English dropdown-ico

Manual Cisco Systems 7200 VXR

188 pages 6.77 mb
Download

Go to site of 188

Summary
  • Cisco Systems 7200 VXR - page 1

    Americas Hea dquarters Cisco System s, Inc . 170 West Ta sman Driv e San Jos e, CA 95134 -1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco 720 0 VXR Installation and Configuration Guide Custom er Order Number : Text Pa rt Num ber: OL -5013-09 ...

  • Cisco Systems 7200 VXR - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODU ...

  • Cisco Systems 7200 VXR - page 3

    3 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 CONTENTS Preface iii Document Revi sion Hi story iii Audienc e iv Organi zation iv Document Conv entions iv Warni ng Defi nition vi Ter ms and Acrony ms ix Relat ed Do cume ntatio n x Obtain ing Docu mentat ion and Sub mitti ng a Serv ice Req uest xi CHAPTER 1 Cisco 7200 VXR Pr od ...

  • Cisco Systems 7200 VXR - page 4

    Cont ent s 4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Functi onal Overvi ew 1-53 Chassi s Slot an d Logical Inte rface Number ing 1- 54 MAC Addr ess 1-57 Onlin e Insert ion and Remov al 1-57 Enviro nmenta l Monito ring and Report ing Fu nctions 1-59 Envi ronm ental Moni tori ng 1-59 Repo rting Func tions 1-62 Fan Fa ilures 1 ...

  • Cisco Systems 7200 VXR - page 5

    Content s 5 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Attachi ng a Chas sis Groun d Connec tion 3-17 Connect ing Por t Adapter Cables 3-19 Connect ing I/ O Control ler, NPE- G1, or NPE- G2 Cable s 3-19 Connect ing to Gigabit Et hern et Slots an d Ports 3-19 Gigabi t Etherne t SFP Modul e Conne ctions 3-20 Mode-Cond iti onin ...

  • Cisco Systems 7200 VXR - page 6

    Cont ent s 6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Checki ng the Run ning Conf igur ation S etting s 4-15 Perfor ming Ot her Confi gurat ion Tasks 4-15 Using sho w Comman ds to Check th e Inst alla tion 4-16 Replac ing or Re cover ing a Lost Pa ssword 4-17 Overvi ew of the Pa ssword Recovery Pr ocedu re 4-17 Detai ls o f ...

  • Cisco Systems 7200 VXR - page 7

    Content s 7 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Bit 1 3 A-4 Bit 1 5 A-5 Displa ying t he Config urati on Regist er While Ru nning Cisco IOS A-5 Displa ying t he Config uration Regist er While Ru nning ROM Monitor A-5 Setti ng the Con figura tion Regi ster While Runni ng Cisco IOS A-6 Setti ng the Con figura tion Regi ...

  • Cisco Systems 7200 VXR - page 8

    Cont ent s 8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 ...

  • Cisco Systems 7200 VXR - page 9

    iii Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Preface This pr eface descr ibes who should r ead the Cisco 7200 VX R Installatio n and Configuration Guide , how it is organized , and its do cument con ventions. It discusses th e objectives, audie nce, and organiza tion of this publicatio n. The follo wing sections are in thi ...

  • Cisco Systems 7200 VXR - page 10

    iv Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Preface Audien ce Y ou can access th e most curren t Cisco docume ntation on t he W orld W ide W e b at http://www .cisc o.com. T r anslated d ocumentation is a v ailabl e at http:/ /www .cisco.c om/public/co untries_lan guages.shtml. Audience T o use this public ation, you should ...

  • Cisco Systems 7200 VXR - page 11

    v Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Pre face Document C onventi ons Screen e xamples use t he fol lo wing con vention s: Notes , cautionar y stateme nts, an d safety warnin gs use the se con ventions : Note Means r eader ta ke no te . No tes co nta in hel pful su ggest ions or r efer ence s to mat erial s no t co nt ...

  • Cisco Systems 7200 VXR - page 12

    vi Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Preface Warning De finiti on Warning Definition War ni ng IMPORT ANT SAFE TY INSTRUCT IONS This warning symbol means danger . Y ou are in a si tuation that could cause bodily injury . Before you work on any equipment, be aware o f the hazards in volved with electri cal circuitry an ...

  • Cisco Systems 7200 VXR - page 13

    vii Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Pre face Warning Definition Attention IMPORTANTES IN FORMA TIONS DE SÉCU RITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une si tuation pouvant causer des blessures ou des dommages corpo rels. A vant de travailler sur un équipement, soyez co n ...

  • Cisco Systems 7200 VXR - page 14

    viii Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Preface Warning De finiti on Adva rsel VIKTIGE S IKKERHETSI NSTRUKS JONER Dette varselssymbolet bety r fare. Du befinner deg i en situasjon som kan forårsake personskade. Før du utfører arbeid med utstyret, bør du være oppmerkso m på farene som er forbundet m ed elektriske ...

  • Cisco Systems 7200 VXR - page 15

    ix Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Pre face Term s an d Acr onym s Terms and Acronyms T o fully u ndersta nd the conten t of thi s user guide, you shoul d be fam iliar w ith th e following t erms and acro nyms: • Cache—Memo ry with f ast acc ess and small capaci ty used to tempor arily store recently accessed ...

  • Cisco Systems 7200 VXR - page 16

    x Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Preface Related Document ation • EPROM—erasa ble p rogra mmab le re ad-on ly mem ory • FR U—fiel d-re place able un it (ro uter c ompon ents that do not r equi re rep lacemen t by a Cisco-certif ied service pro vider) • GBIC—Gigabit I nterfac e Con v erter • Gbps—gig ...

  • Cisco Systems 7200 VXR - page 17

    xi Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Pre face Obtaining Documentation and Submitting a Service Request Obtaining Do cumentation an d Submitting a Service Reque st For informat ion on obtaini ng docume ntatio n, submittin g a service re quest, and gathe ring addit ional inform ation, see the mon thly What’s Ne w in ...

  • Cisco Systems 7200 VXR - page 18

    xii Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Preface ...

  • Cisco Systems 7200 VXR - page 19

    C HAPTER 1-1 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 1 Cisco 7200 VXR Product Overview This cha pter provides physic al and fun ctional overviews of the Cisco 720 0 VXR router s. Descripti ons and e xamples of softw are command s ar e incl uded when the y are ne cessary for repl acing , ins talli ng, configuring, or m aint ...

  • Cisco Systems 7200 VXR - page 20

    1-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Physi cal Desc ripti on The Cisc o 7200 VXR rou ters suppor t the high-speed network processing engine, N PE-G2, a nd all other av ailable networ k processing en gines. Th e NPE-G2 pr ovides high-s peed perf ormance wi th the Mot o ro la ...

  • Cisco Systems 7200 VXR - page 21

    1-3 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Physical Descri ption See Ta b l e 1-1 fo r the Cisco 7200 VXR p hysical sp ecifications and p o wer r equireme nts: Ta b l e 1 -1 Ph ysical Specifi cations Description Specification Midp lane T wo primary PCI buses, and one secon dary P ...

  • Cisco Systems 7200 VXR - page 22

    1-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Software Requi rements Note For a chas sis footpr int, additio nal dime nsions, and cl earance requirem ents for the Ci sco 7 200 VXR routers, see the “Site Requiremen t Guidelines” sectio n on page 2-3 in Chapter 2, “P reparing fo ...

  • Cisco Systems 7200 VXR - page 23

    1-5 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Cisco 7204VXR Overview W it h the NPE-G1 or NPE-G2 inst alled and the Port Adapter Jacket Card installed in the I/O contr oller slot, a n additiona l port ada pter slot is a v ailab le. Note If you have diff iculty i nstalling a pro cess ...

  • Cisco Systems 7200 VXR - page 24

    1-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Cisco 7204VXR Overview Figur e 1 -2 Ci sco 7204VXR Ro ute r—Rear V iew The NP E-G2 and NPE-G1 have e xtern al co nnecto rs and sta tus LEDs for th e three Gigabit Et hernet interf aces as well as console and aux iliary ports. The net w ...

  • Cisco Systems 7200 VXR - page 25

    1-7 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Cisco 7206VXR Overview Three inte rnal fa ns dra w cooling air in to the ch assis and ac ross interna l components to maintain an accepta ble op eratin g temper ature. ( See Figure 1-2 .) The three f ans are enclosed in a tray that is lo ...

  • Cisco Systems 7200 VXR - page 26

    1-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Cisco 7206VXR Overview W it h the NPE-G1 or NPE-G2 inst alled and the Port Adapter Jacket Card installed in the I/O contr oller slot, a n additiona l port ada pter slot is a v ailab le. Note If you have diff iculty i nstalling a pro cess ...

  • Cisco Systems 7200 VXR - page 27

    1-9 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Cisco 7206VXR Overview Figur e 1-4 C i s c o 7206VXR Rout er—Rear V iew The re ar of th e Cisc o 7206 VXR router provides access t o the network processing eng ine or networ k services engine a nd up t o two power suppli es. (See Figur ...

  • Cisco Systems 7200 VXR - page 28

    1-10 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Adjace nt to the power supply ba ys are two chassi s groundin g receptacl es that pr ovide a chassis grou nd connec tion for ESD equipm ent or a two-hole groundi ng lug . (See Figure 1-4 .) Three inter nal fans ...

  • Cisco Systems 7200 VXR - page 29

    1-11 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units • Rack-M ount and Cabl e-Manage ment Kit, page 1-53 Note Re placeme nt instruc tions for removing and re placing FR Us are contai ned i n separ ate onl ine docu ments. For example, if you nee d to replac e an ...

  • Cisco Systems 7200 VXR - page 30

    1-12 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits – The NP E-175 has an RM527 0 microp rocessor tha t operate s at an interna l clock spee d of 200 MHz. – The NP E-100 and NP E-150 have an R4700 microp rocessor that operat es at an inte rnal cloc k spee d ...

  • Cisco Systems 7200 VXR - page 31

    1-13 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units The NP E-150 has 1 MB of SRAM and the NPE-200 has 4 MB of SRAM. N o other network processing engin e or net work service s engine has SRAM. • Cach e memory – The NPE -G2 has tw o le v els o f cach e: a pr i ...

  • Cisco Systems 7200 VXR - page 32

    1-14 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits • NPE-G1 i s repres ented b y Figure 1-6 . Ta b l e 1-4 l ists NPE-G1 memory specific ations, and Ta b l e 1- 5 lists memo ry configuration s. • NSE-1 i s repre sente d by Figure 1-7 . Ta b l e 1-6 lists NS ...

  • Cisco Systems 7200 VXR - page 33

    1-15 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -5 NPE-G2 Ta b l e 1-2 lists the NPE-G2 memory speci fi cation, and Ta b l e 1-3 lists the factory-installed SDRAM configurati ons and their p roduct nu mbers. 1 Midp lane conne ctors 6 Flash memo ry ...

  • Cisco Systems 7200 VXR - page 34

    1-16 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -6 NPE-G1 Ta b l e 1-4 lists the NPE-G1 memory speci fi cation, and Ta b l e 1-5 lists the factory-installed SDRAM configurati ons and their p roduct nu mbers. Primary c ache 32 KB (1 6 KB instructi o ...

  • Cisco Systems 7200 VXR - page 35

    1-17 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Ta b l e 1 -4 NPE-G1 Mem ory Speci fications Memor y T ype Size Quantity Description Compon ent Loc ation on the NPE- G1 Board SDRAM 12 8 MB, 256 MB , 512 MB 2 128-MB, 25 6-MB, or 512-MB SODIMMs J3, J4 Boot ROM ...

  • Cisco Systems 7200 VXR - page 36

    1-18 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1-7 N S E - 1 Ta b l e 1-6 lists the NSE-1 memory specif ications, and Ta b l e 1-7 list s the NSE-1 fact ory-insta lled SDRAM co nfigurations and th eir product nu mbers. 1 Network contr oller b oard 8 ...

  • Cisco Systems 7200 VXR - page 37

    1-19 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -8 NPE-400 Second ary cache 256 KB — RM7000 pro cessor , internal, u nif ied instruct ion and dat a cache U22 T ertiary cache 2 MB (f ix ed) — RM7000 pro cessor , extern al cac he U7 , U9, U12, U ...

  • Cisco Systems 7200 VXR - page 38

    1-20 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Ta b l e 1-8 lists the NPE-400 memory spec ific ations, and Ta b l e 1-9 lists factory-installed SDRAM configurati ons and their p roduct nu mbers. Ta b l e 1 -8 NPE-400 Memory Spec ifications Memor y T ype Siz ...

  • Cisco Systems 7200 VXR - page 39

    1-21 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -9 NPE-300 Ta b l e 1-1 0 lists th e NPE- 300 memory specification s, and Ta b l e 1-11 lists fa ctory-installe d SDRAM configurati ons and their p roduct nu mbers. 1 Midp lane conne ctors 9 RM7000 m ...

  • Cisco Systems 7200 VXR - page 40

    1-22 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Note Th e NPE-300 c ontains two bank s of SDRAM. Both SDRAM ba nks are used for all packet me mory requirem ents; howev er , bank 0 is u sed exclusively for packet m emory and i s set at a f ixed configuratio n ...

  • Cisco Systems 7200 VXR - page 41

    1-23 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -1 0 NPE-225 Ta b l e 1-1 2 lists th e NPE- 225 memory specification s, and Ta b l e 1-13 lists fa ctory-installe d SDRAM configurati ons and their p roduct nu mbers. 1 Network contr oller b oard 6 Ha ...

  • Cisco Systems 7200 VXR - page 42

    1-24 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Ta b l e 1 -12 NP E-22 5 Memo ry Spe cif icat ion s Memor y T ype Size Quantity Description Location 1 1. Location on p rocessing engine b oard. See Figur e 1-10 . SDRAM 64, 128, 256 MB 1 SDRAM s lot 64- MB, 12 ...

  • Cisco Systems 7200 VXR - page 43

    1-25 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -1 1 NPE-200 Ta b l e 1-1 4 lists th e NPE- 200 memory specification s, and Ta b l e 1-15 lists fa ctory-installe d DRAM configurati ons and their p roduct nu mbers. 1 System controller 7 Midp lane co ...

  • Cisco Systems 7200 VXR - page 44

    1-26 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Note T o prevent DR AM err ors in t he N PE-100, N PE-15 0, or N PE-200, and to ensure that y our syste m initializ es correctly at startup, DRAM bank 0 (socket U18 and U 25, or U 11 and U25) must con tai n no ...

  • Cisco Systems 7200 VXR - page 45

    1-27 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -12 NPE-1 75 Ta b l e 1-1 6 lists th e NPE- 175 memory specification s, and Ta b l e 1-17 lists memor y config urations. 1 Network contr oller b oard 6 Hand le 2 System controller 7 Midp lane co nnect ...

  • Cisco Systems 7200 VXR - page 46

    1-28 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Ta b l e 1 -16 NPE-1 75 Memor y Specific ations Memor y T ype Size Quantity Description Location 1 1. Location on p rocessing engine b oard. See Figur e 1-12 . SDRAM 64 or 12 8 MB 1 SDRAM slot DIMM U15 Boot ROM ...

  • Cisco Systems 7200 VXR - page 47

    1-29 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -13 NP E-150 Ta b l e 1-1 8 lists th e NPE- 150 memory specification s, and Ta b l e 1-19 lists memor y config urations. 1 System controller 7 Midp lane co nnecto rs 2 R470 0 micropr ocess or 8 T e mp ...

  • Cisco Systems 7200 VXR - page 48

    1-30 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Note T o prevent DR AM err ors in t he N PE-100, N PE-15 0, or N PE-200, and to ensure that y our syste m initializ es correctly at startup, DRAM bank 0 (socket U18 and U 25, or U 11 and U25) must con tai n no ...

  • Cisco Systems 7200 VXR - page 49

    1-31 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Note T o prevent DR AM err ors in t he N PE-100, N PE-15 0, or N PE-200, and to ensure that y our syste m initializ es correctly at startup, DRAM bank 0 (socket U18 and U 25, or U 11 and U25) must con tai n no ...

  • Cisco Systems 7200 VXR - page 50

    1-32 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits BCM12500 CPU at 500Mhz, Implementation 1, Rev 0.1, 512KB L2 Cache 6 slot VXR midplane, Version 2.0 Input/Output Controller This sec tion descr ibes fi ve different models of I/O contr ollers. T hese mode ls are ...

  • Cisco Systems 7200 VXR - page 51

    1-33 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units • Flash m emory f or storin g the boot hel per imag e • Boot R OM for sto ring suff icient code for bo oting the Cisc o IOS software • T wo environmen tal sens ors fo r monitor ing t he cooli ng air a s i ...

  • Cisco Systems 7200 VXR - page 52

    1-34 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -16 C7200-I/O-2FE/ E—With T wo RJ -45 Ether net/F ast Ether net Receptacles 1 T emp eratur e sensor 7 SRAM (U19) 2 Midp lane conne ctors 8 Capti v e installation scre w 3 Batt ery for SR AM 9 PC Car ...

  • Cisco Systems 7200 VXR - page 53

    1-35 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -17 C7200-I/O-FE—With MII an d RJ-45 F ast Ether net Recepta cles (V ersion 1) 1 T emp eratur e sensor 8 PC Card slots 2 Midp lane conne ctors 9 Optio nal Fast Ethe rnet i nterface ( MII port and RJ ...

  • Cisco Systems 7200 VXR - page 54

    1-36 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -18 C7200-I/O-FE—With MII an d RJ-45 F ast Ether net Recepta cles (V ersion 2) Note Y o ur I/O cont roller wi th the MII a nd RJ-4 5 Fast Ethe rnet rece ptacle s (C720 0-I/O-FE) might l ook like Fig ...

  • Cisco Systems 7200 VXR - page 55

    1-37 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Note In n Figure 1-2 0 , the N VRAM is re placed by a n SRAM component (U14) that i s made to act like the NVRAM b y the additi on of some ex ternal compo nents, one of which is the b utton-ty pe lithium batt e ...

  • Cisco Systems 7200 VXR - page 56

    1-38 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -20 C7200-I/O—Without F ast Ether net P or t (V ersio n 2) 1 T emp eratur e sensor 8 Battery fo r SRAM 2 FPGA configurat ion PR OM (U9) 9 Capti ve inst allation scre w 3 Midp lane conne ctors 10 PC ...

  • Cisco Systems 7200 VXR - page 57

    1-39 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Figur e 1 -21 C7200-I/O-FE-MII—With Sing le MII F ast Ether net Receptacle Note C72 00-I/O-FE -MII, althou gh still supp orted by Cisco, was discontinue d as an orderab le product in May 1998. 1 T emp eratur ...

  • Cisco Systems 7200 VXR - page 58

    1-40 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Ta b l e 1-2 3 lists the I/O controller memory compo nents. LED Descriptions All I/O contro llers ha v e LEDs, and the NPE-G1 a nd NPE- G2 al so have interface s that have LEDs. The I/O controlle r fac eplate c ...

  • Cisco Systems 7200 VXR - page 59

    1-41 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units or not an I/O cont roller is in the system with the NPE-G 1 or NPE-G2. The SLO T AC TIVE LED is on if there is a CompactFlash Disk in the NPE-G1. Th e CF A CTV LED is on if there is a CompactFlash Disk in the N ...

  • Cisco Systems 7200 VXR - page 60

    1-42 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits NPE-G1 L EDs USB USB ports Flas hing gree n Activ ity . Of f No acti vity . CF A CTV CompactFl ash Disk Flashi ng green Acti vity . Of f No acti vity . SYST ST A T System sta tus Solid gr een Cisco I OS has suc ...

  • Cisco Systems 7200 VXR - page 61

    1-43 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Input/Output Controller C7200-I/O LEDs Figure 1-22 shows the LED s on the I/O controll er model wit h no Ethern et ports (C 7200-I/O ). This I/O control ler has n o p ort-s pecif ic LEDs . Ta b l e 1- 24 de scr ...

  • Cisco Systems 7200 VXR - page 62

    1-44 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -23 C7200-I/O-GE+E LEDs and CPU Reset Bu tt on Input/Output Controller C7200-I/O-2F E/E LEDs Figure 1-24 shows the LED s on th e I/O control ler wi th the two autose nsing 1 0/100-Mbps RJ-45 recepta c ...

  • Cisco Systems 7200 VXR - page 63

    1-45 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Input/Output Controller C7200-I/O-FE LEDs Figure 1-25 sho ws the LEDs on the I/O controlle r with the Fast Ether net port that is equipped with an MII rece ptacle and an RJ-45 rece ptacle (C7200-I/ O-FE), and T ...

  • Cisco Systems 7200 VXR - page 64

    1-46 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -25 C7200-I/O-FE LEDs an d CPU Reset B ut t on Ta b l e 1 -29 C7200-I/O-FE I/O Contr oller LEDs LED Color Function MII EN Green Indicates th at the F ast Ethe rnet MII receptacl e is initi alized and ...

  • Cisco Systems 7200 VXR - page 65

    1-47 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Note A n MII LINK LE D is not provided on th is I/O contro ller bec ause the L ED is provided on externa l transce i ver s that a re requi red for connec ting t o the MII r ecept acle on th e I/O con troller . ...

  • Cisco Systems 7200 VXR - page 66

    1-48 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Note The port adapter s installed in the Cisc o 7200 VX R routers suppor t OIR. For an explanation of OIR, see the “Online In sertio n and Re mov al” sec tion on page 1- 57 . All port adapte rs and service ...

  • Cisco Systems 7200 VXR - page 67

    1-49 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units Powe r Supplies The Cisc o 7200 VXR rout ers co me equ ipped wit h one 280W AC-input power supply . (A 280 W DC-inp ut power supply is av ailab le as an optio n.) Y ou mu st order the sec ond power sup ply sep ...

  • Cisco Systems 7200 VXR - page 68

    1-50 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -28 Cisco 72 0 0 Ser ies AC-Inp ut P o w er Supply The A C-inpu t po wer sup ply has a recep tacle fo r an A C -input po wer cable . A modular po wer cable connect s the A C-input po wer supply to t h ...

  • Cisco Systems 7200 VXR - page 69

    1-51 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Field-Repl aceabl e Units The DC -inpu t power supply ha s DC-input power leads tha t are har dwired t o a DC-in put termi nal bloc k. A cable t ie is shipped wit h each DC-i nput power supply to secure the leads to the power sup ply fa ...

  • Cisco Systems 7200 VXR - page 70

    1-52 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Field-Repl aceable U nits Figur e 1 -30 Ci sco 7200 VXR Chassis— 7206VXR Sho wn CompactF lash Di sks, Fl ash Disks, and PC Ca rds The Cisc o 7206VX R supports u p to two installed Fla sh Disks or two PC Car ds, also cal led flash me m ...

  • Cisco Systems 7200 VXR - page 71

    1-53 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew See Ta b l e 1-31 , Ta b l e 1-32 , and Ta b l e 1- 33 for the factory- install ed flas h memory card opt ions an d thei r product num bers, th e Flash Disk me mory opt ions and th eir produc t number s, and the ...

  • Cisco Systems 7200 VXR - page 72

    1-54 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Chassis S lot and Log ical Interface Nu mbering In the Cisco 7 200 VXR router s, the port-adapte r -slot -number is the chassis slot in wh ich a port adapte r is installed, wh ereas the lo gical-in terface-number i ...

  • Cisco Systems 7200 VXR - page 73

    1-55 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew Figur e 1 -32 Po rt Ad apt er Slot Nu mber ing—Cisco 7206V XR The Me dia Acc ess Control (MA C) addr ess or hardware addr ess is a standa rdized da ta lin k layer ad dress that i s require d for cer tain netw o ...

  • Cisco Systems 7200 VXR - page 74

    1-56 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Router# show interfaces FastEthernet0/0 is administratively down, line protocol is down Hardware is i82543 (Livengood), address is 0000.0000.0000 (bia 0000.0000.0000) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, r ...

  • Cisco Systems 7200 VXR - page 75

    1-57 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew The follo wing example sho ws the display for the f irst port on the Fast Ethernet port adapter in port adap ter sl ot 5: Router# show interface fastethernet 5/0 FastEthernet5/0 is up, line protocol is up Hardwar ...

  • Cisco Systems 7200 VXR - page 76

    1-58 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Note The Port Adapter Jacket Car d does not support OIR. Ho weve r , the port adapte r installed in the Port Adapte r Jacket C ard does support OIR. Note A s you disengag e the port adapter fro m the ro uter or swi ...

  • Cisco Systems 7200 VXR - page 77

    1-59 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew Environmenta l Monitoring an d Reporting F unctions En vironme ntal mon itoring and repor ting function s are con trolled by the net work proce ssing engi ne or network se rvices e ngine and all o w you t o maint ...

  • Cisco Systems 7200 VXR - page 78

    1-60 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Ta b l e 1 -34 NPE-G2 Pr ocessor -Monit or ed T empe rat ur e Thres holds NPE-G2 1 1. With an I/O controller installed. Low W arning High Warning Shutdown NPE inlet 111•F (44 •C) F (44•C) 138•F (59•C) F ( ...

  • Cisco Systems 7200 VXR - page 79

    1-61 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew Note A low war ni ng o r h ig h wa rn in g me ss ag e d o es n o t m ea n t ha t th e r outer is at ri sk of mal functioni ng or bei ng dama ged. The l ow warning and high warn ing ra nges in Ta b l e 1-34 and Ta ...

  • Cisco Systems 7200 VXR - page 80

    1-62 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Below are sample high c ritical messa ges from c hassis wit h 3V and 5V power supp lies in Cisco IOS Releas e 12.0( 23): Router(boot)# 00:02:47:%ENVM-2-ENVCRIT:+3.45 V measured at +3.72 Router(boot)# 00:06:51:%ENVM ...

  • Cisco Systems 7200 VXR - page 81

    1-63 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 1 Cisco 7200 VXR Product Ove rview Fun ctio nal Ov ervi ew Foll owi ng is sam ple outp ut of the show en vir onment last comman d: NPE300(boot)# show environment last chassis inlet previously measured at 26C/78F chassis outlet 1 previously measured at 28C/82F chassis out ...

  • Cisco Systems 7200 VXR - page 82

    1-64 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 1 Cisc o 7200 VXR Product Ove rview Functi onal Overvi ew Foll owi ng is sam ple outp ut of the show en viron men t al l comman d: NPE300(boot)# show environment all Power Supplies: Power Supply 1 is empty. Power Supply 2 is Zytek AC Power Supply. Unit is on. Temperature ...

  • Cisco Systems 7200 VXR - page 83

    C HAPTER 2-1 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 2 Preparing for Installation Before installin g your Cisco 7200 VX R rou ter , you should con sider t he power and cablin g require ments that must be in place at your inst allation site, the equipment you need to install th e router , and the en vironmental conditio ns ...

  • Cisco Systems 7200 VXR - page 84

    2-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Electri cal Equipm ent Guide lines • Four M4 x 8-mm Phillips flathead scre ws to secure the rack-mount brack ets to the chassis • Six 10-3 2 x 3 /8-inch slotted bi nderhe ad screws to secure the r ack-mount brac kets to th e rack rails • ...

  • Cisco Systems 7200 VXR - page 85

    2-3 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Site Requirement Guidelines Site Requirement Guidelines The en vironmental monito ring fun ctionality in the Cisco 7200 VXR rou ters pr otects t he syst em an d compone nts from potentia l damage from overvoltage and overtemperature condi tio ...

  • Cisco Systems 7200 VXR - page 86

    2-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Site Requireme nt Guidelines Figur e 2-1 Inter nal Airflo w—T op V iew The le ft and righ t sides of the ch assis must rema in unobstru cted to en sure adequat e air flow and prevent ov erh eating inside the chassis ; we recom mend at leas t ...

  • Cisco Systems 7200 VXR - page 87

    2-5 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Site Requirement Guidelines Rack-Mounting Guidelines Before installin g the Cisco 7200 VXR router in a rack, read th e “Site Preparati on and Safety” section of the Re gulatory Compliance and Saf ety Inform ation for Ci sco 7200 Se ries R ...

  • Cisco Systems 7200 VXR - page 88

    2-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Site Requireme nt Guidelines Figur e 2-2 Cisco 720 0 VXR Rout er F ootpr int and Oute r Dimensions 1 Network processing en gine width 13. 8 in. (35.05 cm) 4 F an tray dept h 15. 81 in. (40. 16 cm ) 2 Chass is de pth ( incl udi ng cab le ser vic ...

  • Cisco Systems 7200 VXR - page 89

    2-7 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Site Requirement Guidelines When plann ing your rack i nstallation, c onsider th e foll ow ing guideli nes: • If you plan to use an equipm ent shelf, ensure that the shelf is const ructed to s upport the w eight and dimensio ns of the chas ...

  • Cisco Systems 7200 VXR - page 90

    2-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Site Requireme nt Guidelines Power Con nectio n Guidelines Follow these precautions and recom mendations w hen planni ng power connecti ons to a Cisco 720 0 VXR router : • Check the pow er at your site before installatio n and periodically af ...

  • Cisco Systems 7200 VXR - page 91

    2-9 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Initial Configuration Information If wires exceed re comm ended distanc es, or if wir es pass between buildings, give special consider ation to the ef f ect of a lightning strik e in your vicinity . The electr omagnetic pulse caused by lightn ...

  • Cisco Systems 7200 VXR - page 92

    2-10 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Cisco 7200 VXR Router I nstallation Checklist Following is som e of th e infor mation y ou ar e likely t o nee d, depe nding o n your c onfiguratio n: • Host n ame fo r the router • Passw ords to pre v ent unauthori zed pri vile ged-le vel ...

  • Cisco Systems 7200 VXR - page 93

    2-11 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Cisco 7200 VXR Router Installation Checklist Ta b l e 2-2 Cisco 7200 VXR Rout er Insta llation Chec klist Ta s k V erified By Date Date rou ter re cei ved Router and all accesso ries unpa cked T y pes and numbers of inte rfaces verified Safe ...

  • Cisco Systems 7200 VXR - page 94

    2-12 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Checking the Shipping Contai ner Contents Checking the Sh ipping Con tainer Contents Once y ou recei ve your C isco 7200 VXR r outer, use the foll owing procedu re to ch eck the conte nts of the shi ppi ng co nta iner . Use the Cisco 7200 VXR ...

  • Cisco Systems 7200 VXR - page 95

    2-13 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 2 Preparing for Install ation Site Log Site Log A site log pro vides a historical r ecord of all action s rele va nt to the Cisco 7200 VXR route r oper ation and mainten ance. K eep your si te log in a com mon pl ace n ear the chassis where any one wh o perf orms tasks h ...

  • Cisco Systems 7200 VXR - page 96

    2-14 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 2 Preparing for Installation Site Log Ta b l e 2-4 on page 2-14 shows a sample site log page. Make copies of the samp le or design your o wn site log to meet t he ne eds of y our sit e and equipm ent. Ta b l e 2-4 Site Log Sa mple Date Descr iptio n of Act ion Perform ed ...

  • Cisco Systems 7200 VXR - page 97

    C HAPTER 3-1 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 3 Installing a Cisco 72 00 VX R Route r This chap ter ex plains ho w to install a Cisco 7200 VXR router. The ch apter contai ns the following sections: • Rack-Moun ting a Cisco 7200 V XR Router, page 3-2 • General T able top or W ork bench Inst allation, page 3-14 ? ...

  • Cisco Systems 7200 VXR - page 98

    3-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter If you do not plan to install y our Cisco 7200 VXR ro uter in a n equi pment r ack, proc eed to the “General T ab letop or W or kbench Insta llation” sec tion on page 3- 14 . Rack-Mounting a C ...

  • Cisco Systems 7200 VXR - page 99

    3-3 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Figur e 3-1 T ypical F our -P ost Equip ment Rac k P osts and Mounting Str ips If you want the port a dapter end ( the front ) of t he ch assis re cessed in the rack, install the rack-m ount bra ...

  • Cisco Systems 7200 VXR - page 100

    3-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter Figur e 3-2 Installing the Chassis in a F our -Post Rac k—Fro nt Installa tion Show n 1 Rack- mount b racket Cisco 7200 XVR eries 4 6 F A S T S E R IA L E N T D T C R D R C L B C D T D T C R D R ...

  • Cisco Systems 7200 VXR - page 101

    3-5 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Figur e 3-3 Installing the Chassis in a T wo -P ost Rack—F r ont Inst allation Sho wn If you plan to install th e cable-m anagem ent brac kets on a Cisco 7 200 VX R route r that you are rack-m ...

  • Cisco Systems 7200 VXR - page 102

    3-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter Figur e 3-4 Rack-Mounting the Chassis in a T w o-P ost Rack with Installed Cable-Mana gemen t Brac kets—F ront Installatio n Sho wn 1 Rack- mount b racket 2 Cable- manage ment b racket 84548 2 E ...

  • Cisco Systems 7200 VXR - page 103

    3-7 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Figur e 3-5 Rack-Mount ing the Ch assis in a Four -Post Rack with Ins talled Cable-Mana gemen t Brac kets—F ront Installatio n Sho wn If you ar e rack -moun ting a Ci sco 7200 VXR rout er from ...

  • Cisco Systems 7200 VXR - page 104

    3-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter Installing the B rackets on t he Front of the Chassis T o install the rac k-moun t and cable -managem ent brack ets on a Cisc o 7200 VXR ro uter for a fron t rack-mount conf iguratio n, complete t ...

  • Cisco Systems 7200 VXR - page 105

    3-9 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Figur e 3-7 Installing the Rac k-Mount Br ack ets on the F r ont of the Chassis so the F r ont Is Recesse d in the R ack Step 5 Repeat Step 1 throu gh Step 4 for th e other ra ck-moun t bracket ...

  • Cisco Systems 7200 VXR - page 106

    3-10 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter Figur e 3-8 Installing the Stan dar d Rear Cab le-Manag e ment Br ack ets w ith an NP E-G1 or NPE-G2—Rout er Fr ont-Mount ed If you have an NPE-G1 or NPE- G2 instal led, you will wan t to insta ...

  • Cisco Systems 7200 VXR - page 107

    3-11 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Installing the NPE-G1 and NPE-G2 Optical C able-Management Bracket Figur e 3-9 I nstal ling the NPE-G1 and NPE-G 2 Optical Cable -Manag ement Br ac k et Step 1 Loosen th e left and righ t capti ...

  • Cisco Systems 7200 VXR - page 108

    3-12 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Rack-Moun ting a Cisco 7200 VXR Rou ter Figur e 3-1 0 Installing th e Rac k-Mount Br ack ets on th e Rear of t he Chass is so the F ront Pr otr udes fro m the Rac k Figur e 3-1 1 Installing the Rac k -Mount Br ack ets on t he Rear of t ...

  • Cisco Systems 7200 VXR - page 109

    3-13 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Rack-M ounting a Cisco 7200 VXR Rout er Cautio n T o prev ent inju ry , rev ie w the safety prec autions in Chapter 2, “ Pre parin g fo r In stal latio n, ” before installing the ro uter in a rack. Installing the NPE-G1 and NPE-G ...

  • Cisco Systems 7200 VXR - page 110

    3-14 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router General Tabletop or Work bench I nstallation Installing the Chassis in the Rack After instal ling the brac kets on the chassi s, you mount the router by securing the rack-mo unt brackets to two posts or mount ing strips in the ra ck us ...

  • Cisco Systems 7200 VXR - page 111

    3-15 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Install ing th e Cable -Manag ement Brack ets • Port adapter and power supply fille r panels are installed. • The router will recei v e adequate v entilatio n (it is not being installed in an enclosed cab inet where ventilation i ...

  • Cisco Systems 7200 VXR - page 112

    3-16 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Installi ng the Cable-Ma nagemen t Brackets Note If you hav e an NPE-G 1 or NPE- G2, see the “Installin g the NPE-G1 and N PE-G2 Ca ble-Ma nageme nt Brackets on a Fron t-Moun ted Router” section on pag e 3-9 or the “Installi ng t ...

  • Cisco Systems 7200 VXR - page 113

    3-17 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Attaching a Chassis Gr ound Conn ection Step 4 Repeat Step 1 throu gh Step 3 for an y o ther p ort ad apter i nterf ace c ables installe d in the r outer . This com pletes th e proced ure for se curing po rt adapte r interf ace cable ...

  • Cisco Systems 7200 VXR - page 114

    3-18 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Attachin g a Chassis Gro und Connect ion Use the following procedur e to attach the grounding lug to the chas sis groundi ng receptac les on your router chassis: Figur e 3-1 4 At tachi ng a Gr oundin g Lug t o the Ch assis G ro unding ...

  • Cisco Systems 7200 VXR - page 115

    3-19 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connecti ng Por t Adapt er Cabl es Connecting Port Adapt er Cables The instructio ns for connectin g the cables for each port ad apter installe d in the Cisco 7200 VXR rout ers are c ontained in t he resp ective configurat ion no te ...

  • Cisco Systems 7200 VXR - page 116

    3-20 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Gigabit Etherne t SFP Modu le Connec tions The SFP port is a 10 00-Mbps optical interface in the f orm of an LC-type duplex port that supports IEEE 80 2.3z inter fa ces complia nt ...

  • Cisco Systems 7200 VXR - page 117

    3-21 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Ta b l e 3-2 provides c abling specifica tions for the SFP modu les that you install in the Gig abit Ethernet SFP ports. The NPE-G2 supports single Ethernet inter faces based o ...

  • Cisco Systems 7200 VXR - page 118

    3-22 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Ta b l e 3-3 prov ides SFP module po wer infor mation. Ta b l e 3-2 SFP Module P ort Cabli ng Speci fications SFP M od ule Wavelength (nm) Fibe r T ype Core Size (microns) Modal Ba ...

  • Cisco Systems 7200 VXR - page 119

    3-23 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Ta b l e 3-4 provides NPE-G2 CWDM SFP module configuration information. Mode-Conditioning Pa tch Cord Description A mode-conditioning patch cord can be used with the SFP-GE-L= ...

  • Cisco Systems 7200 VXR - page 120

    3-24 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Figur e 3-1 7 Mode-Co nditioning P atch Cord Assemb ly for an SFP Module The mo de-cond itionin g patch cord a ssembly i s composed of du plex optical f iber s, inclu ding a single ...

  • Cisco Systems 7200 VXR - page 121

    3-25 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les War ni ng Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare in ...

  • Cisco Systems 7200 VXR - page 122

    3-26 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Note Fiber-op tic cables are comme rcially a v ailable ; they are not a v ailable from Cisco Systems. GBIC Cabling and Connection Equip ment The GBIC receptac le is a 1000 -Mbps op ...

  • Cisco Systems 7200 VXR - page 123

    3-27 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les is 6.5 feet (2 m) , and the mi nimum li nk distance for the WS -G 54 87 or G BIC- ZX-SM is 6.2 mil es (10 km) with an 8 -dB atten uator in stalled a t each en d of the l ink. W ...

  • Cisco Systems 7200 VXR - page 124

    3-28 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Note Th e 1000BASE-ZX GBI C provides an optica l power budget of 21.5 d B. Y ou sho uld measur e your cable plant with an optica l loss test set to verif y that the optical loss of ...

  • Cisco Systems 7200 VXR - page 125

    3-29 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Note The mode-conditio ning patch cord is requir ed to comply with IEEE standards. The IE EE found that link distances could not be met with c ertain ty pes of f iber - optic c ...

  • Cisco Systems 7200 VXR - page 126

    3-30 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Connectin g to the I/O Contro ller Ethernet and Fast Ethern et Ports The I/ O con troller E thernet and Fast Ethernet port s use t wo types of ports, RJ-45 por ts or M II port s, d ...

  • Cisco Systems 7200 VXR - page 127

    3-31 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Note With referenc e to the RJ-45 pinout in T abl e 3-1, pr oper com mon-m ode line termin ations should b e used for the unu sed Category 5 UTP cabl e pairs 4/5 and 7/ 8. Comm ...

  • Cisco Systems 7200 VXR - page 128

    3-32 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Figur e 3-2 3 Ether net and F ast Ether n et S traig ht-Thr ough Cable Pinout, Ether net P ort t o a Hu b or Repeat er Figur e 3-2 4 Ether net and F ast Ether net Cr osso v e r Cab ...

  • Cisco Systems 7200 VXR - page 129

    3-33 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Fast Ethernet MII Connections The MII por t on the I/O controlle r is a 40-pin, D -shell-t ype conne ctor that is configurabl e for 100 megabit s per second (M bps). The M II p ...

  • Cisco Systems 7200 VXR - page 130

    3-34 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les The MII port uses two 56 scre w-type locks, called jack scre ws, to secure th e cable or transcei ver to the port. MI I cabl es and tr ansce i ver s ha ve knurle d thumbs cre ws th ...

  • Cisco Systems 7200 VXR - page 131

    3-35 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Note Both the console and the auxiliary ports are asynchronous se rial por ts; an y de vices co nnected to these ports mus t be capabl e of asynchr onous transm ission. (Async ...

  • Cisco Systems 7200 VXR - page 132

    3-36 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Figur e 3-2 8 Console a nd A uxiliary P ort DB-25 Conne ctions DB-25 Consol e Port Signal s and P inouts Both Dat a Set R eady (DSR) and D ata Carri er Detec t (DCD) are supp orted ...

  • Cisco Systems 7200 VXR - page 133

    3-37 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les DB-25 Auxi liary Port Cabling a nd Pinouts Ta b l e 3-1 5 lists the D B-25 auxili ary port sign als for the C720 0-I/O, C720 0-I/O-FE, and C7200-I/O- FE-MII I /O contro llers. ...

  • Cisco Systems 7200 VXR - page 134

    3-38 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les Figur e 3-2 9 Console a nd A uxiliary P ort RJ-45 Connect or Both ports are configured as async hronous ser ial ports. Figure 3-2 9 shows the R J-45 c onsole and auxiliary por t co ...

  • Cisco Systems 7200 VXR - page 135

    3-39 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connec ting I/ O Contr oller, NPE-G1, o r NPE-G2 Cab les Refer to Ta b l e 3-16 for a list of the pinouts used on th e RJ-45-to -DB-25 adapt ers, used with an RJ-45 cable, t o connect ter minals and mo dems to the Cisco 7200 VXR rou ...

  • Cisco Systems 7200 VXR - page 136

    3-40 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecti ng I/O Controlle r, NPE-G1, or NPE-G2 Cab les The Ci sco 7200 VXR r outers ship with a rol l-over cable. Connect ion to a ter minal or a mode m wil l requir e an RJ-45-t o-DB-25 adapter, and possi bly a DB-2 5-to-DB9 ad apter ...

  • Cisco Systems 7200 VXR - page 137

    3-41 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connecting Power Note When connecting to an auxil iary port on a Cisco 7200 VXR router , the port will not function at baud rates hi gher t han 19. 2k. If the bau d rate o n the connec ting device is set hig her than 19.2k, e ither g ...

  • Cisco Systems 7200 VXR - page 138

    3-42 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecting Po wer Connectin g AC-Input Pow er Connect a 280 W A C-input power supply as foll ows: Step 1 At the rear of the router , check that the powe r switch is in the of f (O) position. Step 2 Slide th e ca ble-ret ention clip up, ...

  • Cisco Systems 7200 VXR - page 139

    3-43 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 3 Installin g a Cisco 7200 VXR Router Connecting Power Connect a 280 W DC-inpu t po wer suppl y as follows: Note Th e color co ding of the DC- input power suppl y leads depen ds on the colo r coding of the DC power source at you r site. T ypic ally , gree n or green/ yel ...

  • Cisco Systems 7200 VXR - page 140

    3-44 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 3 Installing a Cisco 7200 VXR Router Connecting Po wer Figur e 3-3 3 Connecting DC-Input P ow er Step 6 Insert the stri pped e nd of t he +V lead al l the way i nto the +V l ead r eceptac le an d tight en the rece ptacle scre w using the same 3/16-in ch flat-blade scre wd ...

  • Cisco Systems 7200 VXR - page 141

    C HAPTER 4-1 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 4 Observing System Startup and Performing a Basic Configuration This cha pter describ es ho w to start th e system and per form a basic c onfiguration for your Cisco 7200 VXR router . The chapter contains the follo wing sections: • Checking Co nditions Prior to System ...

  • Cisco Systems 7200 VXR - page 142

    4-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Starting the System and Obs erving Initial Con ditions • All netw ork interf ace ca bles are c onnect ed to t he po rt adap ters. • A Comp actFlash Disk, Flash Disk or Flash memo ry ca rd is in stall ...

  • Cisco Systems 7200 VXR - page 143

    4-3 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er Y o u ha ve the option of p roceeding with the se tup f acility to conf igure th e inter faces, or e xiting from setup an d usin g configura tion co mman ds to configu ...

  • Cisco Systems 7200 VXR - page 144

    4-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter Perfor ming a Basic Config uration Using AutoInstall The AutoInstall process is designed to config ure the Cisco 7200 VXR router auto matically after connec tion to y ...

  • Cisco Systems 7200 VXR - page 145

    4-5 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er If the ser ial (W AN) cable is connec ted to the CSU /DSU and the ro uter do es not ha v e a conf igur ation stored in NVRA M, the router a ttempts to run AutoIn stall ...

  • Cisco Systems 7200 VXR - page 146

    4-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter The first two secti ons of the co nfiguration script (the banner an d the insta lled hardware ) appea r only at initial system startu p. On subsequent uses of the set ...

  • Cisco Systems 7200 VXR - page 147

    4-7 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er Step 6 For the follo wing quer ies, do not enable VIN ES, LA T , DECnet, CLNS, bridging, XNS, or Apollo: Configure Vines? [no]: Configure LAT? [no]: Configure DECnet? ...

  • Cisco Systems 7200 VXR - page 148

    4-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter Step 9 Sav e your settings to NVRAM. (See the “Saving the Running Con figuration to NVRA M” section on page 4-15 .) If you do not save the configuratio n setting ...

  • Cisco Systems 7200 VXR - page 149

    4-9 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er When using the GBIC media, there is also the additi onal negotiation auto command that is used to enab le the IEEE 802.1z Giga bit Etherne t (1000 Mbps ) autonegot iat ...

  • Cisco Systems 7200 VXR - page 150

    4-10 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter Debugging Cisco IOS prov ides tw o command s to pro vide in formation on your in terf aces: sho w interface Gigab itEth erne t 0/X (where X is 1, 2, or 3) and show c ...

  • Cisco Systems 7200 VXR - page 151

    4-11 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er Step 2 Determ ine if you a re going to ena ble I PX on t his in terface; i f you a re, e nter th e uniqu e IPX network number: Configure IPX on this interface? [no]: ...

  • Cisco Systems 7200 VXR - page 152

    4-12 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter Step 4 Sav e your settings to NVRAM. (See the “Saving the Running Con figuration to NVRA M” section on page 4-15 .) If you do not save the configuratio n setting ...

  • Cisco Systems 7200 VXR - page 153

    4-13 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Confi guring a Cisco 7200 VXR Rout er Is this interface in use? [yes]: Configure IP on this interface? [yes]: IP address for this interface: 1.1.1.10 Number of bits in subnet field [0]: 0 Class C network ...

  • Cisco Systems 7200 VXR - page 154

    4-14 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Configuring a Cisco 7200 VXR Ro uter half-duplex ip address 1.1.1.20 255.0.0.2 appletalk cable-range 0-0 0.0 appletalk discovery ! interface serial3/0 ip address 1.1.1.30 255.0.0.3 ip route-cache cbus n ...

  • Cisco Systems 7200 VXR - page 155

    4-15 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Perfo rming Other Config urat ion Ta sks Router(config)# interface serial slot/port Router(config-int)# In eith er configu ration m ode, yo u can no w ente r any cha nges t o the co nfiguration. Press Ctr ...

  • Cisco Systems 7200 VXR - page 156

    4-16 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Using show Command s to Check th e Installatio n • Load ing co nfiguration files o r system imag es using remote copy p rotocol (rcp) or T ri vial File T r ansfer Protoc ol (TFTP) • Relo ading t he ...

  • Cisco Systems 7200 VXR - page 157

    4-17 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Replac ing or Rec overing a Lost Passwo rd Replacing or Re covering a Lost Password This sec tion desc ribes how to rec ov er a lost enable or console login pas sword, and h o w to repl ace a lo st enabl ...

  • Cisco Systems 7200 VXR - page 158

    4-18 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Replacing or Re covering a Lost Password Details of th e Pass word Re covery Proced ure Complet e the fol lo wing steps to reco ver or rep lace a lost enable , enable secr et, or console lo gin password ...

  • Cisco Systems 7200 VXR - page 159

    4-19 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Replac ing or Rec overing a Lost Passwo rd The ena ble secr et pass word is encryp ted and ca nnot be reco ve red; it mu st be rep laced . The enable an d conso le login passw ords ma y be en crypted or c ...

  • Cisco Systems 7200 VXR - page 160

    4-20 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Viewing Your System Configurat ion Viewing Your System Configu ration Y o u can us e the show v ersion and the show diag commands to vie w in formati on specif ic to the ha rdware configurati on of y ou ...

  • Cisco Systems 7200 VXR - page 161

    4-21 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 4 Observing Syst em Startup an d Performing a Basic Con figuration Viewing Your System Configuration Hardware date code :20000413 Top Assy. Part Number :800-07114-01 PCB Serial Number :PROT------- EEPROM format version 4 EEPROM contents (hex): 0x00:04 FF 40 02 15 41 00 0 ...

  • Cisco Systems 7200 VXR - page 162

    4-22 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 4 Observing Sy stem Sta rtup an d Perfo rming a Basic Con figura tion Performin g Complex Configurat ions Performing Complex Config urations After yo u hav e install ed your Cisc o 7200 VXR router hardw are, check ed all e xter nal conne ctions, tu rned on the system powe ...

  • Cisco Systems 7200 VXR - page 163

    C HAPTER 5-1 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 5 Troubleshooting the Installation Yo u r C i s c o 7200 V XR route r went thr ough extensive testing befo re leaving the fac tory . H o wev er , if you encounter problems star ting the r outer , use the inform ation in this ch apter to h elp isolate th e cause o f the p ...

  • Cisco Systems 7200 VXR - page 164

    5-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 5 Tr oublesh ooting t he Ins talla tion Troubles hooting O vervie w Problem Solvin g Using a Su bsystems Ap proach The ke y to solvin g problems with the sy stem is isolati ng the problem to a specif ic subsyste m. The f irst step in so lving startu p problems is to com pa ...

  • Cisco Systems 7200 VXR - page 165

    5-3 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 5 Troublesh ooting the Inst allation Troublesh ooti ng Overview • Cooling su bsystem—T he chassis fan tray is the single com ponent in this subsyst em. The fans should be ope rating w henever system p o wer is on. Repl ace t he fan t ray if y ou de termine a fan is no ...

  • Cisco Systems 7200 VXR - page 166

    5-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 5 Tr oublesh ooting t he Ins talla tion Troubles hooting O vervie w I/O Controller LEDs The LEDs on the I/O controller should come on as follo ws: Note If you hav e an NPE-G 1 or NPE- G2 instal led wit hout an I/O co ntrolle r , go to the “NPE -G1 or NPE- G2 LEDs” sect ...

  • Cisco Systems 7200 VXR - page 167

    5-5 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 5 Troublesh ooting the Inst allation Troublesh ooti ng Overview • The M II EN L ED come s on after the ENABLED LED an d indic ates t hat t he Fast Ethernet port’ s M II port is initi alized and ena bled for opera tion by th e system, and conf igur ed for operatio n. T ...

  • Cisco Systems 7200 VXR - page 168

    5-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 5 Tr oublesh ooting t he Ins talla tion Troublesho oting the Power Subsystem • The USB port LEDs on the NPE-G2 are off when there is no acti vity . • The FE LINK LED on the NPE-G2 is solid green when there is no acti vity o n the management port . • The CF ACTV L ED ...

  • Cisco Systems 7200 VXR - page 169

    5-7 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 5 Troublesh ooting the Inst allation Troubl eshootin g the Pr ocessor Subsyst em – If the LE D still fail s to come on wh en the po wer supply is connected to a dif feren t po wer source with a new power cable, the power su pply is probab ly fault y . If a second power ...

  • Cisco Systems 7200 VXR - page 170

    5-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 5 Tr oublesh ooting t he Ins talla tion Troubles hooting t he Proce ssor Sub system • If th e au x il i ar y p o rt i s n ot f un c ti o ni n g p ro p er l y , ch e c k t he ba u d r a te . The auxiliary port will not function at baud rates higher t han 19.2k. If the bau ...

  • Cisco Systems 7200 VXR - page 171

    5-9 Cisco 7200 VXR Installation an d Configur ation Gui de OL-5013-09 Chapter 5 Troublesh ooting the Inst allation Troubl eshootin g the Pr ocessor Subsyst em Troublesho oting the Netwo rk Proces sing Engine or Network Se rvices Engine The pr ocedu res in t his sec tion assu me that the I/ O contr oller , networ k proce ssing engi ne or network ser ...

  • Cisco Systems 7200 VXR - page 172

    5-10 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Chapter 5 Tr oublesh ooting t he Ins talla tion Troubles hooting t he Cool ing Subs ystem – If the ENABLED LED on an indi vidual adapter is off, suspec t that the ada pter has pulle d away from the m idplane. Reseat the ad apter in its slot (you d o not ha ve to turn of f th e ...

  • Cisco Systems 7200 VXR - page 173

    A- 1 Cisco 7200 V XR Installation a nd Conf iguration Gui de OL-5013-09 APPENDIX A Configuration Register Information The follo wing information is f ound in this append ix: • Configuration Bi t Meanings , page A-1 • Displayin g the Configuration Register Whil e Running Cisco IO S, page A-5 • Dis playi ng t he C onf igurati on Re gister Whil ...

  • Cisco Systems 7200 VXR - page 174

    A- 2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Appendix A Configur atio n Register I nfor mation Configur ation Bit Meaning s Bits 0–3 The lowest four bit s of the processor configuration registe r (bits 3, 2, 1, an d 0) form the bo ot field. Ta b l e A- 2 pro vides informa tion about the bits settings. The b oot field spec ...

  • Cisco Systems 7200 VXR - page 175

    A-3 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Append ix A Configuration Reg ister Informati on Confi gurati on Bit Meani ngs in R OMmon. If b it 13 is n ot set, t he router will contin ue to netboot image s indef initely . The def ault setting for bit 13 is 0. If bit 13 is set, the system bo ots the boot h elper im age foun ...

  • Cisco Systems 7200 VXR - page 176

    A- 4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Appendix A Configur atio n Register I nfor mation Configur ation Bit Meaning s Bit 8 Bit 8 contr ols the co nsole Br eak key . Setting b it 8 (the fac tory default ) causes the processo r to ignore the console Break key . Cl earing bi t 8 causes the pr ocessor to interpret Bre ak ...

  • Cisco Systems 7200 VXR - page 177

    A-5 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Append ix A Configuration Reg ister Informati on Displaying the Con figurati on Regi ster Whi le Runni ng Cisco IO S Bit 15 Bit 15 e nables d iagnostic me ssages and ignores N VRAM c ontents. Displaying the Co nfigurat ion Register While Ru nning Cisc o IOS The co nfiguration re ...

  • Cisco Systems 7200 VXR - page 178

    A- 6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Appendix A Configur atio n Register I nfor mation Setting the Configuration Regis ter While Runni ng Cisco IOS 10 IP broadcasts with ones 09 Do not use secondary bootstrap 08 Break disabled 07 OEM disabled 06 Ignore configuration disabled 05 Fast boot disabled 04 Fan boot disable ...

  • Cisco Systems 7200 VXR - page 179

    A-7 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 Append ix A Configuration Reg ister Informati on Setting the Configuration Register While Running ROM Monitor enable “break/abort has effect”? y/n [n]: n enable “ignore system config info”? y/n [n]: n change console baud rate? y/n [n]: n change the boot characteristics? ...

  • Cisco Systems 7200 VXR - page 180

    A- 8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 Appendix A Configur atio n Register I nfor mation Setting the Conf iguration Regis ter While Runni ng ROM Monito r ...

  • Cisco Systems 7200 VXR - page 181

    IN-1 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 INDEX A AC-inp ut power su pply descript ion 50 See al so po wer supp ly acronym s list of ix addresses MAC 55 airf low chas sis cl earance 62 exhaust 62 internal 4 monitoring 62 AppleT alk config uring 7 ATM inter faces config uring 10 AutoInstall config uring 4 auxiliary port ...

  • Cisco Systems 7200 VXR - page 182

    Index IN-2 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 cleani ng informa tion for fi ber-opti c connect ors 10 clearan ce chass is 62 comm ands config -registe r 19 config termina l 14 config ure 14 config ure me mory 19 configur e terminal 19 confr eg 18 copy ru nning-conf ig startup -config 4, 15, 19 enab le 14, 18 enab le pa ...

  • Cisco Systems 7200 VXR - page 183

    Inde x IN-3 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 descript ion 51 See al so po wer supp ly DC power shutdown 59 DC return connect ion (DC-1) cautio n 49, 43 displays enviro nmenta l 62 distan ce limitat ions transmission 9 DRAM SIMM ca uti ons and co nfig ura tions 26, 30, 31 E EEPRO M MAC a ddress ba nk 57 electro magn ...

  • Cisco Systems 7200 VXR - page 184

    Index IN-4 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 H handles NPE 6, 9 NSE 6, 9 port adapte r 54 power suppl y 49 hardware addresses 55 hardware addre sses See als o MAC addr esses humidity requir ements 7 I I/O contro ller C7200-I/ O 37 C7200-I/ O-2FE/E 34 C7200-I/ O-FE 35, 36 C7200-I/ O-FE-M II 39 C7200-I /O-GE+E 33 cable ...

  • Cisco Systems 7200 VXR - page 185

    Inde x IN-5 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 using fo r trou bleshooting I/O contro ller 4 port adap ters 6 power suppl y 3 line con 0 comma nd 19 M MAC, ad dress es 55 MAC addr esses, description 57 memory CompactFlash D isk 52 Flash Disk 52 Fla sh memo ry ca rd 52 NPE 11, 13 NSE 11, 13 messages enviro nmenta l 62 ...

  • Cisco Systems 7200 VXR - page 186

    Index IN-6 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 damage 59 monitori ng 59 preven ting 4 P Parallel eX pres s Forward ing pro cessor See PXF processor password recove ring lost 17 password c ommand 19 physica l descripti on CompactFlash D isk 52 Flash Disk 52 Fla sh memo ry ca rds 52 I/O contro ller 32 port adap ters 47 po ...

  • Cisco Systems 7200 VXR - page 187

    Inde x IN-7 Cisco 7200 V XR Installat ion and Conf igurati on Guide OL-5013-09 troublesh ooting 9 R rack-mount installati on 1 rack-m ount kit hardware 12 installati on 2 rack s equipm ent 5 reload command 19 rep lacin g or re cove ring a lost pa ssw ord 17 rese t comm and 18 review ing chan ges to conf igurat ion 15 RIP config uring 7 Rout ing Inf ...

  • Cisco Systems 7200 VXR - page 188

    Index IN-8 Cisco 7200 VXR Installation an d Configur ation Guide OL-5013-09 system 2 troublesh ooting 3 status DC power 59 enviro nmenta l 62, 4 interfac es 55 subsystem ( troublesh ooting) I/O contro ller 7 NPE 9 port adap ters 9 subsystem s for t roubleshoo ting cooling 3, 10 power 2, 6 processor 3 switch power 51 synchrono us serial in terfaces ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 7200 VXR can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 7200 VXR manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 7200 VXR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 7200 VXR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 7200 VXR, service manual, brief instructions and user manuals Cisco Systems 7200 VXR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 7200 VXR.

Similar manuals

A complete manual for the device Cisco Systems 7200 VXR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 7200 VXR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 7200 VXR.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 7200 VXR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 7200 VXR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 7200 VXR, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 7200 VXR - which should help us in our first steps of using Cisco Systems 7200 VXR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 7200 VXR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 7200 VXR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 7200 VXR?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 7200 VXR, ask a question using the form below. If a user had a similar problem with Cisco Systems 7200 VXR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)