English dropdown-ico

Manual Knoll Systems HD282

34 pages 1.01 mb
Download

Go to site of 34

Summary
  • Knoll Systems HD282 - page 1

    HD282 HDTV DLP Projector Users Manual v1.1 ...

  • Knoll Systems HD282 - page 2

    2 FCC Warning This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no ...

  • Knoll Systems HD282 - page 3

    3 TABLE OF CONTENTS Safety Warnings 2 Safety Instructions 4 Introduction/Usage guidelines 5 Setting up and positioning the projector 6 Projection distances 7 Video device connections 8 Displaying a video image 10 Connecting a computer 11 Shutting down the projector 12 Troubleshooting your setup 12 Using the keypad buttons 15 Using the remote contro ...

  • Knoll Systems HD282 - page 4

    4 SAFETY INSTRUCTIONS Please read and follow all safety i nstructions provided BEFORE usi ng your new projector. Failure to comply with safety instructions may result in fire, el ectrical shock, or personal injury and m ay dam age or impair prot ection provided by equi pment. Please save all safety instructions. Safety Definitions: Warning: Stateme ...

  • Knoll Systems HD282 - page 5

    5 INTRODUCTION The Knöll HD282 Introduction Congratulations and thank you for your choice of a superior digital image projection device. Your new Knöll HD282 is specifically designed for home cinema applications. The HD282 sets new standards for high-definition digital perfection, featuring true High Definition 1280x720 resolution using the lates ...

  • Knoll Systems HD282 - page 6

    6 SETTING UP THE PROJECTOR There are a number of factors to consider w hen determining where to set up the projector, including the size and shape of your screen, the lo cation of your power outlets, and the distance between the projector and the rest of your equipment. But here are some general guidelines. NOTE: To ensure adequate cable a ccess, d ...

  • Knoll Systems HD282 - page 7

    7 HD282 Projection Distances 16:9 Image Screen Diagonal 92” 103” 106” 110” 122.5” 146.75” 165.25” Min. Distance 133.3” 149.6” 153.3” 160” 178.33” 213.33” 214” Max. Distance 166.6” 187” 191.6” 200” 222.9” 266.6 299” Screen Offset 7.3” 8.2” 8.4” 8.8” 9.8” 11.7” 15” Note: Maximum distance to screen ...

  • Knoll Systems HD282 - page 8

    8 Video Connections 1. Place the projector on a flat surface or using a ceiling mount kit, on the ceiling. If you want to project from behind a rear projection screen, set up the projector behind your screen. 2. Position the projector the desired distance from the screen. The distance from the lens of the projector to the screen and the zoom settin ...

  • Knoll Systems HD282 - page 9

    9 Connecting a Video Device If your video device has more than one output, select the highest quality one. DVI video has the best quality , followed by Component video, S-video, and then composite video. If the video device uses component cable connectors, plug the cable’s green con- nectors into the green component-out connector on the video dev ...

  • Knoll Systems HD282 - page 10

    10 If the video device uses a VESA connector, plug a VESA cable into the video-out connector on the video device. Plug the other connector into the VESA connector on the projector. Connecting the power cable Connect the power cable to the connector on the back of the projector and to y our electrical outlet. The Power LED on the key pad turns solid ...

  • Knoll Systems HD282 - page 11

    11 If the image is not square, adjus t the keystone using the buttons on the keypad. Press the upper Ke ystone button to reduce the width of the upper portion of the image, and press the low er Key stone button to reduce the width of the low er portion. The Contrast , Brightness , Color , and Tint are factory calibrated to D65 colors, but y ou can ...

  • Knoll Systems HD282 - page 12

    12 Shutting down the projector Power Save The projector has a Power Save feature in the System menu that automatically turns the lamp off after no signals are detected for 20 minutes. After 10 additional mi nutes with no signal, the projector pow ers dow n. If an active signal is received before the projector power s dow n, the image is displa y ed ...

  • Knoll Systems HD282 - page 13

    13 The following table show s some potential problems. In some cases, more than one possible solution is provided. Try the solutions in the order they are presented. When the problem is solved, you can skip the additional solutions. ...

  • Knoll Systems HD282 - page 14

    14 ...

  • Knoll Systems HD282 - page 15

    15 Using the projector keypad buttons Most buttons are described in detail in other sections, but here is an overvi ew of their functions: Pow er– turns the projector on and off. Menu– opens the on-screen menus. Select– confirms choices made in the menus. Up/down arrow s– navigates to and adjusts settings in the menus. A uto image– resets ...

  • Knoll Systems HD282 - page 16

    16 Using the remote control The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the batteri es, sliding them into pl ace, and then replacing the cover. To operate, point the remote at the projection screen or at the proj ector (not at the video device o ...

  • Knoll Systems HD282 - page 17

    17 Optimizing video images After the video device is connect ed properly and the image is on the screen, you can opt imize the image using the onscreen menus. Change the Aspect ratio. Aspect ratio is the ratio of the image w idth to image height. TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are 1.78:1, or 16:9. C hoose the o ...

  • Knoll Systems HD282 - page 18

    18 The menus are grouped by usage: The Picture menu provi des image adjustments. The Settings menu provides set-up type adjustments that ar e not changed often. The About menu provides a read- only display of information about the projector and source. Certain menu items may be hidden until a particular source is connected. For example, Tint is onl ...

  • Knoll Systems HD282 - page 19

    19 Native : this mode bypasses the internal scaler, displaying the image with no resizing. Since the native resolution is 1280x720 and 4x3 video images are approximately 640x480, 4x3 images will always be smaller than the display and will be centered in the display. Computer images 1024x768 or smaller will also be centered in the display. If a 16x9 ...

  • Knoll Systems HD282 - page 20

    20 Natural Wide : this mode stretches a 4:3 image to fill the entire 16:9 screen. The center two-thirds of the image is unchanged; the edges of the image are stretched. Presets : This allows you to customize settings and save the settings to be restored later. To restore the factory default settings, choose Factory Reset in the Settings>Service ...

  • Knoll Systems HD282 - page 21

    21 Advanced settings TrueLife : This option refers to Faroudja’s TrueLife processing of the image. All standard definition interlaced vi deo signals (composite, S-video and component) are routed through this processor. Extended and High Definition progressive component sources are not routed though this processor by default. You can turn TrueLife ...

  • Knoll Systems HD282 - page 22

    22 Color Control : allows you to individually adjust the gain (relative warmth of the color) and the offset (the amount of black in the color) of the r ed, green, and blue colors. Gamma : Gamma tables contain preset intensity configurations optimized for the input source. You can select a gamma table that has been specifically tuned fo r either fil ...

  • Knoll Systems HD282 - page 23

    23 The Source Enable feature is used to eliminate certain sources from this search, which will speed the search. By default, the check boxes for all sources are checked. Uncheck a source’s box to eliminate it from the search. System All options in this menu toggle between on and off. Rear: reverses the image so you can project from behind a trans ...

  • Knoll Systems HD282 - page 24

    24 Blank Screen : determines what color displays w hen you press the Blank button on the remote or when no source is active. Language : allow s you to select a language for the onscreen display of menus and messages. Service Menu Use these features, hi ghlight them and press Select . Factory Reset : restores all settings (except Lamp Hours, Ce ilin ...

  • Knoll Systems HD282 - page 25

    25 Replacing the projection lamp The lamp hour timer in the A bout menu counts the number of hours t he lamp has been in use. After 1980 hours, the message “Change lamp” briefly appears on the scr een at each startup. To maintain optimal video performance, we recommend changing the lamp a fter 2000 hours, depending on usage. You can order new l ...

  • Knoll Systems HD282 - page 26

    26 7. Tighten the single screw. 8. Replace the lamp door by sliding the tabs into the tab bay s and tightening the two screw s. 9. Plug in the power cable, then press the Power button to turn the projector back on. 10. Reset the lamp hour timer. Resetting the lamp timer To reset the lamp age, simultaneously holding down the tw o Brightne ss buttons ...

  • Knoll Systems HD282 - page 27

    27 Red LED behavior and projector errors If the projector is not functioning pr operly and the red LED is blinking, c onsult the table below to determine a possible cause. There are two-second pauses betw een the blinking cycles. ...

  • Knoll Systems HD282 - page 28

    28 ...

  • Knoll Systems HD282 - page 29

    29 ...

  • Knoll Systems HD282 - page 30

    30 RS232 Terminal Specifications and Commands To control the projector from an LCD control panel, connect an R S-232 cable to the serial control connec8tor on the projector and set your com puter’s serial port set tings to ma tch this com municat ion configuration: Command format All comm ands consist of 3 alpha charact ers followed by a request, ...

  • Knoll Systems HD282 - page 31

    31 Supported commands Function Command Range Default Aspect Ratio ARZ 0-4 1 0 = N a t i v e 1 = 1 6 : 9 2 = 4 : 3 3 = L e t t e r b o x 4 = N a t u r a l W i d e Auto Chime Enable ACE 0-1 1 Auto Power APO 0-1 0 Auto Source ASC 0-1 0 Blank BLK 0-1 0 Blank Screen BSC 0-2 0 0 = b l a c k 1 = b l u e 2 = w h i t e Blue Color Offset BCO 1-63 32 Blue Gai ...

  • Knoll Systems HD282 - page 32

    32 Green Gain GCG 1-63 32 High Power Enable HPE 0-1 0 Horizontal Position HPS n/a n/a Keystone (Vertical) DKC 53-203 128 Keystone (Horizontal) DKH 63-193 128 Lamp Hours (Read only) LMP 0-32767 0 Lamp Reset LMR 0-32767 0 Luma Detail LDE 0-20 0 Menu MNU 0-1 0 Menu Navigation NAV 0-4 n/a 0 = u p 1 = d o w n 4 = s e l e c t Language LAN 0-11 0 0 = E n ...

  • Knoll Systems HD282 - page 33

    33 Red Gain RCG 1-63 32 Skintone Bypass Enable SBE 0-1 0 Source SRC 0-7 2 0 = Video 1, MI 1 = Video 2, VESA 2 = Video 3, Component 1 3 = Video 4, S-Video 1 4 = Video 5, S-Video 2 5 = Video 6, Component 2 6 = Video 7, Composite 7 = Video 8, D5 Startup Logo DSU 0-1 1 Tint TNT 2-254 128 Tracking MTS n/a n/a Translucent OSD TOE 0-1 1 TrueLife Enable TL ...

  • Knoll Systems HD282 - page 34

    34 LIMITED WARRANTY Knöll Systems, Inc. (“Knöll”) w arrants that each HD282 (“the Product”) sold hereunder w ill conform to and function in accordance with the w ritt en specifications of Knöll. Said limited warranty shall apply only to the first person or entity that purchas es the Product for personal or busi ness use and not for the p ...

Manufacturer Knoll Systems Category Projection Television

Documents that we receive from a manufacturer of a Knoll Systems HD282 can be divided into several groups. They are, among others:
- Knoll Systems technical drawings
- HD282 manuals
- Knoll Systems product data sheets
- information booklets
- or energy labels Knoll Systems HD282
All of them are important, but the most important information from the point of view of use of the device are in the user manual Knoll Systems HD282.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Knoll Systems HD282, service manual, brief instructions and user manuals Knoll Systems HD282. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Knoll Systems HD282.

Similar manuals

A complete manual for the device Knoll Systems HD282, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Knoll Systems HD282 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Knoll Systems HD282.

A complete Knoll Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Knoll Systems HD282 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Knoll Systems HD282, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Knoll Systems HD282, that we can find in the current document
3. Tips how to use the basic functions of the device Knoll Systems HD282 - which should help us in our first steps of using Knoll Systems HD282
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Knoll Systems HD282
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Knoll Systems HD282 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Knoll Systems HD282?

Use the form below

If you did not solve your problem by using a manual Knoll Systems HD282, ask a question using the form below. If a user had a similar problem with Knoll Systems HD282 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)