English dropdown-ico

Manual Lexmark 032

335 pages 6.49 mb
Download

Go to site of 335

Summary
  • Lexmark 032 - page 1

    X925 User's Guide November 2012 www.lexmark.com Machine type(s): 7541 Model(s): 032, 036, 096 ...

  • Lexmark 032 - page 2

    Conten ts Safe ty infor matio n..... ...... ...... ......... ....... ......... ...... ...... .......... ...... ...... .........1 5 Learn ing a bout t he pr inte r....... .............. .......... .......... .............. ........... .......17 Findi ng in formati on abo ut the p rint er..... ......... ...... ....... ...... .......... ...... ....... ...

  • Lexmark 032 - page 3

    Attac hing c able s..... ...... ........ ...... ...... ..... ......... ...... ..... ...... ......... ..... ...... ...... ........ ....... ..... ... ............ ..... ......6 0 Veri fying pri nter set up... ...... .......... ...... ...... ........... ...... ...... .......... ...... ...... ....... .......... ...... ..... ........ ...... ......61 Pri ...

  • Lexmark 032 - page 4

    Configuring a cus tom name . ....... .......... ....... ...... ....... ....... ...... .......... ....... ....... ....... ...... ....... ....... ... ....... ...... ....... . 89 Paper and specia lty med ia guid eline s. ........ .... ........ ..... ..... ....... ..... ....... ...... .90 Paper gu ide lines ........ ..... ...... ..... ....... ...... .. ...

  • Lexmark 032 - page 5

    Making a q uick copy ...... ....... ....... ...... ....... ....... .......... ...... ....... ....... ...... ....... .......... ....... ...... .. ..... ....... ...... ....... .. 105 Copying u sing the AD F ....... ...... ....... .......... ....... ...... ....... ....... ...... .......... ....... ....... ...... ....... ...... .... ....... ...... .... ...

  • Lexmark 032 - page 6

    Creating an e-mail sh ortc ut usin g the Embed ded Web Server ........ ....... ....... ....... ...... ....... .......... ....... ....... .... .1 1 7 Creating an e-mail sh ortc ut usin g the tou ch screen ..... .......... ....... ...... ....... ....... ...... .......... ....... ....... ..... ..... ..... 117 E-mailing a document. ..... ........ ..... ...

  • Lexmark 032 - page 7

    Sendi ng a fax usi ng shor tcuts .. ...... ....... .......... ....... ...... ....... ....... ...... ........ .......... ...... ...... ........ .. ........ ...... ....... .. 130 Sending a fax usi ng the addr ess boo k ...... ....... ....... ...... ....... ....... .......... ...... ....... ....... ....... ...... ........ .. .......... ...... 130 Cust ...

  • Lexmark 032 - page 8

    Advanced Optio ns ... ....... ...... ....... ....... ...... .......... ....... ....... ....... ...... ....... .......... ....... ...... ....... . ...... ...... ....... ......... 141 Scann ing to a co mputer or fla sh dr ive......................................................142 Scann ing to a compu ter ....... .......... ........ ...... ......... ...

  • Lexmark 032 - page 9

    Standard US B menu ....... ...... ....... .......... ....... ...... ....... ....... ...... ........ .......... ...... ....... ....... ...... ... .... ....... ...... ....... .. 165 Parall el [x] menu .. ...... .......... ....... ....... ...... ....... ....... .......... ...... ........ ...... ...... ........... ....... .... .. .......... ....... ... ...

  • Lexmark 032 - page 10

    Ordering a waste ton er bottl e . ....... ....... ...... .......... ....... ....... ...... ....... ....... .......... ...... ....... ....... ... ....... ...... ....... .. 240 Ordering ADF rep lacement pa rts ....... ....... ...... .......... ....... ....... ...... ....... ....... ....... .......... ....... ...... ... ....... ....... ..... 241 Repla ...

  • Lexmark 032 - page 11

    Change [pap er sour ce] to [cus tom type n ame] ..... ...... ....... ....... .......... ...... ....... ...... ....... ....... ...... .......... .... ...... 263 Change [pap er sour ce] to [cus tom type n ame] lo ad [orient ation] ...... .......... ....... ....... ...... ....... .......... ....... ..... 264 Change [pap er sour ce] to [cus tom str ing ...

  • Lexmark 032 - page 12

    53 Unformatt ed flash detected ............... ........ ...... ...... ........ .......... ...... ....... ....... ...... .......... ....... .. . ....... ....... ..... 270 54 Serial option [ x] error ...... ....... ....... ...... .......... ....... ....... ...... ....... .......... ....... ....... ...... ....... . .. ....... .......... ....... .. 270 ...

  • Lexmark 032 - page 13

    Unexpected page breaks occur ...... ....... ....... ...... ....... .......... ....... ...... ....... ....... .......... ....... ...... ...... ........ ...... ...... 279 Solvi ng cop y pro blems. ............ ...... ........ ....... ........... ....... ........ .......... ........ ....... ....... ........... ... ............ ....279 Copier does n ot ...

  • Lexmark 032 - page 14

    Print irreg ulariti es ...... ....... .......... ....... ...... ....... ....... ...... ....... .......... ....... ....... ...... ....... ....... .......... ...... ....... ....... .. 295 Print is too da rk .......... ....... .......... ...... ....... ....... ...... ....... ....... .......... ...... ....... ....... ...... ....... .......... ....... . ...

  • Lexmark 032 - page 15

    Safety information Connect t he power cord t o a proper ly gro unded e lectric al out let th at is ne ar the product and ea sily acce ssible. Do not p lace or use this product near water o r wet l ocati ons. This pro duct uses a printin g pro cess t hat h eats the print med ia, and the heat may c ause t he media to r elease emiss ions. You must und ...

  • Lexmark 032 - page 16

    CAUTION —SHOCK HA ZARD: Do not use the fax featu re during a lig htning s torm. Do not set up this pr oduct o r make any ele ctric al or cab ling c onnection s, su ch as the f ax fe ature, powe r cord, or tel ephone, during a light ning storm . CAUTION—TIPPI NG HAZARD: Fl oor-mo unted config urations require a dditio nal furni ture for stabilit ...

  • Lexmark 032 - page 17

    Learni ng about the prin ter Finding informa tion about th e printer What are you looking for? Find it here Initia l setup in struct ions: • Connecting the printer • Installin g the print er software Setup documentation—The setu p documentation came with the printer and is al so available at http://support.le xmark.com . Additional setup and ...

  • Lexmark 032 - page 18

    What are you looking for? Find it here The latest supplemental information, upda tes, and customer support: • Docu mentati on • Driver d ownload s • Live chat support • E ‑ mail support • Voice support Lexmark Support We b site— http://support.le xmark.com Note: Select your country or region, and then select your product to view the a ...

  • Lexmark 032 - page 19

    1 2 3 5 4 1 348 mm ( 13.7 i n.) 2 609.6 m m (24 i n.) 3 100 mm ( 3.94 i n.) 4 100 mm ( 3.94 i n.) 5 285 mm ( 11.22 in. ) Printer configurations Basic model Notes: • The printe r sta nd is a cabinet that can be c onverted into a cast er base . • If used wi th a prin ter s tand, the n th e printer suppor ts only o ne option al 5 50-shee t tray. ? ...

  • Lexmark 032 - page 20

    1 2 3 4 5 6 7 8 1 Automatic Doc ument Feeder (ADF) 2 ADF input tray 3 ADF e xit bin 4 Multipurpose feeder 5 Standard 1 50 ‑ sheet tray (Tray 1) 6 Standard 2 50 ‑ sheet tray (Tray 2) 7 Standard exit bin 8 Printer control panel Conf igured mo del CAUTION—TIPPI NG HAZARD: Fl oo r ‑ mount ed confi guratio ns re quire add ition al fur niture f o ...

  • Lexmark 032 - page 21

    9 10 11 9 Optio nal 5 50 ‑ sheet trays 10 Caster base (converted from a printer stand) 11 Prin te r sta nd Basic functions of the scanner The scanne r provi des copy, fax , and sc an-to-n etwork c apabili ty for larg e workg roups. You can: • Make q uick copie s, o r change t he se ttings on the pr inte r contro l panel to perfor m specific cop ...

  • Lexmark 032 - page 22

    Understanding th e ADF and sc anner glass Automatic Do cument Feede r (ADF) Scan ner glas s Use the ADF for m ulti ple ‑ page documents, includi ng duplex pages. Use the scanner gl ass for single pages or book page s, small items (such as postcards or photos), transparenci es, photo paper, or thin media (such as ma gazine cli ppings). Using the A ...

  • Lexmark 032 - page 23

    • Scan or co py docu ments up to 296.9 x 431. 8 mm (11.69 x 17 in.). • Copy book s up to 25.4 m m (1 in.) thick. Understanding th e printer co ntrol panel 1 @!. 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ * 0 # 1 2 3 4 6 7 5 Item Descriptio n 1 Display Shows the status of the printer, and allows printer setup and operati on 2 Indicator li ...

  • Lexmark 032 - page 24

    Item Descriptio n 7 Home Lets you navigate back to the home screen Learning about t he prin ter 24 ...

  • Lexmark 032 - page 25

    Understandin g the home screen Understanding the hom e screen When th e printer is tu rned on, t he display show s a basic s creen, referred to as the home screen . Touch the h ome screen button s an d icons to initia te an ac tion s uch as co pyin g, fa xing, o r scann ing; to ope n the m enu sc reen ; or t o respo nd to messages. Note: Your ho me ...

  • Lexmark 032 - page 26

    Other bu tton s th at may appe ar on t he hom e scree n: Touch To Search held jobs Search on any of the following items: • User name for held or confidential print jobs • Job names for held jobs, excluding co nfidential print jobs • Profile n ames • Bookmark container or print job names • USB container or prin t job names for supported fi ...

  • Lexmark 032 - page 27

    Samp le touc h scre en Submit Touch To Submit Submit chang es made in the prin ter settings. Sample Copy Print a sample copy. Right a rrow Scroll to the rig ht. Left arro w Scroll to the left. Home Return to the home screen. Right in crease Sel ect a hig her va lue. Left decrea se Select a l ower value. Exit Exit from the current scr een. Underst a ...

  • Lexmark 032 - page 28

    Touch To Tips Open a context-sensitive Help dialog o n the touch screen. Other to uch- screen b uttons Touch To Acce pt Save a se ttin g. Cancel • Cancel an action or a selection. • Exit a screen and lets you return to the previous s creen without saving cha nges. Reset Reset v alues on the screen. Radio bu tton Select or c lear an item. Featur ...

  • Lexmark 032 - page 29

    Feature Description Warn ing If an error condi tion occurs, then this icon appear s. Underst anding the home screen 29 ...

  • Lexmark 032 - page 30

    Setting up and usin g the home screen applications Notes: • Your home screen, i cons, a nd but tons m ay vary depen ding o n your ho me scre en custo mizat ion set tings, adminis trativ e setup , and a ctiv e embedd ed appl ications . Some appli cations are su pporte d only o n select printe r mod els. • There may be additi onal so lutions and ...

  • Lexmark 032 - page 31

    Exporting and impo rting a configura tion using the Embedd ed Web Server You can e xport config uration setting s int o a text file that can the n be im ported a nd use d to app ly the s etting s to on e or mor e additi onal pri nters. Exporting a configuration 1 From the Em bedded W eb Serv er, cli ck Settings or Confi gurat ion . 2 Click Devi ce ...

  • Lexmark 032 - page 32

    Activating the home screen application s Your p rin ter comes w ith pr ein stal led ho me scr een appl icat ions . To us e th ese ap pli catio ns, activa te an d se t up th ese applicat ions using th e Embe dded W eb Serve r. For m ore in formati on about access ing the Embedde d Web S erver, s ee “Acces sing th e Em bedded W eb Se rver” on pag ...

  • Lexmark 032 - page 33

    3 Specify the destinations, and then customize the set tings. 4 Click Apply . To use the a pplicat ion, to uch Scan to Network on the printer home screen, and then follow th e instructions on th e printer disp lay. Setti ng up My MF P Icon Description The application lets you customize your touch ‑ screen settings and store those preference s in ...

  • Lexmark 032 - page 34

    3 Select the Enabled check box, and then customize the settings . 4 Click Apply . To use the app lication, from the Embe dded Web Server, click Applica tions > Remot e Ope rat or Pane l > Laun ch VNC Appl et . Setting up and using th e ho me scre en appl icatio ns 34 ...

  • Lexmark 032 - page 35

    Additional printer setup Installing internal options CAUTION —SHOCK HA ZARD: If you are acce ssing the s ystem b oard or in stall ing opti onal har dware or mem ory devic es some time af ter settin g up t he prin ter, t hen tu rn th e print er off , and unplug the po wer cord from the wall outle t befo re conti nuing . If you h ave any oth er dev ...

  • Lexmark 032 - page 36

    Accessing the s ystem board CAUTION —SHOCK HA ZARD: If you are acce ssing the s ystem b oard or in stall ing opti onal har dware or mem ory devic es some time af ter settin g up t he prin ter, t hen tu rn th e print er off , and unplug the po wer cord from the wall outle t befo re conti nuing . If you h ave any oth er dev ices atta ched to the pr ...

  • Lexmark 032 - page 37

    1 2 3 1 Mem ory ca rd conn ecto r 2 Firmware and flash memory card connect ors 3 ISP co nnect or 4 Reattach the cove r. Installing a memory card CAUTION —SHOCK HA ZARD: If you are acce ssing the s ystem b oard or in stall ing opti onal har dware or mem ory devic es some time af ter settin g up t he prin ter, t hen tu rn th e print er off , and un ...

  • Lexmark 032 - page 38

    3 On the syste m board, open the mem ory card connector latches . 4 Alig n the no tche s on the me mory card to th e ridg es on t he c onne ctor. 1 Notch 2 Ridge Additi onal pr inter se tup 38 ...

  • Lexmark 032 - page 39

    5 Push th e memory ca rd strai ght in to the co nnecto r until it clicks into place. 2 1 6 Reattach the system board cover. Installing a flash memory or firmware card The syst em board has two connec tions f or an o ptional flash m emor y or fir mware c ard. Onl y one o f each m ay be insta lled, but the connectors are interchangeable. CAUTION —S ...

  • Lexmark 032 - page 40

    4 Push the ca rd firmly into place. Notes: • The entir e length of the c onnect or on t he card must touch a nd be f lush a gainst t he syst em boa rd. • Be ca reful no t to dam age the c onnectors . 5 Reattach the system board cover. Installing an Inte rnal Solutions Port The sy stem b oard support s o ne opt ional Lexma rk TM Inter nal S olut ...

  • Lexmark 032 - page 41

    3 Remove the two screws. 4 Unpack the ISP kit. 1 2 3 4 1 ISP soluti on 2 Screws for t he ISP solutio n 3 Screws for t he plastic brac ket 4 Pl asti c b rac ke t 5 Use the pro vided sc rews to att ach th e plas tic brac ket to th e ISP s olution . Additi onal pr inter se tup 41 ...

  • Lexmark 032 - page 42

    6 Use the pr ovid ed scr ew to at tach the ISP solut ion to the syste m boar d cage . Additi onal pr inter se tup 42 ...

  • Lexmark 032 - page 43

    7 Connect the ISP solution interface cable into the receptacle of the syst em board. 8 Firmly c onnect the IS P solu tion to t he system board c age usin g two s crews. Additi onal pr inter se tup 43 ...

  • Lexmark 032 - page 44

    Installing a printer hard dis k CAUTION —SHOCK HA ZARD: If you are acce ssing the s ystem b oard or in stall ing opti onal har dware or mem ory devic es some time af ter settin g up t he prin ter, t hen tu rn th e print er off , and unplug the po wer cord from the wall outle t befo re conti nuing . If you h ave any oth er dev ices atta ched to th ...

  • Lexmark 032 - page 45

    Removing a printer h ard di sk The pr int er ha rd dis k is p rein sta lled in thi s dev ice. Note: This task re quires a flat head screwd river. Warn ing —Pot ent ial D amag e: System board electronic compon ents are eas ily damaged by s tatic electri city. Touch something m etal on the print er before touchi ng any system board electro nic comp ...

  • Lexmark 032 - page 46

    4 Remove the p rinter hard disk. 5 Reattach the system board cover. Installing optional trays Order of ins tallation CAUTION—TIPPI NG HAZARD: Fl oor-mo unted config urations require a dditio nal furni ture for stabilit y. You mus t use eith er a print er stand or pr inter base if yo u are using a hig h-capacity input tray, a dup lex unit and a n ...

  • Lexmark 032 - page 47

    Installing a prin ter stand and optional tray Note: If used w ith a pr inter s tand, then t he printe r suppo rts onl y one o ptional 550 ‑ sheet tray. CAUTION—PO TENTIAL IN JURY: Th e print er we ight is great er tha n 18 kg (40 lb) and r equire s two or mor e trained p ersonnel to lift it safely. CAUTION —SHOCK HA ZARD: If you are acce ssin ...

  • Lexmark 032 - page 48

    3 Atta ch th e thumb scre ws o n top of the pri nter s tand. 4 Alig n the o ptiona l tr ay to t he prin ter s tand, t hen lower t he pr inter to th e tray. Additi onal pr inter se tup 48 ...

  • Lexmark 032 - page 49

    5 Lock th e st andard and o ption al tray s tog ether using the b racket s tha t cam e with th e opti onal tray . a Open the s tandard 2 50- and opt ional 550 ‑ sheet tray. b Remove the screw from the 250 ‑ sh eet tray. c Place a bracket over the screw hole and secure it with th e screw. d Close the trays. Additi onal pr inter se tup 49 ...

  • Lexmark 032 - page 50

    6 Lock the op tional 550 ‑ s heet tray to the pri nter stan d. a Open the opt ional 550 ‑ sheet tray and remov e the screw. b Open t he printe r sta nd. c Place a bracket over the screw hole and secure it with th e screw. d Close th e optio nal tra y and printe r stan d. Additi onal pr inter se tup 50 ...

  • Lexmark 032 - page 51

    7 Plug in the electrical connections between trays. 8 Atta ch brack ets to the back o f the p rinter, op tional tray, and print er s tand. 1 2 1 Bracket to lock option al tray to pri nter 2 Bracket to lock option al tray to pri nter stand a Insert bracke ts on the s lots lo cated a t the back o f the optio nal t ray and printe r stan d. Additi onal ...

  • Lexmark 032 - page 52

    b Secur e the br acke ts with s crews. c Insert bracke ts on the s lots lo cated a t the back o f the printe r and o ption al tr ay. d Secur e the br acke ts with s crews. Additi onal pr inter se tup 52 ...

  • Lexmark 032 - page 53

    9 Insert th e bases on the slot s at the sid es of the p rinter st and and secure them w ith screw s. 10 Turn the pr inter back o n. 11 Set the pr int er software to r eco gnize th e optiona l inpu t sourc e. For more in formati on, see “Upd ating avai lable opti ons in th e printer driver” on pa ge 62. Installi ng 550 ‑ sh eet trays Notes: ? ...

  • Lexmark 032 - page 54

    1 Unpack the optio nal tray and the printe r stand , and then remove all pa cking material . 1 3 2 4 1 Optional 5 50-sheet tra y 2 Printer sta nd 3 Brackets and screws 4 Thumbscrews 2 Turn the printe r off, and un plug t he power cord from th e wall outle t before conti nuing. If you have any othe r device s attach ed to the p rinter, then turn the ...

  • Lexmark 032 - page 55

    b Lift th e upper portio n of th e print er st and, lea ving the bas e. 4 Attach the thumbscr ews on the caster ba se. Additi onal pr inter se tup 55 ...

  • Lexmark 032 - page 56

    5 Align the trays to th e caster base, then lower t he printer to the tr ays. 6 Lock th e st andard and o ption al tray s tog ether using the b racket s tha t cam e with th e opti onal tray . a Open the s tandard 2 50- and opt ional 550 ‑ sheet tray. Additi onal pr inter se tup 56 ...

  • Lexmark 032 - page 57

    b Remove the screw from the 250 ‑ sh eet tray. c Place a bracket over the screw hole and secure it with th e screw. d Close the trays. 7 Lock the op tional 550 ‑ s heet trays togeth er using the scr ews that came with the trays. a Remove the uppe r optional 550-sh eet tray drawer. Leave the lower op tional trays open. Additi onal pr inter se tu ...

  • Lexmark 032 - page 58

    b Reach into the lower o ptional tray and insert a s crew, pushi ng it up ward to the optio nal tray above it. 1 2 8 Plug in the electrical connections between trays. 9 Atta ch brack ets to t he back o f the p rint er and optio nal t rays. a Insert brac kets on the s lots locate d at t he back o f th e op tional tray s. b Secur e the br acke ts wit ...

  • Lexmark 032 - page 59

    c Insert bracke ts on the s lots lo cated a t the back o f the printe r and o ption al tr ay. d Secur e the br acke ts with s crews. 10 Inser t t he base s on the slo ts at th e si des of the cas ter b ase and secu re them with s crews. 11 Turn the pr inter back o n. 12 Set the pr int er software to r eco gnize th e optiona l inpu t sourc e. For mo ...

  • Lexmark 032 - page 60

    Attaching cables CAUTION—PO TENTIAL IN JURY: D o not use th e fax fe ature du ring a light ning storm . Do no t set up thi s produc t or make an y elect rical or cabli ng conne ctions , such as the fa x featur e, power cord, o r teleph one, during a lightnin g storm. Connect the p rinter to the computer u sing a USB cable or Eth ernet cable. Be s ...

  • Lexmark 032 - page 61

    Verifying printer setup Once al l hard ware and soft ware op tions are i nstal led a nd the p rinte r is t urned on, veri fy tha t the p rint er is s et up correc tly by printin g the foll owing: • Menu se ttin gs pag e —Use thi s page to veri fy that all p rinte r options are insta lled cor rectly. A list of ins talled options appear s towa rd ...

  • Lexmark 032 - page 62

    If you are using a Software and Do cument atio n CD and the installation dialog does not appear, then do the following: In Windows 8 From th e Search charm, type run , a nd then na vigate to: Apps list > Run > type D:setup.exe > OK . In Windows 7 or earlier a Click or click Start , and then c lick Run . b In the Sta rt Searc h or Run di a ...

  • Lexmark 032 - page 63

    5 Do either of the following: • Click Update Now ‑ Ask Pr inter . • Under Co nfigurat ion O ptions, manual ly add a ny inst alled har dware opti ons. 6 Click Apply . For Macintosh users 1 From the A pple m enu, n aviga te to eithe r of t he follo wing: • Syst em Pre feren ces > Print & Scan > select your printe r > Option s &am ...

  • Lexmark 032 - page 64

    • 802.1X user na me and password • Certificates – No security If your wir eless n etwork do es not us e any type o f sec urity, th en you will no t have any sec urity inf ormat ion. Note: Using an unsec ured wi reless netw ork is no t recom mended. Notes: – If you do no t kno w the SS ID of t he networ k that your comput er is co nnecte d t ...

  • Lexmark 032 - page 65

    2 Obtain a co py of th e software installer pa ckage. • From t he So ftwar e and D ocume ntati on CD that came with your printer. • From ou r Web sit e: Go to htt p:// suppo rt.le xmark .com , and then navig ate to : SUPPORT & DOWNLOAD > select your pr inter > se lect your oper ating sy stem 3 Doub le ‑ c lick t h e sof twa re in st ...

  • Lexmark 032 - page 66

    Installi ng the pri nter on a wi reless ne twork (Macin tosh ) Note: Make su re to disconne ct the Eth ernet c able when ins talling t he prin ter on a wire less net work. Prepare to configure the printer 1 Connect the p ower c ord to the pr inter , then to a p roperl y grounded electrical outlet, and th en turn on the print er. 1 2 2 Locate the pr ...

  • Lexmark 032 - page 67

    5 Under COLLECTIONS, select Bonjou r or Rende zvous , and the n double ‑ click the pr inte r name. Note: The appl ication re ferred t o as Rende zvous in Ma c OS X version 10.2 is now call ed Bonjour by App le Inc. 6 From the Emb edde d Web Server, navig ate to th e locat ion of the w irele ss setti ngs inform ation . Configure the printer for wi ...

  • Lexmark 032 - page 68

    In Mac OS X versi on 10 .5 o r later 1 From the Apple menu, n avigate to either of the following: • Syst em Pref eren ces > Print & Scan • Syst em Pref eren ces > Print & Fax 2 Click + . 3 If necessary, click Add Pr inter o r Scan ner or Add Ot her Pri nte r or Sc anne r . 4 Click the IP ta b. 5 Type the IP address of the printer ...

  • Lexmark 032 - page 69

    For Windows users 1 Obtain a co py of th e software installer pa ckage. • From t he So ftwar e and D ocume ntati on CD that came with your printer. • From ou r Web sit e: Go to htt p:// suppo rt.le xmark .com , and then navig ate to : SUPPORT & DOWNLOAD > select your pr inter > se lect your oper ating sy stem 2 Doub le ‑ c lick t h ...

  • Lexmark 032 - page 70

    c Sele ct a dest ina tio n, an d th en cl ick Co ntinu e . d From the Easy In stall screen , cl ick Install . e Type the use r passw ord, and th en click OK . All the ne cessary a pplicatio ns are in stalled on the comp uter. f Click Close when the installation is complete. 4 Add the printer. • For IP pr inting : In Mac OS X version 10.5 or late ...

  • Lexmark 032 - page 71

    f From the se cond pop ‑ up menu, s elect Local App leTalk Zo ne . g Select the d evice fr om the li st, and th en click Add . Note: If the scanner does not show up in the list, then you may need to add it using the IP address. For more inf ormat ion , co ntac t y our sy stem sup por t pers on. Changing port settings after in stalling a new netwo ...

  • Lexmark 032 - page 72

    3 To sel ect the pr inter that has cha nged, do ei ther o f the followi ng: • Press a nd hol d the pr inter , and t hen se lect Printer prop erti es . • Right ‑ click the print er, an d then sel ect Pri nter pro perti es (W indo ws 7 or late r) or P rop erties (ea rl ier vers io ns). Note: If there is more than one copy of the p rinter, then ...

  • Lexmark 032 - page 73

    After in stalling the se rial or co mmunic ation (COM) por t, config ure the printer and the co mpute r. Make sure you hav e connected the serial cable to th e COM port on your print er. 1 Set the pa rameters in the pr int er. a From the pr int er cont rol p anel, naviga te to the m enu fo r the po rt se ttin gs. b Locate t he menu for the ser ial ...

  • Lexmark 032 - page 74

    In Windows 7 or earlier 1 Click or click Start , and then click Run . 2 In th e Start Sea rch or Run di alog, type devmgmt.msc . 3 Press Enter or click OK . b Double ‑ click Ports (COM & LP T) to expa nd the l ist o f avai lable port s. c Do either of the following: • Press and hold the COM port where you attached the serial cable to your c ...

  • Lexmark 032 - page 75

    Minimizing your printe r's environmental impact Lexmark is co mmitted to environ mental s ustainabi lity and is cont inually im proving its pri nters to r educe their impact on the environment. We design with the environment in mind, engineer ou r packaging to redu ce materials, and provide coll ecti on and recy cling pr ogra ms. Fo r more inf ...

  • Lexmark 032 - page 76

    Avoid paper jams Correct ly set t he paper type an d size to avo id paper ja ms. F or more informat ion, se e “Avoi ding jams” on page 25 2. Print in black and white To print all tex t and gra phics using o nly the blac k toner cart ridge, s et the pr inter t o Black O nly. F or more inf ormatio n, see “Pri nting i n black a nd whit e” on p ...

  • Lexmark 032 - page 77

    If you do not know the IP addre ss of the print er, you can: • View the I P address on the pr inter control panel in the TCP/IP sectio n under the Netwo rks/Port s menu. • Print a netw ork se tup p age or the me nu s etting s pag es and locat e the I P addr ess i n the TCP/I P se ction. 2 Click Sett ing s > Gene ral S etti ngs > Quiet Mod ...

  • Lexmark 032 - page 78

    Using Hibernate Mode Hibernate is a n ultra ‑ low pow er operating mode. Wh en operatin g in Hibern ate mode, t he printer is essentially o ff, and all othe r syst ems and devic es are powe red down saf ely. Note: The Hibe rnate an d Slee p mode s can be schedul ed. Using the Embedded Web Server 1 Type th e printe r IP add ress in the a ddress fi ...

  • Lexmark 032 - page 79

    Setting the standard e xit bin li ght To save energy , you can dim or turn off the o utput lighting for the stand ard exit bin. Available set tings are O ff, Dim, and Br ight. The fact ory def ault sett ing for No rmal /Standby Mode i s Bright. When Eco ‑ Mode is set to En ergy or Energy/Paper, th en the light setting is Dim. When in Sleep Mode, ...

  • Lexmark 032 - page 80

    3 Follow the instruct ions on the computer s creen. Note: Printer supplie s and h ardware n ot li sted in the Lexm ark collect ion pro gram may b e recyc led thr ough yo ur local recycling center. Co ntact yo ur local recycling center to determine th e items they accept. Recycling Lexmark packaging Lexmark cont inually s trives to m inimize pac kag ...

  • Lexmark 032 - page 81

    Loading paper and specialty media Setting the pap er size and typ e The Pape r Size s etting i s auto matica lly sen sed accor ding to the posi tion of the pap er guides in each tray exc ept th e multipurpose feeder. The Paper S ize setting for th e multipurpose feeder must be set manually from t he Paper Size menu. The Paper Type sett ing mus t be ...

  • Lexmark 032 - page 82

    Loading the standard or optional 550 ‑ sheet tray The pr int er has a sta ndard 150 ‑ she et (Tray 1) and 250 ‑ sheet tr ay (Tra y 2), and it may have on e or more op tiona l 550 ‑ sheet trays. All 550 ‑ sheet trays supp ort the sa me pa per si zes and t ypes. CAUTION—PO TENTIAL IN JURY: To reduce the ri sk of e quipme nt inst abilit y, ...

  • Lexmark 032 - page 83

    2 Make sure to release the width guide lock at the rear of t he tray. Squeeze and then slide the width guide to the correct position for the pape r size yo u are loadin g. 2 3 1 Note: Alwa ys use the width guide lock at the rear of the tray to prevent the margins fro m being knocked out of adjustm ent. 3 Squeeze and then slide the le ngth guide to ...

  • Lexmark 032 - page 84

    Notes: • If the paper i s longer th an A4, then load it in short ‑ edge or ien tat ion . • If the paper i s shorter than A4, t hen load it in long ‑ edge or ien tat ion . • Make sur e the paper is belo w the maximum fill line l ocated on th e edge of th e pa per tray . Ove rloadi ng the tray can ca use pap er jams and p ossible pr inter d ...

  • Lexmark 032 - page 85

    8 Lock the width gui de. 9 Ins ert the tra y. 10 From the print er co ntrol panel , veri fy th e Paper Size and Pape r Type f or the t ray ba sed on t he paper you loade d. Loading pape r and specialt y media 85 ...

  • Lexmark 032 - page 86

    Loading the multipurpose feeder The mul tipurpo se f eeder ca n hold seve ral siz es and types o f pri nt med ia, suc h as tr ansparenc ies, l abels , card s tock, and envelope s. It ca n be used for sing le-page o r manual printin g, or as an addi tiona l tray. The mul tipurpose feede r can hol d approxi mately: • 50 sheets of 75 ‑ g/m 2 (20 ? ...

  • Lexmark 032 - page 87

    3 Flex the sheets of paper or specialty media back and forth to loos en th em. Do not fo ld or cr ease them. Stra ighten the edges on a level surface. Paper Enve l ope s Transparencies Note: Avoid scratching or touching the pri nt side. 4 Load the paper or specialty media. Slide the stack gently int o the multipurp ose feeder unti l it come s to a ...

  • Lexmark 032 - page 88

    Long ‑ edge orientation Sho rt ‑ edge orientation Warning—Pote ntial Da mage: Never use enve lopes wit h stamps, c lasps, snaps, win dows, c oated lini ngs, or self ‑ stick a dhesive s. These envelo pes ma y seve rely dam age th e print er. 5 Adjust the width guide to lightly touch the edge of the stac k. Make sure the paper or s p ecialty ...

  • Lexmark 032 - page 89

    Change on e of t he f ollo wing tr ay se tti ngs: • Pape r Type Paper Typ e names de scrib e the pape r charact erist ics. If the nam e that best des cribes you r paper i s used by l inked trays, assign a different Paper Type name to the tray, s uch as Cus tom Type [x], o r define your own custom nam e. • Paper Si ze Load a dif feren t pape r s ...

  • Lexmark 032 - page 90

    Paper and specialty media guidelines Paper guidelines Paper characteristics The follo wing pape r charact erist ics affect print qu ality and r eliabil ity. Co nsider th ese fa ctors before printi ng on them: Weight The print er trays and mul tipur pose feeder c an auto matic ally feed paper weigh ts betw een 60–176 g/m 2 (16–47 ‑ lb) gra in ...

  • Lexmark 032 - page 91

    Unaccep tab le pape r The following paper types are no t recommended for use with the printer : • Chemi cally tre ated pap ers us ed to ma ke copie s without carbon pa per, als o known a s carbonl ess paper s, carbo nless copy paper (CCP ), or no carb on req uir ed (NCR) pape r • Preprinted papers with chemicals that may contam inate the pri nt ...

  • Lexmark 032 - page 92

    Lexmark cons istent ly tests it s printers with recyc led paper (20–100% post-co nsumer waste) and a var iety of test paper from ar ound the w orld, us ing c hamber t ests for d ifferen t te mperat ure a nd hum idity conditi ons. Lexm ark has found no reason to discourage the use of today's recycled office papers , but generally the followin ...

  • Lexmark 032 - page 93

    Supported pape r sizes , types, and weights The follo wing tabl es p rovide inform ation o n standa rd an d opti onal paper i nput sou rces and th e types o f paper t hey suppor t. Note: To use a paper size that is unlis ted, co nfigur e a Uni versal Paper S ize. Supported p aper size s Paper size and dimension 150 ‑ sheet tray 250 ‑ sheet tray ...

  • Lexmark 032 - page 94

    Paper size and dimension 150 ‑ sheet tray 250 ‑ sheet tray 520 ‑ sheet tray MP Feeder Manual Paper Manual Envelope Duplex ADF Scanner glas s 11x17 279 x 4 32 mm (11 x 17 in .) 2 2 3 3 X Oficio ( Méxic o) 216 x 3 40 mm (8.5 x 13.4 in.) XX X 3 3 X 4 4 Folio 216 x 3 30 mm (8.5 x 13 in .) XX X 3 3 X 1 1 Statement 140 x 2 16 mm (5.5 x 8. 5 in.) X ...

  • Lexmark 032 - page 95

    Paper size and dimension 150 ‑ sheet tray 250 ‑ sheet tray 520 ‑ sheet tray MP Feeder Manual Paper Manual Envelope Duplex ADF Scanner glas s Other Envelope 86 x 16 5 mm t o 216 x 3 56 mm (3.375 x 6.50 in . to 8.5 x 14 in.) XX X 3 X XX X 1 Paper size is supported if set to metric. 2 Paper size is supported if set to US. 3 Source supports size ...

  • Lexmark 032 - page 96

    Printing Printing a docume nt Printing a docum ent 1 From the p rinter c ontrol panel, set the p aper type and s ize to match the pape r load ed. 2 Send the print job: For Windows users a With a do cument open, cli ck File > Print . b Click Properties , Pref ere nces , Opti ons , or Setup . c Adju st the sett ings , if nece ssary. d Click OK > ...

  • Lexmark 032 - page 97

    3 Adjust the toner darkne ss set ting. 4 Click Submi t . Printing from a mobi le dev ice For th e list of support ed m obile de vice s and to downlo ad a comp atible mobil e print ing a pplica tion, vi sit http:/ /lexm ark. com/m obile . Note: Mobile printin g applica tions m ay also be availa ble from your mo bile dev ice man ufacturer . Printi ng ...

  • Lexmark 032 - page 98

    Warning—Pote ntial Da mage: Do no t tou ch the US B cabl e, any net work a dapte r, any co nnecto r, the memory devic e, or t he prin ter i n the ar eas sh own whil e activ ely p rinting , re ading, or writ ing fr om the memo ry dev ice. A loss of d ata can occur. 2 From the pr inter co ntro l pan el, touc h Print from USB , and then sele ct the ...

  • Lexmark 032 - page 99

    Printing on specialty media Tips on us ing le tterhead • Use lett erhead des igned speci fically for l aser/LED prin ters. • Print sample s on the lett erhead being c onsid ered f or use bef ore buying lar ge qua ntiti es. • Before loading letterhead, flex the sheets to p revent them from sticking together. • Page or ientation is imp ortant ...

  • Lexmark 032 - page 100

    Tips on us ing en velo pes Print sample s on the envelop es being considered for us e before buying large quantit ies. • Use envelo pes design ed specifica lly for laser/LED p rinters. Check with the ma nufacture r or vendo r to ensu re that the envelopes can withstand temperatu res up to 220°C (446°F) without sealing, wrinkling, curling excess ...

  • Lexmark 032 - page 101

    • If zone coating of the a dhesiv e is not possibl e, remo ve a 1.6 m m (0.0 6 in.) str ip on the leadin g and driv er edg e, and use a non ‑ oozing adhe sive. • Portra it o rienta tion wor ks bes t, especi ally whe n print ing b ar codes. Tips on us ing ca rd stock Card st ock is h eavy, sing le ‑ pl y specialty medi a. Many of its vari ab ...

  • Lexmark 032 - page 102

    Printing confiden tial and o ther held job s Note: Confiden tial and Veri fy print jobs ar e automat ically d eleted from m emory a fter pr inting. Repeat and Res erve jobs are hel d in the pri nter until you delete them. For Windo ws user s 1 With a d ocu ment o pen, c lick F ile > Print . 2 Click Properties , P refer ence s , Options , or Se t ...

  • Lexmark 032 - page 103

    Printing a directo ry lis t A dire ctory list shows the resou rces st ored in a fl ash me mory or on the pr inter ha rd dis k. From the home s creen, navig ate to : > Report s > Print D irectory Using Max Speed and Max Yield The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yiel d. Max Yield is ...

  • Lexmark 032 - page 104

    Cancel ing a print job fro m the com puter For Windows users 1 Open the printers folder. In Wind ows 8 From th e Search charm, type run , a nd then na vigate to: Apps list > Run > type control printers > OK In Wind ows 7 or ea rlier a Click or click Start , and then c lick Run . b In the Sta rt Searc h or Run di alog, typ e control printer ...

  • Lexmark 032 - page 105

    Copying ADF Scanner glass Use the ADF for m ulti ple ‑ page documents. Use the scanner glass for sing le pages, small items (such as postcards or photos), transp arencies, photo paper, or t hin media (such as magazin e clippings) . Making copies Making a qu ick copy 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face ...

  • Lexmark 032 - page 106

    Copyin g usin g the scanne r glass 1 Place an orig inal do cument f acedo wn on the scanne r glas s in the upper le ft corne r. 2 From the home s cre en, n avig ate to : Copy > change the co py settings > Copy It 3 If you have more pag es to sca n, then plac e the next documen t on the sc anner g lass, and then tou ch Scan the Next Page . 4 T ...

  • Lexmark 032 - page 107

    4 Place the letterhead faceup, top edge firs t in the multipurp ose feeder. 5 Select the s ize of the le tterhead . 6 Navigate to: Cont inue > Letter head > Con tinue > Copy It Customizing copy s ettings Copyin g to a diff erent si ze 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glas ...

  • Lexmark 032 - page 108

    Copyin g different pap er sizes Use the ADF to copy origin al doc uments with diff erent p aper sizes . Depe nding o n the pape r si zes load ed a nd the “Cop y to” and “Cop y from” settin gs, each co py is eithe r printed o n mixed pape r si zes (Examp le 1) or scal ed to fit a si ngle paper size (Examp le 2). Example 1: Copying on mixed p ...

  • Lexmark 032 - page 109

    Reducing or enlargin g copies Copies ca n be reduced to 25% of the original docu ment size or en larged to 400% of the origi nal docu ment size. The factor y defaul t setting for Scale i s Auto. If you lea ve Scale se t to Auto , the co ntent of yo ur origi nal doc ument wil l be scaled to fit th e size o f the paper ont o whic h you are co pying. ...

  • Lexmark 032 - page 110

    • Press —Us e when the o riginal document was print ed usi ng a pri nting pr ess. • Other —Use when the or iginal do cument was prin ted us ing an alternat e or unkno wn print er. 7 Touch > Copy It . Collati ng c opies If you prin t mul tiple c opies of a do cument , then you can cho ose t o print e ach copy as a set (co llated) or to pr ...

  • Lexmark 032 - page 111

    Copyi ng mu ltip le page s on to a si ngle s heet In order to save pa per, you can co py either two or four con secutive pages o f a multip le ‑ page docum ent ont o a singl e sheet of pa per. Notes: • The Pap er Si ze m ust be s et to Lett er, L egal, A 4, or JIS B5. • The Copy Size must be set to 1 00%. 1 Load an o rigina l docum ent fa ceu ...

  • Lexmark 032 - page 112

    Placing information on copies Placing the date and time at the top of each page 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glass. Note: Do not l oad po stcards , pho tos, sm all it ems, tr anspa rencies , phot o pap er, or th in me dia (su ch as magazi ne clippings) into the ADF. Place thes ...

  • Lexmark 032 - page 113

    Cance ling a copy j ob w hile pag es are being prin ted 1 From the pr inter co ntro l pan el, touc h Cancel Job or press on th e key pad. 2 Touch t he job you wa nt to cancel, a nd then touc h Delet e Selected Jobs . Note: If you press on the keypad, then touc h Resume to retu rn to th e home scr een. Understanding th e copy sc reens and op tions C ...

  • Lexmark 032 - page 114

    Darkness This o ption adjust s how li ght o r dark y our co pies wil l turn out in rela tion t o the origina l docum ent. Sides (Dup lex) Use this opti on to sele ct dupl ex sett ings. You can pr int c opies on o ne or two side s, ma ke two-si ded copies (duplex ) o f two-side d orig inal d ocumen ts, make two-side d copi es from one- sided origina ...

  • Lexmark 032 - page 115

    Advanced Options Touching the Advanced Options b utton opens a screen where you can chan ge the following settings: • ADF S kew Fix —Use to correct slight skew in the scanned image. • Advanced Duple x —Use to s pecify the do cument orient ation , wheth er docum ents are o ne-si ded o r two-sid ed, and how doc uments are b ound. Note: Some A ...

  • Lexmark 032 - page 116

    E-mailing ADF Scanner glass Use the ADF for m ulti ple ‑ page documents. Use the scanner glass for sing le pages, small items (such as postcards or photos), transp arencies, photo paper, or t hin media (such as magazin e clippings) . You can use the printer to e ‑ mail scanned documents to on e or more recipients. There are three ways to s end ...

  • Lexmark 032 - page 117

    If you do not know the IP addre ss of the print er, you can: • View the I P address on the pr inter control panel in the TCP/IP sectio n under the Netwo rks/Port s menu. • Print a netw ork se tup p age or the me nu s etting s pag es and locat e the I P addr ess i n the TCP/I P se ction. 2 Click Sett ing s > E-mail/FTP Settings > E-mail Se ...

  • Lexmark 032 - page 118

    E-mailing a document Sending an e-mail using th e touch sc reen 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glass. Note: Do not l oad po stcards , pho tos, sm all it ems, tr anspa rencies , phot o pap er, or th in me dia (su ch as magazi ne clippings) into the ADF. Place these items on the s ...

  • Lexmark 032 - page 119

    4 Touch t he na me of th e rec ipie nts. To ent er additi onal re cipie nts, touc h Next ad dress , and then en ter t he addres s or sho rtcut number yo u want to add, or searc h the addr ess bo ok. 5 Touch Done . Customizing e-mail settings Adding e-ma il subjec t and messag e info rmation 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst ...

  • Lexmark 032 - page 120

    • JPEG —Us e this to cr eate and attach a sepa ra te fil e for ea ch page of your ori ginal docume nt, viewable by mo st Web bro wsers and gra phi cs pr ogr ams. • XPS —Use this t o creat e a s ingle XML Paper Specific ation (XPS ) file with multiple pag es, viewable us ing an Inter net Explorer-hosted viewer and the .NET Framework, or by d ...

  • Lexmark 032 - page 121

    Resolution Adjust s th e out put qualit y of yo ur e- mail. Increas ing t he i m age resolution increases the e-mail file size and the time needed t o scan your origina l docum ent. I mage reso lution c an be de creased to red uce the e -mail f ile size . Color This opt ion set s the out put c olor for t he scan ned ima ge. Touc h to en able or dis ...

  • Lexmark 032 - page 122

    Page Setup This option lets you c hange t he Sides (Duplex) , Orient ation, and Binding . • Sides ( Duplex) — Specifie s if the orig inal do cument is sim plex (prin ted on one page) or duplex (pri nted o n both sides). This also identifies what needs to be scanned for inclusion in the e-mail. • Orientat ion — Specifies the orient ation o f ...

  • Lexmark 032 - page 123

    Faxing Note: Fax capab ilitie s may no t be av ailabl e on all printer models . ADF Scanner glass Use the ADF for m ulti ple ‑ page documents. Use the scanner glass for sing le pages, small items (such as postcards or photos), transp arencies, photo paper, or t hin media (such as magazin e clippings) . Getting the prin ter read y to fax The fo ll ...

  • Lexmark 032 - page 124

    Choos ing a fax conn ecti on Notes: • The printer is an analog device that works best when directly con nected to the telephone wall outlet. Other device s(such as a tel epho ne or ans wering mach ine) ca n be suc cessfull y atta ched to pass throug h the print er, as descri bed in the se tup ste ps. • If you want a digital c onnectio n such as ...

  • Lexmark 032 - page 125

    Connec ting to a DSL service If you subscribe to a DSL service, then contact the DSL pr ovider to obtain a D SL filter and t elephone co rd, and t hen follow these st eps to con nect the equipment : 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the pr inter t o the pri nter LI NE port . 2 Connect the other end of the telep hone cabl ...

  • Lexmark 032 - page 126

    Connec ting to a di stinctive ring servic e A distinct ive ri ng servic e may be avail able from your tel epho ne servic e provider. This ser vice allows you to have multiple telepho ne num bers on o ne teleph one line, wit h each t elephone number having a diff erent ring pattern. This may be useful fo r disti nguis hing betwe en fax and v oice ca ...

  • Lexmark 032 - page 127

    For so me count ries o r regi ons, a tel ephone line adap ter is include d in th e box. Us e this ada pter t o connec t an answ ering machine, telepho ne, or other te lecom municati ons equipm ent t o the pri nter. 1 Connec t one e nd of the telepho ne cabl e tha t came wit h the pr inter t o the pri nter LI NE port 2 Connec t the other e nd of the ...

  • Lexmark 032 - page 128

    3 In the Set Date & Time field, enter the cu rrent date an d time. 4 Click Submi t . Note: It is rec ommen ded to use the n etwor k time. Configu ring the printe r to ob serve day light savi ng ti me The pr int er ca n be s et to a utom atica lly a djus t for dayl ight savi ng time : 1 Type th e printe r IP add ress in the a ddress fi eld o f y ...

  • Lexmark 032 - page 129

    Creating a fax destinati on shortc ut usi ng the touch sc reen 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glass. Note: Do not l oad po stcards , pho tos, sm all it ems, tr anspa rencies , phot o pap er, or th in me dia (su ch as magazi ne clippings) into the ADF. Place these items on the sc ...

  • Lexmark 032 - page 130

    5 Select the app ropria te pap er si ze and p age orie ntatio n. 6 If you want to include a cov er p age wit h the fax, then selec t Include co ver pa ge with f ax , and ent er th e approp riate info rma tio n. 7 Click OK . Notes: • The Fax option is available for use on ly with the PostScript driver or th e Universal Fax Driver. For information ...

  • Lexmark 032 - page 131

    Customizing fax settings Changing the fax resolution Settings rang e from Stan dard (fastest sp eed) to Ultra Fine (s lowe st speed, b est qua lity). 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glass. Note: Do not l oad po stcards , pho tos, sm all it ems, tr anspa rencies , phot o pap er, o ...

  • Lexmark 032 - page 132

    4 Touch the arr ows to a djust the ti me th e fax will be tr ansm itted. The time is increased or decreased in increments of 30 mi nutes. If the cur rent time is shown , th e left arrow is unavaila ble. 5 Touch Fax It . Note: The docume nt is scanned and th en fax ed at th e sche duled t ime. Viewin g a f ax log 1 Type th e printe r IP add ress int ...

  • Lexmark 032 - page 133

    Canceli ng a fax after the o riginal docume nts have been scanned to m emory 1 On the home screen, touch Cancel Jobs . The Cancel Jobs screen appears. 2 Touch t he job or jobs you wa nt to can cel. Only three jo bs appe ar on th e scree n; tou ch th e down a rrow until the job you want appear s, and then t ouch the job you want to ca ncel. 3 Touch ...

  • Lexmark 032 - page 134

    Darkness This o ption ad justs how li ght or d a rk your faxes will turn out in re lation to the orig inal doc ument. Color This option enables or disabl es color in faxing. Page Setup This opti on lets yo u change t he Sides (Duple x), Or ientati on, and Bin ding se ttings . • Side s (Dup lex) —Use to specify if the origina l docum ent is s im ...

  • Lexmark 032 - page 135

    Holding and forwarding faxes Hold ing faxe s This option lets you hold received faxes from printing unti l they are released. Held faxes can be relea sed manually or at a schedu led day o r ti me. 1 Type th e printe r IP add ress into the addre ss fi eld of your Web b rowser . If you do not know the IP addre ss of the print er, you can: • View th ...

  • Lexmark 032 - page 136

    4 From the “F orward to” menu, s elect on e of the foll owing: • Fax • E ‑ mai l • FTP • LDSS • eSF 5 In the Forward to Sh ortcut fiel d, enter the s hortcu t number where yo u want the fax f orward ed. Note: The shortcut number must be valid for t he setting selected in the “Forward to” menu. 6 Click Submi t . Faxing 136 ...

  • Lexmark 032 - page 137

    Scanning to an FTP address ADF Scanner glass Use the ADF for m ulti ple ‑ page documents. Use the scanner glass for sing le pages, small items (such as postcards or photos), transp arencies, photo paper, or t hin media (such as magazin e clippings) . The scan ner let s you sca n docume nts dir ectly t o a File Transfer Prot ocol (FTP) serve r. On ...

  • Lexmark 032 - page 138

    5 Enter the approp riate in forma tion. 6 Enter a sho rtcut numbe r. If you enter a number th at is alre ady in use , then you are prom pted t o select an other number. 7 Click Add . Creati ng an FTP sh ortcut using the touch screen 1 From the home s cre en, n avig ate to : FTP > type the FTP addres s > > enter a name fo r the short cut &g ...

  • Lexmark 032 - page 139

    Scan ning to an F TP add ress using the ad dres s bo ok 1 Load an o rigina l docum ent fa ceup, sho rt edge fi rst int o the AD F or face down on the scanner glass. Note: Do not l oad po stcards , pho tos, sm all it ems, tr anspa rencies , phot o pap er, or th in me dia (su ch as magazi ne clippings) into the ADF. Place these items on the scanner g ...

  • Lexmark 032 - page 140

    Color This opt ion ena bles or disa bles color for the sca nned im age. Resolution This o ption adjust s th e outp ut qua lity of your file . Incre asing the image resoluti on increa ses th e file s ize and the time needed t o scan your orig inal docum ent. I mage re solutio n can be decreas ed to reduce t he file size. Darkness This option adjust ...

  • Lexmark 032 - page 141

    Scan Previ ew This opt ion di splays the fir st page of the or igina l docume nt befo re it is scanne d comp letel y. Whe n the fir st page is scanned, t he scan ning is p aused a nd a pre view imag e appear s. Advanced Options Touching the Advanced Options b utton opens a screen where you can chan ge the following settings: • ADF S kew Fix —Us ...

  • Lexmark 032 - page 142

    Scanning to a computer or flash drive ADF Scanner glass Use the ADF for m ulti ple ‑ page documents. Use the scanner glass for sing le pages, small items (such as postcards or photos), transp arencies, photo paper, or t hin media (such as magazin e clippings) . The sca nner lets yo u scan d ocum ents dir ectly t o a com puter or a flash d rive. T ...

  • Lexmark 032 - page 143

    c Pres s , and then e nter t he shor tcut number u sing the keypad, or touc h Held Jobs o n the home screen, and then t ouch Profiles . d After ente ring the s hort cut n umbe r, th e sc anner s cans and se nds the docum ent to the dire cto ry or pr ogr am you s peci fie d. I f you touch ed Profiles on the home screen, th en locate your shor tcut o ...

  • Lexmark 032 - page 144

    c Follow t he instr uctions on you r compu ter scr een to de fine the type of docume nt bei ng scanne d and what kind of output you want to cr eate. d Sele ct any o f th e fol lowi ng: • Show MFP In structi ons —View o r print th e instructio ns. • Crea te Sh or tcut —S ave this group of set tings to use ag ain. e Click Finish . A dialog b ...

  • Lexmark 032 - page 145

    • Inkjet —Use when t he origi nal docum ent wa s printe d using an inkj et printe r. • Photo/Film —Use when the original docu ment is a photo from fil m. • Maga zin e —Use when the original docu ment is from a ma gaz ine. • Newspap er —Use when t he origi nal docum ent is f rom a newspap er. • Press —Use w hen the origi nal doc ...

  • Lexmark 032 - page 146

    Understandin g pr inter menus Menus list Supplies Paper Menu Reports Network/Ports Replace Supply Cyan Cartridge Magent a Cartridg e Yellow Cartr idge Black Cart ri dge Cyan Imaging Un it Magent a Imagi ng Uni t Yellow I maging Unit Black Imagi ng Unit Sepa ra to r Pick As semb ly and Roll er Waste Tone r Bottle Fuser Transfer Module Maintenance Ki ...

  • Lexmark 032 - page 147

    Supplies menu Menu item Description Replace Supply Separator Pick Assembl y and Roller Wast e To ner Bottle Lets you reset the supply counter for the separator pi ck assembly and rolle r • Selec t Ye s to reset the supply counter. • Selec t No to exit. Cyan Ca rtridge Early Warning Low Invalid Near End of Life Repl ace Missing Defec tive OK Uns ...

  • Lexmark 032 - page 148

    Menu item Description Black Cartridge Early Warning Low Invalid Near End of Life Repl ace Missing Defec tive OK Unsupported Shows the status of the black toner c artridge Cyan I magin g Unit Early Warning Low Repl ace Missing OK Shows the status of the cyan imagi ng unit Mage nta Imag ing Un it Early Warning Low Repl ace Missing OK Shows the status ...

  • Lexmark 032 - page 149

    Menu item Description Fuser Early Warning Low Repl ace Missing OK Shows the status of the fuser Transfer Module Early Warning Low Repl ace Missing OK Shows the status of the transf er module Maintenance Kit OK Repl ace Shows the status of the maintenance kit Paper menu Default Sourc e menu Menu item Description Default Source Tray [x] MP Feeder Man ...

  • Lexmark 032 - page 150

    Paper Size /Type m enu Menu item Description Tray [x] Size (LEF) L ette r Legal JIS B 4 A3 11 x 17 Universal (LEF) A 4 Specifies the pa per size loaded in each tray Notes: • Letter is the US f actory defa ult setting. A 4 is the intern ational factory default setting. • For trays with automatic size sensin g, only the size detected by the hardw ...

  • Lexmark 032 - page 151

    Menu item Description MP Feeder Siz e Letter Legal Executive JIS B 4 A3 11 x 17 Oficio ( México) Folio Stat em ent Universal 7 3/4 E nvelo pe 9 Envelo pe 10 Env elope DL Envelo pe C5 En ve lope B5 Env elope Oth er En vel op e A4 A5 A6 JIS B 5 Specifies the paper size loaded in the multipurpose feeder Notes: • Letter is the US f actory defa ult s ...

  • Lexmark 032 - page 152

    Menu item Description Manual Paper Size Letter Legal Executive JIS B 4 A3 11 x 17 Oficio ( México) Folio Stat em ent Universal A4 A5 A6 JIS B 5 Specifies the si ze of the paper loaded manually Note: Letter is the US factor y defau lt setting. A4 is the intern ational fac tory default setting. Manual Paper Type Plain Pape r Card St ock Transparency ...

  • Lexmark 032 - page 153

    Menu item Description Manual Envelope Type Envelope Rough Envelope Cust om Ty pe [x ] Sp ecif ies th e ty pe o f env elo pe loa ded manu al ly Note: Envelope is the factory default setti ng. Note: On ly installed trays are listed in this menu. Configu re MP menu Menu item Description Conf igur e MP Cassette Manual First Determines when the printer ...

  • Lexmark 032 - page 154

    Menu item Description Trans pare ncy We igh t Normal Heavy Light Specifies the relative weig ht of the trans parencies loaded Note: Normal is the factory defa ult setting. Recycled Weight Normal Heavy Light Specifies the relative we ight of the r ecycled pape r loaded Note: Normal is the factory defa ult setting. Glossy Weigh t Normal Heavy Light S ...

  • Lexmark 032 - page 155

    Menu item Description Colo red W eig ht Normal Heavy Light Specifies the relative weig ht of the color ed paper loade d Note: Normal is the factory defa ult setting. Light W eight Light Specifies the relative weig ht of the pape r loaded Note: Light is the factor y default setting. Heavy Weight Heavy Specifies the relative weig ht of the pape r loa ...

  • Lexmark 032 - page 156

    Menu item Description Vinyl La bels Loading Off Duplex Determin es whether 2 ‑ sided printing occurs for al l print jobs that spec if y Viny l La bels as the pa per type Note: Off is the factory defa ult se ttin g. Bond Loading Off Duplex Determin es whether 2 ‑ sided printing occurs for al l print jobs that specify Bond as the paper type Note: ...

  • Lexmark 032 - page 157

    Custom Ty pes me nu Menu item Description Custom Ty pe [x] Paper Card St ock Transparency Glossy Rough/Cotton Labels Vinyl Lab els Envelope Associates a pa per or specialty media type with a factory default Custom Type [x] name or a user ‑ defined Custom Name created from the Embedded Web Server or from MarkVision TM Profession al Notes: • Pape ...

  • Lexmark 032 - page 158

    Universal Setu p menu Menu item Description Units of Measure Inches Millimete rs Identifies the unit of measur e Note : Inches is the US factor y default sett ing. Milli meters is the international factory default setting. Portrait Width 3–48 i nche s 76–121 9 mm Sets the portrai t width Note s: • 11.69 inches is the US fact ory default setti ...

  • Lexmark 032 - page 159

    Menu item Description Network Se tup Page Prints a rep ort contain ing informati on about th e network printer settings, such as the TCP/IP addr ess inform ation Note : This menu item appears only in netw ork pri nters or printers conn ected to print servers. Network [x ] Setu p Page Prints a rep ort contain ing informati on about th e network prin ...

  • Lexmark 032 - page 160

    Networ k/P orts m enu Active NIC menu Menu item Description Active NIC Auto [list of available ne twork cards] Notes: • Auto is the factory default setting. • This menu item appe ars only if a n optional networ k card is instal led. Standard Network o r Networ k [x] menus Note: Only acti ve port s appear i n this m enu; all ina ctive ports are ...

  • Lexmark 032 - page 161

    Menu item Description Network Buffer Auto 3KB to [maximum size allowed] Sets the size of the network input buffer Note s: • Auto is t he fac tory d efault setting . • The value can be changed in 1 ‑ KB incre ments. • The maximum size allowed depends on th e amount of memory in the pri nter, the size of the other link buffers, and whether Re ...

  • Lexmark 032 - page 162

    Network Rep orts menu This menu i s av ailable fr om the Ne twork/P orts menu: Netwo rk/Ports > Stand ard Net work or Networ k [x ] > Standa rd Net work S etu p or Netwo rk Setup > Report s or Netw ork Report s Menu item Description Print Setup Pa ge Prints a report cont aining inform ation about the ne twork p rinter settings, such as the ...

  • Lexmark 032 - page 163

    Menu item Descriptio n IP Address Lets you view or change the current TCP/IP address Note: Manually sett ing the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOT P and Enable RARP to Off on systems that support BOOTP and R ARP. Netmask Lets you vi ew or change the current TCP/IP netmask Gateway Lets you v ...

  • Lexmark 032 - page 164

    Netwo rk/Ports > S tanda rd Ne two rk or Net work [ x] > Sta nda rd Ne twork Se tup or Network [x] Se tup > IPv6 Note: This me nu is av ailable o nly for network m odels or prin ters at tached to pr int serv ers. Menu item Description Enable IPv6 On Off Enables IPv6 in the printer Note: On i s the f actory d efault setting. Auto Configurat ...

  • Lexmark 032 - page 165

    Menu item Description Compa tibility 802. 11b/g /n 802. 11n 802. 11b/g Specifies the wireless standard for the wireless network Note: The 802.11b/g/n is the factory default setting. Choose N etwork [list of available ne tworks] Lets you select an available network for th e printer to use View S ignal Q uality Lets you view the quality of the wirele ...

  • Lexmark 032 - page 166

    Menu item Descripti on PS Smar tSwi tch On Off Sets the printer to automat ically switch to PS emulation when a print job rec eived through a USB port requires it, regardless of the defaul t printer language Note s: • On is the factory default setting. • When set to Off, the printer does not exami ne incoming data. The printer uses PCL emulatio ...

  • Lexmark 032 - page 167

    Menu item Descripti on ENA Address yyy.yyy.yyy.yyy Sets the network address information for an external print server Note : This menu item is available only if the printer is attac hed to an extern al print server through the USB port. ENA Netmask yyy.yyy.yyy.yyy Sets the netmask inf ormation for an e xternal pri nt server Note : This menu item is ...

  • Lexmark 032 - page 168

    Menu item Description Para llel Buff er Auto 3KB to [maximum size allowed] Disabled Sets the size of the parallel input buffer Notes: • Auto is the factory default setting. • Disabled turns off job buffer ing. Any print jobs al ready buffered on the printer hard disk are printed before no rmal processing resumes. • The parallel buffer size se ...

  • Lexmark 032 - page 169

    Menu item Description Mac Binar y PS Auto On Off Sets the printer to process Macin tosh binary PostScript prin t jobs Notes: • Auto is the factory default setting. • Off filters print jobs using the stan dard protocol. • On processes raw binary PostScript pr int jobs. ENA Address yyy.yyy.yyy.yyy Sets the network address information for an ext ...

  • Lexmark 032 - page 170

    Menu item Description NPA Mode Auto On Off Sets the printer to perform th e special processing required fo r bidirectiona l communicatio n following the conventions defi ned by the NPA protocol Notes: • Auto is the factory default setting. Auto sets the pri nter to examine data, determine the fo rmat, and then proc esses it appropriately. • Whe ...

  • Lexmark 032 - page 171

    Menu item Description Robust XON Off On Determines whether the printer co mmunicates ava ilability to the computer Notes: • Off is the fac tory d efaul t setti ng. • This menu item appl ies only to the seria l port if Serial Protocol is s et to XON/XOF F. Baud 9600 19200 38400 57600 115200 138200 172800 230400 345600 1200 2400 4800 Specifie s t ...

  • Lexmark 032 - page 172

    Menu item Description SMTP Ti meo ut 5–30 Specifies the amount of time in sec onds before the server stops trying to send an e ‑ mail Note : 30 seconds is the factory default setting. Reply Address Specifies a reply address of up to 1 28 characters in t he e-mail sent by the pri nt er Use SSL Disabled Negotiate Requ ired Sets the printer to use ...

  • Lexmark 032 - page 173

    Menu item Description Edit Building Blocks Edits the Internal Accounts, NTLM, various Setups, Password, and PIN Edit Securit y Templates Adds or edits a Security Template Edit Access Controls Controls access to print er menus, firmwa re updates, held jobs, and other access points Miscellane ous Securi ty Settings menu Menu item Description Logi n R ...

  • Lexmark 032 - page 174

    Menu item Description LDAP Ce rtific ate Veri ficat ion Demand Try Allow Never Allows the user to r equest a server certificat e Notes: • “Demand” means a server certificate is re quested. If a bad cer tificat e is provided or if no c ertificate is provided, the session is termin ated immediately. “Demand” is the factory default setting . ...

  • Lexmark 032 - page 175

    Menu item Descri ption Reserve Job Expiration Off 1 hou r 4 hou rs 24 hours 1 week Sets a time limit on how lo ng the printer stores print jobs for pri nting at a later time Note: Off is the factory d efault setting. Disk Wi ping menu Disk Wipi ng era ses only print jo b data on th e prin ter ha rd dis k th at are not current ly in use by the fil e ...

  • Lexmark 032 - page 176

    Menu item Description Automatic Method Singl e p ass Multiple pass Marks all disk space used by a previous print job a nd does not permit the fil e system to r eu se th is spa ce un ti l it has be en cl ea red Notes: • “Single pass” is the factory def ault setting. • Only automatic wiping e nables users to a ctivate disk wipi ng without hav ...

  • Lexmark 032 - page 177

    Menu item Description Configure Log Enable Audit Enable Remote Syslog Remot e Syslog Serve r Remot e Syslog Port Remote Syslog Method Remot e Syslog Facil ity Log full behavior Admin’s e-mail address Digitall y si gn expor ts Severity of events to log Remote Syslog non-lo gged events E-mail log cle ared alert E-mail log wrapped alert E-mail % ful ...

  • Lexmark 032 - page 178

    Menu item Description NTP Server Lets you view the NTP Server Address Enable Authentication Off On Lets you change the authentic ation setting to on or of f Note: Off is the factor y default setting . Settings menu General Settin gs menu Menu item Description Display L anguage English Francai s Deuts ch Italiano Espanol Dansk Norsk Nederlands Svens ...

  • Lexmark 032 - page 179

    Menu item Description Eco-Mode Off Energy Energy/Paper Paper Minimizes the use of energy, paper, or special ty media Notes: • Off is the factory default setting. Off resets the printer to its factory default settings. • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not. • Energy/Paper minimi ...

  • Lexmark 032 - page 180

    Menu item Description Keyboard Keyboard Type English Francai s Francais Cana dien Deuts ch Italiano Espanol Greek Dans k Norsk Nederlands Svens ka Suom i Portuguese Russian Polski Swiss Ge rman Swiss Fren ch Korean Magya r Turkish Czec h Simplifie d Chines e Tra diti on al C hine se Japanese Custom Key [x] Specifies a languag e for the printer cont ...

  • Lexmark 032 - page 181

    Menu item Description Displayed Information Left side Right sid e Cust om T ext [ x] [x] Toner [x] Imaging Unit Fuser Transfer Module Specifies what is displaye d on the upper le ft and right co rners of the home screen For the Left side and Right side menus, select from the following op tions: None IP Address Hostname Con tact Nam e Location Date ...

  • Lexmark 032 - page 182

    Menu item Description Displayed Information Wast e To ner Bottle Paper Jam Load Paper Service Error s Specifies what is di splayed for Waste Tone r Bottle, Pap er Jam, Load Paper , and Servic e Errors. Available opti ons for e ach button are: Display No Yes Message to Display Defa ult Altern ate Defa ult [tex t en tr y] Altern ate [tex t en tr y] N ...

  • Lexmark 032 - page 183

    Menu item Description One Page Copy Off On Sets copying f rom the scanner g lass to only one page at a time Note: Off i s th e factory def ault setti ng. Audio Feedback Button Feed back On Off Volume 1–10 Sets the audio volum e for the buttons Notes: • On is the factory default setting for B utton Feedback. • 5 is the factor y default setting ...

  • Lexmark 032 - page 184

    Menu item Description Alarms Alarm C ontrol Cartridge A larm Sets an alarm to sound when the pri nter requires operator interven tion Available options for eac h alarm type are: Singl e Continuous Off Notes: • Single i s the fac tory default setting. Single sou nds three quick beeps. • Continuous repeats three beeps every 10 seconds. • Off me ...

  • Lexmark 032 - page 185

    Menu item Description Timeou ts Wait Tim eout Dis able d 15–655 35 sec Sets the amount of time in second s the printer waits for additional data be fore can celing a pr int job Notes: • 40 seconds is the fact ory default setting. • Wait Timeout is ava ilable only when the printer is using PostScript emulatio n. This setting has no effect on P ...

  • Lexmark 032 - page 186

    Menu item Description Press Sl eep Button Slee p Hibernate Do Not hing Determines how the printer responds when pressing the Sleep button in Idle state Notes: • Sleep is the factory default setti ng for Press S leep Button . • Sleep or Hibernate sets the printer to op erate at a lower power configu ration. • If the printer is in Sleep Mo de, ...

  • Lexmark 032 - page 187

    Copy Settin gs me nu Menu item Description Content Type Text/Photo Photo Text Graphics Specifie s the content of the original doc ument Note: Text/P hoto is the factory defau lt setting. Content Source Colo r Las er Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser Specifie s how the origina l document was p roduced Note: Color ...

  • Lexmark 032 - page 188

    Menu item Description Paper Save r Off 2 on 1 P ortrait 2 on 1 Lan dscape 4 on 1 P ortrait 4 on 1 Lan dscape Allows copying two or four sheets of a document on one pag e Note: Off is the facto ry defaul t setti ng. Print Pa ge Borders Off On Specifies whether or not a border is pri nted on the page Note: Off is the facto ry defaul t setti ng. Coll ...

  • Lexmark 032 - page 189

    Menu item Description Separator Sh eets Off Between Copies Between Jobs Between Pages Places a sheet of pap er between pages, copies, or jobs Note: Off is the facto ry defaul t setti ng. Sepa rat or Sh eet So urc e Tray [x] Manual Feeder Specifies the separator sheet source Note: Tray 1 is the factory default setting. Darkness 1–9 Spec if ies the ...

  • Lexmark 032 - page 190

    Menu item Description Allo w Sa ve as Shor tcu t On Off Lets you save custom copy settings as shortcuts Note: On is the factory default setting. Background Remova l ‑ 4 to 4 Adjusts the amount of back ground visible on a copy Note: 0 is the factory default setting . Auto Center Off On Lets you automatically center the c ontent on the page Note: O ...

  • Lexmark 032 - page 191

    Menu item Description Sharpness 1–5 Adjusts the amount of sharpness of a copy Note: 3 is the factory default setting . Temperature ‑ 4 to 4 Enables the user to specify “war m” or “coo l” outputs. "Cool” valu es generate a bluer output than the default, while “warm” values generat e a redder output than the default. Sample Co ...

  • Lexmark 032 - page 192

    Menu item Descripti on Cal ler ID On Off Altern ate Spec ifie s ty pe o f ca ller ID bein g us ed Fax number ma sking Off From lef t From ri ght Specifies the dire ction from where digi ts are masked in an outgoin g fax number Note : The number of characters masked is determined by the “Digits to mask” setting. Digits to mask 0–58 Specifies t ...

  • Lexmark 032 - page 193

    Menu item Description Orig inal Si ze Mixed Sizes Letter Legal Executive Tabloid Folio Stat em ent Universal 4 x 6 in . 3 x 5 in . Busi nes s Card Custom Scan Size [x] A3 A4 A5 Oficio ( Mexico) A6 JIS B 4 JIS B 5 Book Orig inal Auto Si ze Sen se Mixed Sizes Specifie s the paper si ze of the original document Note: Mixed Sizes is the US facto ry def ...

  • Lexmark 032 - page 194

    Menu item Description Darkness 1–9 Lightens or darkens the o utput Note: 5 is the factory default setting . Dial P refix Lets you enter a dialing prefix, such as 99. A numeric entry field is provided. Dialing Pr efix Rules Prefix Rul e [ x] Establishes a diali ng prefix rule Automatic R edial 0–9 Specifies the number of times the printer trie s ...

  • Lexmark 032 - page 195

    Menu item Description Background Remova l ‑ 4 to 4 Adjusts the amount of back ground visibl e on a scanned image Note: 0 is the factory default setting . Color Balance Cya n - Re d Magenta - Green Yellow - Blue Enables an equal balan ce of colors in the scann ed image Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 ...

  • Lexmark 032 - page 196

    Menu item Description Enab le Color Fax Scans Off by def ault On by default Never use Always use Enables color faxing Note: “Off by default” is the factory d efault setting. Auto Conv er t Col or Fa xes to Mo no Faxes On Off Converts all outgoi ng faxes to black and white Note: On is the factory default setting. Fax Receive Sett ings Menu item ...

  • Lexmark 032 - page 197

    Menu item Descripti on Max Spee d 33600 2400 4800 9600 14400 Specifies the maximum speed in baud at whi ch faxes are received Fax Fo rwar ding Print Print and Forwar d Forward Enables forwa rding of re ceived fa xes to anot her recipie nt Forwa rd to Fax E ‑ mail FTP LDSS eSF Specifies the type of recipient to which faxes will be f orwarded Note ...

  • Lexmark 032 - page 198

    Menu item Descripti on Auto Print Logs On Off Enables au tomatic printi ng of fax logs Note : L ogs p rint af ter e very 200 f ax jo bs. Log Paper Source Tray [x] Manual Feeder Specifies the source of th e paper used for printing log s Logs Di splay Remote Fax Name or Rem ote Station Name Dialed Nu mber Specifies whether printed logs display the di ...

  • Lexmark 032 - page 199

    Fax Mode (Fax Server Setup) menu Fax Ser ver mode sen ds the fax j ob to a fa x server for transmi ssion. Fax Server Set up Menu item Description To Form at Lets you enter the information using the v irtual keyboard on the printer touch s creen Reply Address Subject Mess age SMTP Se tup Specif ies SMTP se tup in for mat ion Primar y SMTP Gateway Sp ...

  • Lexmark 032 - page 200

    Menu item Description Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Universal 4 x 6 in . 3 x 5 in . Busi nes s Card Custom Scan Size [x] A3 A4 A5 Oficio ( Mexico) JIS B 4 JIS B 5 Book Orig inal Auto Si ze Sen se Mixed Sizes Specifies the paper size of the document that i s being scanned Note : Letter is the US factor y default se ...

  • Lexmark 032 - page 201

    Menu item Description E ‑ mail Serve r Setup Send me a copy Never appears On by default Off by default Alwa ys O n Sends a copy of the e-mail back to th e sender Note: “Never appears” is the factory defa ult setting. E ‑ mail Serve r Setup Max E ‑ mail size 0–65 535 K B Specifies the maximu m e-mail size in kil obytes Note: E-mails abov ...

  • Lexmark 032 - page 202

    Menu item Description Content Source Colo r Las er Inkjet Photo/Film Magazine Newspaper Press Other Black/ Whit e Lase r Specifie s how the origina l document is produced Note: Color Laser is the factory default setting. Colo r On Off Specifies whether or not copies are pri nted in color Note: On is the factory default setting. Resoluti on 150 d pi ...

  • Lexmark 032 - page 203

    Menu item Description Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Universal 4 x 6 in . 3 x 5 in . Busi nes s Card Custom Scan Size [x] A3 A4 A5 Oficio ( Mexico) A6 JIS B 4 JIS B 5 Book Orig inal Auto Si ze Sen se Mixed Sizes Specifie s the paper size of t he o riginal d ocument Notes: • A4 is the inter national factory defau ...

  • Lexmark 032 - page 204

    Menu item Description E ‑ mail imag es se nt as Atta chmen t Web Link Specifie s how the images will be sent Note: Att achment is th e factor y default s etting. Use Multi ‑ Page TIFF On Off Provides a choice between single-page TIFF files and multiple ‑ page TI FF file s. For a mult iple -p age s ca n ‑ to ‑ e-mail job, either one TIFF f ...

  • Lexmark 032 - page 205

    Menu item Description Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gree n Thre shold 0–255 Default B lue Thresh old 0–255 Specifies which c olor to d rop duri ng scanning, a nd how mu ch to increase or decrease the dropout Notes: • None is the factory default setting for Color Dropout. • 128 is t ...

  • Lexmark 032 - page 206

    FTP Settings menu Menu item Description Forma t PDF (.pdf) Secure PDF ( .pdf) TIFF (.tif) JPEG (.j pg) XPS ( .xps ) Specif ies t he form at of the FTP file Note: PDF (.pdf) i s the factory default setting. PDF Vers ion 1.2–1. 6 A–1a Sets the version level of the PDF file for FTP Note: 1.5 is the fact ory de fault set ting. Content Type Text/Pho ...

  • Lexmark 032 - page 207

    Menu item Description Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Universal 4 x 6 in . 3 x 5 in . Busi nes s Card Custom Scan Size [x] A3 A4 A5 Oficio ( Mexico) A6 JIS B 4 JIS B 5 Book Orig inal Auto Si ze Sen se Mixed Sizes Specifie s the pape r size of the original docum ent Notes: • A4 is the inter national factory defau l ...

  • Lexmark 032 - page 208

    Menu item Description Photo Default 5–90 Sets the quality of a photo imag e in relation to file size and th e quality of the image Note: 50 is the factory default setting. Use Multi ‑ Page TIFF On Off Provides a cho ice between single-page TIFF files and multiple ‑ pag e TIFF fi les. For a mult iple -p age sca n ‑ to ‑ FTP job, either on ...

  • Lexmark 032 - page 209

    Menu item Description Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gree n Thre shold 0–255 Default B lue Thresh old 0–255 Specifie s which col or to drop d urin g scanni ng, and how much to incr ease or decrease the dropout Notes: • None is the factory default setting for Co lor Dropout. • 128 is ...

  • Lexmark 032 - page 210

    Flash Drive me nu Scan Settings Menu item Description Forma t PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.j pg) XPS ( .xps ) Specifies the format of the file to be sent thro ugh FTP Note : PDF (.pdf) is the factory default setting. PDF Vers ion 1.2–1. 6 A ‑ 1a Sets the version of the PDF file to be sent through FTP Note : 1. 5 is the fac tory de f ...

  • Lexmark 032 - page 211

    Menu item Description Orig inal Si ze Letter Legal Executive Tabloid Folio Stat em ent Universal 4 x 6 in . 3 x 5 in . Busi nes s Card Custom Scan Size [x] A3 A4 A5 Oficio ( Mexico) A6 JIS B 4 JIS B 5 Book Orig inal Auto Si ze Sen se Mixed Sizes Specifies the paper size of the document Note : Letter is the US fa ctory default setti ng. A4 is the in ...

  • Lexmark 032 - page 212

    Menu item Description Use Multi ‑ Page TIFF On Off Provides a ch oice between s ingle-page TIFF files and mul tiple ‑ pag e TI FF fi les . For a multiple-page scan to FTP job, either one TIFF file is created containing al l the pages , or multipl e TIFF files are created with one file for each p age. Note s: • On is the factory default settin ...

  • Lexmark 032 - page 213

    Menu item Description Negative Image Off On Creates a nega tive image of the or iginal docume nt Note : Off is the fa ctory d efault settin g. Shadow Deta il ‑ 4 to 4 Adjusts the amount of shadow detail visible on a scanned image Note : 0 is the fact ory de fault setti ng. ADF S kew Fi x Off On Specifies whether or not to f ix slight skew on the ...

  • Lexmark 032 - page 214

    Paper Save r Orientation Auto Landscape Portrai t Specifies the orientation of a multipl e ‑ page document Note: Auto is the factory default setting. The printer chooses between portrait and landscape Paper Save r Off 2 ‑ Up 3 ‑ Up 4 ‑ Up 6 ‑ Up 9 ‑ Up 12 ‑ Up 16 ‑ Up Specifies that mul tiple ‑ page imag es be printed on one side ...

  • Lexmark 032 - page 215

    Print Settings Setup menu Menu item Description Printer Language PS Emulation PCL Emulatio n Sets the default printer lan guage Notes: • PS Emulation is the facto ry default printer lan guage. • Setting a prin ter language as the default does not prevent a software program from sending print jobs that use another printer languag e. Job Waiting ...

  • Lexmark 032 - page 216

    Menu item Description Download Target RAM Flash Disk Sets the storage location fo r downloads Notes: • RAM is the fa ctory defau lt setting . Storing downl oads in RAM is temporary. • Storing down loads in flash memory or on a printer hard disk places them in permanent sto rage. Downloads remain in flash memory or on the printer hard disk even ...

  • Lexmark 032 - page 217

    Menu item Description Log Action at End of Frequency None E ‑ mail Current Log E ‑ mail & Delete Current Log Post Curr ent Log Post & Dele te Current Log Determines how the printer r esponds when th e frequency th reshold expi res Note: None is the factory default setting. Disk Near Full Level 1–99 Off Specifies the ma ximum size of t ...

  • Lexmark 032 - page 218

    Finishing menu Menu item Description Sides (Duplex) 1 sid ed 2 sid ed Specifies whet her duplex (2 ‑ sided) prin ting is set as the default for all print jobs Notes: • 1 si de d is the fa ctor y d efa ult set ti ng. • You can set 2-sided prin ting from the software progr am. For Windows users, click File > Print , and then click P ropertie ...

  • Lexmark 032 - page 219

    Menu item Description Separator Source Tray [x] Manual Feeder Specifies the paper source for separator sheets Note: Tray 1 (standar d tray) is the factory default setting. Paper Save r Off 2 ‑ Up 3 ‑ Up 4 ‑ Up 6 ‑ Up 9 ‑ Up 12 ‑ Up 16 ‑ Up Specifie s that multiple ‑ page images be printed on one side of a sheet of paper Notes: • O ...

  • Lexmark 032 - page 220

    Menu item Description Print Resolu tion 1200 Imag e Q Specifie s the print ed output r esoluti on Toner Darkness 1–5 Lightens or darkens t he printed outp ut Notes: • 4 is t he factor y defaul t setting . • Selecting a smaller number can hel p conserve toner. • If Print Mode is set to Black Only, a setting of 5 increases toner density and d ...

  • Lexmark 032 - page 221

    Menu item Description Color Balance Cya n ‑ 5 to 5 Magenta ‑ 5 to 5 Yellow ‑ 5 to 5 Black ‑ 5 to 5 Reset De faults Adjusts color in printed outpu t by increasing or decreasing the amount of to ner being used for each color Note: 0 is the fa ctory d efault setting. Color Sa mple s sRGB Display sRGB Vivid Display—True Bl ack Vivi d Off—R ...

  • Lexmark 032 - page 222

    Menu item Description Manual Color CMYK Im age US CMYK Euro CMYK Viv id CMY K Off CMYK Text US CMYK Euro CMYK Viv id CMY K Off CMYK Grap hi cs US CMYK Euro CMYK Viv id CMY K Off Customizes the C MYK color conversi ons Notes: • US CMYK is the US factory default setting. US CMYK applies a color conversion table that tries to produc e output that ma ...

  • Lexmark 032 - page 223

    Menu item Description Forma t Fl ash Yes No Formats the fl ash memory Warni ng— Pote ntia l Da mage: Do not turn off the printer whil e the flash memory is being formatted. Notes: • Yes de lete s a ll data st ore d in fla sh me mor y. • No cancels the format request. • Flash memory refers to the memory adde d by installing a flash memory op ...

  • Lexmark 032 - page 224

    Menu item Description Annotations Do Not Print Print Prints annotations in a P DF Note : Do Not Print is the factory default setti ng. PostScript menu Menu item Description Print PS Error Off On Prints a page co ntaining the PostScrip t error Note : Of f is th e facto ry default se tting. Lock PS Startup Mode Off On Enables users to disable the Sys ...

  • Lexmark 032 - page 225

    Menu item Description Font Name Cou rier 1 0 Identifies a specific font and the o ption where it is stored Note : Courier 10 is the factory default s etting. Courie r 10 shows the f ont name , f on t ID , an d t he s tor ag e loc ati on in the pri nte r. The fon t so urc e abbreviation is R for Re sident, F for Flash, K for Disk, and D for downl oa ...

  • Lexmark 032 - page 226

    Menu item Description PCL Emulation Settings A4 Wi dth 198 mm 203 mm Sets the p rinter to prin t on A4 ‑ size pap er Note s: • 198 mm i s the fa cto ry defau lt se tting. • The 203 ‑ mm setting sets the width of the page to allow the pri nting of eighty 10 ‑ pitch characters. PCL Emulation Settings Auto CR after LF Off On Specifi es wheth ...

  • Lexmark 032 - page 227

    HTML menu Menu Item Description Font Name Albertus MT Antiq ue Ol ive Appl e Cha ncery Arial MT Avant Garde Bodoni Bookma n Chi cago Clarendon Coop er B lac k Copperplate Coro net Cou rier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers Joanna MT Lett er G ot hic Lubalin Graph Marigold MonaLi ...

  • Lexmark 032 - page 228

    Menu item Description Margin S ize 8–25 5 mm Sets the page margin for HTML documents Note s: • 19 mm is the factory default setting. • Margin size can be increased in 1 ‑ mm increments. Backgrounds Print Do Not Print Specifies whether to print bac kgrounds on H TML documents Note : Print is the factory default setting. Image m enu Menu item ...

  • Lexmark 032 - page 229

    Menu item Description Print All Guid es Prints all th e guides Copy Guide Provides information about making cop ies and changin g settings Fax Guide Provides information about sending faxes using fax numbers, shortcut numb ers, or the address book, and abo ut changing setting s E ‑ mail Guid e Provides information abou t sending e ‑ mails using ...

  • Lexmark 032 - page 230

    Securing the memory before moving the printer Statement of Volatility Your print er co ntain s vari ous t ypes of m emory t hat a re capa ble of st oring device and network s etting s, info rmatio n from embedded solution s, and user data. The types of me mory—a long w ith the types of data store d by ea ch —are describe d bel ow. • Volatile ...

  • Lexmark 032 - page 231

    Erasing non ‑ volat il e memo ry • Indi vidua l setti ngs, dev ice and ne twork settin gs, secur ity se ttings, and em bedded so luti ons —Erase informa tion and sett ings by selecting Wipe All Setting s in the Config uration menu . • Fax da ta —Erase f ax set tings an d data by sele cting W ipe All Setting s in th e Configu rati on me nu ...

  • Lexmark 032 - page 232

    Configurin g printer hard disk encryption Note: Your pr inter m ay not h ave a hard disk i nstal led. Enabling hard disk encrypt ion helps prevent the loss of sensitive data in the e vent your printe r or its hard disk is stolen. Using the Embedded Web Server 1 From the Em bedded W eb Serv er, cli ck Settings > Se curity > Di sk Encrypti on . ...

  • Lexmark 032 - page 233

    Maintaining the printer Cleaning the exterior of the printer 1 Make sure that the prin ter is turned off and unplu gged from the wall outlet. CAUTION —SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug t he power cord f rom th e wall ou tlet an d disc onne ct all cab les to the printer before proce ...

  • Lexmark 032 - page 234

    3 Scanner glass 4 ADF glas s 3 Wipe the area s shown a nd le t them dr y. 4 Clos e the scanne r cov er. Cleaning the A DF parts Clean th e ADF parts perio dicall y to main tain o ptima l printin g perfo rma nce. Re sidue o n the ADF par ts may ca use p rint quality is sues a nd false 2 8x pape r jam m essages. 1 Turn the prin ter o ff. 2 Slight ly ...

  • Lexmark 032 - page 235

    6 Reinsert the pi ck roller assem bly. 1 2 7 Wipe the entire surface under the ADF cover, including the two small white rollers. 8 Clos e th e ADF cov er. Cleaning the printhead lenses 1 Open the fro nt door . Maintai ning the pr inter 235 ...

  • Lexmark 032 - page 236

    2 Turn the t oner l ock lev er to the rig ht an d pull the to ner car tri dge ou t. 2 1 3 Remove the imagin g unit: a Open the internal cover. b Push th e imag ing unit l ock lever up and pull out t he imagin g unit. 1 Maintai ning the pr inter 236 ...

  • Lexmark 032 - page 237

    4 Locate the LED wipe at the en d of the ima ging unit. Make s ure it is in the c orrect posit ion. 5 Reins tal l the ima gin g uni t. Wh en ins ert ed int o the pr inte r, t he LED wipe will rub ac ross the row of LEDs, thus cleaning the printhead lenses. a Insert t he imagi ng unit in to th e printer until it clicks into p lac e. Maintai ning the ...

  • Lexmark 032 - page 238

    b Using b oth hands , push t he side s of t he inter nal cov er firml y until t he cove r clicks into place. 2 2 1 6 Insert the t oner cartri dge into t he printer and th en turn the toner lock le ver to the l eft. 2 1 7 Repeat st ep 2–6 to for all im aging uni ts. 8 Clos e th e fron t door . Storing supplies Choose a cool , cle an stor age are a ...

  • Lexmark 032 - page 239

    • Salty a ir • Corros ive gases • Heavy dust Checking the stat us of supplies A message app ears on the display whe n a replacement supply item is neede d or when maintenance is required . Checki ng the status of supp lies from the printe r control panel From th e home screen , touch Statu s/S uppl ies > Vi ew Suppl ies . Checki ng the sta ...

  • Lexmark 032 - page 240

    Recommended toner cartridges and part numbers Part name Part number Black h igh ‑ yield toner cartridg e X925H2KG Cyan high ‑ yield toner ca rtridge X925H2CG Magenta high ‑ yi el d tone r ca rtri dge X92 5H2 MG Yellow high ‑ yield toner c artridge X925H2YG Ordering imagin g u nits When 84.xx [Color] imaging u nit low , or 84.xx [Color] imag ...

  • Lexmark 032 - page 241

    Part name Part number Waste toner bottle C925X76G Ordering ADF replacement pa rts Order ADF rep lacement parts if you experience problems wi th paper double-feeding or f ailing to feed t hrough the ADF. Part name Part number ADF sepa rator roll 40X632 8 ADF pic k roll 40X6 327 Replacing Supplies Replacing an imaging un it 1 Open the fro nt door . W ...

  • Lexmark 032 - page 242

    3 Push the i maging u nit lock lever up and pu ll out th e imaging unit wi th the to ner cart ridge atta ched to it. 1 4 Unpack the r eplacement imaging unit. 5 Peel off the black protective sheet and the toner sealing tape. 2 1 6 Inse rt the ima ging u nit in to th e print er unti l it clic ks it into place. 7 Using both hands, push the sid es o f ...

  • Lexmark 032 - page 243

    8 Unpack the toner cartri dge , and t hen shak e it to red istr ibute the toner . 9 Peel off the toner sealing tape. 10 Insert the t oner cartri dge and turn the lock lever to the left . 2 1 11 Clos e th e fron t door . Maintai ning the pr inter 243 ...

  • Lexmark 032 - page 244

    Replacing a toner cartridge 1 Open the fro nt door . Warning—Pote ntial Da mage: To avoid ov erexpo sing the im aging units, do not l eave the door open fo r mo re than 10 minu tes. 2 Turn the t oner l ock lev er to the rig ht an d pull the to ner car tri dge ou t. 2 1 3 Unpack the toner cartri dge , and t hen shak e it to red istr ibute the tone ...

  • Lexmark 032 - page 245

    4 Peel off the toner sealing tape. 5 Insert the new cart ridge into the printer and then turn the ton er lock lever to the left. 2 1 6 Clos e th e fron t door . Maintai ning the pr inter 245 ...

  • Lexmark 032 - page 246

    Replac ing the waste tone r bottle 1 Turn the prin ter o ff. 2 Open the fro nt door . 3 Open t he in ternal cove r. 4 Pul l out the used waste toner bottl e. 5 Unpack the new waste toner bottle. Maintai ning the pr inter 246 ...

  • Lexmark 032 - page 247

    6 Insert th e new waste ton er bott le into the pr inte r. 7 Using both han ds, pu sh the sid es of the inter nal co ver firmly un til it clicks into pla ce. 2 2 1 8 Clos e th e fron t door . 9 From the pr inter co ntro l pan el, rese t th e Wast e Toner Bo ttle c ounte r in t he Suppl ies menu. Moving the printer Before moving the printer CAUTION? ...

  • Lexmark 032 - page 248

    • Lift t he p rinter o ff th e optio nal t ray, and t hen set it asid e ins tead o f trying to l ift the tray and prin ter a t the s ame time. Note: Use the ha ndho lds loca ted on bo th sid es of th e print er to li ft it. Warn ing —Pot ent ial D amag e: D amage t o the p rinter caused by impr oper mo ving is not c overed by the p rinter warra ...

  • Lexmark 032 - page 249

    Administrative support Finding adva nced networking and ad ministrator in formation This chapt er co vers ba sic adm inis trative suppor t ta sks using the Em bedded W eb Serv er. For more ad vanc ed syst em suppor t tasks , see t he Networking Guide on the Softwa re and Docum entation CD and the Emb edded W eb Server Administr ator's Guide on ...

  • Lexmark 032 - page 250

    If you do not know the IP addre ss of the print er, you can: • View the I P address on the pr inter control panel in the TCP/IP sectio n under the Netwo rks/Port s menu. • Print a netw ork se tup p age or the me nu s etting s pag es and locat e the I P addr ess i n the TCP/I P se ction. 2 Click Devi ce St atu s . The devic e status sh ows the f ...

  • Lexmark 032 - page 251

    Restoring factory d efault se ttings If you want to ret ain a lis t of the cur rent menu se ttings for re ferenc e, th en print a m enu s etting s page bef ore restori ng the factory default set tings. Warn ing —Pot ent ial D amag e: Restoring fac tory defau lts retu rns most pri nter se ttings to the origi nal fac tory defaul t setting s. Exc ep ...

  • Lexmark 032 - page 252

    Clearin g jams By carefull y select ing pap er and loadin g it properly, you c an avoi d most jams . If jams do occur, follow the step s outl ined in thi s se ction. To cle ar a jam mess age an d res ume pr inti ng, cl ear the enti re pa per p ath, and then touc h Continue , jam cle ared . If Ja m Recovery i s se t to O n, th en the print er prin t ...

  • Lexmark 032 - page 253

    4 5 1 2 3 6 7 Area Jam numbers What to do 12 8 0 ‑ 289 1 Remove all pape r from th e ADF. 2 Flex and stack the p aper. 3 Reload the AD F. 4 Adjust the paper guid e. 5 Touch Continue, jam cleared . 22 0 0 ‑ 201 Open the side cover, and then remove any jams. 32 5 0 1 Remove al l media from the multipurpose feeder. 2 Flex and stack the medi a. 3 R ...

  • Lexmark 032 - page 254

    200 paper jam 1 Open the sid e door. CAUTION —HOT SU RFACE: The inside of t he printer might be hot. To reduce the ris k of injur y from a hot component, allow the surface to cool before t ouching. 2 Pull th e jamm ed pape r up a nd out t o remo ve it fro m the paper p ath. Notes: • Make sur e all pap er f ragment s are r emoved. • If the pag ...

  • Lexmark 032 - page 255

    201 paper jam 1 Open the sid e door. CAUTION —HOT SU RFACE: The inside of t he printer might be hot. To reduce the ris k of injur y from a hot component, allow the surface to cool before t ouching. 2 Determine where the jam is located, and then remove it: a If the pa per is v isible u nder t he fuser , then g rasp it on ea ch side and pull it out ...

  • Lexmark 032 - page 256

    • If the paper is in the fuser, th en the fuser nip re lease lever should be lowe re d an d shou ld be s witche d to envelo pe mode. • After removi ng the ja mmed paper , return the lever to the prop er positio n. 3 Align the f user uni t usi ng th e han dle s on each side, and t hen plac e it back into the pr int er. 3 Clos e th e side door. 4 ...

  • Lexmark 032 - page 257

    230 paper jam 1 Open the sid e door. 2 Hold onto the handles of the duplexing unit, open th e cover, and then remove an y jammed paper. CAUTION —HOT SU RFACE: The inside of t he printer might be hot. To reduce the ris k of injur y from a hot component, allow the surface to cool before t ouching. 3 Close the cover on the du plexing unit. 4 Clos e ...

  • Lexmark 032 - page 258

    3 Clos e the cover o f the duplexin g uni t. 4 Clos e th e side door. 5 Touch C ontin ue, j am clea red . 24x paper jam Paper jam in Tray 1 1 Check the side access door to tr ays and then pull the jammed pa ges out. Note: M ake sure all paper fragmen ts are re moved. Clearing jams 258 ...

  • Lexmark 032 - page 259

    2 Open Tray 1, and then pull t he jamme d pages straig ht up and out. Note: M ake sure all paper fragmen ts are re moved. 3 Close Tray 1. 4 Touch C ontin ue, j am clea red . Paper jam in one of t he optional t rays 1 Check the side access door to tr ays and then pull the jammed pa ges out. Note: M ake sure all paper fragmen ts are re moved. Clearin ...

  • Lexmark 032 - page 260

    2 Open the spec ified tray, a nd then pull t he jammed pages out. Note: M ake sure all paper fragmen ts are re moved. 3 Clos e th e tray. 4 Touch C ontin ue, j am clea red . Clearing jams 260 ...

  • Lexmark 032 - page 261

    250 paper jam 1 Remove any jammed pages from the multipurp ose feeder. 2 Load pap er int o the multi purpose f eede r. 3 Touch C ontin ue, j am clea red . 280–289 paper jams 1 Remov e all orig inal docu ment s from the A DF. 2 Open t he A DF c over. 1 Clearing jams 261 ...

  • Lexmark 032 - page 262

    3 Grasp t he jammed paper on each si de, and then gent ly pull i t out. Note: M ake sure all paper fragmen ts are re moved. 4 Clos e th e ADF cov er. 5 Reload original documents back into the ADF, st raighten the stack, and th en adjust the paper guide. 6 From the pr inter co ntro l pan el, touc h Co ntinue , jam cleare d . 290–292 paper jams 290 ...

  • Lexmark 032 - page 263

    Troubleshooting Solving basic printer problems If there are basi c print er prob lems, o r the pr inter is unresp onsive, make sure: • The po wer co rd is plug ged in to th e print er and a p roperly gro unded ele ctric al out let. • The electrical outlet is not turned off by any switch or breaker. • The print er is not plug ged in to any s u ...

  • Lexmark 032 - page 264

    Change [paper source] to [custo m type name] lo ad [orientation] Try on e or more of the follo wing • Touch U se curr ent [pa per sour ce] to ignore the message and print from the selected t ray. • Load the corr ect pape r siz e and ty pe in th e tray, verif y the paper s ize and type se ttings are spe cified i n th e printe r cont rol pa nel P ...

  • Lexmark 032 - page 265

    Close fron t or side door Close the fr ont or si de door of th e print er . Disk corrupted The pri nter a ttempte d a ha rd di sk reco very on a corr upted hard disk, a nd the h ard d isk cann ot b e repair ed. The hard disk must be reform atte d. Touch Fo rma t d isk to reformat the pr inter hard di sk and clea r the messa ge. Note: Forma tting d ...

  • Lexmark 032 - page 266

    Load [src] with [cus tom type name] Try on e or more of the follo wing: • Load the specified paper in the tray or feed er. • Touch Pa per loade d, continu e to cle ar the m essage and c ontinue print ing. If the printer finds a tray that has the co rrect paper ty pe and siz e, it fee ds fro m that tray . If the pri nter can not f ind a tray wi ...

  • Lexmark 032 - page 267

    Load Manual Feeder with [custom s tring] Try on e or more of the follo wing: • Load the specified paper in the manual feeder. • Touch Prompt each page , pape r lo aded or Do not pro mpt, paper lo ade d to c lea r the messa ge a nd cont inue p rin ting . • Touch Automatically s elec t paper to use th e paper loaded in the tray. • Cancel the ...

  • Lexmark 032 - page 268

    Some h eld jo bs were not re stored Touch Continue to delete the specifi ed job. Note: Held jobs t hat are not restored s tay on th e hard dis k and are in access ible. Supp ly nee ded to co mplete jo b A supply needed to complete t he job is missing. Touch Cancel t o clear the message. Tray [x] paper si ze unsupported The paper size in t he speci ...

  • Lexmark 032 - page 269

    34 Incorrect paper siz e, open [src] Try on e or more of the follo wing: • Load the appropriate paper or specialty media in the proper tray. • Confirm th at the wheel on tray 1 i s set to the p aper size lo aded in the tray. Make sure this size is the size yo u are trying to prin t. • Touch Continue to clear th e message and print using a dif ...

  • Lexmark 032 - page 270

    37 In suffici ent me mory, some held jo bs will not b e res tored The pr int er was una ble to resto re so me or al l of t he con fid ential or hel d jobs on th e pr inte r hard di sk. Touch Continue to clear th e me ssag e. 38 Memory full Try on e or more of the follo wing: • Touch Cancel job to clear the message. • Install addit ional printer ...

  • Lexmark 032 - page 271

    • Touch Continue to continue p rinting . • Turn th e prin ter po wer off a nd the n back on to re set th e prin ter. 54 Standard network software error Try on e or more of the follo wing: • Touch Continue to continue p rinting . • Turn th e prin ter o ff and th en ba ck on to re set t he printe r. • Upgrade (f lash) the network fir mware ...

  • Lexmark 032 - page 272

    56 Standard parall el port disabl ed Try on e or more of the follo wing: • Touch Continue to clear th e message. The print er di scards a ny data rece ived thr ough t he pa rallel port. • Make sure the Parallel Buffer menu item is not set to Disabled . 56 Standard USB p ort disabled Try on e or more of the follo wing: • Touch Continue to clea ...

  • Lexmark 032 - page 273

    3 Remove the excess di sks. 4 Connect the power cord to a properly gro unded electrical outlet. 5 Turn the pr inter back o n. 58 Too ma ny flash op tions i nstalle d 1 Turn the prin ter o ff. 2 Unplug the po wer co rd fr om th e wall ou tlet . 3 Remove the excess flash mem ory. 4 Connec t th e pow er cord to a p roper ly gr ounded outle t. 5 Turn t ...

  • Lexmark 032 - page 274

    80.xx Fuser life warning • Order a repla cement fuser im media tely. Wh en prin t qual ity is re duced, install t he ne w fuser, followi ng the instr uction sheet that came with the replacement part. • Touch Continue to clear the message and conti nue print ing. 80.xx Replace fuser Replace the fuser using t he instruction sheet that came with t ...

  • Lexmark 032 - page 275

    84 Defective [co lor] imagi ng unit The spec ified im aging unit i s either missing or not fu nction ing prop erly. T ry one or mor e of the fo llowin g: • Remo ve the spec if ied im agi ng u nit, a nd th en re ins tall i t. • Remo ve th e spec if ied im agi ng u nit , a nd t hen ins tall a new o ne . 84.xx [color] imagin g unit nearly low 1 Or ...

  • Lexmark 032 - page 276

    3 Firmly s hake the cart ridge sid e ‑ to ‑ side and fr ont ‑ to ‑ back sever al time s to redi stribu te the ton er. 4 Reinsert the cartridge, and then touch Contin ue t o clear the message and continue printing. Note: Repeat this pr ocedur e mul tiple t imes un til th e prin t rem ains f aded, a nd then rep lace th e cartri dge. 88.2x Rep ...

  • Lexmark 032 - page 277

    C HECK IF THE ST ANDARD EX IT BIN IS FU LL Remove the paper s tack from the standard exit bin. C HECK IF THE PAPER TRA Y IS EMP TY Load p aper i n th e tr ay. M AKE SURE THE CORRECT PRIN TER SOFTWARE IS I NSTALLED • Verify that you are using the cor rect printer software. • If the pr inter is connect ed to you r comp uter t hrough a U SB port , ...

  • Lexmark 032 - page 278

    M AKE SURE THE PRINTER HAS SUFFICIENT ME MORY Free up a dditio nal prin ter m emory by s crolling throu gh the list of he ld jobs a nd dele ting s ome of t hem. Print jo b ta kes lo nger than e xpected Try on e or more of the follo wing: R EDUC E THE COM PLEXITY OF THE PRINT JOB Eliminate the number and size of fonts, the number and complexity of i ...

  • Lexmark 032 - page 279

    U SE THE SAME P APER S IZE AN D P APER T YPE SETTINGS • Print a menu sett ings page and compa re th e se ttin gs for ea ch tray . • If necessary, adjust the settin gs from the Paper Size/Type menu. Note: The standar d 550-sheet tra y and the multipu rpose feeder do not automatica lly sense the pa per size. You must se t the size fr om the Pa pe ...

  • Lexmark 032 - page 280

    C HECK THE POWER Make sur e the pr inter is plugged i n, the po wer is on, and Ready app ears. Scanner un it does not clo se Make sure there are no ob structions: 1 Lift the s canner unit. 2 Remove any obstruction keeping the s canner unit open. 3 Lower th e sc anner unit. Poor copy quality These are some examples of po or copy quality: • Blank p ...

  • Lexmark 032 - page 281

    M AKE SURE THE QUALITY OF THE ORIGINA L DOCUM ENT IS SATI SFA C TOR Y Check the quality of the original document. P LACE THE ORIGINAL DOCUMENT PROPERLY Make s ure the docume nt or phot o is loaded facedown on the scanne r gla ss in t he upper left co rner. M AKE SURE TO USE THE APPROPRIATE C OP Y SETTINGS When patt erns (moi ré) appea r in the ou ...

  • Lexmark 032 - page 282

    C HECK THE PAPER SI ZE SETTING Make s ure th e pap er size s etting mat ches th e pap er lo aded i n the tr ay: 1 From t he prin ter c ontrol pane l, che ck the P ape r Size sett ing fr om th e Pape r men u. 2 Before sendin g the job to print , spe cify the cor rect size settin g: • For Window s users, specify t he size from Pr int Propert ies. ? ...

  • Lexmark 032 - page 283

    T HE SCAN RE SOLUTI ON MAY BE SET TOO HIG H Select a l ower scan r esoluti on. Poor scanne d image qu ality These are possible solution s. Try one or more of t he following: C HECK THE DISPLAY FOR ERR OR MESSA GES Clear any error messages . T HE SCANNER GLASS MAY BE DIRTY Clean the scan ner glass with a c lean, lint ‑ free clo th dampened with wa ...

  • Lexmark 032 - page 284

    Cann ot sca n fro m a comp uter These are possible solution s. Try one or more of t he following: C HECK THE DISPLAY FOR ERR OR MESSA GES Clear any error messages . C HECK THE POWER Make sur e the pr inter is plugged i n, the po wer is on, and Ready app ears. C HECK THE CABLE CONNECTIONS Make sur e the ne twork o r USB ca ble is se curely co nnecte ...

  • Lexmark 032 - page 285

    Cann ot se nd or receive a fax These are possible solution s. Try one or more of t he following: C HECK THE DISPLAY FOR ERR OR MESSA GES Clear any error messages . C HECK THE POWER Make sur e the pr inter is plugged i n, the po wer is on, and Ready app ears. C HECK THE PRINTER CONNECTIONS Make sure the cable conn ection s for the follow ing hardwar ...

  • Lexmark 032 - page 286

    T EMP ORA RIL Y DISCONNECT OT HER EQUIPMENT To ensure the printer is wo rking correctl y, connect i t di rectly to the telephone li ne. Disc onnect any answeri ng machines , computers with mo dems, or telep hone line sp litters. C HECK FOR JAMS Clear any ja ms, and th en make sure th at Ready appe ars. T EMP ORA RIL Y DISA BLE C ALL W AITING Call W ...

  • Lexmark 032 - page 287

    R EPL ACE THE TONE R OR PRINT CARTRIDGE Repl ace the tone r or pr int c artri dge. Can rece ive but no t send faxes These are possible solution s. Try one or more of t he following: T HE PRINTER IS NOT IN F AX MODE On the ho me scree n, touch Fax to put t he printe r in Fa x mode. T HE DOCUME NT IS NOT LOAD ED PROP ERL Y Load th e origi nal doc ume ...

  • Lexmark 032 - page 288

    3 In the Max Speed box, click one of th e following: 2400 4800 9600 14400 33600 4 Click Submit . Solving home screen applications problems An appl icat ion e rror has occurred C HECK THE SYSTEM LOG FOR RE LEVA NT DETAILS 1 Type the prin ter IP address or hos t name in t he addr ess fiel d of your Web b rowser. If you do not know the IP a ddress or ...

  • Lexmark 032 - page 289

    Solving option problems Option does not op erate correctly or quits af ter it is instal led Try on e or more of the follo wing: R ESE T THE PR I NTER Turn the pr inter o ff, wa it for a bou t 10 sec onds, and the n t urn the printe r on. C HECK TO SEE IF THE OPTION IS C ONNECTED TO THE PRINTER 1 Turn th e prin ter off usi ng the p ower swit ch. 2 U ...

  • Lexmark 032 - page 290

    M AKE SURE THE PAPER TRA Y IS INSTALLED CORRECT LY If the paper tray is listed on th e menu settings page, but paper jams when it enters o r exits the t ray, then it may not be properly ins talled. Rein stall the p aper tray. F or more information , see the hardwa re setup do cument ation that came wi th th e pap er tray, or go to ht tp:/ /suppo rt ...

  • Lexmark 032 - page 291

    Memory card Make su re the m emor y card is s ecure ly co nnected to th e printe r system board. USB/parallel interface card does no t operat e cor rectl y C HECK THE USB/ PA RALLEL INTERFACE CARD CO NNECTION Make sure th e USB/parallel interface c ard is secure ly connected t o the printer s ystem boa rd. C HECK THE CABLE Make sur e you are using ...

  • Lexmark 032 - page 292

    Jammed pag es are not reprin ted T URN ON J AM R ECOV ERY 1 From th e home screen , navigate to : > Settings > Gene ral Se ttings > Print Recovery 2 Touch the arro ws next to Jam Recovery until On or Auto ap pears. 3 Touch Submit . Solving print quality problems If these sugg estions do not corr ect the problem, th en contact customer su p ...

  • Lexmark 032 - page 293

    Fine horizon tal line s appear on color page s You may no tice fine , horizo ntal l ines in photogr aphs o r page s with a high co ncentr ation o f color. This can occur wh en the printe r is in Quiet M ode. To fix th is, set Quiet Mo de to Off (Image/Photo) . Gray back ground ABCDE ABCDE ABCDE C HECK THE T ONER D ARKNESS SETTING Select a lig hter ...

  • Lexmark 032 - page 294

    C HECK THE PAPER SI ZE SETTING Make s ure th e pap er size s etting mat ches th e pap er lo aded i n the tr ay: 1 From the printe r con trol pan el Pape r menu , check the Pa per S ize set ting. 2 Before sendin g the job to print , spe cify the cor rect size settin g: • For Window s users, specify t he size from Pr int Propert ies. • For Maci n ...

  • Lexmark 032 - page 295

    Paper curl Try on e or more of the follo wing: C HECK THE PAPER TYP E AN D WEIG HT SETTINGS Make sur e the pap er type and weight se ttings match t he pape r loaded in the t ray or feede r: 1 From the printe r con trol pan el Paper menu , check th e Pape r Type an d Paper W eight settin gs. 2 Befo re se nding the prin t job, spec ify th e co rrect ...

  • Lexmark 032 - page 296

    M AKE SURE THE TRANSF ER MODU LE IS NOT DEFECT IVE Replace the defective transfer module. For more inform at ion, see the ins tructi on sheet th at came w ith the replacement part. M AKE SURE THE FUSER IS NOT DE FECTIVE Replace the defective fuser. For more informatio n, see the instru ction sheet that ca me wi th the replacement part. Print i s to ...

  • Lexmark 032 - page 297

    M AKE SURE THERE IS NO DEFECTI VE TONER CART RIDGE Replace the defective toner ca rtridge. Print is too ligh t Try on e or more of the follo wing: C HECK THE DARKNESS , BRIGHTN ESS , AND CONTRAST SETTINGS The Toner Darkness s etting may be too li ght, the Bri ghtnes s sett ing may be too light , or the Contr ast se tting m ay be too low . • Chang ...

  • Lexmark 032 - page 298

    3 Reinser t the ton er cartridg e. Note: If print qualit y does n ot improv e, re place t he print cart ridge. If the p roblem contin ues, th e print er m ay need t o be ser vice d. For m ore i nform ation, contact cust omer su pport . M AKE SURE THERE IS NO DEFECTI VE TONER CART RIDGE Replace the defective toner ca rtridge. Printer is printing bl ...

  • Lexmark 032 - page 299

    Cause Sol uti on The transfer module is defec tive. Replace the transf er module if the defects occ ur every: • 38 mm ( 1.5 0 in.) An imaging unit is defec tive. Replace the imaging u nit if the defect s occur ever y: • 41.0 mm (1.61 i n.) • 75.0 mm (2.95 i n.) If marks occur down the pag e repeatedly in all col ors: The fuser is defec tive. ...

  • Lexmark 032 - page 300

    If the p roblem c ontin ues, th e print er m ay need to be ser viced. F or m ore i nformati on, co ntact Custom er Suppo rt. Skewed pri nt These are possible solution s. Try one or more of t he following: C HECK THE PAPER GUIDES Move the length and width guides in the t ray to the correct positio ns for the pap er size loaded. • Make sure th e gu ...

  • Lexmark 032 - page 301

    Streaked hori zontal li nes appe ar on p rints ABCDE ABCDE ABCDE Try on e or more of the follo wing: S ELEC T ANOTHER TR AY OR FEEDER • From the printer contr ol pane l Paper M enu, se lect Def ault S ource. • For Wi ndows users , sele ct the paper s ource from Print P roper ties. • For Ma cintosh users , sel ect the paper s ourc e from the P ...

  • Lexmark 032 - page 302

    M AKE SURE THERE IS NO WORN , DEFECT IVE , OR EMPTY TONER CARTRIDGE Replace the worn, defective, or empty to ner cartridge. C LEAR THE PAPER PAT H ARO UND THE TONER CARTRID GE Check t he pape r path aroun d the t oner cartri dge. CAUTION —HOT SURFA CE: The inside of the prin ter m ight be hot. To r educe t he risk of injury from a h ot component, ...

  • Lexmark 032 - page 303

    Transparency print qu ality is poor Try on e or more of the follo wing: C HECK THE TRANSPARENCIES Use only transp arencies that meet the p rinter specifications. C HECK THE PAPER TYP E SETTING Make s ure th e pap er type s ettin g is s et t o Tran spar ency: 1 From the printe r con trol pan el Paper menu , check th e Pa per Type s etting . 2 Before ...

  • Lexmark 032 - page 304

    What is CMYK color? Cyan, mag enta, yell ow, and b lack (kno wn as CMYK co lor ) inks or t oners can be printe d in va rious amo unts to prod uce a large range of colors observed in nature. For example, cyan and ye llow can be combin ed to create gr een. Pri nting presses, inkjet pr inters, an d color las er/LED p rinters cr eate colo rs in thi s m ...

  • Lexmark 032 - page 305

    Manual Co lor Correct ion applies to RGB and CMYK color conv ersion t able mapp ings as de fined in the Ma nual Col or menu. You can s elect any of the diffe rent c olor conv ersion tables for RG B or CMYK: Color conversion table Settings RGB • sRGB Di spl ay • Display–True Black • sRGB Vi vid • Vivi d • Off CMYK • US C MYK • Eur o ...

  • Lexmark 032 - page 306

    Color specification and object to be pri nt ed Color Correction se tting Sample pages to use RGB—Text Auto sRGB Vivid Manual Manual Color RGB Text Setting RGB—Graphi c Auto sRGB Vivid Manual Manual Color RGB Graphic Setting RGB—Image Auto sRGB Di splay Manual Manual C olor RGB Image S etting CMYK—Text Auto US CMYK or Euro CMYK Manual Manual ...

  • Lexmark 032 - page 307

    C HECK THE ADDRESS ENTERED IN THE W EB BROWSE R • Depending on the ne twork s etting s, you may ne ed to type “ https:// ” instead of “ http:// ” before the printer IP ad dress to ac cess t he Embedd ed We b Serv er. Fo r more i nform ati on, co ntac t your sys tem su ppor t pers on. • Make sur e pr int er IP add res s is c orre ct. T E ...

  • Lexmark 032 - page 308

    Notices Prod uct i nfor mat ion Produc t name: Lexmark X925, XS925 Machin e type: 7541 Mode l(s): 032, 036, 096 Edition notice November 2012 The foll owing p aragraph does not ap ply to any coun try whe re su ch provisio ns are incon sistent with l ocal law : LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOU T WARRANTY OF AN ...

  • Lexmark 032 - page 309

    Trademarks Lexmark, Lexm ark wi th diamo nd desi gn, Ma rkNet , and M ark Visi on ar e trad ema rks of Le xma rk Int ern ati onal , Inc ., registered in the Un ited States and/or other countries. PrintCrypt ion and ScanBa ck are tradem arks of Lex mark Int ernational, I nc. Mac and the Mac logo are trademarks of Apple In c., registered in the U.S. ...

  • Lexmark 032 - page 310

    Noise emission levels The following measuremen ts were made in acc ordance with ISO 7779 and reported in conform ance with ISO 9296. Note: Some mo des ma y not apply t o your p roduct. 1-meter average sound pressure, dBA Printing 53 dBA Ready 39 dBA Values are subject t o change. See www .lexmark .com for curren t values. Waste from Electrical and ...

  • Lexmark 032 - page 311

    ENERGY STAR Any Lex mark product bea ring th e ENE RGY ST AR em blem o n the pr oduct or on a start -up scr een is cert ifi ed to c omply with Env ironmen tal Pro tectio n Agenc y (EPA ) ENE RGY STAR r equire ments as con figur ed when s hipped by Lexmar k. Temperature information Ambient temperature 15.6 to 32.2°C (60 to 90°F) and 8 % to 80% RH ...

  • Lexmark 032 - page 312

    The power consumption levels listed in the previous table represen t time-averaged measurements . Instantaneous power draws may be s ubstanti ally hi gher tha n the aver age. Values are subject t o change. See www .lexmark .com for curren t values. Sleep Mode This product is design ed with an energy-saving mode called Sleep Mo de . The Sleep Mode s ...

  • Lexmark 032 - page 313

    Radio interference notice Warning This is a produc t that com plies with the emission requi rements of EN55022 Class A limits a nd immunity requir ements of EN55024. This pr oduct is not inten ded to be used in residen tial/dom estic enviro nment s. This is a Clas s A produ ct. In a domes tic envi ronm ent, th is produc t ma y cause ra dio inte rfe ...

  • Lexmark 032 - page 314

    connec ted. An appro priat e AC surge arr estor is def ined as on e that is sui tably rate d, and cer tified by UL (Underwr iter' s Laborato ries), anothe r NRTL (National ly Recognized Testing Laborato ry), or a recog nized sa fety certi fication body in the countr y/regi on o f use. Th is is to avo id dama ge to th e equi pmen t cause d by l ...

  • Lexmark 032 - page 315

    to its n etwork. It indi cates no endo rsemen t of t he prod uct b y Teleco m, nor do es it pr ovide any sort of warr anty. Above all, it provid es no ass urance that any item wil l work co rrectly in a ll resp ects with anothe r item of te leperm itted equipm ent of a diff erent make or mo del, nor d oes it imply t hat any prod uct i s compati ble ...

  • Lexmark 032 - page 316

    Not ice to User s in the Euro pea n Uni on Produ cts bearin g the CE mark are in c onformi ty with the pr otectio n requiremen ts of EC Council dir ectives 2004/108/EC, 2006/95/EC, an d 1999/5/EC on th e approxim ation and harmon ization of th e laws of th e Member States relating to electromagnetic compatibility, safety of electrical equipment de ...

  • Lexmark 032 - page 317

    Industry Canada (Canada) Cet app areil e st conf orme à la no rme RSS-210 d'Indus try Cana da. S on fon ction nement est soum is aux deux c onditio ns suiva ntes : (1) cet appare il ne do it pas p rovoq uer d' inter férence s et (2 ) il doit accept er toute inte rférenc e reçue , y compr is cel les risquan t d'a lté rer s on fon ...

  • Lexmark 032 - page 318

    Operation is allowed i n all EU and EFTA co untries, but is restric ted to in door use o nly. The manufa cturer of t his prod uct is: Lexmark Inter national, I nc., 740 W est Ne w Circle Road , Lexington, K Y, 40550 USA. The authorized representat ive is: Lexmark International Te chnolo gy Hu ngá ria Kf t., 8 L ech ner Ödö n f asor , Mill enni u ...

  • Lexmark 032 - page 319

    Malt i Bil -p re ż enti, Lexmark In ternat ional, I nc., jidd ikjara li dan il-prod ott huwa kon formi mal - ħ ti ġ ijie t essenzjali u ma dispo ż izzjon ijiet o ħ raj n relevanti l i jinsabu f id-Dire ttiva 1999 /5/KE. Nederlands Hierbij verklaa rt Lexmark Internation al, Inc. dat he t toestel dit p roduct in overeenstemming is met de essenti ...

  • Lexmark 032 - page 320

    Limited warranty service The warrant y perio d start s on the date o f orig inal purch ase as shown o n the purchase rec eipt and ends 1 2 months la ter provided that t he warranty period for any s upplies and for any maintenan ce items included with the printer s hall end earlier if it, or its original contents, are substantially used up, depleted ...

  • Lexmark 032 - page 321

    Limitation of liabili ty Your s ole remed y unde r th is li mite d warr anty i s se t fort h in t his do cume nt. Fo r any clai m co ncern ing perf ormanc e or nonperf ormanc e of Lexm ark or a Remarke ter fo r this pr oduct under t his li mited wa rran ty, you ma y recov er act ual damages up to the limit set fo rth in the fo llowing p aragraph. L ...

  • Lexmark 032 - page 322

    A PARTICULAR PURPOSE, AND ABS ENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM . TO THE EXTENT LEXMARK CANNOT BY LAW DIS CLAIM ANY COMPO NENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FI TNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRE SS SOFTWARE LIMITED WARRANTY. This Agr ...

  • Lexmark 032 - page 323

    c Reserva tion of R ight s . The Sof tware Prog ram, includ ing all f onts, is copyrigh ted an d owned b y Lexm ark Internation al, In c. and/or its supp liers. Lex mark res erves all ri ghts no t expressl y granted to you in th is Licens e Agreement. d Free ware . Notwiths tandin g the terms a nd con ditio ns of thi s License Agreement, all or any ...

  • Lexmark 032 - page 324

    16 EXPORT RESTRICTI ONS . You may not ( a) a cquire, ship, tr ansfer, or ree xport, d irectl y or i ndirect ly, the Softwa re Progra m or any dir ect pro duct therefr om, in v iolat ion of a ny appli cable ex port laws or (b) permit the So ftware Prog ram t o be used f or any purp ose pr ohibit ed by suc h exp ort l aws, incl udi ng, wit hout li mi ...

  • Lexmark 032 - page 325

    The use of th is product or ser vice is subject to th e reason able, non-di scrim inator y ter ms in the Intel lectual Prope rty Rights (IPR) Discl osure o f Cer ticom C orp. a t the I ETF fo r Add ition of the Camelli a Ciph er Suit es to Tran sport Layer Se curity (TLS) i mpleme nted in the pr oduct or s ervice. The us e of c erta in pate nts i n ...

  • Lexmark 032 - page 326

    Index Numerics 1565 Emulat ion error, loa d emulatio n option 268 200 pap er jam 254 201 pap er jam 255 203 pap er jam 256 230 pap er jam 257 231–239 pa per jams 257 24x p aper jam 258 250 pap er jam 261 280–289 pa per jam 261 290–292 pa per jams 262 30.xx Missin g [c olor ] cart ridg e and/or [ col or] i magin g unit 2 68 31.xx Mi ssing or D ...

  • Lexmark 032 - page 327

    cancel ing a prin t job from a com puter 1 04 from th e pr inter cont rol panel 10 3 canceling an e-mail 120 cannot open Em bedded Web Server 306 card st ock loading in multipur pose feeder 86 tips 101 Change [paper source] to [custom string] 264 Change [paper source] to [custom string] load [orientation] 264 Change [paper source] to [custom type n ...

  • Lexmark 032 - page 328

    document s, printi ng from Mac intos h 96 from Wi ndows 96 duplexi ng 108 E Eco ‑ Mode s etting 76 Edit Secu rity Setups menu 172 Embedd ed Web S erver accessi ng 30, 249 admini strato r settin gs 249 che ckin g prin ter st atus 249 checking s upplies 239 creating a fax des tination shortcu t 128 creat ing an FT P shor tcut 137 creating e ‑ m a ...

  • Lexmark 032 - page 329

    finding m ore infor mation about th e printer 17 finding prin ter IP ad dress 30 Finish ing menu 218 firmware card installi ng 39 flash drive printing from 97 Flash Dr ive m enu 21 0 flash drives support ed file types 98 flash memo ry card installi ng 39 troubl eshoot ing 290 font sa mple list printin g 102 Forms a nd Favo rites setti ng up 32 forw ...

  • Lexmark 032 - page 330

    loading the st andard t ray 82 loading transpa rencies in multi purpose f eeder 86 M maki ng cop ies us ing pape r from selecte d tray 107 max speed using 103 max yield using 103 memory type s inst alled o n pri nter 230 memory card installi ng 37 troubl eshoot ing 291 menu s etting s page printin g 61 menus Active NIC 160 AppleTalk 165 Confidentia ...

  • Lexmark 032 - page 331

    paper size setti ng 8 1 Paper Siz e/Type menu 1 50 paper size s support ed 93 paper typ e setti ng 8 1 paper types duplex support 9 5 support ed by pri nter 95 where to load 95 Paper We ight menu 153 Parallel [x] menu 167 PCL Emul me nu 224 PDF men u 223 photos copying 106 placi ng sepa rato r shee ts betw een copies 110 port se ttings configur ing ...

  • Lexmark 032 - page 332

    80.xx Fu ser missin g 274 80.xx Fuser near lif e warning 273 80.xx Replac e fuser 274 82.xx Replace waste toner bottle 274 82.xx Wa ste toner bott le nearl y full 274 83.xx Replace t ransfer module 274 83.xx Trans fer modul e life warning 274 83.xx Tra nsfer modu le missing 274 84 Defect ive [col or] im aging unit 27 5 84 uns upported [c olor ] ima ...

  • Lexmark 032 - page 333

    replacing the waste toner bottle 246 reports viewing 250 Reports menu 158 reserve prin t jobs 101 pri nting from a Mac intos h comput er 102 prin ting fr om Wind ows 102 resolution , fax changin g 131 Restore held jobs? 26 7 rest oring f actor y def ault settin gs 251 S safety information 15, 16 saving paper 111 Scan Center features 143 scan screen ...

  • Lexmark 032 - page 334

    syst em board access ing 36 syst em board co ver reatta ching 36 T TCP/IP menu 162 teleco mmun ication notices 313, 314 , 315, 316 tips card stock 101 labels, pape r 100 on using envel opes 10 0 on using letterhead 99 on using transparencies 99 tips on using e nvelopes 100 tips on using le tterhead 99 toner c artridge repla cing 244 toner c artridg ...

  • Lexmark 032 - page 335

    U underst anding the h ome sc reen button s and icons 25 uneven pr int densi ty 303 Universal Paper Size setti ng 8 1 Universal S etup menu 1 58 unlinking trays 88 Unsuppor ted USB d evice, pl ease remove 265 updating opt ions in printe r driver 62 USB port 60 USB/paral lel interfa ce card troubl eshoot ing 291 using Ec o ‑ Mode 76 using Hib erna ...

Manufacturer Lexmark Category Printer

Documents that we receive from a manufacturer of a Lexmark 032 can be divided into several groups. They are, among others:
- Lexmark technical drawings
- 032 manuals
- Lexmark product data sheets
- information booklets
- or energy labels Lexmark 032
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lexmark 032.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lexmark 032, service manual, brief instructions and user manuals Lexmark 032. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lexmark 032.

Similar manuals

A complete manual for the device Lexmark 032, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lexmark 032 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lexmark 032.

A complete Lexmark manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lexmark 032 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lexmark 032, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lexmark 032, that we can find in the current document
3. Tips how to use the basic functions of the device Lexmark 032 - which should help us in our first steps of using Lexmark 032
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lexmark 032
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lexmark 032 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lexmark 032?

Use the form below

If you did not solve your problem by using a manual Lexmark 032, ask a question using the form below. If a user had a similar problem with Lexmark 032 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)