur . Refer to th ese procedure s if you need t o manage cron t asks: Starting and Stopping Cron T asks Use this procedure to start or st op all cron t ask. T o start cro n tasks: 1. From the APS mai n menu choose ...

  • Lucent Technologies AP-3 - page 162

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 162 101-1830 -001 Issu e 1.0 4. When fi nished editing, a. Press ESC b. E nter :wq to save y our edit and e xits the sc reen. or Enter :q ! to cancel your changes. ...

  • Lucent Technologies AP-3 - page 163

    Procedur es 101-1830 -001 Issu e 1.0 163 Monitoring Cron T ask Status Use this procedure to find out what cron tasks are scheduled t o be run by the cron process. This procedure is helpful when tro ubleshooting cron problems. T o check the cron task stat us: 1. From the APS mai n menu choose Utility Cron Tasks Cron Status The Cron T ask Status wind ...

  • Lucent Technologies AP-3 - page 164

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 164 101-1830 -001 Issu e 1.0 Using SQ L Co mmands APS provide s access to t he Informix da tabase through t he APS menu interf ace. In this in terface, you type in SQL comman ds. Y ou may use these t wo procedures t o work with the database tables i f it becomes necessa ry to do so: Specifi c examp ...

  • Lucent Technologies AP-3 - page 165

    Procedur es 101-1830 -001 Issu e 1.0 165 see Informix Er r or Message s . If this book is no t ava il abl e t o you, open a te rminal window and enter finderr < return code > where < retur n code > is the value seen i n the return code field. The descr iption for the return code y ou typed displays on the scr een. 3. Cli ck Cancel or Do ...

  • Lucent Technologies AP-3 - page 166

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 166 101-1830 -001 Issu e 1.0 The Selec t All SQL window displ ays as shown in F igure 64. Figure 64. Select All SQL window 2. T ype in a vali d SQL query . The resul ts of your qu ery display in t he bottom part of the window . After t he SQL command finishes , you should see 0 (zero) in the Return ...

  • Lucent Technologies AP-3 - page 167

    Procedur es 101-1830 -001 Issu e 1.0 167 Printing The APS plat form provides access to print ing capabilit ies. These two procedur es describe how to configure a nd use a print er: Configuring Pri nters T o se t your print er configurati on: 1. From the APS mai n menu choose Utility Printer Configuration The Print er Configurati on window displays ...

  • Lucent Technologies AP-3 - page 168

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 168 101-1830 -001 Issu e 1.0 Printing a Scrip t The Print i tem in the Script menu enables you to print a s cript on a network or local pri nter if one i s available. Note: Before y ou attempt to print, make s ure that your printer configur ation has been se t up correctl y . S ee ‘‘Configuring ...

  • Lucent Technologies AP-3 - page 169

    Procedur es 101-1830 -001 Issu e 1.0 169 V iewing Logs an d Script Informati on This sec tion contain s procedures for viewing thes e files: V iewi ng the Stat us Log File The status log rec ords all error s trapped by t he APS platform. Use this procedur e to view the sta tus log: 1. From the APS mai n menu choose View Status Log V i ewing the Sta ...

  • Lucent Technologies AP-3 - page 170

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 170 101-1830 -001 Issu e 1.0 The stat us log window dis plays as shown in Figure 66. Figure 66. Status Log W indow ...

  • Lucent Technologies AP-3 - page 171

    Procedur es 101-1830 -001 Issu e 1.0 171 Viewi ng Script Info rmatio n Use th is procedure to see th e comments embedded in a script . T o view the scr ipt comments: 1. From the APS mai n menu choose View Script Information The V iew Script Inf ormation window dis plays as shown in Figure 67. Figure 67. Script Information Window 2. In the Script Na ...

  • Lucent Technologies AP-3 - page 172

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 172 101-1830 -001 Issu e 1.0 4. Cli ck OK . Script information d isplays in a nother window as in Figure 69 . Figure 69. Example of a Script Information W indow Use the s croll bar t o review the sc ript’ s comments . 5. Cli ck Done to exi t. ...

  • Lucent Technologies AP-3 - page 173

    Procedur es 101-1830 -001 Issu e 1.0 173 Viewi ng the Debug Log Use this procedure to see the ca ll flow logic o f a script a pplication: 1. From the APS mai n menu choose View Debug Log The V iew Debug Log window di splays. 2. In the Script Name field, type the name of th e script or applica tion to debug . A descri ption field dis plays as shown ...

  • Lucent Technologies AP-3 - page 174

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 174 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 175

    101-1830 -001 Issu e 1.0 175 5 T roubleshooting This chap ter contain s informat ion about: n Starti ng and Stopping the Sun System n T racking APS Pr oblems n T rouble shooting Connecti vity Problems n T roubleshoo ting Software Problems n T roubleshoo ting Hardware Pr oblems n Common Procedur es The materi al in this ch apter assumes t hat the Si ...

  • Lucent Technologies AP-3 - page 176

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 176 101-1830 -001 Issu e 1.0 Starting and Stopping the Sun System There ar e several in stances where you may need to s top and resta rt the APS Sun syst em: n Starti ng from a power of f state n Graceful rebooting n Emer gency rebooti ng n Powering d own Start ing the APS Sun System This proc edur ...

  • Lucent Technologies AP-3 - page 177

    Troubles hooting 101-1830 -001 Issu e 1.0 177 Start ing the ERP Sun System This proc edure start s the ERP Sun system f rom a power of f state. 1. Press t he power button on the back of the Sun system. In about one minute, the screen displ ays the Sun login banner . Sun boot mes sages displa y . The Sun W elcome scre en displays. 2. L og in a s roo ...

  • Lucent Technologies AP-3 - page 178

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 178 101-1830 -001 Issu e 1.0 Graceful Reboot Gr acefully reboot ing the APS cons ists of sto pping and then s tarting softwar e and hardware. 1. Stop all applications and scripts. See ‘ ‘Stopping a Script Group or App lication’’ on page 122 ‘ ‘Stopping a Sin gle Script’ ’ on page 12 ...

  • Lucent Technologies AP-3 - page 179

    Troubles hooting 101-1830 -001 Issu e 1.0 179 7. W ait 15 se cond s for t he fan s and dr ives t o spin down. 8. Press t he power button again to restor e power . Info rmix and APS rest art automa tically . ‘ ‘Sta rting the APS Sun Sys tem’’ on page 176 desc ri bes w hat happens a t boot up. 9. From the APS mai n menu, examine t he status l ...

  • Lucent Technologies AP-3 - page 180

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 180 101-1830 -001 Issu e 1.0 Shutting Down the ERP Sun System Use this procedure to gracefully shut down th e ERP Sun system. 1. Login as r oot and enter cd / shutdown -y -i0 -g0 2. On a SunOS command line enter ps -ef | g rep srunnerte st | grep -v g rep | wc -l The number t hat returns is the one ...

  • Lucent Technologies AP-3 - page 181

    Troubles hooting 101-1830 -001 Issu e 1.0 181 T racking APS Problems This sec tion contain s general guides to use when tr oubleshootin g. n General t roubleshoot ing procedure s n Keeping r ecords n Checking Con nectivity n Starti ng two APS sessio ns General T roubleshootin g T rouble shooting always co nsists of t hese basic st eps: 1. Confirm t ...

  • Lucent Technologies AP-3 - page 182

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 182 101-1830 -001 Issu e 1.0 n Has any cus tom work been done recently? n Has t his m ac hine e xper ience d the s a me pr oblem befor e? n Have other APS sites experi enced this probl em? Do the maintena nce logs at ot her sites d escribe the problem and it s resolut ion? Starting T wo APS Session ...

  • Lucent Technologies AP-3 - page 183

    Troubles hooting 101-1830 -001 Issu e 1.0 183 T roubleshooting Connectivity Problems The troub leshooting i nformation i n this secti on discusses the followi ng connecti vity topic s: n No Connecti vity Between APS Machin e and Sierra/ CA ...For Sit es That Use X.25 ...For S ites That Use TCP/I P n Remote User Cannot Connect to APS Mac hine n APS ...

  • Lucent Technologies AP-3 - page 184

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 184 101-1830 -001 Issu e 1.0 No Connectivity Betw een APS Machine and Sierra/CA Failure of the APS to co mmunicate wit h the Sierra/CA pr esents partic ularly limi ted diagnost ic and correc tive measures . T o further complica te the proble m, there may be an Xspan box or PDN (Packet /Public Data ...

  • Lucent Technologies AP-3 - page 185

    Troubles hooting 101-1830 -001 Issu e 1.0 185 n Software drivers are missing or not r eferenced proper ly n The TCP/IP e nable portio n of the prof ile for an ap plication has not been administered correctly . n X.25 h ardwa re has failed for som e rea son n TCP /I P hard w are h as fail e d for s ome rea son Resolution T o correct th is connect iv ...

  • Lucent Technologies AP-3 - page 186

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 186 101-1830 -001 Issu e 1.0 For Sites That Use X.25 If your site uses X.25 to connect th e APS and the Sierra /CA, use the procedur es in this s ection. n Check the physic al li nk n Check the A PS administrat ion of the link n Check the Sierra/CA’ s administrati on of the li nk n Place a t est ...

  • Lucent Technologies AP-3 - page 187

    Troubles hooting 101-1830 -001 Issu e 1.0 187 10. Enter x25tool& 1 1. Choose Network Stop X25 12. In the bo ttom of the window yo u will see the message: “The networ k has been st opped.” Expect t his to take h alf a minute or so . 13. T o restart a ll X.25 links fro m the APS: a. Op en the X .25 t oo l. b. Choose Network Start X25 In the b ...

  • Lucent Technologies AP-3 - page 188

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 188 101-1830 -001 Issu e 1.0 7. Enter t he link number you not ed in step 4. The link number and link status displ ays in the c olumns INTERFACE and STATUS . 8. E nter a 2 to stop the link. The botto m of the scree n displays th e message “Physica l Interface s top engaged. ” The stat us of the ...

  • Lucent Technologies AP-3 - page 189

    Troubles hooting 101-1830 -001 Issu e 1.0 189 4. Choo se Network Link(s) Status 5. Make sure the link shows as CONNECTED NORMAL. Do an X.25 trace to make sure that the X.25 links are up. a. From a terminal window e nter cd /opt/ SUNWconn/x25/bin ./x25tra ce -l < link number > -t where -l is the link number to trace. Th e -t ar gument puts a t ...

  • Lucent Technologies AP-3 - page 190

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 190 101-1830 -001 Issu e 1.0 For Sites That Use TCP/ IP If your sit e use s TCP /IP c onnecti vity to c ommunicat e with the Sie rra/C A, use thes e procedures to check that link: n Check the physic al li nk n Check the Sierra/CA’ s administrati on of the li nk n Check the A PS administrat ion of ...

  • Lucent Technologies AP-3 - page 191

    Troubles hooting 101-1830 -001 Issu e 1.0 191 Check the Applicati on’ s Profiles Check the application ’ s profile s that use TCP/IP En able and make su re that t he TCP/IP connect ion is set u p correctly the re. The appli cation documen tation conta ins the corr ect setti ngs for profile s that us e the TCP/IP Enabl e button. Refe r to that d ...

  • Lucent Technologies AP-3 - page 192

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 192 101-1830 -001 Issu e 1.0 be runni ng concurrent ly with the sn oop command. The field engineer or customer c an monitor TCAP error return valu es. 9. Using a ha ndset, dial t he extension to the Sierra/ CA. If you he ar “Sorry . The servic e you have requ ested is not availa ble. Please try a ...

  • Lucent Technologies AP-3 - page 193

    Troubles hooting 101-1830 -001 Issu e 1.0 193 Remote User Cannot Connect to APS Machine Remember that there are two ways for a remot e user to acc ess the APS machine, ov er the W AN and d ialing in thro ugh a modem. This secti on discuss es dialing in wi th a modem. Symp tom Remote user s trying to acc ess the APS machi ne with a modem and P PP (p ...

  • Lucent Technologies AP-3 - page 194

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 194 101-1830 -001 Issu e 1.0 6. If the pr oblem pers ists f or ove r an ho u r , ca ll the APS sit e and have an on site worker chec k the APS machine. 7. If the above steps do not correct the problem, escal ate this problem t o the next level of support. ...

  • Lucent Technologies AP-3 - page 195

    Troubles hooting 101-1830 -001 Issu e 1.0 195 APS Cannot Connect to L AN/W AN The APS machin e cannot connec t to the LAN/W AN and c ommunicate with any o f the agents on it. Agents on th e LAN that the APS wou ld expe ct to se e are: n Passive al arm monit ori ng syst ems n OSS (Operat ional System Suppor t) n SMSC (Shor t Message Servi ce Center) ...

  • Lucent Technologies AP-3 - page 196

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 196 101-1830 -001 Issu e 1.0 APS Cannot Comm unicate With HLR In APS 4.1, al l communicatio n to the HLR is acro ss the NewNet car d. Symp tom n Out-bound calls are be ing made to mobil e phones in ro aming areas no t served by t he provider n IS-41 pr oxy- or clie nt-type errors (such as 52402 7, ...

  • Lucent Technologies AP-3 - page 197

    Troubles hooting 101-1830 -001 Issu e 1.0 197 4. Check the links and rout es. Open the a ps.cfg file and ma ke sure that links and rout es are defined cor rectly . See ‘ ‘Changing an SS 7 Configurati on Fi le ’’ on page 145 f or more det ails on how to do t his, or contac t the support li ne. 5. If the above steps do not correct the situati ...

  • Lucent Technologies AP-3 - page 198

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 198 101-1830 -001 Issu e 1.0 No Prompt When Accessing APS Over the Modem Symp tom A remote us er dials in. Even though the APS sy stem answers, the remote user nev er gets a log in prompt in t he post dial up window . Basis n Serial port setup i n Admintool is inco rrect n Dial up nu mber is pro ba ...

  • Lucent Technologies AP-3 - page 199

    Troubles hooting 101-1830 -001 Issu e 1.0 199 If you su spect that the dial up number i s incorrect, do the followi ng: 1. Make sure y ou typed in the correct number , making no typing error s. 2. Check the number in your c ommunications so ftware if i t is embedded t here. 3. Make sure y ou have the corre ct number to dial in on. Y ou may have to ...

  • Lucent Technologies AP-3 - page 200

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 200 101-1830 -001 Issu e 1.0 T roubleshooting Software Problems This sec tion descri bes the foll owing software problems: n Loss of Sy stem H e art be at n Call T raci ng TCAP Messages n Cannot Sta rt Applicat ion Manager n Cannot Load SS7 Drivers Loss of System Heartbeat Symp tom Informat ional a ...

  • Lucent Technologies AP-3 - page 201

    Troubles hooting 101-1830 -001 Issu e 1.0 201 Call T racing TCAP Messages T o invoke a trace be tween the SS7 gat eway and the APS pl atform, use t he followi ng procedure at the APS system. This proce dure assumes you ha ve only one n etwork interfa ce, “hme0”. 1. Log i n as r o ot. Y ou must have r oot access. 2. Ente r snoop -d hme0 -x 0 > ...

  • Lucent Technologies AP-3 - page 202

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 202 101-1830 -001 Issu e 1.0 Error co des for snoop a re provided in T able 14. T ab le 14. TCAP Error Codes Reason Code Meaning Description 0x00 Not used — 0x01 Unassigned d irect ory number The cellul ar handset is not ser ved by the accessed s ystem. 0x02 Inactive The cellul ar handset is not ...

  • Lucent Technologies AP-3 - page 203

    Troubles hooting 101-1830 -001 Issu e 1.0 203 Cannot Start Applicatio n Manager Symp tom n APS is runn ing but appli cations on it c annot start n Outside a gents will be ab le to connect to the APS, but wi ll not be ab le to run an ap plication n Calls wil l not go through the applicati on Basis There ar e two reasons APS cannot start the applic a ...

  • Lucent Technologies AP-3 - page 204

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 204 101-1830 -001 Issu e 1.0 If Informi x is not running: 1. Rebo ot t he Sun. Rebooting causes all software c omponents to l oad proper ly . I f the Informix database is not running pr operly , you may suspect that other s oftware acti vities may at fault. See ‘ ‘Rebooting the Sun System’’ ...

  • Lucent Technologies AP-3 - page 205

    Troubles hooting 101-1830 -001 Issu e 1.0 205 Cannot Load SS7 Drivers Symp tom n Can’ t load the SS7 driver n The NewNet ca rd was moved to a d ifferent slot n Solaris fi nds the NewNet card but s ees it as somet hin g other than dev #0 Basis This proble m may be due to: n Bad NewNet ca rd n Bad s bus s lot n Hardware i s not config ured properly ...

  • Lucent Technologies AP-3 - page 206

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 206 101-1830 -001 Issu e 1.0 T roubleshooting Hardware Problems For hardwa re problems related to generic Sun Ultr a hardware components , consult your Sun manuals. F or hardware pr oblems relate d to customiz ed components sp ecific to t he APS machine, use this sect ion for advice o n troubleshoo ...

  • Lucent Technologies AP-3 - page 207

    Troubles hooting 101-1830 -001 Issu e 1.0 207 Common Procedures The common pro cedures disc ussed in this section are: n Replacin g cards n Replacin g the NewNet card n Replacin g the X.25 card n Replacin g the TCP/IP car d n Cleaning the tape dri ve General Notes about Replacing Cards Use this general p rocedure to inst all or remov e any circuit ...

  • Lucent Technologies AP-3 - page 208

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 208 101-1830 -001 Issu e 1.0 n Stop all applicat i ons and scripts. See ‘ ‘Stopping a Script Group or App lication’’ on page 122. ‘ ‘Stopping a Single Script’ ’ on page 124. This may ta ke 3 to 4 minute s. n Exit t he APS main m e nu. See ‘ ‘Quitting the APS Interf ace’’ on ...

  • Lucent Technologies AP-3 - page 209

    Troubles hooting 101-1830 -001 Issu e 1.0 209 Replacing the NewNet Card Lucent T echnologies OMD sup port personne l use this proc edure to change t he NewNet card. The y will need a s crewdriver a nd the correc t Sun h ardwa re ma nuals to remo ve th e card . There ar e no jumpers or swit ches to set on the NewNet card. 1. Follow th e general pro ...

  • Lucent Technologies AP-3 - page 210

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 210 101-1830 -001 Issu e 1.0 Replacing the X.25 Card Sun suppor t personnel u se this proc edure to chang e the X.25 link card in fifte en minutes. They will ne ed a screwdri ver and the co rrect Sun hardware manuals to rem ove the card . There ar e no jumpers or swit ches to set on the X.25 card. ...

  • Lucent Technologies AP-3 - page 211

    Troubles hooting 101-1830 -001 Issu e 1.0 211 5. R eboo t the w orks tatio n. Se e ‘ ‘St arting the ERP Sun S ystem’’ on page 177. The ERP soft ware starts up automatica lly . 6. Check that ERP is functioni ng correctl y for the next da y or two. Cleaning the T ape Drive Y ou should clean the ta pe drive on t he Sun system reg ularly , keep ...

  • Lucent Technologies AP-3 - page 212

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 212 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 213

    101-1830 -001 Issu e 1.0 213 6 Backing Up and Restoring Data This chap ter discuss es backing up and restoring all data on the Sun system. n Backing Up a nd Restoring the Sun System n Rest oring a Full o r Parti al Im ag e n APS Backup and Restore n Inform ix Software Backup and Restore n Informix Database Backup and Restore Note: When yo u use a f ...

  • Lucent Technologies AP-3 - page 214

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 214 101-1830 -001 Issu e 1.0 Autom atic B a c k u p s Backups ar e performed au tomatically at 1 1:00 p.m. Y ou must place a tape in the tape drive a nytime prior to the backup ti me so as not to generate errors. W e recommend t hat you prepare one tape for e very day of the wee k, for example, ha ...

  • Lucent Technologies AP-3 - page 215

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 215 Restoring a Full or Partia l Image Use this pr oce dur e to restore dat a f rom a t ape to th e har d dri ve in th e Sun system. Thi s procedure res tores the en tire hard disk in the APS syste m usin g the ins tall_fs command. Th e install_fs c ommand has options as shown in Fi gure 76. ...

  • Lucent Technologies AP-3 - page 216

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 216 101-1830 -001 Issu e 1.0 Full System Recovery (no setu p) Option 2 o n the instal l_fs menu replace s all data on al l hard disks , but does no t change any s ystem configurat ion data tha t has been set previous ly . Use this option to re store a machin e from a backup t ape from that sa me ma ...

  • Lucent Technologies AP-3 - page 217

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 217 Informix Software Backup and Restore The I nform i x soft ware resid es on h o me1. T o back up the Inf ormi x sof twa re package, use the sys_bac kup c omma nd and make a man ual backup as d escribed in ‘ ‘Making Manual Backups ’’ on page 214 . T o restore the I nformix s oftwar ...

  • Lucent Technologies AP-3 - page 218

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 218 101-1830 -001 Issu e 1.0 Example Output of inst all_f s:full recovery , (set up) instal l_fs menu op tion 1 performs a full resto re and prompts for setup informat ion. This is the menu option used when install ing a new drive or a new site. The exam ple output below s hows the proced ure used ...

  • Lucent Technologies AP-3 - page 219

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 219 Please Enter the operation to be performed : 1 You selected "Full system installation and setup" Is this correct (yes or no)? y Configuring VTOC for /dev/rdsk/c0t0d0s2 (d isk 0) done Configuring VTOC for /dev/rdsk/c0t1d0s2 (d isk 1) done Creating File System for root (/dev/rdsk ...

  • Lucent Technologies AP-3 - page 220

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 220 101-1830 -001 Issu e 1.0 You entered 135.9.134.227, Is this correct (yes or no)? y Please Enter the Host PPP Netmask [255.255 .255.0]: You entered 255.255.255.0, Is this correct (yes or no)? y # # # __________________________________________ __________________________________ ...

  • Lucent Technologies AP-3 - page 221

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 221 Example Output of inst all_f s:fu ll recovery ( no setup) The exam ple output below s hows the proced ure used to re store on an A1000-Full recovery wit h no setup, ins tall_fs menu option 2. __________________________________________ __________________________________ ...boot from CDROM ...

  • Lucent Technologies AP-3 - page 222

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 222 101-1830 -001 Issu e 1.0 1. Full system installation and setup 2. Full system recovery (no setup) 3. Partial system recovery and setup 4. Partial system recovery (no setup) 5. Help 6. Quit Please Enter the operation to be performed : 2 You selected "Full system recovery (no set up)" I ...

  • Lucent Technologies AP-3 - page 223

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 223 Example Output of inst all_f s:pa rtial recovery ( setup) The exam ple output below s hows the proced ure used to re store on an A1000 part ial recover y with setup, ins tall_fs menu o ption 3. __________________________________________ __________________________________ ...boot from CDR ...

  • Lucent Technologies AP-3 - page 224

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 224 101-1830 -001 Issu e 1.0 configuration shown above. A tap e made on a system with an A1000 disk array cannot be ins talled on a system with a MultiPack disk array, and vice versa. WARNING: this is a destructive installatio n of software. All data in the filesystems you select to be installed/re ...

  • Lucent Technologies AP-3 - page 225

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 225 Timezone: 3 You have selected Mountain, Is this correc t (yes or no)? y The date and time is currently set to Fri Feb 19 23:56:15 MST 1999 Would you like to change the date and/or t ime? (yes/no) [no]: Please enter a password for the root user New password: Re-enter new password: passwd ...

  • Lucent Technologies AP-3 - page 226

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 226 101-1830 -001 Issu e 1.0 Example Output of inst al l_fs , p ar t ial recovery ( no setup) The exam ple output below s hows the proced ure used to re store on an A1000-p artial recove ry with no set up, install_ fs menu option 4 . __________________________________________ ______________________ ...

  • Lucent Technologies AP-3 - page 227

    Back ing Up and R estoring Dat a 101-1830 -001 Issu e 1.0 227 Creating File System for root (/dev/rdsk/c 0t0d0s0) done Creating File System for /var (/dev/rdsk/c 0t1d0s1) done Installing bootblk on the root drive done Restoring the root filesystem from tape d one Restoring the /var filesystem from tape d one Would you like to restore any of the fol ...

  • Lucent Technologies AP-3 - page 228

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 228 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 229

    101-1830 -001 Issu e 1.0 229 7 Errors This chap ter contain s informat ion about: n Passive al arm monit ori ng n Status l og file n Inte rpreting er rors n APS symptoms, er rors, and inf ormational me ssages n Error de scriptions and troubles hooting proce dures The Status Log File The stat us log file contains all informatio nal and error message ...

  • Lucent Technologies AP-3 - page 230

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 230 101-1830 -001 Issu e 1.0 Besi des th e ring bu ffer , th e statu s log fi le is m a intai ned in an othe r file loca ted in: /export /home0/issg/ issg_main/i ssg_lib/li blogger/iss g_logger_seq _file This fi le keeps addi ng entries t o the end of t he file and is de leted hourl y . File Fo rma ...

  • Lucent Technologies AP-3 - page 231

    Er rors 101-1830 -001 Issu e 1.0 231 4. Stop and t hen restart the logger manage r . See ‘ ‘Starting a nd Stopping the Logger Manage r ’’ on page 159. What Makes Up an Alarm The foll owing section s explain the message fo rmat for e ach group of alarms, h ow the alarms ar e numbered, and the alarm categor ies common to both g roups of alarm ...

  • Lucent Technologies AP-3 - page 232

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 232 101-1830 -001 Issu e 1.0 Interpreting an Error with Status Log File Codes Each entry in the st atus l og file cont ai ns the field s: n status _type - denote s the seve rity of the er ror n module _type - denote s the module that genera ted the er ror n error_c ode - denotes the specifi c error ...

  • Lucent Technologies AP-3 - page 233

    Er rors 101-1830 -001 Issu e 1.0 233 Status T ypes Status typ es denote the sever ity of the error . Possible statu s type s of err ors are lis ted in T a b le 1 6. T able 16 . Stat u s T ypes Error T y pes V alue Description W ARNING 1 - Mino r This is a minor er ror condition. I t indicate s a condit ion that can automatic ally be corr ected by t ...

  • Lucent Technologies AP-3 - page 234

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 234 101-1830 -001 Issu e 1.0 Module T ypes Module type s designate the software m odule, such as I nterprete r or Database , that genera ted the erro r . Soft ware modules and their module number are listed in T ab le 17 below . INFO 3 - Informat ional Informati onal entry . This is a non-servi ce- ...

  • Lucent Technologies AP-3 - page 235

    Er rors 101-1830 -001 Issu e 1.0 235 0005 OCL OCL library V alue Module T ype Description 0006 Logger Logger lib rary 0007 Cron Cron library 0008 Applicati on Manager Application ma nager 0009 T racer T racing subsy stem 0010 Licens e Manager License manager subsystem 001 1 SMPP SMPP library 0012 CMD Report — 0013 RMPP RMPP library 0014 OSA Serve ...

  • Lucent Technologies AP-3 - page 236

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 236 101-1830 -001 Issu e 1.0 Error Co de Range s T able 18 gives the ranges into which error c odes are group ed. V alue Module T ype Description 0101 TCP/IP Proto col Library — 0600 to 0699 System he artbeat Disk fu ll Auto_Init on reboot Backup fail ure SS7 check — T able 17. Module T ypes (C ...

  • Lucent Technologies AP-3 - page 237

    Er rors 101-1830 -001 Issu e 1.0 237 514000 thr ough 514999 OCL for OSA 515000 thr ough 515999 BCCS 516000 thr ough 516999 SMTP 517000 thr ough 517999 Dynamic Parame ters 518000 thr ough 518999 IS-41 Proxy Server 519000 thr ough 519999 IS-41 Clie nt 520000 thr ough 520999 CMD Billing and Reporting 521000 thr ough 521999 NGW Subsystem 522000 thr oug ...

  • Lucent Technologies AP-3 - page 238

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 238 101-1830 -001 Issu e 1.0 Errors This sec ti on describes a ll the err or c odes. Each er ro r de scription p rovides info rmation about n The e rror ty p e n What soft ware module gener ated the error n Message s and data th e error disp lays n A descri ption of what caus ed the error n How to ...

  • Lucent Technologies AP-3 - page 239

    Er rors 101-1830 -001 Issu e 1.0 239 Development Alarms T able 19 summarize s error s that may be fo und in the stat us log but refle ct alarm poi nts for debug ging software . If you encount er any of th e errors found in T ab le 19, please call t he technica l support hot line. T able 19. Undefined Error Co des 4 503002 51700 1 524014 60000 50300 ...

  • Lucent Technologies AP-3 - page 240

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 240 101-1830 -001 Issu e 1.0 Error Summary T able 20 summarizes the errors desc ribed in the rest of thi s chapter . T a ble 20. Summary of Error Codes Error Name Level 200001 Script cannot run Info 200005 Failed to open virtual ci rcuit Error 200008 Failed to ope n Informix POI, criti cal 400000 F ...

  • Lucent Technologies AP-3 - page 241

    Er rors 101-1830 -001 Issu e 1.0 241 506006 Problem openi ng X.25 circui t Error 506007 VC closed by e xternal devi ces Error 50601 1 Problem writ ing to X.25 cir cuit Error 508001 Invalid sof tware license Error 508002 Unmatched hos t name Error 508003 Unmatched IP a ddress Error 508004 Software lic ense expired Error 508005 Invalid lic ense key E ...

  • Lucent Technologies AP-3 - page 242

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 242 101-1830 -001 Issu e 1.0 600000 APS heartbeat Info 600001 APS config fil e error Info 600002 T oo few APS scri pts Error 600003 Application ma nager not runnin g Error 600004 Informix n ot running POI, critica l 600010 APS reboot Init started Info 60001 1 APS Reboot_Ini t sta rt ed log ger man ...

  • Lucent Technologies AP-3 - page 243

    Er rors 101-1830 -001 Issu e 1.0 243 600030 Backup tape fai led to rewin d Error 600031 Backup failed to create vt oc Error 600032 Backup fail ed to tar sc ripts to tape Error 600033 Backup failed on xxx file syst em Error 600034 No SS7 links in s ervice Err or 600035 xxx numbe r of SS7 links in service Inf o 600037 Error runnin g issg_ ss7_ stackl ...

  • Lucent Technologies AP-3 - page 244

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 244 101-1830 -001 Issu e 1.0 200001 Error T y p e 3 – Informati ona l Module T ype 4 - Interp ret er Status Mes sag e INFO: (Scr ipt: <script name>) Cannot run. Sc ript stopped . Status Da ta 1 Called by the script runner . Effect No ef fect. This a larm is infor mational onl y . Descriptio ...

  • Lucent Technologies AP-3 - page 245

    Er rors 101-1830 -001 Issu e 1.0 245 200005 Error T y p e 2 - Error Module T ype 4 - Interpret er Status Mes sag e ERROR: (Scri pt: <script na me>) Failed t o open vc. Status Da ta 1 This err or may have eit her of these mess ages in the St atus Data 1 fie ld: Called by the schedule r . or Script run ner failed. Effect Serv ice wi ll be a f f ...

  • Lucent Technologies AP-3 - page 246

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 246 101-1830 -001 Issu e 1.0 200008 Error T y p e 4 - PO I, Crit ic al Module T ype 1 - Database Status Mes sag e POI: Fail ed to open dat abase issg_db. Ret urn code = [i nt]. Status Da ta 1 Calle d by the Script runne r. Effect Failure to open the da tabase resul ts in no prod uction. Description ...

  • Lucent Technologies AP-3 - page 247

    Er rors 101-1830 -001 Issu e 1.0 247 400000 Error T y p e 2 - Error Module T ype 4 - Interpret er Status Mes sag e ERROR: Script : <script name> failed to op en SMPP connection <inte ger> Status Da ta 1 Script run ner failed. Effect Serv ice wi ll be a f f ected . Description Script runner was unabl e to open SMPP conne ction. The in te ...

  • Lucent Technologies AP-3 - page 248

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 248 101-1830 -001 Issu e 1.0 501001 Error T y p e 1 - W arn ing 2 - Error Module T ype 8 - Appli cation Manager Status Mes sag e This err or can displ ay any of the fol lowing Status Messa ges: W ARNING: Key f ile not found. W ARNING: Fil e not found. ERROR: File no t found. Each of t hese status m ...

  • Lucent Technologies AP-3 - page 249

    Er rors 101-1830 -001 Issu e 1.0 249 Effect No ef fect, the s ystem can recov er from this e rror . Description The appli cation manager was unable to fi nd the specif ied file. Che ck the file sy stem for an y error s. This error cause s the a p plica tion m a nage r to exit . Resolution 1. Restart the script. See ‘ ‘Starting a Singl e Script? ...

  • Lucent Technologies AP-3 - page 250

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 250 101-1830 -001 Issu e 1.0 Description The appli cation manag er was unable to r egister a scrip t run due to missi ng issg_ap pmgr_key . This causes the applica tion manager t o exit. Resolution 1. Restart the script. See ‘ ‘Starting a Singl e Script’’ on page 123 or ‘ ‘Starting a Sc ...

  • Lucent Technologies AP-3 - page 251

    Er rors 101-1830 -001 Issu e 1.0 251 501002 Error T y p e 2 - Error Module T ype 8 - Appli cation manager Status Mes sag e ERROR: Applicati on manager is not r unning Status Da ta 1 Script cannot be sta rted without a valid appmgr . Effect Serv ice wi ll be a f f ected . Description The appli cation manager i s not start ed but is trying to start s ...

  • Lucent Technologies AP-3 - page 252

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 252 101-1830 -001 Issu e 1.0 501006 Error T ype 2 - Error Module T ype 8 - Appli cation manager Status Mes sag e ERROR: Problem spawning a task . Status Da ta 1 RC=[inte ger] ERRNO=[integer ] Effect Serv ice wi ll be a f f ected . Description The appli cation manager i s having a prob lem spawning ...

  • Lucent Technologies AP-3 - page 253

    Er rors 101-1830 -001 Issu e 1.0 253 501012 Error T y p e 1 - W arn ing 2 - Error Module T ype 8 - Appli cation manager Status Mes sag e This error c an ha ve the fo llow ing Sta tus M essag e s: ERROR: Unable t o generate the i ssg_proc fi le. ERROR: Unable t o perform read on i ssg_proc fi le. ERROR: Unable t o create is sg_appmgr_ps_stat .out. E ...

  • Lucent Technologies AP-3 - page 254

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 254 101-1830 -001 Issu e 1.0 501013 Error T y p e 1 - W arn ing 2 - Error Module T ype 8 - Appli cation manager Status Mes sag e W ARN ING: Unab le to per form write on da ta file. or ERR O R: Una ble to perfo rm wri te on d ata fil e. Status Da ta 1 ERRN O=[i ntege r] FILE = [strin g] Effect Serv ...

  • Lucent Technologies AP-3 - page 255

    Er rors 101-1830 -001 Issu e 1.0 255 501020 Error T y p e 2 - Error Module T ype 8 - Appli cation manager Status Mes sag e This error c an ha ve the fo llow ing Sta tus M essag e s: ERROR: V alid WIZ ARD license not foun d. ERROR: Unable t o perform chec k on license. ERROR: Unable to perform c heck on max VC su pported for this licen se. ERROR: Un ...

  • Lucent Technologies AP-3 - page 256

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 256 101-1830 -001 Issu e 1.0 503001 Error T y p e 2 - Error Module T ype 1 - Database Status Mes sag e ERROR: Unknown database ele ment . Status Da ta 1 Database contains unkn own base element type=[Inte ger] Effect Serv ice wi ll be a f f ected . Description The datab ase table co ntains an unkn o ...

  • Lucent Technologies AP-3 - page 257

    Er rors 101-1830 -001 Issu e 1.0 257 505001 Error T ype 2 - Error Module T ype 5 - OCL Status Mes sag e ERR O R: Una ble to send O CL com mand to the networ k. Status Da ta 1 RC = [ in tege r] SOC KET = [i nteg er] OCL PKT = [strin g ] Effect Serv ice wi ll be a f f ected . Description APS is havi ng diffic ulty sending an OCL c omm and to the VPM ...

  • Lucent Technologies AP-3 - page 258

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 258 101-1830 -001 Issu e 1.0 505002 Error T y p e 2 - Error Module T ype 5 - OCL Status Mes sag e ERR O R: Una ble to read OC L da ta from the ne twork. Status Da ta 1 RC = [inte ger] SOCKET = [int eger] Effect Serv ice wi ll be a f f ected . Description APS softwar e was unable to re ad expected O ...

  • Lucent Technologies AP-3 - page 259

    Er rors 101-1830 -001 Issu e 1.0 259 505005 Error T y p e 4 - PO I, Crit ic al Module T ype 5 - OCL Status Mes sag e POI: Para m eter unknown to t he ISSG OCL parser . Status Da ta 1 P ARAM_ID=[<in teger>] Effect If OCL commands cannot be pars ed, there will b e no call pro duction. Description The O C L pa rser so f tware enco unter ed an O ...

  • Lucent Technologies AP-3 - page 260

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 260 101-1830 -001 Issu e 1.0 50501 1 Error T ype 4 - PO I, Crit ic al Module T ype 5 - OCL Status Mes sag e POI: Unknown p arameter enco untered by OCL par ser . Status Da ta 1 OCLP RMID =[integ er] Effect If OCL commands cannot be pars ed, there will b e no call pro duction. Description The O C L ...

  • Lucent Technologies AP-3 - page 261

    Er rors 101-1830 -001 Issu e 1.0 261 506002 Error T ype 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: Problem openi ng X.25 virt ual cir cui t. Status Da ta 1 RC=[Inte ger] ERRNO=[Integer ] X25ADDR=[x25 addres s] Effect Serv ice wi ll be a f f ected . Description The APS soft ware was unable to open an X.25 vi rtual c ...

  • Lucent Technologies AP-3 - page 262

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 262 101-1830 -001 Issu e 1.0 506003 Error T y p e 2 - Error Module T ype 100 - X. 25 Protocol Libra ry Status Mes sag e ERROR: Problem openi ng X.25 virt ual cir cui t Status Da ta 1 X25ADDR=[x25 add ress] X25STREAM=[Integ er] Effect Serv ice wi ll be a f f ected . Description This error i ndica te ...

  • Lucent Technologies AP-3 - page 263

    Er rors 101-1830 -001 Issu e 1.0 263 506004 Error T y p e 2 - Error Module T ype 100 - X. 25 Protocol Libra ry Status Mes sag e ERROR: Problem openi ng X.25 virt ual cir cui t. Status Da ta 1 ERRNO=[Integ er] X25STREAM=[Integer ] X25ADDR=[x25 add ress] Effect Serv ice wi ll be a f f ected . Description This error i ndica te s tha t the A P S soft w ...

  • Lucent Technologies AP-3 - page 264

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 264 101-1830 -001 Issu e 1.0 506005 Error T y p e 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: Problem openi ng X25 virt ual circ ui t. Status Da ta 1 ERRNO=[Integ er] X25STREAM=[Integer ] X25ADDR=[x25 add ress] Effect Serv ice wi ll be a f f ected . Description This ...

  • Lucent Technologies AP-3 - page 265

    Er rors 101-1830 -001 Issu e 1.0 265 506006 Error T y p e 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: Problem openi ng X25 virt ual circ ui t Status Da ta 1 ERRNO=[Integ er] X25STREAM=[Integer ] X25ADDR=[x25 add ress] Effect Serv ice wi ll be a f f ected . Description This error i ndica te s tha t the A P S soft war ...

  • Lucent Technologies AP-3 - page 266

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 266 101-1830 -001 Issu e 1.0 506007 Error T ype 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: VC clo sed by externa l devices. Status Da ta 1 X25 CALL CLEAR Sent by the external de vice. or Unexpecte d control pac ket sent by t he external device. Effect Serv ice wi l ...

  • Lucent Technologies AP-3 - page 267

    Er rors 101-1830 -001 Issu e 1.0 267 50601 1 Error T ype 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: Proble m writing to X25 v irtual circui t. Status Da ta 1 ERR N O=[I n teger ] VC=[I ntege r] Effect Serv ice wi ll be a f f ected . Description The APS X.25 pro tocol libra ry encountered a problem while att empting ...

  • Lucent Technologies AP-3 - page 268

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 268 101-1830 -001 Issu e 1.0 508001 Error T y p e 4 - Po int of In terest , Criti cal Module T ype 100 - X. 25 protocol libr ary Status Mes sag e POI: Inva lid License Status Da ta 1 PID=[int eger] Effect Ther e is no call pr oduc tion i f APS is licen sed im pro pe rly . Description The lice nse m ...

  • Lucent Technologies AP-3 - page 269

    Er rors 101-1830 -001 Issu e 1.0 269 508002 Erro r T ype 2 - Error Module T ype 100 - X. 25 protocol libr ary Status Mes sag e ERROR: Unmatched hostna me Status Da ta 1 HNAME_1 = [st ring] HNAME_2 = [st ring] Effect Serv ice wi ll be a f f ected . Description The lice nse manager was u nable to find a v alid licens e for this syst em. The hostn ame ...

  • Lucent Technologies AP-3 - page 270

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 270 101-1830 -001 Issu e 1.0 508003 Erro r T ype 2 - Error Module T ype 10 - Lice nse manager Status Mes sag e ERROR: Unmatc hed IP address Status Da ta 1 IP_1 = [s tring] IP _2 = [string] Effect Serv ice wi ll be a f f ected . Description The lice nse manager was u nable to find a v alid licens e ...

  • Lucent Technologies AP-3 - page 271

    Er rors 101-1830 -001 Issu e 1.0 271 508004 Error T y p e 2 - Error Module T ype 10 - Lice nse manager Status Mes sag e ERROR: License Expired Status Da ta 1 — Effect Serv ice wi ll be a f f ected . Description The lice nse manager was u nable to find a v alid licens e for this syst em. The demo li cense that r egistered thi s system has ex pired ...

  • Lucent Technologies AP-3 - page 272

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 272 101-1830 -001 Issu e 1.0 508005 Error T y p e 2 - Error Module T ype 10 - Lice nse manager Status Mes sag e ERROR: Invalid Lice nse Key Status Da ta 1 — Effect Serv ice wi ll be a f f ected . Description The lice nse manager was u nable to find a v alid licens e for this syst em. The l icens ...

  • Lucent Technologies AP-3 - page 273

    Er rors 101-1830 -001 Issu e 1.0 273 517003 Error T y p e 2 - Error Module T ype 28 - Regis try Status Mes sag e ERROR: Open dat abase error Status Da ta 1 SQLC ODE= [Intege r] ISA M =[In t eger] Effect Serv ice wi ll be a f f ected . Description The dynami c pa ra me te r li br ar y was un able to open t he I nfo rmix database to list the pa rame ...

  • Lucent Technologies AP-3 - page 274

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 274 101-1830 -001 Issu e 1.0 518003 Erro r T ype 2 - Error Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Error i n create the socket for p rocess PID = [p id no] Status Da ta 1 Error: Create socket error Effect Serv ice wi ll be a f f ected . Description System er ror . APS i s possibly ru ...

  • Lucent Technologies AP-3 - page 275

    Er rors 101-1830 -001 Issu e 1.0 275 518004 Error T ype 2 - Error Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Error i n set socket option for Pr ocess PID = [pi d no], errno = [error no] Status Da ta 1 Error: set socket op tion error Effect Serv ice wi ll be a f f ected . Description Syst em err or . Resolution 1. Check the error no dis ...

  • Lucent Technologies AP-3 - page 276

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 276 101-1830 -001 Issu e 1.0 518005 Error T y p e 2 - Error Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Error i n bind a socket for process PID = [pid no], er rno = [error no] Status Da ta 1 Error: Bind socket er ror Effect Serv ice wi ll be a f f ected . Description Syst em err or . Res ...

  • Lucent Technologies AP-3 - page 277

    Er rors 101-1830 -001 Issu e 1.0 277 518006 Error T y p e 2 - Error Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Error i n listen for pr ocess PID = [pi d no], errno = [error no] Status Da ta 1 Erro r: List en so ck et err or Effect Serv ice wi ll be a f f ected . Description Syst em err or . Resolution 1. Check the error no dis played in ...

  • Lucent Technologies AP-3 - page 278

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 278 101-1830 -001 Issu e 1.0 518007 Error T y p e 3 - Informat io nal Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Error i n read pa cket heade r from cl ient for process PID = [pid no] , errno = [error no], socket = [s ocket no] Status Da ta 1 Error: Read packet hea der error Effect No e ...

  • Lucent Technologies AP-3 - page 279

    Er rors 101-1830 -001 Issu e 1.0 279 518010 Error T y p e 2 - Error Module T ype 20 - IS-4 1 Proxy server Status Mes sag e Select the fd set fail Status Da ta 1 Error: select err or Effect Serv ice wi ll be a f f ected . Description Syst em err or . Resolution 1. Stop and r estart the applicatio n. See the appl ication users g uide for infor mat io ...

  • Lucent Technologies AP-3 - page 280

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 280 101-1830 -001 Issu e 1.0 523000 Error T y p e 2 - Error Module T ype 26 - IPC Li brary Status Mes sag e ERRO R: Una ble to creat e or Atta ch to IPC MSG Q . Status Da ta 1 ERRNO=[Integ er] RC=[Integ er] MQ_ID=[Inte ger] MODE=[Integ er] Effect Serv ice wi ll be a f f ected . Description The IPC ...

  • Lucent Technologies AP-3 - page 281

    Er rors 101-1830 -001 Issu e 1.0 281 5230002 Error T ype 2 - Error Module T ype 26 - IP C libra ry Status Mes sag e This err or can have t w o status messa ges: ERROR: Proble m with IPC message s end to MSGQ. or ERR OR: Pr oblem wit h syst em si gnal Both of t hese messages are discussed bel ow . Resolution The resol ution for bo th types of t his ...

  • Lucent Technologies AP-3 - page 282

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 282 101-1830 -001 Issu e 1.0 Description The IPC library was unabl e to send dat a to a message q ueue because it encounte red a problem i n the system ca ll. Problem with system signal. Status Da ta 1 ERRNO=[Integ er] SIGNAL=[Intege r] Effect Serv ice wi ll be a f f ected . Description: The IP C l ...

  • Lucent Technologies AP-3 - page 283

    Er rors 101-1830 -001 Issu e 1.0 283 5230003 Error T ype 2 - Error Module T ype 26 - IP C libra ry Status Mes sag e ERRO R: Pro blem re ceivi ng data fo r IPC MS GQ. Status Da ta 1 ERRNO=[Integ er] RC=[Integer ] MQ_HAND LE=[Integer] MODE=[Int eger] TYPE=[Integ er] Effect Serv ice wi ll be a f f ected . Description The IP C li brary encount ered a p ...

  • Lucent Technologies AP-3 - page 284

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 284 101-1830 -001 Issu e 1.0 5230005 Error T ype 2 - Error Module T ype 26 - IP C libra ry Status Mes sag e ERR O R: Pr oblem creati ng or attach ing t o SHM . Status Da ta 1 ERRN O=[Int eger ] S HM_HD= [Inte ger] SH M_ ID=[ In tege r] MODE=[Intege r] NO_CHUNKS=[Integer] NO_ DA TUMS=[Integer] DA TU ...

  • Lucent Technologies AP-3 - page 285

    Er rors 101-1830 -001 Issu e 1.0 285 5230008 Error T ype 2 - Error Module T ype 26 - IP C libra ry Status Mes sag e ERROR: Request ed SHM Datum size is greater then M AX. Status Da ta 1 MAX_DA TUM_SIZE=[Inte ger] REQ_DA TUM_SIZE=[In teger] CHUNKNO=[Integer] MODE=[Integer] Effect Serv ice wi ll be a f f ected . Description APS so ftwa re attem pted ...

  • Lucent Technologies AP-3 - page 286

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 286 101-1830 -001 Issu e 1.0 5230012 Error T ype 2 - Error Module T ype 26 - IP C libra ry Status Mes sag e ERROR: Request ed SHM chunk number great er than MAX. Status Da ta 1 MAX_CHUNK_NO=[Integer ] REQ_CHUNK_COUNT=[In te ger ] MODE=[Int eger] Effect Serv ice wi ll be a f f ected . Description AP ...

  • Lucent Technologies AP-3 - page 287

    Er rors 101-1830 -001 Issu e 1.0 287 524027 Error T y p e 2 - W arn ing 3 - Error 4 - Po int of In terest , Criti cal Module T ype 29 - SS 7 Status Mes sag e INFO: SS7 Car d Alarm ERROR: SS7 Card Al arm Status Da ta 1 SP=[0] GRP=[5]TYPE=[ 11 ]MOD =[14]P AR1=[DA T A]P ARAM2=[DA T A] or SP=[0] GRP=[5]TYPE=[ 1]MOD=[132]P AR1=[DA T A]P ARAM2=[DA T A] o ...

  • Lucent Technologies AP-3 - page 288

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 288 101-1830 -001 Issu e 1.0 T o interpr et this al arm: 1. Look at t he text in th e Status 1 line a nd note the Mod a nd T ype. T ogether , th ese two values uniquely ide ntify the al arm. 2. Using the NewNet referen ce book, find t he alarm. 3. Check the severity fo r the alarm i n the book with ...

  • Lucent Technologies AP-3 - page 289

    Er rors 101-1830 -001 Issu e 1.0 289 600000 Error T ype 3 – Informati ona l Module T ype 600 - Syst em heartbeat Status Mes sag e INFO: APS HEAR TBEA T Status Da ta 1 — Effect Although t his is an in formational alarm, its absenc e in the status log file indicat es that the re is something wr ong with the APS s ystem. It may be locked or may ha ...

  • Lucent Technologies AP-3 - page 290

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 290 101-1830 -001 Issu e 1.0 600001 Error T ype 3 – Informati ona l Module T ype 600 - Syst em heartbeat Status Mes sag e INFO: Cannot check APS scrip t sanity , config fil e is missing or empt y . Status Da ta 1 Check /exp ort/home0/is sg/issg_main /issg_lib/li bheartbeat /heart beat.config Effe ...

  • Lucent Technologies AP-3 - page 291

    Er rors 101-1830 -001 Issu e 1.0 291 2. Use the r esulting numbe r from step 2 above (or change an exis ting entry) . If you nee d t o turn of f this check f or scr ip t proce sses, p ut 0 (ze ro ) in the confi gura tio n file . ...

  • Lucent Technologies AP-3 - page 292

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 292 101-1830 -001 Issu e 1.0 600002 Error T ype 2 – Error Module T ype 600 – Syst em heartbeat Status Mes sag e ERROR: TOO FEW APS s cript processe s are running . Status Da ta 1 — Effect No APS product ion, or produc tion may not be at full capaci ty . Description T oo few APS script process ...

  • Lucent Technologies AP-3 - page 293

    Er rors 101-1830 -001 Issu e 1.0 293 5. Alterna tively , you could go t o each script an d view its profi le, checking and alteri ng the number of sessions. 6. Stop the script and r estart it , observe that all the pro cesses are being use d. 7. If thes e steps do not so lve the probl em, escalate t his problem to the next level of sup port. ...

  • Lucent Technologies AP-3 - page 294

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 294 101-1830 -001 Issu e 1.0 600003 Error T ype 2 - Error Module T ype 600 - Syst em heartbeat Status Mes sag e Applicat ion manager (i ssg_appmgr) i s not running Status Da ta 1 — Effect If the application manag er is not ru nning, APS is in p roduction, but th e applica tions and scr ipts thems ...

  • Lucent Technologies AP-3 - page 295

    Er rors 101-1830 -001 Issu e 1.0 295 600004 Error T ype 4 - Po int of In terest Module T ype 600 - Syst em heartbeat Status Mes sag e ERROR: APS: SS 7 logging process is not runni ng Status Da ta 1 SS7 log ging process is not runnin g and should be. Effect No SS7 alar ms logged. Description Because t he SS7 logging p rocess is not ru nning, no SS7 ...

  • Lucent Technologies AP-3 - page 296

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 296 101-1830 -001 Issu e 1.0 600010 Error T ype 3 - Informat io nal Module T ype 601 - Au to_Init on reboo t Status Mes sag e ERROR: APS Reboot_Init sta rt ed Status Da ta 1 — Effect No ef fect. This a larm is infor mational onl y . Description This is an informatio nal error , alerting you t hat ...

  • Lucent Technologies AP-3 - page 297

    Er rors 101-1830 -001 Issu e 1.0 297 60001 1 Er ro r T ype 1 - W arn ing Module T ype 601 - Au to_Init on reboo t Status Mes sag e W ARNING: APS Rebo ot_Init sta rted logger manag er Status Da ta 1 Logg er man ager w as no t alread y star ted in initta b Effect No ef fect; the system can rec over from this er ror . Description This err or warns you ...

  • Lucent Technologies AP-3 - page 298

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 298 101-1830 -001 Issu e 1.0 600012 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: Fa iled fsck /export /home0 Status Da ta 1 /expo rt/ho me0 fa iled f sck, re turn c od e =nn Effect Auto_Ini t aborts, not hing starts and there is no producti ...

  • Lucent Technologies AP-3 - page 299

    Er rors 101-1830 -001 Issu e 1.0 299 4. If the previous ste ps don’t solve the probl em, escalate t his problem t o the next level of support. 37 A signal was cau ght during pr ocessing 39 Unc orrec ta ble er rors d etect ed - te rminat e imme diate ly 40 For root, same a s 0. T able 21 . fsck Re turn Code s (Continu ed) Return Code Desc ription ...

  • Lucent Technologies AP-3 - page 300

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 300 101-1830 -001 Issu e 1.0 600013 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: Fa iled fsck /export /home1 Status Da ta 1 /expo rt/ho me1 fa iled f sck, re turn c od e = 34 Effect Auto_Ini t aborts, not hing starts and there is no product ...

  • Lucent Technologies AP-3 - page 301

    Er rors 101-1830 -001 Issu e 1.0 301 600014 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: Fa iled fsck /expor t/home2 Status Da ta 1 /expo rt/ho me2 fa iled f sck, re turn c od e = 34 Effect Auto_Ini t aborts, not hing starts and there is no production . Description An fs ck was r un on /exp ...

  • Lucent Technologies AP-3 - page 302

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 302 101-1830 -001 Issu e 1.0 600015 Error T ype 1 - W arn ing Module T ype 601 - Di sk full Status Mes sag e W ARN ING : APS: <file s ystem name > is 95 % ful l Status Da ta 1 — Effect Disk I/O ma y be slower , but n ot noticeabl y . Description The fil e system was chec ked and is gre ater ...

  • Lucent Technologies AP-3 - page 303

    Er rors 101-1830 -001 Issu e 1.0 303 600016 Error T ype 2 - Error Module T ype 601 - Di sk full Status Mes sag e ERR O R: A PS : <fil e syst em na m e> is 9 2% ful l Status Da ta 1 — Effect Disk I/O ma y be slower , but n ot noticeabl y . Description The fil e system was chec ked and is 90- 94% full. Resolution 1. Look at the name d file s ...

  • Lucent Technologies AP-3 - page 304

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 304 101-1830 -001 Issu e 1.0 600017 Error T ype 1 - W arn ing Module T ype 601 - Di sk full Status Mes sag e W ARNING: APS:< file syste m name> is 88% full Status Da ta 1 — Effect Disk I/O ma y be slower , but n ot noticeabl y . Description The fil e system was chec ked and is 80- 89% full. ...

  • Lucent Technologies AP-3 - page 305

    Er rors 101-1830 -001 Issu e 1.0 305 600018 Error T ype 3 - Informat io nal Module T ype 601 - Di sk full Status Mes sag e INFO: APS: <f ile system na me> is 75% full Status Da ta 1 — Effect No ef fect. This a larm is infor mational onl y . Description The fil e system was chec ked and is 70- 79% full. Resolution 1. Look at the name d file ...

  • Lucent Technologies AP-3 - page 306

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 306 101-1830 -001 Issu e 1.0 600019 Error T ype 1 - W arn ing Module T ype 601 - Di sk full Status Mes sag e W ARNING: APS: / var over 95% fu ll Status Da ta 1 — Effect Disk I/O ma y be slower , but n ot noticeabl y . Description /var was checked and was o ver 95% full, s o the /cron/log file was ...

  • Lucent Technologies AP-3 - page 307

    Er rors 101-1830 -001 Issu e 1.0 307 600020 Error T ype 4 - Po int of In terest Module T ype 601 - Di sk full Status Mes sag e POI: A PS: /va r is sti ll over 9 5% full Status Da ta 1 aborti ng Reboot_Init Effect Disk I/O ma y be slower , but n ot noticeabl y . Description The s ystem w ill no t come up co m plete ly until /var is le ss tha n 95% f ...

  • Lucent Technologies AP-3 - page 308

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 308 101-1830 -001 Issu e 1.0 600021 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS:X25 i s not running Status Da ta 1 x.25 no t running, Reboo t_Init aborted Effect Auto_Ini t aborts, not hing starts , and there is no production. Description T ...

  • Lucent Technologies AP-3 - page 309

    Er rors 101-1830 -001 Issu e 1.0 309 600022 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: I nformix is not running Status Da ta 1 Informix not running a fter 30 minute s, aborting Re boot_Init Effect Auto_Ini t aborts, not hing starts , and there is no productio n. Description Informix did n ...

  • Lucent Technologies AP-3 - page 310

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 310 101-1830 -001 Issu e 1.0 600023 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: cr on is not runnin g Status Da ta 1 Abor ting Re boot _Init Effect Auto_Ini t aborts, not hing starts , and there is no productio n. Description Checked for c ...

  • Lucent Technologies AP-3 - page 311

    Er rors 101-1830 -001 Issu e 1.0 311 600024 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: I nit_app_mgr fail ed Status Da ta 1 Abor ting Re boot _Init Effect Auto_Ini t aborts, not hing starts and there is no production . Description Reboot_In it was trie d to execute t he Init_app_ mgr scri ...

  • Lucent Technologies AP-3 - page 312

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 312 101-1830 -001 Issu e 1.0 600025 Error T ype 3 - Informat io nal Module T ype 601 - Au to_Init on reboo t Status Mes sag e INFO: APS: i ssg_appmgr_pid wa s removed Status Da ta 1 value of issg_appmgr_pi d was -1, so remov ed it in order t o start app m gr Effect No ef fect. This a larm is infor ...

  • Lucent Technologies AP-3 - page 313

    Er rors 101-1830 -001 Issu e 1.0 313 600026 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: ap plication manage r not running Status Da ta 1 Abor ting I nit_a pp_mg r Effect No script s start, no pro duction. Description The appli cation manager ( issg_appmgr) pr ocess is not ru nning. Resolut ...

  • Lucent Technologies AP-3 - page 314

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 314 101-1830 -001 Issu e 1.0 600027 Error T ype 3 - Informat io nal Module T ype 601 - Au to_Init on reboo t Status Mes sag e INFO: APS: Rebo ot_Init/Init _app_mgr fini shed successf ully Status Da ta 1 — Effect No ef fect. This a larm is infor mational onl y . Description The Reboot_ Init and In ...

  • Lucent Technologies AP-3 - page 315

    Er rors 101-1830 -001 Issu e 1.0 315 600028 Error T ype 4 - Po int of In terest Module T ype 601 - Au to_Init on reboo t Status Mes sag e POI: APS: No l inks in servic e (NORMAL state) Status Da ta 1 Applicat ions may not ru n properly . Check X.25 links . Effect If lin ks don’t come into servic e before the applicatio n starts, th e applica tion ...

  • Lucent Technologies AP-3 - page 316

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 316 101-1830 -001 Issu e 1.0 600029 Error T ype 3 - Informat io nal Module T ype 600 - AP Sheartbeat or 60 1 - Auto_Init on reboot Status Mes sag e INFO: APS: 1 x 25 link(s) cu rrently up or INFO: APS: 1 TCP/ IP link(s) currently up Status Da ta 1 — Effect No ef fect. This a larm is infor mationa ...

  • Lucent Technologies AP-3 - page 317

    Er rors 101-1830 -001 Issu e 1.0 317 600030 Error T ype 1 - W arn ing Module T ype 605 - Backu p failure Status Mes sag e ERROR: T ape failed to rewind. Status Da ta 1 Chec k to se e if tape is in ta pe dr iv e. Effect No backup made . Description Backup oper ation has fa iled. There i s no tape in d rive. Resolution 1. Make su re th ere i s a t ap ...

  • Lucent Technologies AP-3 - page 318

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 318 101-1830 -001 Issu e 1.0 600031 Error T ype 1 - W arn ing Module T ype 605 - Backu p failure Status Mes sag e ERROR: Failed to create vi rtual table o f contents fo r disk n . (Disk n c an be either 0, 1, or 2.) Status Da ta 1 Check /var /sys_backup.l og for exact er ror message. Effect No back ...

  • Lucent Technologies AP-3 - page 319

    Er rors 101-1830 -001 Issu e 1.0 319 600032 Error T ype 1 - W arn ing Module T ype 605 - Backu p failure Status Mes sag e ERROR: Failed to tar inst all scripts to tape. Status Da ta 1 Chec k to ma ke sur e tape is in tap e driv e. Effect No backup made . Description Backup oper ation has fa iled. T ape was ejec ted premat urely . Resolution 1. P us ...

  • Lucent Technologies AP-3 - page 320

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 320 101-1830 -001 Issu e 1.0 600033 Error T ype 1 - W arn ing Module T ype 605 - Backu p failure Status Mes sag e ERROR: APS: Failed to backup xxx file syste m. xxx is a fil e s ystem w ith a name si mila r to the e xamp le for th e root file system be low: /dev/ds k/c0t0d0s0 Status Da ta 1 Check / ...

  • Lucent Technologies AP-3 - page 321

    Er rors 101-1830 -001 Issu e 1.0 321 600034 Error T ype 2 - Error Module T ype 601 - SS7 ch eck Status Mes sag e APS: No SS7 li nks in servi ce Status Da ta 1 — Effect Outcall s cannot be made to HLR. Inbound cal ls are deposit ed to mailboxes , but cannot be del ivered. Description There wer e no SS7 links dete rmined to be in service. Resolutio ...

  • Lucent Technologies AP-3 - page 322

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 322 101-1830 -001 Issu e 1.0 600035 Error T ype 3 - Informat io nal Module T ype 601 - SS7 ch eck Status Mes sag e APS: $NUM SS7 link (s) current ly in service. Status Da ta 1 — Effect No ef fect. This a larm is infor mational onl y . Description Ther e are NUM SS7 link(s) foun d to be in ser vic ...

  • Lucent Technologies AP-3 - page 323

    Er rors 101-1830 -001 Issu e 1.0 323 600037 Error T ype 2 - Error Module T ype 601 - SS7 ch eck Status Mes sag e APS: erro r when running i ssg_ss7_stac kload Status Da ta 1 — Effect Outcall s cannot be made to HLR. Inbound cal ls are deposit ed to mailboxes , but cannot be del ivered. Description There was an error when runni ng the command is s ...

  • Lucent Technologies AP-3 - page 324

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 324 101-1830 -001 Issu e 1.0 600038 Error T ype 1 - W arn ing Module T ype 601 - SS7 ch eck Status Mes sag e APS: SS7 ala rm logger is not r unning Status Da ta 1 — Effect No SS7 alar ms are capture d in the status log file. Description An attempt to start t he issg_ss7alar m logger fail ed. Reso ...

  • Lucent Technologies AP-3 - page 325

    Er rors 101-1830 -001 Issu e 1.0 325 600039 Error T ype 4 - POI Module T ype 600 - AP Sheartbeat or 60 1 - Auto_Init Status Mes sag e When genera ted by module 600 , the status message is: SS7GW HB check failed When genera ted by module 601 , the status message is: APS:SS7 Gatewa y startup fa iled Status Da ta 1 Gateway pr ocess not in p rocess tab ...

  • Lucent Technologies AP-3 - page 326

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 326 101-1830 -001 Issu e 1.0 600040 Error T ype 4 - Po int of In terest Module T ype 601 - cmdq_r em.sql failed Status Mes sag e cmdq_re m.sql failed Status Da ta 1 Reboot_In it, Aborting Re boot_Init Effect Aborts st arting the applicatio n manager . All other processe s are start ed. Description ...

  • Lucent Technologies AP-3 - page 327

    Er rors 101-1830 -001 Issu e 1.0 327 600041 Error T ype 4 - Po int of In terest Module T ype 600- APS heartbeat or 601 - TCP/IP link s tatus Status Mes sag e POI: APS: No TCP/ IP links in ser vice Status Da ta 1 Applicat ions may not ru n properly . Check X.25 links . Effect If lin ks don’t come into servic e before the applicatio n starts, th e ...

  • Lucent Technologies AP-3 - page 328

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 328 101-1830 -001 Issu e 1.0 600042 Error T ype 1 - W arn ing 2 - Error 3 - W arn ing 4 - Po int of In terest Module T ype 600 - AP Sheartbeat Status Da ta 1 The stat us data filed c ontains one of these messages: 4 - DB > 85% full 2 - DB > 75% full 3 - DB > 60% full 4 - DB < 60% full S ...

  • Lucent Technologies AP-3 - page 329

    Er rors 101-1830 -001 Issu e 1.0 329 Resolution Data needs to be r emove d from the d atab as e. 1. Escalat e this problem i f you are uncer tain of how t o resize the databas e. 2. Contact t echnical su pport to dete rmine if you need to drop or recrea te the appli cation’ s journaling log. 3. If the ab ove s tep fa ils, esc alate this pr oble m ...

  • Lucent Technologies AP-3 - page 330

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 330 101-1830 -001 Issu e 1.0 700001 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Unknown host Status Data 1 PID=[%d] er rno=[%d] addr ess=[%s] where PID is t he process ID, err no is the UNIX error number , and addre ss is the HOST/ IP address. Effect Serv ice wi ...

  • Lucent Technologies AP-3 - page 331

    Er rors 101-1830 -001 Issu e 1.0 331 700002 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Socket error Status Data 1 PID= [%d] e rrno= [%d] wher e PID is the pr ocess ID and errno is the UN IX e rr or num ber . Effect Serv ice wi ll be a f f ected . Description This err or occurs when APS is not able to create a so ...

  • Lucent Technologies AP-3 - page 332

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 332 101-1830 -001 Issu e 1.0 700003 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Unable t o set socket option Status Data 1 PID=[%d] SNDBUF=[ %d], errno=[%d] PID=[%d] RCVBUF=[%d], e rrno=[%d] PID=[%d] KEEP ALIVE=[%d], errno=[%d] PID=[%d] LI NGER =[%d] , errno=[%d] ...

  • Lucent Technologies AP-3 - page 333

    Er rors 101-1830 -001 Issu e 1.0 333 700004 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Connect error Status Data 1 PID=[%d] er rno=[%d] addr ess=[%s] where PID is t he process ID, err no is the UNIX error number , and addre ss is the HOST/ IP address. Effect Serv ice wi ll be a f f ected . Description This err o ...

  • Lucent Technologies AP-3 - page 334

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 334 101-1830 -001 Issu e 1.0 700005 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Read socket error Status Data 1 PID=[%d] at tempted to read [%d] bytes fr om socket [%d] fail ed errno [%d] wher e PID is the pr ocess ID and errno is the UN IX e rr or num ber . Effe ...

  • Lucent Technologies AP-3 - page 335

    Er rors 101-1830 -001 Issu e 1.0 335 700006 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: W rite soc ket error Status Data 1 pid= [%d] total bytes= [ %d] socket= [%d] errno= [%d] where pid is the proce ss ID, total b ytes is the total bytes the process attem pted t o wri te, so cket i s the socket numb er wr itten ...

  • Lucent Technologies AP-3 - page 336

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 336 101-1830 -001 Issu e 1.0 700007 Error T ype 1 - W arn ing Module T ype 100 - TCP/I P errors Status Mes sag e W ARNING: Oper ation on an unop ened socket Status Data 1 Socket i s already cl osed (or never opened) Effect No ef fect, the s ystem can recov er from this e rror . Description This err ...

  • Lucent Technologies AP-3 - page 337

    Er rors 101-1830 -001 Issu e 1.0 337 700008 Error T ype 2 - Error Module T ype 100 - TCP/I P errors Status Mes sag e ERROR: Unable t o bind Status Data 1 Unable to bind to port [%d] ERRNO= [%d] where por t is the port t o bind to and er rno is the UNIX sys tem error number . Effect Serv ice wi ll be a f f ected . Description APS is unab le to es ta ...

  • Lucent Technologies AP-3 - page 338

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 338 101-1830 -001 Issu e 1.0 Passive Alarm Monitoring The APS 4.1 pl atform support s a passive ala rm monitoring feat ure. W ith this f eature, an app lication us ing the APS plat form can connec t to the APS platf orm, lo ok at the APS statu s log file , and repo rt the errors b ack to the appl i ...

  • Lucent Technologies AP-3 - page 339

    Er rors 101-1830 -001 Issu e 1.0 339 EAP-related Errors EAP (exter nal applica tion processor) errors ar e errors on t he Sierra/CA. Events may occur on th e APS that are no t perceived as errors unti l the event re aches the Sie rra/CA. This se ction discu sses such err ors. The stat us log file on the Sierra /CA collects EAP-related err ors in th ...

  • Lucent Technologies AP-3 - page 340

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 340 101-1830 -001 Issu e 1.0 T able 22 describe s the key field s in the Figur e 78. T able 23 Describes the task ID po rtion in T able 22. T able 23. EAP T ask IDs T able 22. Ke y Fields in an EAP Alarm Offs et Desc ript ion A ctio n 02 T ask ID Use T able 23 to identi fy the task. 08 and 09 Subco ...

  • Lucent Technologies AP-3 - page 341

    Er rors 101-1830 -001 Issu e 1.0 341 A1 File ta sk 3 A2 X.25 task A3 OCL task A4 ASA task (As pen System Administrat ion, now OSA, Octel System Admini st ra tion) A5 SMDI start task A6 Unused A7 SMDI end task A8 IMS task (now GMS, global Messagi ng Noti fi cation System) A9 IM S task AA Overflow eval uation task AB Simplifi ed protocol task A5 SMS ...

  • Lucent Technologies AP-3 - page 342

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 342 101-1830 -001 Issu e 1.0 T a ble 24 d e scrib es the data fi elds f or a st atus 2 4 -type error . T able 24. Data Fields in Status Code 24 Offs et F ield Nam e Fi eld Va l u e Field Des cription 08 Subcode 01 Data exception error 02 Function error 03 Protocol error 04 Session e rror 05 Time ou ...

  • Lucent Technologies AP-3 - page 343

    Er rors 101-1830 -001 Issu e 1.0 343 C6 All LUNs (logic unit numbers ) for the r equested applica tion number ar e busy . C7 Low LUNs for t he requested applica tion number C* Buff er overflo w : LUN wi ll be cleare d C9 LUN is clea red CA Opera tion tim e-out : LUN w ill be clear ed CB LUN already open: ACL_ CLOSE must be ca lled first CC ACL_INI ...

  • Lucent Technologies AP-3 - page 344

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 344 101-1830 -001 Issu e 1.0 Resolvi ng EAP- re l ated Erro rs If you en counter a st atus-code 24 e rror: 1. Decode al l signific ant bytes as d escribed in T ab le 1. 2. For stat us codes 24 wit h subcodes 01 t hrough 04, conta ct the Lucent OMD T echnica l As si st anc e Center at 1 -40 8-9 22-1 ...

  • Lucent Technologies AP-3 - page 345

    Er rors 101-1830 -001 Issu e 1.0 345 a. Make sure that the X.25 link is connected to the main distri bution boar d on the Sie rra/CA. Recall that J48 co nnects to X.25 por t 0 and J47 conne cts to X.25 port 1. b. N otify th e EA P admi nistra tor th at the X.25 li nk ha s faile d at the phys ical leve l, even i f con necti ng the link in s tep a . ...

  • Lucent Technologies AP-3 - page 346

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 346 101-1830 -001 Issu e 1.0 TCAP Errors There ar e three type s of TCAP errors tha t are being i mplemented as pa rt of the APS 4 .1 release. The se are n TCAP Return Cod e Errors n Access Deni ed Reasons n General TCAP error s Thes e erro rs are record ed in cm d_j r _ log ta ble. All of these ar ...

  • Lucent Technologies AP-3 - page 347

    Er rors 101-1830 -001 Issu e 1.0 347 TCAP errors ar e also repor ted in the ap plicati ons’ s j ournaling log as entry type 5. Se e the documentat ion that came wit h the applic ation. TCAP Access Denied Reasons T able 26 provides the error number i n hex and a des cription fo r the various reasons that a TCAP was denied a ccess. TCAP Non-request ...

  • Lucent Technologies AP-3 - page 348

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 348 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 349

    101-1830 -001 Issu e 1.0 349 A Enhanced Reporting Platform This appendi x discu sse s the Enhan ced Reporting Platf orm (ERP) and associa ted software . This appendix contains the following se ctions: n Overview n Assembling the ERP Hardware n Cabling t he ERP System n Instal ling and Administe ring ERP n Executin g ERP Software n Error Log ging n ...

  • Lucent Technologies AP-3 - page 350

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 350 101-1830 -001 Issu e 1.0 This direc tory is a rep ository for all repor ts. The second ary APSs will not house any reports g enerated by the E RP , but will hold any repor ts that APS generat es. Batch pro cessing incl udes creati on of a bill ing report an d several call activi ty reports i niti ...

  • Lucent Technologies AP-3 - page 351

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 351 This cyc le is repeat ed every nigh t shortly af ter midnight. The tables on the E RP are c omple tely re fresh e d each time . Administrat ion Administration of the ERP software oc curs at instal lation. Duri ng instal lation, the technician must administer: n Primary a nd secondary r ol ...

  • Lucent Technologies AP-3 - page 352

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 352 101-1830 -001 Issu e 1.0 Assembling the ERP Hardware Check cir cuit card pl acement in th e ERP workstation be fore loading softwar e. ERP software req uires that c ir cui t cards in the ERP workst at ion be in speci fic slots. Fi gure 79 shows the card arrange ment in a Sun Ultra 5 syste m. Figu ...

  • Lucent Technologies AP-3 - page 353

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 353 Cabling the ERP System Cabl e the E RP , th e APS a nd th e LAN s witch to geth er . 1. P ositio n the APS sy stem , the ER P sy st em, a nd th e Bay st ack network s witch. 2. Attach a ll power cables. 3. C onne ct the ERP w orkst ation to the L AN swi tch in port 1 , connect the APS sys ...

  • Lucent Technologies AP-3 - page 354

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 354 101-1830 -001 Issu e 1.0 Inst alling an d Administeri ng ERP Insta llat io n of th e ER P is perf orme d in thre e par ts: n Phas e I Loads an i nstallati on tape (made in t he Lucent Lab fr om a comple tely configure d ERP) on to the ERP n Phas e II Scripts run on the ERP and APS(s) to set up dy ...

  • Lucent Technologies AP-3 - page 355

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 355 n The name and IP address of the default ro uter n The t ime zo ne of the ERP syst em n The lice nse inform ation for th e Informix software n The lice nse informati on of the Inf ormix ESQL/C soft ware n The l icens e i nform a tion of the C+ + ESQ L/C s oftware Loading the ERP System Lo ...

  • Lucent Technologies AP-3 - page 356

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 356 101-1830 -001 Issu e 1.0 10. From the # p rompt enter ./ erp_install _fs Answer the prompts as descri be d below . Proceed with installation (yes/no) yes Enter the type of operation to be perfo rmed: 1 After r unning for approxi mately 30 minutes, you will be prompt ed for the fo llowing inform a ...

  • Lucent Technologies AP-3 - page 357

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 357 Inst alling the License Informat ion This secti on installs the C compiler used by ERP . 1. E nter /var/resto re_files/c ++_lic to run the c++_lic fi le. Y ou will see the following me ssages. W ait abou t 30 seconds fo r the License Installation T ool wi ndow to display as shown in Figur ...

  • Lucent Technologies AP-3 - page 358

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 358 101-1830 -001 Issu e 1.0 3. T he wi ndow ti tled l it: Ad d licen se to be insta ll ed screen display s as shown in Fi gure 83. Figure 83. Add Li cense Window 4. Click on De mo license and se t i t to No . 5. In the Fe ature Name option, s elect WS Co m pil er C S P ARC 6. In the RTU (R ights to ...

  • Lucent Technologies AP-3 - page 359

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 359 10. W ork thro ugh steps 5 th rough 9 again, thi s time selectin g the seco nd fea ture n ame, W S com piler C++ Sp arc. 1 1. If success ful at step 9, c lick on Close . 12. Go back to main screen . 13. Click on Install . The scree n named “Get li t: informationa l message window” dis ...

  • Lucent Technologies AP-3 - page 360

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 360 101-1830 -001 Issu e 1.0 Phase II Inst allation Procedures Both the AP S syst em an d the ER P syst em m ust be ad min istere d afte r the ERP software tape has been loaded in phase I. Perf orm phase I prior to the followi ng procedures . The f ollow i ng log files r e flect t he act ivitie s tha ...

  • Lucent Technologies AP-3 - page 361

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 361 9. Log in to the ERP as root 10. At the # p rompt, enter /var/e rp_ins tall/ erp_in stall _b 1 1. Y ou w i ll be a sked f or the fo llow ing info rmat ion: n Are there 1, 2, 3, or 4 APSs? n The syste m name and IP addre ss of the pri mary APS n The syste m name and IP addre ss of any seco ...

  • Lucent Technologies AP-3 - page 362

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 362 101-1830 -001 Issu e 1.0 Phase III Inst allati on Procedu res Field te chnici ans use this pr ocedur e afte r Pha se I and Pha se II inst alla tion procedur es are complet e. Phase III consists of administering r eports to run on th e ERP and/or the APS(s). This is done by editing an ERP configur ...

  • Lucent Technologies AP-3 - page 363

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 363 # APS HOSTNAMES. One entry for each APS sy stem. The entry "APS_PRI_HOSTNAME" # must specify the primary aps and there s hould be an "APS_SEC_HOSTNAME" # entry for each secondary aps. May be in any order. # APS_PRI_HOSTNAME = aps_primary #APS_SEC_HOSTNAME = aps_seconda ...

  • Lucent Technologies AP-3 - page 364

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 364 101-1830 -001 Issu e 1.0 Figure 85. Example erp.cfg file, APS portion __________________________________________ ____________________________ ########### start of APS erp.cfg file #### ###### # list the reports that will be executed b y the machine on which # this config file resides. Typically, ...

  • Lucent Technologies AP-3 - page 365

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 365 REPORT_EXEC There m ust be a n en tr y he re (with com ment “#” removed) fo r e ach report that i s to e xecute on a given machine . A given re port s hould n ot be r un on both the ERP and APS machine s, but if a repor t will not b e run on the ERP , it may ( and probably s hould) ru ...

  • Lucent Technologies AP-3 - page 366

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 366 101-1830 -001 Issu e 1.0 testin g, but a larger n umber resul ts in fe wer me ssages going to the lo g file. LOG_SEV _LEVEL This par ameter will inf luence the qua ntity of message s that get l ogged to the log files. It may take one of t he following valu es in order o f decreas ing severity - L ...

  • Lucent Technologies AP-3 - page 367

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 367 n Directo ry: ~issg/ issg_main/is sg_lib/libre ports/cmd_rep orts/ Repo rt Ex ecuta bles: cmd repor t1 - dail y inco ming c alls re port cmdrep ort2 - daily out going calls report cmdrep ort3 - daily incoming/outg oing calls r eport cmdreport 4- daily hour ly report. Run s once per day bu ...

  • Lucent Technologies AP-3 - page 368

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 368 101-1830 -001 Issu e 1.0 Administeri ng Report s Per fo rm th e follow ing st eps to admi ni ster th e ER P syste m to run repo rt s: 1. Decide whi ch billing and repo rt executabl es will be run on the APS machine( s) and which ex ecutables wil l be run on th e ERP . The same fu nctional re port ...

  • Lucent Technologies AP-3 - page 369

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 369 ~issg/ issg_main/is sg_reports/ or ~issg/iss g_main/issg_b illing direct ories on the A PS on which the re port is run. If a re port is to run on the ERP , report output (mer ged data in t he case of multiple-APS) will be placed on the primary APS i n its origina l location. 3. Edit th e ...

  • Lucent Technologies AP-3 - page 370

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 370 101-1830 -001 Issu e 1.0 Uninst all Procedures T o uninstall the APS side: 1. Log in as root on the APS m achine. 2. Ente r /var/r estor e_files/ erp_aps_uninst all rm /var /resto re_files /erp_aps_uninst all T o uninstall the ERP side: 1. Log in as root on the ERP m achine. 2. Ente r /erp _inst ...

  • Lucent Technologies AP-3 - page 371

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 371 Executing ERP Software Once confi gured and admin istered, the ERP s oftware will run on its own and w ithou t inte rven ti on. H o weve r , rem ember the f o llowi ng po i n ts to ensu re tha t th e ER P softwa re run s opti m ally: n The ERP and APS sys tems must be time-sy nchronized. ...

  • Lucent Technologies AP-3 - page 372

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 372 101-1830 -001 Issu e 1.0 Error Logging The ERP subsy stem has its o wn logging faci lity that uses the Sola ris syslog da emon. All message s are logged a ccording to the r ules below: n Log message s that origi nate from a repor t executabl e that is execute d on the APS will be logged to the AP ...

  • Lucent Technologies AP-3 - page 373

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 373 CODE PROCESS NAME emgr erpm gr amgr ap smg r eload er ploa d crdb cr _er p_db admump apsdu m p ...

  • Lucent Technologies AP-3 - page 374

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 374 101-1830 -001 Issu e 1.0 Backup and Restore Proced ures Backup and r estore procedu res for the ERP machine may be per formed manually at any time. There is no auto matic bac kup sched ule for the ERP machine. Backing Up ERP Full Backup Use this procedure to backup the ERP system. 1. Place a t ap ...

  • Lucent Technologies AP-3 - page 375

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 375 3. When you see “Initializi ng Memory” on the s creen, press t he ST OP+a keys simultan eously . 4. From the pr ompt “OK”, enter boot cdr om The syste m will boot int o OpenW in and st art the nor m al Solaris insta ll. 5. Ignore t he Solaris I nstallation P rogram dialogu e box. ...

  • Lucent Technologies AP-3 - page 376

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 376 101-1830 -001 Issu e 1.0 12. The sy stem begins to reboot. When y ou see “Initial izing Memory” on th e screen, pre ss the St op+a keys simul taneously . 13. T ake the Solaris CD out of the CDROM driv e. 14. At the OK pr ompt, enter boot . Y ou should have a fully fun ctioning ERP sys tem at ...

  • Lucent Technologies AP-3 - page 377

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 377 T roubleshoo ting ERP Because r obus t failover s cen arios are not par t of the requ ir ement s for this releas e, this section describes s ome of the step s that an enginee r should take for general tr oubleshooting an d to gather i nformation fo r ERP support if the ERP behav es errati ...

  • Lucent Technologies AP-3 - page 378

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 378 101-1830 -001 Issu e 1.0 n Inspe ct /va r/adm /mes sages (incl udes c ron o ut put). n Inspect ~issg/iss g_main/issg_o ut/cron_log. n Inspect /export/home2/Onl i ne/msgs for Infor mix log g in g. ...

  • Lucent Technologies AP-3 - page 379

    Enhanc ed Repo rt ing Platf orm 101-1830 -001 Issu e 1.0 379 Developing Custom Report s The repor t executabl es delivered on the ERP (*.er p filenames i n /export /home0/erp/b in/) must be execu ted on the ERP bec ause they use a logging s tub as a subst itute for the logger manager available on APS but not a vaila ble o n ERP . Si mila rly , the ...

  • Lucent Technologies AP-3 - page 380

    APS (Ap plication Plus Serv er) 4.1 Use rs Guide 380 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 381

    101-1830 -001 Issu e 1.0 381 Glossary , Abbreviations, and Acronyms Numerics 5ESS Sw itch A centra l offi ce switch manuf actured by Luce nt T ec hnologies th at can be integr ated with the Lucent I ntuity syst em. A A1000 A raid de vice manufacture d by Sun ACL Now OCL, Octel c omm and language API Applicatio n-programming i nterface, a s et of fo ...

  • Lucent Technologies AP-3 - page 382

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 382 101-1830 -001 Issu e 1.0 B BITS Building integrated timing supply . A clock, or a clock with an adjunc t, in a build ing that suppli es DS1 and/or composite clo ck timing refere nce to all othe r clocks in t hat buildin g. C CD Com p act di sk CDR Call Deta il Recording CD-ROM Compact dis k-rea ...

  • Lucent Technologies AP-3 - page 383

    101-1830 -001 Issu e 1.0 383 E EAP Exte rnal a pp licat ion pr oces so r , this is wh at the Si erra c alls th e APS o r ERP s ystem . EBCDIC Extended binary coded de cimal inter change code e-mail electr onic mail ERP Enhanced Re porting Plat form, an APS appli cation that se nds report da ta to another machine for process ing. ESD Electr ostatic ...

  • Lucent Technologies AP-3 - page 384

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 384 101-1830 -001 Issu e 1.0 H HLR Home locat ion registe r , the databas e in charge of managing m obil e phone subscr ibers that stores a perman ent cop y of the s ubs cript ion in form ation, and som e locat ion in form ation , to e nable c all r out- ing to whe re the subscr iber is loc ated. H ...

  • Lucent Technologies AP-3 - page 385

    101-1830 -001 Issu e 1.0 385 IVR Interact ive voice respon se, a special ized computer that accept s input from eith er a telepho ne key- pad or t he caller’ s voi ce, and on the b asis of that input, uses synt hesized voic e or prerecorde d mes- sages to offer c aller s c hoice s on h ow they can c omple te the p u rpos e of th eir cal l. J Jour ...

  • Lucent Technologies AP-3 - page 386

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 386 101-1830 -001 Issu e 1.0 N NGW Noti ficati on ga te way O OCL Octe l comm a nd lan guage OMD Octel Mess aging Division, a division of the Business Communica tions Services portion of Luc ent T echnologies. OS Op eratin g sys tem OSA Octel sy stem administrat ion OSS Operati onal syst em support ...

  • Lucent Technologies AP-3 - page 387

    101-1830 -001 Issu e 1.0 387 R RAID Redundant array of inexpe nsive dis ks, severa l disks i n a single housing wr itten to so tha t if one dis k is los t, no da ta is lo st . RMPP Remote mail box provision ing protocol RNA Ring no ans wer RSC Regional Service Cente r , a group of Luce nt support engin eers S SAN number Service access number SCCP S ...

  • Lucent Technologies AP-3 - page 388

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 388 101-1830 -001 Issu e 1.0 SMT System m anag ement terminal SMTP Simple mai l transfer pro tocol Snoop A SunOS command to trace TCAP messag es SPC Signali ng point code SP number Service point number SPI Signali ng path indic ator SQL System query language SS7 Signali ng System 7, an out -of-band ...

  • Lucent Technologies AP-3 - page 389

    101-1830 -001 Issu e 1.0 389 TNPP T elocator net work paging pr otocol U UNI User -network in terface, th e point at which us ers connect to the network . V vi V isual display e ditor , the ASCII ed itor prefer red by many who use SunOS and UNIX. VIS V oic e inform ation syste m VMS V oice messaging sy stem, used interc hangeably wit h VPM. VPM V o ...

  • Lucent Technologies AP-3 - page 390

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 390 101-1830 -001 Issu e 1.0 ...

  • Lucent Technologies AP-3 - page 391

    391 101-1830 -001 Issu e 1.0 Index A A1000 powering up , 47 raid , 39 access deni ed reasons , 345 adding a new HLR point code , 145 address ing with X.25 tool , 67 admi niste ring ERP software , 34 9 hostnames , 11 5 SPC , 148 TCP/IP addres ses , 115 administ rative scr ipts , 101 ala rms , 32 , 35 200001 , 243 200005 , 184 , 24 4 200008 , 245 400 ...

  • Lucent Technologies AP-3 - page 392

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 392 101-1830 -001 Issu e 1.0 5230003 , 282 5230005 , 283 5230008 , 284 5230012 , 285 524027 , 286 600000 , 288 600001 , 289 600002 , 291 600003 , 293 600005 , 294 600010 , 295 60001 1 , 296 600012 , 297 600013 , 299 600014 , 300 600015 , 301 600016 , 302 600017 , 303 600018 , 304 600019 , 305 60002 ...

  • Lucent Technologies AP-3 - page 393

    393 101-1830 -001 Issu e 1.0 cre ating , 11 9 starti ng , 122 starti ng au tomati cally , 121 start ing manually , 122 stoppin g , 122 APS 4.0 feat ures , 32 initi alization o n reboot , 30 , 32 packagin g , 32 passive alarm monitori ng , 32 Solaris upgrade , 32 SS7 inter face , 29 APS 4.1 backward c ompatibil ity , 25 comm uni catio n prot oco l s ...

  • Lucent Technologies AP-3 - page 394

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 394 101-1830 -001 Issu e 1.0 backups , 21 7 APS data only , 21 6 APS only , 216 auto matic , 214 between di ffer ent hardware configu rations , 213 data , 213 ERP , 372 Info rmix , 217 logs , 214 manual , 214 media used , 213 outpu t redirection , 214 sequent ial , 214 time , 214 billi ng report cr ...

  • Lucent Technologies AP-3 - page 395

    395 101-1830 -001 Issu e 1.0 Reboot_In it start , 30 8 to 309 rm issg_appmgr _key , 203 rm issg_l ogg er_ ci r_file , 11 4 rm issg_l ogg er_ seq _file , 114 SEQ=ON , 230 shutdown - y -i0 -g0 , 178 to 180 snoop command , 191 , 20 1 SQL , 11 0 SQL commands wit h output , 165 SQL commands wit hout output , 164 su , 62 , 11 4 , 129 , 180 , 186 , 188 , ...

  • Lucent Technologies AP-3 - page 396

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 396 101-1830 -001 Issu e 1.0 200007 , 238 200009 , 238 200014 , 238 4 , 238 501005 , 238 501007 , 238 501009 , 238 50101 1 , 238 501014 , 238 501015 , 238 501016 , 238 501017 , 238 503000 , 238 503002 , 238 503003 , 238 503005 , 238 503007 , 238 503008 , 238 505003 , 238 505004 , 238 505006 , 238 5 ...

  • Lucent Technologies AP-3 - page 397

    397 101-1830 -001 Issu e 1.0 EBCDIC status log , 22 9 to 230 electr onic versio n of this book , 21 ending an Informix s ession , 11 3 ERP , 30 , 347 admini stration , 34 9 advantag es , 30 and IC C appl ication , 28 backups , 37 2 cabli ng , 351 components , 28 configu ration fil e modifications , 360 connecti vity , 348 error l ogging , 370 execu ...

  • Lucent Technologies AP-3 - page 398

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 398 101-1830 -001 Issu e 1.0 hostnames ,administering , 115 I image res to re , 215 impleme nting a passive alarm monitori ng syste m , 230 Impo r t item , 107 import ing data applica tion specif ic utilit ies , 138 overvie w , 138 scr ipts , 138 incoming s cripts , 101 Info rmix , 32 , 217 manuals ...

  • Lucent Technologies AP-3 - page 399

    399 101-1830 -001 Issu e 1.0 logger ma nager , 104 overvie w , 159 start ing and stoppi ng , 104 , 159 start ing and stoppi ng manually , 104 sta tus , 159 M manual bac kups , 214 manually starting a s cript group or applica tion , 122 measurin g system perfor mance , 107 menu in terface , 83 MicroL egend interf ace , 32 modify ing cron t asks , 16 ...

  • Lucent Technologies AP-3 - page 400

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 400 101-1830 -001 Issu e 1.0 Auto R estar t Opti o n , 101 buttons at bottom , 102 descri ption , 92 Disable option , 100 HLR Server o ptions , 98 OSA Server o ptions , 97 Script T ype option , 101 server Enable options , 94 SMPP options , 96 SS7 Enable options , 99 T ype 40 Mailbox Number , 101 pr ...

  • Lucent Technologies AP-3 - page 401

    401 101-1830 -001 Issu e 1.0 cre ating , 11 9 deleti ng a scri pt fr om , 125 a scri pt gr oup , 125 shutti ng down , 126 start ing and stoppi ng , 122 start ing manually , 122 stoppin g , 122 script informat ion , 89 , 171 viewing , 16 9 Script me nu Dele te item , 86 New item , 86 Open item , 86 Print i tem , 86 to 87 Quit item , 86 to 87 Script ...

  • Lucent Technologies AP-3 - page 402

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 402 101-1830 -001 Issu e 1.0 APS , 39 configu ring , 54 cons tructs , 27 ERP , 39 ERP in stalla tion tapes , 54 insta lling the app licati on , 54 licen sing , 108 softwar e installa tion , 50 , 54 generat ing reports , 76 placing test call s , 76 upgrade f rom 3.x to 4.1 , 77 softw are tr oubl es ...

  • Lucent Technologies AP-3 - page 403

    403 101-1830 -001 Issu e 1.0 starti ng , 176 start ing and stoppi ng , 176 support , 19 symp toms alarm 6000 0 does not occu r as it shou ld , 200 applica tion is not available , 184 applica tion not avai lable messag e , 184 applica tions on APS can not start , 203 caller s can’t get through , 184 calls will n ot go through the a pplicati on , 2 ...

  • Lucent Technologies AP-3 - page 404

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 404 101-1830 -001 Issu e 1.0 trademar ks , 22 trouble shooting , 104 , 175 call tr acing TCAP messa ges , 20 1 can’ t load SS7 dr iversr , 205 can’ t start a pplication manager , 203 cards an d cables , 186 check ing the stat us of the li nks , 187 cleani ng the tape drive , 21 1 common proce d ...

  • Lucent Technologies AP-3 - page 405

    405 101-1830 -001 Issu e 1.0 W work ing wit h pro files , 134 X X.25 card repla cing , 210 X.25 link n umber , 92 X.25 links configu ring , 45 , 58 , 61 setti ng up , 64 shutti ng down , 180 sta tus , 187 X.25 tool address ing , 67 CUG and faci lities , 68 LAPB/W AN param eters , 66 link e ditor , 64 link modes , 69 routing , 74 speci al , 72 start ...

  • Lucent Technologies AP-3 - page 406

    APS (Ap plicati on Plus Serv er) 4.1 Us e rs Guide 406 101-1830 -001 Issu e 1.0 ...

Manufacturer Lucent Technologies Category Access Point

Documents that we receive from a manufacturer of a Lucent Technologies AP-3 can be divided into several groups. They are, among others:
- Lucent Technologies technical drawings
- AP-3 manuals
- Lucent Technologies product data sheets
- information booklets
- or energy labels Lucent Technologies AP-3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lucent Technologies AP-3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lucent Technologies AP-3, service manual, brief instructions and user manuals Lucent Technologies AP-3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lucent Technologies AP-3.

Similar manuals

A complete manual for the device Lucent Technologies AP-3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lucent Technologies AP-3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lucent Technologies AP-3.

A complete Lucent Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lucent Technologies AP-3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lucent Technologies AP-3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lucent Technologies AP-3, that we can find in the current document
3. Tips how to use the basic functions of the device Lucent Technologies AP-3 - which should help us in our first steps of using Lucent Technologies AP-3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lucent Technologies AP-3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lucent Technologies AP-3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lucent Technologies AP-3?

Use the form below

If you did not solve your problem by using a manual Lucent Technologies AP-3, ask a question using the form below. If a user had a similar problem with Lucent Technologies AP-3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)