Manual Emerson CETD204

104 pages 2.63 mb
Download

Go to site of 104

Summary
  • Emerson CETD204 - page 1

    COLOR TV/VCR/D VD TRIPLE COMBO CETD204 (20 inc h) O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional oper ating assistance after reading this owner’ s manual or to order repla ...

  • Emerson CETD204 - page 2

    1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera ...

  • Emerson CETD204 - page 3

    - 3 - EN 1B15 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to pr ...

  • Emerson CETD204 - page 4

    - 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fr ...

  • Emerson CETD204 - page 5

    - 5 - EN 1C29 AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • A void dusty or humid places. • A void places with ...

  • Emerson CETD204 - page 6

    - 6 - EN 1C29 T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 W ARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C T ABLE OF CO ...

  • Emerson CETD204 - page 7

    - 7 - EN 1C29 • Hi-Fi system – The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz and 0.005% wow and flutter . • Rotary 4-head Record/Pla yback System– Four heads ensure excellent picture quality and special effects playback. • Index Sear ch– Fast-forw ...

  • Emerson CETD204 - page 8

    - 8 - EN 1C29 ¡ Dolby Digital sound This TV/VCR/DVD can handle Dolby Digital sur- round sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback V arious playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡ Random playbac k for audio CD and MP3 T ...

  • Emerson CETD204 - page 9

    - 9 - EN 1C29 OPERA TING CONTROLS AND FUNCTIONS 5. ST OP Button [TV/VCR P .26 / DVD P .37] Stops operation of the disc. (or front panel) Stops operation of the disc or tape contents. (remote control) 6. OPEN/CLOSE Button [DVD P .37] Press to insert discs into or remove them from the tray . 7. Disc loading tray 8. D VD Indicator Lights up during DVD ...

  • Emerson CETD204 - page 10

    46 48 47 ANT. AUDIO OUT COAXIAL - 10 - EN 1C29 20. A UDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV/VCR Mode: [P .15] Press two digits to directly access the desired channel. Remember to press a “0” before a single di ...

  • Emerson CETD204 - page 11

    - 11 - EN 1C29 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scram- bled channels. However , channel selection must be made with the converter bo ...

  • Emerson CETD204 - page 12

    - 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/VCR/DVD channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the r ...

  • Emerson CETD204 - page 13

    - 13 - EN 1C29 CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGI- TA L INPUT JACKS SUCH AS MD DECK OR DA T DECK (for DVD) Use an audio coaxial digital cable available at retail for the audio connections. NOTES: • The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DA T deck. ...

  • Emerson CETD204 - page 14

    - 14 - EN 1C29 F ront speaker (left) Center speaker F ront speaker (right) Surround speaker (left) Surround speaker (right) Subwoof er To DIGIT AL A UDIO OUT (PCM/BITSTREAM) COAXIAL jac k To COAXIAL DIGIT AL A UDIO INPUT jac k Dolby Digital decoder ANT. AUDIO OUT COAXIAL [Fig. 7] CONNECTING TO A DOLBY DIGIT AL DECODER (for DVD) If using this TV/VCR ...

  • Emerson CETD204 - page 15

    1 Plug in the TV/VCR/D VD power cor d Plug the TV/VCR/DVD power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, press the POWER button without unplug- ging the power cord. Make sure ... • Press the SELECT button to select TV/ VCR mode or make sure TV/ VCR lights on. • Press the POWER button to turn on ...

  • Emerson CETD204 - page 16

    - 16 - EN 1C29 5 Select the year Press the Arrow button K or L until your desired year appears. (Example: 2004) Then press the Arrow button B . 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B . 7 Select the minute Press the Arrow button K or L until the desired minute a ...

  • Emerson CETD204 - page 17

    - 17 - EN 1C29 DA YLIGHT -SA VING TIME Select this feature and the TV/VCR/DVD’ s clock automatically will advance one hour in April, then reverse one hour in October . When Daylight-Saving T ime is ON, the clock will change automatically as follows: • First Sunda y of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programmin ...

  • Emerson CETD204 - page 18

    - 18 - EN 1C29 CHANNEL SET UP Make sure ... • Press the POWER button to turn on the TV/VCR/DVD. 1 Select “CHANNEL SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “CHANNEL SET UP”. Then press the ENTER button. 2 Begin auto ch pr ogramming Press the Arrow button K or L to point to “AUTO CH P ...

  • Emerson CETD204 - page 19

    - 19 - EN 1C29 TV OPERA TION DEGAUSSING Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so. TV/VCR WA TCHING A TV PROGRAM 1 T urn on the TV/VCR/D V ...

  • Emerson CETD204 - page 20

    - 20 - EN 1C29 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, y ...

  • Emerson CETD204 - page 21

    - 21 - EN 1C29 5 Exit the V -Chip setting mode Press the SETUP button on the remote control to exit the screen. V -CHIP SET UP Make sure ... • TV/VCR/DVD is turned on. 1 Select “V -CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V -CHIP SET UP”. Then press the ENTER button. 2 Enter Acces ...

  • Emerson CETD204 - page 22

    - 22 - EN 1C29 CHANGING V -CHIP BLOCKED PRO- GRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] to [2]. 2)Press the Arrow button K or L to select “TV RA T- ING”. Then press the EN ...

  • Emerson CETD204 - page 23

    - 23 - EN 1C29 MTS(Multi-Channel T elevision sound)SYSTEM Y ou can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the TV/VCR/DVD tuner channel you are watching, the status shown below will appear when you press the DISPLA Y button on the remote control. PLA Y B 12:00AM ...

  • Emerson CETD204 - page 24

    - 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/VCR/DVD power must be turned on. TO SELECT HIFI MODE 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2 Select “VCR A UDIO” Press the Arrow button K or L to point ...

  • Emerson CETD204 - page 25

    - 25 - EN 1C29 VIDEO CASSETTE This TV/VCR/DVD will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the STOP/EJECT button on the TV/VCR/DVD. The cassette will eject. 2)Pull the cassette out of the cassett ...

  • Emerson CETD204 - page 26

    - 26 - EN 1C29 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/VCR/DVD power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR/DVD will start playback automatically . 2 To begin playbac k Press the PLA Y button. 3 To stop playbac k Press the STOP button when play- back is completed. NOTES: • I ...

  • Emerson CETD204 - page 27

    - 27 - EN 1C29 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2 Set “RENT AL ” to [ON] Press ...

  • Emerson CETD204 - page 28

    - 28 - EN 1C29 SEARCH Make sure ... • TV/VCR/DVD power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward t ...

  • Emerson CETD204 - page 29

    - 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the RECORD button is pressed. It will also be marked at the starting point of T imer recording and OTR. • The index mark will not ...

  • Emerson CETD204 - page 30

    - 30 - EN 1C29 RECORDING Make sure ... • TV/VCR/DVD power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This TV/VCR/DVD will ONL Y record and view the same channel. • This TV/VCR/DVD cannot recor ...

  • Emerson CETD204 - page 31

    Y ou can make copies of video tapes made by friends or relatives for your enjoyment. Y ou can not copy a DVD to a videotape. Connect your TV/VCR/DVD and a Source (Playing) VCR using the following diagram. 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder . 2)Insert a blank video cassette or one you want to record ove ...

  • Emerson CETD204 - page 32

    - 32 - EN 1C29 TIMER Y ou may set the TV/VCR/DVD to start and end a recording while you are away . Y ou can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to r ecord: DA TE: July 4th, 2004 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure . ...

  • Emerson CETD204 - page 33

    - 33 - EN 1C29 To shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 32. 3)Press the RECORD button and select the desired program using the Arrow button K or L . 4)Press the RECORD button again. Each additional push will shift forward the begin/end time for recording by 10 minutes. When the ...

  • Emerson CETD204 - page 34

    - 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the Recording indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. HI ...

  • Emerson CETD204 - page 35

    - 35 - EN 1C29 ON SCREEN DISPLA Y To check the Counter , Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains. T ...

  • Emerson CETD204 - page 36

    – 36 – EN 01A1 1 D VD SECTION ABOUT THE DISCS DISC TYPES The following discs can be played back on this TV/VCR/DVD. ¡ D VD video ¡ D VD-R/R W* ¡ D VD+R/R W* ¡ A udio CD ¡ CD-R/R W* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/R W , DVD+R/R W or CD-R/R W discs made on pers ...

  • Emerson CETD204 - page 37

    – 37 – EN 01A1 1 PLA YING A DISC BASIC PLA YBACK Getting started ¡ T urn on the power of amplifier and any other com- ponents, if necessary . 1 Press the PO WER button. ¡ The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray . 3 Place the chosen disc in the tra y , with the label facing up. MP3 CD DVD-V 4 Press the P ...

  • Emerson CETD204 - page 38

    – 38 – EN 01A1 1 STEP BY STEP PLA YBACK 1 During playbac k, press the P A USE button. ¡ Playback will pause and sound will be muted. 2 The disc goes forwar d b y one frame each time the P A USE button is pressed. 3 To e xit step by step pla yback, press the PLA Y button. DVD-V RESUME 1 During playbac k, press the STOP b utton. ¡ Resume messag ...

  • Emerson CETD204 - page 39

    – 39 – EN 01A1 1 SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an Audio CD and MP3 at a specific track. Using the Number buttons on the remote control 1 Press the Number buttons to enter the desired T rack number . ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg. ...

  • Emerson CETD204 - page 40

    – 40 – EN 01A1 1 SPECIAL PLA YBACK FUNCTION REPEA T REPEA T TITLE / CHAPTER To activate the repeat function, press the REPEA T button during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( current title repeat ...

  • Emerson CETD204 - page 41

    – 41 – EN 01A1 1 PLA YING A MP3 DISC When a CD with MP3 files is in the TV/VCR/DVD, press the DISC MENU button to call up the MP3 menu on the TV screen. 1 In stop mode, press the Arro w button ( K / L ) to select the desired group or trac k. ¡ If a group is selected, press the Arrow button B or the ENTER button to go on to the track selection ...

  • Emerson CETD204 - page 42

    – 42 – EN 01A1 1 CHANGING THE SETTINGS AUDIO LANGUAGE The TV/VCR/DVD allows you to select a language during DVD disc (if multi languages are available) playback. 1 Press the A UDIO button during playbac k. 2 Press the A UDIO button repeatedly to select y our desired langua ge. NOTE ¡ If your language is not shown after pressing AUDIO several t ...

  • Emerson CETD204 - page 43

    – 43 – EN 01A1 1 For DVD-Vs 1 Press the DISPLA Y button during playbac k to show current Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Press the DISPLA Y button again to show current Title. ¡ The elapsed and remaining playing time of the cur- rent title will be displayed. 3 Press the DISPLA Y b ...

  • Emerson CETD204 - page 44

    – 44 – EN 01A1 1 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING Language options are not available with some discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appears. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice. 2 Press the Arro w button L to select CUS- T O ...

  • Emerson CETD204 - page 45

    – 45 – EN 01A1 1 AUDIO SETTINGS Choose the appropriate Audio settings for your equip- ment as it only affects during the playback of DVD discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appear s. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice. 2 Press the Arro ...

  • Emerson CETD204 - page 46

    – 46 – EN 01A1 1 – 46 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back. ¡ Level 1 Only DVD software intended for children can be played back, with those intende ...

  • Emerson CETD204 - page 47

    – 47 – EN 01A1 1 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture and sound • Make sure the AC cord is connected to a ...

  • Emerson CETD204 - page 48

    – 48 – EN 01A1 1 CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/VCR/DVD is showing • Y ou are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected. • A prerecorded program will not show any misspelled words because • of the normal time a ...

  • Emerson CETD204 - page 49

    – 49 – EN 01A1 1 NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback. PROBLEM CORRECTIVE ACTION No picture • Insert a corre ...

  • Emerson CETD204 - page 50

    – 50 – EN 01A1 1 EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR/DVD. Such chemi- cals may cause damage and discoloration to the exposed surfaces. A ...

  • Emerson CETD204 - page 51

    – 51 – EN 01A1 1 CR T 20 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 CA TV VHF : 5A MID ba ...

  • Emerson CETD204 - page 52

    Printed in China 1EMN20067 T1010CL ★★★★★ EMERSON HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a EMERSON Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards. We feel confident that in normal use, it will provide you with ...

  • Emerson CETD204 - page 53

    ENSEMBLE TÉLÉVISEUR/MA GNÉT OSCOPE/LECTEUR D VD CETD204 (20 pouces) GUIDE D’UTILISA TION En tant que par tenaire de ENERGY ST AR notre société a conclu que ce produit répond aux normes d'économie énergétique de ENERGY ST AR. ENERGY ST AR est une marque déposée aux États Unis. ® ® ® ACCESSOIRES INCLUS A VEC L ’APP AREIL Piles ...

  • Emerson CETD204 - page 54

    1.Lisez les instructions- V euillez lire toutes les instructions relatives à la sécurité et au fonctionnement avant d’utiliser l’appareil. 2.Conservez les instructions- Les instructions sur la sécurité et le fonctionnement doivent être conservées pour consultation ultérieure. 3.Respectez les avertissements -V euillez respecter les avert ...

  • Emerson CETD204 - page 55

    - 3 - FR 1B15 13.Mise à la terr e de l’antenne extérieure- Si une antenne extérieure ou un réseau câblé est connecté sur l’appareil, vérifiez si l’antenne ou le réseau câblé est mis à la terre afin de protéger contre les poussées momentanées de tension et l'accumulation de charges électrostatiques. L ’article 810 du Cod ...

  • Emerson CETD204 - page 56

    - 4 - FR 1B15 INTERFÉRENCES TÉLÉ-RADIO Cet apapreil a été essayé et déclaré conforme aux prescriptions sur les dispositifs numériques de Classe B, conformément à la Partie 15 du règlement de la FCC. Ces prescriptions ont pour but de protéger correctement les installations domestiques contre les interférences dangereuses. Cet appareil ...

  • Emerson CETD204 - page 57

    - 5 - FR 1C29 POUR ÉVITER LES RISQUES D’ÉLECTROCUTION ET D’INCENDIE EMPLACEMENT Pour que votre appareil fonctionne de façon satisfaisante et sûre, rappelez-vous ce qui suit lorsque vous choisissez où l’installer: • Protégez-le de la lumière solaire directe et éloignez-le des sources de chaleur intense. • Evitez les endroits poussi ...

  • Emerson CETD204 - page 58

    - 6 - FR 1C29 TA BLE DES MA TIÈRES C MESURES DE SÉCURITÉ IMPORT ANTES . . . . . . . . . . . . . . . . .2 C PRÉCAUTIONS . . . . . . . . . . . . . . . .4 EMPLACEMENT . . . . . . . . . . . . . . .5 POUR ÉVITER LES RISQUES D’ÉLECTROCUTION ET D’INCENDIE . . . . . . . . . . . . . . . . . . .5 A VER TISSEMENT . . . . . . . . . . . . . . . .5 SYM ...

  • Emerson CETD204 - page 59

    - 7 - FR 1C29 • Système Hi-Fi – Le système d’enregistrement Hi-Fi stéréo offre une excellente qualité sonore avec une etendue dynamique de 80dB, une fréquence de réponse de 20Hz à 20kHz et une fluctuation de 0,005%. • Système rotatif d’enregistrement/de lecture à quatre têtes– Quatre têtes assurent une lecture offrant une im ...

  • Emerson CETD204 - page 60

    - 8 - FR 1C29 ¡ Dolby Digital Ce lecteur supporte le Dolby Digital ayant 5.1 canaux lorsqu’il est branché sur un décodeur Dolby Digital. ¡ Lecture fixe/rapide/ralenti/pas à pas Plusieurs modes de lecture sont disponibles y compris images fixes, avant/arrière rapide, ralenti et pas à pas. ¡ Lecture aléatoire des A udio CD et MP3 Ce lecteu ...

  • Emerson CETD204 - page 61

    - 9 - FR 1C29 6. T ouche OPEN/CLOSE (OUVRIR/FERMER) [DVD P .37] Appuyez pour insérer les disques sur le plateau ou les retirer . 7. Plateau 8. Indicateur D VD V oyant allumé lors du mode DVD. 9. T ouche SELECT (SÉLECTION) Appuyez pour passer au mode TV/VCR, au mode entrée extérieure ou au mode DVD. 10. Indicateur TV/VCR V oyant allumé lors du ...

  • Emerson CETD204 - page 62

    - 10 - FR 1C29 46 48 47 ANT. AUDIO OUT COAXIAL 20. Prises d’entrée A UDIO L/R (SON G/D) Pour brancher aux prises de sortie de son d’une caméra vidéo ou d’un magnétoscope. 21. Logement de la vidéocassette 22. T ouche PICTURE (IMA GE) Appuyez pour régler l’image. 23. T ouches numériques Mode TV/VCR: [P .15] T apez deux chiffres pour ac ...

  • Emerson CETD204 - page 63

    - 11 - FR 1C29 CÂBLE A VEC CONVERTISSEUR/ DÉBROUILLEUR DES CANAUX ET RECEPTEUR D’ANTENNE P ARABOLIQUE Si votre câblo-diffuseur vous fournit un convertisseur ou si vous utilisez un système par satellite, vous pouvez utiliser la connexion de base montrée dans l’illustration. En utilisant cette connexion vous pouvez aussi enregistrer les cha? ...

  • Emerson CETD204 - page 64

    - 12 - FR 1C29 POUR ENREGISTRER UNE CHAÎNE BROUILLÉE/DÉSEMBROUILLÉE 1. Configurez le sélecteur de chaînes l’appareil sur la chaîne de sortie du convertisseur du réseau câblé ou sur le boîtier satellite. (Exemple. CH3) 2.Sélectionnez la chaîne que vous voulez enregistrer à partir du convertisseur du réseau câblé ou du boîtier sat ...

  • Emerson CETD204 - page 65

    - 13 - FR 1C29 CONNEXION SUR UN AMPLIFICA TEUR STÉRÉO ÉQUIPÉ DE PRISES D’ENTRÉE NUMÉRIQUES, LECTEUR MD ET PLA TINE À CASSETTE DA T (uniquement pour le DVD). Utilisez les câbles son numériques coaxiaux en vente dans le commerce pour les connexions son. REMARQUES: • La source son d’un disque en format Dolby Digital chaîne 5.1 ne peut ...

  • Emerson CETD204 - page 66

    - 14 - FR 1C29 Haut-parleur avant (gauche) Haut-parleur central Haut-parleur avant (droit) Haut-parleur quadriphonique (gauche) Haut-parleur quadriphonique (droit) Haut-parleur d'extrême grave Sur la prise DE SORTIE AUDIO (SON) NUMÉRIQUE COAXIAL (COAXIAL) (PCM/BITSTREAM) Sur la prise D’ENTRÉE AUDIO (SON) NUM ÉRIQUE COAXIAL (COAXIAL) Déc ...

  • Emerson CETD204 - page 67

    - 15 - FR 1C29 PROGRAMMA TION DE L ’APP AREIL SECTION TV/VCR 1 Branchement du cor don d’alimentation du l’appareil Branchez le cordon d’alimentation du l’appareil sur une prise de courant alternatif conventionnelle. REMARQUE : • Si des chiffres apparaissent dans le coin de l’écran, appuyez sur la touche POWER sans brancher le cordon ...

  • Emerson CETD204 - page 68

    - 16 - FR 1C29 4 Sélectionner le jour . Appuyer sur la touche directionnelle K ou L jusqu'à ce que le jour souhaité apparaisse. (Exemple: 6 → 06). Puis, appuyer sur la touche directionnelle B . 5 Sélectionner l'année. Appuyer sur la touche directionnelle K ou L jusqu'à ce que l'année souhaitée apparaisse. (Exemple: 200 ...

  • Emerson CETD204 - page 69

    - 17 - FR 1C29 3 Commencer “RECH. AUT O HORLOGE CH. ” Appuyer sur la touche directionnelle L pour sélectionner “RECH. AUTO HORLOGE CH.”. Appuyer sur la touche ENTER. • L ’appareil recherche maintenant la station contenant le signal de réglage d'horloge automatique. La recherche du signal peut demander jusqu'à 20 secondes pa ...

  • Emerson CETD204 - page 70

    - 18 - FR 1C29 A ce stade-ci, nous vous recommandons de programmer tous les canaux que vous êtes en mesure de capter dans votre région. REMARQUE: La programmation du syntonisateur de cet appareil n’est pas nécessaire lorsque vous utilisez un convertisseur/décodeur du câble ou de l’antenne parabolique. Il vous suffit de syntoniser , à part ...

  • Emerson CETD204 - page 71

    - 19 - FR 1C29 Canaux ajoutés: Bleu clair Canaux supprimés: Roug e clair 4 Effacement (ou ajout) de la mémoire Appuyez sur la touche ENTER afin d’effacer (ou ajouter) le canal sélectionné. V ous verrez le numéro du canal effacé passer au rouge à l’écran. Cela confirme son effacement de la mémoire. • Si vous désirez effacer d’autr ...

  • Emerson CETD204 - page 72

    - 20 - FR 1C29 3 Ajustement des aspects de l’image Ajustez chaque aspect de l’image en utilisant les touches directionnelle s ou B . sB LUMINOSITÉ diminue augmente CONTRASTE diminue augmente COULEUR diminue augmente TEINTE plus rouge plus vive NETTETÉ plus floue plus claire • Si une interruption de l’alimentation électrique de l’appare ...

  • Emerson CETD204 - page 73

    - 21 - FR 1C29 5 Quittez le mode de réglage de la circuit V Appuyez sur la touche SETUP de la télécommande pour quitter l’écran RÉGLAGE CIRCUIT V Vérifiez que ... • L ’appareil soit allumé. 1 Sélectionnez “RÉGLA GE CIRCUIT V” Appuyez sur la touche SETUP de la télécommande. Appuyez sur la touche directionnelle K ou L pour pointe ...

  • Emerson CETD204 - page 74

    - 22 - FR 1C29 CHANGEMENT DE LA PROGRAMMA TION BARRÉE DU CIRCUIT V REMARQUE : Pour changer la cote, la télé doit afficher une station qui n’est pas protégée. Si (PROTÉGÉE) s’affiche à l’écran, veuillez changer la chaîne pour une station qui n’est pas protégée. 1) Suivez les étapes [1] à [2]. 2) Appuyez sur la touche directionn ...

  • Emerson CETD204 - page 75

    - 23 - FR 1C29 SYSTÈME MTS (Système multivoies) V ous pouvez enregistrer ou écouter un programme en stéréo MTS VÉRIFICA TION DU MODE MTS SÉLECTIONNÉ Quand vous faites jouer une vidéocassette VHS ou recevez une émission sur le récepteur de l’appareil, l’état présenté ci-dessous s’affiche quand vous appuyez sur la touche DISPLA Y ...

  • Emerson CETD204 - page 76

    - 24 - FR 1C29 SÉLECTION DU SYSTÈME MTS Vérifiez que ... • L'appareil est sous tension. POUR SÉLECTIONNER LE MODE HIFI 1 Sélectionnez “RÉGLA GES DE L ’USA GER” Appuyez sur la touche SETUP de la télécommande. Appuyez sur la touche directionnelle K ou L pour pointer sur “RÉGLAGES DE L ’USAGER”. Appuyez ensuite sur la touch ...

  • Emerson CETD204 - page 77

    - 25 - FR 1C29 VIDÉOCASSETTE Cet appareil fonctionne avec toute vidéocassette qui possède la marque . Pour obtenir les meilleurs résultats, nous recommandons d’utiliser des bandes de qualité supérieure. N’utilisez pas des bandes endommagées ou de mauvaise qualité. RETRAIT D’UNE VIDÉOCASSETTE 1)Dans le mode Stop, appuyez sur la touche ...

  • Emerson CETD204 - page 78

    - 26 - FR 1C29 LECTURE LECTURE NORMALE Vérifiez que ... • L'appareil est sous tension. 1 Insérez une vidéocassette comportant un 1 enregistrement. Si la languette de protection contre l’effacement a été retirée, l’appareil commencera automatiquement la lecture. 2 P our commencer la lecture Appuyez sur la touche PLA Y . 3 P our arr? ...

  • Emerson CETD204 - page 79

    Cette fonction permet d’améliorer la qualité de l’image quand vous faites jouer des vidéocassettes usées comme les vidéocassettes de location 1 Sélectionnez “RÉGLA GES DE L ’USA GER” Appuyez sur la touche SETUP de la télécommande. Appuyez sur la touche directionnelle K ou L pour pointer sur “RÉGLAGES DE L ’USAGER”. Appuyez ...

  • Emerson CETD204 - page 80

    - 28 - FR 1C29 AV ANT/ARRIÈRE La fonction de recherche chronométrique permet d’avancer la bande à la position désirée en indiquant la durée exacte de lecture que vous désirez sauter . TV/VCR RECHERCHE CHRONOMÉTRIQUE REMARQUES: • La recherche chronométrique peut être configurée pour un maximum de 9 heures 50 minutes (9:50) par interva ...

  • Emerson CETD204 - page 81

    - 29 - FR 1C29 RECHERCHE P AR INDEXAGE Cette fonction permet d’indexer le point de départ pour qu’il soit facile d’y retourner en rembobinant ou en faisant jouer en marche avant rapide. • La marque d’indexage s’inscrit automatiquement quand vous appuyez sur la touche RECORD. La marque s’inscrit aussi au point de départ de l’enregi ...

  • Emerson CETD204 - page 82

    - 30 - FR 1C29 ENREGISTREMENT Vérifiez que ... • L'appareil est sous tension. • Insérez une vidéocassette dont la languette de prévention d’effacement est en place. (Au besoin, rembobiner ou faites l’avance rapide de la bande jusqu’au point où vous désirez commencer l’enregistrement.) REMARQUES: • Cet appareil enregistre et ...

  • Emerson CETD204 - page 83

    V ous pouvez faire des copies des bandes vidéo enregistrées par vos parents et amis pour votre plaisir . V ous ne pouvez pas copier un DVD sur bande vidéo. Branchez votre appareil et une VCR source (lecture) en suivant le diagramme suivant. 1)Insérez la vidéocassette pré-enregistrées dans le VCR source (lecture) ou la caméra vidéo. 2)Insé ...

  • Emerson CETD204 - page 84

    - 32 - FR 1C29 MINUTERIE V ous pouvez configurer l’appareil pour commencer et terminer un enregistrement quand vous êtes à l’extérieur . V ous pouvez définir 8 programmes à enregistrer pour des jours particuliers, quotidiennement ou hebdomadairement au cours d’une période de 1 an. Dans l’exemple ci-dessous, la minuterie a été régl? ...

  • Emerson CETD204 - page 85

    - 33 - FR 1C29 Pour déplacer l’horaire d’un enregistrement automatique avec minuterie. 1) Appuyez sur la touche POWER. 2) Répétez l’étape [1] à la page 32. 3) Appuyez sur la touche RECORD et sélectionnez le programme désiré avec la touche directionnelle K ou L . 4) Appuyez de nouveau sur la touche RECORD. Chaque fois que vous appuyez ...

  • Emerson CETD204 - page 86

    - 34 - FR 1C29 POUR VÉRIFIER L ’HEURE DE DÉBUT/DE FIN 1) Appuyez sur la touche POWER pour que l’indicateur Recording (ENREGISTREMENT) s’éteigne. 2) Appuyez sur la touche SETUP de la télécommande. 3) Confirmez que “PROG EN DIFFÉRÉ” est pointé. 4) Appuyez sur la touche ENTER. Les renseignements sur les programmes s’affichent sur l ...

  • Emerson CETD204 - page 87

    - 35 - FR 1C29 AFFICHAGE À L ’ÉCRAN DÉSIGNA TIONS DES CHAÎNES CÂBLÉES Si vous êtes un souscripteur de la télé sur câble, les chaînes sont indiquées de 1 à 125. Les câblo-diffuseurs désignent souvent les chaînes avec des lettres ou un combinaison de lettres et de nombres. V euillez consulter votre câblo-diffuseur local. V oici un ...

  • Emerson CETD204 - page 88

    – 36 – FR 01A1 1 À PROPOS DES DISQUES Cet appareil permet de lire les disques suivants. ¡ D VD video ¡ D VD-R/R W* ¡ D VD+R/R W* ¡ A udio CD ¡ CD-R/R W* ¡ MP3* * Certains disques ne peuvent pas être lus à cause du type et de la méthode de gravure utilisés. • Il arrive que certains disques DVD-R/R W , DVD+R/R W , ou CD-R/R W réalis ...

  • Emerson CETD204 - page 89

    – 37 – FR 01A1 1 LECTURE DE BASE P our commencer ¡ Au besoin, allumez l’amplificateur et les autres dis- positifs. 1 Appuyez sur la touche PO WER. ¡ L ’appareil s’allume. 2 Appuyez sur OPEN/CLOSE pour ouvrir le plateau. 3 Placez le disque de v otre choix sur le plateau, avec l’étiquette ver s le haut. MP3 CD DVD-V LECTURE D’UN DISQ ...

  • Emerson CETD204 - page 90

    – 38 – FR 01A1 1 LECTURE ÉT APE P AR ÉT APE 1 Appuyez sur la touche P A USE pendant la lecture. ¡ Une pause sera effectuée pendant la lecture et le son sera mis en soudine. 2 Le disque av ance d’une image à chaque pression de la touche P A USE. 3 P our quitter la lecture pas-à-pas, appuyez sur la touche PLA Y . DVD-V REPRISE 1 Appuyez s ...

  • Emerson CETD204 - page 91

    – 39 – FR 01A1 1 RECHERCHE DE PISTE Il y a trois manières de commencer la lecture d’un Audio CD et d’un MP3 à une piste spécifique. A l’aide des touches numériques de la télécommande 1 Appuyez sur les touches n umériques pour saisir le numér o de la piste voulue. ¡ La lecture commence à partir de la piste sélectionnée. ¡ Pour ...

  • Emerson CETD204 - page 92

    – 40 – FR 01A1 1 RÉPÉTER RÉPÉTER LE TITRE / CHAPITRE P our activer la fonction Répéter , appuyez sur la touche REPEA T pendant la lecture . ¡ Le mode de répétition change de la façon décrite ci- dessous chaque fois que vous appuyez sur la touche. DVD-V La fonction REPEA T n’est disponible que pendant la lecture. CHAPITRE TITRE HF ( ...

  • Emerson CETD204 - page 93

    – 41 – FR 01A1 1 Quand un cédé avec fichiers MP3 est inséré dans l’ap- pareil, appuyez sur la touche DISC MENU pour appel- er le menu MP3 sur l’écran du téléviseur . 1 En mode d’arrêt, appuyez sur les touc hes directionnelles ( K / L ) pour sélectionner le groupe ou la piste souhaitée. ¡ Si un groupe est sélectionné, appuyez ...

  • Emerson CETD204 - page 94

    – 42 – FR 01A1 1 LANGUE AUDIO L ’appareil vous permet de sélectionner une langue pendant la lecture du DVD (si plusieurs langues sont disponibles). 1 Appuyez sur la touche A UDIO pendant la lecture. 2 Appuyez plusieur s fois sur la touche A UDIO pour sélectionner la langue voulue. REMARQUE ¡ Si votre langue n’est pas indiquée après plu ...

  • Emerson CETD204 - page 95

    – 43 – FR 01A1 1 Pour les DVD-V 1 Appuyez sur la touche DISPLA Y pendant la lecture pour v oir le chapitre en cours. ¡ Le temps écoulé et restant du chapitre en cours s’affiche. 2 Appuyez encore sur la touche DISPLA Y pendant la lecture pour v oir le titre en cours. ¡ Le temps de lecture écoulé et restant du titre en cours s’affiche. ...

  • Emerson CETD204 - page 96

    – 44 – FR 01A1 1 MODIFICA TION DES ÉLÉMENTS DE CONFIGURA TION DU LECTEUR DVD L ’option langue n’est pas disponible sur certains disques. 1 Appuyez deux f ois sur la touche SETUP en mode ST OP pour faire apparaître le menu configuration du D VD . ¡ Si le menu n’apparaît pas, appuyez encore sur la touche PLA Y , sur la touche STOP puis ...

  • Emerson CETD204 - page 97

    – 45 – FR 01A1 1 RÉGLAGES AUDIO Choisissez le réglage du son adapté à votre appareil parce qu’il affecte seulement la lecture de disques DVD. 1 App uyez deux f ois sur la touche SETUP en mode ST OP pour faire apparaître le menu confi guration du D VD . ¡ Si le menu n’apparaît pas, appuyez encore sur la touche PLA Y , sur la touche ST ...

  • Emerson CETD204 - page 98

    – 46 – FR 01A1 1 – 46 – NIVEA UX DE CONTRÔLE ¡ T OUT T out le verrouillage parental est effacé. ¡ Niveaul 8 T ous les disques DVD, de tous les niveaux (adulte/général/enfants), peuvent être lus. ¡ Niveaux de 7 à 2 Seuls les disques DVD d’usage général ou pour enfants peuvent être lus. ¡ Niveau 1 Seuls les disques DVD pour enf ...

  • Emerson CETD204 - page 99

    – 47 – FR 01A1 1 Il arrive qu’un problème de fonctionnement puisse être facilement résolu en vérifiant des possibilités qui semblent évidentes, mais sont parfois ignorées. A vant de faire réparer , vérifier les éléments suivants. V ous pourriez épargner du temps et de l’ar gent. Mode TV/VCR GUIDE DE DÉP ANNAGE PROBLÈME ACTION ...

  • Emerson CETD204 - page 100

    – 48 – FR 01A1 1 PROBLÈME A VEC LE SOUS- SOLUTION POSSIBLE TITRAGE CODÉ Ma appareil montre des sous-titres • V ous regardez une émission en direct et les fautes d'orthographe faites mal orthographiés. • par la société de production du sous-titrage codé peuvent passer sans • être corrigées. Un programme préenregistré ne pr? ...

  • Emerson CETD204 - page 101

    – 49 – FR 01A1 1 REMARQUES: • Certaines fonctions ne sont pas disponibles dans certains modes, mais ce n’est pas un dysfonctionnement. Lisez les descriptions de ce Guide d’utilisation pour avoir de plus amples détails sur la façon correcte de procéder . • La lecture à partir d’une piste voulue et la lecture aléatoire ne sont pas ...

  • Emerson CETD204 - page 102

    – 50 – FR 01A1 1 NETTOY AGE DU BOÎTIER • Essuyez le panneau de commande et les autres sur- faces extérieures de l’appareil avec un chiffon imbibé d’eau tiède et séchez-les. • N’utilisez jamais ni solvant ni alcool. Ne vaporisez pas d’insecticide près de l’appareil. Ces produits chimiques risquent d’endommager et décolorer ...

  • Emerson CETD204 - page 103

    – 51 – FR 01A1 1 ÉCRAN : canon en ligne de 20 pouces, tube à parcours électronique dirigé à 90º Système de télé : NTSC-M Système de sous-titrage codé : §15.1 19/FCC Têtes vidéo : Rotatif à quatre têtes Largeur de la bande : 1/2 pouce V itesse de la bande SP : 33,40 mm/seconde LP : 16,67mm/seconde SLP : 1 1,12mm/seconde Récepteu ...

  • Emerson CETD204 - page 104

    T1010CL GARANTIE DES APPAREILS DE DIVERTISSEMENT DOMESTIQUE DE EMERSON Nous vous remercions d'avoir acheté cet appareil de divertissement domestique de EMERSON. Votre nouvel appareil, comme tous ceux de notre production, est conforme à des normes de qualité très rigoureuses. Dans des conditions d’utilisation normales, nous sommes certain ...

Manufacturer Emerson Category TV VCR Combo

Documents that we receive from a manufacturer of a Emerson CETD204 can be divided into several groups. They are, among others:
- Emerson technical drawings
- CETD204 manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson CETD204
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson CETD204.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson CETD204, service manual, brief instructions and user manuals Emerson CETD204. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson CETD204.

Similar manuals

A complete manual for the device Emerson CETD204, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson CETD204 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson CETD204.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson CETD204 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson CETD204, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson CETD204, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson CETD204 - which should help us in our first steps of using Emerson CETD204
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson CETD204
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson CETD204 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson CETD204?

Use the form below

If you did not solve your problem by using a manual Emerson CETD204, ask a question using the form below. If a user had a similar problem with Emerson CETD204 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)