Manual Denon AVC-3808

44 pages 0.73 mb
Download

Go to site of 44

Summary
  • Denon AVC-3808 - page 1

    - 1 - DENON AVR control protocol Ver. 5.2.0_a Application model : AVR-3808/AVC-3808 Application terminal: RS-232C/ Ethernet Connector specificat ion Ⅰ . RS-232C Connector type: DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Co mmon(GND) , 4,6,7,8,9pin : NC ) Communication format: Synchron ...

  • Denon AVC-3808 - page 2

    - 2 - Ⅱ . Ethernet Connector type : RJ-45(10BASE-T/100BASE-TX) Communication format : Communication system : A half duplex Communication speed : 10Mbps/100Mbps Communication port : TCP port 23 (telnet) Communication data length : 135bytes (maximum) PC AVR/AVC Ethernet Cross cable PC AVR/AVC HUB Ethernet Straight cable Ethernet Straight cable ...

  • Denon AVC-3808 - page 3

    - 3 - NETWORK SETUP of AVR-4308 >Procedure of Network Setup mode. (1)Press SYSTEM SETUP button, then System Setup Me nu appears on FL-display(and GUI) (2)Select “Network Setup > Detail” . (3)Set parameters described below. <DHCP> "ON"---Use this setting when DHCP server is on the local network. "OFF"---Use this s ...

  • Denon AVC-3808 - page 4

    - 4 - Ⅱ . Ethernet Connector type : RJ-45(10BASE-T/100BASE-TX) Communication format : Communication system : A half duplex Communication speed : 10Mbps/100Mbps Communication port : TCP port 23 (telnet) Communication data length : 135bytes (maximum) PC AVR/AVC Ethernet Cross cable PC AVR/AVC HUB Ethernet Straight cable Ethernet Straight cable ...

  • Denon AVC-3808 - page 5

    - 5 - NETWORK SETUP of AVR-3808 >Procedure of Network Setup mode. (1)Press SYSTEM SETUP button, then System Setup Me nu appears on FL-display(and GUI) (2)Select “Network Setup > Detail” . (3)Set parameters described below. <DHCP> "ON"---Use this setting when DHCP server is on the local network. "OFF"---Use this s ...

  • Denon AVC-3808 - page 6

    - 6 - Protocol speci fication The following three data forms are defined. COMMAND : The message sent to a system(AVR) from a controlle r(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller (Touch Panel etc. ) from a system (AVR) The result is sent, when a system is operated directly and a sta ...

  • Denon AVC-3808 - page 7

    - 7 - The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround Mode Set to STEREO MVUP<CR> : Master Volume UP PWON<CR> : system PoWer ON PWSTANDBY<CR> : system PoWer STANDBY SI?<CR> : Request command for now playing input so urce >> Return RES ...

  • Denon AVC-3808 - page 8

    - 8 - Others A) COMMAND is receivable also during transmission of EVENT . B) Since CHANNEL VOLUME changes simultaneou sly when the SURROUND MODE changes, the value of t he channel volume of all channels returns as EVENT . C) CHANNEL VOLUME returns the data of A LL channels by the presen t SURROUND MODE also including an intact channel. In this case ...

  • Denon AVC-3808 - page 9

    - 9 - COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/S TANDBY change PWON<CR> STANDBY PWSTANDBY<CR> ? Return PW Status PW?<CR> MV UP MASTER VOL UME UP/DOWN , direct change to **dB MVUP<CR> DOWN MVDOWN<CR> ** **:00 to 9 9 by ASCII , 80=0dB, 99=---(MIN) MV80<CR> ? Return MV Status MV?& ...

  • Denon AVC-3808 - page 10

    - 10 - COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR> SB ** **:00 to 99 by ASCII , 50=0dB CVSB 50<CR> ? Return CV Status CV?<CR> MU ON OUTPUT MUTE ON/OFF change MUON<CR> OFF MUOFF<CR> ? Return MU Status MU?<CR> SI PHONO Select INPUT source SIPHONO ...

  • Denon AVC-3808 - page 11

    - 1 1 - COMMAND PARAMETER function example SD AUTO set AUTO mode (Prior ity:HDMI>>DIGITAL>>ANALOG) SDAUTO<CR> HDMI set force HDMI INPUT mode SDHDMI<CR> DIGITAL set force DIGITAL INPUT (Optical,Coaxial)mode SDDIGITAL<CR> ANALOG set force ANALOG INPUT mode SDANALOG<CR> EXT.IN-1 ---Set EXT.IN mode at AVR-3808 SDEXT. ...

  • Denon AVC-3808 - page 12

    - 12 - COMMAND PARAMETER function example MS CLASSIC CONCERT MSCLASSIC CONCERT<CR> MONO MOVIE MSMONO MOVIE<CR> MATRIX MSMATRIX<CR> VIDEO GAME MSVIDEO GAME<CR> VIRTUAL MSVIRTUAL<CR> MPEG2 AAC ---Invalid at AVR model (Japan model only) MSMPEG2 AAC<CR> ? Return MS Status MS?<CR> QUICK1 QUICK SELECT 1-3 MODE SE ...

  • Denon AVC-3808 - page 13

    - 13 - COMMAND PARAMETER function example PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR> TONE DEFEAT OFF TONE DEFEAT ON/OFF PSTONE DEFEAT OFF<CR> TONE DEFEAT ? Return PSTONE DEFEAT Status PSTONE DEFEAT ?<CR> SB:MTRX ON SURROUND BACK SP MODE set PSSB:MTRX ON<CR> SB:NON MTRX PSSB:NON MTRX<CR> SB:PL2xCINEMA PSSB ...

  • Denon AVC-3808 - page 14

    - 14 - COMMAND PARAMETER function example PS TRE UP TREBLE UP/DOWN , direct change to **dB PSTRE UP<CR> TRE DOWN **:00 to 99 by ASCII , 50=0dB PSTRE DOWN<CR> TRE ** ---AVR-3808 can be operated from -6 to +6(44 to 56 ) PSTRE 50<CR> TRE ? Return PSTRE Status PSTRE ?<CR> DRC AUTO DRC direct change PSDRC AUTO<CR> DRC LOW P ...

  • Denon AVC-3808 - page 15

    - 15 - COMMAND PARAMETER function example PS PAN ON PANORAMA O N/OFF PSPAN ON<CR> PAN OFF PSPAN OFF<CR> PAN ? Return PSPAN Status PSPAN ?<CR> DIM UP DIMENSION UP/DOWN , direct change to **dB PSDIM UP<CR> DIM DOWN **:00 to 99 by ASCII , 00=0, PSDIM DOWN<CR> DIM ** ---AVR-3808 can be operated from 0 to 6 PSDIM **<CR&g ...

  • Denon AVC-3808 - page 16

    - 16 - COMMAND PARAMETER function example PS NIGHT OFF NIGHT MODE direct change PSNIGHT OFF<CR> NIGHT LOW PSNIGHT LOW<CR> NIGHT MID PSNIGHT MID<CR> NIGHT HI PSNIGHT HI<CR> NIGHT ? Return PSNIGHT Status PSNIGHT ?<CR> RSTR OFF AUDIO RESTORER direct change PSRSTR OFF<CR> RSTR MODE1 PSRSTR MODE1<CR> RSTR MODE2 ...

  • Denon AVC-3808 - page 17

    - 17 - Z2 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) COMMAND PARAMETER function example Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-3808 Z2PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND. Z2IPOD<CR> SOURCE MULTI ZONE-2 mode cancel at AVR-38 ...

  • Denon AVC-3808 - page 18

    - 18 - Z2 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model. COMMAND PARAMETER function example Z2PS BAS UP ZONE2 BASS UP/DOWN , direct change to **dB Z2PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII , 00=0dB Z2PSBAS DOWN<CR> BAS ** ---AVR-3808 can be operated from -10 to +10(40 to 60) Z ...

  • Denon AVC-3808 - page 19

    - 19 - Z3 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model COMMAND PARAMETER function example Z3 PHONO MULTI ZONE-3 mode set , and select source at AVR-3808 Z3PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND. Z3IPOD<CR> SOURCE MULTI ZONE-3 mo ...

  • Denon AVC-3808 - page 20

    - 20 - Z3 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model COMMAND PARAMETER function example Z3PS BAS UP ZONE3 BASS UP/DOWN , direct change to **dB Z3PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII , 00=0dB Z3PSBAS DOWN<CR> BAS ** ---AVR-3808 can be operated fr om -10 to +10(40 to 60) Z ...

  • Denon AVC-3808 - page 21

    - 21 - ※ ANALOG TUNER Control (AVR model only) COMMAND PARAMETER function example TF ANUP TUNER Frequency UP/DOWN TFANUP<CR> ANDOWN TFANDOWN<CR> AN****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) TFAN105000<CR> (1050.00kHz at AM) AN? Return TF Status TFAN?<CR> TP A ...

  • Denon AVC-3808 - page 22

    - 22 - ※ XM Control(North America model only) COMMAND PARAMETER function example TF XMUP XM Channel UP/DOWN TFXMUP<CR> XMDOWN TFXMDOWN<CR> XM*** (3 digits) --- ***:XM CH No. TFXM001<CR> (XM001 CH at XM) XM? Return TFXM Status TFXM?<CR> TP XMUP XM PRESET CH UP/DOWN , direct change to No.** TPXMUP<CR> XMDOWN TPXMDOWN&l ...

  • Denon AVC-3808 - page 23

    - 23 - ※ iRadio/mServer/USB Extended Control COMMAND PARAMETER function example SI USB Select INPUT source NET/USB and USB Start Playback SIUSB<CR> Z2 USB Select MULTI ZONE-2 source NET/USB and USB Start P layback (Except Japan model) Z2USB<CR> Z3 USB Select MULTI ZONE-3 source NET/USB and USB Start P layback Z3USB<CR> NS 90 “ ...

  • Denon AVC-3808 - page 24

    - 24 - ※ iPod Extended Control COMMAND PARAMETER function example IP 90 “Cursor Up” Control IP90<CR> 91 “Cursor Down” Control IP91<CR> 92 “Cursor Left” Control IP92<CR> 93 “Cursor Right” Control IP93<CR> 94 “Enter (Play/Pause)” Control IP94<CR> 9A “Play/Pause” Control IP9A<CR> 9C “Stop ...

  • Denon AVC-3808 - page 25

    - 25 - ※ Cursol/Enter/Menu(Setup) COMMAND PARAMETER function example MN CUP “Cursor Up ” Control MNCUP<CR> CDN “Cursor Down” Control MNCDN<CR> CLT “Cursor Left” Control MNCLT<CR> CRT “Cursor Right” Control MNCRT<CR> ENT “Enter” Control MNENT<CR> RTN “RETURN” Control MNRTN<CR> MEN ON “G ...

  • Denon AVC-3808 - page 26

    - 26 - ※ Remote Lock/Panel Lock COMMAND PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON SYPANEL+V LOCK ...

  • Denon AVC-3808 - page 27

    - 27 - EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> MV ** MASTER VOLUME change , **:00 to 99 by ASCII MV80<CR> 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 99 = ---(MIN) CV FL ** CHANNEL VOLUME change , **:00,38 to 62 by ASCII CVFL 50<CR> FR ** 62 ...

  • Denon AVC-3808 - page 28

    - 28 - EVENT PARAMETER function example SI NET/USB SINET/USB<CR> XM (North America model Only) SIHDRADIO<CR> USB SIUSB<CR> IPOD SIIPOD<CR> ZM ON MAIN-ZONE ON/OFF change ZMON<CR> OFF ZMOFF<CR> SR PHONO REC SELECT source change SRPHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of S ...

  • Denon AVC-3808 - page 29

    - 29 - EVENT PARAMETER function example MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO MSSTEREO<CR> MULTI CH IN MSMULTI CH IN<CR> MULTI CH IN +PL2x C MSM CH IN+PL2X C<CR> MULTI CH IN +PL2x M MSM CH IN+PL2X M<CR> MULTI CH DIRECT MSMULTI CH DIRECT<CR> MULTI CH DIRECT +PL2x C ...

  • Denon AVC-3808 - page 30

    - 30 - EVENT PARAMETER function example MS DTS NEO:6 C MSDTS NEO:6 C<CR> DTS NEO:6 M MSDTS NEO:6 M<CR> DTS SURROUND MSDTS SURROUND<CR> DTS ES DSCRT6.1 MSDTS ES DSCRT6.1<CR> DTS ES MTRX6.1 MSDTS ES MTRX6.1<CR> DTS+PL2x C MSDTS+PL2X C<CR> DTS+PL2x M MSDTS+PL2X M<CR> DTS+NEO:6 MSDTS+NEO:6<CR> DTS96/24 MS ...

  • Denon AVC-3808 - page 31

    - 31 - EVENT PARAMETER function example MS NEURAL (North America model Only) MSNEURAL<CR> DOLBY D+ MSDOLBY D+ <CR> DOLBY D+ +EX MSDOLBY D+ +EX<CR> DOLBY D+ +PL2x C MSDOLBY D+ +PL2X C<CR> DOLBY D+ +PL2x M MSDOLBY D+ +PL2X M<CR> DOLBY TRUEHD MSDOLBY HD<CR> DOLBY HD MSDOLBY HD <CR> DOLBY HD+EX MSDOLBY HD +EX&l ...

  • Denon AVC-3808 - page 32

    - 32 - EVENT PARAMETER function example PS TONE DEFEAT ON TONE DEFEAT ON/OFF change PSTONE DEFEAT ON<CR> TONE DEFEAT OFF PSTONE DEFEAT OFF<CR> SB:MTRX ON SURROUND BACK MODE change PSSB:MTRX ON<CR> SB:NON MTRX PSSB:NON MTRX<CR> SB:PL2xC PSSB:PL2X CINEMA<CR> SB:PL2xM PSSB:PL2X MUSIC<CR> SB:ON PSSB:ON<CR> SB:O ...

  • Denon AVC-3808 - page 33

    - 33 - EVENT PARAMETER function example PS DRC AUTO DRC change PSDRC AUTO<CR> DRC LOW PSDRC LOW<CR> DRC MID PSDRC MID<CR> DRC HI PSDRC HI<CR> DRC OFF PSDRC OFF<CR> DCO OFF D.COMP change PSDCO OFF<CR> DCO MID PSDCO MID<CR> DCO LOW PSDCO LOW<CR> DCO MID PSDCO MID<CR> DCO HIGH PSDCO HIGH<CR> ...

  • Denon AVC-3808 - page 34

    - 34 - EVENT PARAMETER function example PS DELAY *** AUDIO DELAY change, ***:000 to 999 by ASCII PSDELAY 200<CR> ---AVR-3808 : 200=200ms ( MAX ) 100=100ms, 000=0ms NIGHT OFF NIGHT MODE change PSNIGHT OFF<CR> NIGHT LOW PSNIGHT LOW<CR> NIGHT MID PSNIGHT MID<CR> NIGHT HI PSNIGHT HI<CR> RSTR OFF AUDIO RESTORER change ...

  • Denon AVC-3808 - page 35

    - 35 - EVENT PARAMETER function example Z2 PHONO MULTI ZONE-2 source change Z2PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND. Z2IPOD<CR> SOURCE MULTI ZONE-2 mode cancel Z2SOURCE<CR> ** MULTI ZONE-2 VOLUME change , **:10 to 99 by ASCII Z280<CR> 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 99 ...

  • Denon AVC-3808 - page 36

    - 36 - EVENT PARAMETER function example Z3 PHONO MULTI ZONE-3 source change Z3PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMA ND. Z3IPOD<CR> SOURCE MULTI ZONE-3 mode cancel Z3SOURCE<CR> ** MULTI ZONE-3 VOLUME change , **:10 to 99 by ASCII Z380<CR> 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 99 ...

  • Denon AVC-3808 - page 37

    - 37 - ※ ANALOG TUNER Control(AVR model only) EVENT PARAMETER function example TF AN****** (6 digits) TUNER Frequency change TFAN105000<CR> --- ****.** kHz at AM band (1050.00kHz at AM) ****.** MHz at FM band TP AN**(PRESE T No.) TUNER PRESET change to No.** TPANA1<CR> (PRESET No.”A1”) TM TUNER BAND , MODE change ANAM ---Band set ...

  • Denon AVC-3808 - page 38

    - 38 - ※ iRadio/mServer/USB Extended Control EVENT PARAMETER function NSA Onscreen Display Information is Answered By the NSA Command. 0 Display Line1 Information NSA0**************_?????<CR> 1 Display Line3 Information NSA1 ※ ************_?????<CR> 2 Display Line4 Information NSA2 ※ ************_?????<CR> 3 Display Line5 In ...

  • Denon AVC-3808 - page 39

    - 39 - EVENT PARAMETER function NSE Onscreen Display Information(mserver/iRadio) is Answered By the NSE Command. 0 Display Line1 Information NSE0**************_?????<CR> 1 Display Line3 Information NSE1 ※ ************_?????<CR> 2 Display Line4 Information NSE2 ※ ************_?????<CR> 3 Display Line5 Information NSE3 ※ ***** ...

  • Denon AVC-3808 - page 40

    - 40 - ※ iPod Extended Control EVENT PARAMETER function IPA Onscreen Display Information is Answered By the IPA Command. 0 Display Line1 Information IPA0***************_???<CR> 1 Display Line3 Information IPA1 ※ *************_???<CR> 2 Display Line4 Information IPA2 ※ *************_???<CR> 3 Display Line5 Information IPA3 ? ...

  • Denon AVC-3808 - page 41

    - 41 - EVENT PARAMETER function IPA <example1> IPA0Artist??????????????????<CR> IPA1 ※ Ana Caram_????????????<CR> IPA2 ※ Badi Assad_???????????<CR> IPA3 ※ Christy Baron_????????<CR> IPA4 ※ Marta Gomez_??????????<CR> IPA5 ※ Rebecca Pidgeon_??????<CR> IPA6 ※ Sara K_???????????????<CR> IPA7 ? ...

  • Denon AVC-3808 - page 42

    - 42 - EVENT PARAMETER function IPE Onscreen Display Information(iPod) is Answered By the IPA Command. 0 Display Line1 Information IPE0***************_???<CR> 1 Display Line3 Information IPE1 ※ *************_???<CR> 2 Display Line4 Information IPE2 ※ *************_???<CR> 3 Display Line5 Information IPE3 ※ *************_???& ...

  • Denon AVC-3808 - page 43

    - 43 - EVENT PARAMETER function IPE <example1> IPE0Artist??????????????????<CR> IPE1 ※ Ana Caram_????????????<CR> IPE2 ※ Badi Assad_???????????<CR> IPE3 ※ Christy Baron_????????<CR> IPE4 ※ Marta Gomez_??????????<CR> IPE5 ※ Rebecca Pidgeon_??????<CR> IPE6 ※ Sara K_???????????????<CR> IPE7 ? ...

  • Denon AVC-3808 - page 44

    - 44 - ※ Remote Lock/Panel Lock EVENT PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON PANEL BUTTON & MASTER VOL. CONTROL LOCK ON SYPANEL+V LOCK O ...

Manufacturer Denon Category Network Card

Documents that we receive from a manufacturer of a Denon AVC-3808 can be divided into several groups. They are, among others:
- Denon technical drawings
- AVC-3808 manuals
- Denon product data sheets
- information booklets
- or energy labels Denon AVC-3808
All of them are important, but the most important information from the point of view of use of the device are in the user manual Denon AVC-3808.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Denon AVC-3808, service manual, brief instructions and user manuals Denon AVC-3808. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Denon AVC-3808.

Similar manuals

A complete manual for the device Denon AVC-3808, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Denon AVC-3808 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Denon AVC-3808.

A complete Denon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Denon AVC-3808 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Denon AVC-3808, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Denon AVC-3808, that we can find in the current document
3. Tips how to use the basic functions of the device Denon AVC-3808 - which should help us in our first steps of using Denon AVC-3808
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Denon AVC-3808
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Denon AVC-3808 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Denon AVC-3808?

Use the form below

If you did not solve your problem by using a manual Denon AVC-3808, ask a question using the form below. If a user had a similar problem with Denon AVC-3808 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)