English dropdown-ico

Manual Canon 9518B002

14 pages 1.17 mb
Download

Go to site of 14

Summary
  • Canon 9518B002 - page 1

    EF16-35mm f/4L IS USM Instructions ENG C OP Y ...

  • Canon 9518B002 - page 2

    ENG-1 Thank you for purchasing a Canon product. Canon’s EF16-35mm f/4L IS USM is a high- performance ultra-wide angle zoom lens, for use with EOS cameras. The lens is installed with an Image Stabilizer.  “IS” stands for Image Stabilizer.  “USM” stands for Ultrasonic Motor. Features 1. Equipped with an Image Stabilizer that provides ...

  • Canon 9518B002 - page 3

    ENG-2 Safety Precautions Safety Precautions  Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous.  Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. ...

  • Canon 9518B002 - page 4

    ENG-3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modications to the equipment unless ot ...

  • Canon 9518B002 - page 5

    ENG-4 Nomenclature  For de tailed info rmati on, refe rence pag e number s are provi ded in pare nthes es ( → **). Focus mode switch ( → 6) Distance scale ( → 7) Zoom ring ( → 6) Rubber ring ( → 5) Hood mount ( → 10) Filter Mounting Thread ( → 11) Focusing ring ( → 6) Image stabilizer switch ( → 8) Lens mount index ( → 5) Con ...

  • Canon 9518B002 - page 6

    ENG-5 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced dust- and water-resistance. The rubber ring may cause slight abrasions around the camera’s lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is ...

  • Canon 9518B002 - page 7

    ENG-6 2. Setting the Focus Mode 3. Zooming After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) T o shoot in autofocus (AF) mode, set the focus mode switch to AF . T o shoot in manual focus (MF) mode, set the focus mode switch to MF , and focus by turni ...

  • Canon 9518B002 - page 8

    ENG-7 4. Innity Compensation Mark For accurate manual focusing of subjects at innity , look through the viewnder or look at the magnied image* on the LCD screen while rotating the focusing ring. T o compensate for shifting of the innity focus point that results from changes in temperature. The innity position at normal temperature ...

  • Canon 9518B002 - page 9

    ENG-8 6. Image Stabilizer Y ou can use the image stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects and following shots). OFF ON The image stabilizer in this lens is effective for hand-held shots under the following conditions.  In semi-darkened areas ...

  • Canon 9518B002 - page 10

    ENG-9  When shooting a still subject, it compensates for camera shake in all directions.  It compensates for vertical camera shake during following shots in a horizontal direction, and compensates for horizontal camera shake during following shots in a vertical direction.  When you use a tripod, the Image Stabilizer should be turned off to ...

  • Canon 9518B002 - page 11

    ENG-10 7. Hood ●Attaching T o attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens’ red dot is aligned with the hood’s stop position mark. ●Removing T o remove the hood, hold down the button on the side and turn the hood in the directi ...

  • Canon 9518B002 - page 12

    ENG-1 1 10. Extension T ubes (Sold separately) 8. Filters (Sold separately) Y ou can attach extension tube EF12 II or EF25 II for magnied shots. The shooting distance and magnication are shown below . MF mode is recommended for accurate focusing. Focusing Distance Range (mm) Magnication (×) Close distance Long distance Close distance Long ...

  • Canon 9518B002 - page 13

    ENG-12 Specications  The lens leng th is measu red from the mou nt surfa ce to the fron t end of the lens . Add 24.2 mm when inc luding the len s cap and dus t cap.  The size and wei ght list ed are for the lens only , exce pt as indic ated.  Exten ders cann ot be used wi th this len s.  Apert ure setti ngs are spe cied on the ca ...

  • Canon 9518B002 - page 14

    CT1-8597-000 0414Ni © CANON INC. 2014 C OP Y ...

Manufacturer Canon Category Camera Lens

Documents that we receive from a manufacturer of a Canon 9518B002 can be divided into several groups. They are, among others:
- Canon technical drawings
- 9518B002 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon 9518B002
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon 9518B002.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon 9518B002, service manual, brief instructions and user manuals Canon 9518B002. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon 9518B002.

Similar manuals

A complete manual for the device Canon 9518B002, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon 9518B002 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon 9518B002.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon 9518B002 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon 9518B002, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon 9518B002, that we can find in the current document
3. Tips how to use the basic functions of the device Canon 9518B002 - which should help us in our first steps of using Canon 9518B002
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon 9518B002
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon 9518B002 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon 9518B002?

Use the form below

If you did not solve your problem by using a manual Canon 9518B002, ask a question using the form below. If a user had a similar problem with Canon 9518B002 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)